Pull ARM updates from Russell King:

 - Generalise byte swapping assembly

 - Update debug addresses for STI

 - Validate start of physical memory with DTB

 - Do not clear SCTLR.nTLSMD in decompressor

 - amba/locomo/sa1111 devices remove method return type is void

 - address markers for KASAN in page table dump

* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 9065/1: OABI compat: fix build when EPOLL is not enabled
  ARM: 9055/1: mailbox: arm_mhuv2: make remove callback return void
  amba: Make use of bus_type functions
  amba: Make the remove callback return void
  vfio: platform: simplify device removal
  amba: reorder functions
  amba: Fix resource leak for drivers without .remove
  ARM: 9054/1: arch/arm/mm/mmu.c: Remove duplicate header
  ARM: 9053/1: arm/mm/ptdump:Add address markers for KASAN regions
  ARM: 9051/1: vdso: remove unneded extra-y addition
  ARM: 9050/1: Kconfig: Select ARCH_HAVE_NMI_SAFE_CMPXCHG where possible
  ARM: 9049/1: locomo: make locomo bus's remove callback return void
  ARM: 9048/1: sa1111: make sa1111 bus's remove callback return void
  ARM: 9047/1: smp: remove unused variable
  ARM: 9046/1: decompressor: Do not clear SCTLR.nTLSMD for ARMv7+ cores
  ARM: 9045/1: uncompress: Validate start of physical memory against passed DTB
  ARM: 9042/1: debug: no uncompress debugging while semihosting
  ARM: 9041/1: sti LL_UART: add STiH418 SBC UART0 support
  ARM: 9040/1: use DEBUG_UART_PHYS and DEBUG_UART_VIRT for sti LL_UART
  ARM: 9039/1: assembler: generalize byte swapping macro into rev_l

Pull timer fixes from Thomas Gleixner:
 "A small set of clockevent fixes which fell through the cracks before
  the 5.11 release:

   - Ensure a clock is enabled on sh_cmt

   - Trivial compile fail and compile warning fixes"

* tag 'timers-urgent-2021-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  clocksource/drivers/mxs_timer: Add missing semicolon when DEBUG is defined
  clocksource/drivers/sh_cmt: Make sure channel clock supply is enabled
  clocksource/drivers/ixp4xx: Select TIMER_OF when needed

Pull tracing updates from Steven Rostedt:

 - Update to the way irqs and preemption is tracked via the trace event
   PC field

 - Fix handling of unregistering event failing due to allocate memory.
   This is only triggered by failure injection, as it is pretty much
   guaranteed to have less than a page allocation succeed.

 - Do not show the useless "filter" or "enable" files for the "ftrace"
   trace system, as they have no effect on doing anything.

 - Add a warning if kprobes are registered more than once.

 - Synthetic events now have their fields parsed by semicolons. Old
   formats without semicolons will still work, but new features will
   require them.

 - New option to allow trace events to show %p without hashing in trace
   file. The trace file can only be read by root, and reading the raw
   event buffer did not have any pointers hashed, so this does not
   expose anything new.

 - New directory in tools called tools/tracing, where a new tool that
   reads sequential latency reports from the ftrace latency tracers.

 - Other minor fixes and cleanups.

* tag 'trace-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (33 commits)
  kprobes: Fix to delay the kprobes jump optimization
  tracing/tools: Add the latency-collector to tools directory
  tracing: Make hash-ptr option default
  tracing: Add ptr-hash option to show the hashed pointer value
  tracing: Update the stage 3 of trace event macro comment
  tracing: Show real address for trace event arguments
  selftests/ftrace: Add '!event' synthetic event syntax check
  selftests/ftrace: Update synthetic event syntax errors
  tracing: Add a backward-compatibility check for synthetic event creation
  tracing: Update synth command errors
  tracing: Rework synthetic event command parsing
  tracing/dynevent: Delegate parsing to create function
  kprobes: Warn if the kprobe is reregistered
  ftrace: Remove unused ftrace_force_update()
  tracepoints: Code clean up
  tracepoints: Do not punish non static call users
  tracepoints: Remove unnecessary "data_args" macro parameter
  tracing: Do not create "enable" or "filter" files for ftrace event subsystem
  kernel: trace: preemptirq_delay_test: add cpu affinity
  tracepoint: Do not fail unregistering a probe due to memory failure
  ...

Merge tag 'perf-tools-for-v5.12-2020-02-19' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull perf tool updates from Arnaldo Carvalho de Melo:
 "New features:

   - Support instruction latency in 'perf report', with both memory
     latency (weight) and instruction latency information, users can
     locate expensive load instructions and understand time spent in
     different stages.

   - Extend 'perf c2c' to display the number of loads which were blocked
     by data or address conflict.

   - Add 'perf stat' support for L2 topdown events in systems such as
     Intel's Sapphire rapids server.

   - Add support for PERF_SAMPLE_CODE_PAGE_SIZE in various tools, as a
     sort key, for instance:

        perf report --stdio --sort=comm,symbol,code_page_size

   - New 'perf daemon' command to run long running sessions while
     providing a way to control the enablement of events without
     restarting a traditional 'perf record' session.

   - Enable counting events for BPF programs in 'perf stat' just like
     for other targets (tid, cgroup, cpu, etc), e.g.:

        # perf stat -e ref-cycles,cycles -b 254 -I 1000
           1.487903822            115,200      ref-cycles
           1.487903822             86,012      cycles
           2.489147029             80,560      ref-cycles
           2.489147029             73,784      cycles
        ^C

     The example above counts 'cycles' and 'ref-cycles' of BPF program
     of id 254. It is similar to bpftool-prog-profile command, but more
     flexible.

   - Support the new layout for PERF_RECORD_MMAP2 to carry the DSO
     build-id using infrastructure generalised from the eBPF subsystem,
     removing the need for traversing the perf.data file to collect
     build-ids at the end of 'perf record' sessions and helping with
     long running sessions where binaries can get replaced in updates,
     leading to possible mis-resolution of symbols.

   - Support filtering by hex address in 'perf script'.

   - Support DSO filter in 'perf script', like in other perf tools.

   - Add namespaces support to 'perf inject'

   - Add support for SDT (Dtrace Style Markers) events on ARM64.

  perf record:

   - Fix handling of eventfd() when draining a buffer in 'perf record'.

   - Improvements to the generation of metadata events for pre-existing
     threads (mmaps, comm, etc), speeding up the work done at the start
     of system wide or per CPU 'perf record' sessions.

  Hardware tracing:

   - Initial support for tracing KVM with Intel PT.

   - Intel PT fixes for IPC

   - Support Intel PT PSB (synchronization packets) events.

   - Automatically group aux-output events to overcome --filter syntax.

   - Enable PERF_SAMPLE_DATA_SRC on ARMs SPE.

   - Update ARM's CoreSight hardware tracing OpenCSD library to v1.0.0.

  perf annotate TUI:

   - Fix handling of 'k' ("show line number") hotkey

   - Fix jump parsing for C++ code.

  perf probe:

   - Add protection to avoid endless loop.

  cgroups:

   - Avoid reading cgroup mountpoint multiple times, caching it.

   - Fix handling of cgroup v1/v2 in mixed hierarchy.

  Symbol resolving:

   - Add OCaml symbol demangling.

   - Further fixes for handling PE executables when using perf with Wine
     and .exe/.dll files.

   - Fix 'perf unwind' DSO handling.

   - Resolve symbols against debug file first, to deal with artifacts
     related to LTO.

   - Fix gap between kernel end and module start on powerpc.

  Reporting tools:

   - The DSO filter shouldn't show samples in unresolved maps.

   - Improve debuginfod support in various tools.

  build ids:

   - Fix 16-byte build ids in 'perf buildid-cache', add a 'perf test'
     entry for that case.

  perf test:

   - Support for PERF_SAMPLE_WEIGHT_STRUCT.

   - Add test case for PERF_SAMPLE_CODE_PAGE_SIZE.

   - Shell based tests for 'perf daemon's commands ('start', 'stop,
     'reconfig', 'list', etc).

   - ARM cs-etm 'perf test' fixes.

   - Add parse-metric memory bandwidth testcase.

  Compiler related:

   - Fix 'perf probe' kretprobe issue caused by gcc 11 bug when used
     with -fpatchable-function-entry.

   - Fix ARM64 build with gcc 11's -Wformat-overflow.

   - Fix unaligned access in sample parsing test.

   - Fix printf conversion specifier for IP addresses on arm64, s390 and
     powerpc.

  Arch specific:

   - Support exposing Performance Monitor Counter SPRs as part of
     extended regs on powerpc.

   - Add JSON 'perf stat' metrics for ARM64's imx8mp, imx8mq and imx8mn
     DDR, fix imx8mm ones.

   - Fix common and uarch events for ARM64's A76 and Ampere eMag"

* tag 'perf-tools-for-v5.12-2020-02-19' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (148 commits)
  perf buildid-cache: Don't skip 16-byte build-ids
  perf buildid-cache: Add test for 16-byte build-id
  perf symbol: Remove redundant libbfd checks
  perf test: Output the sub testing result in cs-etm
  perf test: Suppress logs in cs-etm testing
  perf tools: Fix arm64 build error with gcc-11
  perf intel-pt: Add documentation for tracing virtual machines
  perf intel-pt: Split VM-Entry and VM-Exit branches
  perf intel-pt: Adjust sample flags for VM-Exit
  perf intel-pt: Allow for a guest kernel address filter
  perf intel-pt: Support decoding of guest kernel
  perf machine: Factor out machine__idle_thread()
  perf machine: Factor out machines__find_guest()
  perf intel-pt: Amend decoder to track the NR flag
  perf intel-pt: Retain the last PIP packet payload as is
  perf intel_pt: Add vmlaunch and vmresume as branches
  perf script: Add branch types for VM-Entry and VM-Exit
  perf auxtrace: Automatically group aux-output events
  perf test: Fix unaligned access in sample parsing test
  perf tools: Support arch specific PERF_SAMPLE_WEIGHT_STRUCT processing
  ...

Pull more nfsd updates from Chuck Lever:
 "Here are a few additional NFSD commits for the merge window:

 Optimization:
   - Cork the socket while there are queued replies

  Fixes:
   - DRC shutdown ordering
   - svc_rdma_accept() lockdep splat"

* tag 'nfsd-5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
  SUNRPC: Further clean up svc_tcp_sendmsg()
  SUNRPC: Remove redundant socket flags from svc_tcp_sendmsg()
  SUNRPC: Use TCP_CORK to optimise send performance on the server
  svcrdma: Hold private mutex while invoking rdma_accept()
  nfsd: register pernet ops last, unregister first

Pull ceph updates from Ilya Dryomov:
 "With netfs helper library and fscache rework delayed, just a few cap
  handling improvements to avoid grabbing mmap_lock in some code paths
  and deal with capsnaps better and a mount option cleanup"

* tag 'ceph-for-5.12-rc1' of git://github.com/ceph/ceph-client:
  ceph: defer flushing the capsnap if the Fb is used
  libceph: remove osdtimeout option entirely
  libceph: deprecate [no]cephx_require_signatures options
  ceph: allow queueing cap/snap handling after putting cap references
  ceph: clean up inode work queueing
  ceph: fix flush_snap logic after putting caps

Pull isofs, udf, and quota updates from Jan Kara:
 "Several udf, isofs, and quota fixes"

* tag 'fs_for_v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  parser: Fix kernel-doc markups
  udf: handle large user and group ID
  isofs: handle large user and group ID
  parser: add unsigned int parser
  udf: fix silent AED tagLocation corruption
  isofs: release buffer head before return
  quota: Fix memory leak when handling corrupted quota file

Pull fsnotify update from Jan Kara:
 "Make inotify groups be charged against appropriate memcgs"

* tag 'fsnotify_for_v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  inotify, memcg: account inotify instances to kmemcg

Pull lazytime updates from Jan Kara:
 "Cleanups of the lazytime handling in the writeback code making rules
  for calling ->dirty_inode() filesystem handlers saner"

* tag 'lazytime_for_v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  ext4: simplify i_state checks in __ext4_update_other_inode_time()
  gfs2: don't worry about I_DIRTY_TIME in gfs2_fsync()
  fs: improve comments for writeback_single_inode()
  fs: drop redundant check from __writeback_single_inode()
  fs: clean up __mark_inode_dirty() a bit
  fs: pass only I_DIRTY_INODE flags to ->dirty_inode
  fs: don't call ->dirty_inode for lazytime timestamp updates
  fat: only specify I_DIRTY_TIME when needed in fat_update_time()
  fs: only specify I_DIRTY_TIME when needed in generic_update_time()
  fs: correctly document the inode dirty flags

Pull exfat updates from Namjae Jeon:

 - improve file deletion performance with dirsync mount option

 - fix shift-out-of-bounds in exfat_fill_super() reported by syzkaller

* tag 'exfat-for-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat:
  exfat: improve performance of exfat_free_cluster when using dirsync mount option
  exfat: fix shift-out-of-bounds in exfat_fill_super()

Pull zonefs updates from Damien Le Moal:
 "Two changes:

   - A fix that did not make it in time for 5.11, to correct the file
     size initialization of full sequential zone, from Shin'ichiro

   - Add file operation tracepoints to help with debugging, from
     Johannes"

* tag 'zonefs-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs:
  zonefs: Fix file size of zones in full condition
  zonefs: add tracepoints for file operations

Pull RCU-safe common_lsm_audit() from Al Viro:
 "Make common_lsm_audit() non-blocking and usable from RCU pathwalk
  context.

  We don't really need to grab/drop dentry in there - rcu_read_lock() is
  enough. There's a couple of followups using that to simplify the
  logics in selinux, but those hadn't soaked in -next yet, so they'll
  have to go in next window"

* 'work.audit' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  make dump_common_audit_data() safe to be called from RCU pathwalk
  new helper: d_find_alias_rcu()

Pull d_name whack-a-mole from Al Viro:
 "A bunch of places that play with ->d_name in printks instead of using
  proper formats..."

* 'work.d_name' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  orangefs_file_mmap(): use %pD
  cifs_debug: use %pd instead of messing with ->d_name
  erofs: use %pd instead of messing with ->d_name
  cramfs: use %pD instead of messing with file_dentry()->d_name

Pull memblock update from Mike Rapoport:
 "Remove return value of memblock_free_all()

  memblock_free_all() returns the total count of freed pages and its
  callers used this value to update totalram_pages. This update is now
  anyway a part of memblock_free_all() and its callers no longer check
  the return value, so make memblock_free_all() void"

* tag 'memblock-v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
  mm: memblock: remove return value of memblock_free_all()

Pull kgdb updates from Daniel Thompson:
 "Another fairly small set of changes of changes this cycle. The most
  significant functional change is a fix to better manage the flags when
  allocating memory.

  Additionally there is the removal of some unused code (which is
  slightly more dramatic than it sounds given it means there are now no
  tasklets in kgdb) together with a tidy up of the debug prints and some
  spelling corrections for the documentation"

* tag 'kgdb-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux:
  kgdb: Remove kgdb_schedule_breakpoint()
  kdb: Make memory allocations more robust
  kdb: kdb_support: Fix debugging information problem
  kernel: debug: fix typo issue
  kgdb: rectify kernel-doc for kgdb_unregister_io_module()

Merge tag 'livepatching-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching

Pull livepatching updates from Petr Mladek:

 - Practical information how to implement reliable stacktraces needed by
   the livepatching consistency model by Mark Rutland and Mark Brown.

 - Automatically generated documentation contents by Mark Brown.

* tag 'livepatching-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching:
  Documentation: livepatch: document reliable stacktrace
  Documentation: livepatch: Convert to automatically generated contents

Pull printk updates from Petr Mladek:

 - New "no_hash_pointers" kernel parameter causes that %p shows raw
   pointer values instead of hashed ones. It is intended only for
   debugging purposes. Misuse is prevented by a fat warning message that
   is inspired by trace_printk().

 - Prevent a possible deadlock when flushing printk_safe buffers during
   panic().

 - Fix performance regression caused by the lockless printk ringbuffer.
   It was visible with huge log buffer and long messages.

 - Documentation fix-up.

* tag 'printk-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
  lib/vsprintf: no_hash_pointers prints all addresses as unhashed
  kselftest: add support for skipped tests
  lib: use KSTM_MODULE_GLOBALS macro in kselftest drivers
  printk: avoid prb_first_valid_seq() where possible
  printk: fix deadlock when kernel panic
  printk: rectify kernel-doc for prb_rec_init_wr()

Merge tag 'linux-kselftest-kunit-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull KUnit updates from Shuah Khan

 - support for filtering test suites using glob from Daniel Latypov.

     "kunit_filter.glob" command line option is passed to the UML
     kernel, which currently only supports filtering by suite name.
     This support allows running different subsets of tests, e.g.

      $ ./tools/testing/kunit/kunit.py build
      $ ./tools/testing/kunit/kunit.py exec 'list*'
      $ ./tools/testing/kunit/kunit.py exec 'kunit*'

 - several fixes and cleanups also from Daniel Latypov.

* tag 'linux-kselftest-kunit-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  kunit: tool: fix unintentional statefulness in run_kernel()
  kunit: tool: add support for filtering suites by glob
  kunit: add kunit.filter_glob cmdline option to filter suites
  kunit: don't show `1 == 1` in failed assertion messages
  kunit: make kunit_tool accept optional path to .kunitconfig fragment
  Documentation: kunit: add tips.rst for small examples
  KUnit: Docs: make start.rst example Kconfig follow style.rst
  kunit: tool: simplify kconfig is_subset_of() logic
  minor: kunit: tool: fix unit test so it can run from non-root dir
  kunit: tool: use `with open()` in unit test
  kunit: tool: stop using bare asserts in unit test
  kunit: tool: fix unit test cleanup handling

Merge tag 'linux-kselftest-next-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull Kselftest updates from Shuah Khan:

 - dmabuf-heaps test fixes and cleanups from John Stultz

 - seccomp test fix to accept any valid fd in user_notification_addfd

 - Minor fixes to breakpoints and vDSO tests

 - Minor code cleanups to ipc and x86 tests

* tag 'linux-kselftest-next-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests/seccomp: Accept any valid fd in user_notification_addfd
  selftests/timens: add futex binary to .gitignore
  selftests: breakpoints: Use correct error messages in breakpoint_test_arm64.c
  selftests/vDSO: fix ABI selftest on riscv
  selftests/x86/ldt_gdt: remove unneeded semicolon
  selftests/ipc: remove unneeded semicolon
  kselftests: dmabuf-heaps: Add extra checking that allocated buffers are zeroed
  kselftests: dmabuf-heaps: Cleanup test output
  kselftests: dmabuf-heaps: Softly fail if don't find a vgem device
  kselftests: dmabuf-heaps: Add clearer checks on DMABUF_BEGIN/END_SYNC
  kselftests: dmabuf-heaps: Fix Makefile's inclusion of the kernel's usr/include dir

Pull documentation updates from Jonathan Corbet:
 "It has been a relatively quiet cycle in docsland.

   - As promised, the minimum Sphinx version to build the docs is now
     1.7, and we have dropped support for Python 2 entirely. That
     allowed the removal of a bunch of compatibility code.

   - A set of treewide warning fixups from Mauro that I applied after it
     became clear nobody else was going to deal with them.

   - The automarkup mechanism can now create cross-references from
     relative paths to RST files.

   - More translations, typo fixes, and warning fixes"

* tag 'docs-5.12' of git://git.lwn.net/linux: (75 commits)
  docs: kernel-hacking: be more civil
  docs: Remove the Microsoft rhetoric
  Documentation/admin-guide: kernel-parameters: Update nohlt section
  doc/admin-guide: fix spelling mistake: "perfomance" -> "performance"
  docs: Document cross-referencing using relative path
  docs: Enable usage of relative paths to docs on automarkup
  docs: thermal: fix spelling mistakes
  Documentation: admin-guide: Update kvm/xen config option
  docs: Make syscalls' helpers naming consistent
  coding-style.rst: Avoid comma statements
  Documentation: /proc/loadavg: add 3 more field descriptions
  Documentation/submitting-patches: Add blurb about backtraces in commit messages
  Docs: drop Python 2 support
  Move our minimum Sphinx version to 1.7
  Documentation: input: define ABS_PRESSURE/ABS_MT_PRESSURE resolution as grams
  scripts/kernel-doc: add internal hyperlink to DOC: sections
  Update Documentation/admin-guide/sysctl/fs.rst
  docs: Update DTB format references
  docs: zh_CN: add iio index.rst translation
  docs/zh_CN: add iio ep93xx_adc.rst translation
  ...

Pull block IPI updates from Jens Axboe:
 "Avoid IRQ locking for the block IPI handling (Sebastian Andrzej
  Siewior)"

* tag 'for-5.12/block-ipi-2021-02-21' of git://git.kernel.dk/linux-block:
  blk-mq: Use llist_head for blk_cpu_done
  blk-mq: Always complete remote completions requests in softirq
  smp: Process pending softirqs in flush_smp_call_function_from_idle()

Pull iommu updates from Joerg Roedel:

 - ARM SMMU and Mediatek updates from Will Deacon:
     - Support for MT8192 IOMMU from Mediatek
     - Arm v7s io-pgtable extensions for MT8192
     - Removal of TLBI_ON_MAP quirk
     - New Qualcomm compatible strings
     - Allow SVA without hardware broadcast TLB maintenance on SMMUv3
     - Virtualization Host Extension support for SMMUv3 (SVA)
     - Allow SMMUv3 PMU perf driver to be built independently from IOMMU

 - Some tidy-up in IOVA and core code

 - Conversion of the AMD IOMMU code to use the generic IO-page-table
   framework

 - Intel VT-d updates from Lu Baolu:
     - Audit capability consistency among different IOMMUs
     - Add SATC reporting structure support
     - Add iotlb_sync_map callback support

 - SDHI support for Renesas IOMMU driver

 - Misc cleanups and other small improvments

* tag 'iommu-updates-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (94 commits)
  iommu/amd: Fix performance counter initialization
  MAINTAINERS: repair file pattern in MEDIATEK IOMMU DRIVER
  iommu/mediatek: Fix error code in probe()
  iommu/mediatek: Fix unsigned domid comparison with less than zero
  iommu/vt-d: Parse SATC reporting structure
  iommu/vt-d: Add new enum value and structure for SATC
  iommu/vt-d: Add iotlb_sync_map callback
  iommu/vt-d: Move capability check code to cap_audit files
  iommu/vt-d: Audit IOMMU Capabilities and add helper functions
  iommu/vt-d: Fix 'physical' typos
  iommu: Properly pass gfp_t in _iommu_map() to avoid atomic sleeping
  iommu/vt-d: Fix compile error [-Werror=implicit-function-declaration]
  driver/perf: Remove ARM_SMMU_V3_PMU dependency on ARM_SMMU_V3
  MAINTAINERS: Add entry for MediaTek IOMMU
  iommu/mediatek: Add mt8192 support
  iommu/mediatek: Remove unnecessary check in attach_device
  iommu/mediatek: Support master use iova over 32bit
  iommu/mediatek: Add iova reserved function
  iommu/mediatek: Support for multi domains
  iommu/mediatek: Add get_domain_id from dev->dma_range_map
  ...

Pull rdma updates from Jason Gunthorpe:
 "This is quite a small cycle, if not for Lee's 70 patches cleaning the
  kdocs it would be well below typical for patch count.

  Most of the interesting work here was in the HNS and rxe drivers which
  got fairly major internal changes.

  Summary:

   - Driver updates and bug fixes: siw, hns, bnxt_re, mlx5, efa

   - Significant rework in rxe to get it ready to have XRC support added

   - Several rts bug fixes

   - Big series to get to 'make W=1' cleanness, primarily updating kdocs

   - Support for creating a RDMA MR from a DMABUF fd to allow PCI peer
     to peer transfers to GPU VRAM

   - Device disassociation now works properly with umad

   - Work to support more than 255 ports on a RDMA device

   - Further support for the new HNS HIP09 hardware

   - Coding style cleanups: comma to semicolon, unneded semicolon/blank
     lines, remove 'h' printk format, don't check for NULL before kfree,
     use true/false for bool"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (205 commits)
  RDMA/rtrs-srv: Do not pass a valid pointer to PTR_ERR()
  RDMA/srp: Fix support for unpopulated and unbalanced NUMA nodes
  RDMA/mlx5: Fail QP creation if the device can not support the CQE TS
  RDMA/mlx5: Allow CQ creation without attached EQs
  RDMA/rtrs-srv-sysfs: fix missing put_device
  RDMA/rtrs-srv: fix memory leak by missing kobject free
  RDMA/rtrs: Only allow addition of path to an already established session
  RDMA/rtrs-srv: Fix stack-out-of-bounds
  RDMA/rxe: Remove unused pkt->offset
  RDMA/ucma: Fix use-after-free bug in ucma_create_uevent
  RDMA/core: Fix kernel doc warnings for ib_port_immutable_read()
  RDMA/qedr: Use true and false for bool variable
  RDMA/hns: Adjust definition of FRMR fields
  RDMA/hns: Refactor process of posting CMDQ
  RDMA/hns: Adjust fields and variables about CMDQ tail/head
  RDMA/hns: Remove redundant operations on CMDQ
  RDMA/hns: Fixes missing error code of CMDQ
  RDMA/hns: Remove unused member and variable of CMDQ
  RDMA/ipoib: Remove racy Subnet Manager sendonly join checks
  RDMA/mlx5: Support 400Gbps IB rate in mlx5 driver
  ...

Pull SCSI updates from James Bottomley:
 "This series consists of the usual driver updates (ufs, ibmvfc,
  qla2xxx, hisi_sas, pm80xx) plus the removal of the gdth driver (which
  is bound to cause conflicts with a trivial change somewhere).

  The only big major rework of note is the one from Hannes trying to
  clean up our result handling code in the drivers to make it
  consistent"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (194 commits)
  scsi: MAINTAINERS: Adjust to reflect gdth scsi driver removal
  scsi: ufs: Give clk scaling min gear a value
  scsi: lpfc: Fix 'physical' typos
  scsi: megaraid_mbox: Fix spelling of 'allocated'
  scsi: qla2xxx: Simplify the calculation of variables
  scsi: message: fusion: Fix 'physical' typos
  scsi: target: core: Change ASCQ for residual write
  scsi: target: core: Signal WRITE residuals
  scsi: target: core: Set residuals for 4Kn devices
  scsi: hisi_sas: Add trace FIFO debugfs support
  scsi: hisi_sas: Flush workqueue in hisi_sas_v3_remove()
  scsi: hisi_sas: Enable debugfs support by default
  scsi: hisi_sas: Don't check .nr_hw_queues in hisi_sas_task_prep()
  scsi: hisi_sas: Remove deferred probe check in hisi_sas_v2_probe()
  scsi: lpfc: Add auto select on IRQ_POLL
  scsi: ncr53c8xx: Fix typos
  scsi: lpfc: Fix ancient double free
  scsi: qla2xxx: Fix some memory corruption
  scsi: qla2xxx: Remove redundant NULL check
  scsi: megaraid: Fix ifnullfree.cocci warnings
  ...

Merge tag 'for-5.12/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device mapper updates from Mike Snitzer:

 - Fix DM integrity's HMAC support to provide enhanced security of
   internal_hash and journal_mac capabilities.

 - Various DM writecache fixes to address performance, fix table output
   to match what was provided at table creation, fix writing beyond end
   of device when shrinking underlying data device, and a couple other
   small cleanups.

 - Add DM crypt support for using trusted keys.

 - Fix deadlock when swapping to DM crypt device by throttling number of
   in-flight REQ_SWAP bios. Implemented in DM core so that other
   bio-based targets can opt-in by setting ti->limit_swap_bios.

 - Fix various inverted logic bugs in the .iterate_devices callout
   functions that are used to assess if specific feature or capability
   is supported across all devices being combined/stacked by DM.

 - Fix DM era target bugs that exposed users to lost writes or memory
   leaks.

 - Add DM core support for passing through inline crypto support of
   underlying devices. Includes block/keyslot-manager changes that
   enable extending this support to DM.

 - Various small fixes and cleanups (spelling fixes, front padding
   calculation cleanup, cleanup conditional zoned support in targets,
   etc).

* tag 'for-5.12/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (31 commits)
  dm: fix deadlock when swapping to encrypted device
  dm: simplify target code conditional on CONFIG_BLK_DEV_ZONED
  dm: set DM_TARGET_PASSES_CRYPTO feature for some targets
  dm: support key eviction from keyslot managers of underlying devices
  dm: add support for passing through inline crypto support
  block/keyslot-manager: Introduce functions for device mapper support
  block/keyslot-manager: Introduce passthrough keyslot manager
  dm era: only resize metadata in preresume
  dm era: Use correct value size in equality function of writeset tree
  dm era: Fix bitset memory leaks
  dm era: Verify the data block size hasn't changed
  dm era: Reinitialize bitset cache before digesting a new writeset
  dm era: Update in-core bitset after committing the metadata
  dm era: Recover committed writeset after crash
  dm writecache: use bdev_nr_sectors() instead of open-coded equivalent
  dm writecache: fix writing beyond end of underlying device when shrinking
  dm table: remove needless request_queue NULL pointer checks
  dm table: fix zoned iterate_devices based device capability checks
  dm table: fix DAX iterate_devices based device capability checks
  dm table: fix iterate_devices based device capability checks
  ...

Pull devicetree updates from Rob Herring:

 - Sync dtc to upstream version v1.6.0-51-g183df9e9c2b9 and build host
   fdtoverlay

 - Add kbuild support to build DT overlays (%.dtbo)

 - Drop NULLifying match table in of_match_device().

   In preparation for this, there are several driver cleanups to use
   (of_)?device_get_match_data().

 - Drop pointless wrappers from DT struct device API

 - Convert USB binding schemas to use graph schema and remove old plain
   text graph binding doc

 - Convert spi-nor and v3d GPU bindings to DT schema

 - Tree wide schema fixes for if/then schemas, array size constraints,
   and undocumented compatible strings in examples

 - Handle 'no-map' correctly for already reserved memblock regions

* tag 'devicetree-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (35 commits)
  driver core: platform: Drop of_device_node_put() wrapper
  of: Remove of_dev_{get,put}()
  dt-bindings: usb: Change descibe to describe in usbmisc-imx.txt
  dt-bindings: can: rcar_canfd: Group tuples in pin control properties
  dt-bindings: power: renesas,apmu: Group tuples in cpus properties
  dt-bindings: mtd: spi-nor: Convert to DT schema format
  dt-bindings: Use portable sort for version cmp
  dt-bindings: ethernet-controller: fix fixed-link specification
  dt-bindings: irqchip: Add node name to PRUSS INTC
  dt-bindings: interconnect: Fix the expected number of cells
  dt-bindings: Fix errors in 'if' schemas
  dt-bindings: iommu: renesas,ipmmu-vmsa: Make 'power-domains' conditionally required
  dt-bindings: Fix undocumented compatible strings in examples
  kbuild: Add support to build overlays (%.dtbo)
  scripts: dtc: Remove the unused fdtdump.c file
  scripts: dtc: Build fdtoverlay tool
  scripts/dtc: Update to upstream version v1.6.0-51-g183df9e9c2b9
  scripts: dtc: Fetch fdtoverlay.c from external DTC project
  dt-bindings: thermal: sun8i: Fix misplaced schema keyword in compatible strings
  dt-bindings: iio: dac: Fix AD5686 references
  ...

Pull gpio updates from Bartosz Golaszewski:
 "It's been a relatively calm release cycle and we're actually removing
  more code than we're adding.

  Summary:

   - new driver for the Toshiba Visconti platform

   - rework of interrupt handling in gpio-tegra

   - updates for GPIO selftests: we're now using the character device to
     perform the subsystem checks

   - support for a new rcar variant + some code refactoring

   - refactoring of gpio-ep93xx

   - SPDX License identifier has been updated in the uapi header so that
     userspace programs bundling it can become fully REUSE-compliant

   - improvements to pwm handling in gpio-mvebu

   - support for interrupt handling and power management for gpio-xilinx
     as well as some code refactoring

   - support for a new chip variant in gpio-pca953x

   - removal of drivers: zte xs & intel-mid and removal of leftovers
     from intel-msic

   - impovements to intel drivers pulled from Andy Shevchenko

   - improvements to the gpio-aggregator virtual GPIO driver

   - and several minor tweaks and fixes to code and documentation all
     over the place"

* tag 'gpio-updates-for-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (71 commits)
  gpio: pcf857x: Fix missing first interrupt
  gpio: ep93xx: refactor base IRQ number
  gpio: ep93xx: refactor ep93xx_gpio_add_bank
  gpio: ep93xx: Fix typo s/hierarchial/hierarchical
  gpio: ep93xx: drop to_irq binding
  gpio: ep93xx: Fix wrong irq numbers in port F
  gpio: uapi: use the preferred SPDX license identifier
  gpio: gpio-xilinx: Add check if width exceeds 32
  gpio: gpio-xilinx: Add support for suspend and resume
  gpio: gpio-xilinx: Add interrupt support
  gpio: gpio-xilinx: Reduce spinlock array to array
  gpio: gpio-xilinx: Simplify with dev_err_probe()
  gpio: msic: Drop driver from Makefile
  gpio: wcove: Split out to_ireg() helper and deduplicate the code
  gpio: wcove: Switch to use regmap_set_bits(), regmap_clear_bits()
  gpio: wcove: Get rid of error prone casting in IRQ handler
  gpio: intel-mid: Remove driver for deprecated platform
  gpio: msic: Remove driver for deprecated platform
  gpio: aggregator: Remove trailing comma in terminator entries
  gpio: aggregator: Use compound literal from the header
  ...

Pull RTC updates from Alexandre Belloni:
 "Many cleanups and a few drivers removal this cycle.

  Subsystem:
   - Introduce features bitfield and the first feature: RTC_FEATURE_ALARM

  Removed drivers:
   - ab3100
   - coh901331
   - tx4939
   - sirfsoc

  Drivers:
   - use rtc_lock and rtc_unlock instead of opencoding
   - constify all struct rtc_class_ops
   - quiet maybe-unused variable warning
   - replace spin_lock_irqsave with spin_lock in hard IRQ
   - pcf2127: disable Power-On Reset Override and run OTP refresh"

* tag 'rtc-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (81 commits)
  rtc: abx80x: Add utility function for writing configuration key
  rtc: pcf2127: properly set flag WD_CD for rtc chips(pcf2129, pca2129)
  rtc: pcf8563: Add NXP PCA8565 compatible
  rtc: s3c: quiet maybe-unused variable warning
  rtc: s3c: stop setting bogus time
  rtc: sd3078: quiet maybe-unused variable warning
  rtc: s35390a: quiet maybe-unused variable warning
  rtc: rx8581: quiet maybe-unused variable warning
  rtc: rx8010: quiet maybe-unused variable warning
  rtc: rv8803: quiet maybe-unused variable warning
  rtc: rv3032: quiet maybe-unused variable warning
  rtc: rv3029: quiet maybe-unused variable warning
  rtc: rv3028: quiet maybe-unused variable warning
  rtc: rs5c372: quiet maybe-unused variable warning
  rtc: pcf85363: quiet maybe-unused variable warning
  rtc: pcf85063: quiet maybe-unused variable warnings
  rtc: meson: quiet maybe-unused variable warning
  rtc: m41t80: quiet maybe-unused variable warning
  rtc: isl1208: quiet maybe-unused variable warning
  rtc: ds3232: quiet maybe-unused variable warning
  ...

Pull i3c update from Alexandre Belloni:
 "Subsystem:
   - Handle drivers without probe or remove callback
   - Remove callback now returns void
   - DT documentation is now in yaml

  New driver:
   - Silvaco I3C master"

* tag 'i3c/for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
  i3c: master: dw: Drop redundant disec call
  MAINTAINERS: Add Silvaco I3C master
  i3c: master: svc: Add Silvaco I3C master driver
  dt-bindings: i3c: Describe Silvaco master binding
  dt-bindings: Add vendor prefix for Silvaco
  dt-bindings: i3c: mipi-hci: Include the bus binding
  dt-bindings: i3c: Convert the bus description to yaml
  i3c: Make remove callback return void
  i3c: Handle drivers without probe or remove callback
  i3c/master/mipi-i3c-hci: Specify HAS_IOMEM dependency

Pull HSI update from Sebastian Reichel:

 - runtime PM usage counter fix

* tag 'hsi-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi:
  HSI: Fix PM usage counter unbalance in ssi_hw_init

Pull power supply and reset updates from Sebastian Reichel:
 "Battery/charger driver changes:
   - acer_a500: new fuel gauge driver for Acer Iconia Tab A500
   - bq256xx: new charger driver
   - bq27xxx: Support CHARGE_NOW for bq27z561/bq28z610/bq34z100
   - bq27xxx: Fix inverted CURRENT_NOW sign
   - cpcap: rework fuel gauge and charger drivers
   - ltc4162l: new charger driver
   - max8997-charger: add extcon based current limit configuration
   - max8903, wm97xx, z2: convert to GPIO descriptors (incl. ARM board files)
   - misc cleanup and fixes

  Reset drivers:
   - new poweroff driver for ATC260x
   - at91-sama5d2_shdwc: add support for sama7g5
   - drop zte zx driver (SoC support is removed from kernel)"

* tag 'for-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (55 commits)
  power-supply: use kobj_to_dev()
  power: supply: charger-manager: fix typo
  power/reset: remove zte zx driver
  power: supply: bq25980: Fix repetive bq25975 with bq25960
  power: supply: smb347-charger: Fix interrupt usage if interrupt is unavailable
  power: supply: axp20x_usb_power: Init work before enabling IRQs
  power: supply: fix sbs-charger build, needs REGMAP_I2C
  power: supply: bq27xxx: fix polarity of current_now
  power: supply: charger-manager: fix incorrect health status
  power: reset: at91-sama5d2_shdwc: add support for sama7g5
  dt-bindings: atmel-sysreg: add microchip,sama7g5-shdwc
  power: reset: at91-sama5d2_shdwc: fix wkupdbc mask
  dt-bindings: power/supply: Add ltc4162-l-charger
  power: supply: bq24190_charger: convert comma to semicolon
  power: supply: ab8500_fg: convert comma to semicolon
  power: supply: ds2780: Switch to using the new API kobj_to_dev()
  power: supply: bq27xxx: Support CHARGE_NOW for bq27z561/bq28z610/bq34z100
  power: supply: cpcap-charger: Fix power_supply_put on null battery pointer
  power: supply: cpcap-battery: constify psy_desc
  power: supply: cpcap-battery: Fix typo
  ...

Pull clk updates from Stephen Boyd:
 "This is all driver updates, the majority of which is a bunch of new
  Qualcomm clk drivers that dominate the diffstat because we add support
  for six SoCs from that particular vendor.

  The other big change is the removal of various clk drivers that are no
  longer used now that the kernel is dropping support for those SoCs.

  Beyond that there's the usual non-critical fixes for existing drivers
  and a good number of patches from Lee Jones that cleanup a bunch of
  W=1 enabled builds.

  Removed Drivers:
   - Remove efm32 clk driver
   - Remove tango4 clk driver
   - Remove zte zx clk driver
   - Remove sirf prima2/atlast clk drivers
   - Remove u300 clk driver

  New Drivers:
   - PLL support on MStar/SigmaStar ARMv7 SoCs
   - CPU clks for Qualcomm SDX55
   - GCC and RPMh clks for Qualcomm SC8180x and SC7280 SoCs
   - GCC clks for Qualcomm SM8350
   - GPU clks for Qualcomm SDM660/SDM630

  Updates:
   - Video clk fixups on Qualcomm SM8250
   - Improvements for multimedia clks on Qualcomm MSM8998
   - Fix many warnings with W=1 enabled builds under drivers/clk/
   - Support crystal load capacitance for Versaclock VC5
   - Add a "skip recall" DT binding for Silicon Labs' si570 to avoid
     glitches at boot
   - Convert Xilinx VCU clk driver to a proper clk provider driver
   - Expose Xilinx ZynqMP clk driver to more platforms
   - Amlogic pll driver fixup
   - Amlogic meson8b clock controller dt support clean up
   - Remove mipi clk from the Amlogic axg clock controller
   - New Rockchip rk3368 clock ids related to camera input
   - Use pr_notice() instead of pr_warn() on i.MX6Q pre-boot ldb_di_clk
     reparenting
   - A series from Liu Ying that adds some SCU clocks support for
     i.MX8qxp DC0/MIPI-LVDS subsystems
   - A series from Lucas Stach that adds PLL monitor clocks for i.MX8MQ,
     and clkout1/2 support for i.MX8MM/MN
   - Add I2c and Ethernet (RAVB) clocks on Renesas R-Car V3U
   - Add timer (TMU) clocks on most Renesas R-Car Gen3 SoCs
   - Add video-related (FCPVD/VSPD/VSPX), watchdog (RWDT), serial
     (HSCIF), pincontrol/GPIO (PFC/GPIO), SPI (MSIOF), SDHI, and DMA
     (SYS-DMAC) clocks on Renesas R-Car V3U
   - Add support for the USB 2.0 clock selector on Renesas RZ/G2 SoCs
   - Allwinner H616 SoC clk support"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (171 commits)
  clk: mstar: msc313-mpll: Fix format specifier
  clk: mstar: Allow MStar clk drivers to be compile tested
  clk: qoriq: use macros to generate pll_mask
  clk: qcom: Add Global Clock controller (GCC) driver for SC7280
  dt-bindings: clock: Add SC7280 GCC clock binding
  clk: qcom: rpmh: Add support for RPMH clocks on SC7280
  dt-bindings: clock: Add RPMHCC bindings for SC7280
  clk: qcom: gcc-sm8350: add gdsc
  dt-bindings: clock: Add QCOM SDM630 and SDM660 graphics clock bindings
  clk: qcom: Add SDM660 GPU Clock Controller (GPUCC) driver
  clk: qcom: mmcc-msm8996: Migrate gfx3d clock to clk_rcg2_gfx3d
  clk: qcom: rcg2: Stop hardcoding gfx3d pingpong parent numbers
  dt-bindings: clock: Add support for the SDM630 and SDM660 mmcc
  clk: qcom: Add SDM660 Multimedia Clock Controller (MMCC) driver
  clk: qcom: gcc-sdm660: Mark GPU CFG AHB clock as critical
  clk: qcom: gcc-sdm660: Mark MMSS NoC CFG AHB clock as critical
  clk: qcom: gpucc-msm8998: Allow fabia gpupll0 rate setting
  clk: qcom: gpucc-msm8998: Add resets, cxc, fix flags on gpu_gx_gdsc
  clk: qcom: gdsc: Implement NO_RET_PERIPH flag
  clk: mstar: MStar/SigmaStar MPLL driver
  ...

Pull thermal updates from Daniel Lezcano:

 - Use the newly introduced 'hot' and 'critical' ops for the acpi
   thermal driver (Daniel Lezcano)

 - Remove the notify ops as it is no longer used (Daniel Lezcano)

 - Remove the 'forced passive' option and the unused bind/unbind
   functions (Daniel Lezcano)

 - Remove the THERMAL_TRIPS_NONE and the code cleanup around this macro
   (Daniel Lezcano)

 - Rework the delays to make them pre-computed instead of computing them
   again and again at each polling interval (Daniel Lezcano)

 - Remove the pointless 'thermal_zone_device_reset' function (Daniel
   Lezcano)

 - Use the critical and hot ops to prevent an unexpected system shutdown
   on int340x (Kai-Heng Feng)

 - Make the cooling device state private to the thermal subsystem
   (Daniel Lezcano)

 - Prevent to use not-power-aware actor devices with the power allocator
   governor (Lukasz Luba)

 - Remove 'zx' and 'tango' support along with the corresponding
   platforms (Arnd Bergman)

 - Fix several issues on the Omap thermal driver (Tony Lindgren)

 - Add support for adc-tm5 PMIC thermal monitor for Qcom platforms
   (Dmitry Baryshkov)

 - Fix an initialization loop in the adc-tm5 (Colin Ian King)

 - Fix a return error check in the cpufreq cooling device (Viresh Kumar)

* tag 'thermal-v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (26 commits)
  thermal: cpufreq_cooling: freq_qos_update_request() returns < 0 on error
  thermal: qcom: Fix comparison with uninitialized variable channels_available
  thermal: qcom: add support for adc-tm5 PMIC thermal monitor
  dt-bindings: thermal: qcom: add adc-thermal monitor bindings
  thermal: ti-soc-thermal: Use non-inverted define for omap4
  thermal: ti-soc-thermal: Simplify polling with iopoll
  thermal: ti-soc-thermal: Fix stuck sensor with continuous mode for 4430
  thermal: ti-soc-thermal: Skip pointless register access for dra7
  thermal/drivers/zx: Remove zx driver
  thermal/drivers/tango: Remove tango driver
  thermal: power allocator: fail binding for non-power actor devices
  thermal/core: Make cooling device state change private
  thermal: intel: pch: Fix unexpected shutdown at critical temperature
  thermal: int340x: Fix unexpected shutdown at critical temperature
  thermal/core: Remove pointless thermal_zone_device_reset() function
  thermal/core: Remove ms based delay fields
  thermal/core: Use precomputed jiffies for the polling
  thermal/core: Precompute the delays from msecs to jiffies
  thermal/core: Remove unused macro THERMAL_TRIPS_NONE
  thermal/core: Remove THERMAL_TRIPS_NONE test
  ...

Merge tag 'tag-chrome-platform-for-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux

Pull chrome platform updates from Benson Leung:
 "Lots of changes to the cros_ec_typec driver for 5.12.

  A portion of this this set of cros_ec_typec driver's changes was
  merged through GregKH's USB tree in order to satisfy cros_ec_typec
  driver and typec connector class subsystem dependencies of subsequent
  changes.

  Summary:

  cros_ec_typec:
   - Registration of cable plug information
   - Support for SOP' plug registration and altmodes
   - Support for reporting number of altmodes supported by partners and
     plugs
   - Send mux configuration ack to EC via a new host command
   - Support mux control with no port partner present
   - Decouple cable removal from partner removal

  cros_ec misc:
   - Fix some event masking in cros_ec_proto.
   - Gwendal reworked cros_ec's top and bottom half for consistency in
     ishtp and rpmsg
   - Constify static attribute_group structs"

* tag 'tag-chrome-platform-for-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
  platform/chrome: cros_ec_typec: Flush pending work
  platform/chrome: cros_ec_types: Support disconnect events without partners
  platform/chrome: cros_ec_typec: Skip port partner check in configure_mux()
  platform/chrome: cros_ec_typec: Decouple partner removal
  platform/chrome: cros_ec: Call interrupt bottom half at probe time
  platform/chrome: cros_ec: Call interrupt bottom half in ISH or RPMSG mode
  platform/chrome: cros_ec_sysfs: Add cold-ap-off to sysfs reboot.
  platform/chrome: cros_ec_commands: Add host command to keep AP off after EC reset.
  platform/chrome: Constify static attribute_group structs
  platform/chrome: cros_ec_proto: Add LID and BATTERY to default mask
  platform/chrome: cros_ec_proto: Use EC_HOST_EVENT_MASK not BIT

Pull MFD updates from Lee Jones:
 "Core Frameworks:
   - Standardise MFD_CELL_* helpers

  New Drivers:
   - Add support for Acer Iconia Tab A500 Embedded Controller

  New Device Support:
   - Add support for ROHM BD9574MWF to BD9571MWV
   - Add support for Intel Alder Lake PCH-P PCI to LPSS
   - Add support for Intel Alder Lake PCH-S PCI to LPSS

  New Functionality:
   - Support ACPI enumeration; arizona

  Fix-ups:
   - Managed resources; bd9571mwv
   - DT additions/fix-ups; bd9571mwv, iqs62x, max8997, gateworks-gsc, ene-kb930
   - Convert to SPDX; bd9571mw
   - Fix return values/error handling; sunxi
   - Provide SOFTDEP; arizona
   - Make use of DIV_ROUND_UP; mcp-sa11x0
   - Use generic APIs; arizona
   - Add MAC address sysfs entries; intel-m10-bmc
   - Trivial: Coding-style fix-ups; iqs62x
   - Trivial: Remove superflouous code; iqs62x
   - Clear-up naming conventions; iqs62x

  Bug Fixes:
   - Fix 'pointer from integer' error; altera-sysmgr
   - Convert SGI_MFD_IOC3 from tristate to bool; Kconfig
   - Fix interrupt handling; gateworks-gsc
   - Extend required delay; iqs62x
   - Do not use I2C polling during calibration; iqs62x
   - Do no adjust clock frequency during calibration; iqs62x
   - Fix use-after-free; wm831x-auxad"

* tag 'mfd-next-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (32 commits)
  mfd: wm831x-auxadc: Prevent use after free in wm831x_auxadc_read_irq()
  mfd: iqs62x: Do not change clock frequency during ATI
  mfd: iqs62x: Do not poll during ATI
  mfd: iqs62x: Increase interrupt handler return delay
  mfd: iqs62x: Rename regmap_config struct
  mfd: iqs62x: Remove unused bit mask
  mfd: iqs62x: Remove superfluous whitespace above fallthroughs
  mfd: intel-lpss: Add Intel Alder Lake PCH-S PCI IDs
  mfd: intel-m10-bmc: Expose MAC address and count
  mfd: Add driver for Embedded Controller found on Acer Iconia Tab A500
  dt-bindings: mfd: Add ENE KB930 Embedded Controller binding
  dt-bindings: mfd: gateworks-gsc: Add fan-tach mode
  mfd: intel-lpss: Add Intel Alder Lake PCH-P PCI IDs
  mfd: gateworks-gsc: Fix interrupt type
  mfd: Standardise MFD_CELL_* helper names
  mfd: mcp-sa11x0: Use DIV_ROUND_UP to calculate rw_timeout
  mfd: max8997: Add of_compatible to Extcon and Charger mfd_cell
  dt-bindings: mfd: Correct the node name of the panel LED
  mfd: sgi-ioc3: Turn Kconfig option into a bool
  mfd: altera-sysmgr: Fix physical address storing more
  ...

Pull backlight updates from Lee Jones:
 "New Functionality:
   - Convert to GPIO descriptors

  Fix-ups:
   - Trivial: fix coding style in sky81452-backlight
   - Ensure backlight state is known on bring-up in ktd253
   - Use common platform API in qcom-wled and fbdev"

* tag 'backlight-next-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
  backlight/video: Use Platform getter/setter functions
  backlight: ktd253: Bring up in a known state
  backlight: sky81452-backlight: Convert comma to semicolon
  backlight: lms283gf05: Convert to GPIO descriptors

Pull auxdisplay updates from Miguel Ojeda:
 "A set of auxdisplay fixes and improvements from Geert Uytterhoeven,
  and one from Robin van der Gracht that got lost a long time ago"

* tag 'auxdisplay-for-linus-v5.12' of git://github.com/ojeda/linux:
  auxdisplay: Fix duplicate CHARLCD config symbol
  auxdisplay: ht16k33: Fix refresh rate handling
  dt-bindings: auxdisplay: ht16k33: Convert to json-schema
  dt-bindings: auxdisplay: ht16k33: Fix default-brightness-level range
  dt-bindings: auxdisplay: ht16k33: Keyscan function should be optional

Pull spi updates from Mark Brown:
 "The main focus of this release from a framework point of view has been
  spi-mem where we've acquired support for a few new hardware features
  which enable better performance on suitable hardware.

  Otherwise mostly thanks to Arnd's cleanup efforts on old platforms
  we've removed several obsolete drivers which just about balance out
  the newer drivers we've added this cycle.

  Summary:

   - Allow drivers to flag if they are unidirectional.

   - Support for DTR mode and hardware acceleration of dummy cycles in
     spi-mem.

   - Support for Allwinder H616, Intel Lightning Mountain, nVidia Tegra
     QuadSPI, Realtek RTL838x and RTL839x.

   - Removal of obsolete EFM32, Txx9 and SIRF Prima and Atlas drivers"

* tag 'spi-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (76 commits)
  spi: Skip zero-length transfers in spi_transfer_one_message()
  spi: dw: Avoid stack content exposure
  spi: cadence-quadspi: Use spi_mem_dtr_supports_op()
  spi: spi-mem: add spi_mem_dtr_supports_op()
  spi: atmel-quadspi: Disable the QSPI IP at suspend()
  spi: pxa2xx: Add IDs for the controllers found on Intel Lynxpoint
  spi: pxa2xx: Fix the controller numbering for Wildcat Point
  spi: Change provied to provided in the file spi.h
  spi: mediatek: add set_cs_timing support
  spi: support CS timing for HW & SW mode
  spi: add power control when set_cs_timing
  spi: stm32: make spurious and overrun interrupts visible
  spi: stm32h7: replace private SPI_1HZ_NS with NSEC_PER_SEC
  spi: stm32: defer probe for reset
  spi: stm32: driver uses reset controller only at init
  spi: stm32h7: ensure message are smaller than max size
  spi: stm32: use bitfield macros
  spi: stm32: do not mandate cs_gpio
  spi: stm32: properly handle 0 byte transfer
  spi: clps711xx: remove redundant white-space
  ...

Pull regulator updates from Mark Brown:
 "Quite an active release for driver specific updates but very little
  going on at the subsystem level this time for the regulator API.

  Summary:

   - Overhaul of the Qualcomm LABIBB driver.

   - Allow use of regulator_sync_voltage() on coupled regulators.

   - Support for Action ATC260x, Mediatek DVSRC and MT6315, Qualcomm
     PCM8180/c and PM8009-1 and Richtek RT4831

   - Removal of the AB3100 driver"

* tag 'regulator-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (49 commits)
  regulator: bd718x7, bd71828, Fix dvs voltage levels
  regulator: pca9450: Add sd-vsel GPIO
  regulator: pca9450: Enable system reset on WDOG_B assertion
  regulator: pca9450: Add SD_VSEL GPIO for LDO5
  regulator: qcom-rpmh: fix pm8009 ldo7
  regulator: mt6315: Add support for MT6315 regulator
  regulator: document binding for MT6315 regulator
  regulator: dt-bindings: Document charger-supply for max8997
  regulator: qcom-labibb: Use disable_irq_nosync from isr
  regulator: pf8x00: Fix typo for PF8200 chip name
  regulator: pf8x00: set ramp_delay for bucks
  regulator: core: Avoid debugfs: Directory ... already present! error
  regulator: pf8x00: Add suspend support
  regulator: Make regulator_sync_voltage() usable by coupled regulators
  regulator: s5m8767: Drop regulators OF node reference
  regulator: qcom-rpmh: Add pmc8180 and pmc8180c
  regulator: qcom-rpmh: Add pmc8180 and pmc8180c
  regulator: s5m8767: Fix reference count leak
  regulator: remove ab3100 driver
  regulator: axp20x: Fix reference cout leak
  ...

Pull regmap update from Mark Brown:
 "Just one simple code style improvement this time, no features.

  There is an addition to add a new SoundWire regmap type but that
  should be coming via the SoundWire tree as the support for the
  underlying bus features was only added this cycle"

* tag 'regmap-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: Assign boolean values to a bool variable