The term "preempt_v" represents the RISCV_PREEMPT_V field of riscv_v_flags
and is used in lots of comments.

Here corrects the miss-spelling "prempt_v". And s/acheived/achieved/.
Reviewed-by: Andy Chiu <andybnac@gmail.com>
Signed-off-by: Song Shuai <songshuaishuai@tinylab.org>
Link: https://lore.kernel.org/r/20240221100252.3990445-1-songshuaishuai@tinylab.orgSigned-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Charlie Jenkins <charlie@rivosinc.com> says:

On riscv, mmap currently returns an address from the largest address
space that can fit entirely inside of the hint address. This makes it
such that the hint address is almost never returned. This patch raises
the mappable area up to and including the hint address. This allows mmap
to often return the hint address, which allows a performance improvement
over searching for a valid address as well as making the behavior more
similar to other architectures.

Note that a previous patch introduced stronger semantics compared to
other architectures for riscv mmap. On riscv, mmap will not use bits in
the upper bits of the virtual address depending on the hint address. On
other architectures, a random address is returned in the address space
requested. On all architectures the hint address will be returned if it
is available. This allows riscv applications to configure how many bits
in the virtual address should be left empty. This has the two benefits
of being able to request address spaces that are smaller than the
default and doesn't require the application to know the page table
layout of riscv.

* b4-shazam-merge:
  docs: riscv: Define behavior of mmap
  selftests: riscv: Generalize mm selftests
  riscv: mm: Use hint address in mmap if available

Link: https://lore.kernel.org/r/20240130-use_mmap_hint_address-v3-0-8a655cfa8bcb@rivosinc.comSigned-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Charlie Jenkins <charlie@rivosinc.com> says:

If the hardware unaligned access speed is known at compile time, it is
possible to avoid running the unaligned access speed probe to speedup
boot-time.

* b4-shazam-merge:
  riscv: Set unaligned access speed at compile time
  riscv: Decouple emulated unaligned accesses from access speed
  riscv: Only check online cpus for emulated accesses
  riscv: lib: Introduce has_fast_unaligned_access()

Link: https://lore.kernel.org/r/20240308-disable_misaligned_probe_config-v9-0-a388770ba0ce@rivosinc.comSigned-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Yu Chien Peter Lin <peterlin@andestech.com> says:

This patch series introduces the Andes PMU extension, which serves the
same purpose as Sscofpmf and Smcntrpmf. Its non-standard local interrupt
is assigned to bit 18 in the custom S-mode local interrupt enable and
pending registers (slie/slip), while the interrupt cause is (256 + 18).

* b4-shazam-merge:
  riscv: andes: Support specifying symbolic firmware and hardware raw events
  riscv: dts: renesas: Add Andes PMU extension for r9a07g043f
  dt-bindings: riscv: Add Andes PMU extension description
  perf: RISC-V: Introduce Andes PMU to support perf event sampling
  perf: RISC-V: Eliminate redundant interrupt enable/disable operations
  riscv: dts: renesas: r9a07g043f: Update compatible string to use Andes INTC
  dt-bindings: riscv: Add Andes interrupt controller compatible string
  riscv: errata: Rename defines for Andes

Link: https://lore.kernel.org/r/20240222083946.3977135-1-peterlin@andestech.comSigned-off-by: Palmer Dabbelt <palmer@rivosinc.com>

I'm picking this up on top of the broken patch for the merge window, as
the offending patch breaks the rv32 build and was itself a fix so isn't
on for-next.

* b4-shazam-merge:
  riscv: Fix compilation error with FAST_GUP and rv32
  riscv: Fix pte_leaf_size() for NAPOT
  Revert "riscv: mm: support Svnapot in huge vmap"

Link: https://lore.kernel.org/r/20240304080247.387710-1-alexghiti@rivosinc.comSigned-off-by: Palmer Dabbelt <palmer@rivosinc.com>

By surrounding the definition of pte_leaf_size() with a ifdef napot as
it should have been.

Fixes: e0fe5ab4 ("riscv: Fix pte_leaf_size() for NAPOT")
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Link: https://lore.kernel.org/r/20240304080247.387710-1-alexghiti@rivosinc.comSigned-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Define mmap on riscv to not provide an address that uses more bits than
the hint address, if provided.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20240130-use_mmap_hint_address-v3-3-8a655cfa8bcb@rivosinc.comSigned-off-by: Palmer Dabbelt <palmer@rivosinc.com>

The behavior of mmap on riscv is defined to not provide an address that
uses more bits than the hint address, if provided. Make the tests
reflect that.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20240130-use_mmap_hint_address-v3-2-8a655cfa8bcb@rivosinc.comSigned-off-by: Palmer Dabbelt <palmer@rivosinc.com>

On riscv it is guaranteed that the address returned by mmap is less than
the hint address. Allow mmap to return an address all the way up to
addr, if provided, rather than just up to the lower address space.

This provides a performance benefit as well, allowing mmap to exit after
checking that the address is in range rather than searching for a valid
address.

It is possible to provide an address that uses at most the same number
of bits, however it is significantly more computationally expensive to
provide that number rather than setting the max to be the hint address.
There is the instruction clz/clzw in Zbb that returns the highest set bit
which could be used to performantly implement this, but it would still
be slower than the current implementation. At worst case, half of the
address would not be able to be allocated when a hint address is
provided.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20240130-use_mmap_hint_address-v3-1-8a655cfa8bcb@rivosinc.comSigned-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Introduce Kconfig options to set the kernel unaligned access support.
These options provide a non-portable alternative to the runtime
unaligned access probe.

To support this, the unaligned access probing code is moved into it's
own file and gated behind a new RISCV_PROBE_UNALIGNED_ACCESS_SUPPORT
option.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20240308-disable_misaligned_probe_config-v9-4-a388770ba0ce@rivosinc.comSigned-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Detecting if a system traps into the kernel on an unaligned access
can be performed separately from checking the speed of unaligned
accesses. This decoupling will make it possible to selectively enable
or disable each of these checks.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20240308-disable_misaligned_probe_config-v9-3-a388770ba0ce@rivosinc.comSigned-off-by: Palmer Dabbelt <palmer@rivosinc.com>

The unaligned access checker only sets valid values for online cpus.
Check for these values on online cpus rather than on present cpus.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Fixes: 71c54b3d ("riscv: report misaligned accesses emulation to hwprobe")
Tested-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20240308-disable_misaligned_probe_config-v9-2-a388770ba0ce@rivosinc.comSigned-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Create has_fast_unaligned_access to avoid needing to explicitly check
the fast_misaligned_access_speed_key static key.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Evan Green <evan@rivosinc.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20240308-disable_misaligned_probe_config-v9-1-a388770ba0ce@rivosinc.comSigned-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Add the Andes AX45 JSON files that allows specifying symbolic event
names for the raw PMU events.
Signed-off-by: Locus Wei-Han Chen <locus84@andestech.com>
Reviewed-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Charles Ci-Jyun Wu <dminus@andestech.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Atish Patra <atishp@rivosinc.com>
Acked-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20240222083946.3977135-11-peterlin@andestech.comSigned-off-by: Palmer Dabbelt <palmer@rivosinc.com>

xandespmu stands for Andes Performance Monitor Unit extension.
Based on the added Andes PMU ISA string, the SBI PMU driver
will make use of the non-standard irq source.
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240222083946.3977135-10-peterlin@andestech.comSigned-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Document the ISA string for Andes Technology performance monitor
extension which provides counter overflow interrupt and mode
filtering mechanisms.
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20240222083946.3977135-9-peterlin@andestech.comSigned-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Assign riscv_pmu_irq_num the value of (256 + 18) for the custome PMU
and add SSCOUNTOVF and SIP alternatives to ALT_SBI_PMU_OVERFLOW()
and ALT_SBI_PMU_OVF_CLEAR_PENDING() macros, respectively.

To make use of Andes PMU extension, "xandespmu" needs to be appended
to the riscv,isa-extensions for each cpu node in device-tree, and
make sure CONFIG_ANDES_CUSTOM_PMU is enabled.
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Charles Ci-Jyun Wu <dminus@andestech.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Co-developed-by: Locus Wei-Han Chen <locus84@andestech.com>
Signed-off-by: Locus Wei-Han Chen <locus84@andestech.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20240222083946.3977135-8-peterlin@andestech.comSigned-off-by: Palmer Dabbelt <palmer@rivosinc.com>

The interrupt enable/disable operations are already performed by the
IRQ chip functions riscv_intc_irq_unmask()/riscv_intc_irq_mask() during
enable_percpu_irq()/disable_percpu_irq(). It can be done only once.
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20240222083946.3977135-7-peterlin@andestech.comSigned-off-by: Palmer Dabbelt <palmer@rivosinc.com>

The Andes hart-level interrupt controller (Andes INTC) allows AX45MP
cores to handle custom local interrupts, such as the performance
counter overflow interrupt.
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240222083946.3977135-6-peterlin@andestech.comSigned-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Add "andestech,cpu-intc" compatible string to indicate that
Andes specific local interrupt is supported on the core,
e.g. AX45MP cores have 3 types of non-standard local interrupt
which can be handled in supervisor mode:

- Slave port ECC error interrupt
- Bus write transaction error interrupt
- Performance monitor overflow interrupt

These interrupts are enabled/disabled via a custom register
SLIE instead of the standard interrupt enable register SIE.
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20240222083946.3977135-5-peterlin@andestech.comSigned-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Use "ANDES" rather than "ANDESTECH" to unify the naming
convention with directory, file names, Kconfig options
and other definitions.
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Charles Ci-Jyun Wu <dminus@andestech.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20240222083946.3977135-2-peterlin@andestech.comSigned-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Merge tag 'irq-for-riscv-02-23-24' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip into for-next

INTC changes to consume for RISCV

* tag 'irq-for-riscv-02-23-24' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/riscv-intc: Introduce Andes hart-level interrupt controller
  irqchip/riscv-intc: Allow large non-standard interrupt number

pte_leaf_size() must be reimplemented to add support for NAPOT mappings.

Fixes: 82a1a1f3 ("riscv: mm: support Svnapot in hugetlb page")
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240227205016.121901-3-alexghiti@rivosinc.comSigned-off-by: Palmer Dabbelt <palmer@rivosinc.com>

This reverts commit ce173474.

We cannot correctly deal with NAPOT mappings in vmalloc/vmap because if
some part of a NAPOT mapping is unmapped, the remaining mapping is not
updated accordingly. For example:

ptr = vmalloc_huge(64 * 1024, GFP_KERNEL);
vunmap_range((unsigned long)(ptr + PAGE_SIZE),
	     (unsigned long)(ptr + 64 * 1024));

leads to the following kernel page table dump:

0xffff8f8000ef0000-0xffff8f8000ef1000    0x00000001033c0000         4K PTE N   ..     ..   D A G . . W R V

Meaning the first entry which was not unmapped still has the N bit set,
which, if accessed first and cached in the TLB, could allow access to the
unmapped range.

That's because the logic to break the NAPOT mapping does not exist and
likely won't. Indeed, to break a NAPOT mapping, we first have to clear
the whole mapping, flush the TLB and then set the new mapping ("break-
before-make" equivalent). That works fine in userspace since we can handle
any pagefault occurring on the remaining mapping but we can't handle a kernel
pagefault on such mapping.

So fix this by reverting the commit that introduced the vmap/vmalloc
support.

Fixes: ce173474 ("riscv: mm: support Svnapot in huge vmap")
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240227205016.121901-2-alexghiti@rivosinc.comSigned-off-by: Palmer Dabbelt <palmer@rivosinc.com>

LLVM commit 8e01042da9d3 ("[RISCV] Add missing dependency check for Zvkb
(#79467)") broke the check used by the TOOLCHAIN_HAS_VECTOR_CRYPTO
kconfig symbol because it made zvkb start depending on v or zve*.  Fix
this by specifying both v and zvkb when checking for support for zvkb.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240127090055.124336-1-ebiggers@kernel.orgSigned-off-by: Palmer Dabbelt <palmer@rivosinc.com>

These fixes are a dependency for the Zvkb patches, so I'm merging them
into for-next as well as fixes.

* commit '3aff0c45':
  RISC-V: Drop invalid test from CONFIG_AS_HAS_OPTION_ARCH
  kbuild: Add -Wa,--fatal-warnings to as-instr invocation

Add support for the Andes hart-level interrupt controller. This
controller provides interrupt mask/unmask functions to access the
custom register (SLIE) where the non-standard S-mode local interrupt
enable bits are located. The base of custom interrupt number is set
to 256.

To share the riscv_intc_domain_map() with the generic RISC-V INTC and
ACPI, add a chip parameter to riscv_intc_init_common(), so it can be
passed to the irq_domain_set_info() as a private data.

Andes hart-level interrupt controller requires the "andestech,cpu-intc"
compatible string to be present in interrupt-controller of cpu node to
enable the use of custom local interrupt source.
e.g.,

  cpu0: cpu@0 {
      compatible = "andestech,ax45mp", "riscv";
      ...
      cpu0-intc: interrupt-controller {
          #interrupt-cells = <0x01>;
          compatible = "andestech,cpu-intc", "riscv,cpu-intc";
          interrupt-controller;
      };
  };
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Randolph <randolph@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20240222083946.3977135-4-peterlin@andestech.com

Currently, the implementation of the RISC-V INTC driver uses the
interrupt cause as the hardware interrupt number, with a maximum of
64 interrupts. However, the platform can expand the interrupt number
further for custom local interrupts.

To fully utilize the available local interrupt sources, switch
to using irq_domain_create_tree() that creates the radix tree
map, add global variables (riscv_intc_nr_irqs, riscv_intc_custom_base
and riscv_intc_custom_nr_irqs) to determine the valid range of local
interrupt number (hwirq).
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Randolph <randolph@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20240222083946.3977135-3-peterlin@andestech.com

Commit e4bb020f ("riscv: detect assembler support for .option arch")
added two tests, one for a valid value to '.option arch' that should
succeed and one for an invalid value that is expected to fail to make
sure that support for '.option arch' is properly detected because Clang
does not error when '.option arch' is not supported:

  $ clang --target=riscv64-linux-gnu -Werror -x assembler -c -o /dev/null <(echo '.option arch, +m')
  /dev/fd/63:1:9: warning: unknown option, expected 'push', 'pop', 'rvc', 'norvc', 'relax' or 'norelax'
  .option arch, +m
          ^
  $ echo $?
  0

Unfortunately, the invalid test started being accepted by Clang after
the linked llvm-project change, which causes CONFIG_AS_HAS_OPTION_ARCH
and configurations that depend on it to be silently disabled, even
though those versions do support '.option arch'.

The invalid test can be avoided altogether by using
'-Wa,--fatal-warnings', which will turn all assembler warnings into
errors, like '-Werror' does for the compiler:

  $ clang --target=riscv64-linux-gnu -Werror -Wa,--fatal-warnings -x assembler -c -o /dev/null <(echo '.option arch, +m')
  /dev/fd/63:1:9: error: unknown option, expected 'push', 'pop', 'rvc', 'norvc', 'relax' or 'norelax'
  .option arch, +m
          ^
  $ echo $?
  1

The as-instr macros have been updated to make use of this flag, so
remove the invalid test, which allows CONFIG_AS_HAS_OPTION_ARCH to work
for all compiler versions.

Cc: stable@vger.kernel.org
Fixes: e4bb020f ("riscv: detect assembler support for .option arch")
Link: https://github.com/llvm/llvm-project/commit/3ac9fe69f70a2b3541266daedbaaa7dc9c007a2aReported-by: Eric Biggers <ebiggers@kernel.org>
Closes: https://lore.kernel.org/r/20240121011341.GA97368@sol.localdomain/Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Eric Biggers <ebiggers@google.com>
Tested-by: Andy Chiu <andybnac@gmail.com>
Reviewed-by: Andy Chiu <andybnac@gmail.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20240125-fix-riscv-option-arch-llvm-18-v1-2-390ac9cc3cd0@kernel.orgSigned-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Certain assembler instruction tests may only induce warnings from the
assembler on an unsupported instruction or option, which causes as-instr
to succeed when it was expected to fail. Some tests workaround this
limitation by additionally testing that invalid input fails as expected.
However, this is fragile if the assembler is changed to accept the
invalid input, as it will cause the instruction/option to be unavailable
like it was unsupported even when it is.

Use '-Wa,--fatal-warnings' in the as-instr macro to turn these warnings
into hard errors, which avoids this fragility and makes tests more
robust and well formed.

Cc: stable@vger.kernel.org
Suggested-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Eric Biggers <ebiggers@google.com>
Tested-by: Andy Chiu <andybnac@gmail.com>
Reviewed-by: Andy Chiu <andybnac@gmail.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20240125-fix-riscv-option-arch-llvm-18-v1-1-390ac9cc3cd0@kernel.orgSigned-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Enable the mmc controller driver and dma controller driver needed for
T-Head TH1520 based boards, like the LicheePi 4A and BeagleV-Ahead, to
boot from eMMC storage.
Reviewed-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Drew Fustini <dfustini@baylibre.com>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://lore.kernel.org/r/20231206-th1520_mmc_dts-v8-1-69220e373e8f@baylibre.comSigned-off-by: Palmer Dabbelt <palmer@rivosinc.com>

RISC-V was lacking a membarrier implementation for the store/fetch
ordering, which is a bit tricky because of the deferred icache flushing
we use in RISC-V.

* b4-shazam-merge:
  membarrier: riscv: Provide core serializing command
  locking: Introduce prepare_sync_core_cmd()
  membarrier: Create Documentation/scheduler/membarrier.rst
  membarrier: riscv: Add full memory barrier in switch_mm()

Link: https://lore.kernel.org/r/20240131144936.29190-1-parri.andrea@gmail.comSigned-off-by: Palmer Dabbelt <palmer@rivosinc.com>

RISC-V uses xRET instructions on return from interrupt and to go back
to user-space; the xRET instruction is not core serializing.

Use FENCE.I for providing core serialization as follows:

 - by calling sync_core_before_usermode() on return from interrupt (cf.
   ipi_sync_core()),

 - via switch_mm() and sync_core_before_usermode() (respectively, for
   uthread->uthread and kthread->uthread transitions) before returning
   to user-space.

On RISC-V, the serialization in switch_mm() is activated by resetting
the icache_stale_mask of the mm at prepare_sync_core_cmd().
Suggested-by: Palmer Dabbelt <palmer@dabbelt.com>
Signed-off-by: Andrea Parri <parri.andrea@gmail.com>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/r/20240131144936.29190-5-parri.andrea@gmail.comSigned-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Introduce an architecture function that architectures can use to set
up ("prepare") SYNC_CORE commands.

The function will be used by RISC-V to update its "deferred icache-
flush" data structures (icache_stale_mask).

Architectures defining prepare_sync_core_cmd() static inline need to
select ARCH_HAS_PREPARE_SYNC_CORE_CMD.
Suggested-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Andrea Parri <parri.andrea@gmail.com>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/r/20240131144936.29190-4-parri.andrea@gmail.comSigned-off-by: Palmer Dabbelt <palmer@rivosinc.com>

To gather the architecture requirements of the "private/global
expedited" membarrier commands.  The file will be expanded to
integrate further information about the membarrier syscall (as
needed/desired in the future).  While at it, amend some related
inline comments in the membarrier codebase.
Suggested-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Andrea Parri <parri.andrea@gmail.com>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/r/20240131144936.29190-3-parri.andrea@gmail.comSigned-off-by: Palmer Dabbelt <palmer@rivosinc.com>

The membarrier system call requires a full memory barrier after storing
to rq->curr, before going back to user-space.  The barrier is only
needed when switching between processes: the barrier is implied by
mmdrop() when switching from kernel to userspace, and it's not needed
when switching from userspace to kernel.

Rely on the feature/mechanism ARCH_HAS_MEMBARRIER_CALLBACKS and on the
primitive membarrier_arch_switch_mm(), already adopted by the PowerPC
architecture, to insert the required barrier.

Fixes: fab957c1 ("RISC-V: Atomic and Locking Code")
Signed-off-by: Andrea Parri <parri.andrea@gmail.com>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/r/20240131144936.29190-2-parri.andrea@gmail.comSigned-off-by: Palmer Dabbelt <palmer@rivosinc.com>

There's code duplication between the fallback implementation for bitops
__ffs/__fls/ffs/fls API and the generic C implementation in
include/asm-generic/bitops/. To avoid this duplication, this patch renames
the generic C implementation by adding a "generic_" prefix to them, then we
can use these generic APIs as fallback.
Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20231112094421.4014931-1-xiao.w.wang@intel.comSigned-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Inspired from arm64's implement -- commit 70918779
("arm64: entry: Enable random_kstack_offset support")

Add support of kernel stack offset randomization while handling syscall,
the offset is defaultly limited by KSTACK_OFFSET_MAX() (i.e. 10 bits).

In order to avoid trigger stack canaries (due to __builtin_alloca) and
slowing down the entry path, use __no_stack_protector attribute to
disable stack protector for do_trap_ecall_u() at the function level.
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Song Shuai <songshuaishuai@tinylab.org>
Link: https://lore.kernel.org/r/20231109133751.212079-1-songshuaishuai@tinylab.orgSigned-off-by: Palmer Dabbelt <palmer@rivosinc.com>

./arch/riscv/kernel/smpboot.c: asm/cpufeature.h is included more than once.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=7086Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/20231031004018.45074-1-yang.lee@linux.alibaba.comSigned-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Adding kprobes on some assembly functions (mainly exception handling)
will result in crashes (either recursive trap or panic). To avoid such
errors, add ASM_NOKPROBE() macro which allow adding specific symbols
into the __kprobe_blacklist section and use to blacklist the following
symbols that showed to be problematic:
- handle_exception()
- ret_from_exception()
- handle_kernel_stack_overflow()
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20231004131009.409193-1-cleger@rivosinc.comSigned-off-by: Palmer Dabbelt <palmer@rivosinc.com>