- 18 Jan, 2023 1 commit
-
-
Jiri Olsa authored
Currently we allow to load any tracing program as sleepable, but BPF_TRACE_RAW_TP can't sleep. Making the check explicit for tracing programs attach types, so sleepable BPF_TRACE_RAW_TP will fail to load. Updating the verifier error to mention iter programs as well. Acked-by:
Song Liu <song@kernel.org> Acked-by:
Yonghong Song <yhs@fb.com> Signed-off-by:
Jiri Olsa <jolsa@kernel.org> Link: https://lore.kernel.org/r/20230117223705.440975-1-jolsa@kernel.orgSigned-off-by:
Alexei Starovoitov <ast@kernel.org>
-
- 17 Jan, 2023 1 commit
-
-
Martin Rodriguez Reboredo authored
Version 1.24 of pahole has the capability to exclude compilation units (CUs) of specific languages [1] [2]. Rust, as of writing, is not currently supported by pahole and if it's used with a build that has BTF debugging enabled it results in malformed kernel and module binaries [3]. So it's better for pahole to exclude Rust CUs until support for it arrives. Co-developed-by:
Eric Curtin <ecurtin@redhat.com> Signed-off-by:
Martin Rodriguez Reboredo <yakoyoku@gmail.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Tested-by:
Neal Gompa <neal@gompa.dev> Acked-by:
Miguel Ojeda <ojeda@kernel.org> Acked-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Link: https://git.kernel.org/pub/scm/devel/pahole/pahole.git/commit/?id=49358dfe2aaae4e90b072332c3e324019826783f [1] Link: https://git.kernel.org/pub/scm/devel/pahole/pahole.git/commit/?id=8ee363790b7437283c53090a85a9fec2f0b0fbc4 [2] Link: https://github.com/Rust-for-Linux/linux/issues/735 [3] Link: https://lore.kernel.org/bpf/20230111152050.559334-1-yakoyoku@gmail.com
-
- 15 Jan, 2023 14 commits
-
-
Alexei Starovoitov authored
"Daniel T. Lee" says: ==================== Currently, there are many programs under samples/bpf to test the various functionality of BPF that have been developed for a long time. However, the kernel (BPF) has changed a lot compared to the 2016 when some of these test programs were first introduced. Therefore, some of these programs use the deprecated function of BPF, and some programs no longer work normally due to changes in the API. To list some of the kernel changes that this patch set is focusing on, - legacy BPF map declaration syntax support had been dropped [1] - bpf_trace_printk() always append newline at the end [2] - deprecated styled BPF section header (bpf_load style) [3] - urandom_read tracepoint is removed (used for testing overhead) [4] - ping sends packet with SOCK_DGRAM instead of SOCK_RAW [5]* - use "vmlinux.h" instead of including individual headers In addition to this, this patchset tries to modernize the existing testing scripts a bit. And for network-related testing programs, a separate header file was created and applied. (To use the Endianness conversion function from xdp_sample and bunch of constants) [1]: https://github.com/libbpf/libbpf/issues/282 [2]: commit ac5a72ea ("bpf: Use dedicated bpf_trace_printk event instead of trace_printk()") [3]: commit ceb5dea5 ("samples: bpf: Remove bpf_load loader completely") [4]: commit 14c17463 ("random: remove unused tracepoints") [5]: https://lwn.net/Articles/422330/ *: This is quite old, but I'm not sure why the code was initially developed to filter only SOCK_RAW. ==================== Signed-off-by:
-
Daniel T. Lee authored
This commit changes the _kern suffix to .bpf with the BPF test programs. With this modification, test programs will inherit the benefit of the new CLANG-BPF compile target. Signed-off-by:
Daniel T. Lee <danieltimlee@gmail.com> Link: https://lore.kernel.org/r/20230115071613.125791-11-danieltimlee@gmail.comSigned-off-by:
-
Daniel T. Lee authored
This commit applies vmlinux.h to BPF functionality testing program. Macros that were not defined despite migration to "vmlinux.h" were defined separately in individual files. Signed-off-by:
-
Daniel T. Lee authored
This commit applies "net_shared.h" to BPF programs to remove existing network related header dependencies. Also, this commit removes unnecessary headers before applying "vmlinux.h" to the BPF programs. Mostly, endianness conversion function has been applied to the source. In addition, several macros have been defined to fulfill the INET, TC-related constants. Signed-off-by:
-
Daniel T. Lee authored
Currently, many programs under sample/bpf often include individual macros by directly including the header under "linux/" rather than using the "vmlinux.h" header. However, there are some problems with migrating to "vmlinux.h" because there is no definition for utility functions such as endianness conversion (ntohs/htons). Fortunately, the xdp_sample program already has a function that can be replaced to solve this problem. Therefore, this commit attempts to separate these functions into a file called net_shared.h to make them universally available. Additionally, this file includes network-related macros that are not defined in "vmlinux.h". (inspired by 'selftests' bpf_tracing_net.h) Signed-off-by:
-
Daniel T. Lee authored
With libbpf 1.0 release, support for legacy BPF map declaration syntax had been dropped. If you run a program using legacy BPF in the latest libbpf, the following error will be output. libbpf: map 'lwt_len_hist_map' (legacy): legacy map definitions are deprecated, use BTF-defined maps instead libbpf: Use of BPF_ANNOTATE_KV_PAIR is deprecated, use BTF-defined maps in .maps section instead This commit replaces legacy map with the BTF-defined map. Signed-off-by: -
Daniel T. Lee authored
The test_overhead bpf program is designed to compare performance between tracepoint and kprobe. Initially it used task_rename and urandom_read tracepoint. However, commit 14c17463 ("random: remove unused tracepoints") removed urandom_read tracepoint, and for this reason the test_overhead got broken. This commit introduces new microbenchmark using fib_table_lookup. This microbenchmark sends UDP packets to localhost in order to invoke fib_table_lookup. In a nutshell: fd = socket(AF_INET, SOCK_DGRAM, IPPROTO_UDP); addr.sin_addr.s_addr = inet_addr(DUMMY_IP); addr.sin_port = htons(DUMMY_PORT); for() { sendto(fd, buf, strlen(buf), 0, (struct sockaddr *)&addr, sizeof(addr)); } on 4 cpus in parallel: lookup per sec base (no tracepoints, no kprobes) 381k with kprobe at fib_table_lookup() 325k with tracepoint at fib:fib_table_lookup 330k with raw_tracepoint at fib:fib_table_lookup 365k Fixes: 14c17463 ("random: remove unused tracepoints") Signed-off-by:
-
Daniel T. Lee authored
Currently, executing test_cgrp2_sock2 fails due to wrong section header. This 'cgroup/sock1' style section is previously used at 'samples/bpf_load' (deprecated) BPF loader. Because this style isn't supported in libbpf, this commit fixes this problem by correcting the section header. $ sudo ./test_cgrp2_sock2.sh libbpf: prog 'bpf_prog1': missing BPF prog type, check ELF section name 'cgroup/sock1' libbpf: prog 'bpf_prog1': failed to load: -22 libbpf: failed to load object './sock_flags_kern.o' ERROR: loading BPF object file failed In addition, this BPF program filters ping packets by comparing whether the socket type uses SOCK_RAW. However, after the ICMP socket[1] was developed, ping sends ICMP packets using SOCK_DGRAM. Therefore, in this commit, the packet filtering is changed to use SOCK_DGRAM instead of SOCK_RAW. $ strace --trace socket ping -6 -c1 -w1 ::1 socket(AF_INET6, SOCK_DGRAM, IPPROTO_ICMPV6) = 3 [1]: https://lwn.net/Articles/422330/Signed-off-by: -
Daniel T. Lee authored
The test_lwt_bpf is a script that tests the functionality of BPF through the output of the ftrace with bpf_trace_printk. Currently, this program is not operating normally for several reasons. First of all, this test script can't parse the ftrace results properly. GNU sed tries to be as greedy as possible when attempting pattern matching. Due to this, cutting metadata (such as timestamp) from the log entry of ftrace doesn't work properly, and also desired log isn't extracted properly. To make sed stripping clearer, 'nocontext-info' option with the ftrace has been used to remove metadata from the log. Also, instead of using unclear pattern matching, this commit specifies an explicit parse pattern. Also, unlike before when this test was introduced, the way bpf_trace_printk behaves has changed[1]. The previous bpf_trace_printk had to always have '\n' in order to print newline, but now that the bpf_trace_printk call includes newline by default, so '\n' is no longer needed. Lastly with the lwt ENCAP_BPF out, the context information with the sk_buff protocol is preserved. Therefore, this commit changes the previous test result from 'protocol 0' to 'protocol 8', which means ETH_P_IP. [1]: commit ac5a72ea ("bpf: Use dedicated bpf_trace_printk event instead of trace_printk()") Signed-off-by:
-
Daniel T. Lee authored
Currently, some test scripts are experiencing minor errors related to executing tests. $ sudo ./test_cgrp2_sock.sh ./test_cgrp2_sock.sh: 22: test_cgrp2_sock: not found This problem occurs because the path to the execution target is not properly specified. Therefore, this commit solves this problem by specifying a relative path to its executables. This commit also makes a concise refactoring of hard-coded BPF program names. Signed-off-by: -
Daniel T. Lee authored
Currently, a few of BPF tests use ipv6 functionality. The problem here is that if ipv6 is disabled, these tests will fail, and even if the test fails, it will not tell you why it failed. $ sudo ./test_cgrp2_sock2.sh RTNETLINK answers: Permission denied In order to fix this, this commit ensures ipv6 is enabled prior to running tests. Signed-off-by: -
Martin KaFai Lau authored
Ziyang Xuan says: ==================== Add ipip6 and ip6ip decap support for bpf_skb_adjust_room(). Main use case is for using cls_bpf on ingress hook to decapsulate IPv4 over IPv6 and IPv6 over IPv4 tunnel packets. And add ipip6 and ip6ip decap testcases to verify that bpf_skb_adjust_room() correctly decapsulate ipip6 and ip6ip tunnel packets. $./test_tc_tunnel.sh ipip encap 192.168.1.1 to 192.168.1.2, type ipip, mac none len 100 test basic connectivity 0 test bpf encap without decap (expect failure) Ncat: TIMEOUT. 1 test bpf encap with tunnel device decap 0 test bpf encap with bpf decap 0 OK ipip6 encap 192.168.1.1 to 192.168.1.2, type ipip6, mac none len 100 test basic connectivity 0 test bpf encap without decap (expect failure) Ncat: TIMEOUT. 1 test bpf encap with tunnel device decap 0 test bpf encap with bpf decap 0 OK ip6ip6 encap fd::1 to fd::2, type ip6tnl, mac none len 100 test basic connectivity 0 test bpf encap without decap (expect failure) Ncat: TIMEOUT. 1 test bpf encap with tunnel device decap 0 test bpf encap with bpf decap 0 OK sit encap fd::1 to fd::2, type sit, mac none len 100 test basic connectivity 0 test bpf encap without decap (expect failure) Ncat: TIMEOUT. 1 test bpf encap with tunnel device decap 0 test bpf encap with bpf decap 0 OK ... OK. All tests passed v3: - Fix compilation failure of selftests/bpf. - Combine two new branches in bpf_skb_adjust_room(). - Simplify description for new flags BPF_F_ADJ_ROOM_DECAP_L3_IP*. v2: - Use decap flags to indicate the new IP header. Do not rely on skb->encapsulation. ==================== Signed-off-by:Martin KaFai Lau <martin.lau@kernel.org>
-
Ziyang Xuan authored
Add ipip6 and ip6ip decap testcases. Verify that bpf_skb_adjust_room() correctly decapsulate ipip6 and ip6ip tunnel packets. Signed-off-by:
Ziyang Xuan <william.xuanziyang@huawei.com> Reviewed-by:
Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/dfd2d8cfdf9111bd129170d4345296f53bee6a67.1673574419.git.william.xuanziyang@huawei.comSigned-off-by:
-
Ziyang Xuan authored
Add ipip6 and ip6ip decap support for bpf_skb_adjust_room(). Main use case is for using cls_bpf on ingress hook to decapsulate IPv4 over IPv6 and IPv6 over IPv4 tunnel packets. Add two new flags BPF_F_ADJ_ROOM_DECAP_L3_IPV{4,6} to indicate the new IP header version after decapsulating the outer IP header. Suggested-by:
-
- 13 Jan, 2023 3 commits
-
-
Roberto Valenzuela authored
Add the missing space after 'dest' variable assignment. This change will resolve the following checkpatch.pl script error: ERROR: spaces required around that '+=' (ctx:VxW) Signed-off-by:
Roberto Valenzuela <valenzuelarober@gmail.com> Signed-off-by:
Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20230113180257.39769-1-valenzuelarober@gmail.com
-
Menglong Dong authored
'.' is not allowed in the event name of kprobe. Therefore, we will get a EINVAL if the kernel function name has a '.' in legacy kprobe attach case, such as 'icmp_reply.constprop.0'. In order to adapt this case, we need to replace the '.' with other char in gen_kprobe_legacy_event_name(). And I use '_' for this propose. Signed-off-by:
Menglong Dong <imagedong@tencent.com> Signed-off-by:
Alan Maguire <alan.maguire@oracle.com> Link: https://lore.kernel.org/bpf/20230113093427.1666466-1-imagedong@tencent.com
-
Holger Hoffstätte authored
When the clang toolchain has stack protection enabled in order to be consistent with gcc - which just happens to be the case on Gentoo - the bpftool build fails: [...] clang \ -I. \ -I/tmp/portage/dev-util/bpftool-6.0.12/work/linux-6.0/tools/include/uapi/ \ -I/tmp/portage/dev-util/bpftool-6.0.12/work/linux-6.0/tools/bpf/bpftool/bootstrap/libbpf/include \ -g -O2 -Wall -target bpf -c skeleton/pid_iter.bpf.c -o pid_iter.bpf.o clang \ -I. \ -I/tmp/portage/dev-util/bpftool-6.0.12/work/linux-6.0/tools/include/uapi/ \ -I/tmp/portage/dev-util/bpftool-6.0.12/work/linux-6.0/tools/bpf/bpftool/bootstrap/libbpf/include \ -g -O2 -Wall -target bpf -c skeleton/profiler.bpf.c -o profiler.bpf.o skeleton/profiler.bpf.c:40:14: error: A call to built-in function '__stack_chk_fail' is not supported. int BPF_PROG(fentry_XXX) ^ skeleton/profiler.bpf.c:94:14: error: A call to built-in function '__stack_chk_fail' is not supported. int BPF_PROG(fexit_XXX) ^ 2 errors generated. [...] Since stack-protector makes no sense for the BPF bits just unconditionally disable it. Bug: https://bugs.gentoo.org/890638Signed-off-by:Holger Hoffstätte <holger@applied-asynchrony.com> Signed-off-by:
Quentin Monnet <quentin@isovalent.com> Link: https://lore.kernel.org/bpf/74cd9d2e-6052-312a-241e-2b514a75c92c@applied-asynchrony.com
-
- 12 Jan, 2023 17 commits
-
-
Alexei Starovoitov authored
Magnus Karlsson says: ==================== This is a patch set of various performance improvements, fixes, and the introduction of more than one XDP program to the xsk selftests framework so we can test more things in the future such as upcoming multi-buffer and metadata support for AF_XDP. The new programs just reuse the framework that all the other eBPF selftests use. The new feature is used to implement one new test that does XDP_DROP on every other packet. More tests using this will be added in future commits. Contents: * The run-time of the test suite is cut by 10x when executing the tests on a real NIC, by only attaching the XDP program once per mode tested, instead of once per test program. * Over 700 lines of code have been removed. The xsk.c control file was moved straight over from libbpf when the xsk support was deprecated there. As it is now not used as library code that has to work with all kinds of versions of Linux, a lot of code could be dropped or simplified. * Add a new command line option "-d" that can be used when a test fails and you want to debug it with gdb or some other debugger. The option creates the two veth netdevs and prints them to the screen without deleting them afterwards. This way these veth netdevs can be used when running xskxceiver in a debugger. * Implemented the possibility to load external XDP programs so we can have more than the default one. This feature is used to implement a test where every other packet is dropped. Good exercise for the recycling mechanism of the xsk buffer pool used in zero-copy mode. * Various clean-ups and small fixes in patches 1 to 5. None of these fixes has any impact on the correct execution of the tests when they pass, though they can be irritating when a test fails. IMHO, they do not need to go to bpf as they will not fix anything there. The first version of patches 1, 2, and 4 where previously sent to bpf, but has now been included here. v2 -> v3: * Fixed compilation error for llvm [David] * Made the function xsk_is_in_drv_mode(ifobj) more generic by changing it to xsk_is_in_mode(ifobj, xdp_mode) [Maciej] * Added Maciej's acks to all the patches v1 -> v2: * Fixed spelling error in commit message of patch #6 [Björn] * Added explanation on why it is safe to use C11 atomics in patch #7 [Daniel] * Put all XDP programs in the same file so that adding more XDP programs to xskxceiver.c becomes more scalable in patches #11 and #12 [Maciej] * Removed more dead code in patch #8 [Maciej] * Removed stale %s specifier in error print, patch #9 [Maciej] * Changed name of XDP_CONSUMES_SOME_PACKETS to XDP_DROP_HALF to hopefully make it clearer [Maciej] * ifobj_rx and ifobj_tx name changes in patch #13 [Maciej] * Simplified XDP attachment code in patch #15 [Maciej] Patches: 1-5: Small fixes and clean-ups 6: New convenient debug option when using a debugger such as gdb 7-8: Removal of unnecessary code 9: Add the ability to load external XDP programs 10-11: Removal of more unnecessary code 12: Implement a new test where every other packet is XDP_DROP:ed 13: Unify the thread dispatching code 14-15: Simplify the way tests are written when using custom packet_streams or custom XDP programs Thanks: Magnus ==================== Signed-off-by: -
Magnus Karlsson authored
Implement automatic switching of XDP programs and execution modes if needed by a test. This makes it much simpler to write a test as it only has to say what XDP program it needs if it is not the default one. This also makes it possible to remove the initial explicit attachment of the XDP program as well as the explicit mode switch in the code. These are now handled by the same code that just checks if a switch is necessary, so no special cases are needed. The default XDP program for all tests is one that sends all packets to the AF_XDP socket. If you need another one, please use the new function test_spec_set_xdp_prog() to specify what XDP programs and maps to use for this test. Signed-off-by:
Magnus Karlsson <magnus.karlsson@intel.com> Acked-by:
Maciej Fijalkowski <maciej.fijalkowski@intel.com> Link: https://lore.kernel.org/r/20230111093526.11682-16-magnus.karlsson@gmail.comSigned-off-by:
-
Magnus Karlsson authored
Automatically restore the default packet stream if needed at the end of each test. This so that test writers do not forget to do this. Signed-off-by:
-
Magnus Karlsson authored
Make the thread dispatching code common by unifying the dual and single thread dispatcher code. This so we do not have to add code in two places in upcoming commits. Signed-off-by:
-
Magnus Karlsson authored
Add a new test where some of the packets are not passed to the AF_XDP socket and instead get a XDP_DROP verdict. This is important as it tests the recycling mechanism of the buffer pool. If a packet is not sent to the AF_XDP socket, the buffer the packet resides in is instead recycled so it can be used again without the round-trip to user space. The test introduces a new XDP program that drops every other packet. Signed-off-by:
-
Magnus Karlsson authored
Get rid of the built-in XDP program that was part of the old libbpf code in xsk.c and replace it with an eBPF program build using the framework by all the other bpf selftests. This will form the base for adding more programs in later commits. Signed-off-by:
-
Magnus Karlsson authored
Remove unnecessary code in the control path. This is located in the file xsk.c that was moved from libbpf when the xsk support there was deprecated. Some of the code there is not needed anymore as the selftests are only guaranteed to run on the kernel it is shipped with. Therefore, all the code that has to deal with compatibility of older kernels can be dropped and also any other function that is not of any use for the tests. Signed-off-by:
-
Magnus Karlsson authored
Load and attach the XDP program only once per XDP mode that is being executed. Today, the XDP program is loaded and attached for every test, then unloaded, which takes a long time on real NICs, since they have to reconfigure their HW, in contrast to veth. The test suite now completes in 21 seconds, instead of 207 seconds previously on my machine. This is a speed-up of around 10x. This is accomplished by moving the XDP loading from the worker threads to the main thread and replacing the XDP loading interfaces of xsk.c that was taken from the xsk support in libbpf, with something more explicit that is more useful for these tests. Instead, the relevant file descriptors and ifindexes are just passed down to the new functions. Signed-off-by:
-
Magnus Karlsson authored
Remove the namespaces used as they fill no function. This will simplify the code for speeding up the tests in the following commits. Signed-off-by:
-
Magnus Karlsson authored
Replace our own homegrown assembly store/release and load/acquire implementations with the HW agnositic atomic APIs C11 offers. This to make the code more portable, easier to read, and reduce the maintenance burden. The original code used load-acquire and store-release barriers hand-coded in assembly. Since C11, these kind of operations are offered as built-ins in gcc and llvm. The load-acquire operation prevents hoisting of non-atomic memory operations to before this operation and it corresponds to the __ATOMIC_ACQUIRE operation in the built-in atomics. The store-release operation prevents hoisting of non-atomic memory operations to after this operation and it corresponds to the __ATOMIC_RELEASE operation in the built-in atomics. Signed-off-by:
-
Magnus Karlsson authored
Add a new option to the test_xsk.sh script that only creates the two veth netdevs and the extra namespace, then exits without running any tests. The failed test can then be executed in the debugger without having to create the netdevs and namespace manually. For ease-of-use, the veth netdevs to use are printed so they can be copied into the debugger. Here is an example how to use it: > sudo ./test_xsk.sh -d veth10 veth11 > gdb xskxceiver In gdb: run -i veth10 -i veth11 And now the test cases can be debugged with gdb. If you want to debug the test suite on a real NIC in loopback mode, there is no need to use this feature as you already know the netdev of your NIC. Signed-off-by:
-
Magnus Karlsson authored
Remove the unused variable outstanding_tx. Signed-off-by:
-
Magnus Karlsson authored
Print the correct error codes when exiting the test suite due to some terminal error. Some of these had a switched sign and some of them printed zero instead of errno. Fixes: facb7cb2 ("selftests/bpf: Xsk selftests - SKB POLL, NOPOLL") Signed-off-by:
-
Magnus Karlsson authored
Submit the correct number of frames in the function xsk_populate_fill_ring(). For the tests that set the flag use_addr_for_fill, uninitialized buffers were sent to the fill ring following the correct ones. This has no impact on the tests, since they only use the ones that were initialized. But for correctness, this should be fixed. Signed-off-by:
-
Magnus Karlsson authored
Do not close descriptors that have never been used. File descriptor fields that are not in use are erroneously marked with the number 0, which is a valid fd. Mark unused fds with -1 instead and do not close these when deleting the socket. Signed-off-by:
-
Magnus Karlsson authored
Print the correct payload when the packet dump option is selected. The network to host conversion was forgotten and the payload was erronously declared to be an int instead of an unsigned int. Fixes: facb7cb2 ("selftests/bpf: Xsk selftests - SKB POLL, NOPOLL") Signed-off-by:
-
Michal Suchanek authored
The ability to subscript match result as an array is only available since python 3.6. Existing code in bpf_doc uses the older group() interface but commit 8a76145a adds code using the new interface. Use the old interface consistently to avoid build error on older distributions like the below: + make -j48 -s -C /dev/shm/kbuild/linux.33946/current ARCH=powerpc HOSTCC=gcc CROSS_COMPILE=powerpc64-suse-linux- clean TypeError: '_sre.SRE_Match' object is not subscriptable Fixes: 8a76145a ("bpf: explicitly define BPF_FUNC_xxx integer values") Signed-off-by:
Michal Suchanek <msuchanek@suse.de> Signed-off-by:
-
- 11 Jan, 2023 2 commits
-
-
Ludovic L'Hours authored
As BPF_F_MMAPABLE flag is now conditionnaly set (by map_is_mmapable), it should not be toggled but disabled if not supported by kernel. Fixes: 4fcac46c ("libbpf: only add BPF_F_MMAPABLE flag for data maps with global vars") Signed-off-by:
Ludovic L'Hours <ludovic.lhours@gmail.com> Acked-by:
-
Chethan Suresh authored
When bpftool feature does not find kernel config files under default path or wrong format, do not output CONFIG_XYZ is not set. Skip kernel config check and continue. Signed-off-by:
Chethan Suresh <chethan.suresh@sony.com> Signed-off-by:
Kenta Tada <Kenta.Tada@sony.com> Acked-by:
-
- 10 Jan, 2023 2 commits
-
-
Connor O'Brien authored
Enabling CONFIG_MODULE_ALLOW_BTF_MISMATCH is an indication that BTF mismatches are expected and module loading should proceed anyway. Logging with pr_warn() on every one of these "benign" mismatches creates unnecessary noise when many such modules are loaded. Instead, handle this case with a single log warning that BTF info may be unavailable. Mismatches also result in calls to __btf_verifier_log() via __btf_verifier_log_type() or btf_verifier_log_member(), adding several additional lines of logging per mismatched module. Add checks to these paths to skip logging for module BTF mismatches in the "allow mismatch" case. All existing logging behavior is preserved in the default CONFIG_MODULE_ALLOW_BTF_MISMATCH=n case. Signed-off-by:
Connor O'Brien <connoro@google.com> Acked-by:
-
Pu Lehui authored
Extra_nregs of structure parameters and nr_args can be added directly at the beginning, and using a flip flag to identifiy structure parameters. Meantime, renaming some variables to make them more sense. Signed-off-by:
Pu Lehui <pulehui@huawei.com> Acked-by:
-
