- 17 Aug, 2015 8 commits
-
-
Florian Fainelli authored
commit 247bfb65 upstream. This reverts commit 3cf29543 ("MIPS: BCM63xx: Provide a plat_post_dma_flush hook") since this commit was found to prevent BCM6358 (early BMIPS4350 cores) and some BCM6368 (BMIPS4380 cores) from booting reliably. Alvaro was able to track this down to an issue specifically located to devices that use the second thread (TP1) when booting. Since BCM63xx did not have a need for plat_post_dma_flush() hook before, let's just keep things the way they were. Reported-by:
Álvaro Fernández Rojas <noltari@gmail.com> Reported-by:
Jonas Gorski <jogo@openwrt.org> Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Nicolas Schichan <nschichan@freebox.fr> Cc: linux-mips@linux-mips.org Cc: blogic@openwrt.org Cc: noltari@gmail.com Cc: jogo@openwrt.org Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: stable@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10804/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
James Hogan authored
commit 1e77863a upstream. The show_stack() function deals exclusively with kernel contexts, but if it gets called in user context with EVA enabled, show_stacktrace() will attempt to access the stack using EVA accesses, which will either read other user mapped data, or more likely cause an exception which will be handled by __get_user(). This is easily reproduced using SysRq t to show all task states, which results in the following stack dump output: Stack : (Bad stack address) Fix by setting the current user access mode to kernel around the call to show_stacktrace(). This causes __get_user() to use normal loads to read the kernel stack. Now we get the correct output, like this: Stack : 00000000 80168960 00000000 004a0000 00000000 00000000 8060016c 1f3abd0c 1f172cd8 8056f09c 7ff1e450 8014fc3c 00000001 806dd0b0 0000001d 00000002 1f17c6a0 1f17c804 1f17c6a0 8066f6e0 00000000 0000000a 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 0110e800 1f3abd6c 1f17c6a0 ... Signed-off-by:
James Hogan <james.hogan@imgtec.com> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: Leonid Yegoshin <leonid.yegoshin@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10778/Signed-off-by:
-
James Hogan authored
commit 55c723e1 upstream. If a machine check exception is raised in kernel mode, user context, with EVA enabled, then the do_mcheck handler will attempt to read the code around the EPC using EVA load instructions, i.e. as if the reads were from user mode. This will either read random user data if the process has anything mapped at the same address, or it will cause an exception which is handled by __get_user, resulting in this output: Code: (Bad address in epc) Fix by setting the current user access mode to kernel if the saved register context indicates the exception was taken in kernel mode. This causes __get_user to use normal loads to read the kernel code. Signed-off-by:
-
Felix Fietkau authored
commit 0cb0985f upstream. get_c0_perfcount_int is tested from oprofile code. If oprofile is compiled as module, get_c0_perfcount_int needs to be exported, otherwise it cannot be resolved. Fixes: a669efc4 ("MIPS: Add hook to get C0 performance counter interrupt") Signed-off-by:
Felix Fietkau <nbd@openwrt.org> Cc: linux-mips@linux-mips.org Cc: abrestic@chromium.org Patchwork: https://patchwork.linux-mips.org/patch/10763/Signed-off-by:
-
Felix Fietkau authored
commit 1d62d737 upstream. p->thread.user_cpus_allowed is zero-initialized and is only filled on the first sched_setaffinity call. To avoid adding overhead in the task initialization codepath, simply OR the returned mask in sched_getaffinity with p->cpus_allowed. Signed-off-by:
-
James Hogan authored
commit 106eccb4 upstream. On Malta, since commit a87ea88d ("MIPS: Malta: initialise the RTC at boot"), the RTC is reinitialised and forced into binary coded decimal (BCD) mode during init, even if the bootloader has already initialised it, and may even have already put it into binary mode (as YAMON does). This corrupts the current time, can result in the RTC seconds being an invalid BCD (e.g. 0x1a..0x1f) for up to 6 seconds, as well as confusing YAMON for a while after reset, enough for it to report timeouts when attempting to load from TFTP (it actually uses the RTC in that code). Therefore only initialise the RTC to the extent that is necessary so that Linux avoids interfering with the bootloader setup, while also allowing it to estimate the CPU frequency without hanging, without a bootloader necessarily having done anything with the RTC (for example when the kernel is loaded via EJTAG). The divider control is configured for a 32KHZ reference clock if necessary, and the SET bit of the RTC_CONTROL register is cleared if necessary without changing any other bits (this bit will be set when coming out of reset if the battery has been disconnected). Fixes: a87ea88d ("MIPS: Malta: initialise the RTC at boot") Signed-off-by:
Paul Burton <paul.burton@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10739/Signed-off-by:
-
James Cowgill authored
commit a4504755 upstream. Fixes the assembler errors generated when compiling a MIPS R6 kernel with CONFIG_KEXEC on, by replacing the offending add and sub instructions with addiu instructions. Build errors: arch/mips/kernel/relocate_kernel.S: Assembler messages: arch/mips/kernel/relocate_kernel.S:27: Error: invalid operands `dadd $16,$16,8' arch/mips/kernel/relocate_kernel.S:64: Error: invalid operands `dadd $20,$20,8' arch/mips/kernel/relocate_kernel.S:65: Error: invalid operands `dadd $18,$18,8' arch/mips/kernel/relocate_kernel.S:66: Error: invalid operands `dsub $22,$22,1' scripts/Makefile.build:294: recipe for target 'arch/mips/kernel/relocate_kernel.o' failed Signed-off-by:
James Cowgill <James.Cowgill@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10558/Signed-off-by:
-
James Cowgill authored
commit 531a6d59 upstream. Commit eeb53895 ("MIPS: unaligned: Prevent EVA instructions on kernel unaligned accesses") renamed the Load* and Store* defines in unaligned.c to _Load* and _Store* as part of its fix. One define was missed out which causes big endian R6 kernels to fail to build. arch/mips/kernel/unaligned.c:880:35: error: implicit declaration of function '_StoreDW' #define StoreDW(addr, value, res) _StoreDW(addr, value, res) ^ Signed-off-by:
-
- 10 Aug, 2015 32 commits
-
-
Greg Kroah-Hartman authored
-
Arnaldo Carvalho de Melo authored
commit 0bc2f2f7 upstream. When setting yup the symbols library we setup several filter lists, for dsos, comms, symbols, etc, and there is code that, if there are filters, do certain operations, like recalculate the number of non filtered histogram entries in the top/report TUI. But they were considering just the "Zoom" filters, when they need to take into account as well the above mentioned filters (perf top --comms, --dsos, etc). So store in symbol_conf.has_filter true if any of those filters is in place. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-f5edfmhq69vfvs1kmikq1wep@git.kernel.orgSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andre Tomt <lkml@tomt.net> Signed-off-by:
-
Dave Chinner authored
commit df150ed1 upstream. We don't log remote attribute contents, and instead write them synchronously before we commit the block allocation and attribute tree update transaction. As a result we are writing to the allocated space before the allcoation has been made permanent. As a result, we cannot consider this allocation to be a metadata allocation. Metadata allocation can take blocks from the free list and so reuse them before the transaction that freed the block is committed to disk. This behaviour is perfectly fine for journalled metadata changes as log recovery will ensure the free operation is replayed before the overwrite, but for remote attribute writes this is not the case. Hence we have to consider the remote attribute blocks to contain data and allocate accordingly. We do this by dropping the XFS_BMAPI_METADATA flag from the block allocation. This means the allocation will not use blocks that are on the busy list without first ensuring that the freeing transaction has been committed to disk and the blocks removed from the busy list. This ensures we will never overwrite a freed block without first ensuring that it is really free. Signed-off-by:
Dave Chinner <dchinner@redhat.com> Reviewed-by:
Brian Foster <bfoster@redhat.com> Signed-off-by:
Dave Chinner <david@fromorbit.com> Signed-off-by:
-
Dave Chinner authored
commit e3c32ee9 upstream. In recent testing, a system that crashed failed log recovery on restart with a bad symlink buffer magic number: XFS (vda): Starting recovery (logdev: internal) XFS (vda): Bad symlink block magic! XFS: Assertion failed: 0, file: fs/xfs/xfs_log_recover.c, line: 2060 On examination of the log via xfs_logprint, none of the symlink buffers in the log had a bad magic number, nor were any other types of buffer log format headers mis-identified as symlink buffers. Tracing was used to find the buffer the kernel was tripping over, and xfs_db identified it's contents as: 000: 5841524d 00000000 00000346 64d82b48 8983e692 d71e4680 a5f49e2c b317576e 020: 00000000 00602038 00000000 006034ce d0020000 00000000 4d4d4d4d 4d4d4d4d 040: 4d4d4d4d 4d4d4d4d 4d4d4d4d 4d4d4d4d 4d4d4d4d 4d4d4d4d 4d4d4d4d 4d4d4d4d 060: 4d4d4d4d 4d4d4d4d 4d4d4d4d 4d4d4d4d 4d4d4d4d 4d4d4d4d 4d4d4d4d 4d4d4d4d ..... This is a remote attribute buffer, which are notable in that they are not logged but are instead written synchronously by the remote attribute code so that they exist on disk before the attribute transactions are committed to the journal. The above remote attribute block has an invalid LSN in it - cycle 0xd002000, block 0 - which means when log recovery comes along to determine if the transaction that writes to the underlying block should be replayed, it sees a block that has a future LSN and so does not replay the buffer data in the transaction. Instead, it validates the buffer magic number and attaches the buffer verifier to it. It is this buffer magic number check that is failing in the above assert, indicating that we skipped replay due to the LSN of the underlying buffer. The problem here is that the remote attribute buffers cannot have a valid LSN placed into them, because the transaction that contains the attribute tree pointer changes and the block allocation that the attribute data is being written to hasn't yet been committed. Hence the LSN field in the attribute block is completely unwritten, thereby leaving the underlying contents of the block in the LSN field. It could have any value, and hence a future overwrite of the block by log recovery may or may not work correctly. Fix this by always writing an invalid LSN to the remote attribute block, as any buffer in log recovery that needs to write over the remote attribute should occur. We are protected from having old data written over the attribute by the fact that freeing the block before the remote attribute is written will result in the buffer being marked stale in the log and so all changes prior to the buffer stale transaction will be cancelled by log recovery. Hence it is safe to ignore the LSN in the case or synchronously written, unlogged metadata such as remote attribute blocks, and to ensure we do that correctly, we need to write an invalid LSN to all remote attribute blocks to trigger immediate recovery of metadata that is written over the top. As a further protection for filesystems that may already have remote attribute blocks with bad LSNs on disk, change the log recovery code to always trigger immediate recovery of metadata over remote attribute blocks. Signed-off-by:
-
Kamil Dudka authored
commit 7512223b upstream. This fixes the list_del corruption reported at <https://bugzilla.redhat.com/1205985>. Signed-off-by:
Kamil Dudka <kdudka@redhat.com> Signed-off-by:
-
Kamil Dudka authored
commit ac8c7930 upstream. This was the only access to cli->abi16 without holding the mutex. Signed-off-by:
-
Ben Skeggs authored
commit 697bb728 upstream. Userspace has started doing this, which upsets the display class hw error checking in various unpleasant ways. Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
-
Ilia Mirkin authored
commit d108142c upstream. The RING_SPACE macro accounts how much space is used up so it's important to ask it for the right amount. Incorrect accounting of this can cause page faults down the line as writes are attempted outside of the ring. Signed-off-by:
Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by:
-
Roland Dreier authored
commit b2032fd5 upstream. To fix some issues talking to ESX, this patch modifies the qla2xxx driver so that it never logs into remote ports. This has the side effect of getting rid of the "rports" entirely, which means we never log out of initiators and never tear down sessions when an initiator goes away. This is mostly OK, except that we can run into trouble if we have initiator A assigned FC address X:Y:Z by the fabric talking to us, and then initiator A goes away. Some time (could be a long time) later, initiator B comes along and also gets FC address X:Y:Z (which is available again, because initiator A is gone). If initiator B starts talking to us, then we'll still have the session for initiator A, and since we look up incoming IO based on the FC address X:Y:Z, initiator B will end up using ACLs for initiator A. Fix this by: 1. Handling RSCN events somewhat differently; instead of completely skipping the processing of fcports, we look through the list, and if an fcport disappears, we tell the target code the tear down the session and tell the HBA FW to release the N_Port handle. 2. Handling "port down" events by flushing all of our sessions. The firmware was already releasing the N_Port handle but we want the target code to drop all the sessions too. Signed-off-by:
Roland Dreier <roland@purestorage.com> Signed-off-by:
Alexei Potashnik <alexei@purestorage.com> Acked-by:
Quinn Tran <quinn.tran@qlogic.com> Signed-off-by:
Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
-
Kanoj Sarcar authored
commit 9fce1254 upstream. Signed-off-by:
Kanoj Sarcar <kanoj.sarcar@qlogic.com> Signed-off-by:
-
Himanshu Madhani authored
commit 6bc85dd5 upstream. Remove unnecessary msleep from qlt_send_term_exchange as it adds latency of 250 msec while sending terminate exchange to an aborted task. Signed-off-by:
Giridhar Malavali <giridhar.malavali@qlogic.com> Reviewed-by:
-
Quinn Tran authored
commit 810e30bc upstream. Request IOCB queue element(s) is reserved during good path IO. Under error condition such as unable to allocate IOCB handle condition, the IOCB count that was reserved is not released. Signed-off-by:
-
Saurav Kashyap authored
commit ba9f6f64 upstream. [ Upstream commit ef86cb20 ] This patch fixes a kernel panic for qla2xxx Target core Module driver introduced by a fix in the qla2xxx initiator code. Commit ef86cb20 ("qla2xxx: Mark port lost when we receive an RSCN for it.") introduced the regression for qla2xxx Target driver. Stack trace will have following signature --- <NMI exception stack> --- [ffff88081faa3cc8] _raw_spin_lock_irqsave at ffffffff815b1f03 [ffff88081faa3cd0] qlt_fc_port_deleted at ffffffffa096ccd0 [qla2xxx] [ffff88081faa3d20] qla2x00_schedule_rport_del at ffffffffa0913831[qla2xxx] [ffff88081faa3d50] qla2x00_mark_device_lost at ffffffffa09159c5[qla2xxx] [ffff88081faa3db0] qla2x00_async_event at ffffffffa0938d59 [qla2xxx] [ffff88081faa3e30] qla24xx_msix_default at ffffffffa093a326 [qla2xxx] [ffff88081faa3e90] handle_irq_event_percpu at ffffffff810a7b8d [ffff88081faa3ee0] handle_irq_event at ffffffff810a7d32 [ffff88081faa3f10] handle_edge_irq at ffffffff810ab6b9 [ffff88081faa3f30] handle_irq at ffffffff8100619c [ffff88081faa3f70] do_IRQ at ffffffff815b4b1c --- <IRQ stack> --- Signed-off-by:
Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by:
-
Lukasz Anaczkowski authored
commit 69cefc27 upstream. Scaling for Knights Landing is same as the default scaling (100000). When Knigts Landing support was added to the pstate driver, this parameter was omitted resulting in a kernel panic during boot. Fixes: b34ef932 (intel_pstate: Knights Landing support) Reported-by:
Yasuaki Ishimatsu <yishimat@redhat.com> Signed-off-by:
Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com> Signed-off-by:
Lukasz Anaczkowski <lukasz.anaczkowski@intel.com> Acked-by:
Kristen Carlson Accardi <kristen@linux.intel.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Nicholas Bellinger authored
commit 007d038b upstream. This patch fixes a regression introduced with the following commit in v4.0-rc1 code, where an explicit iser-target logout would result in ->tx_thread_active being incorrectly cleared by the logout post handler, and subsequent TX kthread leak: commit 88dcd2da Author: Nicholas Bellinger <nab@linux-iscsi.org> Date: Thu Feb 26 22:19:15 2015 -0800 iscsi-target: Convert iscsi_thread_set usage to kthread.h To address this bug, change iscsit_logout_post_handler_closesession() and iscsit_logout_post_handler_samecid() to only cmpxchg() on ->tx_thread_active for traditional iscsi/tcp connections. This is required because iscsi/tcp connections are invoking logout post handler logic directly from TX kthread context, while iser connections are invoking logout post handler logic from a seperate workqueue context. Cc: Sagi Grimberg <sagig@mellanox.com> Signed-off-by:
-
Nicholas Bellinger authored
commit e5419865 upstream. This patch fixes a regression introduced with the following commit in v4.0-rc1 code, where a iscsit_start_kthreads() failure triggers a NULL pointer dereference OOPs: commit 88dcd2da Author: Nicholas Bellinger <nab@linux-iscsi.org> Date: Thu Feb 26 22:19:15 2015 -0800 iscsi-target: Convert iscsi_thread_set usage to kthread.h To address this bug, move iscsit_start_kthreads() immediately preceeding the transmit of last login response, before signaling a successful transition into full-feature-phase within existing iscsi_target_do_tx_login_io() logic. This ensures that no target-side resource allocation failures can occur after the final login response has been successfully sent. Also, it adds a iscsi_conn->rx_login_comp to allow the RX thread to sleep to prevent other socket related failures until the final iscsi_post_login_handler() call is able to complete. Cc: Sagi Grimberg <sagig@mellanox.com> Signed-off-by:
-
Nicholas Bellinger authored
commit 417c20a9 upstream. This patch fixes a use-after-free bug in iscsit_release_sessions_for_tpg() where se_portal_group->session_lock was incorrectly released/re-acquired while walking the active se_portal_group->tpg_sess_list. The can result in a NULL pointer dereference when iscsit_close_session() shutdown happens in the normal path asynchronously to this code, causing a bogus dereference of an already freed list entry to occur. To address this bug, walk the session list checking for the same state as before, but move entries to a local list to avoid dropping the lock while walking the active list. As before, signal using iscsi_session->session_restatement=1 for those list entries to be released locally by iscsit_free_session() code. Reported-by:
Sunilkumar Nadumuttlu <sjn@datera.io> Cc: Sunilkumar Nadumuttlu <sjn@datera.io> Signed-off-by:
-
Jason Gunthorpe authored
commit efc1eedb upstream. If the above is turned off then ipoib_cm_dev_init unconditionally returns ENOSYS, and the newly added error handling in 0b3957 prevents ipoib from coming up at all: kernel: mlx4_0: ipoib_transport_dev_init failed kernel: mlx4_0: failed to initialize port 1 (ret = -12) Fixes: 0b39578b (IB/ipoib: Use dedicated workqueues per interface) Signed-off-by:
Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
Trond Myklebust authored
commit 03d5eb65 upstream. If the function exits early, then we must put those requests that were not processed back onto the &mirror->pg_list so they can be cleaned up by nfs_pgio_error(). Fixes: a7d42ddb ("nfs: add mirroring support to pgio layer") Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
-
Trond Myklebust authored
commit 3c38cbe2 upstream. Otherwise, nfs4_select_rw_stateid() will always return the zero stateid instead of the correct open stateid. Fixes: f95549cf ("NFSv4: More CLOSE/OPEN races") Signed-off-by:
-
Andy Shevchenko authored
commit 5c02a420 upstream. Since NULL is used as valid clock object on optional clocks we have to handle this case in avr32 implementation as well. Fixes: e1824dfe (net: macb: Adjust tx_clk when link speed changes) Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by:
Hans-Christian Egtvedt <egtvedt@samfundet.no> Signed-off-by:
-
Trond Myklebust authored
commit 85a23cee upstream. If we've ensured that the size and the change attribute are both correct, then there is no point in marking those attributes as needing revalidation again. Only do so if we know the size is incorrect and was not updated. Fixes: f2467b6f ("NFS: Clear NFS_INO_REVAL_PAGECACHE when...") Signed-off-by:
-
Guenter Roeck authored
commit 0d6aaffc upstream. pwm attributes have well defined names, which should be used. Cc: Vadim V. Vlasov <vvlasov@dev.rtsoft.ru> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Guenter Roeck authored
commit 9200bc4c upstream. Writing a large value into a voltage limit attribute can result in an overflow due to an auto-conversion from unsigned long to unsigned int. Cc: Constantine Shulyupin <const@MakeLinux.com> Reviewed-by:
Jean Delvare <jdelvare@suse.de> Signed-off-by:
-
Marc-André Lureau authored
commit 7932c0bd upstream. While reviewing vhost log code, I found out that log_file is never set. Note: I haven't tested the change (QEMU doesn't use LOG_FD yet). Signed-off-by:
Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
Matt Fleming authored
commit 2c534c0d upstream. Peter reported the following potential crash which I was able to reproduce with his test program, [ 148.765788] ------------[ cut here ]------------ [ 148.765796] WARNING: CPU: 34 PID: 2840 at kernel/smp.c:417 smp_call_function_many+0xb6/0x260() [ 148.765797] Modules linked in: [ 148.765800] CPU: 34 PID: 2840 Comm: perf Not tainted 4.2.0-rc1+ #4 [ 148.765803] ffffffff81cdc398 ffff88085f105950 ffffffff818bdfd5 0000000000000007 [ 148.765805] 0000000000000000 ffff88085f105990 ffffffff810e413a 0000000000000000 [ 148.765807] ffffffff82301080 0000000000000022 ffffffff8107f640 ffffffff8107f640 [ 148.765809] Call Trace: [ 148.765810] <NMI> [<ffffffff818bdfd5>] dump_stack+0x45/0x57 [ 148.765818] [<ffffffff810e413a>] warn_slowpath_common+0x8a/0xc0 [ 148.765822] [<ffffffff8107f640>] ? intel_cqm_stable+0x60/0x60 [ 148.765824] [<ffffffff8107f640>] ? intel_cqm_stable+0x60/0x60 [ 148.765825] [<ffffffff810e422a>] warn_slowpath_null+0x1a/0x20 [ 148.765827] [<ffffffff811613f6>] smp_call_function_many+0xb6/0x260 [ 148.765829] [<ffffffff8107f640>] ? intel_cqm_stable+0x60/0x60 [ 148.765831] [<ffffffff81161748>] on_each_cpu_mask+0x28/0x60 [ 148.765832] [<ffffffff8107f6ef>] intel_cqm_event_count+0x7f/0xe0 [ 148.765836] [<ffffffff811cdd35>] perf_output_read+0x2a5/0x400 [ 148.765839] [<ffffffff811d2e5a>] perf_output_sample+0x31a/0x590 [ 148.765840] [<ffffffff811d333d>] ? perf_prepare_sample+0x26d/0x380 [ 148.765841] [<ffffffff811d3497>] perf_event_output+0x47/0x60 [ 148.765843] [<ffffffff811d36c5>] __perf_event_overflow+0x215/0x240 [ 148.765844] [<ffffffff811d4124>] perf_event_overflow+0x14/0x20 [ 148.765847] [<ffffffff8107e7f4>] intel_pmu_handle_irq+0x1d4/0x440 [ 148.765849] [<ffffffff811d07a6>] ? __perf_event_task_sched_in+0x36/0xa0 [ 148.765853] [<ffffffff81219bad>] ? vunmap_page_range+0x19d/0x2f0 [ 148.765854] [<ffffffff81219d11>] ? unmap_kernel_range_noflush+0x11/0x20 [ 148.765859] [<ffffffff814ce6fe>] ? ghes_copy_tofrom_phys+0x11e/0x2a0 [ 148.765863] [<ffffffff8109e5db>] ? native_apic_msr_write+0x2b/0x30 [ 148.765865] [<ffffffff8109e44d>] ? x2apic_send_IPI_self+0x1d/0x20 [ 148.765869] [<ffffffff81065135>] ? arch_irq_work_raise+0x35/0x40 [ 148.765872] [<ffffffff811c8d86>] ? irq_work_queue+0x66/0x80 [ 148.765875] [<ffffffff81075306>] perf_event_nmi_handler+0x26/0x40 [ 148.765877] [<ffffffff81063ed9>] nmi_handle+0x79/0x100 [ 148.765879] [<ffffffff81064422>] default_do_nmi+0x42/0x100 [ 148.765880] [<ffffffff81064563>] do_nmi+0x83/0xb0 [ 148.765884] [<ffffffff818c7c0f>] end_repeat_nmi+0x1e/0x2e [ 148.765886] [<ffffffff811d07a6>] ? __perf_event_task_sched_in+0x36/0xa0 [ 148.765888] [<ffffffff811d07a6>] ? __perf_event_task_sched_in+0x36/0xa0 [ 148.765890] [<ffffffff811d07a6>] ? __perf_event_task_sched_in+0x36/0xa0 [ 148.765891] <<EOE>> [<ffffffff8110ab66>] finish_task_switch+0x156/0x210 [ 148.765898] [<ffffffff818c1671>] __schedule+0x341/0x920 [ 148.765899] [<ffffffff818c1c87>] schedule+0x37/0x80 [ 148.765903] [<ffffffff810ae1af>] ? do_page_fault+0x2f/0x80 [ 148.765905] [<ffffffff818c1f4a>] schedule_user+0x1a/0x50 [ 148.765907] [<ffffffff818c666c>] retint_careful+0x14/0x32 [ 148.765908] ---[ end trace e33ff2be78e14901 ]--- The CQM task events are not safe to be called from within interrupt context because they require performing an IPI to read the counter value on all sockets. And performing IPIs from within IRQ context is a "no-no". Make do with the last read counter value currently event in event->count when we're invoked in this context. Reported-by:
Peter Zijlstra <peterz@infradead.org> Signed-off-by:
Matt Fleming <matt.fleming@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vikas Shivappa <vikas.shivappa@intel.com> Cc: Kanaka Juvva <kanaka.d.juvva@intel.com> Cc: Will Auld <will.auld@intel.com> Link: http://lkml.kernel.org/r/1437490509-15373-1-git-send-email-matt@codeblueprint.co.ukSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Arnaldo Carvalho de Melo authored
commit 9c0fa8dd upstream. At some point: commit 2c86c7ca Author: Namhyung Kim <namhyung@kernel.org> Date: Mon Mar 17 18:18:54 2014 -0300 perf report: Merge al->filtered with hist_entry->filtered We stopped dropping samples for things filtered via the --comms, --dsos, --symbols, etc, i.e. things marked as filtered in the symbol resolution routines (thread__find_addr_map(), perf_event__preprocess_sample(), etc). But then, in: commit 268397cb Author: Namhyung Kim <namhyung@kernel.org> Date: Tue Apr 22 14:49:31 2014 +0900 perf top/tui: Update nr_entries properly after a filter is applied We don't take into account entries that were filtered in perf_event__preprocess_sample() and friends, which leads to inconsistency in the browser seek routines, that expects the number of hist_entry->filtered entries to match what it thinks is the number of unfiltered, browsable entries. So, for instance, when we do: perf top --symbols ___non_existent_symbol___ the hist_browser__nr_entries() routine thinks there are no filters in place, uses the hists->nr_entries but all entries are filtered, leading to a segfault. Tested with: perf top --symbols malloc,free --percentage=relative Freezing, by pressing 'f', at any time and doing the math on the percentages ends up with 100%, ditto for: perf top --dsos libpthread-2.20.so,libxul.so --percentage=relative Both were segfaulting, all fixed now. More work needed to do away with checking if filters are in place, we should just use the nr_non_filtered_samples counter, no need to conditionally use it or hists.nr_filter, as what the browser does is just show unfiltered stuff. An audit of how it is being accounted is needed, this is the minimal fix. Reported-by:
Michael Petlan <mpetlan@redhat.com> Fixes: 268397cb ("perf top/tui: Update nr_entries properly after a filter is applied") Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-6w01d5q97qk0d64kuojme5in@git.kernel.orgSigned-off-by:
-
Ming Lei authored
commit e56f698b upstream. It is reasonable to set default timeout of request as 30 seconds instead of 30000 ticks, which may be 300 seconds if HZ is 100, for example, some arm64 based systems may choose 100 HZ. Signed-off-by:
Ming Lei <ming.lei@canonical.com> Fixes: c76cbbcf ("blk-mq: put blk_queue_rq_timeout together in blk_mq_init_queue()" Signed-off-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
-
Peter Hurley authored
commit 3b19e032 upstream. When handling signalling char, claim the termios write lock before signalling waiting readers and writers to prevent further i/o before flushing the echo and output buffers. This prevents a userspace signal handler which may output from racing the terminal flush. Reference: Bugzilla #99351 ("Output truncated in ssh session after...") Fixes: commit d2b6f447 ("n_tty: Fix signal handling flushes") Reported-by:
Filipe Brandenburger <filbranden@google.com> Signed-off-by:
Peter Hurley <peter@hurleysoftware.com> Signed-off-by:
-
Wengang Wang authored
commit 4fabb594 upstream. Fixes: 3e0249f9 ("RDS/IB: add refcount tracking to struct rds_ib_device") There lacks a dropping on rds_ib_device.refcount in case rds_ib_alloc_fmr failed(mr pool running out). this lead to the refcount overflow. A complain in line 117(see following) is seen. From vmcore: s_ib_rdma_mr_pool_depleted is 2147485544 and rds_ibdev->refcount is -2147475448. That is the evidence the mr pool is used up. so rds_ib_alloc_fmr is very likely to return ERR_PTR(-EAGAIN). 115 void rds_ib_dev_put(struct rds_ib_device *rds_ibdev) 116 { 117 BUG_ON(atomic_read(&rds_ibdev->refcount) <= 0); 118 if (atomic_dec_and_test(&rds_ibdev->refcount)) 119 queue_work(rds_wq, &rds_ibdev->free_work); 120 } fix is to drop refcount when rds_ib_alloc_fmr failed. Signed-off-by:
Wengang Wang <wen.gang.wang@oracle.com> Reviewed-by:
Haggai Eran <haggaie@mellanox.com> Signed-off-by:
-
Vineet Gupta authored
commit 80f42084 upstream. ARCompact/ARCv2 ISA provide that any instructions which deals with bitpos/count operand ASL, LSL, BSET, BCLR, BMSK .... will only consider lower 5 bits. i.e. auto-clamp the pos to 0-31. ARC Linux bitops exploited this fact by NOT explicitly masking out upper bits for @nr operand in general, saving a bunch of AND/BMSK instructions in generated code around bitops. While this micro-optimization has worked well over years it is NOT safe as shifting a number with a value, greater than native size is "undefined" per "C" spec. So as it turns outm EZChip ran into this eventually, in their massive muti-core SMP build with 64 cpus. There was a test_bit() inside a loop from 63 to 0 and gcc was weirdly optimizing away the first iteration (so it was really adhering to standard by implementing undefined behaviour vs. removing all the iterations which were phony i.e. (1 << [63..32]) | for i = 63 to 0 | X = ( 1 << i ) | if X == 0 | continue So fix the code to do the explicit masking at the expense of generating additional instructions. Fortunately, this can be mitigated to a large extent as gcc has SHIFT_COUNT_TRUNCATED which allows combiner to fold masking into shift operation itself. It is currently not enabled in ARC gcc backend, but could be done after a bit of testing. Fixes STAR 9000866918 ("unsafe "undefined behavior" code in kernel") Reported-by:
Noam Camus <noamc@ezchip.com> Signed-off-by:
Vineet Gupta <vgupta@synopsys.com> Signed-off-by:
-
Vineet Gupta authored
commit 04e2eee4 upstream. No semantical changes ! Acked-by:
-
