- 16 Mar, 2022 28 commits
-
-
Shayne Chen authored
Set proper group index of tx descriptor for band1. Signed-off-by:
Shayne Chen <shayne.chen@mediatek.com> Signed-off-by:
Felix Fietkau <nbd@nbd.name>
-
Deren Wu authored
Drop invalid rssi value to calculate a reasonable report Fixes: 4550fb9e ("mt76: improve signal strength reporting") Signed-off-by:
Deren Wu <deren.wu@mediatek.com> Signed-off-by:
-
Ryder Lee authored
Switch to use le32/16_get_bits() to simplfy codes and specify the size explicitly to avoid potential issues. Signed-off-by:
Ryder Lee <ryder.lee@mediatek.com> Signed-off-by:
-
Colin Ian King authored
Don't populate the read-only array ba_range on the stack but instead make it static const. Also makes the object code a little smaller. Signed-off-by:
Colin Ian King <colin.i.king@gmail.com> Signed-off-by:
-
Dan Carpenter authored
If devm_pinctrl_get() fails then it leads to an error pointer dereference. Add a check to prevent that. Fixes: 99ad32a4 ("mt76: mt7915: add support for MT7986") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Lorenzo Bianconi authored
mt7921_wait_for_mcu_init is no longer used. Signed-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by:
-
Shayne Chen authored
Add support to init txpower values of 6GHz band. Signed-off-by:
MeiChia Chiu <MeiChia.Chiu@mediatek.com> Signed-off-by:
-
Shayne Chen authored
A-die 7976 has different offset and uses different channel group definition on txpower init values. Fixes: 99ad32a4 ("mt76: mt7915: add support for MT7986") Signed-off-by:
-
MeiChia Chiu authored
Basic 6 GHz support is added to mt76. Modification includes: 1. Add 6 GHz E2P definition 2. Register 6 GHz HE cap 3. Refactor existing code of adding a STA This adds support for Wi-Fi 6E on MT7986/MT7916. Detailed link: https://www.mediatek.com/products/mediatek-filogic-830 Detailed link: https://www.mediatek.com/products/products/broadband-wifi/mediatek-filogic-630Reviewed-by:
Peter Chiu <Chui-Hao.Chiu@mediatek.com> Signed-off-by:
Money Wang <Money.Wang@mediatek.com> Signed-off-by:
-
MeiChia Chiu authored
Since there are no HT & VHT IEs being sent in 6ghz, some capabilities judgement and parsing for wtbl & starec configuration should be modified to reflect such changes. Reviewed-by:
-
Ryder Lee authored
This improves rate reach performance on units with polarized antennas. Signed-off-by:
-
Deren Wu authored
mt7921s driver may receive frames with fragment buffers. If there is a CTS packet received in monitor mode, the payload is 10 bytes only and need 6 bytes header padding after RXD buffer. However, only RXD in the first linear buffer, if we pull buffer size RXD-size+6 bytes with skb_pull(), that would trigger "BUG_ON(skb->len < skb->data_len)" in __skb_pull(). To avoid the nonlinear buffer issue, enlarge the RXD size from 128 to 256 to make sure all MCU operation in linear buffer. [ 52.007562] kernel BUG at include/linux/skbuff.h:2313! [ 52.007578] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 52.007987] pc : skb_pull+0x48/0x4c [ 52.008015] lr : mt7921_queue_rx_skb+0x494/0x890 [mt7921_common] [ 52.008361] Call trace: [ 52.008377] skb_pull+0x48/0x4c [ 52.008400] mt76s_net_worker+0x134/0x1b0 [mt76_sdio 35339a92c6eb7d4bbcc806a1d22f56365565135c] [ 52.008431] __mt76_worker_fn+0xe8/0x170 [mt76 ef716597d11a77150bc07e3fdd68eeb0f9b56917] [ 52.008449] kthread+0x148/0x3ac [ 52.008466] ret_from_fork+0x10/0x30 Signed-off-by:
Sean Wang <sean.wang@mediatek.com> Signed-off-by:
-
Lorenzo Bianconi authored
Fix mt7921_queues_acq implementation according to the vendor sdk. Fixes: 474a9f21 ("mt76: mt7921: add debugfs support") Signed-off-by:
-
Lorenzo Bianconi authored
Use proper xmit queue handler to dump queue stats. Signed-off-by:
-
Lorenzo Bianconi authored
mt7921 is only used in mt7921_dma_init routine. Signed-off-by:
-
MeiChia Chiu authored
The original single LDPC cap bit cannot be used to differentiate LDPC cap in each PHY mode. This modification split the single bit into 3 bits, ht_ldpc, vht_ldpc, and he_ldpc. Reviewed-by:
-
Evelyn Tsai authored
Driver needs to carry region definition when radar detection starts. Need to remap nl80211 DFS regions to chip region definition. Signed-off-by:
Evelyn Tsai <evelyn.tsai@mediatek.com> Signed-off-by:
Rubio Lu <Rubio-DW.Lu@mediatek.com> Signed-off-by:
-
Sean Wang authored
use mt76_hw instead of open coding it Signed-off-by:
-
Sean Wang authored
Properly set up the monitor mode the firmware can support to fix up RTS/CTS and beacon frames cannot be captured and forwarded to the host. Tested-by:
Sven Eckelmann <sven@narfation.org> Signed-off-by:
-
Lorenzo Bianconi authored
Introduce mt7663u_mcu_power_on utility routine since the code is shared between mt7663u_mcu_init() and mt7663u_probe(). Signed-off-by:
-
Lorenzo Bianconi authored
Check return value of mt7615_mcu_restart routine in mt7663u_mcu_init(). Signed-off-by:
-
Ping-Ke Shih authored
smatch reports that: fw.c:1997 rtw89_append_probe_req_ie() error: uninitialized symbol 'ret'. This can be a issue only if no band is supported by the chip, but it is impossible. So, it is still safe without this patch. Signed-off-by:
Ping-Ke Shih <pkshih@realtek.com> Signed-off-by:
Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220311020007.20414-1-pkshih@realtek.com
-
Lukas Bulwahn authored
Commit dae0978d ("dt: bindings: net: add qcom,ath11k.yaml") obviously adds qcom,ath11k.yaml, but the file entry in MAINTAINERS, added with commit fcda1cb8 ("MAINTAINERS: add DT bindings files for ath10k and ath11k") then refers to qcom,ath11k.txt. Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about a broken reference. Repair this file reference in QUALCOMM ATHEROS ATH11K WIRELESS DRIVER, and put it in alphabetic order while at it. Fixes: fcda1cb8 ("MAINTAINERS: add DT bindings files for ath10k and ath11k") Signed-off-by:
Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by:
-
Julia Lawall authored
Various spelling mistakes in comments. Detected with the help of Coccinelle. Signed-off-by:
Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by:
-
Julia Lawall authored
Various spelling mistakes in comments. Detected with the help of Coccinelle. Signed-off-by:
-
Jonathan Teh authored
This is an RTL8188CUS device, identifies as model N150MA-199WWS. Signed-off-by:
Jonathan Teh <jonathan.teh@outlook.com> Acked-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
-
Julia Lawall authored
Use kzalloc instead of kmalloc + memset. The semantic patch that makes this change is: (https://coccinelle.gitlabpages.inria.fr/website/) //<smpl> @@ expression res, size, flag; @@ - res = kmalloc(size, flag); + res = kzalloc(size, flag); ... - memset(res, 0, size); //</smpl> Signed-off-by:
-
Colin Ian King authored
Don't populate the read-only array wmm_oui on the stack but instead make it static const. Also makes the object code a little smaller. Signed-off-by:
-
- 15 Mar, 2022 4 commits
-
-
Lorenzo Bianconi authored
Update bssid_indicator in ieee80211_bss_conf according to the number of bssid in the set. Signed-off-by:
Johannes Berg <johannes.berg@intel.com>
-
John Crispin authored
Trigger ieee80211_csa_finish() on the non-transmitting interfaces when channel switch concludes on the transmitting interface. Co-developed-by:
Aloka Dixit <alokad@codeaurora.org> Signed-off-by:
John Crispin <john@phrozen.org> Link: https://lore.kernel.org/r/6fde4d7f9fa387494f46a7aa4a584478dcda06f1.1645702516.git.lorenzo@kernel.orgSigned-off-by:
-
Lorenzo Bianconi authored
Add new fields in struct beacon_data to store all MBSSID elements. Generate a beacon template which includes all MBSSID elements. Move CSA offset to reflect the MBSSID element length. Co-developed-by:
-
Johannes Berg authored
When CONFIG_PM isn't defined we don't have the function ieee80211_sta_restart() compiled in, but we always need it now for firmware restart. Move it out of the ifdef. Fixes: 7d352ccf ("mac80211: Add support to trigger sta disconnect on hardware restart") Link: https://lore.kernel.org/r/20220312221957.1fa96c72db51.I8ecaa5f9402fede0272161e0531ab930b97fba3e@changeidSigned-off-by:
-
- 13 Mar, 2022 8 commits
-
-
David S. Miller authored
Merge tag 'linux-can-next-for-5.18-20220313' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next linux-can-next-for-5.18-20220313 Marc Kleine-Budde says: ==================== pull-request: can-next 2022-03-13 this is a pull request of 13 patches for net-next/master. The 1st patch is by me and fixes the freeing of a skb in the vxcan driver (initially added in this net-next window). The remaining 12 patches are also by me and target the mcp251xfd driver. The first patch fixes a printf modifier (initially added in this net-next window). The remaining patches add ethtool based ring and RX/TX IRQ coalescing support to the driver. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Marc Kleine-Budde authored
This patch increases the number of RX-FIFOs to 3 and the max TX-FIFO depth to 16. This leads to the following default ring configuration. CAN-2.0 mode: | FIFO setup: TEF: 0x400: 8*12 bytes = 96 bytes | FIFO setup: RX-0: FIFO 1/0x460: 32*20 bytes = 640 bytes | FIFO setup: RX-1: FIFO 2/0x6e0: 32*20 bytes = 640 bytes | FIFO setup: RX-2: FIFO 3/0x960: 16*20 bytes = 320 bytes | FIFO setup: TX: FIFO 4/0xaa0: 8*16 bytes = 128 bytes | FIFO setup: free: 224 bytes CAN-FD mode: | FIFO setup: TEF: 0x400: 4*12 bytes = 48 bytes | FIFO setup: RX-0: FIFO 1/0x430: 16*76 bytes = 1216 bytes | FIFO setup: RX-1: FIFO 2/0x8f0: 4*76 bytes = 304 bytes | FIFO setup: TX: FIFO 3/0xa20: 4*72 bytes = 288 bytes | FIFO setup: free: 192 bytes With the previously added ethtool ring configuration support the RAM on the chip can now be runtime configured between RX and TX buffers. Link: https://lore.kernel.org/20220313083640.501791-13-mkl@pengutronix.deSigned-off-by:
Marc Kleine-Budde <mkl@pengutronix.de>
-
Marc Kleine-Budde authored
This patch adds support ethtool based configuration for the TX IRQ coalescing added in the previous patch. Link: https://lore.kernel.org/20220313083640.501791-12-mkl@pengutronix.deSigned-off-by:
-
Marc Kleine-Budde authored
This patch adds TX IRQ coalescing support to the driver. The implemented algorithm is similar to the RX IRQ coalescing support added in the previous patch. Link: https://lore.kernel.org/20220313083640.501791-11-mkl@pengutronix.deSigned-off-by:
-
Marc Kleine-Budde authored
This patch adds support ethtool based configuration for the RX IRQ coalescing added in the previous patch. Link: https://lore.kernel.org/20220313083640.501791-10-mkl@pengutronix.deSigned-off-by:
-
Marc Kleine-Budde authored
This patch adds RX IRQ coalescing support to the driver. The mcp251xfd chip doesn't support proper hardware based coalescing, so this patch tries to implemented it in software. The RX-FIFO offers a "FIFO not empty" interrupt, which is used if no coalescing is active. With activated RX IRQ coalescing the "FIFO not empty" interrupt is disabled in the RX IRQ handler and the "FIFO half full" or "FIFO full interrupt" (depending on RX max coalesced frames IRQ) is used instead. To avoid RX CAN frame starvation a hrtimer is setup with RX coalesce usecs IRQ,on timer expiration the "FIFO not empty" is enabled again. Support for ethtool configuration is added in the next patch. Link: https://lore.kernel.org/20220313083640.501791-9-mkl@pengutronix.deSigned-off-by:
-
Marc Kleine-Budde authored
This patch adds runtime configurable RX and TX ring parameters via ethtool to the driver. Link: https://lore.kernel.org/20220313083640.501791-8-mkl@pengutronix.deSigned-off-by:
-
Marc Kleine-Budde authored
So far the configuration of the hardware FIFOs is hard coded and depend only on the selected CAN mode (CAN-2.0 or CAN-FD). This patch updates the macros describing the ring, FIFO and RAM layout to prepare for the next patches that add support for runtime configurable ring parameters via ethtool. Link: https://lore.kernel.org/20220313083640.501791-7-mkl@pengutronix.deSigned-off-by:
-
