- 26 Apr, 2021 6 commits
-
-
Joseph Kogut authored
Remove usage of legacy dma-api abstraction in preparation for removal Signed-off-by:
Joseph Kogut <joseph.kogut@gmail.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210423020248.3427369-1-joseph.kogut@gmail.com
-
Maxime Ripard authored
Christian needs some patches from drm/next Signed-off-by:Maxime Ripard <maxime@cerno.tech>
-
Thomas Zimmermann authored
It's only used by DRM_FBDEV_EMULATION, so inline it there. Signed-off-by:
Thomas Zimmermann <tzimmermann@suse.de> Acked-by:
-
Thomas Zimmermann authored
Selecting DRM_FBDEV_EMULATION will include the correct settings for fbdev emulation. Drivers should not override this. Signed-off-by:
-
Thomas Zimmermann authored
Selecting DRM_FBDEV_EMULATION will include the correct settings for fbdev emulation. Drivers should not override this. Signed-off-by:
Stefan Agner <stefan@agner.ch> Acked-by:
-
Thomas Zimmermann authored
Respect DRM's kconfig setting for fbdev console emulation. If enabled, it will select all required config options. So remove them from vmwgfx's Kconfig file. Signed-off-by:
Zack Rusin <zackr@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210415110040.23525-2-tzimmermann@suse.de
-
- 23 Apr, 2021 6 commits
-
-
Christian König authored
The alignment is a constant property and shouldn't change. v2: move documentation as well as suggested by Matthew. Signed-off-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210413135248.1266-4-christian.koenig@amd.com
-
Christian König authored
No functional changes, just removing the leftovers from the redesign. Signed-off-by:
-
Christian König authored
vmwgfx is the only driver actually using this. Move the handling into the driver instead. Signed-off-by:
Huang Rui <ray.huang@amd.com> Reviewed-by:
-
Shiwu Zhang authored
In case that all pre-allocated BOs are busy, just continue to populate BOs since likely half of system memory in total is still free. v4 (chk): fix code moved to VMWGFX as well Signed-off-by:
Shiwu Zhang <shiwu.zhang@amd.com> Reviewed-by:
-
Sia Jee Heng authored
Support IEC958 encoded PCM format for ADV7511 so that ADV7511 HDMI audio driver can accept the IEC958 data from the I2S input. Signed-off-by:
Sia Jee Heng <jee.heng.sia@intel.com> Reviewed-by:
Robert Foss <robert.foss@linaro.org> Signed-off-by:
-
Dave Airlie authored
Merge tag 'drm-misc-next-fixes-2021-04-22' of git://anongit.freedesktop.org/drm/drm-misc into drm-next A few fixes for the next merge window, with some build fixes for anx7625 and lt8912b bridges, incorrect error handling for lt8912b and TTM, and one fix for TTM page limit accounting. Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210422163329.dvbuwre3akwdmzjt@gilmour
-
- 22 Apr, 2021 11 commits
-
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/ttm/ttm_device.c:42: warning: Function parameter or member 'ttm_global_mutex' not described in 'DEFINE_MUTEX' drivers/gpu/drm/ttm/ttm_device.c:42: warning: expecting prototype for ttm_global_mutex(). Prototype was for DEFINE_MUTEX() instead drivers/gpu/drm/ttm/ttm_device.c:112: warning: Function parameter or member 'ctx' not described in 'ttm_global_swapout' drivers/gpu/drm/ttm/ttm_device.c:112: warning: Function parameter or member 'gfp_flags' not described in 'ttm_global_swapout' drivers/gpu/drm/ttm/ttm_device.c:112: warning: expecting prototype for A buffer object shrink method that tries to swap out the first(). Prototype was for ttm_global_swapout() instead Cc: Christian Koenig <christian.koenig@amd.com> Cc: Huang Rui <ray.huang@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Signed-off-by:
Lee Jones <lee.jones@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210416143725.2769053-28-lee.jones@linaro.orgReviewed-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/scheduler/sched_entity.c:204: warning: expecting prototype for drm_sched_entity_kill_jobs(). Prototype was for drm_sched_entity_kill_jobs_cb() instead drivers/gpu/drm/scheduler/sched_entity.c:262: warning: expecting prototype for drm_sched_entity_cleanup(). Prototype was for drm_sched_entity_fini() instead drivers/gpu/drm/scheduler/sched_entity.c:305: warning: expecting prototype for drm_sched_entity_fini(). Prototype was for drm_sched_entity_destroy() instead Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: "Christian König" <christian.koenig@amd.com> Cc: dri-devel@lists.freedesktop.org Cc: linux-media@vger.kernel.org Cc: linaro-mm-sig@lists.linaro.org Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/ttm/ttm_bo.c:293: warning: expecting prototype for function ttm_bo_cleanup_refs(). Prototype was for ttm_bo_cleanup_refs() instead Cc: Christian Koenig <christian.koenig@amd.com> Cc: Huang Rui <ray.huang@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: dri-devel@lists.freedesktop.org Cc: linux-media@vger.kernel.org Cc: linaro-mm-sig@lists.linaro.org Signed-off-by:
-
Beatriz Martins de Carvalho authored
Remove space and use tabs for indent the code to follow the Linux kernel coding conventions. Problem found by checkpatch Signed-off-by:
Beatriz Martins de Carvalho <martinsdecarvalhobeatriz@gmail.com> Signed-off-by:
-
Beatriz Martins de Carvalho authored
Remove space and use tabs for indent the code to follow the Linux kernel coding conventions. Problem found by checkpatch. Signed-off-by:
-
Beatriz Martins de Carvalho authored
Remove space and use tabs for indent the code to follow the Linux kernel coding conventions. Problem found by checkpatch. Signed-off-by:
-
Beatriz Martins de Carvalho authored
Add a new line with */ on the last line of a block comment to follow the Linux kernel coding conventions. Problem found by checkpatch. Signed-off-by:
-
Beatriz Martins de Carvalho authored
Add a new line with */ on the last line of a block comment to follow the Linux kernel coding conventions. Problem found by checkpatch. Signed-off-by:
-
Beatriz Martins de Carvalho authored
Add a new line with */ on the last line of a block comment to follow the Linux kernel coding conventions. Problem found by checkpatch. Signed-off-by:
-
Beatriz Martins de Carvalho authored
Add a new line with */ on the last line of a block comment to follow the Linux kernel coding conventions. Problem found by checkpatch. Signed-off-by:
-
Beatriz Martins de Carvalho authored
Add a new line with */ on the last line of a block comment to follow the Linux kernel coding conventions. Problem found by checkpatch. Signed-off-by:
-
- 21 Apr, 2021 8 commits
-
-
Daniel Vetter authored
I always forget where it was, store it until this gets picked up by an internship again. Cc: Wambui Karuga <wambui.karugax@gmail.com> Cc: Melissa Wen <melissa.srw@gmail.com> Acked-by:
Melissa Wen <melissa.srw@gmail.com> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210421152911.1871473-1-daniel.vetter@ffwll.ch
-
Krzysztof Kozlowski authored
Remove trailing whitespaces. No functional change. Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by:
-
Krzysztof Kozlowski authored
Correct kerneldoc (remove wrong /** marker and adjust function name) to fix W=1 warnings: drivers/gpu/drm/gma500/cdv_intel_lvds.c:27: warning: expecting prototype for LVDS I2C backlight control macros(). Prototype was for BRIGHTNESS_MAX_LEVEL() instead drivers/gpu/drm/gma500/intel_gmbus.c:386: warning: expecting prototype for intel_gmbus_setup(). Prototype was for gma_intel_setup_gmbus() instead Signed-off-by: -
Felix Kuehling authored
Pages in SG BOs were not allocated by TTM. So don't count them against TTM's pages limit. Signed-off-by:
Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by:
-
Christian König authored
The function returns the number of swapped pages here. Only abort when we get a negative error code. Signed-off-by:
-
Phong LE authored
Add Neil Armstrong and myself as maintainers Signed-off-by:
Phong LE <ple@baylibre.com> Signed-off-by:
Neil Armstrong <narmstrong@baylibre.com> Reviewed-by:
-
Phong LE authored
This commit is a simple driver for bridge HMDI it66121. The input format is RBG and there is no color conversion. Audio, HDCP and CEC are not supported yet. Signed-off-by:
-
Phong LE authored
Add the ITE bridge HDMI it66121 bindings. Signed-off-by:
Rob Herring <robh@kernel.org> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210419071223.2673533-2-narmstrong@baylibre.com
-
- 20 Apr, 2021 9 commits
-
-
Douglas Anderson authored
Unpreparing and re-preparing a panel can be a really heavy operation. Panels datasheets often specify something on the order of 500ms as the delay you should insert after turning off the panel before turning it on again. In addition, turning on a panel can have delays on the order of 100ms - 200ms before the panel will assert HPD (AKA "panel ready"). The above means that we should avoid turning a panel off if we're going to turn it on again shortly. The above becomes a problem when we want to read the EDID of a panel. The way that ordering works is that userspace wants to read the EDID of the panel _before_ fully enabling it so that it can set the initial mode correctly. However, we can't read the EDID until we power it up. This leads to code that does this dance (like ps8640_bridge_get_edid()): 1. When userspace requests EDID / the panel modes (through an ioctl), we power on the panel just enough to read the EDID and then power it off. 2. Userspace then turns the panel on. There's likely not much time between step #1 and #2 and so we want to avoid powering the panel off and on again between those two steps. Let's use Runtime PM to help us. We'll move the existing prepare() and unprepare() to be runtime resume() and runtime suspend(). Now when we want to prepare() or unprepare() we just increment or decrement the refcount. We'll default to a 1 second autosuspend delay which seems sane given the typical delays we see for panels. A few notes: - It seems the existing unprepare() and prepare() are defined to be no-ops if called extra times. We'll preserve that behavior but may try to remove it in a future patch. - This is a slight change in the ABI of simple panel. If something was absolutely relying on the unprepare() to happen instantly that simply won't be the case anymore. I'm not aware of anyone relying on that behavior, but if there is someone then we'll need to figure out how to enable (or disable) this new delayed behavior selectively. - In order for this to work we now have a hard dependency on "PM". From memory this is a legit thing to assume these days and we don't have to find some fallback to keep working if someone wants to build their system without "PM". Signed-off-by:
Douglas Anderson <dianders@chromium.org> Reviewed-by:
-
Douglas Anderson authored
If we just leave the detect() function as NULL then the upper layers assume we're always connected. There's no reason for a stub. Signed-off-by:
Andrzej Hajda <a.hajda@samsung.com> Reviewed-by:
-
Douglas Anderson authored
We prepared the panel in pre_enable() so we should unprepare it in post_disable() to match. Signed-off-by:
-
Douglas Anderson authored
Let's make the remove() function strictly the reverse of the probe() function so it's easier to reason about. This patch was created by code inspection and should move us closer to a proper remove. Signed-off-by:
-
Douglas Anderson authored
A random comment inside a function had "/**" in front of it. That doesn't make sense. Remove. Signed-off-by:
-
Douglas Anderson authored
The clock framework makes it simple to deal with an optional clock. You can call clk_get_optional() and if the clock isn't specified it'll just return NULL without complaint. It's valid to pass NULL to enable/disable/prepare/unprepare. Let's make use of this to simplify things a tiny bit. Signed-off-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by:
Stephen Boyd <swboyd@chromium.org> Reviewed-by:
-
Douglas Anderson authored
The drm_bridge_chain_pre_enable() is not the proper opposite of drm_bridge_chain_post_disable(). It continues along the chain to _before_ the starting bridge. Let's fix that. Fixes: 05193dc3 ("drm/bridge: Make the bridge chain a double-linked list") Signed-off-by:
-
Neil Armstrong authored
On the Amlogic SoCs, the DW-HDMI HW support is here but the DW-HDMI CEC signal is not connected to a physical pin, leading to confusion when the dw-hdmi cec controller can't communicate on the bus. Disable it to avoid exposing a non-functinal bus. Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Link: https://patchwork.freedesktop.org/patch/msgid/20210416092737.1971876-3-narmstrong@baylibre.com
-
Jernej Skrabec authored
This adds DW-HDMI driver a glue option to disable loading of the CEC sub-driver. On some SoCs, the CEC functionality is enabled in the IP config bits, but the CEC bus is non-functional like on Amlogic SoCs, where the CEC config bit is set but the DW-HDMI CEC signal is not connected to a physical pin, leading to some confusion when the DW-HDMI CEC controller can't communicate on the bus. Reviewed-by:
Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by:
-
