- 20 Jul, 2007 40 commits
-
-
Adrian Bunk authored
This patch fixes the following compile error with CONFIG_SND_CS5530=y, CONFIG_ISA=n: <-- snip --> ... LD .tmp_vmlinux1 sound/built-in.o: In function 'snd_sb16_capture_trigger': sb16_main.c:(.text+0x212ad): undefined reference to 'snd_sbdsp_command' sb16_main.c:(.text+0x212cc): undefined reference to 'snd_sbdsp_command' sb16_main.c:(.text+0x212f7): undefined reference to 'snd_sbdsp_command' sound/built-in.o: In function 'snd_sb16_playback_trigger': sb16_main.c:(.text+0x2136d): undefined reference to 'snd_sbdsp_command' sb16_main.c:(.text+0x2138c): undefined reference to 'snd_sbdsp_command' ... <-- snip --> Signed-off-by:
Adrian Bunk <bunk@stusta.de> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Jaroslav Kysela <perex@suse.cz>
-
Takashi Iwai authored
Fix the default pin configuration of Abit AW9D-MAX. The board has a broken BIOS that doesn't set the correct pin default configs, which screws up the auto-configuration of snd-hda-intel driver. The patch enables the override of default pin config values. Signed-off-by:
-
Takashi Iwai authored
One of the newly added model entries causes a regression on Toshiba A100. It works fine with model=auto. So, let's deselect the entry again. Signed-off-by:
-
George Shapovalov authored
From: George Shapovalov <george@gentoo.org> Another case of ALSA ticket #3040: we need an explicit USB ID match for another Logitech camera/microphone device. Signed-off-by:
Daniel Drake <dsd@gentoo.org> Signed-off-by:
-
Takashi Iwai authored
Added a quirk for Roland EXR series. Reported by Andre Coetzee. Signed-off-by:
-
Takashi Iwai authored
Fix behaviour in poor resource conditions. With this new patch, tidied with indent and with SNDRV_PCM_TRIGGER_STOP being used. Signed-off by: Adrian McMenamin <adrian@mcmen.demon.co.uk> Signed-off-by:
-
Takashi Iwai authored
Show the last issued command in warning messages when any communication error with CORB/RIRB occurs. Also, a bit code clean-up for composing the command value in *_send_cmd(). Signed-off-by:
-
Takashi Iwai authored
Use ARRAY_SIZE() to calculate the number of pin widgets for each codec chip. This also fixes a typo in STAC9205 code that gives a wrong number (14 instead of 12), which resulted in fatal communication errors. Signed-off-by:
-
Robert P. J. Day authored
Signed-off-by:
Robert P. J. Day <rpjday@mindspring.com> Signed-off-by:
-
Takashi Iwai authored
The check of a substream in snd_pcm_drain() might not be always correct since runtime can point a different substream (although the PCM state of each linked substream should be same, in theory). This patch fixes it. Signed-off-by:
-
Takashi Iwai authored
Added missing model entries for HD-audio codecs in the module option list. Signed-off-by:
-
Takashi Iwai authored
Added the missing model option values for ALC262. Signed-off-by:
-
Claudio Matsuoka authored
Signed-off-by:
Claudio Matsuoka <cmatsuoka@gmail.com> Signed-off-by:
-
Claudio Matsuoka authored
Added HP Lucknow (ALC888) 5.1 surround support based on ALC883 6-channel threestack with changes in channel routing. Signed-off-by:
-
Claudio Matsuoka authored
Fixed HP Nettle 6ch/8ch channel routing based on ALC883 sixstack and swapping rear and center/LFE in verbs and mixer settings. Signed-off-by:
-
Takashi Iwai authored
Fix the mismatch of init verb and capture mux with VAIO STAC9872. Also, changed the item names to be more intuitive. Signed-off-by:
-
Kailang Yang authored
Fixed ALC662 auto mode, wrong NIDs were chosen. Signed-off-by:
Kailang Yang <kailang@realtek.com.tw> Signed-off-by:
-
Kailang Yang authored
- Added BenQ T31-16 AMD Turion64x2 (ALC262) support - Added models for ASUS machines with ALC861 Signed-off-by:
-
Claudio Matsuoka authored
Implemented LG LW20 5.1 support based on ALC880 threestack modes. It was previously set to use one DAC and 2 jack modes, giving 2-channel output only. Analog CD playing support is still missing. Signed-off-by:
-
Paul Vojta authored
Adds mention of opl3sa2 driver to a diagnostic message for NeoMagic nm256 driver. Signed-off-by:
Paul Vojta <vojta@math.berkeley.edu> Signed-off-by:
-
Paul Vojta authored
Add Neomagic MagicWave 3D to list of supported devices for opl3sa2 driver. Signed-off-by:
-
Claudio Matsuoka authored
Added the model for HP Nettle mobo with ALC883. From: Claudio Matsuoka <cmatsuoka@gmail.com> Signed-off-by:
-
Claudio Matsuoka authored
Added the model for HP Spartan with Conexant codec chip. From: Claudio Matsuoka <cmatsuoka@gmail.com> Signed-off-by:
-
Claudio Matsuoka authored
Added a quirk for Roland Juno-G. It's simply a copy of Fantom-X with the IDs changed. From: Claudio Matsuoka <cmatsuoka@gmail.com> Signed-off-by:
-
Masakazu Mokuno authored
The patch adds the support for the sound feature of PS3 - the digital output of HDMI and SPDIF optical, and the analog output of AV multi. Signed-off-by:
Masakazu Mokuno <mokuno@sm.sony.co.jp> Signed-off-by:
-
Carlo Beccaria authored
Add quirks to detect the Roland SH-201. Signed-off-by:
Carlo Beccaria <carlo@beccaria.org> Signed-off-by:
Clemens Ladisch <clemens@ladisch.de> Signed-off-by:
-
Takashi Iwai authored
The STAC codec support code has the automatic recognition of additional side-output pins, and this may result in an error when the assigned pin has no corresponding DAC connection. The patch fixes the problem -- it corrects the line_outs again without such additional pins. Signed-off-by:
-
Adrian Bunk authored
This patch removes some dead code spotted by the Coverity checker. Signed-off-by:
-
Randy Dunlap authored
FIx section mismatch when CONFIG_HOTPLUG=n: WARNING: sound/built-in.o(.exit.text+0x271): Section mismatch: reference to .init.text:snd_p ortman_unregister_all (between 'snd_portman_module_exit' and 'alsa_mpu401_uart_exit') Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
-
Randy Dunlap authored
Fix ensoniq driver sections when HOTPLUG=n, but code is used during resume, so it cannot be discarded: WARNING: sound/pci/snd-ens1371.o(.text+0x5c0): Section mismatch: reference to .init.text: (between 'snd_ensoniq_chip_init' and 'snd_ensoniq_free') Signed-off-by:
-
Tobin Davis authored
This patch changes the default configuration for the Fujitsu Siemens Si3515 Laptop to the correct model=laptop. Signed-off-by:
Tobin Davis <tdavis@dsl-only.net> Signed-off-by:
-
Mike Crash authored
Added support for S/PDIF digital output on ASUS M2V motheboard - added new model '3stack-660-digout' and ALC660VD_3ST_DIG Signed-off-by:
Mike Crash <mike@mikecrash.com> Signed-off-by:
-
Takashi Iwai authored
Fixed the invalid use of schedule_timeout_interruptible() without checking pending signals. Simply replaced with schedule_timeout(). Suggestions thanks to Jeff Garzik. Signed-off-by:
-
Randy Dunlap authored
Something about __init_or_module isn't working as expected (?). CONFIG_HOTPLUG=y CONFIG_MODULES=n Fix shared init/exit code helper: WARNING: sound/built-in.o(.exit.text+0x243): Section mismatch: reference to .init.text: (between 'alsa_card_mpu401_exit' and 'ac97_bus_exit') WARNING: sound/built-in.o(.exit.text+0x21b): Section mismatch: reference to .init.text: (between 'alsa_card_dummy_exit' and 'alsa_card_serial_exit') Signed-off-by:
-
Randy Dunlap authored
Fix shared init/exit function attributes: WARNING: sound/built-in.o(.exit.text+0x4a1): Section mismatch: reference to .init.text: (between 'alsa_card_virmidi_exit' and 'alsa_card_serial_exit') WARNING: sound/built-in.o(.exit.text+0x4c1): Section mismatch: reference to .init.text: (between 'alsa_card_serial_exit' and 'ac97_bus_exit') Signed-off-by:
-
Takashi Iwai authored
Added AD1882 codec support. It has currently two models, 3stack and 6stack. Signed-off-by:
-
Jonathan Phenix authored
This patch output information about the MFG (Modem Function Group) to the /proc/asound/card?/codec#? file. This information is important to identify if a HDA device has a modem or not. Signed-off-by:
Jonathan Phenix <jonathan@linuxant.com> Signed-off-by:
-
Matthew Ranostay authored
Added support for EAPD on the 927x, and 9227-8 IDT HDA codecs. Enabling EAPD powers the internal speaker amp otherwise there is no sound on systems with an internal amp. Signed-off-by:
Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by:
-
Takashi Iwai authored
Added a new model 'dell' for Dell XPS M1210 with STAC922x codec chip. Signed-off-by:
-
Tobin Davis authored
This patch adds support for the Fujitsu Seimens Amilo Pro v3515 notebook. Signed-off-by:
-
