If the DesignWare MAC is synthesised with MMC RX IPC Counter, an unmanaged
and unacknowledged interrupt is generated after some time of operation.

This patch masks the undesired interrupts.
Signed-off-by: Christian Ruppert <christian.ruppert@abilis.com>
Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

While enslaving a new device and after IFF_BONDING flag is set, in case
of failure it is not stripped from the device's priv_flags while
cleaning up, which could lead to other problems.
Cleaning at err_close because the flag is set after dev_open().

v2: no change
Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In commit 471cb5a3 ("bonding: remove
usage of dev->master") a bug was introduced which causes a NULL pointer
dereference. If a bond device is in mode 6 (ALB) and a slave is added
it will dereference a NULL pointer in bond_slave_netdev_event().
This is because in bond_enslave we have bond_alb_init_slave() which
changes the MAC address of the slave and causes a NETDEV_CHANGEADDR.
Then we have in bond_slave_netdev_event():
        struct slave *slave = bond_slave_get_rtnl(slave_dev);
        struct bonding *bond = slave->bond;
bond_slave_get_rtnl() dereferences slave_dev->rx_handler_data which at
that time is NULL since netdev_rx_handler_register() is called later.

This is fixed by checking if slave is NULL before dereferencing it.

v2: Comment style changed.
Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There is a bug in cookie_v4_check (net/ipv4/syncookies.c):
	flowi4_init_output(&fl4, 0, sk->sk_mark, RT_CONN_FLAGS(sk),
			   RT_SCOPE_UNIVERSE, IPPROTO_TCP,
			   inet_sk_flowi_flags(sk),
			   (opt && opt->srr) ? opt->faddr : ireq->rmt_addr,
			   ireq->loc_addr, th->source, th->dest);

Here we do not respect sk->sk_bound_dev_if, therefore wrong dst_entry may be
taken. This dst_entry is used by new socket (get_cookie_sock ->
tcp_v4_syn_recv_sock), so its packets may take the wrong path.
Signed-off-by: Dmitry Popov <dp@highloadlab.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull networking fixes from David Miller:

 1) cfg80211_conn_scan() must be called with the sched_scan_mutex, fix
    from Artem Savkov.

 2) Fix regression in TCP ICMPv6 processing, we do not want to treat
    redirects as socket errors, from Christoph Paasch.

 3) Fix several recvmsg() msg_name kernel memory leaks into userspace,
    in ATM, AX25, Bluetooth, CAIF, IRDA, s390 IUCV, L2TP, LLC, Netrom,
    NFC, Rose, TIPC, and VSOCK.  From Mathias Krause and Wei Yongjun.

 4) Fix AF_IUCV handling of segmented SKBs in recvmsg(), from Ursula
    Braun and Eric Dumazet.

 5) CAN gw.c code does kfree() on SLAB cache memory, use
    kmem_cache_free() instead.  Fix from Wei Yongjun.

 6) Fix LSM regression on TCP SYN/ACKs, some LSMs such as SELINUX want
    an skb->sk socket context available for these packets, but nothing
    else requires it.  From Eric Dumazet and Paul Moore.

 7) Fix ipv4 address lifetime processing so that we don't perform
    sleepable acts inside of rcu_read_lock() sections, do them in an
    rtnl_lock() section instead.  From Jiri Pirko.

 8) mvneta driver accidently sets HW features after device registry, it
    should do so beforehand.  Fix from Willy Tarreau.

 9) Fix bonding unload races more correctly, from Nikolay Aleksandrov
    and Veaceslav Falico.

10) rtnl_dump_ifinfo() and rtnl_calcit() invoke nlmsg_parse() with wrong
    header size argument.  Fix from Michael Riesch.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (44 commits)
  lsm: add the missing documentation for the security_skb_owned_by() hook
  bnx2x: Prevent null pointer dereference in AFEX mode
  e100: Add dma mapping error check
  selinux: add a skb_owned_by() hook
  can: gw: use kmem_cache_free() instead of kfree()
  netrom: fix invalid use of sizeof in nr_recvmsg()
  qeth: fix qeth_wait_for_threads() deadlock for OSN devices
  af_iucv: fix recvmsg by replacing skb_pull() function
  rtnetlink: Call nlmsg_parse() with correct header length
  bonding: fix bonding_masters race condition in bond unloading
  Revert "bonding: remove sysfs before removing devices"
  net: mvneta: enable features before registering the driver
  hyperv: Fix RNDIS send_completion code path
  hyperv: Fix a kernel warning from netvsc_linkstatus_callback()
  net: ipv4: fix schedule while atomic bug in check_lifetime()
  net: ipv4: reset check_lifetime_work after changing lifetime
  bnx2x: Fix KR2 rapid link flap
  sctp: remove 'sridhar' from maintainers list
  VSOCK: Fix missing msg_namelen update in vsock_stream_recvmsg()
  VSOCK: vmci - fix possible info leak in vmci_transport_dgram_dequeue()
  ...

Pull C6X fix from Mark Salter.

Final (?) fix from the barrier discussion.

* tag 'for-linus' of git://linux-c6x.org/git/projects/linux-c6x-upstreaming:
  add memory barrier to arch_local_irq_restore

Unfortunately we didn't catch the missing comments earlier when the
patch was merged.
Signed-off-by: Paul Moore <pmoore@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The cnic module is responsible for initializing various bnx2x structs
via callbacks provided by the bnx2x module.
One such struct is the queue object for the FCoE queue.

If a device is working in AFEX mode and its configuration allows FCoE yet
the cnic module is not loaded, it's very likely a null pointer dereference
will occur, as the bnx2x will erroneously access the FCoE's queue object.

Prevent said access until cnic properly registers itself.
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

e100 uses pci_map_single, but fails to check for a dma mapping error after its
use, resulting in a stack trace:

[   46.656594] ------------[ cut here ]------------
[   46.657004] WARNING: at lib/dma-debug.c:933 check_unmap+0x47b/0x950()
[   46.657004] Hardware name: To Be Filled By O.E.M.
[   46.657004] e100 0000:00:0e.0: DMA-API: device driver failed to check map
error[device address=0x000000007a4540fa] [size=90 bytes] [mapped as single]
[   46.657004] Modules linked in:
[   46.657004]  w83627hf hwmon_vid snd_via82xx ppdev snd_ac97_codec ac97_bus
snd_seq snd_pcm snd_mpu401 snd_mpu401_uart ns558 snd_rawmidi gameport parport_pc
e100 snd_seq_device parport snd_page_alloc snd_timer snd soundcore skge shpchp
k8temp mii edac_core i2c_viapro edac_mce_amd nfsd auth_rpcgss nfs_acl lockd
sunrpc binfmt_misc uinput ata_generic pata_acpi radeon i2c_algo_bit
drm_kms_helper ttm firewire_ohci drm firewire_core pata_via sata_via i2c_core
sata_promise crc_itu_t
[   46.657004] Pid: 792, comm: ip Not tainted 3.8.0-0.rc6.git0.1.fc19.x86_64 #1
[   46.657004] Call Trace:
[   46.657004]  <IRQ>  [<ffffffff81065ed0>] warn_slowpath_common+0x70/0xa0
[   46.657004]  [<ffffffff81065f4c>] warn_slowpath_fmt+0x4c/0x50
[   46.657004]  [<ffffffff81364cfb>] check_unmap+0x47b/0x950
[   46.657004]  [<ffffffff8136522f>] debug_dma_unmap_page+0x5f/0x70
[   46.657004]  [<ffffffffa030f0f0>] ? e100_tx_clean+0x30/0x210 [e100]
[   46.657004]  [<ffffffffa030f1a8>] e100_tx_clean+0xe8/0x210 [e100]
[   46.657004]  [<ffffffffa030fc6f>] e100_poll+0x56f/0x6c0 [e100]
[   46.657004]  [<ffffffff8159dce1>] ? net_rx_action+0xa1/0x370
[   46.657004]  [<ffffffff8159ddb2>] net_rx_action+0x172/0x370
[   46.657004]  [<ffffffff810703bf>] __do_softirq+0xef/0x3d0
[   46.657004]  [<ffffffff816e4ebc>] call_softirq+0x1c/0x30
[   46.657004]  [<ffffffff8101c485>] do_softirq+0x85/0xc0
[   46.657004]  [<ffffffff81070885>] irq_exit+0xd5/0xe0
[   46.657004]  [<ffffffff816e5756>] do_IRQ+0x56/0xc0
[   46.657004]  [<ffffffff816dacb2>] common_interrupt+0x72/0x72
[   46.657004]  <EOI>  [<ffffffff816da1eb>] ?
_raw_spin_unlock_irqrestore+0x3b/0x70
[   46.657004]  [<ffffffff816d124d>] __slab_free+0x58/0x38b
[   46.657004]  [<ffffffff81214424>] ? fsnotify_clear_marks_by_inode+0x34/0x120
[   46.657004]  [<ffffffff811b0417>] ? kmem_cache_free+0x97/0x320
[   46.657004]  [<ffffffff8157fc14>] ? sock_destroy_inode+0x34/0x40
[   46.657004]  [<ffffffff8157fc14>] ? sock_destroy_inode+0x34/0x40
[   46.657004]  [<ffffffff811b0692>] kmem_cache_free+0x312/0x320
[   46.657004]  [<ffffffff8157fc14>] sock_destroy_inode+0x34/0x40
[   46.657004]  [<ffffffff811e8c28>] destroy_inode+0x38/0x60
[   46.657004]  [<ffffffff811e8d5e>] evict+0x10e/0x1a0
[   46.657004]  [<ffffffff811e9605>] iput+0xf5/0x180
[   46.657004]  [<ffffffff811e4338>] dput+0x248/0x310
[   46.657004]  [<ffffffff811ce0e1>] __fput+0x171/0x240
[   46.657004]  [<ffffffff811ce26e>] ____fput+0xe/0x10
[   46.657004]  [<ffffffff8108d54c>] task_work_run+0xac/0xe0
[   46.657004]  [<ffffffff8106c6ed>] do_exit+0x26d/0xc30
[   46.657004]  [<ffffffff8109eccc>] ? finish_task_switch+0x7c/0x120
[   46.657004]  [<ffffffff816dad58>] ? retint_swapgs+0x13/0x1b
[   46.657004]  [<ffffffff8106d139>] do_group_exit+0x49/0xc0
[   46.657004]  [<ffffffff8106d1c4>] sys_exit_group+0x14/0x20
[   46.657004]  [<ffffffff816e3b19>] system_call_fastpath+0x16/0x1b
[   46.657004] ---[ end trace 4468c44e2156e7d1 ]---
[   46.657004] Mapped at:
[   46.657004]  [<ffffffff813663d1>] debug_dma_map_page+0x91/0x140
[   46.657004]  [<ffffffffa030e8eb>] e100_xmit_prepare+0x12b/0x1c0 [e100]
[   46.657004]  [<ffffffffa030c924>] e100_exec_cb+0x84/0x140 [e100]
[   46.657004]  [<ffffffffa030e56a>] e100_xmit_frame+0x3a/0x190 [e100]
[   46.657004]  [<ffffffff8159ee89>] dev_hard_start_xmit+0x259/0x6c0

Easy fix, modify the cb paramter to e100_exec_cb to return an error, and do the
dma_mapping_error check in the obvious place

This was reported previously here:
http://article.gmane.org/gmane.linux.network/257893

But nobody stepped up and fixed it.

CC: Josh Boyer <jwboyer@redhat.com>
CC: e1000-devel@lists.sourceforge.net
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Reported-by: Michal Jaegermann <michal@harddata.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull another nfs fixlet from Trond Myklebust:
 "I suddenly noticed that a one-line issue that I _thought_ I had fixed
  with the nfs41_walk_client_list patch was apparently still there in
  the pull request I sent earlier today.  I'm very sorry for not
  catching that in time.

   - Fix a brain fart in nfs41_walk_client_list"

* tag 'nfs-for-3.9-5' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  NFSv4: Doh! Typo in the fix to nfs41_walk_client_list

Make sure that we set the status to 0 on success. Missed in testing
because it never appears when doing multiple mounts to _different_
servers.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: <stable@vger.kernel.org> # 3.7.x: 7b1f1fd1: NFSv4/4.1: Fix bugs in nfs4[01]_walk_client_list

Pull NFS client bugfixes from Trond Myklebust:
 - fix for memory corruption issues in nfs4[01]_walk_client_list (stable)
 - fix for an Oopsable bug in rpc_clone_client (stable)
 - another state manager deadlock in the NFSv4 open code
 - memory leaks in nfs4_discover_server_trunking and rpc_new_client

* tag 'nfs-for-3.9-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  NFSv4: Fix another potential state manager deadlock
  SUNRPC: Fix a potential memory leak in rpc_new_client
  NFSv4/4.1: Fix bugs in nfs4[01]_walk_client_list
  NFSv4: Fix a memory leak in nfs4_discover_server_trunking
  SUNRPC: Remove extra xprt_put()

Pull crypto fixes from Herbert Xu:
 "This fixes a GCM bug that breaks IPsec and a compile problem in
  ux500."

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: ux500 - add missing comma
  crypto: gcm - fix assumption that assoc has one segment

Pull drm fixes from Dave Airlie:
 "Just a spare semicolon in nouveau that caused some issues, and an
  mgag200 fix"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/mgag200: Index 24 in extended CRTC registers is 24 in hex, not decimal.
  drm/nouveau: fix unconditional return waiting on memory

This change properly enables the "requester" in G200ER cards that is
responsible for getting pixels out of memory and clocking them out to
the screen.
Signed-off-by: Christopher Harvey <charvey@matrox.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>

arch_local_irq_save() and friends are required to act as compiler
memory barriers. This patch adds a "memory" clobber to the inline
asm code in arch_local_irq_restore() which is used as the building
block for other functions needing to set/clear the interrupt enable
in the CSR register.
Signed-off-by: Mark Salter <msalter@redhat.com>

Pull vfs fixes from Al Viro:
 "A nasty bug in fs/namespace.c caught by Andrey + a couple of less
  serious unpleasantness - ecryptfs misc device playing hopeless games
  with try_module_get() and palinfo procfs support being...  not quite
  correctly done, to be polite."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  mnt: release locks on error path in do_loopback
  palinfo fixes
  procfs: add proc_remove_subtree()
  ecryptfs: close rmmod race

Pull vfio overflow fix from Alex Williamson.

* tag 'vfio-v3.9-rc7' of git://github.com/awilliam/linux-vfio:
  vfio-pci: Fix possible integer overflow

Pull block fixes from Jens Axboe:
 "I've got a few smaller fixes queued up for 3.9 that should go in.  The
  major one is the loop regression, the others are nice fixes on their
  own though.  It contains:

   - Fix for unitialized var in the block sysfs code, courtesy of Arnd
     and gcc-4.8.

   - Two fixes for mtip32xx, fixing probe and command timeout.  Also a
     debug measure that could have waited for 3.10, but it's driver
     only, so I let it slip in.

   - Revert the loop partition cleanup fix, it could cause a deadlock on
     auto-teardown as part of umount.  The fix is clear, but at this
     point we just want to revert it and get a real fix in for 3.10."

* tag 'for-linus-20130409' of git://git.kernel.dk/linux-block:
  Revert "loop: cleanup partitions when detaching loop device"
  mtip32xx: fix two smatch warnings
  mtip32xx: Add debugfs entry device_status
  mtip32xx: return 0 from pci probe in case of rebuild
  mtip32xx: recovery from command timeout
  block: avoid using uninitialized value in from queue_var_store

do_loopback calls lock_mount(path) and forget to unlock_mount
if clone_mnt or copy_mnt fails.

[   77.661566] ================================================
[   77.662939] [ BUG: lock held when returning to user space! ]
[   77.664104] 3.9.0-rc5+ #17 Not tainted
[   77.664982] ------------------------------------------------
[   77.666488] mount/514 is leaving the kernel with locks still held!
[   77.668027] 2 locks held by mount/514:
[   77.668817]  #0:  (&sb->s_type->i_mutex_key#7){+.+.+.}, at: [<ffffffff811cca22>] lock_mount+0x32/0xe0
[   77.671755]  #1:  (&namespace_sem){+++++.}, at: [<ffffffff811cca3a>] lock_mount+0x4a/0xe0
Signed-off-by: Andrey Vagin <avagin@openvz.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

	* check for proc_mkdir() failures
	* fix buffer overrun - sizeof(format string) is *not* enough to
hold sprintf() result.
	* use proc_remove_subtree(); life's much easier with it
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

just what it sounds like; do that only to procfs subtrees you've
created - doing that to something shared with another driver is
not only antisocial, but might cause interesting races with
proc_create() and its ilk.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

In UP and non-preempt respectively, the spinlocks and preemption
disable/enable points are stubbed out entirely, because there is no
regular code that can ever hit the kind of concurrency they are meant to
protect against.

However, while there is no regular code that can cause scheduling, we
_do_ end up having some exceptional (literally!) code that can do so,
and that we need to make sure does not ever get moved into the critical
region by the compiler.

In particular, get_user() and put_user() is generally implemented as
inline asm statements (even if the inline asm may then make a call
instruction to call out-of-line), and can obviously cause a page fault
and IO as a result.  If that inline asm has been scheduled into the
middle of a preemption-safe (or spinlock-protected) code region, we
obviously lose.

Now, admittedly this is *very* unlikely to actually ever happen, and
we've not seen examples of actual bugs related to this.  But partly
exactly because it's so hard to trigger and the resulting bug is so
subtle, we should be extra careful to get this right.

So make sure that even when preemption is disabled, and we don't have to
generate any actual *code* to explicitly tell the system that we are in
a preemption-disabled region, we need to at least tell the compiler not
to move things around the critical region.

This patch grew out of the same discussion that caused commits
79e5f05e ("ARC: Add implicit compiler barrier to raw_local_irq*
functions") and 3e2e0d2c ("tile: comment assumption about
__insn_mtspr for <asm/irqflags.h>") to come about.

Note for stable: use discretion when/if applying this.  As mentioned,
this bug may never have actually bitten anybody, and gcc may never have
done the required code motion for it to possibly ever trigger in
practice.

Cc: stable@vger.kernel.org
Cc: Steven Rostedt <srostedt@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Marc Kleine-Budde says:

====================
here's a fix for the v3.9 release cycle, if not too late:

Wei Yongjun contributes a patch for the can-gw protocoll. The patch fixes the
memory allocated with kmem_cache_alloc(), is now freed using kmem_cache_free(),
not kfree().
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 90ba9b19 (tcp: tcp_make_synack() can use alloc_skb())
broke certain SELinux/NetLabel configurations by no longer correctly
assigning the sock to the outgoing SYNACK packet.

Cost of atomic operations on the LISTEN socket is quite big,
and we would like it to happen only if really needed.

This patch introduces a new security_ops->skb_owned_by() method,
that is a void operation unless selinux is active.
Reported-by: Miroslav Vadkerti <mvadkert@redhat.com>
Diagnosed-by: Paul Moore <pmoore@redhat.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-security-module@vger.kernel.org
Acked-by: James Morris <james.l.morris@oracle.com>
Tested-by: Paul Moore <pmoore@redhat.com>
Acked-by: Paul Moore <pmoore@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Don't hold the NFSv4 sequence id while we check for open permission.
The call to ACCESS may block due to reboot recovery.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

The arch_local_irq_save(), etc., routines are required to function
as compiler barriers.  They do, but it's subtle and requires knowing
that the gcc builtin __insn_mtspr() is marked as a memory clobber.
Provide a comment explaining the assumption.
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
[ This came about from me wondering about the synchronization rules of
  __insn_mtspr()   - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Memory allocated by kmem_cache_alloc() should be freed using
kmem_cache_free(), not kfree().

Cc: linux-stable <stable@vger.kernel.org> # >= v3.2
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

sizeof() when applied to a pointer typed expression gives the size of the
pointer, not that of the pointed data.
Introduced by commit 3ce5ef(netrom: fix info leak via msg_name in nr_recvmsg)
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull a hwspinlock fix from Ohad Ben-Cohen:
 "An hwspinlock fix from Li Fei, taking care of a faulty error path."

* tag 'hwspinlock-3.9-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/ohad/hwspinlock:
  hwspinlock: fix __hwspin_lock_request error path

Pull remoteproc fixes from Ohad Ben-Cohen:
 "Four small remoteproc fixes:
   - Suman fixed an issue that crawled in with the move to the new
     idr_alloc interface in 3.9
   - Dmitry fixed an STE specific memory leak
   - Sjur fixed an error path in the core
   - Rob fixed a Kconfig typo"

* tag 'remoteproc-3.9-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ohad/remoteproc:
  remoteproc: fix FW_CONFIG typo
  remoteproc: fix error path of handle_vdev
  remoteproc/ste: fix memory leak on shutdown
  remoteproc: fix the error check for idr_alloc

Merge branch 'drm-nouveau-fixes-3.9' of git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-fixes

too many semicolons.

* 'drm-nouveau-fixes-3.9' of git://anongit.freedesktop.org/git/nouveau/linux-2.6:
  drm/nouveau: fix unconditional return waiting on memory

Typo in nv50_display_flip_wait allows page flipping to run ahead before
memory has time to settle.
Signed-off-by: Calvin Owens <jcalvinowens@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Pull powerpc bugfix from Stephen Rothwell:
 "A single BUG_ON fix for a condition that could happen for machines
  with certain hardware installed."

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sfr/next-fixes:
  powerpc: pSeries_lpar_hpte_remove fails from Adjunct partition being performed before the ANDCOND test

ARC irqsave/restore macros were missing the compiler barrier, causing a
stale load in irq-enabled region be used in irq-safe region, despite
being changed, because the register holding the value was still live.

The problem manifested as random crashes in timer code when stress
testing ARCLinux (3.9-rc3) on a !SMP && !PREEMPT_COUNT

Here's the exact sequence which caused this:
 (0). tv1[x] <----> t1 <---> t2
 (1). mod_timer(t1) interrupted after it calls timer_pending()
 (2). mod_timer(t2) completes
 (3). mod_timer(t1) resumes but messes up the list
 (4). __runt_timers( ) uses bogus timer_list entry / crashes in
      timer->function

Essentially mod_timer() was racing against itself and while the spinlock
serialized the tv1[] timer link list, timer_pending() called outside the
spinlock, cached timer link list element in a register.
With low register pressure (and a deep register file), lack of barrier
in raw_local_irqsave() as well as preempt_disable (!PREEMPT_COUNT
version), there was nothing to force gcc to reload across the spinlock,
causing a stale value in reg be used for link list manipulation - ensuing
a corruption.

ARcompact disassembly which shows the culprit generated code:

mod_timer:
    push_s blink
    mov_s r13,r0	# timer, timer
..
    ###### timer_pending( )
    ld_s r3,[r13]       # <------ <variable>.entry.next LOADED
    brne r3, 0, @.L163

.L163:
..
    ###### spin_lock_irq( )
    lr  r5, [status32]  # flags
    bic r4, r5, 6       # temp, flags,
    and.f 0, r5, 6      # flags,
    flag.nz r4

    ###### detach_if_pending( ) begins

    tst_s r3,r3  <--------------
			# timer_pending( ) checks timer->entry.next
                        # r3 is NOT reloaded by gcc, using stale value
    beq.d @.L169
    mov.eq r0,0

    #####  detach_timer( ): __list_del( )

    ld r4,[r13,4]    	# <variable>.entry.prev, D.31439
    st r4,[r3,4]     	# <variable>.prev, D.31439
    st r3,[r4]       	# <variable>.next, D.30246

We initially tried to fix this by adding barrier() to preempt_* macros
for !PREEMPT_COUNT but Linus clarified that it was anything but wrong.
http://www.spinics.net/lists/kernel/msg1512709.html

[vgupta: updated commitlog]

Reported-by/Signed-off-by: Christian Ruppert <christian.ruppert@abilis.com>
Cc: Christian Ruppert <christian.ruppert@abilis.com>
Cc: Pierrick Hascoet <pierrick.hascoet@abilis.com>
Debugged-by/Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull libata fixes from Jeff Garzik:
 "The HDIO_DRIVE_* fix is really the biggie.

  1) Fix ATAPI regression, noticed mainly on tape drives, due to a
     commit which mistakenly changed an 'int' return type to a 'bool'.
     Broken by commit 4dce8ba9 ("libata: Use 'bool' return value for
     ata_id_XXX")

  2) Add Slimtype DVD A DS8A8SH ATAPI quirk

  3) ata_piix: Intel Haswell platform quirk

  4) Avoid DMA'ing to stack buffer, when obtaining DEVSLP timings.  IMO
     a mild regression, given that libata previously did not DMA to a
     stack buffer.  Broken by commit commit 803739d2 ("[libata]
     replace sata_settings with devslp_timing")

  5) Fix regression impacting SMART and smartd, broken by commit
     84a9a8cd ("[libata] Set proper SK when CK_COND is set")"

* tag 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  [libata] Fix HDIO_DRIVE_* ioctl() Linux 3.9 regression
  libata: fix DMA to stack in reading devslp_timing parameters
  ata_piix: Fix DVD not dectected at some Haswell platforms
  libata: Set max sector to 65535 for Slimtype DVD A DS8A8SH drive
  libata: Use integer return value for atapi_command_packet_set

Merge tag 'trace-fixes-3.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull tracing fixes from Steven Rostedt:
 "This includes three fixes.  Two fix features added in 3.9 and one
  fixes a long time minor bug.

  The first patch fixes a race that can happen if the user switches from
  the irqsoff tracer to another tracer.  If a irqs off latency is
  detected, it will try to use the snapshot buffer, but the new tracer
  wont have it allocated.  There's a nasty warning that gets printed and
  the trace is ignored.  Nothing crashes, just a nasty WARN_ON is shown.

  The second patch fixes an issue where if the sysctl is used to disable
  and enable function tracing, it can put the function tracing into an
  unstable state.

  The third patch fixes an issue with perf using the function tracer.
  An update was done, where the stub function could be called during the
  perf function tracing, and that stub function wont have the "control"
  flag set and cause a nasty warning when running perf."

* tag 'trace-fixes-3.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  ftrace: Do not call stub functions in control loop
  ftrace: Consistently restore trace function on sysctl enabling
  tracing: Fix race with update_max_tr_single and changing tracers

Any recovery thread will deadlock when calling qeth_wait_for_threads(), most
notably when triggering a recovery on an OSN device.
This patch will store the recovery thread's task pointer on recovery
invocation and check in qeth_wait_for_threads() respectively to avoid
deadlocks.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Frank Blaschka <blaschka@linux.vnet.ibm.com>
Reviewed-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When receiving data messages, the "BUG_ON(skb->len < skb->data_len)" in
the skb_pull() function triggers a kernel panic.

Replace the skb_pull logic by a per skb offset as advised by
Eric Dumazet.
Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: Frank Blaschka <blaschka@linux.vnet.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>