We use skb->size with sk_rmem_scheduled() which is not correct. Instead
use truesize to align with socket and tcp stack usage of sk_rmem_schedule.
Suggested-by: Daniel Borkman <daniel@iogearbox.net>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/160556570616.73229.17003722112077507863.stgit@john-XPS-13-9370

Fix sockmap sk_skb programs so that they observe sk_rcvbuf limits. This
allows users to tune SO_RCVBUF and sockmap will honor them.

We can refactor the if(charge) case out in later patches. But, keep this
fix to the point.

Fixes: 51199405 ("bpf: skb_verdict, support SK_PASS on RX BPF path")
Suggested-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/160556568657.73229.8404601585878439060.stgit@john-XPS-13-9370

If copy_page_to_iter() fails or even partially completes, but with fewer
bytes copied than expected we currently reset sg.start and return EFAULT.
This proves problematic if we already copied data into the user buffer
before we return an error. Because we leave the copied data in the user
buffer and fail to unwind the scatterlist so kernel side believes data
has been copied and user side believes data has _not_ been received.

Expected behavior should be to return number of bytes copied and then
on the next read we need to return the error assuming its still there. This
can happen if we have a copy length spanning multiple scatterlist elements
and one or more complete before the error is hit.

The error is rare enough though that my normal testing with server side
programs, such as nginx, httpd, envoy, etc., I have never seen this. The
only reliable way to reproduce that I've found is to stream movies over
my browser for a day or so and wait for it to hang. Not very scientific,
but with a few extra WARN_ON()s in the code the bug was obvious.

When we review the errors from copy_page_to_iter() it seems we are hitting
a page fault from copy_page_to_iter_iovec() where the code checks
fault_in_pages_writeable(buf, copy) where buf is the user buffer. It
also seems typical server applications don't hit this case.

The other way to try and reproduce this is run the sockmap selftest tool
test_sockmap with data verification enabled, but it doesn't reproduce the
fault. Perhaps we can trigger this case artificially somehow from the
test tools. I haven't sorted out a way to do that yet though.

Fixes: 604326b4 ("bpf, sockmap: convert to generic sk_msg interface")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/160556566659.73229.15694973114605301063.stgit@john-XPS-13-9370

Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.

Fixes: 65b4414a ("selftests/bpf: add sockopt test that exercises BPF_F_ALLOW_MULTI")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20201116101633.64627-1-wanghai38@huawei.com

Currently verifier enforces return code checks for subprograms in the
same manner as it does for program entry points. This prevents returning
arbitrary scalar values from subprograms. Scalar type of returned values
is checked by btf_prepare_func_args() and hence it should be safe to
allow only scalars for now. Relax return code checks for subprograms and
allow any correct scalar values.

Fixes: 51c39bb1 (bpf: Introduce function-by-function verification)
Signed-off-by: Dmitrii Banshchikov <me@ubique.spb.ru>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20201113171756.90594-1-me@ubique.spb.ru

progfd is created by prog_parse_fd() in do_attach() and before the latter
returns in case of success, the file descriptor should be closed.

Fixes: 04949ccc ("tools: bpftool: add net attach command to attach XDP on interface")
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20201113115152.53178-1-wanghai38@huawei.com

Andrii has been a de-facto maintainer for libbpf and other components.
Update maintainers entry to acknowledge his work de-jure.

The folks with git write permissions will continue to follow the rule
of not applying their own patches unless absolutely trivial.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20201112180340.45265-1-alexei.starovoitov@gmail.com

Correct attribute name is "unused". maybe_unused is a C++17 addition.
This patch fixes compilation warning during selftests compilation.

Fixes: 197afc63 ("libbpf: Don't attempt to load unused subprog as an entry-point BPF program")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201111231215.1779147-1-andrii@kernel.org

The unsigned variable datasec_id is assigned a return value from the call
to check_pseudo_btf_id(), which may return negative error code.

This fixes the following coccicheck warning:

  ./kernel/bpf/verifier.c:9616:5-15: WARNING: Unsigned expression compared with zero: datasec_id > 0

Fixes: eaa6bcb7 ("bpf: Introduce bpf_per_cpu_ptr()")
Reported-by: Tosk Robot <tencent_os_robot@tencent.com>
Signed-off-by: Kaixu Xia <kaixuxia@tencent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Cc: Hao Luo <haoluo@google.com>
Link: https://lore.kernel.org/bpf/1605071026-25906-1-git-send-email-kaixuxia@tencent.com

There is a bug when passing zero to PTR_ERR() and return.
Fix the smatch error.

Fixes: c4d0bfb4 ("bpf: Add bpf_snprintf_btf helper")
Signed-off-by: Wang Qing <wangqing@vivo.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/1604735144-686-1-git-send-email-wangqing@vivo.com

If BPF code contains unused BPF subprogram and there are no other subprogram
calls (which can realistically happen in real-world applications given
sufficiently smart Clang code optimizations), libbpf will erroneously assume
that subprograms are entry-point programs and will attempt to load them with
UNSPEC program type.

Fix by not relying on subcall instructions and rather detect it based on the
structure of BPF object's sections.

Fixes: 9a94f277 ("tools: libbpf: restore the ability to load programs from .text section")
Reported-by: Dmitrii Banshchikov <dbanschikov@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20201107000251.256821-1-andrii@kernel.org

With CONFIG_BRIDGE=m the compilation fails:

    ld: drivers/net/ethernet/marvell/prestera/prestera_switchdev.o: in function `prestera_bridge_port_event':
    prestera_switchdev.c:(.text+0x2ebd): undefined reference to `br_vlan_enabled'

in case the driver is statically enabled.

Fix it by adding 'BRIDGE || BRIDGE=n' dependency.

Fixes: e1189d9a ("net: marvell: prestera: Add Switchdev driver implementation")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Link: https://lore.kernel.org/r/20201106161128.24069-1-vadym.kochan@plvision.euSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Saeed Mahameed says:

====================
mlx5 fixes 2020-11-03

v1->v2:
 - Fix fixes line tag in patch #1
 - Toss ktls refcount leak fix, Maxim will look further into the root
   cause.
 - Toss eswitch chain 0 prio patch, until we determine if it is needed
   for -rc and net.

* tag 'mlx5-fixes-2020-11-03' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
  net/mlx5e: Fix incorrect access of RCU-protected xdp_prog
  net/mlx5e: Fix VXLAN synchronization after function reload
  net/mlx5: E-switch, Avoid extack error log for disabled vport
  net/mlx5: Fix deletion of duplicate rules
  net/mlx5e: Use spin_lock_bh for async_icosq_lock
  net/mlx5e: Protect encap route dev from concurrent release
  net/mlx5e: Fix modify header actions memory leak
====================

Link: https://lore.kernel.org/r/20201105202129.23644-1-saeedm@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

RTL8125B has same or similar short packet hw padding bug as RTL8168evl.
The main workaround has been extended accordingly, however we have to
disable also hw checksumming for short packets on affected new chip
versions. Instead of checking for an affected chip version let's
simply disable hw checksumming for short packets in general.

v2:
- remove the version checks and disable short packet hw csum in general
- reflect this in commit title and message

Fixes: 0439297b ("r8169: add support for RTL8125B")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/7fbb35f0-e244-ef65-aa55-3872d7d38698@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The caller of rtl8169_tso_csum_v2() frees the skb if false is returned.
eth_skb_pad() internally frees the skb on error what would result in a
double free. Therefore use __skb_put_padto() directly and instruct it
to not free the skb on error.

Fixes: b423e9ae ("r8169: fix offloaded tx checksum for small packets.")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/f7e68191-acff-9ded-4263-c016428a8762@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Alexei Starovoitov says:

====================
pull-request: bpf 2020-11-06

1) Pre-allocated per-cpu hashmap needs to zero-fill reused element, from David.

2) Tighten bpf_lsm function check, from KP.

3) Fix bpftool attaching to flow dissector, from Lorenz.

4) Use -fno-gcse for the whole kernel/bpf/core.c instead of function attribute, from Ard.

* git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
  bpf: Update verification logic for LSM programs
  bpf: Zero-fill re-used per-cpu map element
  bpf: BPF_PRELOAD depends on BPF_SYSCALL
  tools/bpftool: Fix attaching flow dissector
  libbpf: Fix possible use after free in xsk_socket__delete
  libbpf: Fix null dereference in xsk_socket__delete
  libbpf, hashmap: Fix undefined behavior in hash_bits
  bpf: Don't rely on GCC __attribute__((optimize)) to disable GCSE
  tools, bpftool: Remove two unused variables.
  tools, bpftool: Avoid array index warnings.
  xsk: Fix possible memory leak at socket close
  bpf: Add struct bpf_redir_neigh forward declaration to BPF helper defs
  samples/bpf: Set rlimit for memlock to infinity in all samples
  bpf: Fix -Wshadow warnings
  selftest/bpf: Fix profiler test using CO-RE relocation for enums
====================

Link: https://lore.kernel.org/r/20201106221759.24143-1-alexei.starovoitov@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The current logic checks if the name of the BTF type passed in
attach_btf_id starts with "bpf_lsm_", this is not sufficient as it also
allows attachment to non-LSM hooks like the very function that performs
this check, i.e. bpf_lsm_verify_prog.

In order to ensure that this verification logic allows attachment to
only LSM hooks, the LSM_HOOK definitions in lsm_hook_defs.h are used to
generate a BTF_ID set. Upon verification, the attach_btf_id of the
program being attached is checked for presence in this set.

Fixes: 9e4e01df ("bpf: lsm: Implement attach, detach and execution")
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201105230651.2621917-1-kpsingh@chromium.org

Pull mtd fixes from Miquel Raynal.

* 'mtd/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
  mtd: rawnand: stm32_fmc2: fix broken ECC
  mtd: spi-nor: Fix address width on flash chips > 16MB
  mtd: spi-nor: Don't copy self-pointing struct around
  mtd: rawnand: ifc: Move the ECC engine initialization to the right place
  mtd: rawnand: mxc: Move the ECC engine initialization to the right place

Pull spi fix from Mark Brown:
 "This is an additional fix on top of 5e31ba0c ('spi: bcm2835: fix
  gpio cs level inversion') - when sending my prior pull request I had
  misremembred the status of that patch, apologies for the noise here"

* tag 'spi-fix-v5.10-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: bcm2835: remove use of uninitialized gpio flags variable

Pull sound fixes from Takashi Iwai:
 "Quite a bunch of small fixes that have been gathered since the last
  pull, including changes like below:

   - HD-audio runtime PM fixes and refactoring

   - HD-audio and USB-audio quirks

   - SOF warning fix

   - Various ASoC device-specific fixes for Intel, Qualcomm, etc"

* tag 'sound-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (26 commits)
  ALSA: usb-audio: Add implicit feedback quirk for Qu-16
  ASoC: mchp-spdiftx: Do not set Validity bit(s)
  ALSA: usb-audio: Add implicit feedback quirk for MODX
  ALSA: usb-audio: add usb vendor id as DSD-capable for Khadas devices
  ALSA: hda/realtek - Enable headphone for ASUS TM420
  ALSA: hda: prevent undefined shift in snd_hdac_ext_bus_get_link()
  ASoC: qcom: lpass-cpu: Fix clock disable failure
  ASoC: qcom: lpass-sc7180: Fix MI2S bitwidth field bit positions
  ASoC: codecs: wcd9335: Set digital gain range correctly
  ASoC: codecs: wcd934x: Set digital gain range correctly
  ALSA: hda: Reinstate runtime_allow() for all hda controllers
  ALSA: hda: Separate runtime and system suspend
  ALSA: hda: Refactor codec PM to use direct-complete optimization
  ALSA: hda/realtek - Fixed HP headset Mic can't be detected
  ALSA: usb-audio: Add implicit feedback quirk for Zoom UAC-2
  ALSA: make snd_kcontrol_new name a normal string
  ALSA: fix kernel-doc markups
  ASoC: SOF: loader: handle all SOF_IPC_EXT types
  ASoC: cs42l51: manage mclk shutdown delay
  ASoC: qcom: sdm845: set driver name correctly
  ...

Pull drm fixes from Dave Airlie:
 "It's Friday here so that means another installment of drm fixes to
  distract you from the counting process.

  Changes all over the place, the amdgpu changes contain support for a
  new GPU that is close to current one already in the tree (Green
  Sardine) so it shouldn't have much side effects.

  Otherwise imx has a few cleanup patches and fixes, amdgpu and i915
  have around the usual smattering of fixes, fonts got constified, and
  vc4/panfrost has some minor fixes. All in all a fairly regular rc3.

  We have an outstanding nouveau regression, but the author is looking
  into the fix, so should be here next week.

  I now return you to counting.

  fonts:
   - constify font structures.

  MAINTAINERS:
   - Fix path for amdgpu power management

  amdgpu:
   - Add support for more navi1x SKUs
   - Fix for suspend on CI dGPUs
   - VCN DPG fix for Picasso
   - Sienna Cichlid fixes
   - Polaris DPM fix
   - Add support for Green Sardine

  amdkfd:
   - Fix an allocation failure check

  i915:
   - Fix set domain's cache coherency
   - Fixes around breadcrumbs
   - Fix encoder lookup during PSR atomic
   - Hold onto an explicit ref to i915_vma_work.pinned
   - gvt: HWSP reset handling fix
   - gvt: flush workaround
   - gvt: vGPU context pin/unpin
   - gvt: mmio cmd access fix for bxt/apl

  imx:
   - drop unused functions and callbacks
   - reuse imx_drm_encoder_parse_of
   - spinlock rework
   - memory leak fix
   - minor cleanups

  vc4:
   - resource cleanup fix

  panfrost:
   - madvise/shrinker fix"

* tag 'drm-fixes-2020-11-06-1' of git://anongit.freedesktop.org/drm/drm: (55 commits)
  drm/amdgpu/display: remove DRM_AMD_DC_GREEN_SARDINE
  drm/amd/display: Add green_sardine support to DM
  drm/amd/display: Add green_sardine support to DC
  drm/amdgpu: enable vcn support for green_sardine (v2)
  drm/amdgpu: enable green_sardine_asd.bin loading (v2)
  drm/amdgpu/sdma: add sdma engine support for green_sardine (v2)
  drm/amdgpu: add gfx support for green_sardine (v2)
  drm/amdgpu: add soc15 common ip block support for green_sardine (v3)
  drm/amdgpu: add green_sardine support for gpu_info and ip block setting (v2)
  drm/amdgpu: add Green_Sardine APU flag
  drm/amdgpu: resolved ASD loading issue on sienna
  amdkfd: Check kvmalloc return before memcpy
  drm/amdgpu: update golden setting for sienna_cichlid
  amd/amdgpu: Disable VCN DPG mode for Picasso
  drm/amdgpu/swsmu: remove duplicate call to smu_set_default_dpm_table
  drm/i915: Hold onto an explicit ref to i915_vma_work.pinned
  drm/i915/gt: Flush xcs before tgl breadcrumbs
  drm/i915/gt: Expose more parameters for emitting writes into the ring
  drm/i915: Fix encoder lookup during PSR atomic check
  drm/i915/gt: Use the local HWSP offset during submission
  ...

Merge tag 'tpmdd-next-v5.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd

Pull tpm fixes from Jarkko Sakkinen:
 "Two critical tpm driver bug fixes"

* tag 'tpmdd-next-v5.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
  tpm: efi: Don't create binary_bios_measurements file for an empty log
  tpm_tis: Disable interrupts on ThinkPad T490s

Pull iommu fixes from Joerg Roedel:

 - Fix a NULL-ptr dereference in the Intel VT-d driver

 - Two fixes for Intel SVM support

 - Increase IRQ remapping table size in the AMD IOMMU driver. The old
   number of 128 turned out to be too low for some recent devices.

 - Fix a mask check in generic IOMMU code

* tag 'iommu-fixes-v5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu: Fix a check in iommu_check_bind_data()
  iommu/vt-d: Fix a bug for PDP check in prq_event_thread
  iommu/vt-d: Fix sid not set issue in intel_svm_bind_gpasid()
  iommu/vt-d: Fix kernel NULL pointer dereference in find_domain()
  iommu/amd: Increase interrupt remapping table limit to 512 entries

Pull VFIO fixes from Alex Williamson:

 - Remove code by using existing helper (Zenghui Yu)

 - fsl-mc copy-user return and underflow fixes (Dan Carpenter)

 - fsl-mc static function declaration (Diana Craciun)

 - Fix ioeventfd sleeping under spinlock (Alex Williamson)

 - Fix pm reference count leak in vfio-platform (Zhang Qilong)

 - Allow opening IGD device w/o OpRegion support (Fred Gao)

* tag 'vfio-v5.10-rc3' of git://github.com/awilliam/linux-vfio:
  vfio/pci: Bypass IGD init in case of -ENODEV
  vfio: platform: fix reference leak in vfio_platform_open
  vfio/pci: Implement ioeventfd thread handler for contended memory lock
  vfio/fsl-mc: Make vfio_fsl_mc_irqs_allocate static
  vfio/fsl-mc: prevent underflow in vfio_fsl_mc_mmap()
  vfio/fsl-mc: return -EFAULT if copy_to_user() fails
  vfio/type1: Use the new helper to find vfio_group

Pull arm64 fixes from Will Deacon:
 "Here's the weekly batch of fixes for arm64. Not an awful lot here, but
  there are still a few unresolved issues relating to CPU hotplug, RCU
  and IRQ tracing that I hope to queue fixes for next week.

  Summary:

   - Fix early use of kprobes

   - Fix kernel placement in kexec_file_load()

   - Bump maximum number of NUMA nodes"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: kexec_file: try more regions if loading segments fails
  arm64: kprobes: Use BRK instead of single-step when executing instructions out-of-line
  arm64: NUMA: Kconfig: Increase NODES_SHIFT to 4

Pull ARC fixes from Vineet Gupta:

 - Unbork HSDKv1 platform (won't boot) due to memory map issue

 - Prevent stack unwinder from infinite looping

* tag 'arc-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  ARC: [plat-hsdk] Remap CCMs super early in asm boot trampoline
  ARC: stack unwinding: avoid indefinite looping

Pull s390 fixes from Heiko Carstens:

 - fix reference counting for ap devices

 - fix paes selftest

 - fix pmd_deref()/pud_deref() so they can also handle large pages

 - remove unused vdso file and defines

 - update defconfigs

 - call rcu_cpu_starting() early in smp init code to avoid lockdep
   warnings

 - fix hotplug of PCI function missing bus

* tag 's390-5.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/pci: fix hot-plug of PCI function missing bus
  s390/smp: move rcu_cpu_starting() earlier
  s390/pkey: fix paes selftest failure with paes and pkey static build
  s390: update defconfigs
  s390/vdso: remove unused constants
  s390/vdso: remove empty unused file
  s390/mm: make pmd/pud_deref() large page aware
  s390/ap: fix ap devices reference counting

Pull networking fixes from Jakub Kicinski:
 "Networking fixes for 5.10-rc3, including fixes from wireless, can, and
  netfilter subtrees.

  Current merge window - bugs in new features:

   - can: isotp: isotp_rcv_cf(): enable RX timeout handling in
     listen-only mode

  Previous releases - regressions:

   - mac80211:
      - don't require VHT elements for HE on 2.4 GHz
      - fix regression where EAPOL frames were sent in plaintext

   - netfilter:
      - ipset: Update byte and packet counters regardless of whether
        they match

   - ip_tunnel: fix over-mtu packet send by allowing fragmenting even if
     inner packet has IP_DF (don't fragment) set in its header (when
     TUNNEL_DONT_FRAGMENT flag is not set on the tunnel dev)

   - net: fec: fix MDIO probing for some FEC hardware blocks

   - ip6_tunnel: set inner ipproto before ip6_tnl_encap to un-break gso
     support

   - sctp: Fix COMM_LOST/CANT_STR_ASSOC err reporting on big-endian
     platforms, sparse-related fix used the wrong integer size

  Previous releases - always broken:

   - netfilter: use actual socket sk rather than skb sk when routing
     harder

   - r8169: work around short packet hw bug on RTL8125 by padding frames

   - net: ethernet: ti: cpsw: disable PTPv1 hw timestamping
     advertisement, the hardware does not support it

   - chelsio/chtls: fix always leaking ctrl_skb and another leak caused
     by a race condition

   - fix drivers incorrectly writing into skbs on TX:
      - cadence: force nonlinear buffers to be cloned
      - gianfar: Account for Tx PTP timestamp in the skb headroom
      - gianfar: Replace skb_realloc_headroom with skb_cow_head for PTP

   - can: flexcan:
      - remove FLEXCAN_QUIRK_DISABLE_MECR quirk for LS1021A
      - add ECC initialization for VF610 and LX2160A
      - flexcan_remove(): disable wakeup completely

   - can: fix packet echo functionality:
      - peak_canfd: fix echo management when loopback is on
      - make sure skbs are not freed in IRQ context in case they need to
        be dropped
      - always clone the skbs to make sure they have a reference on the
        socket, and prevent it from disappearing
      - fix real payload length return value for RTR frames

   - can: j1939: return failure on bind if netdev is down, rather than
     waiting indefinitely

  Misc:

   - IPv6: reply ICMP error if the first fragment don't include all
     headers to improve compliance with RFC 8200"

* tag 'net-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (66 commits)
  ionic: check port ptr before use
  r8169: work around short packet hw bug on RTL8125
  net: openvswitch: silence suspicious RCU usage warning
  chelsio/chtls: fix always leaking ctrl_skb
  chelsio/chtls: fix memory leaks caused by a race
  can: flexcan: flexcan_remove(): disable wakeup completely
  can: flexcan: add ECC initialization for VF610
  can: flexcan: add ECC initialization for LX2160A
  can: flexcan: remove FLEXCAN_QUIRK_DISABLE_MECR quirk for LS1021A
  can: mcp251xfd: remove unneeded break
  can: mcp251xfd: mcp251xfd_regmap_nocrc_read(): fix semicolon.cocci warnings
  can: mcp251xfd: mcp251xfd_regmap_crc_read(): increase severity of CRC read error messages
  can: peak_canfd: pucan_handle_can_rx(): fix echo management when loopback is on
  can: peak_usb: peak_usb_get_ts_time(): fix timestamp wrapping
  can: peak_usb: add range checking in decode operations
  can: xilinx_can: handle failure cases of pm_runtime_get_sync
  can: ti_hecc: ti_hecc_probe(): add missed clk_disable_unprepare() in error path
  can: isotp: padlen(): make const array static, makes object smaller
  can: isotp: isotp_rcv_cf(): enable RX timeout handling in listen-only mode
  can: isotp: Explain PDU in CAN_ISOTP help text
  ...

Mimic the pre-existing ACPI and Device Tree event log behavior by not
creating the binary_bios_measurements file when the EFI TPM event log is
empty.

This fixes the following NULL pointer dereference that can occur when
reading /sys/kernel/security/tpm0/binary_bios_measurements after the
kernel received an empty event log from the firmware:

 BUG: kernel NULL pointer dereference, address: 000000000000002c
 #PF: supervisor read access in kernel mode
 #PF: error_code(0x0000) - not-present page
 PGD 0 P4D 0
 Oops: 0000 [#1] SMP PTI
 CPU: 2 PID: 3932 Comm: fwupdtpmevlog Not tainted 5.9.0-00003-g629990edad62 #17
 Hardware name: LENOVO 20LCS03L00/20LCS03L00, BIOS N27ET38W (1.24 ) 11/28/2019
 RIP: 0010:tpm2_bios_measurements_start+0x3a/0x550
 Code: 54 53 48 83 ec 68 48 8b 57 70 48 8b 1e 65 48 8b 04 25 28 00 00 00 48 89 45 d0 31 c0 48 8b 82 c0 06 00 00 48 8b 8a c8 06 00 00 <44> 8b 60 1c 48 89 4d a0 4c 89 e2 49 83 c4 20 48 83 fb 00 75 2a 49
 RSP: 0018:ffffa9c901203db0 EFLAGS: 00010246
 RAX: 0000000000000010 RBX: 0000000000000000 RCX: 0000000000000010
 RDX: ffff8ba1eb99c000 RSI: ffff8ba1e4ce8280 RDI: ffff8ba1e4ce8258
 RBP: ffffa9c901203e40 R08: ffffa9c901203dd8 R09: ffff8ba1ec443300
 R10: ffffa9c901203e50 R11: 0000000000000000 R12: ffff8ba1e4ce8280
 R13: ffffa9c901203ef0 R14: ffffa9c901203ef0 R15: ffff8ba1e4ce8258
 FS:  00007f6595460880(0000) GS:ffff8ba1ef880000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 000000000000002c CR3: 00000007d8d18003 CR4: 00000000003706e0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 Call Trace:
  ? __kmalloc_node+0x113/0x320
  ? kvmalloc_node+0x31/0x80
  seq_read+0x94/0x420
  vfs_read+0xa7/0x190
  ksys_read+0xa7/0xe0
  __x64_sys_read+0x1a/0x20
  do_syscall_64+0x37/0x80
  entry_SYSCALL_64_after_hwframe+0x44/0xa9

In this situation, the bios_event_log pointer in the tpm_bios_log struct
was not NULL but was equal to the ZERO_SIZE_PTR (0x10) value. This was
due to the following kmemdup() in tpm_read_log_efi():

int tpm_read_log_efi(struct tpm_chip *chip)
{
...
	/* malloc EventLog space */
	log->bios_event_log = kmemdup(log_tbl->log, log_size, GFP_KERNEL);
	if (!log->bios_event_log) {
		ret = -ENOMEM;
		goto out;
	}
...
}

When log_size is zero, due to an empty event log from firmware,
ZERO_SIZE_PTR is returned from kmemdup(). Upon a read of the
binary_bios_measurements file, the tpm2_bios_measurements_start()
function does not perform a ZERO_OR_NULL_PTR() check on the
bios_event_log pointer before dereferencing it.

Rather than add a ZERO_OR_NULL_PTR() check in functions that make use of
the bios_event_log pointer, simply avoid creating the
binary_bios_measurements_file as is done in other event log retrieval
backends.

Explicitly ignore all of the events in the final event log when the main
event log is empty. The list of events in the final event log cannot be
accurately parsed without referring to the first event in the main event
log (the event log header) so the final event log is useless in such a
situation.

Fixes: 58cc1e4f ("tpm: parse TPM event logs based on EFI table")
Link: https://lore.kernel.org/linux-integrity/E1FDCCCB-CA51-4AEE-AC83-9CDE995EAE52@canonical.com/Reported-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reported-by: Kenneth R. Crudup <kenny@panix.com>
Reported-by: Mimi Zohar <zohar@linux.ibm.com>
Cc: Thiébaud Weksteen <tweek@google.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>

There is a misconfiguration in the bios of the gpio pin used for the
interrupt in the T490s. When interrupts are enabled in the tpm_tis
driver code this results in an interrupt storm. This was initially
reported when we attempted to enable the interrupt code in the tpm_tis
driver, which previously wasn't setting a flag to enable it. Due to
the reports of the interrupt storm that code was reverted and we went back
to polling instead of using interrupts. Now that we know the T490s problem
is a firmware issue, add code to check if the system is a T490s and
disable interrupts if that is the case. This will allow us to enable
interrupts for everyone else. If the user has a fixed bios they can
force the enabling of interrupts with tpm_tis.interrupts=1 on the
kernel command line.

Cc: Peter Huewe <peterhuewe@gmx.de>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>

Removing the duplicate gpio chip select level handling in
bcm2835_spi_setup() left the lflags variable uninitialized. Avoid trhe
use of such variable by passing default flags to
gpiochip_request_own_desc().

Fixes: 5e31ba0c ("spi: bcm2835: fix gpio cs level inversion")
Signed-off-by: Martin Hundebøll <martin@geanix.com>
Link: https://lore.kernel.org/r/20201105090615.620315-1-martin@geanix.comSigned-off-by: Mark Brown <broonie@kernel.org>

Zero-fill element values for all other cpus than current, just as
when not using prealloc. This is the only way the bpf program can
ensure known initial values for all cpus ('onallcpus' cannot be
set when coming from the bpf program).

The scenario is: bpf program inserts some elements in a per-cpu
map, then deletes some (or userspace does). When later adding
new elements using bpf_map_update_elem(), the bpf program can
only set the value of the new elements for the current cpu.
When prealloc is enabled, previously deleted elements are re-used.
Without the fix, values for other cpus remain whatever they were
when the re-used entry was previously freed.

A selftest is added to validate correct operation in above
scenario as well as in case of LRU per-cpu map element re-use.

Fixes: 6c905981 ("bpf: pre-allocate hash map elements")
Signed-off-by: David Verbeiren <david.verbeiren@tessares.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20201104112332.15191-1-david.verbeiren@tessares.net

Some patches for vc4 to fix some resources cleanup issues, two fixes for
panfrost for madvise and the shrinker and a constification of fonts
structure
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20201105101354.socyu26jwyns7lfj@gilmour.lan

Fix build error when BPF_SYSCALL is not set/enabled but BPF_PRELOAD is
by making BPF_PRELOAD depend on BPF_SYSCALL.

ERROR: modpost: "bpf_preload_ops" [kernel/bpf/preload/bpf_preload.ko] undefined!
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201105195109.26232-1-rdunlap@infradead.org

My earlier patch to reject non-zero arguments to flow dissector attach
broke attaching via bpftool. Instead of 0 it uses -1 for target_fd.
Fix this by passing a zero argument when attaching the flow dissector.

Fixes: 1b514239 ("bpf: flow_dissector: Check value of unused flags to BPF_PROG_ATTACH")
Reported-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20201105115230.296657-1-lmb@cloudflare.com

Merge tag 'amd-drm-fixes-5.10-2020-11-04' of git://people.freedesktop.org/~agd5f/linux into drm-fixes

amd-drm-fixes-5.10-2020-11-04:

amdgpu:
- Add support for more navi1x SKUs
- Fix for suspend on CI dGPUs
- VCN DPG fix for Picasso
- Sienna Cichlid fixes
- Polaris DPM fix
- Add support for Green Sardine

amdkfd:
- Fix an allocation failure check

MAINTAINERS:
- Fix path for amdgpu power management
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201104205741.4100-1-alexander.deucher@amd.com

Merge tag 'drm-intel-fixes-2020-11-05' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

- GVT fixes including vGPU suspend/resume fixes and workaround for APL guest GPU hang.
- Fix set domain's cache coherency (Chris)
- Fixes around breadcrumbs (Chris)
- Fix encoder lookup during PSR atomic (Imre)
- Hold onto an explicit ref to i915_vma_work.pinned (Chris)
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201105173026.GA858446@intel.com

drm/imx: fixes and cleanups

Remove unused functions and empty callbacks, let the dw_hdmi-imx driver
reuse imx_drm_encoder_parse_of() instead of reimplementing it, replace
the custom register spinlock with the regmap default spinlock and remove
redundant tracking of enabled state in imx-tve, drop the explicit
drm_mode_config_cleanup() call in imx-drm-core, reduce the scope of edid
length variables that are not otherwise used in imx-ldb and
parallel-display, fix a memory leak in the parallel-display bind error
path, and drop an extraneous type qualifier from of_get_tve_mode().
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/7e4af582027bbec269364b95f6978d061b48271a.camel@pengutronix.de

It's possible that the first region picked for the new kernel will make
it impossible to fit the other segments in the required 32GB window,
especially if we have a very large initrd.

Instead of giving up, we can keep testing other regions for the kernel
until we find one that works.
Suggested-by: Ryan O'Leary <ryanoleary@google.com>
Signed-off-by: Benjamin Gwin <bgwin@google.com>
Link: https://lore.kernel.org/r/20201103201106.2397844-1-bgwin@google.comSigned-off-by: Will Deacon <will@kernel.org>

rq->xdp_prog is RCU-protected and should be accessed only with
rcu_access_pointer for the NULL check in mlx5e_poll_rx_cq.

rq->xdp_prog may change on the fly only from one non-NULL value to
another non-NULL value, so the checks in mlx5e_xdp_handle and
mlx5e_poll_rx_cq will have the same result during one NAPI cycle,
meaning that no additional synchronization is needed.

Fixes: fe45386a ("net/mlx5e: Use RCU to protect rq->xdp_prog")
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>