Relocate intel_dsb_dewake_scanline() and dsb_chicken() upwards
in the file. I need to reuse these while emitting DSB
commands, and I'd like to keep the DSB command emission
stuff more or less grouped together in the file.

Also drop the intel_ prefix from intel_dsb_dewake_scanline() since
it's all internal stuff and thus doesn't need so much namespacing.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240624191032.27333-6-ville.syrjala@linux.intel.comReviewed-by: Animesh manna <animesh.manna@intel.com>

Currently we switch from out software idea of a scanline
to the hw's idea of a scanline during the commit phase in
_intel_dsb_commit(). While that is slightly easier due to
fastsets fiddling with the timings, we'll also need to
generate proper hw scanline numbers already when emitting
DSB scanline wait instructions. So this approach won't
do in the future. Switch to hw scanline numbers earlier.

Also intel_dsb_dewake_scanline() itself already makes
some assumptions about VRR that don't take into account
VRR toggling during fastsets, so technically delaying
the sw->hw conversion doesn't even help us.

The other reason for delaying the conversion was that we
are using intel_get_crtc_scanline() during intel_dsb_commit()
which gives us the current sw scanline. But this is pretty
low level stuff anyway so just using raw PIPEDSL reads seems
fine here, and that of course gives us the hw scanline
directly, reducing the need to do so many conversions.

v2: Return the non-hw scanline from intel_dsb_dewake_scanline()
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240624191032.27333-5-ville.syrjala@linux.intel.com

Enable all DSB error/fault interrupts so that we can see if
anything goes terribly wrong.

v2: Pass intel_display to DISPLAY_VER() (Jani)
    Drop extra '/' from drm_err() for consistency
v3: Reorder the irq handler a bit

Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240625135852.13431-1-ville.syrjala@linux.intel.comReviewed-by: Animesh Manna <animesh.manna@intel.com>

On ilk/snb the pipe may be configured to place the LUT before or
after the CSC depending on various factors, but as there is only
one LUT (no split mode like on IVB+) we only advertise a gamma_lut
and no degamma_lut in the uapi to avoid confusing userspace.

This can cause a problem during readout if the VBIOS/GOP enabled
the LUT in the pre CSC configuration. The current code blindly
assigns the results of the readout to the degamma_lut, which will
cause a failure during the next atomic_check() as we aren't expecting
anything to be in degamma_lut since it's not visible to userspace.

Fix the problem by assigning whatever LUT we read out from the
hardware into gamma_lut.

Cc: stable@vger.kernel.org
Fixes: d2559299 ("drm/i915: Make ilk_read_luts() capable of degamma readout")
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/11608Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240710124137.16773-1-ville.syrjala@linux.intel.comReviewed-by: Uma Shankar <uma.shankar@intel.com>

For CCS formats on affected platforms, CCS can be used freely, but
display engine requires a multiple of 64k physical pages. No other
changes are needed.

At the BO creation time we don't know if the BO will be used for CCS
or not. If the scanout flag is set, and the BO is a multiple of 64k,
we take the safe route and force the physical alignment of 64k pages.

If the BO is not a multiple of 64k, or the scanout flag was not set
at BO creation, we reject it for usage as CCS in display. The physical
pages are likely not aligned correctly, and this will cause corruption
when used as FB.

The scanout flag and size being a multiple of 64k are used together
to enforce 64k physical placement.

VM_BIND is completely unaffected, mappings to a VM can still be aligned
to 4k, just like for normal buffers.
Signed-off-by: Zbigniew Kempczyński <zbigniew.kempczynski@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Juha-Pekka Heikkilä <juha-pekka.heikkila@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240826170117.327709-3-maarten.lankhorst@linux.intel.comSigned-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Some plane formats have been designed to require 64k physical alignment.
By returning whether this is the case for certain formats, we do not
need to hardcode this check inside Xe.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Zbigniew Kempczyński <zbigniew.kempczynski@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240826170117.327709-2-maarten.lankhorst@linux.intel.comSigned-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Need to take some Xe bo definition in here before
we can add the BMG display 64k aligned size restrictions.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge tag 'amd-drm-next-6.12-2024-08-26' of https://gitlab.freedesktop.org/agd5f/linux into drm-next

amd-drm-next-6.12-2024-08-26:

amdgpu:
- SDMA devcoredump support
- DCN 4.0.1 updates
- DC SUBVP fixes
- Refactor OPP in DC
- Refactor MMHUBBUB in DC
- DC DML 2.1 updates
- DC FAMS2 updates
- RAS updates
- GFX12 updates
- VCN 4.0.3 updates
- JPEG 4.0.3 updates
- Enable wave kill (soft recovery) for compute queues
- Clean up CP error interrupt handling
- Enable CP bad opcode interrupts
- VCN 4.x fixes
- VCN 5.x fixes
- GPU reset fixes
- Fix vbios embedded EDID size handling
- SMU 14.x updates
- Misc code cleanups and spelling fixes
- VCN devcoredump support
- ISP MFD i2c support
- DC vblank fixes
- GFX 12 fixes
- PSR fixes
- Convert vbios embedded EDID to drm_edid
- DCN 3.5 updates
- DMCUB updates
- Cursor fixes
- Overdrive support for SMU 14.x
- GFX CP padding optimizations
- DCC fixes
- DSC fixes
- Preliminary per queue reset infrastructure
- Initial per queue reset support for GFX 9
- Initial per queue reset support for GFX 7, 8
- DCN 3.2 fixes
- DP MST fixes
- SR-IOV fixes
- GFX 9.4.3/4 devcoredump support
- Add process isolation framework
- Enable process isolation support for GFX 9.4.3/4
- Take IOMMU remapping into account for P2P DMA checks

amdkfd:
- CRIU fixes
- Improved input validation for user queues
- HMM fix
- Enable process isolation support for GFX 9.4.3/4
- Initial per queue reset support for GFX 9
- Allow users to target recommended SDMA engines

radeon:
- remove .load and drm_dev_alloc
- Fix vbios embedded EDID size handling
- Convert vbios embedded EDID to drm_edid
- Use GEM references instead of TTM
- r100 cp init cleanup
- Fix potential overflows in evergreen CS offset tracking

UAPI:
- KFD support for targetting queues on recommended SDMA engines
  Proposed userspace:
  https://github.com/ROCm/ROCR-Runtime/commit/2f588a24065f41c208c3701945e20be746d8faf7
  https://github.com/ROCm/ROCR-Runtime/commit/eb30a5bbc7719c6ffcf2d2dd2878bc53a47b3f30

drm/buddy:
- Add start address support for trim function

From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240826201528.55307-1-alexander.deucher@amd.com

amdgpu pr conconflicts due to patches cherry-picked to -fixes, I might
as well catch up with a backmerge and handle them all. Plus both misc
and intel maintainers asked for a backmerge anyway.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Merge tag 'drm-intel-gt-next-2024-08-23' of https://gitlab.freedesktop.org/drm/i915/kernel into drm-next

UAPI Changes:

- Limit the number of relocations to INT_MAX (Tvrtko)

  Only impact should be synthetic tests.

Driver Changes:

- Fix for #11396: GPU Hang and rcs0 reset on Cherrytrail platform
- Fix Virtual Memory mapping boundaries calculation (Andi)
- Fix for #11255: Long hangs in buddy allocator with DG2/A380 without
  Resizable BAR since 6.9 (David)
- Mark the GT as dead when mmio is unreliable (Chris, Andi)
- Workaround additions / fixes for MTL, ARL and DG2 (John H, Nitin)
- Enable partial memory mapping of GPU virtual memory (Andi, Chris)

- Prevent NULL deref on intel_memory_regions_hw_probe (Jonathan, Dan)
- Avoid UAF on intel_engines_release (Krzysztof)

- Don't update PWR_CLK_STATE starting Gen12 (Umesh)
- Code and dmesg cleanups (Andi, Jesus, Luca)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZshcfSqgfnl8Mh4P@jlahtine-mobl.ger.corp.intel.com

Merge tag 'drm-misc-next-2024-08-22' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next

drm-misc-next for v6.12:

Cross-subsystem Changes:

string:
- add mem_is_zero()

Core Changes:

edid:
- use mem_is_zero()

Driver Changes:

ast:
- reorganize output code by type (VGA, DP, etc)
- convert to struct drm_edid
- fix BMC handling for all outputs

bridge:
- anx7625: simplify OF array handling
- dw-hdmi: simplify clock handling
- lontium-lt8912b: fix mode validation
- nwl-dsi: fix mode vsync/hsync polarity

panel:
- ili9341: fix comments
- jd9365da: fix "exit sleep" commands
- jdi-fhd-r63452: simplify error handling with DSI multi-style
  helpers
- mantix-mlaf057we51: simplify error handling with DSI multi-style
  helpers
- simple: support Innolux G070ACE-LH3 plus DT bindings; support
  On Tat Industrial Company KD50G21-40NT-A1 plus DT bindings
- st7701: decouple DSI and DRM code; add SPI support; support Anbernic
  RG28XX plus DT bindings

vc4:
- fix PM during detect
- replace DRM_ERROR() with drm_error()
- v3d: simplify clock retrieval
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240822150710.GA243952@localhost.localdomain

ARL and MTL share a single GSC firmware blob. However, ARL requires a
newer version of it.

So add differentiate of the PCI ids for ARL from MTL and create ARL as
a sub-platform of MTL. That way, all the existing workarounds and such
still treat ARL as MTL exactly as before. However, now the GSC code
can check for ARL and do an extra version check on the firmware before
committing to it.

Also, the version extraction code has various ways of failing but the
return code was being ignore and so the firmware load would attempt to
continue anyway. Fix that by propagating the return code to the next
level out.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Fixes: 213c4367 ("drm/i915/mtl: Remove the 'force_probe' requirement for Meteor Lake")
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240802031051.3816392-1-John.C.Harrison@Intel.comSigned-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

In some cases the sink can reset itself after it was configured into MST
mode, without the driver noticing the disconnected state. For instance
the reset may happen in the middle of a modeset, or the (long) HPD pulse
generated may be not long enough for the encoder detect handler to
observe the HPD's deasserted state. In this case the sink's DPCD
register programmed to enable MST will be reset, while the driver still
assumes MST is still enabled. Detect this condition, which will tear
down and recreate/re-enable the MST topology.

v2:
- Add a code comment about adjusting the expected DP_MSTM_CTRL register
  value for SST + SideBand. (Suraj, Jani)
- Print a debug message about detecting the link reset. (Jani)
- Verify the DPCD MST state only if it wasn't already determined that
  the sink is disconnected.

Cc: stable@vger.kernel.org
Cc: Jani Nikula <jani.nikula@intel.com>
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/11195
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> (v1)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240823162918.1211875-1-imre.deak@intel.com

The basedie step initialization as well as its last users were removed
in commit 326e30e4 ("drm/i915: Drop dead code for pvc"). Follow
through with removing the unused macros and struct member and debug
logging.
Suggested-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240822143946.2526425-1-jani.nikula@intel.comSigned-off-by: Jani Nikula <jani.nikula@intel.com>

There are a number of leftover #include "display/..." directives that
are completely unnecessary. Remove them to make it easier to spot the
relevant ones. In one case, switch to a more specific include.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240823123318.3189503-1-jani.nikula@intel.comSigned-off-by: Jani Nikula <jani.nikula@intel.com>

Pull bcachefs fixes from Kent Overstreet:

 - assorted syzbot fixes

 - some upgrade fixes for old (pre 1.0) filesystems

 - fix for moving data off a device that was switched to durability=0
   after data had been written to it.

 - nocow deadlock fix

 - fix for new rebalance_work accounting

* tag 'bcachefs-2024-08-24' of git://evilpiepirate.org/bcachefs: (28 commits)
  bcachefs: Fix rebalance_work accounting
  bcachefs: Fix failure to flush moves before sleeping in copygc
  bcachefs: don't use rht_bucket() in btree_key_cache_scan()
  bcachefs: add missing inode_walker_exit()
  bcachefs: clear path->should_be_locked in bch2_btree_key_cache_drop()
  bcachefs: Fix double assignment in check_dirent_to_subvol()
  bcachefs: Fix refcounting in discard path
  bcachefs: Fix compat issue with old alloc_v4 keys
  bcachefs: Fix warning in bch2_fs_journal_stop()
  fs/super.c: improve get_tree() error message
  bcachefs: Fix missing validation in bch2_sb_journal_v2_validate()
  bcachefs: Fix replay_now_at() assert
  bcachefs: Fix locking in bch2_ioc_setlabel()
  bcachefs: fix failure to relock in btree_node_fill()
  bcachefs: fix failure to relock in bch2_btree_node_mem_alloc()
  bcachefs: unlock_long() before resort in journal replay
  bcachefs: fix missing bch2_err_str()
  bcachefs: fix time_stats_to_text()
  bcachefs: Fix bch2_bucket_gens_init()
  bcachefs: Fix bch2_trigger_alloc assert
  ...

Pull smb server fixes from Steve French:

 - query directory flex array fix

 - fix potential null ptr reference in open

 - fix error message in some open cases

 - two minor cleanups

* tag '6.11-rc5-server-fixes' of git://git.samba.org/ksmbd:
  smb/server: update misguided comment of smb2_allocate_rsp_buf()
  smb/server: remove useless assignment of 'file_present' in smb2_open()
  smb/server: fix potential null-ptr-deref of lease_ctx_info in smb2_open()
  smb/server: fix return value of smb2_open()
  ksmbd: the buffer of smb2 query dir response has at least 1 byte

Pull s390 fixes from Vasily Gorbik:

 - Fix KASLR base offset to account for symbol offsets in the vmlinux
   ELF file, preventing tool breakages like the drgn debugger

 - Fix potential memory corruption of physmem_info during kernel
   physical address randomization

 - Fix potential memory corruption due to overlap between the relocated
   lowcore and identity mapping by correctly reserving lowcore memory

 - Fix performance regression and avoid randomizing identity mapping
   base by default

 - Fix unnecessary delay of AP bus binding complete uevent to prevent
   startup lag in KVM guests using AP

* tag 's390-6.11-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/boot: Fix KASLR base offset off by __START_KERNEL bytes
  s390/boot: Avoid possible physmem_info segment corruption
  s390/ap: Refine AP bus bindings complete processing
  s390/mm: Pin identity mapping base to zero
  s390/mm: Prevent lowcore vs identity mapping overlap

Pull SCSI fixes from James Bottomley:
 "The important core fix is another tweak to our discard discovery
  issues. The off by 512 in logical block count seems bad, but in fact
  the inline was only ever used in debug prints, which is why no-one
  noticed"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: sd: Do not attempt to configure discard unless LBPME is set
  scsi: MAINTAINERS: Add header files to SCSI SUBSYSTEM
  scsi: ufs: qcom: Add UFSHCD_QUIRK_BROKEN_LSDBS_CAP for SM8550 SoC
  scsi: ufs: core: Add a quirk for handling broken LSDBS field in controller capabilities register
  scsi: core: Fix the return value of scsi_logical_block_count()
  scsi: MAINTAINERS: Update HiSilicon SAS controller driver maintainer

rebalance_work was keying off of the presence of rebelance_opts in the
extent - but that was incorrect, we keep those around after rebalance
for indirect extents since the inode's options are not directly
available

Fixes: 20ac515a ("bcachefs: bch_acct_rebalance_work")
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

This fixes an apparent deadlock - rebalance would get stuck trying to
take nocow locks because they weren't being released by copygc.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

There are 2G and 4G RAM versions of the Lenovo Yoga Tab 3 X90F and it
turns out that the 2G version has a DMI product name of
"CHERRYVIEW D1 PLATFORM" where as the 4G version has
"CHERRYVIEW C0 PLATFORM". The sys-vendor + product-version check are
unique enough that the product-name check is not necessary.

Drop the product-name check so that the existing DMI match for the 4G
RAM version also matches the 2G RAM version.

Fixes: f6f4a086 ("drm/i915/vlv_dsi: Add DMI quirk for backlight control issues on Lenovo Yoga Tab 3 (v2)")
Cc: stable@vger.kernel.org
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240823075055.17198-1-hdegoede@redhat.com

Pull cgroup fixes from Tejun Heo:
 "Three patches addressing cpuset corner cases"

* tag 'cgroup-for-6.11-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup/cpuset: Eliminate unncessary sched domains rebuilds in hotplug
  cgroup/cpuset: Clear effective_xcpus on cpus_allowed clearing only if cpus.exclusive not set
  cgroup/cpuset: fix panic caused by partcmd_update

Pull workqueue fixes from Tejun Heo:
 "Nothing too interesting. One patch to remove spurious warning and
  others to address static checker warnings"

* tag 'wq-for-6.11-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: Correct declaration of cpu_pwq in struct workqueue_struct
  workqueue: Fix spruious data race in __flush_work()
  workqueue: Remove incorrect "WARN_ON_ONCE(!list_empty(&worker->entry));" from dying worker
  workqueue: Fix UBSAN 'subtraction overflow' error in shift_and_mask()
  workqueue: doc: Fix function name, remove markers

Pull MIPS fixes from Thomas Bogendoerfer:

 - Set correct timer mode on Loongson64

 - Only request r4k clockevent interrupt on one CPU

* tag 'mips-fixes_6.11_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  MIPS: cevt-r4k: Don't call get_c0_compare_int if timer irq is installed
  MIPS: Loongson64: Set timer mode in cpu-probe

Pull arm64 kvm fixes from Catalin Marinas:

 - Don't drop references on LPIs that weren't visited by the vgic-debug
   iterator

 - Cure lock ordering issue when unregistering vgic redistributors

 - Fix for misaligned stage-2 mappings when VMs are backed by hugetlb
   pages

 - Treat SGI registers as UNDEFINED if a VM hasn't been configured for
   GICv3

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  KVM: arm64: Make ICC_*SGI*_EL1 undef in the absence of a vGICv3
  KVM: arm64: Ensure canonical IPA is hugepage-aligned when handling fault
  KVM: arm64: vgic: Don't hold config_lock while unregistering redistributors
  KVM: arm64: vgic-debug: Don't put unmarked LPIs

Pull NFS client fixes from Anna Schumaker:

 - Fix rpcrdma refcounting in xa_alloc

 - Fix rpcrdma usage of XA_FLAGS_ALLOC

 - Fix requesting FATTR4_WORD2_OPEN_ARGUMENTS

 - Fix attribute bitmap decoder to handle a 3rd word

 - Add reschedule points when returning delegations to avoid soft lockups

 - Fix clearing layout segments in layoutreturn

 - Avoid unnecessary rescanning of the per-server delegation list

* tag 'nfs-for-6.11-2' of git://git.linux-nfs.org/projects/anna/linux-nfs:
  NFS: Avoid unnecessary rescanning of the per-server delegation list
  NFSv4: Fix clearing of layout segments in layoutreturn
  NFSv4: Add missing rescheduling points in nfs_client_return_marked_delegations
  nfs: fix bitmap decoder to handle a 3rd word
  nfs: fix the fetch of FATTR4_OPEN_ARGUMENTS
  rpcrdma: Trace connection registration and unregistration
  rpcrdma: Use XA_FLAGS_ALLOC instead of XA_FLAGS_ALLOC1
  rpcrdma: Device kref is over-incremented on error from xa_alloc

Pull smb client fixes from Steve French:

 - fix refcount leak (can cause rmmod fail)

 - fix byte range locking problem with cached reads

 - fix for mount failure if reparse point unrecognized

 - minor typo

* tag 'v6.11-rc4-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  smb/client: fix typo: GlobalMid_Sem -> GlobalMid_Lock
  smb: client: ignore unhandled reparse tags
  smb3: fix problem unloading module due to leaked refcount on shutdown
  smb3: fix broken cached reads when posix locks

Pull input fixes from Dmitry Torokhov:

 - a tweak to uinput interface to reject requests with abnormally large
   number of slots. 100 slots/contacts should be enough for real devices

 - support for FocalTech FT8201 added to the edt-ft5x06 driver

 - tweaks to i8042 to handle more devices that have issue with its
   emulation

 - Synaptics touchpad switched to native SMbus/RMI mode on HP Elitebook
   840 G2

 - other minor fixes

* tag 'input-for-v6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: himax_hx83112b - fix incorrect size when reading product ID
  Input: i8042 - use new forcenorestore quirk to replace old buggy quirk combination
  Input: i8042 - add forcenorestore quirk to leave controller untouched even on s3
  Input: i8042 - add Fujitsu Lifebook E756 to i8042 quirk table
  Input: uinput - reject requests with unreasonable number of slots
  Input: edt-ft5x06 - add support for FocalTech FT8201
  dt-bindings: input: touchscreen: edt-ft5x06: Document FT8201 support
  Input: adc-joystick - fix optional value handling
  Input: synaptics - enable SMBus for HP Elitebook 840 G2
  Input: ads7846 - ratelimit the spi_sync error message

Pull drm fixes from Dave Airlie:
 "Weekly fixes. xe and msm are the major groups, with
  amdgpu/i915/nouveau having smaller bits. xe has a bunch of hw
  workaround fixes that were found to be missing, so that is why there
  are a bunch of scattered fixes, and one larger one. But overall size
  doesn't look too out of the ordinary.

  msm:
   - virtual plane fixes:
      - drop yuv on hw where not supported
      - csc vs yuv format fix
      - rotation fix
   - fix fb cleanup on close
   - reset phy before link training
   - fix visual corruption at 4K
   - fix NULL ptr crash on hotplug
   - simplify debug macros
   - sc7180 fix
   - adreno firmware name error path fix

  amdgpu:
   - GFX10 firmware loading fix
   - SDMA 5.2 fix
   - Debugfs parameter validation fix
   - eGPU hotplug fix

  i915:
   - fix HDCP timeouts

  nouveau:
   - fix SG_DEBUG crash

  xe:
   - Fix OA format masks which were breaking build with gcc-5
   - Fix opregion leak (Lucas)
   - Fix OA sysfs entry (Ashutosh)
   - Fix VM dma-resv lock (Brost)
   - Fix tile fini sequence (Brost)
   - Prevent UAF around preempt fence (Auld)
   - Fix DGFX display suspend/resume (Maarten)
   - Many Xe/Xe2 critical workarounds (Auld, Ngai-Mint, Bommu, Tejas, Daniele)
   - Fix devm/drmm issues (Daniele)
   - Fix missing workqueue destroy in xe_gt_pagefault (Stuart)
   - Drop HW fence pointer to HW fence ctx (Brost)
   - Free job before xe_exec_queue_put (Brost)"

* tag 'drm-fixes-2024-08-24' of https://gitlab.freedesktop.org/drm/kernel: (35 commits)
  drm/xe: Free job before xe_exec_queue_put
  drm/xe: Drop HW fence pointer to HW fence ctx
  drm/xe: Fix missing workqueue destroy in xe_gt_pagefault
  drm/amdgpu: fix eGPU hotplug regression
  drm/amdgpu: Validate TA binary size
  drm/amdgpu/sdma5.2: limit wptr workaround to sdma 5.2.1
  drm/amdgpu: fixing rlc firmware loading failure issue
  drm/xe/uc: Use devm to register cleanup that includes exec_queues
  drm/xe: use devm instead of drmm for managed bo
  drm/xe/xe2hpg: Add Wa_14021821874
  drm/xe: fix WA 14018094691
  drm/xe/xe2: Add Wa_15015404425
  drm/xe/xe2: Make subsequent L2 flush sequential
  drm/xe/xe2lpg: Extend workaround 14021402888
  drm/xe/xe2lpm: Extend Wa_16021639441
  drm/xe/bmg: implement Wa_16023588340
  drm/xe/oa/uapi: Make bit masks unsigned
  drm/xe/display: Make display suspend/resume work on discrete
  drm/xe: prevent UAF around preempt fence
  drm/xe: Fix tile fini sequence
  ...

Pull block fixes from Jens Axboe:

 - NVMe pull request via Keith
     - Remove unused struct field (Nilay)
     - Fix fabrics keep-alive teardown order (Ming)

 - Write zeroes fixes (John)

* tag 'block-6.11-20240823' of git://git.kernel.dk/linux:
  nvme: Remove unused field
  nvme: move stopping keep-alive into nvme_uninit_ctrl()
  block: Drop NULL check in bdev_write_zeroes_sectors()
  block: Read max write zeroes once for __blkdev_issue_write_zeroes()

Pull io_uring fix from Jens Axboe:
 "Just a single fix for provided buffer validation"

* tag 'io_uring-6.11-20240823' of git://git.kernel.dk/linux:
  io_uring/kbuf: sanitize peek buffer setup

Pull ACPI fix from Rafael Wysocki:
 "Fix backlight control on a Dell All In One system where a backlight
  controller board is attached to a UART port and the dell-uart
  backlight driver binds to it, but the backlight is actually controlled
  by other means (Hans de Goede)"

* tag 'acpi-6.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: video: Add backlight=native quirk for Dell OptiPlex 7760 AIO
  platform/x86: dell-uart-backlight: Use acpi_video_get_backlight_type()
  ACPI: video: Add Dell UART backlight controller detection

Pull thermal control fixes from Rafael Wysocki:
 "These fix error handling in the thermal debug code and OF node
  reference leaks in the thermal OF driver.

  Specifics:

   - Use IS_ERR() in checks of debugfs_create_dir() return value instead
     of checking it against NULL in the thermal debug code (Yang Ruibin)

   - Fix three OF node reference leaks in thermal_of (Krzysztof
     Kozlowski)"

* tag 'thermal-6.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  thermal: of: Fix OF node leak in of_thermal_zone_find() error paths
  thermal: of: Fix OF node leak in thermal_of_zone_register()
  thermal: of: Fix OF node leak in thermal_of_trips_init() error path
  thermal/debugfs: Fix the NULL vs IS_ERR() confusion in debugfs_create_dir()

Pull mmc fixes from Ulf Hansson:
 "MMC core:
   - Fix NULL dereference for mmc_test on allocation failure

  MMC host:
   - dw_mmc: Fix support for deferred probe for biu/ciu clocks
   - mtk-sd: Fix CMD8 support when fragile tuning settings"

* tag 'mmc-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: mmc_test: Fix NULL dereference on allocation failure
  mmc: dw_mmc: allow biu and ciu clocks to defer
  mmc: mtk-sd: receive cmd8 data when hs400 tuning fail

Pull spi fixes from Mark Brown:
 "A small collection of fixes here, all driver specific and none of them
  too serious. For whatever reason runtime PM seems to have been causing
  a bunch of issues recently"

* tag 'spi-fix-v6.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: pxa2xx: Move PM runtime handling to the glue drivers
  spi: pxa2xx: Do not override dev->platform_data on probe
  spi: spi-fsl-lpspi: limit PRESCALE bit in TCR register
  spi: spi-cadence-quadspi: Fix OSPI NOR failures during system resume
  spi: zynqmp-gqspi: Scale timeout by data size

Drop unsupported features on smu v14_0_2.
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

When app unmap vm ranges(munmap) kfd/svm starts drain pending page fault and
not handle any incoming pages fault of this process until a deferred work item
got executed by default system wq. The time period of "not handle page fault"
can be long and is unpredicable. That is advese to kfd performance on page
faults recovery.

This patch uses time stamp of incoming page fault to decide to drop or recover
page fault. When app unmap vm ranges kfd records each gpu device's ih ring
current time stamp. These time stamps are used at kfd page fault recovery
routine.

Any page fault happened on unmapped ranges after unmap events is application
bug that accesses vm range after unmap. It is not driver work to cover that.

By using time stamp of page fault do not need drain page faults at deferred
work. So, the time period that kfd does not handle page faults is reduced
and can be controlled.
Signed-off-by: Xiaogang.Chen <Xiaogang.Chen@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add p2s table support for a new revision of SMUv13.0.6.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>