- 14 Dec, 2015 1 commit
-
-
Luis Henriques authored
Signed-off-by:Luis Henriques <luis.henriques@canonical.com>
-
- 13 Dec, 2015 39 commits
-
-
David Howells authored
commit 102f4d90 upstream. Handle a write being requested to the page immediately beyond the EOF marker on a cache object. Currently this gets an assertion failure in CacheFiles because the EOF marker is used there to encode information about a partial page at the EOF - which could lead to an unknown blank spot in the file if we extend the file over it. The problem is actually in fscache where we check the index of the page being written against store_limit. store_limit is set to the number of pages that we're allowed to store by fscache_set_store_limit() - which means it's one more than the index of the last page we're allowed to store. The problem is that we permit writing to a page with an index _equal_ to the store limit - when we should reject that case. Whilst we're at it, change the triggered assertion in CacheFiles to just return -ENOBUFS instead. The assertion failure looks something like this: CacheFiles: Assertion failed 1000 < 7b1 is false ------------[ cut here ]------------ kernel BUG at fs/cachefiles/rdwr.c:962! ... RIP: 0010:[<ffffffffa02c9e83>] [<ffffffffa02c9e83>] cachefiles_write_page+0x273/0x2d0 [cachefiles] Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> [ kamal: backport to 3.13-stable: no __kernel_write(); thanks Ben H. ] Signed-off-by:
Kamal Mostafa <kamal@canonical.com> Signed-off-by:
-
Mathias Krause authored
commit 3824657c upstream. The following statement of ABI/testing/dev-kmsg is not quite right: It is not possible to inject messages from userspace with the facility number LOG_KERN (0), to make sure that the origin of the messages can always be reliably determined. Userland actually can inject messages with a facility of 0 by abusing the fact that the facility is stored in a u8 data type. By using a facility which is a multiple of 256 the assignment of msg->facility in log_store() implicitly truncates it to 0, i.e. LOG_KERN, allowing users of /dev/kmsg to spoof kernel messages as shown below: The following call... # printf '<%d>Kernel panic - not syncing: beer empty\n' 0 >/dev/kmsg ...leads to the following log entry (dmesg -x | tail -n 1): user :emerg : [ 66.137758] Kernel panic - not syncing: beer empty However, this call... # printf '<%d>Kernel panic - not syncing: beer empty\n' 0x800 >/dev/kmsg ...leads to the slightly different log entry (note the kernel facility): kern :emerg : [ 74.177343] Kernel panic - not syncing: beer empty Fix that by limiting the user provided facility to 8 bit right from the beginning and catch the truncation early. Fixes: 7ff9554b ("printk: convert byte-buffer to variable-length...") Signed-off-by:
Mathias Krause <minipli@googlemail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Petr Mladek <pmladek@suse.cz> Cc: Alex Elder <elder@linaro.org> Cc: Joe Perches <joe@perches.com> Cc: Kay Sievers <kay@vrfy.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> [ kamal: backport to 3.13-stable: retain local 'int i' ] Signed-off-by:
-
Takashi Iwai authored
commit cadd16ea upstream. We've had many reports that some Creative sound cards with CA0132 don't work well. Some reported that it starts working after reloading the module, while some reported it starts working when a 32bit kernel is used. All these facts seem implying that the chip fails to communicate when the buffer is located in 64bit address. This patch addresses these issues by just adding AZX_DCAPS_NO_64BIT flag to the corresponding PCI entries. I casually had a chance to test an SB Recon3D board, and indeed this seems helping. Although this hasn't been tested on all Creative devices, it's safer to assume that this restriction applies to the rest of them, too. So the flag is applied to all Creative entries. Signed-off-by:
Takashi Iwai <tiwai@suse.de> [ kamal: backport to 3.13-stable: context ] Signed-off-by:
-
Ingo Molnar authored
commit b2f73922 upstream. So the /proc/PID/stat 'wchan' field (the 30th field, which contains the absolute kernel address of the kernel function a task is blocked in) leaks absolute kernel addresses to unprivileged user-space: seq_put_decimal_ull(m, ' ', wchan); The absolute address might also leak via /proc/PID/wchan as well, if KALLSYMS is turned off or if the symbol lookup fails for some reason: static int proc_pid_wchan(struct seq_file *m, struct pid_namespace *ns, struct pid *pid, struct task_struct *task) { unsigned long wchan; char symname[KSYM_NAME_LEN]; wchan = get_wchan(task); if (lookup_symbol_name(wchan, symname) < 0) { if (!ptrace_may_access(task, PTRACE_MODE_READ)) return 0; seq_printf(m, "%lu", wchan); } else { seq_printf(m, "%s", symname); } return 0; } This isn't ideal, because for example it trivially leaks the KASLR offset to any local attacker: fomalhaut:~> printf "%016lx\n" $(cat /proc/$$/stat | cut -d' ' -f35) ffffffff8123b380 Most real-life uses of wchan are symbolic: ps -eo pid:10,tid:10,wchan:30,comm and procps uses /proc/PID/wchan, not the absolute address in /proc/PID/stat: triton:~/tip> strace -f ps -eo pid:10,tid:10,wchan:30,comm 2>&1 | grep wchan | tail -1 open("/proc/30833/wchan", O_RDONLY) = 6 There's one compatibility quirk here: procps relies on whether the absolute value is non-zero - and we can provide that functionality by outputing "0" or "1" depending on whether the task is blocked (whether there's a wchan address). These days there appears to be very little legitimate reason user-space would be interested in the absolute address. The absolute address is mostly historic: from the days when we didn't have kallsyms and user-space procps had to do the decoding itself via the System.map. So this patch sets all numeric output to "0" or "1" and keeps only symbolic output, in /proc/PID/wchan. ( The absolute sleep address can generally still be profiled via perf, by tasks with sufficient privileges. ) Reviewed-by:
Thomas Gleixner <tglx@linutronix.de> Acked-by:
Kees Cook <keescook@chromium.org> Acked-by:
Ingo Molnar <mingo@kernel.org> [ kamal: backport to 3.16-stable: proc_pid_wchan context ] Signed-off-by:
-
Kosuke Tatsukawa authored
commit e81107d4 upstream. My colleague ran into a program stall on a x86_64 server, where n_tty_read() was waiting for data even if there was data in the buffer in the pty. kernel stack for the stuck process looks like below. #0 [ffff88303d107b58] __schedule at ffffffff815c4b20 #1 [ffff88303d107bd0] schedule at ffffffff815c513e #2 [ffff88303d107bf0] schedule_timeout at ffffffff815c7818 #3 [ffff88303d107ca0] wait_woken at ffffffff81096bd2 #4 [ffff88303d107ce0] n_tty_read at ffffffff8136fa23 #5 [ffff88303d107dd0] tty_read at ffffffff81368013 #6 [ffff88303d107e20] __vfs_read at ffffffff811a3704 #7 [ffff88303d107ec0] vfs_read at ffffffff811a3a57 #8 [ffff88303d107f00] sys_read at ffffffff811a4306 #9 [ffff88303d107f50] entry_SYSCALL_64_fastpath at ffffffff815c86d7 There seems to be two problems causing this issue. First, in drivers/tty/n_tty.c, __receive_buf() stores the data and updates ldata->commit_head using smp_store_release() and then checks the wait queue using waitqueue_active(). However, since there is no memory barrier, __receive_buf() could return without calling wake_up_interactive_poll(), and at the same time, n_tty_read() could start to wait in wait_woken() as in the following chart. __receive_buf() n_tty_read() ------------------------------------------------------------------------ if (waitqueue_active(&tty->read_wait)) /* Memory operations issued after the RELEASE may be completed before the RELEASE operation has completed */ add_wait_queue(&tty->read_wait, &wait); ... if (!input_available_p(tty, 0)) { smp_store_release(&ldata->commit_head, ldata->read_head); ... timeout = wait_woken(&wait, TASK_INTERRUPTIBLE, timeout); ------------------------------------------------------------------------ The second problem is that n_tty_read() also lacks a memory barrier call and could also cause __receive_buf() to return without calling wake_up_interactive_poll(), and n_tty_read() to wait in wait_woken() as in the chart below. __receive_buf() n_tty_read() ------------------------------------------------------------------------ spin_lock_irqsave(&q->lock, flags); /* from add_wait_queue() */ ... if (!input_available_p(tty, 0)) { /* Memory operations issued after the RELEASE may be completed before the RELEASE operation has completed */ smp_store_release(&ldata->commit_head, ldata->read_head); if (waitqueue_active(&tty->read_wait)) __add_wait_queue(q, wait); spin_unlock_irqrestore(&q->lock,flags); /* from add_wait_queue() */ ... timeout = wait_woken(&wait, TASK_INTERRUPTIBLE, timeout); ------------------------------------------------------------------------ There are also other places in drivers/tty/n_tty.c which have similar calls to waitqueue_active(), so instead of adding many memory barrier calls, this patch simply removes the call to waitqueue_active(), leaving just wake_up*() behind. This fixes both problems because, even though the memory access before or after the spinlocks in both wake_up*() and add_wait_queue() can sneak into the critical section, it cannot go past it and the critical section assures that they will be serialized (please see "INTER-CPU ACQUIRING BARRIER EFFECTS" in Documentation/memory-barriers.txt for a better explanation). Moreover, the resulting code is much simpler. Latency measurement using a ping-pong test over a pty doesn't show any visible performance drop. Signed-off-by:
Kosuke Tatsukawa <tatsu@ab.jp.nec.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> [ luis: backported to 3.16: - always use wake_up_interruptible() instead of wake_up_interruptible_poll() - adjusted context ] Signed-off-by:
-
Maxim Sheviakov authored
commit 515c752d upstream. There was a typo in the original. bug: https://bugs.freedesktop.org/show_bug.cgi?id=92865Signed-off-by:
Maxim Sheviakov <mrader3940@yandex.ru> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Alex Deucher authored
commit 2b02ec79 upstream. Bug: https://bugs.freedesktop.org/show_bug.cgi?id=92260Signed-off-by:
-
Maxim Sheviakov authored
commit e7865479 upstream. Just adds the quirk for MSI R7 370 Armor 2X Bug: https://bugs.freedesktop.org/show_bug.cgi?id=91294Signed-off-by:
-
NeilBrown authored
commit 66eefe5d upstream. Calling e.g. blk_queue_max_hw_sectors() after calls to disk_stack_limits() discards the settings determined by disk_stack_limits(). So we need to make those calls first. Fixes: 199dc6ed ("md/raid0: update queue parameter in a safer location.") Reported-by:
Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by:
NeilBrown <neilb@suse.com> [ luis: backported to 3.16: adjusted context ] Signed-off-by:
-
NeilBrown authored
commit 199dc6ed upstream. When a (e.g.) RAID5 array is reshaped to RAID0, the updating of queue parameters (e.g. max number of sectors per bio) is done in the wrong place. It should be part of ->run, but it is actually part of ->takeover. This means it happens before level_store() calls: blk_set_stacking_limits(&mddev->queue->limits); and so it ineffective. This can lead to errors from underlying devices. So move all the relevant settings out of create_stripe_zones() and into raid0_run(). As this can lead to a bug-on it is suitable for any -stable kernel which supports reshape to RAID0. So 2.6.35 or later. As the bug has been present for five years there is no urgency, so no need to rush into -stable. Fixes: 9af204cf ("md: Add support for Raid5->Raid0 and Raid10->Raid0 takeover") Reported-by:
Yi Zhang <yizhan@redhat.com> Signed-off-by:
-
Max Filippov authored
commit 972c55bf upstream. Signed-off-by:
Max Filippov <jcmvbkbc@gmail.com> Signed-off-by:
-
Christophe JAILLET authored
commit eb8ed1eb upstream. Reference to the 'np' node is dropped before dereferencing the 'sizep' and 'basep' pointers, which could by then point to junk if the node has been freed. Refactor code to call 'of_node_put' later. Fixes: c5df3926 ("drivers/char/tpm: Add securityfs support for event log") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by:
Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by:
Peter Huewe <PeterHuewe@gmx.de> [ luis: backported to 3.16: adjusted context ] Signed-off-by:
-
Tero Kristo authored
commit 62c8c20a upstream. mcp794xx alarm registers must be written in BCD format. However, the alarm programming logic neglected this by adding one to the value after bin2bcd conversion has been already done, writing bad values to month register in case the alarm being set is in October. In this case, the alarm month value becomes 0x0a instead of the expected 0x10. Fix by moving the +1 addition within the bin2bcd call also. Fixes: 1d1945d2 ("drivers/rtc/rtc-ds1307.c: add alarm support for mcp7941x chips") Signed-off-by:
Tero Kristo <t-kristo@ti.com> Acked-by:
Nishanth Menon <nm@ti.com> Signed-off-by:
Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by:
-
Jay Vosburgh authored
commit 40baec22 upstream. Since commit 7d5cd2ce529b, when bond_enslave fails on devices that are not ARPHRD_ETHER, if needed, it resets the bonding device back to ARPHRD_ETHER by calling ether_setup. Unfortunately, ether_setup clobbers dev->flags, clearing IFF_UP if the bond device is up, leaving it in a quasi-down state without having actually gone through dev_close. For bonding, if any periodic work queue items are active (miimon, arp_interval, etc), those will remain running, as they are stopped by bond_close. At this point, if the bonding module is unloaded or the bond is deleted, the system will panic when the work function is called. This panic is resolved by calling dev_close on the bond itself prior to calling ether_setup. Cc: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
Jay Vosburgh <jay.vosburgh@canonical.com> Fixes: 7d5cd2ce ("bonding: correctly handle bonding type change on enslave failure") Acked-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Peter Feiner authored
commit 956959f6 upstream. The -i flag was incorrectly listed as a short flag for --no-inherit. It should have only been listed as a short flag for --input. This documentation error has existed since the --input flag was introduced in 6810fc91 (perf trace: Add option to analyze events in a file versus live). Signed-off-by:
Peter Feiner <pfeiner@google.com> Cc: David Ahern <dsahern@gmail.com> Link: http://lkml.kernel.org/r/1446657706-14518-1-git-send-email-pfeiner@google.com Fixes: 6810fc91 ("perf trace: Add option to analyze events in a file versus live") Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Michal Kubeček authored
commit ebac62fe upstream. Both tunnel6_protocol and tunnel46_protocol share the same error handler, tunnel6_err(), which traverses through tunnel6_handlers list. For ipip6 tunnels, we need to traverse tunnel46_handlers as we do e.g. in tunnel46_rcv(). Current code can generate an ICMPv6 error message with an IPv4 packet embedded in it. Fixes: 73d605d1 ("[IPSEC]: changing API of xfrm6_tunnel_register") Signed-off-by:
Michal Kubecek <mkubecek@suse.cz> Signed-off-by:
-
Arnd Bergmann authored
commit 777d738a upstream. create_request_message() computes the maximum length of a message, but uses the wrong type for the time stamp: sizeof(struct timespec) may be 8 or 16 depending on the architecture, while sizeof(struct ceph_timespec) is always 8, and that is what gets put into the message. Found while auditing the uses of timespec for y2038 problems. Fixes: b8e69066 ("ceph: include time stamp in every MDS request") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Yan, Zheng <zyan@redhat.com> Signed-off-by:
-
Chuck Lever authored
commit 7b3d770c upstream. ib_req_notify_cq(IB_CQ_REPORT_MISSED_EVENTS) returns a positive value if WCs were added to a CQ after the last completion upcall but before the CQ has been re-armed. Commit 7f23f6f6 ("xprtrmda: Reduce lock contention in completion handlers") assumed that when ib_req_notify_cq() returned a positive RC, the CQ had also been successfully re-armed, making it safe to return control to the provider without losing any completion signals. That is an invalid assumption. Change both completion handlers to continue polling while ib_req_notify_cq() returns a positive value. Fixes: 7f23f6f6 ("xprtrmda: Reduce lock contention in ...") Signed-off-by:
Chuck Lever <chuck.lever@oracle.com> Reviewed-by:
Sagi Grimberg <sagig@mellanox.com> Reviewed-by:
Devesh Sharma <devesh.sharma@avagotech.com> Tested-By:
Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by:
-
Florian Westphal authored
commit dbc3617f upstream. nfnetlink_bind request_module()s all the time as nfnetlink_get_subsys() shifts the argument by 8 to obtain the subsys id. So using type instead of type << 8 always returns NULL. Fixes: 03292745 ("netlink: add nlk->netlink_bind hook for module auto-loading") Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Masahiro Yamada authored
commit 3f5ceec9 upstream. fdt_translate_address() returns OF_BAD_ADDR on error. It is defined as a u64 value, so the variable "addr" should be defined as u64 as well. Fixes: fb11ffe7 ("of/fdt: add FDT serial scanning for earlycon") Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Tony Lindgren authored
commit 75c08f17 upstream. Commit 68bab866 ("mfd: twl6040: Optional clk32k clock handling") added clock handling for the 32k clock from palmas-clk. However, that patch did not consider a typical situation where twl6040 is built-in, and palmas-clk is a loadable module like we have in omap2plus_defconfig. If palmas-clk is not loaded before twl6040 probes, we will get a "clk32k is not handled" warning during booting. This means that any drivers relying on this clock will mysteriously fail, including omap5-uevm WLAN and audio. Note that for WLAN, we probably should also eventually get the clk32kgaudio for MMC3 directly as that's shared between audio and WLAN SDIO at least for omap5-uevm. It seems the WLAN chip cannot get it as otherwise MMC3 won't get properly probed. Fixes: 68bab866 ("mfd: twl6040: Optional clk32k clock handling") Signed-off-by:
Tony Lindgren <tony@atomide.com> Reviewed-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
-
Ralf Baechle authored
commit f25319d2 upstream. Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Fixes: f24219b4 (cherry picked from commit f0a232cde7be18a207fd057dd79bbac8a0a45dec) Signed-off-by:
-
Linus Walleij authored
commit 7bdccef3 upstream. A static code checker found a memory leak in the Versatile ICST code. Fix it. Fixes: a183da63 "clk: versatile: respect parent rate in ICST clock" Reported-by:
Stephen Boyd <sboyd@codeaurora.org> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Yuchung Cheng authored
commit 9e45a3e3 upstream. Currently ca_seq_rtt_us does not use Kern's check. Fix that by checking if any packet acked is a retransmit, for both RTT used for RTT estimation and congestion control. Fixes: 5b08e47c ("tcp: prefer packet timing to TS-ECR for RTT") Signed-off-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Takashi Sakamoto authored
commit fef586d5 upstream. In former commit, metering is supported for BeBoB based models customized by M-Audio. The data in transaction is aligned to big-endianness, while in the driver code u16 typed variable is assigned to the data. This causes sparse warnings. bebob_maudio.c:651:31: warning: cast to restricted __be16 bebob_maudio.c:651:31: warning: cast to restricted __be16 bebob_maudio.c:651:31: warning: cast to restricted __be16 bebob_maudio.c:651:31: warning: cast to restricted __be16 This commit fixes this bug by using __be16 variable for the data. Fixes: 3149ac48('ALSA: bebob: Add support for M-Audio special Firewire series') Signed-off-by:
Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by:
-
Takashi Sakamoto authored
commit 463543ac upstream. In former commit, snd_efw_command_get_phys_meters() was added to handle metering data. The given buffer is used to save transaction result and to convert between endianness. But this causes sparse warnings. fireworks_command.c:269:25: warning: incorrect type in argument 1 (different base types) fireworks_command.c:269:25: expected unsigned int [usertype] *p fireworks_command.c:269:25: got restricted __be32 [usertype] * This commit fixes this bug. Fixes: bde8a8f2('ALSA: fireworks: Add transaction and some commands') Signed-off-by:
-
Lukas Wunner authored
commit 3c67d839 upstream. In its original version, drm_framebuffer_init() returned a negative int if drm_mode_object_get() failed (f453ba04, "DRM: add mode setting support"). This was accidentally disabled by commit 4b096ac1 ("drm: revamp locking around fb creation/destruction"). Thus, drm_framebuffer_init() pretends success if drm_mode_object_get() failed. Reinstate the original behaviour. Also fix erroneous kernel-doc of drm_mode_object_get(). Fixes: 4b096ac1 ("drm: revamp locking around fb creation/ destruction") Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Lukas Wunner <lukas@wunner.de> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Takashi Sakamoto authored
commit df483388 upstream. When committed to upstream, these four modules had wrong entries for Makefile. This forces them to be loadable modules even if they're set as built-in. This commit fixes this bug. Fixes: b5b04336('ALSA: fireworks: Add skelton for Fireworks based devices') Fixes: fd6f4b0d('ALSA: bebob: Add skelton for BeBoB based devices') Fixes: 1a4e39c2('ALSA: oxfw: Move to its own directory') Fixes: 14ff6a09('ALSA: dice: Move file to its own directory') Signed-off-by:
-
Arnd Bergmann authored
commit 54c09889 upstream. The z2 machine calls pxa27x_set_pwrmode() in order to power off the machine, but this function gets discarded early at boot because it is marked __init, as pointed out by kbuild: WARNING: vmlinux.o(.text+0x145c4): Section mismatch in reference from the function z2_power_off() to the function .init.text:pxa27x_set_pwrmode() The function z2_power_off() references the function __init pxa27x_set_pwrmode(). This is often because z2_power_off lacks a __init annotation or the annotation of pxa27x_set_pwrmode is wrong. This removes the __init section modifier to fix rebooting and the build error. Signed-off-by:
Robert Jarzmik <robert.jarzmik@free.fr> [ luis: backported to 3.16: adjusted context ] Signed-off-by:
-
Roger Quadros authored
commit e74eba04 upstream. The error handling path is broken as cawake_gpio was defined as unsigned integer causing the following warnings on boards that don't use SSI port and so don't have cawake_gpio defined. e.g. beagleboard C4. [ 30.094635] WARNING: CPU: 0 PID: 322 at drivers/gpio/gpiolib.c:86 gpio_to_desc+0xa4/0xb8() [ 30.103363] invalid GPIO -2 [ 30.106292] Modules linked in: omap_ssi_port(+) cpufreq_dt cfbfillrect cfbimgblt leds_gpio cfbcopyarea thermal_sys led_class hwmon gpio_keys encoder_tfp410 connector_analog_tv connector_dvi omap_hdq snd phy_i [ 30.145477] CPU: 0 PID: 322 Comm: modprobe Not tainted 4.3.0-rc4-00030-gca978c0-dirty #335 [ 30.154174] Hardware name: Generic OMAP3-GP (Flattened Device Tree) [ 30.160827] [<c0016ef4>] (unwind_backtrace) from [<c00131f4>] (show_stack+0x10/0x14) [ 30.168975] [<c00131f4>] (show_stack) from [<c033cf08>] (dump_stack+0x80/0x9c) [ 30.176635] [<c033cf08>] (dump_stack) from [<c003e920>] (warn_slowpath_common+0x7c/0xb8) [ 30.185180] [<c003e920>] (warn_slowpath_common) from [<c003e9f0>] (warn_slowpath_fmt+0x30/0x40) [ 30.194366] [<c003e9f0>] (warn_slowpath_fmt) from [<c0376314>] (gpio_to_desc+0xa4/0xb8) [ 30.202819] [<c0376314>] (gpio_to_desc) from [<c0376ac8>] (gpio_request_one+0x14/0x11c) [ 30.211273] [<c0376ac8>] (gpio_request_one) from [<c037370c>] (devm_gpio_request_one+0x3c/0x78) [ 30.220458] [<c037370c>] (devm_gpio_request_one) from [<bf184210>] (ssi_port_probe+0x118/0x504 [omap_ssi_port]) [ 30.231170] [<bf184210>] (ssi_port_probe [omap_ssi_port]) from [<c03d4cfc>] (platform_drv_probe+0x48/0xa4) [ 30.241424] [<c03d4cfc>] (platform_drv_probe) from [<c03d3678>] (driver_probe_device+0x1dc/0x2a0) [ 30.250793] [<c03d3678>] (driver_probe_device) from [<c03d37d0>] (__driver_attach+0x94/0x98) [ 30.259643] [<c03d37d0>] (__driver_attach) from [<c03d1d60>] (bus_for_each_dev+0x54/0x88) [ 30.268249] [<c03d1d60>] (bus_for_each_dev) from [<c03d2d50>] (bus_add_driver+0xe8/0x1f8) [ 30.276916] [<c03d2d50>] (bus_add_driver) from [<c03d4118>] (driver_register+0x78/0xf4) [ 30.285369] [<c03d4118>] (driver_register) from [<c03d5380>] (__platform_driver_probe+0x34/0xd8) [ 30.294647] [<c03d5380>] (__platform_driver_probe) from [<c00097e4>] (do_one_initcall+0x80/0x1d8) [ 30.303985] [<c00097e4>] (do_one_initcall) from [<c011617c>] (do_init_module+0x5c/0x1cc) [ 30.312561] [<c011617c>] (do_init_module) from [<c00c7a68>] (load_module+0x18c8/0x1f0c) [ 30.320983] [<c00c7a68>] (load_module) from [<c00c8188>] (SyS_init_module+0xdc/0x150) [ 30.329223] [<c00c8188>] (SyS_init_module) from [<c000f7e0>] (ret_fast_syscall+0x0/0x1c) Fixes: b209e047 ("HSI: Introduce OMAP SSI driver") Signed-off-by:
Roger Quadros <rogerq@ti.com> Signed-off-by:
Sebastian Reichel <sre@kernel.org> Signed-off-by:
-
Geliang Tang authored
commit f098a045 upstream. When device_register() fails, kfree() is called in hsi_client_release(), hence there is no need to call kfree in err3 again. Fixes: a2aa2473 ("HSI: Add common DT binding for HSI client devices") Signed-off-by:
Geliang Tang <geliangtang@163.com> Signed-off-by:
-
Eric Dumazet authored
commit 161642e2 upstream. Recent TCP listener patches exposed a prior af_packet bug : match_fanout_group() blindly assumes it is always safe to cast sk to a packet socket to compare fanout with af_packet_priv But SYNACK packets can be sent while attached to request_sock, which are smaller than a "struct sock". We can read non existent memory and crash. Fixes: c0de08d0 ("af_packet: don't emit packet on orig fanout group") Fixes: ca6fb065 ("tcp: attach SYNACK messages to request sockets instead of listener") Signed-off-by:
-
Eric W. Biederman authored
commit 850dcc4d upstream. After a packet has been encapsulated by a tunnel we should use the tunnel sockets local multicast loopback flag to control if the encapsulated packet should be locally loopback back. Pass sk into ip_local_out_sk so that in the rare case we are dealing with a tunneled packet whose tunnel destination address is a multicast address the kernel properly decides to loopback this packet. In practice I don't think this matters as ip_queue_xmit is used by tcp, l2tp and sctp none of which I am aware of uses ip level multicasting as they are all point to point communications protocols. Let's fix this before someone uses ip_queue_xmit for a tunnel protocol that does use multicast. Fixes: aad88724 ("ipv4: add a sock pointer to dst->output() path.") Fixes: b0270e91 ("ipv4: add a sock pointer to ip_queue_xmit()") Signed-off-by:
"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Flavio Leitner authored
commit 0647e708 upstream. Remove __nf_conntrack_find() from headers. Fixes: dcd93ed4 ("netfilter: nf_conntrack: remove dead code") Signed-off-by:
Flavio Leitner <fbl@sysclose.org> Signed-off-by:
-
Dan Carpenter authored
commit 1f35d04a upstream. The iomap[] array has PCIM_IOMAP_MAX (6) elements and not DEVICE_COUNT_RESOURCE (16). This bug was found using a static checker. It may be that the "if (!(mask & (1 << i)))" check means we never actually go past the end of the array in real life. Fixes: ec04b075 ('iomap: implement pcim_iounmap_regions()') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Jonas Gorski authored
commit db1319e1 upstream. Commit d445913c ("usb: ehci-orion: add optional PHY support") added support for optional phys, but devm_phy_optional_get returns -ENOSYS if GENERIC_PHY is not enabled. This causes probe failures, even when there are no phys specified: [ 1.443365] orion-ehci f1058000.usb: init f1058000.usb fail, -38 [ 1.449403] orion-ehci: probe of f1058000.usb failed with error -38 Similar to dwc3, treat -ENOSYS as no phy. Fixes: d445913c ("usb: ehci-orion: add optional PHY support") Signed-off-by:
Jonas Gorski <jogo@openwrt.org> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Andy Shevchenko authored
commit 39416677 upstream. We replace __fls() by __ffs() since we have to find a *minimum* data width that satisfies both source and destination. While here, rename dwc_fast_fls() to dwc_fast_ffs() which it really is. Fixes: 4c2d56c5 (dw_dmac: introduce dwc_fast_fls()) Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
Vinod Koul <vinod.koul@intel.com> Signed-off-by:
-
Dan Carpenter authored
commit 1f9c6e1b upstream. There were several bugs here. 1) The done label was in the wrong place so we didn't copy any information out when there was no command given. 2) We were using PAGE_SIZE as the size of the buffer instead of "PAGE_SIZE - pos". 3) snprintf() returns the number of characters that would have been printed if there were enough space. If there was not enough space (and we had fixed the memory corruption bug #2) then it would result in an information leak when we do simple_read_from_buffer(). I've changed it to use scnprintf() instead. I also removed the initialization at the start of the function, because I thought it made the code a little more clear. Fixes: 5e6e3a92 ('wireless: mwifiex: initial commit for Marvell mwifiex driver') Signed-off-by:
Amitkumar Karwar <akarwar@marvell.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Valentin Rothberg authored
commit 90adf98d upstream. Since commit 1c6c6952 ("genirq: Reject bogus threaded irq requests") threaded IRQs without a primary handler need to be requested with IRQF_ONESHOT, otherwise the request will fail. scripts/coccinelle/misc/irqf_oneshot.cocci detected this issue. Fixes: b5874f33 ("wm831x_power: Use genirq") Signed-off-by:
Valentin Rothberg <valentinrothberg@gmail.com> Signed-off-by:
-
