- 04 May, 2016 26 commits
-
-
Catalin Marinas authored
commit fdc69e7d upstream. The set_pte_at() function must update the hardware PTE_RDONLY bit depending on the state of the PTE_WRITE and PTE_DIRTY bits of the given entry value. However, it currently only performs this for pte_valid() entries, ignoring PTE_PROT_NONE. The side-effect is that PROT_NONE mappings would not have the PTE_RDONLY bit set. Without CONFIG_ARM64_HW_AFDBM, this is not an issue since such PROT_NONE pages are not accessible anyway. With commit 2f4b829c ("arm64: Add support for hardware updates of the access and dirty pte bits"), the ptep_set_wrprotect() function was re-written to cope with automatic hardware updates of the dirty state. As an optimisation, only PTE_RDONLY is checked to assess the "dirty" status. Since set_pte_at() does not set this bit for PROT_NONE mappings, such pages may be considered "dirty" as a result of ptep_set_wrprotect(). This patch updates the pte_valid() check to pte_present() in set_pte_at(). It also adds PTE_PROT_NONE to the swap entry bits comment. Fixes: 2f4b829c ("arm64: Add support for hardware updates of the access and dirty pte bits") Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Reported-by:
Ganapatrao Kulkarni <gkulkarni@caviumnetworks.com> Tested-by:
Ganapatrao Kulkarni <gkulkarni@cavium.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Catalin Marinas authored
commit ac15bd63 upstream. Currently, set_pte_at() only checks the software PTE_WRITE bit for user mappings when it sets or clears the hardware PTE_RDONLY accordingly. The kernel ptes are written directly without any modification, relying solely on the protection bits in macros like PAGE_KERNEL. However, modifying kernel pte attributes via pte_wrprotect() would be ignored by set_pte_at(). Since pte_wrprotect() does not set PTE_RDONLY (it only clears PTE_WRITE), the new permission is not taken into account. This patch changes set_pte_at() to adjust the read-only permission for kernel ptes as well. As a side effect, existing PROT_* definitions used for kernel ioremap*() need to include PTE_DIRTY | PTE_WRITE. (additionally, white space fix for PTE_KERNEL_ROX) Acked-by:
Andrey Ryabinin <aryabinin@virtuozzo.com> Tested-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Peter Zijlstra authored
commit 2f5177f0 upstream. The CPU controller hasn't kept up with the various changes in the whole cgroup initialization / destruction sequence, and commit: 2e91fa7f ("cgroup: keep zombies associated with their original cgroups") caused it to explode. The reason for this is that zombies do not inhibit css_offline() from being called, but do stall css_released(). Now we tear down the cfs_rq structures on css_offline() but zombies can run after that, leading to use-after-free issues. The solution is to move the tear-down to css_released(), which guarantees nobody (including no zombies) is still using our cgroup. Furthermore, a few simple cleanups are possible too. There doesn't appear to be any point to us using css_online() (anymore?) so fold that in css_alloc(). And since cgroup code guarantees an RCU grace period between css_released() and css_free() we can forgo using call_rcu() and free the stuff immediately. Suggested-by:
Tejun Heo <tj@kernel.org> Reported-by:
Kazuki Yamaguchi <k@rhe.jp> Reported-by:
Niklas Cassel <niklas.cassel@axis.com> Tested-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Robert Jarzmik authored
commit 6bab1c6a upstream. The current number of requestor lines is limited to 31. This was an error of a previous commit, as this number is platform dependent, and is actually : - for pxa25x: 40 requestor lines - for pxa27x: 75 requestor lines - for pxa3xx: 100 requestor lines The previous testing did not reveal the faulty constant as on pxa[23]xx platforms, only camera, MSL and USB are above requestor 32, and in these only the camera has a driver using dma. Fixes: e87ffbdf ("dmaengine: pxa_dma: fix the no-requestor case") Signed-off-by:
Robert Jarzmik <robert.jarzmik@free.fr> Acked-by:
Vinod Koul <vinod.koul@intel.com> Signed-off-by:
-
Andy Shevchenko authored
commit 4f4bc0ab upstream. There is a typo in documentation regarding to descriptor empty bit (DESCE) which is set to 1 when descriptor is empty. Thus, status register at the end of a transfer usually returns all DESCE bits set and thus it will never be zero. Moreover, there are 2 bits (CDESC) that encode current descriptor, on which interrupt has been asserted. In case when we have few descriptors programmed we might have non-zero value. Remove DESCE and CDESC bits from DMA channel status register (HSU_CH_SR) when reading it. Fixes: 2b49e0c5 ("dmaengine: append hsu DMA driver") Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Andy Shevchenko authored
commit 3fe6409c upstream. The commit 89500520 ("dmaengine: dw: apply both HS interfaces and remove slave_id usage") cleaned up the code to avoid usage of depricated slave_id member of generic slave configuration. Meanwhile it broke the master selection by removing important call to dwc_set_masters() in ->device_alloc_chan_resources() which copied masters from custom slave configuration to the internal channel structure. Everything works until now since there is no customized connection of DesignWare DMA IP to the bus, i.e. one bus and one or more masters are in use. The configurations where 2 masters are connected to the different masters are not working anymore. We are expecting one user of such configuration and need to select masters properly. Besides that it is obviously a performance regression since only one master is in use in multi-master configuration. Select masters in accordance with what user asked for. Keep this patch in a form more suitable for back porting. We are safe to take necessary data in ->device_alloc_chan_resources() because we don't support generic slave configuration embedded into custom one, and thus the only way to provide such is to use the parameter to a filter function which is called exactly before channel resource allocation. While here, replase BUG_ON to less noisy dev_warn() and prevent channel allocation in case of error. Fixes: 89500520 ("dmaengine: dw: apply both HS interfaces and remove slave_id usage") Signed-off-by:
-
Seth Forshee authored
commit 87243deb upstream. Starting with 4.1 the tracing subsystem has its own filesystem which is automounted in the tracing subdirectory of debugfs. Prior to this debugfs could be bind mounted in a cloned mount namespace, but if tracefs has been mounted under debugfs this now fails because there is a locked child mount. This creates a regression for container software which bind mounts debugfs to satisfy the assumption of some userspace software. In other pseudo filesystems such as proc and sysfs we're already creating mountpoints like this in such a way that no dirents can be created in the directories, allowing them to be exceptions to some MNT_LOCKED tests. In fact we're already do this for the tracefs mountpoint in sysfs. Do the same in debugfs_create_automount(), since the intention here is clearly to create a mountpoint. This fixes the regression, as locked child mounts on permanently empty directories do not cause a bind mount to fail. Signed-off-by:
Seth Forshee <seth.forshee@canonical.com> Acked-by:
Serge Hallyn <serge.hallyn@canonical.com> Signed-off-by:
-
Rui Salvaterra authored
commit 3e26a691 upstream. Based on Sergey's test patch [1], this fixes zram with lz4 compression on big endian cpus. Note that the 64-bit preprocessor test is not a cleanup, it's part of the fix, since those identifiers are bogus (for example, __ppc64__ isn't defined anywhere else in the kernel, which means we'd fall into the 32-bit definitions on ppc64). Tested on ppc64 with no regression on x86_64. [1] http://marc.info/?l=linux-kernel&m=145994470805853&w=4Suggested-by:
Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by:
Rui Salvaterra <rsalvaterra@gmail.com> Reviewed-by:
-
Ahmed Samy authored
commit 6545b60b upstream. Commit 9567366f ("dm cache metadata: fix READ_LOCK macros and cleanup WRITE_LOCK macros") uses down_write() instead of down_read() in cmd_read_lock(), yet up_read() is used to release the lock in READ_UNLOCK(). Fix it. Fixes: 9567366f ("dm cache metadata: fix READ_LOCK macros and cleanup WRITE_LOCK macros") Signed-off-by:
Ahmed Samy <f.fallen45@gmail.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Mike Snitzer authored
commit 9567366f upstream. The READ_LOCK macro was incorrectly returning -EINVAL if dm_bm_is_read_only() was true -- it will always be true once the cache metadata transitions to read-only by dm_cache_metadata_set_read_only(). Wrap READ_LOCK and WRITE_LOCK multi-statement macros in do {} while(0). Also, all accesses of the 'cmd' argument passed to these related macros are now encapsulated in parenthesis. A follow-up patch can be developed to eliminate the use of macros in favor of pure C code. Avoiding that now given that this needs to apply to stable@. Reported-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
-
Lars-Peter Clausen authored
commit 38740a5b upstream. When using asynchronous read or write operations on the USB endpoints the issuer of the IO request is notified by calling the ki_complete() callback of the submitted kiocb when the URB has been completed. Calling this ki_complete() callback will free kiocb. Make sure that the structure is no longer accessed beyond that point, otherwise undefined behaviour might occur. Fixes: 2e4c7553 ("usb: gadget: f_fs: add aio support") Signed-off-by:
Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Robert Dobrowolski authored
commit e86103a7 upstream. On BXT platform Host Controller and Device Controller figure as same PCI device but with different device function. HCD should not pass data to Device Controller but only to Host Controllers. Checking if companion device is Host Controller, otherwise skip. Signed-off-by:
Robert Dobrowolski <robert.dobrowolski@linux.intel.com> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Mathias Nyman authored
commit 98d74f9c upstream. PCI hotpluggable xhci controllers such as some Alpine Ridge solutions will remove the xhci controller from the PCI bus when the last USB device is disconnected. Add a flag to indicate that the host is being removed to avoid queueing configure_endpoint commands for the dropped endpoints. For PCI hotplugged controllers this will prevent 5 second command timeouts For static xhci controllers the configure_endpoint command is not needed in the removal case as everything will be returned, freed, and the controller is reset. For now the flag is only set for PCI connected host controllers. Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
-
Lu Baolu authored
commit 71504062 upstream. This patch fixes some wild pointers produced by xhci_mem_cleanup. These wild pointers will cause system crash if xhci_mem_cleanup() is called twice. Reported-and-tested-by:
Pengcheng Li <lpc.li@hisilicon.com> Signed-off-by:
Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by:
-
Mathias Nyman authored
commit 671ffdff upstream. Give USB3 devices a better chance to enumerate at USB 3 speeds if they are connected to a suspended host. Solves an issue with NEC uPD720200 host hanging when partially enumerating a USB3 device as USB2 after host controller runtime resume. Tested-by:
Mike Murdoch <main.haarp@gmail.com> Signed-off-by:
-
Rafal Redzimski authored
commit 0d46faca upstream. Broxton B0 also requires XHCI_PME_STUCK_QUIRK. Adding PCI device ID for Broxton B and adding to quirk. Signed-off-by:
Rafal Redzimski <rafal.f.redzimski@intel.com> Signed-off-by:
-
Jerome Marchand authored
commit 8d4a2ec1 upstream. Changes since V1: fixed the description and added KASan warning. In assoc_array_insert_into_terminal_node(), we call the compare_object() method on all non-empty slots, even when they're not leaves, passing a pointer to an unexpected structure to compare_object(). Currently it causes an out-of-bound read access in keyring_compare_object detected by KASan (see below). The issue is easily reproduced with keyutils testsuite. Only call compare_object() when the slot is a leave. KASan warning: ================================================================== BUG: KASAN: slab-out-of-bounds in keyring_compare_object+0x213/0x240 at addr ffff880060a6f838 Read of size 8 by task keyctl/1655 ============================================================================= BUG kmalloc-192 (Not tainted): kasan: bad access detected ----------------------------------------------------------------------------- Disabling lock debugging due to kernel taint INFO: Allocated in assoc_array_insert+0xfd0/0x3a60 age=69 cpu=1 pid=1647 ___slab_alloc+0x563/0x5c0 __slab_alloc+0x51/0x90 kmem_cache_alloc_trace+0x263/0x300 assoc_array_insert+0xfd0/0x3a60 __key_link_begin+0xfc/0x270 key_create_or_update+0x459/0xaf0 SyS_add_key+0x1ba/0x350 entry_SYSCALL_64_fastpath+0x12/0x76 INFO: Slab 0xffffea0001829b80 objects=16 used=8 fp=0xffff880060a6f550 flags=0x3fff8000004080 INFO: Object 0xffff880060a6f740 @offset=5952 fp=0xffff880060a6e5d1 Bytes b4 ffff880060a6f730: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ Object ffff880060a6f740: d1 e5 a6 60 00 88 ff ff 0e 00 00 00 00 00 00 00 ...`............ Object ffff880060a6f750: 02 cf 8e 60 00 88 ff ff 02 c0 8e 60 00 88 ff ff ...`.......`.... Object ffff880060a6f760: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ Object ffff880060a6f770: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ Object ffff880060a6f780: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ Object ffff880060a6f790: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ Object ffff880060a6f7a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ Object ffff880060a6f7b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ Object ffff880060a6f7c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ Object ffff880060a6f7d0: 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ Object ffff880060a6f7e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ Object ffff880060a6f7f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ CPU: 0 PID: 1655 Comm: keyctl Tainted: G B 4.5.0-rc4-kasan+ #291 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 0000000000000000 000000001b2800b4 ffff880060a179e0 ffffffff81b60491 ffff88006c802900 ffff880060a6f740 ffff880060a17a10 ffffffff815e2969 ffff88006c802900 ffffea0001829b80 ffff880060a6f740 ffff880060a6e650 Call Trace: [<ffffffff81b60491>] dump_stack+0x85/0xc4 [<ffffffff815e2969>] print_trailer+0xf9/0x150 [<ffffffff815e9454>] object_err+0x34/0x40 [<ffffffff815ebe50>] kasan_report_error+0x230/0x550 [<ffffffff819949be>] ? keyring_get_key_chunk+0x13e/0x210 [<ffffffff815ec62d>] __asan_report_load_n_noabort+0x5d/0x70 [<ffffffff81994cc3>] ? keyring_compare_object+0x213/0x240 [<ffffffff81994cc3>] keyring_compare_object+0x213/0x240 [<ffffffff81bc238c>] assoc_array_insert+0x86c/0x3a60 [<ffffffff81bc1b20>] ? assoc_array_cancel_edit+0x70/0x70 [<ffffffff8199797d>] ? __key_link_begin+0x20d/0x270 [<ffffffff8199786c>] __key_link_begin+0xfc/0x270 [<ffffffff81993389>] key_create_or_update+0x459/0xaf0 [<ffffffff8128ce0d>] ? trace_hardirqs_on+0xd/0x10 [<ffffffff81992f30>] ? key_type_lookup+0xc0/0xc0 [<ffffffff8199e19d>] ? lookup_user_key+0x13d/0xcd0 [<ffffffff81534763>] ? memdup_user+0x53/0x80 [<ffffffff819983ea>] SyS_add_key+0x1ba/0x350 [<ffffffff81998230>] ? key_get_type_from_user.constprop.6+0xa0/0xa0 [<ffffffff828bcf4e>] ? retint_user+0x18/0x23 [<ffffffff8128cc7e>] ? trace_hardirqs_on_caller+0x3fe/0x580 [<ffffffff81004017>] ? trace_hardirqs_on_thunk+0x17/0x19 [<ffffffff828bc432>] entry_SYSCALL_64_fastpath+0x12/0x76 Memory state around the buggy address: ffff880060a6f700: fc fc fc fc fc fc fc fc 00 00 00 00 00 00 00 00 ffff880060a6f780: 00 00 00 00 00 00 00 00 00 00 00 fc fc fc fc fc >ffff880060a6f800: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ^ ffff880060a6f880: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff880060a6f900: fc fc fc fc fc fc 00 00 00 00 00 00 00 00 00 00 ================================================================== Signed-off-by:
Jerome Marchand <jmarchan@redhat.com> Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
Lokesh Vutla authored
commit 3ca4a238 upstream. Commit 127500cc ("ARM: OMAP2+: Only write the sysconfig on idle when necessary") talks about verification of sysconfig cache value before updating it, only during idle path. But the patch is adding the verification in the enable path. So, adding the check in a proper place as per the commit description. Not keeping this check during enable path as there is a chance of losing context and it is safe to do on idle as the context of the register will never be lost while the device is active. Signed-off-by:
Lokesh Vutla <lokeshvutla@ti.com> Acked-by:
Tero Kristo <t-kristo@ti.com> Cc: Jon Hunter <jonathanh@nvidia.com> Fixes: commit 127500cc "ARM: OMAP2+: Only write the sysconfig on idle when necessary" [paul@pwsan.com: appears to have been caused by my own mismerge of the originally posted patch] Signed-off-by:
Paul Walmsley <paul@pwsan.com> Signed-off-by:
-
Nishanth Menon authored
commit 456e8d53 upstream. The following commits: commit 3fa60975 ("ARM: omap2: restore OMAP4 barrier behaviour") commit f746929f ("Revert "ARM: OMAP4: remove dead kconfig option OMAP4_ERRATA_I688"") and commit ea827ad5 ("ARM: DRA7: Provide proper IO map table") came in around the same time, unfortunately this seem to have missed initializing the barrier for DRA7 platforms - omap5_map_io was reused for dra7 till it was split out by the last patch. barrier_init needs to be hence carried forward as it is valid for DRA7 family of processors as they are for OMAP5. Fixes: ea827ad5 ("ARM: DRA7: Provide proper IO map table") Reported-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reported-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
Nishanth Menon <nm@ti.com> Reviewed-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Patrick Uiterwijk authored
commit 199831c7 upstream. The USB2 port for Armada 38x is defined to be at 58000, not at 50000. Fixes: 2d0a7add ("ARM: Kirkwood: Add support for many Synology NAS devices") Signed-off-by:
Patrick Uiterwijk <patrick@puiterwijk.org> Acked-by:
Imre Kaloz <kaloz@openwrt.org> Signed-off-by:
Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by:
-
Lokesh Vutla authored
commit cfe1580a upstream. commit 55ee7017 ("arm: omap2: board-generic: use omap4_local_timer_init for AM437x") makes synctimer32k as the clocksource on AM43xx. By default the synctimer32k is clocked by 32K RTC OSC on AM43xx. But this 32K RTC OSC is not available on epos boards which makes it fail to boot. Synctimer32k can also be clocked by a peripheral PLL, so making this as clock parent for synctimer3k on epos boards. Fixes: 55ee7017 ("arm: omap2: board-generic: use omap4_local_timer_init for AM437x") Reported-by:
-
Marc Zyngier authored
commit 1c5631c7 upstream. On a host that runs NTP, corrections can have a direct impact on the background timer that we program on the behalf of a vcpu. In particular, NTP performing a forward correction will result in a timer expiring sooner than expected from a guest point of view. Not a big deal, we kick the vcpu anyway. But on wake-up, the vcpu thread is going to perform a check to find out whether or not it should block. And at that point, the timer check is going to say "timer has not expired yet, go back to sleep". This results in the timer event being lost forever. There are multiple ways to handle this. One would be record that the timer has expired and let kvm_cpu_has_pending_timer return true in that case, but that would be fairly invasive. Another is to check for the "short sleep" condition in the hrtimer callback, and restart the timer for the remaining time when the condition is detected. This patch implements the latter, with a bit of refactoring in order to avoid too much code duplication. Reported-by:
Alexander Graf <agraf@suse.de> Reviewed-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
-
David Matlack authored
commit fc5b7f3b upstream. An interrupt handler that uses the fpu can kill a KVM VM, if it runs under the following conditions: - the guest's xcr0 register is loaded on the cpu - the guest's fpu context is not loaded - the host is using eagerfpu Note that the guest's xcr0 register and fpu context are not loaded as part of the atomic world switch into "guest mode". They are loaded by KVM while the cpu is still in "host mode". Usage of the fpu in interrupt context is gated by irq_fpu_usable(). The interrupt handler will look something like this: if (irq_fpu_usable()) { kernel_fpu_begin(); [... code that uses the fpu ...] kernel_fpu_end(); } As long as the guest's fpu is not loaded and the host is using eager fpu, irq_fpu_usable() returns true (interrupted_kernel_fpu_idle() returns true). The interrupt handler proceeds to use the fpu with the guest's xcr0 live. kernel_fpu_begin() saves the current fpu context. If this uses XSAVE[OPT], it may leave the xsave area in an undesirable state. According to the SDM, during XSAVE bit i of XSTATE_BV is not modified if bit i is 0 in xcr0. So it's possible that XSTATE_BV[i] == 1 and xcr0[i] == 0 following an XSAVE. kernel_fpu_end() restores the fpu context. Now if any bit i in XSTATE_BV == 1 while xcr0[i] == 0, XRSTOR generates a #GP. The fault is trapped and SIGSEGV is delivered to the current process. Only pre-4.2 kernels appear to be vulnerable to this sequence of events. Commit 653f52c3 ("kvm,x86: load guest FPU context more eagerly") from 4.2 forces the guest's fpu to always be loaded on eagerfpu hosts. This patch fixes the bug by keeping the host's xcr0 loaded outside of the interrupts-disabled region where KVM switches into guest mode. Suggested-by:
Andy Lutomirski <luto@amacapital.net> Signed-off-by:
David Matlack <dmatlack@google.com> [Move load after goto cancel_injection. - Paolo] Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Tony Luck authored
commit a3125494 upstream. When we loop over all queued machine check error records to pass them to the registered notifiers we use llist_for_each_entry(). But the loop calls gen_pool_free() for the entry in the body of the loop - and then the iterator looks at node->next after the free. Use llist_for_each_entry_safe() instead. Signed-off-by:
Tony Luck <tony.luck@intel.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Cc: Gong Chen <gong.chen@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/0205920@agluck-desk.sc.intel.com Link: http://lkml.kernel.org/r/1459929916-12852-4-git-send-email-bp@alien8.deSigned-off-by:
-
Ming Lei authored
commit a7297a6a upstream. Starting from commit e36f6204(block: split bios to max possible length), block core starts to split bio in the middle of bvec. Unfortunately loop dio/aio doesn't consider this situation, and always treat 'iter.iov_offset' as zero. Then filesystem corruption is observed. This patch figures out the offset of the base bvevc via 'bio->bi_iter.bi_bvec_done' and fixes the issue by passing the offset to iov iterator. Fixes: e36f6204 (block: split bios to max possible length) Cc: Keith Busch <keith.busch@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Ming Lei <ming.lei@canonical.com> Signed-off-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
-
Ming Lei authored
commit b30a337c upstream. The initialization of partition's percpu_ref should have been done before sending out KOBJ_ADD uevent, which may cause userspace to read partition table. So the uninitialized percpu_ref may be accessed in data path. This patch fixes this issue reported by Naveen. Reported-by:
Naveen Kaje <nkaje@codeaurora.org> Tested-by:
-
- 20 Apr, 2016 14 commits
-
-
Greg Kroah-Hartman authored
-
Greg Kroah-Hartman authored
commit e5bdfd50 upstream. This reverts commit d8f00cd6. Tony writes: This upstream commit is causing an oops: d8f00cd6 ("usb: hub: do not clear BOS field during reset device") This patch has already been included in several -stable kernels. Here are the affected kernels: 4.5.0-rc4 (current git) 4.4.2 4.3.6 (currently in review) 4.1.18 3.18.27 3.14.61 How to reproduce the problem: Boot kernel with slub debugging enabled (otherwise memory corruption will cause random oopses later instead of immediately) Plug in USB 3.0 disk to xhci USB 3.0 port dd if=/dev/sdc of=/dev/null bs=65536 (where /dev/sdc is the USB 3.0 disk) Unplug USB cable while dd is still going Oops is immediate: Reported-by:
Tony Battersby <tonyb@cybernetics.com> Cc: Du, Changbin <changbin.du@intel.com> Cc: Roger Quadros <rogerq@ti.com> Signed-off-by:
-
Vladis Dronov authored
commit fa52bd50 upstream. The usbvision driver crashes when a specially crafted usb device with invalid number of interfaces or endpoints is detected. This fix adds checks that the device has proper configuration expected by the driver. Reported-by:
Ralf Spenneberg <ralf@spenneberg.net> Signed-off-by:
Vladis Dronov <vdronov@redhat.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by:
-
Liviu Dudau authored
commit 70bc916b upstream. ion_buffer_create() will allocate a buffer and then create a DMA mapping for it, but it forgot to set the length of the page entries. Signed-off-by:
Liviu Dudau <Liviu.Dudau@arm.com> Signed-off-by:
Jon Medhurst <tixy@linaro.org> Acked-by:
Laura Abbott <labbott@redhat.com> Cc: Shawn Guo <shawnguo@kernel.org> Signed-off-by:
-
Bjorn Helgaas authored
commit 6c777e87 upstream. 991de2e5 ("PCI, x86: Implement pcibios_alloc_irq() and pcibios_free_irq()") appeared in v4.3 and helps support IOAPIC hotplug. Олег reported that the Elcus-1553 TA1-PCI driver worked in v4.2 but not v4.3 and bisected it to 991de2e5. Sunjin reported that the RocketRAID 272x driver worked in v4.2 but not v4.3. In both cases booting with "pci=routirq" is a workaround. I think the problem is that after 991de2e5, we no longer call pcibios_enable_irq() for upstream bridges. Prior to 991de2e5, when a driver called pci_enable_device(), we recursively called pcibios_enable_irq() for upstream bridges via pci_enable_bridge(). After 991de2e5, we call pcibios_enable_irq() from pci_device_probe() instead of the pci_enable_device() path, which does *not* call pcibios_enable_irq() for upstream bridges. Revert 991de2e5 to fix these driver regressions. Link: https://bugzilla.kernel.org/show_bug.cgi?id=111211 Fixes: 991de2e5 ("PCI, x86: Implement pcibios_alloc_irq() and pcibios_free_irq()") Reported-and-tested-by:
Олег Мороз <oleg.moroz@mcc.vniiem.ru> Reported-by:
Sunjin Yang <fan4326@gmail.com> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Acked-by:
Rafael J. Wysocki <rafael@kernel.org> CC: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by:
-
Bjorn Helgaas authored
commit 67b4eab9 upstream. Revert 811a4e6f ("PCI: Add helpers to manage pci_dev->irq and pci_dev->irq_managed"). This is part of reverting 991de2e5 ("PCI, x86: Implement pcibios_alloc_irq() and pcibios_free_irq()") to fix regressions it introduced. Link: https://bugzilla.kernel.org/show_bug.cgi?id=111211 Fixes: 991de2e5 ("PCI, x86: Implement pcibios_alloc_irq() and pcibios_free_irq()") Signed-off-by:
-
Bjorn Helgaas authored
commit fe25d078 upstream. Revert 8affb487 ("x86/PCI: Don't alloc pcibios-irq when MSI is enabled"). This is part of reverting 991de2e5 ("PCI, x86: Implement pcibios_alloc_irq() and pcibios_free_irq()") to fix regressions it introduced. Link: https://bugzilla.kernel.org/show_bug.cgi?id=111211 Fixes: 991de2e5 ("PCI, x86: Implement pcibios_alloc_irq() and pcibios_free_irq()") Signed-off-by:
-
Alan Stern authored
commit 972e6a99 upstream. The usbhid driver has inconsistently duplicated code in its post-reset, resume, and reset-resume pathways. reset-resume doesn't check HID_STARTED before trying to restart the I/O queues. resume fails to clear the HID_SUSPENDED flag if HID_STARTED isn't set. resume calls usbhid_restart_queues() with usbhid->lock held and the others call it without holding the lock. The first item in particular causes a problem following a reset-resume if the driver hasn't started up its I/O. URB submission fails because usbhid->urbin is NULL, and this triggers an unending reset-retry loop. This patch fixes the problem by creating a new subroutine, hid_restart_io(), to carry out all the common activities. It also adds some checks that were missing in the original code: After a reset, there's no need to clear any halted endpoints. After a resume, if a reset is pending there's no need to restart any I/O until the reset is finished. After a resume, if the interrupt-IN endpoint is halted there's no need to submit the input URB until the halt has been cleared. Signed-off-by:
Daniel Fraga <fragabr@gmail.com> Tested-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Benjamin Tissoires authored
commit 580549ef upstream. Looks like recent changes in the Wacom driver made the Bamboo ONE crashes. The tablet behaves as if it was a regular Bamboo device with pen, touch and pad, but there is no physical pad connected to it. The weird part is that the pad is still sending events and given that there is no input node connected to it, we get anull pointer exception. Link: https://bugzilla.redhat.com/show_bug.cgi?id=1317116Signed-off-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by:
Ping Cheng <pingc@wacom.com> Signed-off-by:
-
Kailang Yang authored
commit adcdd0d5 upstream. This is Dell usb dock audio workaround. It was fixed the master volume keep lower. [Some background: the patch essentially skips the controls of a couple of FU volumes. Although the firmware exposes the dB and the value information via the usb descriptor, changing the values (we set the min volume as default) screws up the device. Although this has been fixed in the newer firmware, the devices are shipped with the old firmware, thus we need the workaround in the driver side. -- tiwai] Signed-off-by:
Kailang Yang <kailang@realtek.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Dennis Kadioglu authored
commit b4203ff5 upstream. Plantronics BT300 does not support reading the sample rate which leads to many lines of "cannot get freq at ep 0x1". This patch adds the USB ID of the BT300 to quirks.c and avoids those error messages. Signed-off-by:
Dennis Kadioglu <denk@post.com> Signed-off-by:
-
Takashi Iwai authored
commit f03b24a8 upstream. Phoenix Audio TMX320 gives the similar error when the sample rate is asked: usb 2-1.3: 2:1: cannot get freq at ep 0x85 usb 2-1.3: 1:1: cannot get freq at ep 0x2 .... Add the corresponding USB-device ID (1de7:0014) to snd_usb_get_sample_rate_quirk() list. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=110221Signed-off-by:
-
Sven Eckelmann authored
commit c636b95e upstream. The Lenovo Thinkpad T460s requires the alc_fixup_tpt440_dock as well in order to get working sound output on the docking stations headphone jack. Patch tested on a Thinkpad T460s (20F9CT01WW) using a ThinkPad Ultradock on kernel 4.4.6. Signed-off-by:
Sven Eckelmann <sven@narfation.org> Tested-by:
Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by:
-
Hui Wang authored
commit e549d190 upstream. The front mic jack (pink color) can't detect any plug or unplug. After applying this fix, both detecting function and recording function work well. BugLink: https://bugs.launchpad.net/bugs/1564712Signed-off-by:
Hui Wang <hui.wang@canonical.com> Signed-off-by:
-
