- 14 Mar, 2019 40 commits
-
-
Shawn Lin authored
BugLink: https://bugs.launchpad.net/bugs/1818797 commit 984ec63c upstream. >From the function name of get_valid_checkpoint, it seems to return the valid cp or NULL for caller to check. If no valid one is found, f2fs_fill_super will print the err log. But if get_valid_checkpoint get one valid(the return value indicate that it's valid, however actually it is invalid after sanity checking), then print another similar err log. That seems strange. Let's keep sanity checking inside the procedure of geting valid cp. Another improvement we gained from this move is that even the large volume is supported, we check the cp in advanced to skip the following procedure if failing the sanity checking. Signed-off-by:
Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by:
Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by:
Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Juerg Haefliger <juergh@canonical.com> Signed-off-by:
Khalid Elmously <khalid.elmously@canonical.com>
-
Jaegeuk Kim authored
BugLink: https://bugs.launchpad.net/bugs/1818797 commit a5131193 upstream. There was a subtle bug on nat cache management which incurs wrong nid allocation or wrong block addresses when try_to_free_nats is triggered heavily. This patch enlarges the previous coverage of nat_tree_lock to avoid data race. Signed-off-by:
-
Chao Yu authored
BugLink: https://bugs.launchpad.net/bugs/1818797 commit b7973f23 upstream. In recover_data, value of argument 'type' will be CURSEG_WARM_NODE all the time, remove it for cleanup. Signed-off-by:
Chao Yu <chao2.yu@samsung.com> Signed-off-by:
-
Oliver Hartkopp authored
BugLink: https://bugs.launchpad.net/bugs/1818797 commit 0aaa8137 upstream. Muyu Yu provided a POC where user root with CAP_NET_ADMIN can create a CAN frame modification rule that makes the data length code a higher value than the available CAN frame data size. In combination with a configured checksum calculation where the result is stored relatively to the end of the data (e.g. cgw_csum_xor_rel) the tail of the skb (e.g. frag_list pointer in skb_shared_info) can be rewritten which finally can cause a system crash. Michael Kubecek suggested to drop frames that have a DLC exceeding the available space after the modification process and provided a patch that can handle CAN FD frames too. Within this patch we also limit the length for the checksum calculations to the maximum of Classic CAN data length (8). CAN frames that are dropped by these additional checks are counted with the CGW_DELETED counter which indicates misconfigurations in can-gw rules. This fixes CVE-2019-3701. Reported-by:
Muyu Yu <ieatmuttonchuan@gmail.com> Reported-by:
Marcus Meissner <meissner@suse.de> Suggested-by:
Michal Kubecek <mkubecek@suse.cz> Tested-by:
Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Dmitry Safonov authored
BugLink: https://bugs.launchpad.net/bugs/1818797 commit 231f8fd0 upstream. ldsem_down_read() will sleep if there is pending writer in the queue. If the writer times out, readers in the queue should be woken up, otherwise they may miss a chance to acquire the semaphore until the last active reader will do ldsem_up_read(). There was a couple of reports where there was one active reader and other readers soft locked up: Showing all locks held in the system: 2 locks held by khungtaskd/17: #0: (rcu_read_lock){......}, at: watchdog+0x124/0x6d1 #1: (tasklist_lock){.+.+..}, at: debug_show_all_locks+0x72/0x2d3 2 locks held by askfirst/123: #0: (&tty->ldisc_sem){.+.+.+}, at: ldsem_down_read+0x46/0x58 #1: (&ldata->atomic_read_lock){+.+...}, at: n_tty_read+0x115/0xbe4 Prevent readers wait for active readers to release ldisc semaphore. Link: lkml.kernel.org/r/20171121132855.ajdv4k6swzhvktl6@wfg-t540p.sh.intel.com Link: lkml.kernel.org/r/20180907045041.GF1110@shao2-debian Cc: Jiri Slaby <jslaby@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: stable@vger.kernel.org Reported-by:
kernel test robot <rong.a.chen@intel.com> Signed-off-by:
Dmitry Safonov <dima@arista.com> Signed-off-by:
-
Greg Kroah-Hartman authored
BugLink: https://bugs.launchpad.net/bugs/1818237Signed-off-by:
-
Vasily Averin authored
BugLink: https://bugs.launchpad.net/bugs/1818237 commit d4b09acf upstream. if node have NFSv41+ mounts inside several net namespaces it can lead to use-after-free in svc_process_common() svc_process_common() /* Setup reply header */ rqstp->rq_xprt->xpt_ops->xpo_prep_reply_hdr(rqstp); <<< HERE svc_process_common() can use incorrect rqstp->rq_xprt, its caller function bc_svc_process() takes it from serv->sv_bc_xprt. The problem is that serv is global structure but sv_bc_xprt is assigned per-netnamespace. According to Trond, the whole "let's set up rqstp->rq_xprt for the back channel" is nothing but a giant hack in order to work around the fact that svc_process_common() uses it to find the xpt_ops, and perform a couple of (meaningless for the back channel) tests of xpt_flags. All we really need in svc_process_common() is to be able to run rqstp->rq_xprt->xpt_ops->xpo_prep_reply_hdr() Bruce J Fields points that this xpo_prep_reply_hdr() call is an awfully roundabout way just to do "svc_putnl(resv, 0);" in the tcp case. This patch does not initialiuze rqstp->rq_xprt in bc_svc_process(), now it calls svc_process_common() with rqstp->rq_xprt = NULL. To adjust reply header svc_process_common() just check rqstp->rq_prot and calls svc_tcp_prep_reply_hdr() for tcp case. To handle rqstp->rq_xprt = NULL case in functions called from svc_process_common() patch intruduces net namespace pointer svc_rqst->rq_bc_net and adjust SVC_NET() definition. Some other function was also adopted to properly handle described case. Signed-off-by:
Vasily Averin <vvs@virtuozzo.com> Cc: stable@vger.kernel.org Fixes: 23c20ecd ("NFS: callback up - users counting cleanup") Signed-off-by:
J. Bruce Fields <bfields@redhat.com> v2: - added lost extern svc_tcp_prep_reply_hdr() - dropped trace_svc_process() changes - context fixes in svc_process_common() Signed-off-by:
-
Theodore Ts'o authored
BugLink: https://bugs.launchpad.net/bugs/1818237 commit 2b08b1f1 upstream. The ext4_inline_data_fiemap() function calls fiemap_fill_next_extent() while still holding the xattr semaphore. This is not necessary and it triggers a circular lockdep warning. This is because fiemap_fill_next_extent() could trigger a page fault when it writes into page which triggers a page fault. If that page is mmaped from the inline file in question, this could very well result in a deadlock. This problem can be reproduced using generic/519 with a file system configuration which has the inline_data feature enabled. Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by:
-
Eric Biggers authored
BugLink: https://bugs.launchpad.net/bugs/1818237 [It's a minimal fix for a bug that was fixed incidentally by a large refactoring in v4.8.] In the CTS template, when the input length is <= one block cipher block (e.g. <= 16 bytes for AES) pass the correct length to the underlying CBC transform rather than one block. This matches the upstream behavior and makes the encryption/decryption operation correctly return -EINVAL when 1 <= nbytes < bsize or succeed when nbytes == 0, rather than crashing. This was fixed upstream incidentally by a large refactoring, commit 0605c41c ("crypto: cts - Convert to skcipher"). But syzkaller easily trips over this when running on older kernels, as it's easily reachable via AF_ALG. Therefore, this patch makes the minimal fix for older kernels. Cc: linux-crypto@vger.kernel.org Fixes: 76cb9521 ("[CRYPTO] cts: Add CTS mode required for Kerberos AES support") Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
-
Yi Zeng authored
BugLink: https://bugs.launchpad.net/bugs/1818237 commit 6ebec961 upstream. If adapter->retries is set to a minus value from user space via ioctl, it will make __i2c_transfer and __i2c_smbus_xfer skip the calling to adapter->algo->master_xfer and adapter->algo->smbus_xfer that is registered by the underlying bus drivers, and return value 0 to all the callers. The bus driver will never be accessed anymore by all users, besides, the users may still get successful return value without any error or information log print out. If adapter->timeout is set to minus value from user space via ioctl, it will make the retrying loop in __i2c_transfer and __i2c_smbus_xfer always break after the the first try, due to the time_after always returns true. Signed-off-by:
Yi Zeng <yizeng@asrmicro.com> [wsa: minor grammar updates to commit message] Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org Signed-off-by:
-
Hans de Goede authored
BugLink: https://bugs.launchpad.net/bugs/1818237 commit 7d7b467c upstream. Some ACPI tables contain duplicate power resource references like this: Name (_PR0, Package (0x04) // _PR0: Power Resources for D0 { P28P, P18P, P18P, CLK4 }) This causes a WARN_ON in sysfs_add_link_to_group() because we end up adding a link to the same acpi_device twice: sysfs: cannot create duplicate filename '/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/808622C1:00/OVTI2680:00/power_resources_D0/LNXPOWER:0a' CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.19.12-301.fc29.x86_64 #1 Hardware name: Insyde CherryTrail/Type2 - Board Product Name, BIOS jumperx.T87.KFBNEEA02 04/13/2016 Call Trace: dump_stack+0x5c/0x80 sysfs_warn_dup.cold.3+0x17/0x2a sysfs_do_create_link_sd.isra.2+0xa9/0xb0 sysfs_add_link_to_group+0x30/0x50 acpi_power_expose_list+0x74/0xa0 acpi_power_add_remove_device+0x50/0xa0 acpi_add_single_object+0x26b/0x5f0 acpi_bus_check_add+0xc4/0x250 ... To address this issue, make acpi_extract_power_resources() check for duplicates and simply skip them when found. Cc: All applicable <stable@vger.kernel.org> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> [ rjw: Subject & changelog, comments ] Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Ley Foon Tan authored
BugLink: https://bugs.launchpad.net/bugs/1818237 commit ce4f1c7a upstream. Previously we used a PCI early fixup to initiate a link retrain on Altera devices. But Altera PCIe IP can be configured as either a Root Port or an Endpoint, and they might have same vendor ID, so the fixup would be run for both. We only want to initiate a link retrain for Altera Root Port devices, not for Endpoints, so move the link retrain functionality from the fixup to altera_pcie_host_init(). [bhelgaas: changelog] Signed-off-by:
Ley Foon Tan <lftan@altera.com> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Cc: Claudius Heine <claudius.heine.ext@siemens.com> Signed-off-by:
-
Ley Foon Tan authored
BugLink: https://bugs.launchpad.net/bugs/1818237 commit 31fc0ad4 upstream. Rework configs accessors so a future patch can use them in _probe() with struct altera_pcie instead of struct pci_bus. Signed-off-by:
-
Ley Foon Tan authored
BugLink: https://bugs.launchpad.net/bugs/1818237 commit 411dc32d upstream. Poll for link training status is cleared before poll for link up status. This can help to get the reliable link up status, especially when PCIe is in Gen 3 speed. Signed-off-by:
-
Ley Foon Tan authored
BugLink: https://bugs.launchpad.net/bugs/1818237 commit 3a928e98 upstream. Some PCIe devices take a long time to reach link up state after retrain. Poll for link up status after retraining the link. This is to make sure the link is up before we access configuration space. [bhelgaas: changelog] Signed-off-by:
-
Ley Foon Tan authored
BugLink: https://bugs.launchpad.net/bugs/1818237 commit c622032e upstream. Check the link status before retraining. If the link is not up, don't bother trying to retrain it. [bhelgaas: split code move to separate patch, changelog] Signed-off-by:
-
Bjorn Helgaas authored
BugLink: https://bugs.launchpad.net/bugs/1818237 commit f8be11ae upstream. Move cra_writel(), cra_readl(), and altera_pcie_link_is_up() so a future patch can use them in altera_pcie_retrain(). No functional change intended. Signed-off-by:
-
Ley Foon Tan authored
BugLink: https://bugs.launchpad.net/bugs/1818237 commit eff31f40 upstream. Originally altera_pcie_link_is_up() decided the link was up if any of the low four bits of the LTSSM register were set. But the link is only up if the LTSSM state is L0, so check for that exact value. [bhelgaas: changelog] Signed-off-by:
-
Christoph Lameter authored
BugLink: https://bugs.launchpad.net/bugs/1818237 commit 09c2e76e upstream. Callers of __alloc_alien() check for NULL. We must do the same check in __alloc_alien_cache to avoid NULL pointer dereferences on allocation failures. Link: http://lkml.kernel.org/r/010001680f42f192-82b4e12e-1565-4ee0-ae1f-1e98974906aa-000000@email.amazonses.com Fixes: 49dfc304 ("slab: use the lock on alien_cache, instead of the lock on array_cache") Fixes: c8522a3a ("Slab: introduce alloc_alien") Signed-off-by:
Christoph Lameter <cl@linux.com> Reported-by: syzbot+d6ed4ec679652b4fd4e4@syzkaller.appspotmail.com Reviewed-by:
Andrew Morton <akpm@linux-foundation.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Jack Stocker authored
BugLink: https://bugs.launchpad.net/bugs/1818237 commit 3483254b upstream. To match the Corsair Strafe RGB, the Corsair K70 RGB also requires USB_QUIRK_DELAY_CTRL_MSG to completely resolve boot connection issues discussed here: https://github.com/ckb-next/ckb-next/issues/42. Otherwise roughly 1 in 10 boots the keyboard will fail to be detected. Patch that applied delay control quirk for Corsair Strafe RGB: cb88a058 ("usb: quirks: add control message delay for 1b1c:1b20") Previous K70 RGB patch to add delay-init quirk: 7a1646d9 ("Add delay-init quirk for Corsair K70 RGB keyboards") Signed-off-by:
Jack Stocker <jackstocker.93@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Icenowy Zheng authored
BugLink: https://bugs.launchpad.net/bugs/1818237 commit 0a99cc4b upstream. The SMI SM3350 USB-UFS bridge controller cannot handle long sense request correctly and will make the chip refuse to do read/write when requested long sense. Add a bad sense quirk for it. Signed-off-by:
Icenowy Zheng <icenowy@aosc.io> Cc: stable <stable@vger.kernel.org> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Icenowy Zheng authored
BugLink: https://bugs.launchpad.net/bugs/1818237 commit c5603d2f upstream. Currently the code will set US_FL_SANE_SENSE flag unconditionally if device claims SPC3+, however we should allow US_FL_BAD_SENSE flag to prevent this behavior, because SMI SM3350 UFS-USB bridge controller, which claims SPC4, will show strange behavior with 96-byte sense (put the chip into a wrong state that cannot read/write anything). Check the presence of US_FL_BAD_SENSE when assuming US_FL_SANE_SENSE on SPC4+ devices. Signed-off-by:
-
Daniele Palmas authored
BugLink: https://bugs.launchpad.net/bugs/1818237 commit 34aabf91 upstream. Telit 3G Intel based modems require zero packet to be sent if out data size is equal to the endpoint max packet size. Signed-off-by:
Daniele Palmas <dnlplm@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Ross Lagerwall authored
BugLink: https://bugs.launchpad.net/bugs/1818237 commit b9a74cde upstream. If maxBuf is small but non-zero, it could result in a zero sized lock element array which we would then try and access OOB. Signed-off-by:
Ross Lagerwall <ross.lagerwall@citrix.com> Signed-off-by:
Steve French <stfrench@microsoft.com> CC: Stable <stable@vger.kernel.org> Signed-off-by:
-
Pavel Shilovsky authored
BugLink: https://bugs.launchpad.net/bugs/1818237 commit ee13919c upstream. Currently we hide EINTR code returned from sock_sendmsg() and return 0 instead. This makes a caller think that we successfully completed the network operation which is not true. Fix this by properly returning EINTR to callers. Cc: <stable@vger.kernel.org> Signed-off-by:
Pavel Shilovsky <pshilov@microsoft.com> Reviewed-by:
Jeff Layton <jlayton@kernel.org> Signed-off-by:
-
Shaokun Zhang authored
BugLink: https://bugs.launchpad.net/bugs/1818237 commit 761333f2 upstream. block_group_err shows the group system as a decimal value with a '0x' prefix, which is somewhat misleading. Fix it to print hexadecimal, as was intended. Fixes: fce466ea ("btrfs: tree-checker: Verify block_group_item") Reviewed-by:
Nikolay Borisov <nborisov@suse.com> Reviewed-by:
Qu Wenruo <wqu@suse.com> Signed-off-by:
Shaokun Zhang <zhangshaokun@hisilicon.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Qu Wenruo authored
BugLink: https://bugs.launchpad.net/bugs/1818237 commit f556faa4 upstream. Although we have tree level check at tree read runtime, it's completely based on its parent level. We still need to do accurate level check to avoid invalid tree blocks sneak into kernel space. The check itself is simple, for leaf its level should always be 0. For nodes its level should be in range [1, BTRFS_MAX_LEVEL - 1]. Signed-off-by:
Su Yue <suy.fnst@cn.fujitsu.com> Reviewed-by:
-
Qu Wenruo authored
BugLink: https://bugs.launchpad.net/bugs/1818237 commit 7ef49515 upstream. If a crafted image has missing block group items, it could cause unexpected behavior and breaks the assumption of 1:1 chunk<->block group mapping. Although we have the block group -> chunk mapping check, we still need chunk -> block group mapping check. This patch will do extra check to ensure each chunk has its corresponding block group. Link: https://bugzilla.kernel.org/show_bug.cgi?id=199847Reported-by:
Xu Wen <wen.xu@gatech.edu> Signed-off-by:
Gu Jinxiang <gujx@cn.fujitsu.com> Reviewed-by:
-
Qu Wenruo authored
BugLink: https://bugs.launchpad.net/bugs/1818237 commit 514c7dca upstream. A crafted btrfs image with incorrect chunk<->block group mapping will trigger a lot of unexpected things as the mapping is essential. Although the problem can be caught by block group item checker added in "btrfs: tree-checker: Verify block_group_item", it's still not sufficient. A sufficiently valid block group item can pass the check added by the mentioned patch but could fail to match the existing chunk. This patch will add extra block group -> chunk mapping check, to ensure we have a completely matching (start, len, flags) chunk for each block group at mount time. Here we reuse the original helper find_first_block_group(), which is already doing the basic bg -> chunk checks, adding further checks of the start/len and type flags. Link: https://bugzilla.kernel.org/show_bug.cgi?id=199837Reported-by:
-
Gu Jinxiang authored
BugLink: https://bugs.launchpad.net/bugs/1818237 commit 315409b0 upstream. Reported in https://bugzilla.kernel.org/show_bug.cgi?id=199839, with an image that has an invalid chunk type but does not return an error. Add chunk type check in btrfs_check_chunk_valid, to detect the wrong type combinations. Link: https://bugzilla.kernel.org/show_bug.cgi?id=199839Reported-by:
-
Qu Wenruo authored
BugLink: https://bugs.launchpad.net/bugs/1818237 commit ba480dd4 upstream. A crafted image has empty root tree block, which will later cause NULL pointer dereference. The following trees should never be empty: 1) Tree root Must contain at least root items for extent tree, device tree and fs tree 2) Chunk tree Or we can't even bootstrap as it contains the mapping. 3) Fs tree At least inode item for top level inode (.). 4) Device tree Dev extents for chunks 5) Extent tree Must have corresponding extent for each chunk. If any of them is empty, we are sure the fs is corrupted and no need to mount it. Link: https://bugzilla.kernel.org/show_bug.cgi?id=199847Reported-by:
-
Qu Wenruo authored
BugLink: https://bugs.launchpad.net/bugs/1818237 commit fce466ea upstream. A crafted image with invalid block group items could make free space cache code to cause panic. We could detect such invalid block group item by checking: 1) Item size Known fixed value. 2) Block group size (key.offset) We have an upper limit on block group item (10G) 3) Chunk objectid Known fixed value. 4) Type Only 4 valid type values, DATA, METADATA, SYSTEM and DATA|METADATA. No more than 1 bit set for profile type. 5) Used space No more than the block group size. This should allow btrfs to detect and refuse to mount the crafted image. Link: https://bugzilla.kernel.org/show_bug.cgi?id=199849Reported-by:
-
David Sterba authored
BugLink: https://bugs.launchpad.net/bugs/1818237 commit e2683fc9 upstream. I've noticed that the updated item checker stack consumption increased dramatically in 542f5385e20cf97447 ("btrfs: tree-checker: Add checker for dir item") tree-checker.c:check_leaf +552 (176 -> 728) The array is 255 bytes long, dynamic allocation would slow down the sanity checks so it's more reasonable to keep it on-stack. Moving the variable to the scope of use reduces the stack usage again tree-checker.c:check_leaf -264 (728 -> 464) Reviewed-by:
Josef Bacik <jbacik@fb.com> Reviewed-by:
-
Arnd Bergmann authored
BugLink: https://bugs.launchpad.net/bugs/1818237 commit 7cfad652 upstream. The return value of sizeof() is of type size_t, so we must print it using the %z format modifier rather than %l to avoid this warning on some architectures: fs/btrfs/tree-checker.c: In function 'check_dir_item': fs/btrfs/tree-checker.c:273:50: error: format '%lu' expects argument of type 'long unsigned int', but argument 5 has type 'u32' {aka 'unsigned int'} [-Werror=format=] Fixes: 005887f2e3e0 ("btrfs: tree-checker: Add checker for dir item") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
-
Qu Wenruo authored
BugLink: https://bugs.launchpad.net/bugs/1818237 commit ad7b0368 upstream. Add checker for dir item, for key types DIR_ITEM, DIR_INDEX and XATTR_ITEM. This checker does comprehensive checks for: 1) dir_item header and its data size Against item boundary and maximum name/xattr length. This part is mostly the same as old verify_dir_item(). 2) dir_type Against maximum file types, and against key type. Since XATTR key should only have FT_XATTR dir item, and normal dir item type should not have XATTR key. The check between key->type and dir_type is newly introduced by this patch. 3) name hash For XATTR and DIR_ITEM key, key->offset is name hash (crc32c). Check the hash of the name against the key to ensure it's correct. The name hash check is only found in btrfs-progs before this patch. Signed-off-by:
-
Qu Wenruo authored
BugLink: https://bugs.launchpad.net/bugs/1818237 commit 69fc6cbb upstream. [BUG] If we run btrfs with CONFIG_BTRFS_FS_RUN_SANITY_TESTS=y, it will instantly cause kernel panic like: ------ ... assertion failed: 0, file: fs/btrfs/disk-io.c, line: 3853 ... Call Trace: btrfs_mark_buffer_dirty+0x187/0x1f0 [btrfs] setup_items_for_insert+0x385/0x650 [btrfs] __btrfs_drop_extents+0x129a/0x1870 [btrfs] ... ----- [Cause] Btrfs will call btrfs_check_leaf() in btrfs_mark_buffer_dirty() to check if the leaf is valid with CONFIG_BTRFS_FS_RUN_SANITY_TESTS=y. However quite some btrfs_mark_buffer_dirty() callers(*) don't really initialize its item data but only initialize its item pointers, leaving item data uninitialized. This makes tree-checker catch uninitialized data as error, causing such panic. *: These callers include but not limited to setup_items_for_insert() btrfs_split_item() btrfs_expand_item() [Fix] Add a new parameter @check_item_data to btrfs_check_leaf(). With @check_item_data set to false, item data check will be skipped and fallback to old btrfs_check_leaf() behavior. So we can still get early warning if we screw up item pointers, and avoid false panic. Cc: Filipe Manana <fdmanana@gmail.com> Reported-by:
Lakshmipathi.G <lakshmipathi.g@gmail.com> Signed-off-by:
Liu Bo <bo.li.liu@oracle.com> Reviewed-by:
-
Qu Wenruo authored
BugLink: https://bugs.launchpad.net/bugs/1818237 commit bba4f298 upstream. Use inline function to replace macro since we don't need stringification. (Macro still exists until all callers get updated) And add more info about the error, and replace EIO with EUCLEAN. For nr_items error, report if it's too large or too small, and output the valid value range. For node block pointer, added a new alignment checker. For key order, also output the next key to make the problem more obvious. Signed-off-by:
Qu Wenruo <quwenruo.btrfs@gmx.com> [ wording adjustments, unindented long strings ] Signed-off-by:
-
Qu Wenruo authored
BugLink: https://bugs.launchpad.net/bugs/1818237 commit 557ea5dd upstream. It's no doubt the comprehensive tree block checker will become larger, so moving them into their own files is quite reasonable. Signed-off-by:
-
Qu Wenruo authored
BugLink: https://bugs.launchpad.net/bugs/1818237 commit 4b865cab upstream. EXTENT_CSUM checker is a relatively easy one, only needs to check: 1) Objectid Fixed to BTRFS_EXTENT_CSUM_OBJECTID 2) Key offset alignment Must be aligned to sectorsize 3) Item size alignedment Must be aligned to csum size Signed-off-by:
-
Qu Wenruo authored
BugLink: https://bugs.launchpad.net/bugs/1818237 commit 40c3c409 upstream. Add extra checks for item with EXTENT_DATA type. This checks the following thing: 0) Key offset All key offsets must be aligned to sectorsize. Inline extent must have 0 for key offset. 1) Item size Uncompressed inline file extent size must match item size. (Compressed inline file extent has no information about its on-disk size.) Regular/preallocated file extent size must be a fixed value. 2) Every member of regular file extent item Including alignment for bytenr and offset, possible value for compression/encryption/type. 3) Type/compression/encode must be one of the valid values. This should be the most comprehensive and strict check in the context of btrfs_item for EXTENT_DATA. Signed-off-by:
-
