- 24 Apr, 2020 40 commits
-
-
Michael Ellerman authored
commit c7def7fb upstream. In restore_tm_sigcontexts() we take the trap value directly from the user sigcontext with no checking: err |= __get_user(regs->trap, &sc->gp_regs[PT_TRAP]); This means we can be in the kernel with an arbitrary regs->trap value. Although that's not immediately problematic, there is a risk we could trigger one of the uses of CHECK_FULL_REGS(): #define CHECK_FULL_REGS(regs) BUG_ON(regs->trap & 1) It can also cause us to unnecessarily save non-volatile GPRs again in save_nvgprs(), which shouldn't be problematic but is still wrong. It's also possible it could trick the syscall restart machinery, which relies on regs->trap not being == 0xc00 (see 9a81c16b ("powerpc: fix double syscall restarts")), though I haven't been able to make that happen. Finally it doesn't match the behaviour of the non-TM case, in restore_sigcontext() which zeroes regs->trap. So change restore_tm_sigcontexts() to zero regs->trap. This was discovered while testing Nick's upcoming rewrite of the syscall entry path. In that series the call to save_nvgprs() prior to signal handling (do_notify_resume()) is removed, which leaves the low-bit of regs->trap uncleared which can then trigger the FULL_REGS() WARNs in setup_tm_sigcontexts(). Fixes: 2b0a576d ("powerpc: Add new transactional memory state to the signal context") Cc: stable@vger.kernel.org # v3.9+ Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200401023836.3286664-1-mpe@ellerman.id.auSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Kai-Heng Feng authored
commit 8305f72f upstream. During system resume from suspend, this can be observed on ASM1062 PMP controller: ata10.01: SATA link down (SStatus 0 SControl 330) ata10.02: hard resetting link ata10.02: SATA link down (SStatus 0 SControl 330) ata10.00: configured for UDMA/133 Kernel panic - not syncing: stack-protector: Kernel in: sata_pmp_eh_recover+0xa2b/0xa40 CPU: 2 PID: 230 Comm: scsi_eh_9 Tainted: P OE #49-Ubuntu Hardware name: System manufacturer System Product 1001 12/10/2017 Call Trace: dump_stack+0x63/0x8b panic+0xe4/0x244 ? sata_pmp_eh_recover+0xa2b/0xa40 __stack_chk_fail+0x19/0x20 sata_pmp_eh_recover+0xa2b/0xa40 ? ahci_do_softreset+0x260/0x260 [libahci] ? ahci_do_hardreset+0x140/0x140 [libahci] ? ata_phys_link_offline+0x60/0x60 ? ahci_stop_engine+0xc0/0xc0 [libahci] sata_pmp_error_handler+0x22/0x30 ahci_error_handler+0x45/0x80 [libahci] ata_scsi_port_error_handler+0x29b/0x770 ? ata_scsi_cmd_error_handler+0x101/0x140 ata_scsi_error+0x95/0xd0 ? scsi_try_target_reset+0x90/0x90 scsi_error_handler+0xd0/0x5b0 kthread+0x121/0x140 ? scsi_eh_get_sense+0x200/0x200 ? kthread_create_worker_on_cpu+0x70/0x70 ret_from_fork+0x22/0x40 Kernel Offset: 0xcc00000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) Since sata_pmp_eh_recover_pmp() doens't set rc when ATA_DFLAG_DETACH is set, sata_pmp_eh_recover() continues to run. During retry it triggers the stack protector. Set correct rc in sata_pmp_eh_recover_pmp() to let sata_pmp_eh_recover() jump to pmp_fail directly. BugLink: https://bugs.launchpad.net/bugs/1821434 Cc: stable@vger.kernel.org Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Simon Gander authored
commit 25efb2ff upstream. When removing files containing extended attributes, the hfsplus driver may remove the wrong entries from the attributes b-tree, causing major filesystem damage and in some cases even kernel crashes. To remove a file, all its extended attributes have to be removed as well. The driver does this by looking up all keys in the attributes b-tree with the cnid of the file. Each of these entries then gets deleted using the key used for searching, which doesn't contain the attribute's name when it should. Since the key doesn't contain the name, the deletion routine will not find the correct entry and instead remove the one in front of it. If parent nodes have to be modified, these become corrupt as well. This causes invalid links and unsorted entries that not even macOS's fsck_hfs is able to fix. To fix this, modify the search key before an entry is deleted from the attributes b-tree by copying the found entry's key into the search key, therefore ensuring that the correct entry gets removed from the tree. Signed-off-by:
Simon Gander <simon@tuxera.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Reviewed-by:
Anton Altaparmakov <anton@tuxera.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200327155541.1521-1-simon@tuxera.comSigned-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Oliver O'Halloran authored
commit d0a72efa upstream. The cpufreq driver has a use-after-free that we can hit if: a) There's an OCC message pending when the notifier is registered, and b) The cpufreq driver fails to register with the core. When a) occurs the notifier schedules a workqueue item to handle the message. The backing work_struct is located on chips[].throttle and when b) happens we clean up by freeing the array. Once we get to the (now free) queued item and the kernel crashes. Fixes: c5e29ea7 ("cpufreq: powernv: Fix bugs in powernv_cpufreq_{init/exit}") Cc: stable@vger.kernel.org # v4.6+ Signed-off-by:
Oliver O'Halloran <oohall@gmail.com> Reviewed-by:
Gautham R. Shenoy <ego@linux.vnet.ibm.com> Signed-off-by:
-
Eric Biggers authored
commit d7d27cfc upstream. Patch series "module autoloading fixes and cleanups", v5. This series fixes a bug where request_module() was reporting success to kernel code when module autoloading had been completely disabled via 'echo > /proc/sys/kernel/modprobe'. It also addresses the issues raised on the original thread (https://lkml.kernel.org/lkml/20200310223731.126894-1-ebiggers@kernel.org/T/#u) bydocumenting the modprobe sysctl, adding a self-test for the empty path case, and downgrading a user-reachable WARN_ONCE(). This patch (of 4): It's long been possible to disable kernel module autoloading completely (while still allowing manual module insertion) by setting /proc/sys/kernel/modprobe to the empty string. This can be preferable to setting it to a nonexistent file since it avoids the overhead of an attempted execve(), avoids potential deadlocks, and avoids the call to security_kernel_module_request() and thus on SELinux-based systems eliminates the need to write SELinux rules to dontaudit module_request. However, when module autoloading is disabled in this way, request_module() returns 0. This is broken because callers expect 0 to mean that the module was successfully loaded. Apparently this was never noticed because this method of disabling module autoloading isn't used much, and also most callers don't use the return value of request_module() since it's always necessary to check whether the module registered its functionality or not anyway. But improperly returning 0 can indeed confuse a few callers, for example get_fs_type() in fs/filesystems.c where it causes a WARNING to be hit: if (!fs && (request_module("fs-%.*s", len, name) == 0)) { fs = __get_fs_type(name, len); WARN_ONCE(!fs, "request_module fs-%.*s succeeded, but still no fs?\n", len, name); } This is easily reproduced with: echo > /proc/sys/kernel/modprobe mount -t NONEXISTENT none / It causes: request_module fs-NONEXISTENT succeeded, but still no fs? WARNING: CPU: 1 PID: 1106 at fs/filesystems.c:275 get_fs_type+0xd6/0xf0 [...] This should actually use pr_warn_once() rather than WARN_ONCE(), since it's also user-reachable if userspace immediately unloads the module. Regardless, request_module() should correctly return an error when it fails. So let's make it return -ENOENT, which matches the error when the modprobe binary doesn't exist. I've also sent patches to document and test this case. Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
Kees Cook <keescook@chromium.org> Reviewed-by:
Jessica Yu <jeyu@kernel.org> Acked-by:
Luis Chamberlain <mcgrof@kernel.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jeff Vander Stoep <jeffv@google.com> Cc: Ben Hutchings <benh@debian.org> Cc: Josh Triplett <josh@joshtriplett.org> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200310223731.126894-1-ebiggers@kernel.org Link: http://lkml.kernel.org/r/20200312202552.241885-1-ebiggers@kernel.orgSigned-off-by:
-
Hans de Goede authored
commit ebc68ced upstream. The Acer Aspire 5738z has a button to disable (and re-enable) the touchpad next to the touchpad. When this button is pressed a LED underneath indicates that the touchpad is disabled (and an event is send to userspace and GNOME shows its touchpad enabled / disable OSD thingie). So far so good, but after re-enabling the touchpad it no longer works. The laptop does not have an external ps2 port, so mux mode is not needed and disabling mux mode fixes the touchpad no longer working after toggling it off and back on again, so lets add this laptop model to the nomux list. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20200331123947.318908-1-hdegoede@redhat.com Cc: stable@vger.kernel.org Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Michael Mueller authored
commit 6c7c851f upstream. Show the full diag statistic table and not just parts of it. The issue surfaced in a KVM guest with a number of vcpus defined smaller than NR_DIAG_STAT. Fixes: 1ec2772e ("s390/diag: add a statistic for diagnose calls") Cc: stable@vger.kernel.org Signed-off-by:
Michael Mueller <mimu@linux.ibm.com> Reviewed-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
Vasily Gorbik <gor@linux.ibm.com> Signed-off-by:
-
Changwei Ge authored
commit 783fda85 upstream. Linux fallocate(2) with FALLOC_FL_PUNCH_HOLE mode set, its offset can exceed the inode size. Ocfs2 now doesn't allow that offset beyond inode size. This restriction is not necessary and violates fallocate(2) semantics. If fallocate(2) offset is beyond inode size, just return success and do nothing further. Otherwise, ocfs2 will crash the kernel. kernel BUG at fs/ocfs2//alloc.c:7264! ocfs2_truncate_inline+0x20f/0x360 [ocfs2] ocfs2_remove_inode_range+0x23c/0xcb0 [ocfs2] __ocfs2_change_file_space+0x4a5/0x650 [ocfs2] ocfs2_fallocate+0x83/0xa0 [ocfs2] vfs_fallocate+0x148/0x230 SyS_fallocate+0x48/0x80 do_syscall_64+0x79/0x170 Signed-off-by:
Changwei Ge <chge@linux.alibaba.com> Signed-off-by:
Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200407082754.17565-1-chge@linux.alibaba.comSigned-off-by:
-
Qian Cai authored
commit 28936b62 upstream. inode->i_blocks could be accessed concurrently as noticed by KCSAN, BUG: KCSAN: data-race in ext4_do_update_inode [ext4] / inode_add_bytes write to 0xffff9a00d4b982d0 of 8 bytes by task 22100 on cpu 118: inode_add_bytes+0x65/0xf0 __inode_add_bytes at fs/stat.c:689 (inlined by) inode_add_bytes at fs/stat.c:702 ext4_mb_new_blocks+0x418/0xca0 [ext4] ext4_ext_map_blocks+0x1a6b/0x27b0 [ext4] ext4_map_blocks+0x1a9/0x950 [ext4] _ext4_get_block+0xfc/0x270 [ext4] ext4_get_block_unwritten+0x33/0x50 [ext4] __block_write_begin_int+0x22e/0xae0 __block_write_begin+0x39/0x50 ext4_write_begin+0x388/0xb50 [ext4] ext4_da_write_begin+0x35f/0x8f0 [ext4] generic_perform_write+0x15d/0x290 ext4_buffered_write_iter+0x11f/0x210 [ext4] ext4_file_write_iter+0xce/0x9e0 [ext4] new_sync_write+0x29c/0x3b0 __vfs_write+0x92/0xa0 vfs_write+0x103/0x260 ksys_write+0x9d/0x130 __x64_sys_write+0x4c/0x60 do_syscall_64+0x91/0xb05 entry_SYSCALL_64_after_hwframe+0x49/0xbe read to 0xffff9a00d4b982d0 of 8 bytes by task 8 on cpu 65: ext4_do_update_inode+0x4a0/0xf60 [ext4] ext4_inode_blocks_set at fs/ext4/inode.c:4815 ext4_mark_iloc_dirty+0xaf/0x160 [ext4] ext4_mark_inode_dirty+0x129/0x3e0 [ext4] ext4_convert_unwritten_extents+0x253/0x2d0 [ext4] ext4_convert_unwritten_io_end_vec+0xc5/0x150 [ext4] ext4_end_io_rsv_work+0x22c/0x350 [ext4] process_one_work+0x54f/0xb90 worker_thread+0x80/0x5f0 kthread+0x1cd/0x1f0 ret_from_fork+0x27/0x50 4 locks held by kworker/u256:0/8: #0: ffff9a025abc4328 ((wq_completion)ext4-rsv-conversion){+.+.}, at: process_one_work+0x443/0xb90 #1: ffffab5a862dbe20 ((work_completion)(&ei->i_rsv_conversion_work)){+.+.}, at: process_one_work+0x443/0xb90 #2: ffff9a025a9d0f58 (jbd2_handle){++++}, at: start_this_handle+0x1c1/0x9d0 [jbd2] #3: ffff9a00d4b985d8 (&(&ei->i_raw_lock)->rlock){+.+.}, at: ext4_do_update_inode+0xaa/0xf60 [ext4] irq event stamp: 3009267 hardirqs last enabled at (3009267): [<ffffffff980da9b7>] __find_get_block+0x107/0x790 hardirqs last disabled at (3009266): [<ffffffff980da8f9>] __find_get_block+0x49/0x790 softirqs last enabled at (3009230): [<ffffffff98a0034c>] __do_softirq+0x34c/0x57c softirqs last disabled at (3009223): [<ffffffff97cc67a2>] irq_exit+0xa2/0xc0 Reported by Kernel Concurrency Sanitizer on: CPU: 65 PID: 8 Comm: kworker/u256:0 Tainted: G L 5.6.0-rc2-next-20200221+ #7 Hardware name: HPE ProLiant DL385 Gen10/ProLiant DL385 Gen10, BIOS A40 07/10/2019 Workqueue: ext4-rsv-conversion ext4_end_io_rsv_work [ext4] The plain read is outside of inode->i_lock critical section which results in a data race. Fix it by adding READ_ONCE() there. Link: https://lore.kernel.org/r/20200222043258.2279-1-cai@lca.pwSigned-off-by:
Qian Cai <cai@lca.pw> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by:
-
Nathan Chancellor authored
commit c5015652 upstream. Clang warns when one enumerated type is implicitly converted to another: drivers/rtc/rtc-omap.c:574:21: warning: implicit conversion from enumeration type 'enum rtc_pin_config_param' to different enumeration type 'enum pin_config_param' [-Wenum-conversion] {"ti,active-high", PIN_CONFIG_ACTIVE_HIGH, 0}, ~ ^~~~~~~~~~~~~~~~~~~~~~ drivers/rtc/rtc-omap.c:579:12: warning: implicit conversion from enumeration type 'enum rtc_pin_config_param' to different enumeration type 'enum pin_config_param' [-Wenum-conversion] PCONFDUMP(PIN_CONFIG_ACTIVE_HIGH, "input active high", NULL, false), ~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./include/linux/pinctrl/pinconf-generic.h:163:11: note: expanded from macro 'PCONFDUMP' .param = a, .display = b, .format = c, .has_arg = d \ ^ 2 warnings generated. It is expected that pinctrl drivers can extend pin_config_param because of the gap between PIN_CONFIG_END and PIN_CONFIG_MAX so this conversion isn't an issue. Most drivers that take advantage of this define the PIN_CONFIG variables as constants, rather than enumerated values. Do the same thing here so that Clang no longer warns. Link: https://github.com/ClangBuiltLinux/linux/issues/144Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by:
-
Fredrik Strupe authored
commit fc226601 upstream. For thumb instructions, call_undef_hook() in traps.c first reads a u16, and if the u16 indicates a T32 instruction (u16 >= 0xe800), a second u16 is read, which then makes up the the lower half-word of a T32 instruction. For T16 instructions, the second u16 is not read, which makes the resulting u32 opcode always have the upper half set to 0. However, having the upper half of instr_mask in the undef_hook set to 0 masks out the upper half of all thumb instructions - both T16 and T32. This results in trapped T32 instructions with the lower half-word equal to the T16 encoding of setend (b650) being matched, even though the upper half-word is not 0000 and thus indicates a T32 opcode. An example of such a T32 instruction is eaa0b650, which should raise a SIGILL since T32 instructions with an eaa prefix are unallocated as per Arm ARM, but instead works as a SETEND because the second half-word is set to b650. This patch fixes the issue by extending instr_mask to include the upper u32 half, which will still match T16 instructions where the upper half is 0, but not T32 instructions. Fixes: 2d888f48 ("arm64: Emulate SETEND for AArch32 tasks") Cc: <stable@vger.kernel.org> # 4.0.x- Reviewed-by:
Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by:
Fredrik Strupe <fredrik@strupe.net> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Steffen Maier authored
commit 819732be upstream. v2.6.27 commit cc8c2829 ("[SCSI] zfcp: Automatically attach remote ports") introduced zfcp automatic port scan. Before that, the user had to use the sysfs attribute "port_add" of an FCP device (adapter) to add and open remote (target) ports, even for the remote peer port in point-to-point topology. That code path did a proper port open recovery trigger taking the erp_lock. Since above commit, a new helper function zfcp_erp_open_ptp_port() performed an UNlocked port open recovery trigger. This can race with other parallel recovery triggers. In zfcp_erp_action_enqueue() this could corrupt e.g. adapter->erp_total_count or adapter->erp_ready_head. As already found for fabric topology in v4.17 commit fa89adba ("scsi: zfcp: fix infinite iteration on ERP ready list"), there was an endless loop during tracing of rport (un)block. A subsequent v4.18 commit 9e156c54 ("scsi: zfcp: assert that the ERP lock is held when tracing a recovery trigger") introduced a lockdep assertion for that case. As a side effect, that lockdep assertion now uncovered the unlocked code path for PtP. It is from within an adapter ERP action: zfcp_erp_strategy[1479] intentionally DROPs erp lock around zfcp_erp_strategy_do_action() zfcp_erp_strategy_do_action[1441] NO erp lock zfcp_erp_adapter_strategy[876] NO erp lock zfcp_erp_adapter_strategy_open[855] NO erp lock zfcp_erp_adapter_strategy_open_fsf[806]NO erp lock zfcp_erp_adapter_strat_fsf_xconf[772] erp lock only around zfcp_erp_action_to_running(), BUT *_not_* around zfcp_erp_enqueue_ptp_port() zfcp_erp_enqueue_ptp_port[728] BUG: *_not_* taking erp lock _zfcp_erp_port_reopen[432] assumes to be called with erp lock zfcp_erp_action_enqueue[314] assumes to be called with erp lock zfcp_dbf_rec_trig[288] _checks_ to be called with erp lock: lockdep_assert_held(&adapter->erp_lock); It causes the following lockdep warning: WARNING: CPU: 2 PID: 775 at drivers/s390/scsi/zfcp_dbf.c:288 zfcp_dbf_rec_trig+0x16a/0x188 no locks held by zfcperp0.0.17c0/775. Fix this by using the proper locked recovery trigger helper function. Link: https://lore.kernel.org/r/20200312174505.51294-2-maier@linux.ibm.com Fixes: cc8c2829 ("[SCSI] zfcp: Automatically attach remote ports") Cc: <stable@vger.kernel.org> #v2.6.27+ Reviewed-by:
Jens Remus <jremus@linux.ibm.com> Reviewed-by:
Benjamin Block <bblock@linux.ibm.com> Signed-off-by:
Steffen Maier <maier@linux.ibm.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Shetty, Harshini X (EXT-Sony Mobile) authored
commit 75fa6019 upstream. Fix below kmemleak detected in verity_fec_ctr. output_pool is allocated for each dm-verity-fec device. But it is not freed when dm-table for the verity target is removed. Hence free the output mempool in destructor function verity_fec_dtr. unreferenced object 0xffffffffa574d000 (size 4096): comm "init", pid 1667, jiffies 4294894890 (age 307.168s) hex dump (first 32 bytes): 8e 36 00 98 66 a8 0b 9b 00 00 00 00 00 00 00 00 .6..f........... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<0000000060e82407>] __kmalloc+0x2b4/0x340 [<00000000dd99488f>] mempool_kmalloc+0x18/0x20 [<000000002560172b>] mempool_init_node+0x98/0x118 [<000000006c3574d2>] mempool_init+0x14/0x20 [<0000000008cb266e>] verity_fec_ctr+0x388/0x3b0 [<000000000887261b>] verity_ctr+0x87c/0x8d0 [<000000002b1e1c62>] dm_table_add_target+0x174/0x348 [<000000002ad89eda>] table_load+0xe4/0x328 [<000000001f06f5e9>] dm_ctl_ioctl+0x3b4/0x5a0 [<00000000bee5fbb7>] do_vfs_ioctl+0x5dc/0x928 [<00000000b475b8f5>] __arm64_sys_ioctl+0x70/0x98 [<000000005361e2e8>] el0_svc_common+0xa0/0x158 [<000000001374818f>] el0_svc_handler+0x6c/0x88 [<000000003364e9f4>] el0_svc+0x8/0xc [<000000009d84cec9>] 0xffffffffffffffff Fixes: a739ff3f ("dm verity: add support for forward error correction") Depends-on: 6f1c819c ("dm: convert to bioset_init()/mempool_init()") Cc: stable@vger.kernel.org Signed-off-by:
Harshini Shetty <harshini.x.shetty@sony.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Alexander Duyck authored
commit 86447726 upstream. This patch replaces the size + 1 value introduced with the recent fix for 1 byte allocs with a constant value. The idea here is to reduce code overhead as the previous logic would have to read size into a register, then increment it, and write it back to whatever field was being used. By using a constant we can avoid those memory reads and arithmetic operations in favor of just encoding the maximum value into the operation itself. Fixes: 2c2ade81 ("mm: page_alloc: fix ref bias in page_frag_alloc() for 1-byte allocs") Signed-off-by:
Alexander Duyck <alexander.h.duyck@linux.intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Anssi Hannula authored
commit 82f04bfe upstream. Commit 0161a94e ("tools: gpio: Correctly add make dependencies for gpio_utils") added a make rule for gpio-utils-in.o but used $(output) instead of the correct $(OUTPUT) for the output directory, breaking out-of-tree build (O=xx) with the following error: No rule to make target 'out/tools/gpio/gpio-utils-in.o', needed by 'out/tools/gpio/lsgpio-in.o'. Stop. Fix that. Fixes: 0161a94e ("tools: gpio: Correctly add make dependencies for gpio_utils") Cc: <stable@vger.kernel.org> Cc: Laura Abbott <labbott@redhat.com> Signed-off-by:
Anssi Hannula <anssi.hannula@bitwise.fi> Link: https://lore.kernel.org/r/20200325103154.32235-1-anssi.hannula@bitwise.fiReviewed-by:
Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Zhenzhong Duan authored
commit 34d66caf upstream. With commit a74cfffb ("x86/speculation: Rework SMT state change"), arch_smt_update() is invoked from each individual CPU hotplug function. Therefore the extra arch_smt_update() call in the sysfs SMT control is redundant. Fixes: a74cfffb ("x86/speculation: Rework SMT state change") Signed-off-by:
Zhenzhong Duan <zhenzhong.duan@oracle.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: <konrad.wilk@oracle.com> Cc: <dwmw@amazon.co.uk> Cc: <bp@suse.de> Cc: <srinivas.eeda@oracle.com> Cc: <peterz@infradead.org> Cc: <hpa@zytor.com> Link: https://lkml.kernel.org/r/e2e064f2-e8ef-42ca-bf4f-76b612964752@default Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Takashi Iwai authored
commit 183ab39e upstream. The recent commit 98081ca6 ("ALSA: hda - Record the current power state before suspend/resume calls") made the HD-audio driver to store the PM state in power_state field. This forgot, however, the initialization at power up. Although the codec drivers usually don't need to refer to this field in the normal operation, let's initialize it properly for consistency. Fixes: 98081ca6 ("ALSA: hda - Record the current power state before suspend/resume calls") Signed-off-by:
Takashi Iwai <tiwai@suse.de> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Rosioru Dragos authored
commit fa03481b upstream. The incorrect traversal of the scatterlist, during the linearization phase lead to computing the hash value of the wrong input buffer. New implementation uses scatterwalk_map_and_copy() to address this issue. Cc: <stable@vger.kernel.org> Fixes: 15b59e7c ("crypto: mxs - Add Freescale MXS DCP driver") Signed-off-by:
Rosioru Dragos <dragos.rosioru@nxp.com> Reviewed-by:
Horia Geantă <horia.geanta@nxp.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Josef Bacik authored
commit 8e19c973 upstream. If we have an error while building the backref tree in relocation we'll process all the pending edges and then free the node. However if we integrated some edges into the cache we'll lose our link to those edges by simply freeing this node, which means we'll leak memory and references to any roots that we've found. Instead we need to use remove_backref_node(), which walks through all of the edges that are still linked to this node and free's them up and drops any root references we may be holding. CC: stable@vger.kernel.org # 4.9+ Reviewed-by:
Qu Wenruo <wqu@suse.com> Signed-off-by:
Josef Bacik <josef@toxicpanda.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Vitaly Kuznetsov authored
commit dbef2808 upstream. If KVM wasn't used at all before we crash the cleanup procedure fails with BUG: unable to handle page fault for address: ffffffffffffffc8 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 23215067 P4D 23215067 PUD 23217067 PMD 0 Oops: 0000 [#8] SMP PTI CPU: 0 PID: 3542 Comm: bash Kdump: loaded Tainted: G D 5.6.0-rc2+ #823 RIP: 0010:crash_vmclear_local_loaded_vmcss.cold+0x19/0x51 [kvm_intel] The root cause is that loaded_vmcss_on_cpu list is not yet initialized, we initialize it in hardware_enable() but this only happens when we start a VM. Previously, we used to have a bitmap with enabled CPUs and that was preventing [masking] the issue. Initialized loaded_vmcss_on_cpu list earlier, right before we assign crash_vmclear_loaded_vmcss pointer. blocked_vcpu_on_cpu list and blocked_vcpu_on_cpu_lock are moved altogether for consistency. Fixes: 31603d4f ("KVM: VMX: Always VMCLEAR in-use VMCSes during crash with kexec support") Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20200401081348.1345307-1-vkuznets@redhat.com> Reviewed-by:
Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Sean Christopherson authored
commit 31603d4f upstream. VMCLEAR all in-use VMCSes during a crash, even if kdump's NMI shootdown interrupted a KVM update of the percpu in-use VMCS list. Because NMIs are not blocked by disabling IRQs, it's possible that crash_vmclear_local_loaded_vmcss() could be called while the percpu list of VMCSes is being modified, e.g. in the middle of list_add() in vmx_vcpu_load_vmcs(). This potential corner case was called out in the original commit[*], but the analysis of its impact was wrong. Skipping the VMCLEARs is wrong because it all but guarantees that a loaded, and therefore cached, VMCS will live across kexec and corrupt memory in the new kernel. Corruption will occur because the CPU's VMCS cache is non-coherent, i.e. not snooped, and so the writeback of VMCS memory on its eviction will overwrite random memory in the new kernel. The VMCS will live because the NMI shootdown also disables VMX, i.e. the in-progress VMCLEAR will #UD, and existing Intel CPUs do not flush the VMCS cache on VMXOFF. Furthermore, interrupting list_add() and list_del() is safe due to crash_vmclear_local_loaded_vmcss() using forward iteration. list_add() ensures the new entry is not visible to forward iteration unless the entire add completes, via WRITE_ONCE(prev->next, new). A bad "prev" pointer could be observed if the NMI shootdown interrupted list_del() or list_add(), but list_for_each_entry() does not consume ->prev. In addition to removing the temporary disabling of VMCLEAR, open code loaded_vmcs_init() in __loaded_vmcs_clear() and reorder VMCLEAR so that the VMCS is deleted from the list only after it's been VMCLEAR'd. Deleting the VMCS before VMCLEAR would allow a race where the NMI shootdown could arrive between list_del() and vmcs_clear() and thus neither flow would execute a successful VMCLEAR. Alternatively, more code could be moved into loaded_vmcs_init(), but that gets rather silly as the only other user, alloc_loaded_vmcs(), doesn't need the smp_wmb() and would need to work around the list_del(). Update the smp_*() comments related to the list manipulation, and opportunistically reword them to improve clarity. [*] https://patchwork.kernel.org/patch/1675731/#3720461 Fixes: 8f536b76 ("KVM: VMX: provide the vmclear function and a bitmap to support VMCLEAR in kdump") Cc: stable@vger.kernel.org Signed-off-by:
-
Sean Christopherson authored
commit edd4fa37 upstream. Reallocate a rmap array and recalcuate large page compatibility when moving an existing memslot to correctly handle the alignment properties of the new memslot. The number of rmap entries required at each level is dependent on the alignment of the memslot's base gfn with respect to that level, e.g. moving a large-page aligned memslot so that it becomes unaligned will increase the number of rmap entries needed at the now unaligned level. Not updating the rmap array is the most obvious bug, as KVM accesses garbage data beyond the end of the rmap. KVM interprets the bad data as pointers, leading to non-canonical #GPs, unexpected #PFs, etc... general protection fault: 0000 [#1] SMP CPU: 0 PID: 1909 Comm: move_memory_reg Not tainted 5.4.0-rc7+ #139 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:rmap_get_first+0x37/0x50 [kvm] Code: <48> 8b 3b 48 85 ff 74 ec e8 6c f4 ff ff 85 c0 74 e3 48 89 d8 5b c3 RSP: 0018:ffffc9000021bbc8 EFLAGS: 00010246 RAX: ffff00617461642e RBX: ffff00617461642e RCX: 0000000000000012 RDX: ffff88827400f568 RSI: ffffc9000021bbe0 RDI: ffff88827400f570 RBP: 0010000000000000 R08: ffffc9000021bd00 R09: ffffc9000021bda8 R10: ffffc9000021bc48 R11: 0000000000000000 R12: 0030000000000000 R13: 0000000000000000 R14: ffff88827427d700 R15: ffffc9000021bce8 FS: 00007f7eda014700(0000) GS:ffff888277a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f7ed9216ff8 CR3: 0000000274391003 CR4: 0000000000162eb0 Call Trace: kvm_mmu_slot_set_dirty+0xa1/0x150 [kvm] __kvm_set_memory_region.part.64+0x559/0x960 [kvm] kvm_set_memory_region+0x45/0x60 [kvm] kvm_vm_ioctl+0x30f/0x920 [kvm] do_vfs_ioctl+0xa1/0x620 ksys_ioctl+0x66/0x70 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x4c/0x170 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f7ed9911f47 Code: <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 21 6f 2c 00 f7 d8 64 89 01 48 RSP: 002b:00007ffc00937498 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 0000000001ab0010 RCX: 00007f7ed9911f47 RDX: 0000000001ab1350 RSI: 000000004020ae46 RDI: 0000000000000004 RBP: 000000000000000a R08: 0000000000000000 R09: 00007f7ed9214700 R10: 00007f7ed92149d0 R11: 0000000000000246 R12: 00000000bffff000 R13: 0000000000000003 R14: 00007f7ed9215000 R15: 0000000000000000 Modules linked in: kvm_intel kvm irqbypass ---[ end trace 0c5f570b3358ca89 ]--- The disallow_lpage tracking is more subtle. Failure to update results in KVM creating large pages when it shouldn't, either due to stale data or again due to indexing beyond the end of the metadata arrays, which can lead to memory corruption and/or leaking data to guest/userspace. Note, the arrays for the old memslot are freed by the unconditional call to kvm_free_memslot() in __kvm_set_memory_region(). Fixes: 05da4558 ("KVM: MMU: large page support") Cc: stable@vger.kernel.org Signed-off-by:
Peter Xu <peterx@redhat.com> Signed-off-by:
-
David Hildenbrand authored
commit 4d4cee96 upstream. Whenever we get an -EFAULT, we failed to read in guest 2 physical address space. Such addressing exceptions are reported via a program intercept to the nested hypervisor. We faked the intercept, we have to return to guest 2. Instead, right now we would be returning -EFAULT from the intercept handler, eventually crashing the VM. the correct thing to do is to return 1 as rc == 1 is the internal representation of "we have to go back into g2". Addressing exceptions can only happen if the g2->g3 page tables reference invalid g2 addresses (say, either a table or the final page is not accessible - so something that basically never happens in sane environments. Identified by manual code inspection. Fixes: a3508fbe ("KVM: s390: vsie: initial support for nested virtualization") Cc: <stable@vger.kernel.org> # v4.8+ Signed-off-by:
David Hildenbrand <david@redhat.com> Link: https://lore.kernel.org/r/20200403153050.20569-3-david@redhat.comReviewed-by:
Claudio Imbrenda <imbrenda@linux.ibm.com> Reviewed-by:
Christian Borntraeger <borntraeger@de.ibm.com> [borntraeger@de.ibm.com: fix patch description] Signed-off-by:
-
David Hildenbrand authored
commit a1d032a4 upstream. In case we have a region 1 the following calculation (31 + ((gmap->asce & _ASCE_TYPE_MASK) >> 2)*11) results in 64. As shifts beyond the size are undefined the compiler is free to use instructions like sllg. sllg will only use 6 bits of the shift value (here 64) resulting in no shift at all. That means that ALL addresses will be rejected. The can result in endless loops, e.g. when prefix cannot get mapped. Fixes: 4be130a0 ("s390/mm: add shadow gmap support") Tested-by:
Janosch Frank <frankja@linux.ibm.com> Reported-by:
-
Thomas Gleixner authored
commit 3d51507f upstream. All exception entry points must have ASM_CLAC right at the beginning. The general_protection entry is missing one. Fixes: e59d1b0a ("x86-32, smap: Add STAC/CLAC instructions to 32-bit kernel entry") Signed-off-by:
Frederic Weisbecker <frederic@kernel.org> Reviewed-by:
Alexandre Chartre <alexandre.chartre@oracle.com> Reviewed-by:
Andy Lutomirski <luto@kernel.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20200225220216.219537887@linutronix.deSigned-off-by:
-
Eric W. Biederman authored
commit d1e7fd64 upstream. Replace the 32bit exec_id with a 64bit exec_id to make it impossible to wrap the exec_id counter. With care an attacker can cause exec_id wrap and send arbitrary signals to a newly exec'd parent. This bypasses the signal sending checks if the parent changes their credentials during exec. The severity of this problem can been seen that in my limited testing of a 32bit exec_id it can take as little as 19s to exec 65536 times. Which means that it can take as little as 14 days to wrap a 32bit exec_id. Adam Zabrocki has succeeded wrapping the self_exe_id in 7 days. Even my slower timing is in the uptime of a typical server. Which means self_exec_id is simply a speed bump today, and if exec gets noticably faster self_exec_id won't even be a speed bump. Extending self_exec_id to 64bits introduces a problem on 32bit architectures where reading self_exec_id is no longer atomic and can take two read instructions. Which means that is is possible to hit a window where the read value of exec_id does not match the written value. So with very lucky timing after this change this still remains expoiltable. I have updated the update of exec_id on exec to use WRITE_ONCE and the read of exec_id in do_notify_parent to use READ_ONCE to make it clear that there is no locking between these two locations. Link: https://lore.kernel.org/kernel-hardening/20200324215049.GA3710@pi3.com.pl Fixes: 2.3.23pre2 Cc: stable@vger.kernel.org Signed-off-by:
"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Remi Pommarel authored
commit 968ae2ca upstream. When TPC is disabled IEEE80211_CONF_CHANGE_POWER event can be handled to reconfigure HW's maximum txpower. This fixes 0dBm txpower setting when user attaches to an interface for the first time with the following scenario: ieee80211_do_open() ath9k_add_interface() ath9k_set_txpower() /* Set TX power with not yet initialized sc->hw->conf.power_level */ ieee80211_hw_config() /* Iniatilize sc->hw->conf.power_level and raise IEEE80211_CONF_CHANGE_POWER */ ath9k_config() /* IEEE80211_CONF_CHANGE_POWER is ignored */ This issue can be reproduced with the following: $ modprobe -r ath9k $ modprobe ath9k $ wpa_supplicant -i wlan0 -c /tmp/wpa.conf & $ iw dev /* Here TX power is either 0 or 3 depending on RF chain */ $ killall wpa_supplicant $ iw dev /* TX power goes back to calibrated value and subsequent calls will be fine */ Fixes: 283dd119 ("ath9k: add per-vif TX power capability") Cc: stable@vger.kernel.org Signed-off-by:
Remi Pommarel <repk@triplefau.lt> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Gustavo A. R. Silva authored
commit 792a402c upstream. There is a potential NULL pointer dereference in case kzalloc() fails and returns NULL. Fix this by adding a NULL check on *cd* This bug was detected with the help of Coccinelle. Fixes: 64b139f9 ("MIPS: OCTEON: irq: add CIB and other fixes") Cc: stable@vger.kernel.org Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by:
-
Sungbo Eo authored
commit 6a214a28 upstream. Clear its own IRQs before the parent IRQ get enabled, so that the remaining IRQs do not accidentally interrupt the parent IRQ controller. This patch also fixes a reboot bug on OX820 SoC, where the remaining rps-timer IRQ raises a GIC interrupt that is left pending. After that, the rps-timer IRQ is cleared during driver initialization, and there's no IRQ left in rps-irq when local_irq_enable() is called, which evokes an error message "unexpected IRQ trap". Fixes: bdd272cb ("irqchip: versatile FPGA: support cascaded interrupts from DT") Signed-off-by:
Sungbo Eo <mans0n@gorani.run> Signed-off-by:
Marc Zyngier <maz@kernel.org> Reviewed-by:
-
Yang Xu authored
commit 2e356101 upstream. Currently, when we add a new user key, the calltrace as below: add_key() key_create_or_update() key_alloc() __key_instantiate_and_link generic_key_instantiate key_payload_reserve ...... Since commit a08bf91c ("KEYS: allow reaching the keys quotas exactly"), we can reach max bytes/keys in key_alloc, but we forget to remove this limit when we reserver space for payload in key_payload_reserve. So we can only reach max keys but not max bytes when having delta between plen and type->def_datalen. Remove this limit when instantiating the key, so we can keep consistent with key_alloc. Also, fix the similar problem in keyctl_chown_key(). Fixes: 0b77f5bf ("keys: make the keyring quotas controllable through /proc/sys") Fixes: a08bf91c ("KEYS: allow reaching the keys quotas exactly") Cc: stable@vger.kernel.org # 5.0.x Cc: Eric Biggers <ebiggers@google.com> Signed-off-by:
Yang Xu <xuyang2018.jy@cn.fujitsu.com> Reviewed-by:
Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by:
-
Martin Blumenstingl authored
commit 3f5b9959 upstream. When CONFIG_DEVFREQ_THERMAL is disabled all functions except of_devfreq_cooling_register_power() were already inlined. Also inline the last function to avoid compile errors when multiple drivers call of_devfreq_cooling_register_power() when CONFIG_DEVFREQ_THERMAL is not set. Compilation failed with the following message: multiple definition of `of_devfreq_cooling_register_power' (which then lists all usages of of_devfreq_cooling_register_power()) Thomas Zimmermann reported this problem [0] on a kernel config with CONFIG_DRM_LIMA={m,y}, CONFIG_DRM_PANFROST={m,y} and CONFIG_DEVFREQ_THERMAL=n after both, the lima and panfrost drivers gained devfreq cooling support. [0] https://www.spinics.net/lists/dri-devel/msg252825.html Fixes: a76caf55 ("thermal: Add devfreq cooling") Cc: stable@vger.kernel.org Reported-by:
Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by:
Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200403205133.1101808-1-martin.blumenstingl@googlemail.comSigned-off-by:
-
Jan Engelhardt authored
commit ecb9c790 upstream. The value in "new" is constructed from "old" such that all bits defined as reserved by the ACPI spec[1] are left untouched. But if those bits do not happen to be all zero, "new < 3" will not evaluate to true. The firmware of the laptop(s) Medion MD63490 / Akoya P15648 comes with garbage inside the "FACS" ACPI table. The starting value is old=0x4944454d, therefore new=0x4944454e, which is >= 3. Mask off the reserved bits. [1] https://uefi.org/sites/default/files/resources/ACPI_6_2.pdf Link: https://bugzilla.kernel.org/show_bug.cgi?id=206553 Cc: All applicable <stable@vger.kernel.org> Signed-off-by:
Jan Engelhardt <jengelh@inai.de> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Benoit Parrot authored
commit 1db56284 upstream. disable_irqs() was mistakenly disabling all interrupts when called. This cause all port stream to stop even if only stopping one of them. Cc: stable <stable@vger.kernel.org> Signed-off-by:
Benoit Parrot <bparrot@ti.com> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by:
-
Takashi Iwai authored
commit ae769d35 upstream. The recent fix for the OOB access in PCM OSS plugins (commit f2ecf903: "ALSA: pcm: oss: Avoid plugin buffer overflow") caused a regression on OSS applications. The patch introduced the size check in client and slave size calculations to limit to each plugin's buffer size, but I overlooked that some code paths call those without allocating the buffer but just for estimation. This patch fixes the bug by skipping the size check for those code paths while keeping checking in the actual transfer calls. Fixes: f2ecf903 ("ALSA: pcm: oss: Avoid plugin buffer overflow") Tested-and-reported-by:
Jari Ruusu <jari.ruusu@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200403072515.25539-1-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
commit c47914c0 upstream. The access to Analog Capture Source control value implemented in prodigy_hifi.c is wrong, as caught by the recently introduced sanity check; it should be accessing value.enumerated.item[] instead of value.integer.value[]. This patch corrects the wrong access pattern. Fixes: 6b8d6e55 ("[ALSA] ICE1724: Added support for Audiotrak Prodigy 7.1 HiFi & HD2, Hercules Fortissimo IV") BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207139Reviewed-by:
Jaroslav Kysela <perex@perex.cz> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200407084402.25589-3-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
commit 0ad3f0b3 upstream. The beep control helper function blindly stores the values in two stereo channels no matter whether the actual control is mono or stereo. This is practically harmless, but it annoys the recently introduced sanity check, resulting in an error when the checker is enabled. This patch corrects the behavior to store only on the defined array member. Fixes: 0401e854 ("ALSA: hda - Move beep helper functions to hda_beep.c") BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207139Reviewed-by:
-
Takashi Iwai authored
commit 3c6fd1f0 upstream. The recent AMD platform exposes an HD-audio bus but without any actual codecs, which is internally tied with a USB-audio device, supposedly. It results in "no codecs" error of HD-audio bus driver, and it's nothing but a waste of resources. This patch introduces a static blacklist table for skipping such a known bogus PCI SSID entry. As of writing this patch, the known SSIDs are: * 1043:874f - ASUS ROG Zenith II / Strix * 1462:cb59 - MSI TRX40 Creator * 1462:cb60 - MSI TRX40 BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=206543 Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200408140449.22319-2-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
commit 2a48218f upstream. Some recent boards (supposedly with a new AMD platform) contain the USB audio class 2 device that is often tied with HD-audio. The device exposes an Input Gain Pad control (id=19, control=12) but this node doesn't behave correctly, returning an error for each inquiry of GET_MIN and GET_MAX that should have been mandatory. As a workaround, simply ignore this node by adding a usbmix_name_map table entry. The currently known devices are: * 0414:a002 - Gigabyte TRX40 Aorus Pro WiFi * 0b05:1916 - ASUS ROG Zenith II * 0b05:1917 - ASUS ROG Strix * 0db0:0d64 - MSI TRX40 Creator * 0db0:543d - MSI TRX40 BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=206543 Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200408140449.22319-1-tiwai@suse.deSigned-off-by:
-
Thinh Nguyen authored
commit 5e5caf4f upstream. Different configuration/condition may draw different power. Inform the controller driver of the change so it can respond properly (e.g. GET_STATUS request). This fixes an issue with setting MaxPower from configfs. The composite driver doesn't check this value when setting self-powered. Cc: stable@vger.kernel.org Fixes: 88af8bbe ("usb: gadget: the start of the configfs interface") Signed-off-by:
Thinh Nguyen <thinhn@synopsys.com> Signed-off-by:
Felipe Balbi <balbi@kernel.org> Signed-off-by:
-
Sriharsha Allenki authored
commit f63ec55f upstream. In AIO case, the request is freed up if ep_queue fails. However, io_data->req still has the reference to this freed request. In the case of this failure if there is aio_cancel call on this io_data it will lead to an invalid dequeue operation and a potential use after free issue. Fix this by setting the io_data->req to NULL when the request is freed as part of queue failure. Fixes: 2e4c7553 ("usb: gadget: f_fs: add aio support") Signed-off-by:
Sriharsha Allenki <sallenki@codeaurora.org> CC: stable <stable@vger.kernel.org> Reviewed-by:
Peter Chen <peter.chen@nxp.com> Link: https://lore.kernel.org/r/20200326115620.12571-1-sallenki@codeaurora.orgSigned-off-by:
-
