Skip to content

L
linux
Switch branch/tag
  1. 16 Oct, 2021 1 commit
  3. 15 Oct, 2021 14 commits
  5. 14 Oct, 2021 15 commits
    • Linus Torvalds's avatar
      Merge tag 'net-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net · ec681c53
      Linus Torvalds authored 
      Pull networking fixes from Jakub Kicinski:
 "Quite calm.

  The noisy DSA driver (embedded switches) changes, and adjustment to
  IPv6 IOAM behavior add to diffstat's bottom line but are not scary.

  Current release - regressions:

   - af_unix: rename UNIX-DGRAM to UNIX to maintain backwards
     compatibility

   - procfs: revert "add seq_puts() statement for dev_mcast", minor
     format change broke user space

  Current release - new code bugs:

   - dsa: fix bridge_num not getting cleared after ports leaving the
     bridge, resource leak

   - dsa: tag_dsa: send packets with TX fwd offload from VLAN-unaware
     bridges using VID 0, prevent packet drops if pvid is removed

   - dsa: mv88e6xxx: keep the pvid at 0 when VLAN-unaware, prevent HW
     getting confused about station to VLAN mapping

  Previous releases - regressions:

   - virtio-net: fix for skb_over_panic inside big mode

   - phy: do not shutdown PHYs in READY state

   - dsa: mv88e6xxx: don't use PHY_DETECT on internal PHY's, fix link
     LED staying lit after ifdown

   - mptcp: fix possible infinite wait on recvmsg(MSG_WAITALL)

   - mqprio: Correct stats in mqprio_dump_class_stats()

   - ice: fix deadlock for Tx timestamp tracking flush

   - stmmac: fix feature detection on old hardware

  Previous releases - always broken:

   - sctp: account stream padding length for reconf chunk

   - icmp: fix icmp_ext_echo_iio parsing in icmp_build_probe()

   - isdn: cpai: check ctr->cnr to avoid array index out of bound

   - isdn: mISDN: fix sleeping function called from invalid context

   - nfc: nci: fix potential UAF of rf_conn_info object

   - dsa: microchip: prevent ksz_mib_read_work from kicking back in
     after it's canceled in .remove and crashing

   - dsa: mv88e6xxx: isolate the ATU databases of standalone and bridged
     ports

   - dsa: sja1105, ocelot: break circular dependency between switch and
     tag drivers

   - dsa: felix: improve timestamping in presence of packe loss

   - mlxsw: thermal: fix out-of-bounds memory accesses

  Misc:

   - ipv6: ioam: move the check for undefined bits to improve
     interoperability"

* tag 'net-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (60 commits)
  icmp: fix icmp_ext_echo_iio parsing in icmp_build_probe
  MAINTAINERS: Update the devicetree documentation path of imx fec driver
  sctp: account stream padding length for reconf chunk
  mlxsw: thermal: Fix out-of-bounds memory accesses
  ethernet: s2io: fix setting mac address during resume
  NFC: digital: fix possible memory leak in digital_in_send_sdd_req()
  NFC: digital: fix possible memory leak in digital_tg_listen_mdaa()
  nfc: fix error handling of nfc_proto_register()
  Revert "net: procfs: add seq_puts() statement for dev_mcast"
  net: encx24j600: check error in devm_regmap_init_encx24j600
  net: korina: select CRC32
  net: arc: select CRC32
  net: dsa: felix: break at first CPU port during init and teardown
  net: dsa: tag_ocelot_8021q: fix inability to inject STP BPDUs into BLOCKING ports
  net: dsa: felix: purge skb from TX timestamping queue if it cannot be sent
  net: dsa: tag_ocelot_8021q: break circular dependency with ocelot switch lib
  net: dsa: tag_ocelot: break circular dependency with ocelot switch lib driver
  net: mscc: ocelot: cross-check the sequence id from the timestamp FIFO with the skb PTP header
  net: mscc: ocelot: deny TX timestamping of non-PTP packets
  net: mscc: ocelot: warn when a PTP IRQ is raised for an unknown skb
  ...
      ec681c53
    • Xin Long's avatar
      icmp: fix icmp_ext_echo_iio parsing in icmp_build_probe · 1fcd7945
      Xin Long authored 
      In icmp_build_probe(), the icmp_ext_echo_iio parsing should be done
step by step and skb_header_pointer() return value should always be
checked, this patch fixes 3 places in there:

  - On case ICMP_EXT_ECHO_CTYPE_NAME, it should only copy ident.name
    from skb by skb_header_pointer(), its len is ident_len. Besides,
    the return value of skb_header_pointer() should always be checked.

  - On case ICMP_EXT_ECHO_CTYPE_INDEX, move ident_len check ahead of
    skb_header_pointer(), and also do the return value check for
    skb_header_pointer().

  - On case ICMP_EXT_ECHO_CTYPE_ADDR, before accessing iio->ident.addr.
    ctype3_hdr.addrlen, skb_header_pointer() should be called first,
    then check its return value and ident_len.
    On subcases ICMP_AFI_IP and ICMP_AFI_IP6, also do check for ident.
    addr.ctype3_hdr.addrlen and skb_header_pointer()'s return value.
    On subcase ICMP_AFI_IP, the len for skb_header_pointer() should be
    "sizeof(iio->extobj_hdr) + sizeof(iio->ident.addr.ctype3_hdr) +
    sizeof(struct in_addr)" or "ident_len".

v1->v2:
  - To make it more clear, call skb_header_pointer() once only for
    iio->indent's parsing as Jakub Suggested.
v2->v3:
  - The extobj_hdr.length check against sizeof(_iio) should be done
    before calling skb_header_pointer(), as Eric noticed.

Fixes: d329ea5b ("icmp: add response to RFC 8335 PROBE messages")
Reported-by: default avatarDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: default avatarXin Long <lucien.xin@gmail.com>
Reviewed-by: default avatarEric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/31628dd76657ea62f5cf78bb55da6b35240831f1.1634205050.git.lucien.xin@gmail.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      1fcd7945
    • Cai Huoqing's avatar
      MAINTAINERS: Update the devicetree documentation path of imx fec driver · ea142b09
      Cai Huoqing authored 
      Change the devicetree documentation path
to "Documentation/devicetree/bindings/net/fsl,fec.yaml"
since 'fsl-fec.txt' has been converted to 'fsl,fec.yaml' already.
Signed-off-by: default avatarCai Huoqing <caihuoqing@baidu.com>
Link: https://lore.kernel.org/r/20211014110214.3254-1-caihuoqing@baidu.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      ea142b09
    • Eiichi Tsukata's avatar
      sctp: account stream padding length for reconf chunk · a2d859e3
      Eiichi Tsukata authored 
      sctp_make_strreset_req() makes repeated calls to sctp_addto_chunk()
which will automatically account for padding on each call. inreq and
outreq are already 4 bytes aligned, but the payload is not and doing
SCTP_PAD4(a + b) (which _sctp_make_chunk() did implicitly here) is
different from SCTP_PAD4(a) + SCTP_PAD4(b) and not enough. It led to
possible attempt to use more buffer than it was allocated and triggered
a BUG_ON.

Cc: Vlad Yasevich <vyasevich@gmail.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Fixes: cc16f00f ("sctp: add support for generating stream reconf ssn reset request chunk")
Reported-by: default avatarEiichi Tsukata <eiichi.tsukata@nutanix.com>
Signed-off-by: default avatarEiichi Tsukata <eiichi.tsukata@nutanix.com>
Signed-off-by: default avatarMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: default avatarMarcelo Ricardo Leitner <mleitner@redhat.com>
Reviewed-by: default avatarXin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/r/b97c1f8b0c7ff79ac4ed206fc2c49d3612e0850c.1634156849.git.mleitner@redhat.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      a2d859e3
    • Ido Schimmel's avatar
      mlxsw: thermal: Fix out-of-bounds memory accesses · 332fdf95
      Ido Schimmel authored 
      Currently, mlxsw allows cooling states to be set above the maximum
cooling state supported by the driver:

 # cat /sys/class/thermal/thermal_zone2/cdev0/type
 mlxsw_fan
 # cat /sys/class/thermal/thermal_zone2/cdev0/max_state
 10
 # echo 18 > /sys/class/thermal/thermal_zone2/cdev0/cur_state
 # echo $?
 0

This results in out-of-bounds memory accesses when thermal state
transition statistics are enabled (CONFIG_THERMAL_STATISTICS=y), as the
transition table is accessed with a too large index (state) [1].

According to the thermal maintainer, it is the responsibility of the
driver to reject such operations [2].

Therefore, return an error when the state to be set exceeds the maximum
cooling state supported by the driver.

To avoid dead code, as suggested by the thermal maintainer [3],
partially revert commit a421ce08 ("mlxsw: core: Extend cooling
device with cooling levels") that tried to interpret these invalid
cooling states (above the maximum) in a special way. The cooling levels
array is not removed in order to prevent the fans going below 20% PWM,
which would cause them to get stuck at 0% PWM.

[1]
BUG: KASAN: slab-out-of-bounds in thermal_cooling_device_stats_update+0x271/0x290
Read of size 4 at addr ffff8881052f7bf8 by task kworker/0:0/5

CPU: 0 PID: 5 Comm: kworker/0:0 Not tainted 5.15.0-rc3-custom-45935-gce1adf704b14 #122
Hardware name: Mellanox Technologies Ltd. "MSN2410-CB2FO"/"SA000874", BIOS 4.6.5 03/08/2016
Workqueue: events_freezable_power_ thermal_zone_device_check
Call Trace:
 dump_stack_lvl+0x8b/0xb3
 print_address_description.constprop.0+0x1f/0x140
 kasan_report.cold+0x7f/0x11b
 thermal_cooling_device_stats_update+0x271/0x290
 __thermal_cdev_update+0x15e/0x4e0
 thermal_cdev_update+0x9f/0xe0
 step_wise_throttle+0x770/0xee0
 thermal_zone_device_update+0x3f6/0xdf0
 process_one_work+0xa42/0x1770
 worker_thread+0x62f/0x13e0
 kthread+0x3ee/0x4e0
 ret_from_fork+0x1f/0x30

Allocated by task 1:
 kasan_save_stack+0x1b/0x40
 __kasan_kmalloc+0x7c/0x90
 thermal_cooling_device_setup_sysfs+0x153/0x2c0
 __thermal_cooling_device_register.part.0+0x25b/0x9c0
 thermal_cooling_device_register+0xb3/0x100
 mlxsw_thermal_init+0x5c5/0x7e0
 __mlxsw_core_bus_device_register+0xcb3/0x19c0
 mlxsw_core_bus_device_register+0x56/0xb0
 mlxsw_pci_probe+0x54f/0x710
 local_pci_probe+0xc6/0x170
 pci_device_probe+0x2b2/0x4d0
 really_probe+0x293/0xd10
 __driver_probe_device+0x2af/0x440
 driver_probe_device+0x51/0x1e0
 __driver_attach+0x21b/0x530
 bus_for_each_dev+0x14c/0x1d0
 bus_add_driver+0x3ac/0x650
 driver_register+0x241/0x3d0
 mlxsw_sp_module_init+0xa2/0x174
 do_one_initcall+0xee/0x5f0
 kernel_init_freeable+0x45a/0x4de
 kernel_init+0x1f/0x210
 ret_from_fork+0x1f/0x30

The buggy address belongs to the object at ffff8881052f7800
 which belongs to the cache kmalloc-1k of size 1024
The buggy address is located 1016 bytes inside of
 1024-byte region [ffff8881052f7800, ffff8881052f7c00)
The buggy address belongs to the page:
page:0000000052355272 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1052f0
head:0000000052355272 order:3 compound_mapcount:0 compound_pincount:0
flags: 0x200000000010200(slab|head|node=0|zone=2)
raw: 0200000000010200 ffffea0005034800 0000000300000003 ffff888100041dc0
raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff8881052f7a80: 00 00 00 00 00 00 04 fc fc fc fc fc fc fc fc fc
 ffff8881052f7b00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff8881052f7b80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
                                                                ^
 ffff8881052f7c00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
 ffff8881052f7c80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc

[2] https://lore.kernel.org/linux-pm/9aca37cb-1629-5c67-1895-1fdc45c0244e@linaro.org/
[3] https://lore.kernel.org/linux-pm/af9857f2-578e-de3a-e62b-6baff7e69fd4@linaro.org/

CC: Daniel Lezcano <daniel.lezcano@linaro.org>
Fixes: a50c1e35 ("mlxsw: core: Implement thermal zone")
Fixes: a421ce08 ("mlxsw: core: Extend cooling device with cooling levels")
Signed-off-by: default avatarIdo Schimmel <idosch@nvidia.com>
Tested-by: default avatarVadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20211012174955.472928-1-idosch@idosch.orgSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      332fdf95
    • Arnd Bergmann's avatar
      ethernet: s2io: fix setting mac address during resume · 40507e7a
      Arnd Bergmann authored 
      After recent cleanups, gcc started warning about a suspicious
memcpy() call during the s2io_io_resume() function:

In function '__dev_addr_set',
    inlined from 'eth_hw_addr_set' at include/linux/etherdevice.h:318:2,
    inlined from 's2io_set_mac_addr' at drivers/net/ethernet/neterion/s2io.c:5205:2,
    inlined from 's2io_io_resume' at drivers/net/ethernet/neterion/s2io.c:8569:7:
arch/x86/include/asm/string_32.h:182:25: error: '__builtin_memcpy' accessing 6 bytes at offsets 0 and 2 overlaps 4 bytes at offset 2 [-Werror=restrict]
  182 | #define memcpy(t, f, n) __builtin_memcpy(t, f, n)
      |                         ^~~~~~~~~~~~~~~~~~~~~~~~~
include/linux/netdevice.h:4648:9: note: in expansion of macro 'memcpy'
 4648 |         memcpy(dev->dev_addr, addr, len);
      |         ^~~~~~

What apparently happened is that an old cleanup changed the calling
conventions for s2io_set_mac_addr() from taking an ethernet address
as a character array to taking a struct sockaddr, but one of the
callers was not changed at the same time.

Change it to instead call the low-level do_s2io_prog_unicast() function
that still takes the old argument type.

Fixes: 2fd37688 ("S2io: Added support set_mac_address driver entry point")
Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20211013143613.2049096-1-arnd@kernel.orgSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      40507e7a
    • Dinh Nguyen's avatar
      MAINTAINERS: Update entry for the Stratix10 firmware · 26d65741
      Dinh Nguyen authored 
      Richard Gong is no longer at Intel, so update the MAINTAINER's entry for
the Stratix10 firmware drivers.
Signed-off-by: default avatarDinh Nguyen <dinguyen@kernel.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      26d65741
    • Linus Torvalds's avatar
      Merge tag 'sound-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound · 1626d9a3
      Linus Torvalds authored 
      Pull sound fixes from Takashi Iwai:
 "This contains quite a few device-specific fixes for usual HD- and
  USB-audio in addition to a couple of ALSA core fixes (a UAF fix in
  sequencer and a fix for a misplaced PCM 32bit compat ioctl).

  Nothing really stands out"

* tag 'sound-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: usb-audio: Add quirk for VF0770
  ALSA: hda: avoid write to STATESTS if controller is in reset
  ALSA: hda/realtek: Fix the mic type detection issue for ASUS G551JW
  ALSA: pcm: Workaround for a wrong offset in SYNC_PTR compat ioctl
  ALSA: hda/realtek: Fix for quirk to enable speaker output on the Lenovo 13s Gen2
  ALSA: hda: intel: Allow repeatedly probing on codec configuration errors
  ALSA: hda/realtek: Add quirk for TongFang PHxTxX1
  ALSA: hda/realtek - ALC236 headset MIC recording issue
  ALSA: usb-audio: Enable rate validation for Scarlett devices
  ALSA: hda/realtek: Add quirk for Clevo X170KM-G
  ALSA: hda/realtek: Complete partial device name to avoid ambiguity
  ALSA: hda - Enable headphone mic on Dell Latitude laptops with ALC3254
  ALSA: seq: Fix a potential UAF by wrong private_free call order
  ALSA: hda/realtek: Enable 4-speaker output for Dell Precision 5560 laptop
  ALSA: usb-audio: Fix a missing error check in scarlett gen2 mixer
      1626d9a3
    • Uwe Kleine-König's avatar
      spi-mux: Fix false-positive lockdep splats · 16a8e2fb
      Uwe Kleine-König authored 
      io_mutex is taken by spi_setup() and spi-mux's .setup() callback calls
spi_setup() which results in a nested lock of io_mutex.

add_lock is taken by spi_add_device(). The device_add() call in there
can result in calling spi-mux's .probe() callback which registers its
own spi controller which in turn results in spi_add_device() being
called again.

To fix this initialize the controller's locks already in
spi_alloc_controller() to give spi_mux_probe() a chance to set the
lockdep subclass.
Signed-off-by: default avatarUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20211013133710.2679703-2-u.kleine-koenig@pengutronix.deSigned-off-by: default avatarMark Brown <broonie@kernel.org>
      16a8e2fb
    • Mark Brown's avatar
      spi: Fix deadlock when adding SPI controllers on SPI buses · 6098475d
      Mark Brown authored 
      Currently we have a global spi_add_lock which we take when adding new
devices so that we can check that we're not trying to reuse a chip
select that's already controlled.  This means that if the SPI device is
itself a SPI controller and triggers the instantiation of further SPI
devices we trigger a deadlock as we try to register and instantiate
those devices while in the process of doing so for the parent controller
and hence already holding the global spi_add_lock.  Since we only care
about concurrency within a single SPI bus move the lock to be per
controller, avoiding the deadlock.

This can be easily triggered in the case of spi-mux.
Reported-by: default avatarUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: default avatarMark Brown <broonie@kernel.org>
      6098475d
    • Jakub Kicinski's avatar
      Merge branch 'fix-two-possible-memory-leak-problems-in-nfc-digital-module' · cbcc5072
      Jakub Kicinski authored 
      Ziyang Xuan says:

====================
Fix two possible memory leak problems in NFC digital module.
====================

Link: https://lore.kernel.org/r/cover.1634111083.git.william.xuanziyang@huawei.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      cbcc5072
    • Ziyang Xuan's avatar
      NFC: digital: fix possible memory leak in digital_in_send_sdd_req() · 291c932f
      Ziyang Xuan authored 
      'skb' is allocated in digital_in_send_sdd_req(), but not free when
digital_in_send_cmd() failed, which will cause memory leak. Fix it
by freeing 'skb' if digital_in_send_cmd() return failed.

Fixes: 2c66daec ("NFC Digital: Add NFC-A technology support")
Signed-off-by: default avatarZiyang Xuan <william.xuanziyang@huawei.com>
Reviewed-by: default avatarKrzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      291c932f
    • Ziyang Xuan's avatar
      NFC: digital: fix possible memory leak in digital_tg_listen_mdaa() · 58e7dcc9
      Ziyang Xuan authored 
      'params' is allocated in digital_tg_listen_mdaa(), but not free when
digital_send_cmd() failed, which will cause memory leak. Fix it by
freeing 'params' if digital_send_cmd() return failed.

Fixes: 1c7a4c24 ("NFC Digital: Add target NFC-DEP support")
Signed-off-by: default avatarZiyang Xuan <william.xuanziyang@huawei.com>
Reviewed-by: default avatarKrzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      58e7dcc9
    • Ziyang Xuan's avatar
      nfc: fix error handling of nfc_proto_register() · 0911ab31
      Ziyang Xuan authored 
      When nfc proto id is using, nfc_proto_register() return -EBUSY error
code, but forgot to unregister proto. Fix it by adding proto_unregister()
in the error handling case.

Fixes: c7fe3b52 ("NFC: add NFC socket family")
Signed-off-by: default avatarZiyang Xuan <william.xuanziyang@huawei.com>
Reviewed-by: default avatarKrzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20211013034932.2833737-1-william.xuanziyang@huawei.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      0911ab31
    • Vladimir Oltean's avatar
      Revert "net: procfs: add seq_puts() statement for dev_mcast" · 1f922d9e
      Vladimir Oltean authored 
      This reverts commit ec18e845.

It turns out that there are user space programs which got broken by that
change. One example is the "ifstat" program shipped by Debian:
https://packages.debian.org/source/bullseye/ifstat
which, confusingly enough, seems to not have anything in common with the
much more familiar (at least to me) ifstat program from iproute2:
https://git.kernel.org/pub/scm/network/iproute2/iproute2.git/tree/misc/ifstat.c

root@debian:~# ifstat
ifstat: /proc/net/dev: unsupported format.

This change modified the header (first two lines of text) in
/proc/net/dev so that it looks like this:

root@debian:~# cat /proc/net/dev
Interface|                            Receive                                       |                                 Transmit
         |            bytes      packets errs   drop fifo frame compressed multicast|            bytes      packets errs   drop fifo colls carrier compressed
       lo:            97400         1204    0      0    0     0          0         0            97400         1204    0      0    0     0       0          0
    bond0:                0            0    0      0    0     0          0         0                0            0    0      0    0     0       0          0
     sit0:                0            0    0      0    0     0          0         0                0            0    0      0    0     0       0          0
     eno2:          5002206         6651    0      0    0     0          0         0        105518642      1465023    0      0    0     0       0          0
     swp0:           134531         2448    0      0    0     0          0         0         99599598      1464381    0      0    0     0       0          0
     swp1:                0            0    0      0    0     0          0         0                0            0    0      0    0     0       0          0
     swp2:          4867675         4203    0      0    0     0          0         0            58134          631    0      0    0     0       0          0
    sw0p0:                0            0    0      0    0     0          0         0                0            0    0      0    0     0       0          0
    sw0p1:           124739         2448    0   1422    0     0          0         0         93741184      1464369    0      0    0     0       0          0
    sw0p2:                0            0    0      0    0     0          0         0                0            0    0      0    0     0       0          0
    sw2p0:          4850863         4203    0      0    0     0          0         0            54722          619    0      0    0     0       0          0
    sw2p1:                0            0    0      0    0     0          0         0                0            0    0      0    0     0       0          0
    sw2p2:                0            0    0      0    0     0          0         0                0            0    0      0    0     0       0          0
    sw2p3:                0            0    0      0    0     0          0         0                0            0    0      0    0     0       0          0
      br0:            10508          212    0    212    0     0          0       212         61369558       958857    0      0    0     0       0          0

whereas before it looked like this:

root@debian:~# cat /proc/net/dev
Inter-|   Receive                                                |  Transmit
 face |bytes    packets errs drop fifo frame compressed multicast|bytes    packets errs drop fifo colls carrier compressed
    lo:   13160     164    0    0    0     0          0         0    13160     164    0    0    0     0       0          0
 bond0:       0       0    0    0    0     0          0         0        0       0    0    0    0     0       0          0
  sit0:       0       0    0    0    0     0          0         0        0       0    0    0    0     0       0          0
  eno2:   30824     268    0    0    0     0          0         0     3332      37    0    0    0     0       0          0
  swp0:       0       0    0    0    0     0          0         0        0       0    0    0    0     0       0          0
  swp1:       0       0    0    0    0     0          0         0        0       0    0    0    0     0       0          0
  swp2:   30824     268    0    0    0     0          0         0     2428      27    0    0    0     0       0          0
 sw0p0:       0       0    0    0    0     0          0         0        0       0    0    0    0     0       0          0
 sw0p1:       0       0    0    0    0     0          0         0        0       0    0    0    0     0       0          0
 sw0p2:       0       0    0    0    0     0          0         0        0       0    0    0    0     0       0          0
 sw2p0:   29752     268    0    0    0     0          0         0     1564      17    0    0    0     0       0          0
 sw2p1:       0       0    0    0    0     0          0         0        0       0    0    0    0     0       0          0
 sw2p2:       0       0    0    0    0     0          0         0        0       0    0    0    0     0       0          0
 sw2p3:       0       0    0    0    0     0          0         0        0       0    0    0    0     0       0          0

The reason why the ifstat shipped by Debian (v1.1, with a Debian patch
upgrading it to 1.1-8.1 at the time of writing) is broken is because its
"proc" driver/backend parses the header very literally:

main/drivers.c#L825
  if (!data->checked && strncmp(buf, "Inter-|", 7))
    goto badproc;

and there's no way in which the header can be changed such that programs
parsing like that would not get broken.

Even if we fix this ancient and very "lightly" maintained program to
parse the text output of /proc/net/dev in a more sensible way, this
story seems bound to repeat again with other programs, and modifying
them all could cause more trouble than it's worth. On the other hand,
the reverted patch had no other reason than an aesthetic one, so
reverting it is the simplest way out.

I don't know what other distributions would be affected; the fact that
Debian doesn't ship the iproute2 version of the program (a different
code base altogether, which uses netlink and not /proc/net/dev) is
surprising in itself.

Fixes: ec18e845 ("net: procfs: add seq_puts() statement for dev_mcast")
Link: https://lore.kernel.org/netdev/20211009163511.vayjvtn3rrteglsu@skbuf/
Cc: Yajun Deng <yajun.deng@linux.dev>
Cc: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: default avatarVladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20211013001909.3164185-1-vladimir.oltean@nxp.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      1f922d9e
  7. 13 Oct, 2021 10 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7