- 23 Jan, 2022 40 commits
-
-
Antoniu Miclaus authored
Add myself as maintainer for the ADMV1013 driver. Signed-off-by:
Antoniu Miclaus <antoniu.miclaus@analog.com> Link: https://lore.kernel.org/r/20220117070039.6139-2-antoniu.miclaus@analog.comSigned-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Antoniu Miclaus authored
Add myself as maintainer for the AD7293 driver. Signed-off-by:
-
Lars-Peter Clausen authored
sysfs_emit() is preferred over raw s*printf() for sysfs attributes since it knows about the sysfs buffer specifics and has some built-in checks for size and alignment. Use sysfs_emit() to format the custom `cleaning_period` device attribute of the sps30 driver. Signed-off-by:
Lars-Peter Clausen <lars@metafoo.de> Link: https://lore.kernel.org/r/20211216185217.1054495-14-lars@metafoo.deSigned-off-by:
-
Lars-Peter Clausen authored
sysfs_emit() is preferred over raw s*printf() for sysfs attributes since it knows about the sysfs buffer specifics and has some built-in checks for size and alignment. Use sysfs_emit() to format the custom `calibration_auto_enable` device attribute of the scd4x driver. Signed-off-by:
-
Lars-Peter Clausen authored
sysfs_emit() is preferred over raw s*printf() for sysfs attributes since it knows about the sysfs buffer specifics and has some built-in checks for size and alignment. Use sysfs_emit() to format the custom `battery_low` and `heater_enable` device attributes of the ms_sensors driver shared code. Signed-off-by:
-
Lars-Peter Clausen authored
sysfs_emit() is preferred over raw s*printf() for sysfs attributes since it knows about the sysfs buffer specifics and has some built-in checks for size and alignment. Use sysfs_emit() to format the custom `in_power_shunt_resistor` and `in_current_shunt_resistor` device attributes of the max9611 driver. Signed-off-by:
Jacopo Mondi <jacopo+renesas@jmondi.org> Link: https://lore.kernel.org/r/20211216185217.1054495-11-lars@metafoo.deSigned-off-by:
-
Lars-Peter Clausen authored
sysfs_emit() is preferred over raw s*printf() for sysfs attributes since it knows about the sysfs buffer specifics and has some built-in checks for size and alignment. Use sysfs_emit() to format the custom ``in_filter_notch_center_frequency` and fault_ovuv` device attributes of the max31865 driver. Signed-off-by:
-
Lars-Peter Clausen authored
sysfs_emit() is preferred over raw s*printf() for sysfs attributes since it knows about the sysfs buffer specifics and has some built-in checks for size and alignment. Use sysfs_emit() to format the custom `fault_ovuv`, `fault_oc` and `in_temp_filter_notch_center_frequency` device attributes of the max31856 driver. Signed-off-by:
-
Lars-Peter Clausen authored
sysfs_emit() is preferred over raw s*printf() for sysfs attributes since it knows about the sysfs buffer specifics and has some built-in checks for size and alignment. Use sysfs_emit() to format the custom device attributes of the lm3533 driver. Note this driver was using scnprintf correctly so this change is about ensuring examples of code that might get cut and paste into new drivers are using current best practice. Signed-off-by:
Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20211216185217.1054495-8-lars@metafoo.deSigned-off-by:
-
Lars-Peter Clausen authored
sysfs_emit() is preferred over raw s*printf() for sysfs attributes since it knows about the sysfs buffer specifics and has some built-in checks for size and alignment. Use sysfs_emit() to format the custom `in_allow_async_readout` device attribute of the ina2xx-adc driver. Signed-off-by:
-
Lars-Peter Clausen authored
sysfs_emit() is preferred over raw s*printf() for sysfs attributes since it knows about the sysfs buffer specifics and has some built-in checks for size and alignment. Use sysfs_emit() to format the custom `noise_level_tripped` device attribute of the as3935 driver. Signed-off-by:
-
Lars-Peter Clausen authored
sysfs_emit() is preferred over raw s*printf() for sysfs attributes since it knows about the sysfs buffer specifics and has some built-in checks for size and alignment. Use sysfs_emit() to format the custom device attributes of the ad9523 driver. Signed-off-by:
-
Lars-Peter Clausen authored
sysfs_emit() is preferred over raw s*printf() for sysfs attributes since it knows about the sysfs buffer specifics and has some built-in checks for size and alignment. Use sysfs_emit() to format the custom `ac_excitation` and `bridge_swtich` attributes of the ad7192 driver. Signed-off-by:
-
Lars-Peter Clausen authored
sysfs_emit() is preferred over raw s*printf() for sysfs attributes since it knows about the sysfs buffer specifics and has some built-in checks for size and alignment. Use sysfs_emit() for the `length_align_bytes` buffer attribute. Signed-off-by:
-
Lars-Peter Clausen authored
sysfs_emit() is preferred over raw s*printf() for sysfs attributes since it knows about the sysfs buffer specifics and has some built-in checks for size and alignment. This patch converts the places in the IIO core that follow the pattern of return s*printf(...) to return sysfs_emit(...) This covers the new places that have been introduced where sprintf() is used for formatting sysfs output since the last time this was done in commit 83ca56b6 ("iio: core: Use sysfs_emit() (trivial bits)"). Signed-off-by:
-
Oleksij Rempel authored
Initially this was designed to: | Fix sleeping in atomic context warning and a deadlock after iio_trigger_poll() | call | | If iio_trigger_poll() is called after IRQ was disabled, we will call | reenable_trigger() directly from hard IRQ or hrtimer context instead of | IRQ thread. In this case we will run in to multiple issue as sleeping in atomic | context and a deadlock. | | To avoid this issue, rework the trigger to use state machine. All state | changes are done over the hrtimer, so it allows us to drop fsleep() and | avoid the deadlock. Since this issue was fixed by: 9020ef65 ("iio: trigger: Fix a scheduling whilst atomic issue seen on tsc2046"). This patch is a cleanup to make state machine easier to follow. Signed-off-by:
Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/20220111130402.3404769-1-o.rempel@pengutronix.deSigned-off-by:
-
Antoniu Miclaus authored
Add myself as maintainer for the ADRF6780 driver. Signed-off-by:
-
Antoniu Miclaus authored
The forum link for the Analog Devices linux drivers has changed. Fix the links to redirect to the correct forum subsection. Signed-off-by:
-
Miquel Raynal authored
This is an internal variable, which should be accessed in a very sporadic way and in no case changed by any device driver. Signed-off-by:
Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by:
Alexandru Ardelean <ardeleanalex@gmail.com> Link: https://lore.kernel.org/r/20211215151344.163036-2-miquel.raynal@bootlin.comSigned-off-by:
-
Guodong Liu authored
This commit adds mt8186 compatible node. Signed-off-by:
Guodong Liu <guodong.liu@mediatek.com> Acked-by:
AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20220110084841.575-2-guodong.liu@mediatek.comSigned-off-by:
-
Guodong Liu authored
This commit adds dt-binding documentation of auxadc for Mediatek MT8186 SoC Platform. Signed-off-by:
-
Nikita Yushchenko authored
This patch makes I2C and SPI interface drivers for STMicroelectronics sensor chips individually selectable via Kconfig. The default is kept unchanged - I2C and SPI interface drivers are still selected by default if the corresponding bus support is available. However, the patch makes it possible to explicitly disable drivers that are not needed for a particular target. Signed-off-by:
Nikita Yushchenko <nikita.yoush@cogentembedded.com> Acked-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220110152432.3799227-1-nikita.yoush@cogentembedded.comSigned-off-by:
-
Lad Prabhakar authored
Fix typo RZG2L_ADSMP_DEFUALT_SAMPLING -> RZG2L_ADSMP_DEFAULT_SAMPLING. Reported-by:
Pavel Machek <pavel@denx.de> Signed-off-by:
Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by:
-
Rob Herring authored
Best practice for multi-cell property values is to bracket each multi-cell value. Signed-off-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220106182518.1435497-3-robh@kernel.orgSigned-off-by:
-
Jonathan Cameron authored
Previously inconsistent with a space after { but not before }. Tidy that up to avoid providing a bad example that might get copied into other drivers. Signed-off-by:Gwendal Grignou <gwendal@chromium.org> Link: https://lore.kernel.org/r/20211230174911.78291-17-jic23@kernel.org
-
Jonathan Cameron authored
Previously inconsistent with a space after { but not before }. Tidy that up to avoid providing a bad example that might get copied into other drivers. Signed-off-by: -
Jonathan Cameron authored
The final entry was missing a space. Tidy that up. Signed-off-by:
-
Jonathan Cameron authored
Previously inconsistent with a space after { but not before }. Tidy that up to avoid providing an example to copy into new drivers. Signed-off-by: -
Jonathan Cameron authored
Previously inconsistent with space after { but not before }. Tidy that up to avoid providing a bad example to copy into new drivers. Signed-off-by: -
Jonathan Cameron authored
Previously inconsistent with space after { and not before }. Tidy that up to avoid providing a bad example to copy into new drivers. Signed-off-by: -
Jonathan Cameron authored
The spacing was inconsistent with a space after the { but not before the }. Tidy this up to avoid providing a bad example to copy into new drivers. Signed-off-by: -
Jonathan Cameron authored
The spacing in this driver was inconsistent with a space after the { but not before the }. Tidy this up to avoid providing a bad example to copy into new drivers. Signed-off-by: -
Jonathan Cameron authored
The spacing in this driver was inconsistent with a space after the { but not before the }. Tidy this up to avoid providing a bad example to copy into new drivers. Signed-off-by: -
Jonathan Cameron authored
The spacing in this driver was inconsistent with a space after the { but not before the }. Tidy this up to avoid providing a bad example to copy into new drivers. Signed-off-by: -
Jonathan Cameron authored
The spacing in this driver was inconsistent so make sure we have a space after { and before } for the two id tables. Avoid providing examples of this inconsistency that get copied into new drivers. Signed-off-by: -
Jonathan Cameron authored
The spacing in this driver was inconsistent so make sure we have a space after { and before } for the two id tables. Part of aim is to avoid providing examples of this inconsistency that get copied into new drivers. Signed-off-by: -
Jonathan Cameron authored
The spacing in this driver was inconsistent so make sure we have a space after { and before } for the two id tables. Signed-off-by: -
Jonathan Cameron authored
Having a space after the { and not one before the } is inconsistent and I'd rather not have examples of this that get copied into new drivers. Signed-off-by: -
Jonathan Cameron authored
One case in here was inconsistent and was main focus of this patch. In that case there was a space after the { and none before the }. The second case was then inconsistent in having now spaces. Change makes sure there are spaces. Signed-off-by: -
Jonathan Cameron authored
Having a space after the { and not one before the } is inconsistent and good to remove examples that might get copied into new drivers. Signed-off-by:
-
