Pull xfs fixes from Chandan Babu:

 - Allow stripe unit/width value passed via mount option to be written
   over existing values in the super block

 - Do not set current->journal_info to avoid its value from being miused
   by another filesystem context

* tag 'xfs-6.9-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: don't use current->journal_info
  xfs: allow sunit mount option to repair bad primary sb stripe values

Pull SCSI fixes and updates from James Bottomley:
 "Fully half this pull is updates to lpfc and qla2xxx which got
  committed just as the merge window opened. A sizeable fraction of the
  driver updates are simple bug fixes (and lock reworks for bug fixes in
  the case of lpfc), so rather than splitting the few actual
  enhancements out, we're just adding the drivers to the -rc1 pull.

  The enhancements for lpfc are log message removals, copyright updates
  and three patches redefining types. For qla2xxx it's just removing a
  debug message on module removal and the manufacturer detail update.

  The two major fixes are the sg teardown race and a core error leg
  problem with the procfs directory not being removed if we destroy a
  created host that never got to the running state. The rest are minor
  fixes and constifications"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (41 commits)
  scsi: bnx2fc: Remove spin_lock_bh while releasing resources after upload
  scsi: core: Fix unremoved procfs host directory regression
  scsi: mpi3mr: Avoid memcpy field-spanning write WARNING
  scsi: sd: Fix TCG OPAL unlock on system resume
  scsi: sg: Avoid sg device teardown race
  scsi: lpfc: Copyright updates for 14.4.0.1 patches
  scsi: lpfc: Update lpfc version to 14.4.0.1
  scsi: lpfc: Define types in a union for generic void *context3 ptr
  scsi: lpfc: Define lpfc_dmabuf type for ctx_buf ptr
  scsi: lpfc: Define lpfc_nodelist type for ctx_ndlp ptr
  scsi: lpfc: Use a dedicated lock for ras_fwlog state
  scsi: lpfc: Release hbalock before calling lpfc_worker_wake_up()
  scsi: lpfc: Replace hbalock with ndlp lock in lpfc_nvme_unregister_port()
  scsi: lpfc: Update lpfc_ramp_down_queue_handler() logic
  scsi: lpfc: Remove IRQF_ONESHOT flag from threaded IRQ handling
  scsi: lpfc: Move NPIV's transport unregistration to after resource clean up
  scsi: lpfc: Remove unnecessary log message in queuecommand path
  scsi: qla2xxx: Update version to 10.02.09.200-k
  scsi: qla2xxx: Delay I/O Abort on PCI error
  scsi: qla2xxx: Change debug message during driver unload
  ...

Pull i2c fix from Wolfram Sang:
 "A fix from Andi for I2C host drivers"

* tag 'i2c-for-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: i801: Fix a refactoring that broke a touchpad on Lenovo P1

Pull USB fixes from Greg KH:
 "Here are a bunch of small USB fixes for reported problems and
  regressions for 6.9-rc2. Included in here are:

   - deadlock fixes for long-suffering issues

   - USB phy driver revert for reported problem

   - typec fixes for reported problems

   - duplicate id in dwc3 dropped

   - dwc2 driver fixes

   - udc driver warning fix

   - cdc-wdm race bugfix

   - other tiny USB bugfixes

  All of these have been in linux-next this past week with no reported
  issues"

* tag 'usb-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (26 commits)
  USB: core: Fix deadlock in port "disable" sysfs attribute
  USB: core: Add hub_get() and hub_put() routines
  usb: typec: ucsi: Check capabilities before cable and identity discovery
  usb: typec: ucsi: Clear UCSI_CCI_RESET_COMPLETE before reset
  usb: typec: ucsi_acpi: Refactor and fix DELL quirk
  usb: typec: ucsi: Ack unsupported commands
  usb: typec: ucsi: Check for notifications after init
  usb: typec: ucsi: Clear EVENT_PENDING under PPM lock
  usb: typec: Return size of buffer if pd_set operation succeeds
  usb: udc: remove warning when queue disabled ep
  usb: dwc3: pci: Drop duplicate ID
  usb: dwc3: Properly set system wakeup
  Revert "usb: phy: generic: Get the vbus supply"
  usb: cdc-wdm: close race between read and workqueue
  usb: dwc2: gadget: LPM flow fix
  usb: dwc2: gadget: Fix exiting from clock gating
  usb: dwc2: host: Fix ISOC flow in DDMA mode
  usb: dwc2: host: Fix remote wakeup from hibernation
  usb: dwc2: host: Fix hibernation flow
  USB: core: Fix deadlock in usb_deauthorize_interface()
  ...

Pull staging driver fixes from Greg KH:
 "Here are two small staging driver fixes for the vc04_services driver
  that resolve reported problems:

   - strncpy fix for information leak

   - another information leak discovered by the previous strncpy fix

  Both of these have been in linux-next all this past week with no
  reported issues"

* tag 'staging-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: vc04_services: fix information leak in create_component()
  staging: vc04_services: changen strncpy() to strscpy_pad()

Merge tag 'i2c-host-fixes-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current

One fix in the i801 driver where a bug caused touchpad
malfunctions on some Lenovo P1 models by incorrectly overwriting
a status variable during successful SMBUS transactions.

Pull drm fixes from Dave Airlie:
 "Regular fixes for rc2, quite a few i915/amdgpu as usual, some xe, and
  then mostly scattered around. rc3 might be quieter with the holidays
  but we shall see.

  bridge:
   - select DRM_KMS_HELPER

  dma-buf:
   - fix NULL-pointer deref

  dp:
   - fix div-by-zero in DP MST unplug code

  fbdev:
   - select FB_IOMEM_FOPS for SBus

  sched:
   - fix NULL-pointer deref

  xe:
   - Fix build on mips
   - Fix wrong bound checks
   - Fix use of msec rather than jiffies
   - Remove dead code

  amdgpu:
   - SMU 14.0.1 updates
   - DCN 3.5.x updates
   - VPE fix
   - eDP panel flickering fix
   - Suspend fix
   - PSR fix
   - DCN 3.0+ fix
   - VCN 4.0.6 updates
   - debugfs fix

  amdkfd:
   - DMA-Buf fix
   - GFX 9.4.2 TLB flush fix
   - CP interrupt fix

  i915:
   - Fix for BUG_ON/BUILD_BUG_ON IN I915_memcpy.c
   - Update a MTL workaround
   - Fix locking inversion in hwmon's sysfs
   - Remove a bogus error message around PXP
   - Fix UAF on VMA
   - Reset queue_priority_hint on parking
   - Display Fixes:
   - Remove duplicated audio enable/disable on SDVO and DP
   - Disable AuxCCS for Xe driver
   - Revert init order of MIPI DSI
   - DRRS debugfs fix with an extra refactor patch
   - VRR related fixes
   - Fix a JSL eDP corruption
   - Fix the cursor physical dma address
   - BIOS VBT related fix

  nouveau:
   - dmem: handle kcalloc() allocation failures

  qxl:
   - remove unused variables

  rockchip:
   - vop2: remove support for AR30 and AB30 formats

  vmwgfx:
   - debugfs: create ttm_resource_manager entry only if needed"

* tag 'drm-fixes-2024-03-30' of https://gitlab.freedesktop.org/drm/kernel: (55 commits)
  drm/i915/bios: Tolerate devdata==NULL in intel_bios_encoder_supports_dp_dual_mode()
  drm/i915: Pre-populate the cursor physical dma address
  drm/i915/gt: Reset queue_priority_hint on parking
  drm/i915/vma: Fix UAF on destroy against retire race
  drm/i915: Do not print 'pxp init failed with 0' when it succeed
  drm/i915: Do not match JSL in ehl_combo_pll_div_frac_wa_needed()
  drm/i915/hwmon: Fix locking inversion in sysfs getter
  drm/i915/dsb: Fix DSB vblank waits when using VRR
  drm/i915/vrr: Generate VRR "safe window" for DSB
  drm/i915/display/debugfs: Fix duplicate checks in i915_drrs_status
  drm/i915/drrs: Refactor CPU transcoder DRRS check
  drm/i915/mtl: Update workaround 14018575942
  drm/i915/dsi: Go back to the previous INIT_OTP/DISPLAY_ON order, mostly
  drm/i915/display: Disable AuxCCS framebuffers if built for Xe
  drm/i915: Stop doing double audio enable/disable on SDVO and g4x+ DP
  drm/i915: Add includes for BUG_ON/BUILD_BUG_ON in i915_memcpy.c
  drm/qxl: remove unused variable from `qxl_process_single_command()`
  drm/qxl: remove unused `count` variable from `qxl_surface_id_alloc()`
  drm/i915: add bug.h include to i915_memcpy.c
  drm/vmwgfx: Create debugfs ttm_resource_manager entry only if needed
  ...

Merge tag 'linux_kselftest-fixes-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kselftest fixes from Shuah Khan:
 "Fixes to seccomp and ftrace tests and a change to add config file for
  dmabuf-heap test to increase coverage"

* tag 'linux_kselftest-fixes-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests: dmabuf-heap: add config file for the test
  selftests/seccomp: Try to fit runtime of benchmark into timeout
  selftests/ftrace: Fix event filter target_func selection

Merge tag 'linux_kselftest-kunit-fixes-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull KUnit fixes from Shuah Khan:
 "One urgent fix for --alltests build failure related to renaming of
  CONFIG_DAMON_DBGFS to DAMON_DBGFS_DEPRECATED to the missing config
  option"

* tag 'linux_kselftest-kunit-fixes-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  kunit: configs: Enable CONFIG_DAMON_DBGFS_DEPRECATED for --alltests

The config fragment enlists all the config options needed for the test.
This config is merged into the kernel's config on which this test is
run.

Fixed whitespace errors during commit:
Shuah Khan <skhan@linuxfoundation.org>
Reviewed-by: T.J. Mercier <tjmercier@google.com>
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

The seccomp benchmark runs five scenarios, one calibration run with no
seccomp filters enabled then four further runs each adding a filter. The
calibration run times itself for 15s and then each additional run executes
for the same number of times.

Currently the seccomp tests, including the benchmark, run with an extended
120s timeout but this is not sufficient to robustly run the tests on a lot
of platforms. Sample timings from some recent runs:

   Platform          Run 1  Run 2  Run 3  Run 4
   ---------         -----  -----  -----  -----
   PowerEdge R200    16.6s  16.6s  31.6s  37.4s
   BBB (arm)         20.4s  20.4s  54.5s
   Synquacer (arm64) 20.7s  23.7s  40.3s

The x86 runs from the PowerEdge are quite marginal and routinely fail, for
the successful run reported here the timed portions of the run are at
117.2s leaving less than 3s of margin which is frequently breached. The
added overhead of adding filters on the other platforms is such that there
is no prospect of their runs fitting into the 120s timeout, especially
on 32 bit arm where there is no BPF JIT.

While we could lower the time we calibrate for I'm also already seeing the
currently completing runs reporting issues with the per filter overheads
not matching expectations:

Let's instead raise the timeout to 180s which is only a 50% increase on the
current timeout which is itself not *too* large given that there's only two
tests in this suite.
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

The event filter function test has been failing in our internal test
farm:

| # not ok 33 event filter function - test event filtering on functions

Running the test in verbose mode indicates that this is because the test
erroneously determines that kmem_cache_free() is the most common caller
of kmem_cache_free():

  # # + cut -d: -f3 trace
  # # + sed s/call_site=([^+]*)+0x.*/1/
  # # + sort
  # # + uniq -c
  # # + sort
  # # + tail -n 1
  # # + sed s/^[ 0-9]*//
  # # + target_func=kmem_cache_free

... and as kmem_cache_free() doesn't call itself, setting this as the
filter function for kmem_cache_free() results in no hits, and
consequently the test fails:

  # # + grep kmem_cache_free trace
  # # + grep kmem_cache_free
  # # + wc -l
  # # + hitcnt=0
  # # + grep kmem_cache_free trace
  # # + grep -v kmem_cache_free
  # # + wc -l
  # # + misscnt=0
  # # + [ 0 -eq 0 ]
  # # + exit_fail

This seems to be because the system in question has tasks with ':' in
their name (which a number of kernel worker threads have). These show up
in the trace, e.g.

  test:.sh-1299    [004] .....  2886.040608: kmem_cache_free: call_site=putname+0xa4/0xc8 ptr=000000000f4d22f4 name=names_cache

... and so when we try to extact the call_site with:

  cut -d: -f3 trace | sed 's/call_site=\([^+]*\)+0x.*/\1/'

... the 'cut' command will extrace the column containing
'kmem_cache_free' rather than the column containing 'call_site=...', and
the 'sed' command will leave this unchanged. Consequently, the test will
decide to use 'kmem_cache_free' as the filter function, resulting in the
failure seen above.

Fix this by matching the 'call_site=<func>' part specifically to extract
the function name.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reported-by: Aishwarya TCV <aishwarya.tcv@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: linux-kernel@vger.kernel.org
Cc: linux-kselftest@vger.kernel.org
Cc: linux-trace-kernel@vger.kernel.org
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

Merge tag 'drm-intel-fixes-2024-03-28' of https://anongit.freedesktop.org/git/drm/drm-intel into drm-fixes

Core/GT Fixes:
- Fix for BUG_ON/BUILD_BUG_ON IN I915_memcpy.c (Joonas)
- Update a MTL workaround (Tejas)
- Fix locking inversion in hwmon's sysfs (Janusz)
- Remove a bogus error message around PXP (Jose)
- Fix UAF on VMA (Janusz)
- Reset queue_priority_hint on parking (Chris)

Display Fixes:
- Remove duplicated audio enable/disable on SDVO and DP (Ville)
- Disable AuxCCS for Xe driver (Juha-Pekka)
- Revert init order of MIPI DSI (Ville)
- DRRS debugfs fix with an extra refactor patch (Bhanuprakash)
- VRR related fixes (Ville)
- Fix a JSL eDP corruption (Jonathon)
- Fix the cursor physical dma address (Ville)
- BIOS VBT related fix (Ville)
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZgYaIVgjIs30mIvS@intel.com

The original version of the mitigation would patch in the calls to the
untraining routines directly.  That is, the alternative() in UNTRAIN_RET
will patch in the CALL to srso_alias_untrain_ret() directly.

However, even if commit e7c25c44 ("x86/cpu: Cleanup the untrain
mess") meant well in trying to clean up the situation, due to micro-
architectural reasons, the untraining routine srso_alias_untrain_ret()
must be the target of a CALL instruction and not of a JMP instruction as
it is done now.

Reshuffle the alternative macros to accomplish that.

Fixes: e7c25c44 ("x86/cpu: Cleanup the untrain mess")
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull smb client fixes from Steve French:

 - Add missing trace point (noticed when debugging the recent mknod LSM
   regression)

 - fscache fix

* tag '6.9-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: Fix duplicate fscache cookie warnings
  smb3: add trace event for mknod

Pull thermal control fixes from Rafael Wysocki:
 "These revert a problematic optimization commit and address a devfreq
  cooling device issue.

  Specifics:

   - Revert thermal core optimization that introduced a functional issue
     causing a critical trip point to be crossed in some cases (Daniel
     Lezcano)

   - Add missing conversion between different state ranges to the
     devfreq cooling device driver (Ye Zhang)"

* tag 'thermal-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  thermal: devfreq_cooling: Fix perf state when calculate dfc res_util
  Revert "thermal: core: Don't update trip points inside the hysteresis range"

Pull ACPI fixes from Rafael Wysocki:
 "These fix two issues that may lead to attempts to use memory that has
  been freed already.

  Specifics:

   - Drop __exit annotation from einj_remove() in the ACPI APEI code
     because this function can be called during runtime (Arnd Bergmann)

   - Make acpi_db_walk_for_fields() check acpi_evaluate_object() return
     value to avoid accessing memory that has been freed (Nikita
     Kiryushin)"

* tag 'acpi-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPICA: debugger: check status of acpi_evaluate_object() in acpi_db_walk_for_fields()
  ACPI: APEI: EINJ: mark remove callback as non-__exit

The code wasn't exactly wrong, but it was very odd, and it used
FOLL_FORCE together with FOLL_WRITE when it really didn't need to (it
only set FOLL_WRITE for writable mappings, so then the FOLL_FORCE was
pointless).

It also pointlessly called __get_user_pages() even when it knew it
wouldn't populate anything because the vma wasn't accessible and it
explicitly tested for and did *not* set FOLL_FORCE for inaccessible
vma's.

This code does need to use FOLL_FORCE, because we want to do fault in
writable shared mappings, but then the mapping may not actually be
readable.  And we don't want to use FOLL_WRITE (which would match the
permission of the vma), because that would also dirty the pages, which
we don't want to do.

For very similar reasons, FOLL_FORCE populates a executable-only mapping
with no read permissions. We don't have a FOLL_EXEC flag.

Yes, it would probably be cleaner to split FOLL_WRITE into two bits (for
separate permission and dirty bit handling), and add a FOLL_EXEC flag
for the "GUP executable page" case.  That would allow us to avoid
FOLL_FORCE entirely here.

But that's not how our FOLL_xyz bits have traditionally worked, and that
would be a much bigger patch.

So this at least avoids the FOLL_FORCE | FOLL_WRITE combination that
made one of my experimental validation patches trigger a warning.  That
warning was a false positive (and my experimental patch was incomplete
anyway), but it all made me look at this and decide to clean at least
this small case up.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* acpica:
  ACPICA: debugger: check status of acpi_evaluate_object() in acpi_db_walk_for_fields()

Pull EFI fixes from Ard Biesheuvel:
 "These address all the outstanding EFI/x86 boot related regressions:

   - Revert to the old initrd memory allocation soft limit of INT_MAX,
     which was dropped inadvertently

   - Ensure that startup_32() is entered with a valid boot_params
     pointer when using the new EFI mixed mode protocol

   - Fix a compiler warning introduced by a fix from the previous pull"

* tag 'efi-fixes-for-v6.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
  x86/efistub: Reinstate soft limit for initrd loading
  efi/libstub: Cast away type warning in use of max()
  x86/efistub: Add missing boot_params for mixed mode compat entry

Pull block fixes from Jens Axboe:
 "Small round of minor fixes or cleanups for the 6.9-rc2 kernel, one
  fixing an issue introduced in 6.8"

* tag 'block-6.9-20240329' of git://git.kernel.dk/linux:
  block: Do not force full zone append completion in req_bio_endio()
  block: don't reject too large max_user_sectors in blk_validate_limits
  block: Make blk_rq_set_mixed_merge() static

Merge tag 'for-6.9/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device mapper fixes from Mike Snitzer:

 - Fix MAINTAINERS to not include M: dm-devel for DM entries.

 - Fix DM vdo's murmurhash to use proper byteswapping methods.

 - Fix DM integrity clang warning about comparison out-of-range.

* tag 'for-6.9/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm integrity: fix out-of-range warning
  dm vdo murmurhash3: use kernel byteswapping routines instead of GCC ones
  MAINTAINERS: Remove incorrect M: tag for dm-devel@lists.linux.dev

Pull gpio fixes from Bartosz Golaszewski:

 - fix a procfs failure when requesting an interrupt with a label
   containing the '/' character

 - add missing stubs for GPIO lookup functions for !GPIOLIB

 - fix debug messages that would print "(null)" for NULL strings

* tag 'gpio-fixes-for-v6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpiolib: Fix debug messaging in gpiod_find_and_request()
  gpiolib: Add stubs for GPIO lookup functions
  gpio: cdev: sanitize the label before requesting the interrupt

Depending on the value of CONFIG_HZ, clang complains about a pointless
comparison:

drivers/md/dm-integrity.c:4085:12: error: result of comparison of
                        constant 42949672950 with expression of type
                        'unsigned int' is always false
                        [-Werror,-Wtautological-constant-out-of-range-compare]
                        if (val >= (uint64_t)UINT_MAX * 1000 / HZ) {

As the check remains useful for other configurations, shut up the
warning by adding a second type cast to uint64_t.

Fixes: 468dfca3 ("dm integrity: add a bitmap mode")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Mikulas Patocka <mpatocka@redhat.com>
Reviewed-by: Justin Stitt <justinstitt@google.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>

Also open-code the calls.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Ken Raeburn <raeburn@redhat.com>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>

The dm-devel@lists.linux.dev mailing list should only be listed under
the L: (List) tag in the MAINTAINERS file. However, it was incorrectly
listed under both L: and M: (Maintainers) tags, which is not accurate.
Remove the M: tag for dm-devel@lists.linux.dev in the MAINTAINERS file
to reflect the correct categorization.
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>

Pull MMC fixes from Ulf Hansson:
 "MMC core:
   - Fix regression for the mmc ioctl

  MMC host:
   - sdhci-of-dwcmshc: Fixup PM support in ->remove_new()
   - sdhci-omap: Re-tune when device became runtime suspended"

* tag 'mmc-v6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  sdhci-of-dwcmshc: disable PM runtime in dwcmshc_remove()
  mmc: sdhci-omap: re-tuning is needed after a pm transition to support emmc HS200 mode
  mmc: core: Avoid negative index with array access
  mmc: core: Initialize mmc_blk_ioc_data

This reverts commit 748dc0b6.

Partial zone append completions cannot be supported as there is no
guarantees that the fragmented data will be written sequentially in the
same manner as with a full command. Commit 748dc0b6 ("block: fix
partial zone append completion handling in req_bio_endio()") changed
req_bio_endio() to always advance a partially failed BIO by its full
length, but this can lead to incorrect accounting. So revert this
change and let low level device drivers handle this case by always
failing completely zone append operations. With this revert, users will
still see an IO error for a partially completed zone append BIO.

Fixes: 748dc0b6 ("block: fix partial zone append completion handling in req_bio_endio()")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240328004409.594888-2-dlemoal@kernel.orgSigned-off-by: Jens Axboe <axboe@kernel.dk>

Pull sound fixes from Takashi Iwai:
 "A collection of device-specific small fixes: a series of fixes for
  TAS2781 HD-audio codec, ASoC SOF, Cirrus CS35L56 and a couple of
  legacy drivers"

* tag 'sound-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda/tas2781: remove useless dev_dbg from playback_hook
  ALSA: hda/tas2781: add debug statements to kcontrols
  ALSA: hda/tas2781: add locks to kcontrols
  ALSA: hda/tas2781: remove digital gain kcontrol
  ALSA: aoa: avoid false-positive format truncation warning
  ALSA: sh: aica: reorder cleanup operations to avoid UAF bugs
  ALSA: hda: cs35l56: Set the init_done flag before component_add()
  ALSA: hda: cs35l56: Raise device name message log level
  ASoC: SOF: ipc4-topology: support NHLT device type
  ALSA: hda: intel-nhlt: add intel_nhlt_ssp_device_type() function

Pull iommu fixes from Joerg Roedel:
 "ARM SMMU fixes:

   - Fix swabbing of the STE fields in the unlikely event of running on
     a big-endian machine

   - Fix setting of STE.SHCFG on hardware that doesn't implement support
     for attribute overrides

  IOMMU core:

   - PASID validation fix in device attach path"

* tag 'iommu-fixes-v6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu: Validate the PASID in iommu_attach_device_pasid()
  iommu/arm-smmu-v3: Fix access for STE.SHCFG
  iommu/arm-smmu-v3: Add cpu_to_le64() around STRTAB_STE_0_V

Pull nfsd fixes from Chuck Lever:

 - Address three recently introduced regressions

* tag 'nfsd-6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
  NFSD: CREATE_SESSION must never cache NFS4ERR_DELAY replies
  SUNRPC: Revert 561141dd
  nfsd: Fix error cleanup path in nfsd_rename()

Pull networking fixes from Paolo Abeni:
 "Including fixes from bpf, WiFi and netfilter.

  Current release - regressions:

   - ipv6: fix address dump when IPv6 is disabled on an interface

  Current release - new code bugs:

   - bpf: temporarily disable atomic operations in BPF arena

   - nexthop: fix uninitialized variable in nla_put_nh_group_stats()

  Previous releases - regressions:

   - bpf: protect against int overflow for stack access size

   - hsr: fix the promiscuous mode in offload mode

   - wifi: don't always use FW dump trig

   - tls: adjust recv return with async crypto and failed copy to
     userspace

   - tcp: properly terminate timers for kernel sockets

   - ice: fix memory corruption bug with suspend and rebuild

   - at803x: fix kernel panic with at8031_probe

   - qeth: handle deferred cc1

  Previous releases - always broken:

   - bpf: fix bug in BPF_LDX_MEMSX

   - netfilter: reject table flag and netdev basechain updates

   - inet_defrag: prevent sk release while still in use

   - wifi: pick the version of SESSION_PROTECTION_NOTIF

   - wwan: t7xx: split 64bit accesses to fix alignment issues

   - mlxbf_gige: call request_irq() after NAPI initialized

   - hns3: fix kernel crash when devlink reload during pf
     initialization"

* tag 'net-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (81 commits)
  inet: inet_defrag: prevent sk release while still in use
  Octeontx2-af: fix pause frame configuration in GMP mode
  net: lan743x: Add set RFE read fifo threshold for PCI1x1x chips
  net: bcmasp: Remove phy_{suspend/resume}
  net: bcmasp: Bring up unimac after PHY link up
  net: phy: qcom: at803x: fix kernel panic with at8031_probe
  netfilter: arptables: Select NETFILTER_FAMILY_ARP when building arp_tables.c
  netfilter: nf_tables: skip netdev hook unregistration if table is dormant
  netfilter: nf_tables: reject table flag and netdev basechain updates
  netfilter: nf_tables: reject destroy command to remove basechain hooks
  bpf: update BPF LSM designated reviewer list
  bpf: Protect against int overflow for stack access size
  bpf: Check bloom filter map value size
  bpf: fix warning for crash_kexec
  selftests: netdevsim: set test timeout to 10 minutes
  net: wan: framer: Add missing static inline qualifiers
  mlxbf_gige: call request_irq() after NAPI initialized
  tls: get psock ref after taking rxlock to avoid leak
  selftests: tls: add test with a partially invalid iov
  tls: adjust recv return with async crypto and failed copy to userspace
  ...

Merge tag 'drm-misc-fixes-2024-03-28' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes

Short summary of fixes pull:

bridge:
- select DRM_KMS_HELPER

dma-buf:
- fix NULL-pointer deref

dp:
- fix div-by-zero in DP MST unplug code

fbdev:
- select FB_IOMEM_FOPS for SBus

nouveau:
- dmem: handle kcalloc() allocation failures

qxl:
- remove unused variables

rockchip:
- vop2: remove support for AR30 and AB30 formats

sched:
- fix NULL-pointer deref

vmwgfx:
- debugfs: create ttm_resource_manager entry only if needed
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240328134417.GA8673@localhost.localdomain

This is required, as CONFIG_DAMON_DEBUGFS is enabled, and --alltests UML
builds will fail due to the missing config option otherwise.

Fixes: f4cba4bf ("mm/damon: rename CONFIG_DAMON_DBGFS to DAMON_DBGFS_DEPRECATED")
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Rae Moar <rmoar@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

If we have no VBT, or the VBT didn't declare the encoder
in question, we won't have the 'devdata' for the encoder.
Instead of oopsing just bail early.

We won't be able to tell whether the port is DP++ or not,
but so be it.

Cc: stable@vger.kernel.org
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/10464Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240319092443.15769-1-ville.syrjala@linux.intel.comReviewed-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit 26410896)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Calling i915_gem_object_get_dma_address() from the vblank
evade critical section triggers might_sleep().

While we know that we've already pinned the framebuffer
and thus i915_gem_object_get_dma_address() will in fact
not sleep in this case, it seems reasonable to keep the
unconditional might_sleep() for maximum coverage.

So let's instead pre-populate the dma address during
fb pinning, which all happens before we enter the
vblank evade critical section.

We can use u32 for the dma address as this class of
hardware doesn't support >32bit addresses.

Cc: stable@vger.kernel.org
Fixes: 0225a909 ("drm/i915: Make cursor plane registers unlocked")
Reported-by: Borislav Petkov <bp@alien8.de>
Closes: https://lore.kernel.org/intel-gfx/20240227100342.GAZd2zfmYcPS_SndtO@fat_crate.local/Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240325175738.3440-1-ville.syrjala@linux.intel.comTested-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
(cherry picked from commit c1289a5c)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Originally, with strict in order execution, we could complete execution
only when the queue was empty. Preempt-to-busy allows replacement of an
active request that may complete before the preemption is processed by
HW. If that happens, the request is retired from the queue, but the
queue_priority_hint remains set, preventing direct submission until
after the next CS interrupt is processed.

This preempt-to-busy race can be triggered by the heartbeat, which will
also act as the power-management barrier and upon completion allow us to
idle the HW. We may process the completion of the heartbeat, and begin
parking the engine before the CS event that restores the
queue_priority_hint, causing us to fail the assertion that it is MIN.

<3>[  166.210729] __engine_park:283 GEM_BUG_ON(engine->sched_engine->queue_priority_hint != (-((int)(~0U >> 1)) - 1))
<0>[  166.210781] Dumping ftrace buffer:
<0>[  166.210795] ---------------------------------
...
<0>[  167.302811] drm_fdin-1097      2..s1. 165741070us : trace_ports: 0000:00:02.0 rcs0: promote { ccid:20 1217:2 prio 0 }
<0>[  167.302861] drm_fdin-1097      2d.s2. 165741072us : execlists_submission_tasklet: 0000:00:02.0 rcs0: preempting last=1217:2, prio=0, hint=2147483646
<0>[  167.302928] drm_fdin-1097      2d.s2. 165741072us : __i915_request_unsubmit: 0000:00:02.0 rcs0: fence 1217:2, current 0
<0>[  167.302992] drm_fdin-1097      2d.s2. 165741073us : __i915_request_submit: 0000:00:02.0 rcs0: fence 3:4660, current 4659
<0>[  167.303044] drm_fdin-1097      2d.s1. 165741076us : execlists_submission_tasklet: 0000:00:02.0 rcs0: context:3 schedule-in, ccid:40
<0>[  167.303095] drm_fdin-1097      2d.s1. 165741077us : trace_ports: 0000:00:02.0 rcs0: submit { ccid:40 3:4660* prio 2147483646 }
<0>[  167.303159] kworker/-89       11..... 165741139us : i915_request_retire.part.0: 0000:00:02.0 rcs0: fence c90:2, current 2
<0>[  167.303208] kworker/-89       11..... 165741148us : __intel_context_do_unpin: 0000:00:02.0 rcs0: context:c90 unpin
<0>[  167.303272] kworker/-89       11..... 165741159us : i915_request_retire.part.0: 0000:00:02.0 rcs0: fence 1217:2, current 2
<0>[  167.303321] kworker/-89       11..... 165741166us : __intel_context_do_unpin: 0000:00:02.0 rcs0: context:1217 unpin
<0>[  167.303384] kworker/-89       11..... 165741170us : i915_request_retire.part.0: 0000:00:02.0 rcs0: fence 3:4660, current 4660
<0>[  167.303434] kworker/-89       11d..1. 165741172us : __intel_context_retire: 0000:00:02.0 rcs0: context:1216 retire runtime: { total:56028ns, avg:56028ns }
<0>[  167.303484] kworker/-89       11..... 165741198us : __engine_park: 0000:00:02.0 rcs0: parked
<0>[  167.303534]   <idle>-0         5d.H3. 165741207us : execlists_irq_handler: 0000:00:02.0 rcs0: semaphore yield: 00000040
<0>[  167.303583] kworker/-89       11..... 165741397us : __intel_context_retire: 0000:00:02.0 rcs0: context:1217 retire runtime: { total:325575ns, avg:0ns }
<0>[  167.303756] kworker/-89       11..... 165741777us : __intel_context_retire: 0000:00:02.0 rcs0: context:c90 retire runtime: { total:0ns, avg:0ns }
<0>[  167.303806] kworker/-89       11..... 165742017us : __engine_park: __engine_park:283 GEM_BUG_ON(engine->sched_engine->queue_priority_hint != (-((int)(~0U >> 1)) - 1))
<0>[  167.303811] ---------------------------------
<4>[  167.304722] ------------[ cut here ]------------
<2>[  167.304725] kernel BUG at drivers/gpu/drm/i915/gt/intel_engine_pm.c:283!
<4>[  167.304731] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
<4>[  167.304734] CPU: 11 PID: 89 Comm: kworker/11:1 Tainted: G        W          6.8.0-rc2-CI_DRM_14193-gc655e0fd2804+ #1
<4>[  167.304736] Hardware name: Intel Corporation Rocket Lake Client Platform/RocketLake S UDIMM 6L RVP, BIOS RKLSFWI1.R00.3173.A03.2204210138 04/21/2022
<4>[  167.304738] Workqueue: i915-unordered retire_work_handler [i915]
<4>[  167.304839] RIP: 0010:__engine_park+0x3fd/0x680 [i915]
<4>[  167.304937] Code: 00 48 c7 c2 b0 e5 86 a0 48 8d 3d 00 00 00 00 e8 79 48 d4 e0 bf 01 00 00 00 e8 ef 0a d4 e0 31 f6 bf 09 00 00 00 e8 03 49 c0 e0 <0f> 0b 0f 0b be 01 00 00 00 e8 f5 61 fd ff 31 c0 e9 34 fd ff ff 48
<4>[  167.304940] RSP: 0018:ffffc9000059fce0 EFLAGS: 00010246
<4>[  167.304942] RAX: 0000000000000200 RBX: 0000000000000000 RCX: 0000000000000006
<4>[  167.304944] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000009
<4>[  167.304946] RBP: ffff8881330ca1b0 R08: 0000000000000001 R09: 0000000000000001
<4>[  167.304947] R10: 0000000000000001 R11: 0000000000000001 R12: ffff8881330ca000
<4>[  167.304948] R13: ffff888110f02aa0 R14: ffff88812d1d0205 R15: ffff88811277d4f0
<4>[  167.304950] FS:  0000000000000000(0000) GS:ffff88844f780000(0000) knlGS:0000000000000000
<4>[  167.304952] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
<4>[  167.304953] CR2: 00007fc362200c40 CR3: 000000013306e003 CR4: 0000000000770ef0
<4>[  167.304955] PKRU: 55555554
<4>[  167.304957] Call Trace:
<4>[  167.304958]  <TASK>
<4>[  167.305573]  ____intel_wakeref_put_last+0x1d/0x80 [i915]
<4>[  167.305685]  i915_request_retire.part.0+0x34f/0x600 [i915]
<4>[  167.305800]  retire_requests+0x51/0x80 [i915]
<4>[  167.305892]  intel_gt_retire_requests_timeout+0x27f/0x700 [i915]
<4>[  167.305985]  process_scheduled_works+0x2db/0x530
<4>[  167.305990]  worker_thread+0x18c/0x350
<4>[  167.305993]  kthread+0xfe/0x130
<4>[  167.305997]  ret_from_fork+0x2c/0x50
<4>[  167.306001]  ret_from_fork_asm+0x1b/0x30
<4>[  167.306004]  </TASK>

It is necessary for the queue_priority_hint to be lower than the next
request submission upon waking up, as we rely on the hint to decide when
to kick the tasklet to submit that first request.

Fixes: 22b7a426 ("drm/i915/execlists: Preempt-to-busy")
Closes: https://gitlab.freedesktop.org/drm/intel/issues/10154Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: <stable@vger.kernel.org> # v5.4+
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240318135906.716055-2-janusz.krzysztofik@linux.intel.com
(cherry picked from commit 98850e96)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Object debugging tools were sporadically reporting illegal attempts to
free a still active i915 VMA object when parking a GT believed to be idle.

[161.359441] ODEBUG: free active (active state 0) object: ffff88811643b958 object type: i915_active hint: __i915_vma_active+0x0/0x50 [i915]
[161.360082] WARNING: CPU: 5 PID: 276 at lib/debugobjects.c:514 debug_print_object+0x80/0xb0
...
[161.360304] CPU: 5 PID: 276 Comm: kworker/5:2 Not tainted 6.5.0-rc1-CI_DRM_13375-g003f860e5577+ #1
[161.360314] Hardware name: Intel Corporation Rocket Lake Client Platform/RocketLake S UDIMM 6L RVP, BIOS RKLSFWI1.R00.3173.A03.2204210138 04/21/2022
[161.360322] Workqueue: i915-unordered __intel_wakeref_put_work [i915]
[161.360592] RIP: 0010:debug_print_object+0x80/0xb0
...
[161.361347] debug_object_free+0xeb/0x110
[161.361362] i915_active_fini+0x14/0x130 [i915]
[161.361866] release_references+0xfe/0x1f0 [i915]
[161.362543] i915_vma_parked+0x1db/0x380 [i915]
[161.363129] __gt_park+0x121/0x230 [i915]
[161.363515] ____intel_wakeref_put_last+0x1f/0x70 [i915]

That has been tracked down to be happening when another thread is
deactivating the VMA inside __active_retire() helper, after the VMA's
active counter has been already decremented to 0, but before deactivation
of the VMA's object is reported to the object debugging tool.

We could prevent from that race by serializing i915_active_fini() with
__active_retire() via ref->tree_lock, but that wouldn't stop the VMA from
being used, e.g. from __i915_vma_retire() called at the end of
__active_retire(), after that VMA has been already freed by a concurrent
i915_vma_destroy() on return from the i915_active_fini().  Then, we should
rather fix the issue at the VMA level, not in i915_active.

Since __i915_vma_parked() is called from __gt_park() on last put of the
GT's wakeref, the issue could be addressed by holding the GT wakeref long
enough for __active_retire() to complete before that wakeref is released
and the GT parked.

I believe the issue was introduced by commit d9393973 ("drm/i915:
Remove the vma refcount") which moved a call to i915_active_fini() from
a dropped i915_vma_release(), called on last put of the removed VMA kref,
to i915_vma_parked() processing path called on last put of a GT wakeref.
However, its visibility to the object debugging tool was suppressed by a
bug in i915_active that was fixed two weeks later with commit e92eb246
("drm/i915/active: Fix missing debug object activation").

A VMA associated with a request doesn't acquire a GT wakeref by itself.
Instead, it depends on a wakeref held directly by the request's active
intel_context for a GT associated with its VM, and indirectly on that
intel_context's engine wakeref if the engine belongs to the same GT as the
VMA's VM.  Those wakerefs are released asynchronously to VMA deactivation.

Fix the issue by getting a wakeref for the VMA's GT when activating it,
and putting that wakeref only after the VMA is deactivated.  However,
exclude global GTT from that processing path, otherwise the GPU never goes
idle.  Since __i915_vma_retire() may be called from atomic contexts, use
async variant of wakeref put.  Also, to avoid circular locking dependency,
take care of acquiring the wakeref before VM mutex when both are needed.

v7: Add inline comments with justifications for:
    - using untracked variants of intel_gt_pm_get/put() (Nirmoy),
    - using async variant of _put(),
    - not getting the wakeref in case of a global GTT,
    - always getting the first wakeref outside vm->mutex.
v6: Since __i915_vma_active/retire() callbacks are not serialized, storing
    a wakeref tracking handle inside struct i915_vma is not safe, and
    there is no other good place for that.  Use untracked variants of
    intel_gt_pm_get/put_async().
v5: Replace "tile" with "GT" across commit description (Rodrigo),
  - avoid mentioning multi-GT case in commit description (Rodrigo),
  - explain why we need to take a temporary wakeref unconditionally inside
    i915_vma_pin_ww() (Rodrigo).
v4: Refresh on top of commit 5e4e06e4 ("drm/i915: Track gt pm
    wakerefs") (Andi),
  - for more easy backporting, split out removal of former insufficient
    workarounds and move them to separate patches (Nirmoy).
  - clean up commit message and description a bit.
v3: Identify root cause more precisely, and a commit to blame,
  - identify and drop former workarounds,
  - update commit message and description.
v2: Get the wakeref before VM mutex to avoid circular locking dependency,
  - drop questionable Fixes: tag.

Fixes: d9393973 ("drm/i915: Remove the vma refcount")
Closes: https://gitlab.freedesktop.org/drm/intel/issues/8875Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Nirmoy Das <nirmoy.das@intel.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: stable@vger.kernel.org # v5.19+
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240305143747.335367-6-janusz.krzysztofik@linux.intel.com
(cherry picked from commit f3c71b2d)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

It is misleading, if the intention was to also print something
in case it succeed it should have a different string.

Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Fixes: 698e19da ("drm/i915: Skip pxp init if gt is wedged")
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240320210547.71937-1-jose.souza@intel.com
(cherry picked from commit d437099a)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Since commit 0c65dc06 ("drm/i915/jsl: s/JSL/JASPERLAKE for
platform/subplatform defines"), boot freezes on a Jasper Lake tablet
(Librem 11), usually with graphical corruption on the eDP display,
but sometimes just a black screen.  This commit was included in 6.6 and
later.

That commit was intended to refactor EHL and JSL macros, but the change
to ehl_combo_pll_div_frac_wa_needed() started matching JSL incorrectly
when it was only intended to match EHL.

It replaced:
	return ((IS_PLATFORM(i915, INTEL_ELKHARTLAKE) &&
		 IS_JSL_EHL_DISPLAY_STEP(i915, STEP_B0, STEP_FOREVER)) ||
with:
	return (((IS_ELKHARTLAKE(i915) || IS_JASPERLAKE(i915)) &&
		 IS_DISPLAY_STEP(i915, STEP_B0, STEP_FOREVER)) ||

Remove IS_JASPERLAKE() to fix the regression.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Cc: stable@vger.kernel.org
Fixes: 0c65dc06 ("drm/i915/jsl: s/JSL/JASPERLAKE for platform/subplatform defines")
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240313135424.3731410-1-jonathon.hall@puri.smSigned-off-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit 1ef48859)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>