- 26 Sep, 2018 27 commits
-
-
Michael Müller authored
[ Upstream commit 0e7d4d93 ] This patch fixes two typos related to unregistering algorithms supported by SAHARAH 3. In sahara_register_algs the wrong algorithms are unregistered in case of an error. In sahara_unregister_algs the wrong array is used to determine the iteration count. Signed-off-by:
Michael Müller <michael@fds-team.de> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Randy Dunlap authored
[ Upstream commit c2e2a618 ] Fix a build warning in toshiba_acpi.c when CONFIG_PROC_FS is not enabled by marking the unused function as __maybe_unused. ../drivers/platform/x86/toshiba_acpi.c:1685:12: warning: 'version_proc_show' defined but not used [-Wunused-function] Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: Azael Avalos <coproscefalo@gmail.com> Cc: platform-driver-x86@vger.kernel.org Cc: Andy Shevchenko <andy@infradead.org> Signed-off-by:
Darren Hart (VMware) <dvhart@infradead.org> Signed-off-by:
-
Julian Wiedmann authored
[ Upstream commit 70551dc4 ] After the subdriver's remove() routine has completed, the card's layer mode is undetermined again. Reflect this in the layer2 field. If qeth_dev_layer2_store() hits an error after remove() was called, the card _always_ requires a setup(), even if the previous layer mode is requested again. But qeth_dev_layer2_store() bails out early if the requested layer mode still matches the current one. So unless we reset the layer2 field, re-probing the card back to its previous mode is currently not possible. Signed-off-by:
Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Julian Wiedmann authored
[ Upstream commit a702349a ] By updating q->used_buffers only _after_ do_QDIO() has completed, there is a potential race against the buffer's TX completion. In the unlikely case that the TX completion path wins, qeth_qdio_output_handler() would decrement the counter before qeth_flush_buffers() even incremented it. Signed-off-by:
-
Loic Poulain authored
[ Upstream commit e53db018 ] Current LED trigger, 'bt', is not known/used by any existing driver. Fix this by renaming it to 'bluetooth-power' trigger which is controlled by the Bluetooth subsystem. Fixes: 9943230c ("arm64: dts: qcom: Add apq8016-sbc board LED's related device nodes") Signed-off-by:
Loic Poulain <loic.poulain@linaro.org> Signed-off-by:
Andy Gross <andy.gross@linaro.org> Signed-off-by:
-
Vitaly Kuznetsov authored
[ Upstream commit 2d408c0d ] Commit f599c64f ("xen-netfront: Fix race between device setup and open") changed the initialization order: xennet_create_queues() now happens before we do register_netdev() so using netdev->name in xennet_init_queue() is incorrect, we end up with the following in /proc/interrupts: 60: 139 0 xen-dyn -event eth%d-q0-tx 61: 265 0 xen-dyn -event eth%d-q0-rx 62: 234 0 xen-dyn -event eth%d-q1-tx 63: 1 0 xen-dyn -event eth%d-q1-rx and this looks ugly. Actually, using early netdev name (even when it's already set) is also not ideal: nowadays we tend to rename eth devices and queue name may end up not corresponding to the netdev name. Use nodename from xenbus device for queue naming: this can't change in VM's lifetime. Now /proc/interrupts looks like 62: 202 0 xen-dyn -event device/vif/0-q0-tx 63: 317 0 xen-dyn -event device/vif/0-q0-rx 64: 262 0 xen-dyn -event device/vif/0-q1-tx 65: 17 0 xen-dyn -event device/vif/0-q1-rx Fixes: f599c64f ("xen-netfront: Fix race between device setup and open") Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by:
Ross Lagerwall <ross.lagerwall@citrix.com> Signed-off-by:
-
Manikanta Pubbisetty authored
[ Upstream commit 133bf90d ] As explained in ieee80211_delayed_tailroom_dec(), during roam, keys of the old AP will be destroyed and new keys will be installed. Deletion of the old key causes crypto_tx_tailroom_needed_cnt to go from 1 to 0 and the new key installation causes a transition from 0 to 1. Whenever crypto_tx_tailroom_needed_cnt transitions from 0 to 1, we invoke synchronize_net(); the reason for doing this is to avoid a race in the TX path as explained in increment_tailroom_need_count(). This synchronize_net() operation can be slow and can affect the station roam time. To avoid this, decrementing the crypto_tx_tailroom_needed_cnt is delayed for a while so that upon installation of new key the transition would be from 1 to 2 instead of 0 to 1 and thereby improving the roam time. This is all correct for a STA iftype, but deferring the tailroom_needed decrement for other iftypes may be unnecessary. For example, let's consider the case of a 4-addr client connecting to an AP for which AP_VLAN interface is also created, let the initial value for tailroom_needed on the AP be 1. * 4-addr client connects to the AP (AP: tailroom_needed = 1) * AP will clear old keys, delay decrement of tailroom_needed count * AP_VLAN is created, it takes the tailroom count from master (AP_VLAN: tailroom_needed = 1, AP: tailroom_needed = 1) * Install new key for the station, assume key is plumbed in the HW, there won't be any change in tailroom_needed count on AP iface * Delayed decrement of tailroom_needed count on AP (AP: tailroom_needed = 0, AP_VLAN: tailroom_needed = 1) Because of the delayed decrement on AP iface, tailroom_needed count goes out of sync between AP(master iface) and AP_VLAN(slave iface) and there would be unnecessary tailroom created for the packets going through AP_VLAN iface. Also, WARN_ONs were observed while trying to bring down the AP_VLAN interface: (warn_slowpath_common) (warn_slowpath_null+0x18/0x20) (warn_slowpath_null) (ieee80211_free_keys+0x114/0x1e4) (ieee80211_free_keys) (ieee80211_del_virtual_monitor+0x51c/0x850) (ieee80211_del_virtual_monitor) (ieee80211_stop+0x30/0x3c) (ieee80211_stop) (__dev_close_many+0x94/0xb8) (__dev_close_many) (dev_close_many+0x5c/0xc8) Restricting delayed decrement to station interface alone fixes the problem and it makes sense to do so because delayed decrement is done to improve roam time which is applicable only for client devices. Signed-off-by:
Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Paul Cercueil authored
[ Upstream commit c6ea7e97 ] Having the zload address at 0x8060.0000 means the size of the uncompressed kernel cannot be bigger than around 6 MiB, as it is deflated at address 0x8001.0000. This limit is too small; a kernel with some built-in drivers and things like debugfs enabled will already be over 6 MiB in size, and so will fail to extract properly. To fix this, we bump the zload address from 0x8060.0000 to 0x8100.0000. This is fine, as all the boards featuring Ingenic JZ SoCs have at least 32 MiB of RAM, and use u-boot or compatible bootloaders which won't hardcode the load address but read it from the uImage's header. Signed-off-by:
Paul Cercueil <paul@crapouillou.net> Signed-off-by:
Paul Burton <paul.burton@mips.com> Patchwork: https://patchwork.linux-mips.org/patch/19787/ Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Signed-off-by:
-
Nicholas Piggin authored
[ Upstream commit bd90284c ] The intention here is to consume and discard the remaining buffer upon error. This works if there has not been a previous partial write. If there has been, then total_len is no longer total number of bytes to copy. total_len is always "bytes left to copy", so it should be added to written bytes. This code may not be exercised any more if partial writes will not be hit, but this is a small bugfix before a larger change. Reviewed-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
Nicholas Piggin <npiggin@gmail.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Sandipan Das authored
[ Upstream commit c715fcfd ] For powerpc64, redundant entries in the callchain are filtered out by determining the state of the return address and the stack frame using DWARF debug information. For making these filtering decisions we must analyze the debug information for the location corresponding to the program counter value, i.e. the first entry in the callchain, and not the LR value; otherwise, perf may filter out either the second or the third entry in the callchain incorrectly. This can be observed on a powerpc64le system running Fedora 27 as shown below. Case 1 - Attaching a probe at inet_pton+0x8 (binary offset 0x15af28). Return address is still in LR and a new stack frame is not yet allocated. The LR value, i.e. the second entry, should not be filtered out. # objdump -d /usr/lib64/libc-2.26.so | less ... 000000000010eb10 <gaih_inet.constprop.7>: ... 10fa48: 78 bb e4 7e mr r4,r23 10fa4c: 0a 00 60 38 li r3,10 10fa50: d9 b4 04 48 bl 15af28 <inet_pton+0x8> 10fa54: 00 00 00 60 nop 10fa58: ac f4 ff 4b b 10ef04 <gaih_inet.constprop.7+0x3f4> ... 0000000000110450 <getaddrinfo>: ... 1105a8: 54 00 ff 38 addi r7,r31,84 1105ac: 58 00 df 38 addi r6,r31,88 1105b0: 69 e5 ff 4b bl 10eb18 <gaih_inet.constprop.7+0x8> 1105b4: 78 1b 71 7c mr r17,r3 1105b8: 50 01 7f e8 ld r3,336(r31) ... 000000000015af20 <inet_pton>: 15af20: 0b 00 4c 3c addis r2,r12,11 15af24: e0 c1 42 38 addi r2,r2,-15904 15af28: a6 02 08 7c mflr r0 15af2c: f0 ff c1 fb std r30,-16(r1) 15af30: f8 ff e1 fb std r31,-8(r1) ... # perf probe -x /usr/lib64/libc-2.26.so -a inet_pton+0x8 # perf record -e probe_libc:inet_pton -g ping -6 -c 1 ::1 # perf script Before: ping 4507 [002] 514985.546540: probe_libc:inet_pton: (7fffa7dbaf28) 7fffa7dbaf28 __GI___inet_pton+0x8 (/usr/lib64/libc-2.26.so) 7fffa7d705b4 getaddrinfo+0x164 (/usr/lib64/libc-2.26.so) 13fb52d70 _init+0xbfc (/usr/bin/ping) 7fffa7c836a0 generic_start_main.isra.0+0x140 (/usr/lib64/libc-2.26.so) 7fffa7c83898 __libc_start_main+0xb8 (/usr/lib64/libc-2.26.so) 0 [unknown] ([unknown]) After: ping 4507 [002] 514985.546540: probe_libc:inet_pton: (7fffa7dbaf28) 7fffa7dbaf28 __GI___inet_pton+0x8 (/usr/lib64/libc-2.26.so) 7fffa7d6fa54 gaih_inet.constprop.7+0xf44 (/usr/lib64/libc-2.26.so) 7fffa7d705b4 getaddrinfo+0x164 (/usr/lib64/libc-2.26.so) 13fb52d70 _init+0xbfc (/usr/bin/ping) 7fffa7c836a0 generic_start_main.isra.0+0x140 (/usr/lib64/libc-2.26.so) 7fffa7c83898 __libc_start_main+0xb8 (/usr/lib64/libc-2.26.so) 0 [unknown] ([unknown]) Case 2 - Attaching a probe at _int_malloc+0x180 (binary offset 0x9cf10). Return address in still in LR and a new stack frame has already been allocated but not used. The caller's caller, i.e. the third entry, is invalid and should be filtered out and not the second one. # objdump -d /usr/lib64/libc-2.26.so | less ... 000000000009cd90 <_int_malloc>: 9cd90: 17 00 4c 3c addis r2,r12,23 9cd94: 70 a3 42 38 addi r2,r2,-23696 9cd98: 26 00 80 7d mfcr r12 9cd9c: f8 ff e1 fb std r31,-8(r1) 9cda0: 17 00 e4 3b addi r31,r4,23 9cda4: d8 ff 61 fb std r27,-40(r1) 9cda8: 78 23 9b 7c mr r27,r4 9cdac: 1f 00 bf 2b cmpldi cr7,r31,31 9cdb0: f0 ff c1 fb std r30,-16(r1) 9cdb4: b0 ff c1 fa std r22,-80(r1) 9cdb8: 78 1b 7e 7c mr r30,r3 9cdbc: 08 00 81 91 stw r12,8(r1) 9cdc0: 11 ff 21 f8 stdu r1,-240(r1) 9cdc4: 4c 01 9d 41 bgt cr7,9cf10 <_int_malloc+0x180> 9cdc8: 20 00 a4 2b cmpldi cr7,r4,32 ... 9cf08: 00 00 00 60 nop 9cf0c: 00 00 42 60 ori r2,r2,0 9cf10: e4 06 ff 7b rldicr r31,r31,0,59 9cf14: 40 f8 a4 7f cmpld cr7,r4,r31 9cf18: 68 05 9d 41 bgt cr7,9d480 <_int_malloc+0x6f0> ... 000000000009e3c0 <tcache_init.part.4>: ... 9e420: 40 02 80 38 li r4,576 9e424: 78 fb e3 7f mr r3,r31 9e428: 71 e9 ff 4b bl 9cd98 <_int_malloc+0x8> 9e42c: 00 00 a3 2f cmpdi cr7,r3,0 9e430: 78 1b 7e 7c mr r30,r3 ... 000000000009f7a0 <__libc_malloc>: ... 9f8f8: 00 00 89 2f cmpwi cr7,r9,0 9f8fc: 1c ff 9e 40 bne cr7,9f818 <__libc_malloc+0x78> 9f900: c9 ea ff 4b bl 9e3c8 <tcache_init.part.4+0x8> 9f904: 00 00 00 60 nop 9f908: e8 90 22 e9 ld r9,-28440(r2) ... # perf probe -x /usr/lib64/libc-2.26.so -a _int_malloc+0x180 # perf record -e probe_libc:_int_malloc -g ./test-malloc # perf script Before: test-malloc 6554 [009] 515975.797403: probe_libc:_int_malloc: (7fffa6e6cf10) 7fffa6e6cf10 _int_malloc+0x180 (/usr/lib64/libc-2.26.so) 7fffa6dd0000 [unknown] (/usr/lib64/libc-2.26.so) 7fffa6e6f904 malloc+0x164 (/usr/lib64/libc-2.26.so) 7fffa6e6f9fc malloc+0x25c (/usr/lib64/libc-2.26.so) 100006b4 main+0x38 (/home/testuser/test-malloc) 7fffa6df36a0 generic_start_main.isra.0+0x140 (/usr/lib64/libc-2.26.so) 7fffa6df3898 __libc_start_main+0xb8 (/usr/lib64/libc-2.26.so) 0 [unknown] ([unknown]) After: test-malloc 6554 [009] 515975.797403: probe_libc:_int_malloc: (7fffa6e6cf10) 7fffa6e6cf10 _int_malloc+0x180 (/usr/lib64/libc-2.26.so) 7fffa6e6e42c tcache_init.part.4+0x6c (/usr/lib64/libc-2.26.so) 7fffa6e6f904 malloc+0x164 (/usr/lib64/libc-2.26.so) 7fffa6e6f9fc malloc+0x25c (/usr/lib64/libc-2.26.so) 100006b4 main+0x38 (/home/sandipan/test-malloc) 7fffa6df36a0 generic_start_main.isra.0+0x140 (/usr/lib64/libc-2.26.so) 7fffa6df3898 __libc_start_main+0xb8 (/usr/lib64/libc-2.26.so) 0 [unknown] ([unknown]) Signed-off-by:
Sandipan Das <sandipan@linux.ibm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Maynard Johnson <maynard@us.ibm.com> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com> Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Fixes: a60335ba ("perf tools powerpc: Adjust callchain based on DWARF debug info") Link: http://lkml.kernel.org/r/24bb726d91ed173aebc972ec3f41a2ef2249434e.1530724939.git.sandipan@linux.ibm.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Krzysztof Kozlowski authored
[ Upstream commit cd480691 ] For most of Exynos SoCs, Power Management Unit (PMU) address space is mapped into global variable 'pmu_base_addr' very early when initializing PMU interrupt controller. A lot of other machine code depends on it so when doing iounmap() on this address, clear the global as well to avoid usage of invalid value (pointing to unmapped memory region). Properly mapped PMU address space is a requirement for all other machine code so this fix is purely theoretical. Boot will fail immediately in many other places after following this error path. Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
-
Fredrik Noring authored
[ Upstream commit 1ba0a59c ] I discovered the problem when developing a frame buffer driver for the PlayStation 2 (not yet merged), using the following video modes for the PlayStation 3 in drivers/video/fbdev/ps3fb.c: }, { /* 1080if */ "1080if", 50, 1920, 1080, 13468, 148, 484, 36, 4, 88, 5, FB_SYNC_BROADCAST, FB_VMODE_INTERLACED }, { /* 1080pf */ "1080pf", 50, 1920, 1080, 6734, 148, 484, 36, 4, 88, 5, FB_SYNC_BROADCAST, FB_VMODE_NONINTERLACED }, In ps3fb_probe, the mode_option module parameter is used with fb_find_mode but it can only select the interlaced variant of 1920x1080 since the loop matching the modes does not take the difference between interlaced and progressive modes into account. In short, without the patch, progressive 1920x1080 cannot be chosen as a mode_option parameter since fb_find_mode (falsely) thinks interlace is a perfect match. Signed-off-by:
Fredrik Noring <noring@nocrew.org> Cc: "Maciej W. Rozycki" <macro@linux-mips.org> [b.zolnierkie: updated patch description] Signed-off-by:
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by:
-
Sandipan Das authored
[ Upstream commit 9068533e ] For powerpc64, perf will filter out the second entry in the callchain, i.e. the LR value, if the return address of the function corresponding to the probed location has already been saved on its caller's stack. The state of the return address is determined using debug information. At any point within a function, if the return address is already saved somewhere, a DWARF expression can tell us about its location. If the return address in still in LR only, no DWARF expression would exist. Typically, the instructions in a function's prologue first copy the LR value to R0 and then pushes R0 on to the stack. If LR has already been copied to R0 but R0 is yet to be pushed to the stack, we can still get a DWARF expression that says that the return address is in R0. This is indicating that getting a DWARF expression for the return address does not guarantee the fact that it has already been saved on the stack. This can be observed on a powerpc64le system running Fedora 27 as shown below. # objdump -d /usr/lib64/libc-2.26.so | less ... 000000000015af20 <inet_pton>: 15af20: 0b 00 4c 3c addis r2,r12,11 15af24: e0 c1 42 38 addi r2,r2,-15904 15af28: a6 02 08 7c mflr r0 15af2c: f0 ff c1 fb std r30,-16(r1) 15af30: f8 ff e1 fb std r31,-8(r1) 15af34: 78 1b 7f 7c mr r31,r3 15af38: 78 23 83 7c mr r3,r4 15af3c: 78 2b be 7c mr r30,r5 15af40: 10 00 01 f8 std r0,16(r1) 15af44: c1 ff 21 f8 stdu r1,-64(r1) 15af48: 28 00 81 f8 std r4,40(r1) ... # readelf --debug-dump=frames-interp /usr/lib64/libc-2.26.so | less ... 00027024 0000000000000024 00027028 FDE cie=00000000 pc=000000000015af20..000000000015af88 LOC CFA r30 r31 ra 000000000015af20 r1+0 u u u 000000000015af34 r1+0 c-16 c-8 r0 000000000015af48 r1+64 c-16 c-8 c+16 000000000015af5c r1+0 c-16 c-8 c+16 000000000015af78 r1+0 u u ... # perf probe -x /usr/lib64/libc-2.26.so -a inet_pton+0x18 # perf record -e probe_libc:inet_pton -g ping -6 -c 1 ::1 # perf script Before: ping 2829 [005] 512917.460174: probe_libc:inet_pton: (7fff7e2baf38) 7fff7e2baf38 __GI___inet_pton+0x18 (/usr/lib64/libc-2.26.so) 7fff7e2705b4 getaddrinfo+0x164 (/usr/lib64/libc-2.26.so) 12f152d70 _init+0xbfc (/usr/bin/ping) 7fff7e1836a0 generic_start_main.isra.0+0x140 (/usr/lib64/libc-2.26.so) 7fff7e183898 __libc_start_main+0xb8 (/usr/lib64/libc-2.26.so) 0 [unknown] ([unknown]) After: ping 2829 [005] 512917.460174: probe_libc:inet_pton: (7fff7e2baf38) 7fff7e2baf38 __GI___inet_pton+0x18 (/usr/lib64/libc-2.26.so) 7fff7e26fa54 gaih_inet.constprop.7+0xf44 (/usr/lib64/libc-2.26.so) 7fff7e2705b4 getaddrinfo+0x164 (/usr/lib64/libc-2.26.so) 12f152d70 _init+0xbfc (/usr/bin/ping) 7fff7e1836a0 generic_start_main.isra.0+0x140 (/usr/lib64/libc-2.26.so) 7fff7e183898 __libc_start_main+0xb8 (/usr/lib64/libc-2.26.so) 0 [unknown] ([unknown]) Reported-by:
Ravi Bangoria <ravi.bangoria@linux.ibm.com> Signed-off-by:
-
Randy Dunlap authored
[ Upstream commit b6566b47 ] Fix a build warning in viafbdev.c when CONFIG_PROC_FS is not enabled by marking the unused function as __maybe_unused. ../drivers/video/fbdev/via/viafbdev.c:1471:12: warning: 'viafb_sup_odev_proc_show' defined but not used [-Wunused-function] Signed-off-by:
-
Anton Vasilyev authored
[ Upstream commit 5958fde7 ] goldfish_fb_probe() allocates memory for fb, but goldfish_fb_remove() does not have deallocation of fb, which leads to memory leak on probe/remove. The patch adds deallocation into goldfish_fb_remove(). Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Anton Vasilyev <vasilyev@ispras.ru> Cc: Aleksandar Markovic <aleksandar.markovic@mips.com> Cc: Miodrag Dinic <miodrag.dinic@mips.com> Cc: Goran Ferenc <goran.ferenc@mips.com> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit 5ec1ec35 ] The omapfb_register_client[] array has OMAPFB_PLANE_NUM elements so the > should be >= or we are one element beyond the end of the array. Fixes: 8b08cf2b ("OMAP: add TI OMAP framebuffer driver") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Cc: Imre Deak <imre.deak@solidboot.com> Signed-off-by:
-
Randy Dunlap authored
[ Upstream commit 1d25e3ee ] Fix 2 printk format warnings (this driver is currently only used by arch/sh/) by using "%pap" instead of "%lx". Fixes these build warnings: ../drivers/mtd/maps/solutionengine.c: In function 'init_soleng_maps': ../include/linux/kern_levels.h:5:18: warning: format '%lx' expects argument of type 'long unsigned int', but argument 2 has type 'resource_size_t' {aka 'unsigned int'} [-Wformat=] ../drivers/mtd/maps/solutionengine.c:62:54: note: format string is defined here printk(KERN_NOTICE "Solution Engine: Flash at 0x%08lx, EPROM at 0x%08lx\n", ~~~~^ %08x ../include/linux/kern_levels.h:5:18: warning: format '%lx' expects argument of type 'long unsigned int', but argument 3 has type 'resource_size_t' {aka 'unsigned int'} [-Wformat=] ../drivers/mtd/maps/solutionengine.c:62:72: note: format string is defined here printk(KERN_NOTICE "Solution Engine: Flash at 0x%08lx, EPROM at 0x%08lx\n", ~~~~^ %08x Cc: David Woodhouse <dwmw2@infradead.org> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Boris Brezillon <boris.brezillon@bootlin.com> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Richard Weinberger <richard@nod.at> Cc: linux-mtd@lists.infradead.org Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Rich Felker <dalias@libc.org> Cc: linux-sh@vger.kernel.org Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by:
-
Hans Verkuil authored
[ Upstream commit b509d733 ] The vb2_core_qbuf() function didn't check if q->error was set. It is checked in __buf_prepare(), but that function isn't called if the buffer was already prepared before with VIDIOC_PREPARE_BUF. So check it at the start of vb2_core_qbuf() as well. Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Acked-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by:
-
Felix Fietkau authored
[ Upstream commit f8a7bfe1 ] This patch disables irq on reboot to fix hang issues that were observed due to pending interrupts. Signed-off-by:
Felix Fietkau <nbd@nbd.name> Signed-off-by:
John Crispin <john@phrozen.org> Signed-off-by:
-
John Keeping authored
[ Upstream commit e4975654 ] In pl330_update() when checking if a channel has been aborted, the channel's lock is not taken, only the overall pl330_dmac lock. But in pl330_terminate_all() the aborted flag (req_running==-1) is set under the channel lock and not the pl330_dmac lock. With threaded interrupts, this leads to a potential race: pl330_terminate_all pl330_update ------------------- ------------ lock channel entry lock pl330 _stop channel unlock pl330 lock pl330 check req_running != -1 req_running = -1 _start channel Signed-off-by:
John Keeping <john@metanate.com> Signed-off-by:
Vinod Koul <vkoul@kernel.org> Signed-off-by:
-
Masahiro Yamada authored
[ Upstream commit 9c2af1c7 ] If Make gets a fatal signal while a shell is executing, it may delete the target file that the recipe was supposed to update. This is needed to make sure that it is remade from scratch when Make is next run; if Make is interrupted after the recipe has begun to write the target file, it results in an incomplete file whose time stamp is newer than that of the prerequisites files. Make automatically deletes the incomplete file on interrupt unless the target is marked .PRECIOUS. The situation is just the same as when the shell fails for some reasons. Usually when a recipe line fails, if it has changed the target file at all, the file is corrupted, or at least it is not completely updated. Yet the file’s time stamp says that it is now up to date, so the next time Make runs, it will not try to update that file. However, Make does not cater to delete the incomplete target file in this case. We need to add .DELETE_ON_ERROR somewhere in the Makefile to request it. scripts/Kbuild.include seems a suitable place to add it because it is included from almost all sub-makes. Please note .DELETE_ON_ERROR is not effective for phony targets. The external module building should never ever touch the kernel tree. The following recipe fails if include/generated/autoconf.h is missing. However, include/config/auto.conf is not deleted since it is a phony target. PHONY += include/config/auto.conf include/config/auto.conf: $(Q)test -e include/generated/autoconf.h -a -e $@ || ( \ echo >&2; \ echo >&2 " ERROR: Kernel configuration is invalid."; \ echo >&2 " include/generated/autoconf.h or $@ are missing.";\ echo >&2 " Run 'make oldconfig && make prepare' on kernel src to fix it."; \ echo >&2 ; \ /bin/false) Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
-
Nicholas Mc Guire authored
[ Upstream commit 11177e7a ] of_find_compatible_node() is returning a device node with refcount incremented and must be explicitly decremented after the last use which is right after the us in of_iomap() here. Signed-off-by:
Nicholas Mc Guire <hofrat@osadl.org> Fixes: 787b4271 ("clk: imx: add imx6ul clk tree support") Signed-off-by:
Stephen Boyd <sboyd@kernel.org> Signed-off-by:
-
Andreas Gruenbacher authored
[ Upstream commit 77612578 ] To speed up the common case of appending to a file, gfs2_write_alloc_required presumes that writing beyond the end of a file will always require additional blocks to be allocated. This assumption is incorrect for preallocates files, but there are no negative consequences as long as *some* space is still left on the filesystem. One special file that always has some space preallocated beyond the end of the file is the rindex: when growing a filesystem, gfs2_grow adds one or more new resource groups and appends records describing those resource groups to the rindex; the preallocated space ensures that this is always possible. However, when a filesystem is completely full, gfs2_write_alloc_required will indicate that an additional allocation is required, and appending the next record to the rindex will fail even though space for that record has already been preallocated. To fix that, skip the incorrect optimization in gfs2_write_alloc_required, but for the rindex only. Other writes to preallocated space beyond the end of the file are still allowed to fail on completely full filesystems. Signed-off-by:
Andreas Gruenbacher <agruenba@redhat.com> Reviewed-by:
Bob Peterson <rpeterso@redhat.com> Signed-off-by:
-
YueHaibing authored
[ Upstream commit 934ffce1 ] Fix a static code checker warning: net/xfrm/xfrm_policy.c:1836 xfrm_resolve_and_create_bundle() warn: passing zero to 'ERR_PTR' xfrm_tmpl_resolve return 0 just means no xdst found, return NULL instead of passing zero to ERR_PTR. Fixes: d809ec89 ("xfrm: do not assume that template resolving always returns xfrms") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
-
Takashi Iwai authored
[ Upstream commit bd1cd0eb ] AU0828_DEVICE() macro in quirks-table.h uses USB_DEVICE_VENDOR_SPEC() for expanding idVendor and idProduct fields. However, the latter macro adds also match_flags and bInterfaceClass, which are different from the values AU0828_DEVICE() macro sets after that. For fixing them, just expand idVendor and idProduct fields manually in AU0828_DEVICE(). This fixes sparse warnings like: sound/usb/quirks-table.h:2892:1: warning: Initializer entry defined twice Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Takashi Iwai authored
[ Upstream commit 7c500f9e ] The default sample sizes set by msnd driver are bogus; it sets ALSA PCM format, not the actual bit width. Signed-off-by:
-
Miao Zhong authored
[ Upstream commit 0d535967 ] When PRI queue occurs overflow, driver should update the OVACKFLG to the PRIQ consumer register, otherwise subsequent PRI requests will not be processed. Cc: Will Deacon <will.deacon@arm.com> Cc: Robin Murphy <robin.murphy@arm.com> Signed-off-by:
Miao Zhong <zhongmiao@hisilicon.com> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
- 19 Sep, 2018 13 commits
-
-
Greg Kroah-Hartman authored
-
Linus Torvalds authored
commit 7a9cdebd upstream. Jann Horn points out that the vmacache_flush_all() function is not only potentially expensive, it's buggy too. It also happens to be entirely unnecessary, because the sequence number overflow case can be avoided by simply making the sequence number be 64-bit. That doesn't even grow the data structures in question, because the other adjacent fields are already 64-bit. So simplify the whole thing by just making the sequence number overflow case go away entirely, which gets rid of all the complications and makes the code faster too. Win-win. [ Oleg Nesterov points out that the VMACACHE_FULL_FLUSHES statistics also just goes away entirely with this ] Reported-by:
Jann Horn <jannh@google.com> Suggested-by:
Davidlohr Bueso <dave@stgolabs.net> Cc: Oleg Nesterov <oleg@redhat.com> Cc: stable@kernel.org Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Andi Kleen authored
[upstream cc51e542 for 4.4. Note there might be still a trivial conflict with the backport for b0a182f8, but should be easy to resolve] On Nehalem and newer core CPUs the CPU cache internally uses 44 bits physical address space. The L1TF workaround is limited by this internal cache address width, and needs to have one bit free there for the mitigation to work. Older client systems report only 36bit physical address space so the range check decides that L1TF is not mitigated for a 36bit phys/32GB system with some memory holes. But since these actually have the larger internal cache width this warning is bogus because it would only really be needed if the system had more than 43bits of memory. Add a new internal x86_cache_bits field. Normally it is the same as the physical bits field reported by CPUID, but for Nehalem and newerforce it to be at least 44bits. Change the L1TF memory size warning to use the new cache_bits field to avoid bogus warnings and remove the bogus comment about memory size. Fixes: 17dbca11 ("x86/speculation/l1tf: Add sysfs reporting for l1tf") Reported-by:
George Anchev <studio@anchev.net> Reported-by:
Christopher Snowhill <kode54@gmail.com> Signed-off-by:
Andi Kleen <ak@linux.intel.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: x86@kernel.org Cc: linux-kernel@vger.kernel.org Cc: Michael Hocko <mhocko@suse.com> Cc: vbabka@suse.cz Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20180824170351.34874-1-andi@firstfloor.orgSigned-off-by:
-
Ian Kent authored
commit 0633da48 upstream. autofs_sbi() does not check the superblock magic number to verify it has been given an autofs super block. Backport Note: autofs4 has been renamed to autofs upstream. As a result the upstream patch does not apply cleanly onto 4.14.y. Link: http://lkml.kernel.org/r/153475422934.17131.7563724552005298277.stgit@pluto.themaw.net Reported-by: <syzbot+87c3c541582e56943277@syzkaller.appspotmail.com> Signed-off-by:
Ian Kent <raven@themaw.net> Reviewed-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Zubin Mithra <zsm@chromium.org> Signed-off-by:
-
Wei Yongjun authored
commit 7233982a upstream. Fix to return error code -ENOMEM from the kmem_cache_alloc() error handling case instead of 0, as done elsewhere in this function. Fixes: f78e5623 ("ubi: fastmap: Erase outdated anchor PEBs during attach") Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by:
Richard Weinberger <richard@nod.at> Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by:
-
Ondrej Mosnacek authored
commit 0522236d upstream. This patch fixes sleep-in-atomic bugs in AES-CBC and AES-XTS VMX implementations. The problem is that the blkcipher_* functions should not be called in atomic context. The bugs can be reproduced via the AF_ALG interface by trying to encrypt/decrypt sufficiently large buffers (at least 64 KiB) using the VMX implementations of 'cbc(aes)' or 'xts(aes)'. Such operations then trigger BUG in crypto_yield(): [ 891.863680] BUG: sleeping function called from invalid context at include/crypto/algapi.h:424 [ 891.864622] in_atomic(): 1, irqs_disabled(): 0, pid: 12347, name: kcapi-enc [ 891.864739] 1 lock held by kcapi-enc/12347: [ 891.864811] #0: 00000000f5d42c46 (sk_lock-AF_ALG){+.+.}, at: skcipher_recvmsg+0x50/0x530 [ 891.865076] CPU: 5 PID: 12347 Comm: kcapi-enc Not tainted 4.19.0-0.rc0.git3.1.fc30.ppc64le #1 [ 891.865251] Call Trace: [ 891.865340] [c0000003387578c0] [c000000000d67ea4] dump_stack+0xe8/0x164 (unreliable) [ 891.865511] [c000000338757910] [c000000000172a58] ___might_sleep+0x2f8/0x310 [ 891.865679] [c000000338757990] [c0000000006bff74] blkcipher_walk_done+0x374/0x4a0 [ 891.865825] [c0000003387579e0] [d000000007e73e70] p8_aes_cbc_encrypt+0x1c8/0x260 [vmx_crypto] [ 891.865993] [c000000338757ad0] [c0000000006c0ee0] skcipher_encrypt_blkcipher+0x60/0x80 [ 891.866128] [c000000338757b10] [c0000000006ec504] skcipher_recvmsg+0x424/0x530 [ 891.866283] [c000000338757bd0] [c000000000b00654] sock_recvmsg+0x74/0xa0 [ 891.866403] [c000000338757c10] [c000000000b00f64] ___sys_recvmsg+0xf4/0x2f0 [ 891.866515] [c000000338757d90] [c000000000b02bb8] __sys_recvmsg+0x68/0xe0 [ 891.866631] [c000000338757e30] [c00000000000bbe4] system_call+0x5c/0x70 Fixes: 8c755ace ("crypto: vmx - Adding CBC routines for VMX module") Fixes: c07f5d3d ("crypto: vmx - Adding support for XTS") Cc: stable@vger.kernel.org Signed-off-by:
Ondrej Mosnacek <omosnace@redhat.com> Signed-off-by:
-
Peter Chen authored
commit 5817f977 upstream. of_node_put needs to be called when the device node which is got from of_parse_phandle has finished using. Signed-off-by:
Peter Chen <peter.chen@nxp.com> Signed-off-by:
SZ Lin (林上智) <sz.lin@moxa.com> Signed-off-by:
-
Johan Hovold authored
commit 86e1d5ad upstream. Make sure to drop the reference taken by of_find_device_by_node() when looking up an mdio device from a phy_id property during probe. Fixes: 549985ee ("cpsw: simplify the setup of the register pointers") Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
David Rivshin authored
commit 552165bc upstream. Commit 9e42f715 ("drivers: net: cpsw: add phy-handle parsing") saved the "phy-handle" phandle into a new cpsw_priv field. However, phy connections are per-slave, so the phy_node field should be in cpsw_slave_data rather than cpsw_priv. This would go unnoticed in a single emac configuration. But in dual_emac mode, the last "phy-handle" property parsed for either slave would be used by both of them, causing them both to refer to the same phy_device. Fixes: 9e42f715 ("drivers: net: cpsw: add phy-handle parsing") Signed-off-by:
David Rivshin <drivshin@allworx.com> Tested-by:
Nicolas Chauvet <kwizart@gmail.com> Tested-by:
Andrew Goodbody <andrew.goodbody@cambrionix.com> Reviewed-by:
Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by:
Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by:
-
Eric Dumazet authored
commit e466af75 upstream. syzkaller reports an out of bound read in strlcpy(), triggered by xt_copy_counters_from_user() Fix this by using memcpy(), then forcing a zero byte at the last position of the destination, as Florian did for the non COMPAT code. Fixes: d7591f0c ("netfilter: x_tables: introduce and use xt_copy_counters_from_user") Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Acked-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Cc: Greg Hackmann <ghackmann@google.com> Signed-off-by:
-
Nadav Amit authored
Fix a build error due to missing virt_to_phys() Reported-by:
kbuild test robot <lkp@intel.com> Fixes: f0a1bf29 ("vmw_balloon: fix inflation with batching") Cc: stable@vger.kernel.org Cc: Xavier Deguillard <xdeguillard@vmware.com> Signed-off-by:
Nadav Amit <namit@vmware.com> Signed-off-by:
-
Mathias Nyman authored
commit 44a182b9 upstream. KASAN found a use-after-free in xhci_free_virt_device+0x33b/0x38e where xhci_free_virt_device() sets slot id to 0 if udev exists: if (dev->udev && dev->udev->slot_id) dev->udev->slot_id = 0; dev->udev will be true even if udev is freed because dev->udev is not set to NULL. set dev->udev pointer to NULL in xhci_free_dev() The original patch went to stable so this fix needs to be applied there as well. Fixes: a400efe4 ("xhci: zero usb device slot_id member when disabling and freeing a xhci slot") Cc: <stable@vger.kernel.org> Reported-by:
Guenter Roeck <linux@roeck-us.net> Reviewed-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
Matthias Kaehlcke <mka@chromium.org> Signed-off-by:
-
Parav Pandit authored
[ Upstream commit 643d213a ] Currently if the cm_id is not bound to any netdevice, than for such cm_id, net namespace is ignored; which is incorrect. Regardless of cm_id bound to a netdevice or not, net namespace must match. When a cm_id is bound to a netdevice, in such case net namespace and netdevice both must match. Fixes: 4c21b5bc ("IB/cma: Add net_dev and private data checks to RDMA CM") Signed-off-by:
Parav Pandit <parav@mellanox.com> Reviewed-by:
Daniel Jurgens <danielj@mellanox.com> Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
