Replace long_delay() with msleep() to guarantee the task
delays as desired.
Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Replace long_delay() with msleep() to guarantee the task
delays as desired.
Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

From: Domen Puncer <domen@coderock.org>
Signed-off-by: Maximilian Attems <janitor@sternwelten.at>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Remove unused function long_delay().
Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Uses msleep() instead of schedule_timeout() to guarantee
the task delays the desired time.
Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

From: Domen Puncer <domen@coderock.org>
Signed-off-by: Maximilian Attems <janitor@sternwelten.at>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

From: Domen Puncer <domen@coderock.org>
Signed-off-by: Maximilian Attems <janitor@sternwelten.at>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Patch taken from http://www.codemonkey.org.uk/projects/pci/pci.ids-2004-08-02.diff
and tweaked by hand to build with no warnings.
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

into kroah.com:/home/greg/linux/BK/pci-2.6

into ppc970.osdl.org:/home/torvalds/v2.6/linux

into pobox.com:/spare/repo/net-drivers-2.6

into pobox.com:/spare/repo/net-drivers-2.6

Bugzilla #2905

During receive processing, the tg3 card updates rx_producer (the
hardware position in the receive ring) and the opaque cookie. Due to PCI
rules the stores happen in order. However the cpu may reorder the reads.

In these sort of cases there is usually a data dependency between
reading the index and looking up the data (since we use the index to
load the data). I think all cpus except alpha guarantee the reads
happen in order in this case.

However in this particular case we load hw_idx, compare it to sw_idx and
then use sw_idx to locate the opaque cookie. There is no data dependency
in this case. We need a read memory barrier between the read of
rx_producer and the opaque cookie to enforce ordering.

Thanks to Olof Johansson, Michael Chan and Broadcom for their assistance
in finding this bug.
Signed-off-by: Anton Blanchard <anton@samba.org>

From: Bill Nottingham <notting@redhat.com>

airo creates /proc/driver/aironet/<device name> on device activation.
However, the device can be renamed - then on teardown it tries to remove
the wrong directory.  The removal of /proc/driver/aironet then runs afoul
of the BUG_ON() in remove_proc_entry.

This fixes it by keeping a copy of the name of the directory it created.

(It doesn't actually solve the problem of the stats directory still being
/proc/driver/aironet/eth0 when you rename the device to, say, 'joe'.  But
that patch would be a little less trivial.)
Signed-off-by: Andrew Morton <akpm@osdl.org>

2004-07-12 Margit Schubert-While <margitsw@t-online.de>

* The OID type for BSSID was incorrectly set to type SSID.
  It should be type RAW. This lead to interesting reporting
  by "iwpriv ethX g_bssid".
  (Which caused garbage output and possibly an out of bound)

* Be ultra-cautious in reporting SSID by changing the "%s"
  to "%.*s" and passing the length. (Prompted by the false
  type above, whereby length = 0 and a %s on a garbage field)

into pobox.com:/spare/repo/net-drivers-2.6

into pobox.com:/spare/repo/net-drivers-2.6

into pobox.com:/spare/repo/net-drivers-2.6

It's tulip driver, and tulip driver performs better than dmfe
(yet some distro installers pick this driver to use).

Requested by ALi.

 From:  a.othieno@bluewin.ch (Arthur Othieno)

Here it is.  The patch fixes all compile errors and warnings in
pci-skeleton.c.  The "debug" parameter lacks corresponding variable,
so I removed it to avoid a warning on module load.  Obsolete
pci_power_on() and pci_power_off() have been replaced with the new
code using pci_set_power_state(), pci_save_state() and
pci_restore_state().  The driver has been tested by compiling it as
module and as part of the kernel.

I found a bug in rpaphp code during DLPAR I/O testing.   When DLPAR ADD
a non-empty I/O slot to a partition,  an adapter  in the slot  didn't
get configured. The attached patch fixes that.
Signed-off-by: Linda Xie <lxie@us.ibm.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

OK, sorry to bother, some more bits.

- Add PCI IDs for the IXP2400 and IXP2800 network processors.
- Fix typo in description for 8086:9000.
- Correct tab->space after #define in definition of IXP4xx device ID.
- ENP-2611 can appear behind a 21555.
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

This patch adds the first driver that actually uses the callback
function for attention LEDs that the acpiphp-attention patch
adds.  It searches the ACPI namespace for IBM hardware, sets up
the callbacks and sets up a handler to read ACPI events and
forward them on to /proc/acpi/event.  It also exports an ACPI
table that shows current hotplug status to userland.
Signed-off-by: Vernon Mauery <vernux@us.ibm.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

This patch adds the ability to register callback functions with
the acpiphp core to set and get the current attention LED
status.  The reason this is needed is because there is not set
ACPI standard for how this is done so each hardware platform may
implement it differently.  To keep hardware specific code out of
acpiphp, we allow other modules to register their code with it.
Signed-off-by: Vernon Mauery <vernux@us.ibm.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

into hostme.bitkeeper.com:/repos/j/jfs/linux-2.5

Using "-W" found a few places that should probably use signed
variables since they can contain (and check for) negative error
values.

While reading code, I found this buglet.  If the TIOCGWINSZ fails,
mconf.c assumes 24/80 as screen size, without honoring the LINES and
COLUMNS environment variables.  This is the shorter and IMHO more
correct version.
Signed-off-by: Jan-Benedict Glaw <jbglaw@lug-owl.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

mcdx has different IRQ numbers for all drives; irq handler needs a
pointer to structure describing the drive in question.  However, instead
of passing such pointer at request_irq() time and having it passed to
mcdx_intr() for free, mcdx.c sticks the pointer in question into an
array indexed by IRQ number and has mcdx_intr() go look it up there. 

Cleaned up, array killed.

	Trivial annotations + typo fix in _snd_ioctl32_hwdep_dsp_image()
(we want to copy 32bit structure from userland, convert it to native one
and do normal ioctl on it; see the first changed line below for what's
really happening...)

	Missing '=' in C99 initializer

	Usual "inline used before definition" fixes in nsp32.c and sg.c

	Almost all are trivial, aacraid/linit.c annotations had caught a bug -
copy_from_user() where copy_in_user() should've been.

	Extraction of int from pointer is slightly broken in several places.

	Casts from __user to address-space-agnostic in amd64 and i386
made explicit (__force added; in these places we pass userland pointer
to arch-specific code that handles kernel and userland pointers the
same way).
	csum_partial_copy_*() annotated properly