Merge branch 's5p-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung

* 's5p-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  ARM: S3C64XX: Update regulator names for debugfs compatiblity on SMDK6410
  ARM: S3C64XX: Fix build with WM1190 disabled and WM1192 enabled on SMDK6410
  ARM: S3C64XX: Reduce output of s3c64xx_dma_init1()
  ARM: S3C64XX: Tone down SDHCI debugging
  ARM: S3C64XX: Add clock for i2c1
  ARM: S3C64XX: Staticise non-exported GPIO to interrupt functions
  ARM: SAMSUNG: Include devs.h in dev-uart.c to prototype devices
  ARM: S3C64XX: Fix keypad setup to configure correct number of rows
  ARM: S3C2440: Fix usage gpio bank j pin definitions on GTA02
  ARM: S5P64X0: Fix number of GPIO lines in Bank F
  ARM: S3C2440: Select missing S3C_DEV_USB_HOST on GTA02

* 'fixes' of master.kernel.org:/home/rmk/linux-2.6-arm:
  davinci: cpufreq: fix section mismatch warning
  DaVinci: fix compilation warnings in <mach/clkdev.h>
  davinci: tnetv107x: fix register indexing for GPIOs numbers > 31
  davinci: da8xx/omap-l1x: add platform device for davinci-pcm-audio
  ARM: pxa/tosa: register wm9712 codec device
  ARM: pxa: enable pxa-pcm-audio on pxa210/pxa25x platform
  ARM: pxa/colibri: don't register pxa2xx-pcmcia nodes on non-colibri platforms
  ARM: pxa/tosa: drop setting LED trigger name, as it's unsupported now
  ARM: 6762/1: Update number of VIC for S5P6442 and S5PC100
  ARM: 6761/1: Update number of VIC for S5PV210
  ARM: 6768/1: hw_breakpoint: ensure debug logic is powered up on v7 cores
  ARM: 6767/1: ptrace: fix register indexing in GETHBPREGS request
  ARM: 6765/1: remove obsolete comment from asm/mach/arch.h
  ARM: 6757/1: fix tlb.h induced linux/swap.h build failure

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc:
  mmc: sdio: Allow sdio operations in other threads during sdio_add_func()

* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm: index i shadowed in 2nd loop
  drm/nv50-nvc0: prevent multiple vm/bar flushes occuring simultanenously
  drm/nouveau: fix regression causing ttm to not be able to evict vram
  drm/i915: Rebind the buffer if its alignment constraints changes with tiling
  drm/i915: Disable GPU semaphores by default
  drm/i915: Do not overflow the MMADDR write FIFO
  Revert "drm/i915: fix corruptions on i8xx due to relaxed fencing"

Index i was already used in thhe first loop
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

This fixes a bug introduced by 807e8e40 ("mmc: Fix sd/sdio/mmc
initialization frequency retries") that prevented SDIO drivers from
performing SDIO commands in their probe routines -- the above patch
called mmc_claim_host() before sdio_add_func(), which causes a deadlock
if an external SDIO driver calls sdio_claim_host().

Fix tested on an OLPC XO-1.75 with libertas on SDIO.
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
Reviewed-and-Tested-by: Chris Ball <cjb@laptop.org>
Signed-off-by: Chris Ball <cjb@laptop.org>

* ickle/drm-intel-fixes:
  drm/i915: Rebind the buffer if its alignment constraints changes with tiling
  drm/i915: Disable GPU semaphores by default
  drm/i915: Do not overflow the MMADDR write FIFO
  Revert "drm/i915: fix corruptions on i8xx due to relaxed fencing"

Merge branch 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6

* 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6:
  omap: mailbox: resolve hang issue
  OMAP2+: PM: SmartReflex: fix memory leaks in Smartreflex driver
  arm: mach-omap2: smartreflex: fix another memory leak

* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6:
  [S390] tape: deadlock on system work queue
  [S390] keyboard: integer underflow bug
  [S390] xpram: remove __initdata attribute from module parameters

The per-vm mutex doesn't prevent this completely, a flush coming from the
BAR VM could potentially happen at the same time as one for the channel
VM.  Not to mention that if/when we get per-client/channel VM, this will
happen far more frequently.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

TTM assumes an error condition from man->func->get_node() means that
something went horribly wrong, and causes it to bail.

The driver is supposed to return 0, and leave mm_node == NULL to
signal that it couldn't allocate any memory.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Early gen3 and gen2 chipset do not have the relaxed per-surface tiling
constraints of the later chipsets, so we need to check that the GTT
alignment is correct for the new tiling. If it is not, we need to
rebind.
Reported-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

Andi Kleen narrowed his GPU hangs on his Sugar Bay (SNB desktop) rev 09
down to the use of GPU semaphores, and we already know that they appear
broken up to Huron River (mobile) rev 08. (I'm optimistic that disabling
GPU semaphores is simply hiding another bug by the latency and
side-effects of the additional device interaction it introduces...)

However, use of semaphores is a massive performance improvement... Only
as long as the system remains stable. Enable at your peril.
Reported-by: Andi Kleen <andi-fd@firstfloor.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=33921Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: hda - Don't set to D3 in Cirrus errata init verbs
  ALSA: hda - add new Fermi 5xx codec IDs to snd-hda
  ASoC: WM8994: Ensure late enable events are processed for the ADCs
  ASoC: WM8994: Don't disable the AIF[1|2]CLK_ENA unconditionaly
  ASoC: Fix WM9081 platform data initialisation
  ALSA: hda - Fix unable to record issue on ASUS N82JV
  ALSA: HDA: Realtek: Fixup jack detection to input subsystem

If a virtio-console device gets unplugged while a port is open, a
subsequent close() call on the port accesses vqs to free up buffers.
This can lead to a crash.

The buffers are already freed up as a result of the call to
unplug_ports() from virtcons_remove().  The fix is to simply not access
vq information if port->portdev is NULL.
Reported-by: juzhang <juzhang@redhat.com>
CC: stable@kernel.org
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Whilst the GT is powered down (rc6), writes to MMADDR are placed in a
FIFO by the System Agent. This is a limited resource, only 64 entries, of
which 20 are reserved for Display and PCH writes, and so we must take
care not to queue up too many writes. To avoid this, there is counter
which we can poll to ensure there are sufficient free entries in the
fifo.

"Issuing a write to a full FIFO is not supported; at worst it could
result in corruption or a system hang."
Reported-and-Tested-by: Matt Turner <mattst88@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=34056Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

This reverts commit c2e0eb16.

As it turns out, userspace already depends upon being able to enable
tiling on existing bo which it promises to be large enough for its
purposes i.e. it will not access beyond the end of the last full-tile
row.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=35016Reported-and-tested-by: Kamal Mostafa <kamal@canonical.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
  ceph: no .snap inside of snapped namespace
  libceph: fix msgr standby handling
  libceph: fix msgr keepalive flag
  libceph: fix msgr backoff
  libceph: retry after authorization failure
  libceph: fix handling of short returns from get_user_pages
  ceph: do not clear I_COMPLETE from d_release
  ceph: do not set I_COMPLETE
  Revert "ceph: keep reference to parent inode on ceph_dentry"

Pass down the correct node for a transparent hugepage allocation.  Most
callers continue to use the current node, however the hugepaged daemon
now uses the previous node of the first to be collapsed page instead.
This ensures that khugepaged does not mess up local memory for an
existing process which uses local policy.

The choice of node is somewhat primitive currently: it just uses the
node of the first page in the pmd range.  An alternative would be to
look at multiple pages and use the most popular node.  I used the
simplest variant for now which should work well enough for the case of
all pages being on the same node.

[akpm@linux-foundation.org: coding-style fixes]
Acked-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This makes a difference for LOCAL policy, where the node cannot be
determined from the policy itself, but has to be gotten from the original
page.
Acked-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Add a alloc_page_vma_node that allows passing the "local" node in.  Used
in a followon patch.
Acked-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Currently alloc_pages_vma() always uses the local node as policy node for
the LOCAL policy.  Pass this node down as an argument instead.

No behaviour change from this patch, but will be needed for followons.
Acked-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Add maintainer of Samsung Mobile machine support.  Currently, Aquila,
Goni, Universal (C210), and Nuri board are supported.
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Joe Perches <joe@perches.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This driver causes hard lockups, when the active clock soure is jiffies.

The reason is that it loops with interrupts disabled waiting for a
timestamp to be reached by polling getnstimeofday().  Though with a
jiffies clocksource, when that code runs on the same CPU which is
responsible for updating jiffies, then we loop in circles for ever
simply because the timer interrupt cannot update jiffies.  So both UP
and SMP can be affected.

There is no easy fix for that problem so make it depend on BROKEN for
now.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Alexander Gordeev <lasaine@lvk.cs.msu.su>
Cc: Rodolfo Giometti <giometti@linux.it>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The device table is required to load modules based on modaliases.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Cc: Shubhrajyoti D <shubhrajyoti@ti.com>
Cc: Christoph Mair <christoph.mair@gmail.com>
Cc: Jonathan Cameron <jic23@cam.ac.uk>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Don't forget to release cgroup_mutex if alloc_trial_cpuset() fails.

[akpm@linux-foundation.org: avoid multiple return points]
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Miao Xie <miaox@cn.fujitsu.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix s3c_rtc_setaie() prototype to eliminate the following compile
warning:

  drivers/rtc/rtc-s3c.c:383: warning: initialization from incompatible pointer type

(akpm: the rtc_class_ops.alarm_irq_enable() handler is being passed two
arguments where it expects just one, presumably with undesired effects)
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin:
  Blackfin: iflush: update anomaly 05000491 workaround
  Blackfin: outs[lwb]: make sure count is greater than 0

Merge branch 'rmobile-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6

* 'rmobile-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6:
  ARM: mach-shmobile: mackerel: modify LCDC clock divider value
  ARM: mach-shmobile: ap4evb: modify LCDC clock divider value
  ARM: mach-shmobile: mackerel: fixup memory initialize for zboot
  ARM: mach-shmobile: ap4evb: fixup memory initialize for zboot
  ARM: mach-shmobile: Add sh73a0 MIPI-CSI and CEU clocks
  ARM: mach-shmobile: AG5EVM MIPI-DSI LCD reset delay fix

* 'sh-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6:
  sh: Change __nosave_XXX symbols to long
  sh: Flush executable pages in copy_user_highpage
  sh: Ensure ST40-300 BogoMIPS value is consistent
  sh: sh7750: Fix incompatible pointer type
  sh: sh7750: move machtypes.h to include/generated

* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm/nouveau: allocate kernel's notifier object at end of block

The "bad_page()" page allocator sanity check was reported recently (call
chain as follows):

  bad_page+0x69/0x91
  free_hot_cold_page+0x81/0x144
  skb_release_data+0x5f/0x98
  __kfree_skb+0x11/0x1a
  tcp_ack+0x6a3/0x1868
  tcp_rcv_established+0x7a6/0x8b9
  tcp_v4_do_rcv+0x2a/0x2fa
  tcp_v4_rcv+0x9a2/0x9f6
  do_timer+0x2df/0x52c
  ip_local_deliver+0x19d/0x263
  ip_rcv+0x539/0x57c
  netif_receive_skb+0x470/0x49f
  :virtio_net:virtnet_poll+0x46b/0x5c5
  net_rx_action+0xac/0x1b3
  __do_softirq+0x89/0x133
  call_softirq+0x1c/0x28
  do_softirq+0x2c/0x7d
  do_IRQ+0xec/0xf5
  default_idle+0x0/0x50
  ret_from_intr+0x0/0xa
  default_idle+0x29/0x50
  cpu_idle+0x95/0xb8
  start_kernel+0x220/0x225
  _sinittext+0x22f/0x236

It occurs because an skb with a fraglist was freed from the tcp
retransmit queue when it was acked, but a page on that fraglist had
PG_Slab set (indicating it was allocated from the Slab allocator (which
means the free path above can't safely free it via put_page.

We tracked this back to an nfsv4 setacl operation, in which the nfs code
attempted to fill convert the passed in buffer to an array of pages in
__nfs4_proc_set_acl, which gets used by the skb->frags list in
xs_sendpages.  __nfs4_proc_set_acl just converts each page in the buffer
to a page struct via virt_to_page, but the vfs allocates the buffer via
kmalloc, meaning the PG_slab bit is set.  We can't create a buffer with
kmalloc and free it later in the tcp ack path with put_page, so we need
to either:

1) ensure that when we create the list of pages, no page struct has
   PG_Slab set

 or

2) not use a page list to send this data

Given that these buffers can be multiple pages and arbitrarily sized, I
think (1) is the right way to go.  I've written the below patch to
allocate a page from the buddy allocator directly and copy the data over
to it.  This ensures that we have a put_page free-able page for every
entry that winds up on an skb frag list, so it can be safely freed when
the frame is acked.  We do a put page on each entry after the
rpc_call_sync call so as to drop our own reference count to the page,
leaving only the ref count taken by tcp_sendpages.  This way the data
will be properly freed when the ack comes in

Successfully tested by myself to solve the above oops.

Note, as this is the result of a setacl operation that exceeded a page
of data, I think this amounts to a local DOS triggerable by an
uprivlidged user, so I'm CCing security on this as well.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
CC: Trond Myklebust <Trond.Myklebust@netapp.com>
CC: security@kernel.org
CC: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Otherwise you can do things like

# mkdir .snap/foo
# cd .snap/foo/.snap
# ls
<badness>
Signed-off-by: Sage Weil <sage@newdream.net>

The standby logic used to be pretty dependent on the work requeueing
behavior that changed when we switched to WQ_NON_REENTRANT.  It was also
very fragile.

Restructure things so that:
 - We clear WRITE_PENDING when we set STANDBY.  This ensures we will
   requeue work when we wake up later.
 - con_work backs off if STANDBY is set.  There is nothing to do if we are
   in standby.
 - clear_standby() helper is called by both con_send() and con_keepalive(),
   the two actions that can wake us up again.  Move the connect_seq++
   logic here.
Signed-off-by: Sage Weil <sage@newdream.net>

There was some broken keepalive code using a dead variable.  Shift to using
the proper bit flag.
Signed-off-by: Sage Weil <sage@newdream.net>

With commit f363e45f we replaced a bunch of hacky workqueue mutual
exclusion logic with the WQ_NON_REENTRANT flag.  One pieces of fallout is
that the exponential backoff breaks in certain cases:

 * con_work attempts to connect.
 * we get an immediate failure, and the socket state change handler queues
   immediate work.
 * con_work calls con_fault, we decide to back off, but can't queue delayed
   work.

In this case, we add a BACKOFF bit to make con_work reschedule delayed work
next time it runs (which should be immediately).
Signed-off-by: Sage Weil <sage@newdream.net>

Signed-off-by: Dave Kleikamp <shaggy@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>