- 18 Dec, 2023 13 commits
-
-
Wen Gong authored
Currently a variant value read from DT or SMBIOS is considered while searching board-2.bin, this may fail because not all board-2.bin files contains that symbol. Add fallback board name which removes variant value and searches again in board-2.bin when fails to increase boot up success rate. dmesg log after this patch: [169547.248472] ath12k_pci 0000:05:00.0: boot using board name 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262,variant=test' [169547.248565] ath12k_pci 0000:05:00.0: boot firmware request ath12k/WCN7850/hw2.0/board-2.bin size 180324 [169547.248568] ath12k_pci 0000:05:00.0: board name [169547.248570] ath12k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [169547.248571] ath12k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [169547.248572] ath12k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [169547.248574] ath12k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [169547.248575] ath12k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [169547.248576] ath12k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [169547.248577] ath12k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 32 ard-id=262 [169547.248578] ath12k_pci 0000:05:00.0: board name [169547.248579] ath12k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [169547.248581] ath12k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [169547.248582] ath12k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [169547.248583] ath12k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [169547.248584] ath12k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [169547.248585] ath12k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [169547.248587] ath12k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 36 ard-id=266 [169547.248588] ath12k_pci 0000:05:00.0: board name [169547.248589] ath12k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [169547.248590] ath12k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [169547.248591] ath12k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [169547.248592] ath12k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [169547.248594] ath12k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [169547.248595] ath12k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 31 38 2c 71 6d 69 2d 62 chip-id=18,qmi-b [169547.248596] ath12k_pci 0000:05:00.0: 00000060: 6f 61 72 64 2d 69 64 3d 32 36 36 oard-id=266 [169547.248597] ath12k_pci 0000:05:00.0: failed to fetch board data for bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262,variant=test from ath12k/WCN7850/hw2.0/board-2.bin [169547.248476] ath12k_pci 0000:05:00.0: boot using board name 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [169547.248634] ath12k_pci 0000:05:00.0: boot firmware request ath12k/WCN7850/hw2.0/board-2.bin size 180324 [169547.248636] ath12k_pci 0000:05:00.0: board name [169547.248637] ath12k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [169547.248638] ath12k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [169547.248639] ath12k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [169547.248641] ath12k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [169547.248642] ath12k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [169547.248643] ath12k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [169547.248645] ath12k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 32 ard-id=262 [169547.248646] ath12k_pci 0000:05:00.0: boot found match for name 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [169547.248647] ath12k_pci 0000:05:00.0: boot found board data for 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [169547.248649] ath12k_pci 0000:05:00.0: using board api 2 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by:
Wen Gong <quic_wgong@quicinc.com> Signed-off-by:
Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by:
Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20231216060140.30611-3-quic_bqiang@quicinc.com
-
Wen Gong authored
Currently ath12k only supports string type with bus, chip id and board id such as "bus=ahb,qmi-chip-id=1,qmi-board-id=4" for AHB bus chip and "bus=pci,qmi-chip-id=0,qmi-board-id=255" for PCI bus chip in board-2.bin. For WCN7850, it is not enough to distinguish all different chips. Add a new string type which includes bus, chip id, board id, vendor, device, subsystem-vendor and subsystem-device for WCN7850. ath12k will first load board-2.bin and searches in it for the board data with the above parameters. If matched with one board data, ath12k downloads it to firmware. And if not, downloads board.bin instead. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by:
-
Jeff Johnson authored
In [1] it was identified that in ath10k_wmi_10_4_gen_tdls_peer_update() the memset(skb->data, 0, sizeof(*cmd)) is unnecessary since function ath10k_wmi_alloc_skb() already zeroes skb->data, so remove it. No functional changes, compile tested only. [1] https://lore.kernel.org/linux-wireless/626ae2e7-66f8-423b-b17f-e75c1a6d29b3@embeddedor.com/Signed-off-by:
Jeff Johnson <quic_jjohnson@quicinc.com> Reviewed-by:
Kees Cook <keescook@chromium.org> Reviewed-by:
Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by:
-
Jeff Johnson authored
Currently struct wmi_tdls_peer_capabilities defines: struct wmi_channel peer_chan_list[1]; Per the guidance in [1] this should be a flexible array, and at one point Gustavo was trying to fix this [2], but had questions about the correct behavior when the associated peer_chan_len is 0. I have been unable to determine if firmware requires that at least one record be present even if peer_chan_len is 0. But since that is the current behavior, follow the example from [3] and replace the one-element array with a union that contains both a flexible array and a single instance of the array element. This results in a struct that has the same footprint as the original, so no other driver changes are required. No functional changes, compile tested only. [1] https://docs.kernel.org/process/deprecated.html#zero-length-and-one-element-arrays [2] https://lore.kernel.org/linux-wireless/626ae2e7-66f8-423b-b17f-e75c1a6d29b3@embeddedor.com/ [3] https://lore.kernel.org/linux-wireless/202308301529.AC90A9EF98@keescook/Signed-off-by:
-
Jeff Johnson authored
Currently both the wmi_bcn_tmpl_cmd and wmi_prb_tmpl_cmd structs define: u8 data[1]; Per the guidance in [1] both instances of this should be flexible arrays. However during conversion it was discovered that neither of these structs are actually used, so just remove them. No functional changes, compile tested only. [1] https://docs.kernel.org/process/deprecated.html#zero-length-and-one-element-arraysSigned-off-by:
-
Jeff Johnson authored
Currently struct wmi_pdev_chanlist_update_event defines: struct wmi_channel channel_list[1]; Per the guidance in [1] this should be a flexible array. However during conversion it was discovered that this struct is not used, so just remove the entire struct. No functional changes, compile tested only. [1] https://docs.kernel.org/process/deprecated.html#zero-length-and-one-element-arraysSigned-off-by:
-
Jeff Johnson authored
Currently ath10k defines the following struct: struct wmi_start_scan_tlvs { u8 tlvs[0]; } __packed; Per the guidance in [1] this should be a flexible array. However, a direct replace to u8 tlvs[] results in the compilation error: flexible array member in a struct with no named members This is because C99 6.7.2.1 (16) requires that a structure containing a flexible array member must have more than one named member. So rather than defining a separate struct wmi_start_scan_tlvs which contains the flexible tlvs[] array, just define the tlvs[] array where struct wmi_start_scan_tlvs is being used. No functional changes, compile tested only. [1] https://docs.kernel.org/process/deprecated.html#zero-length-and-one-element-arraysSigned-off-by: -
Jeff Johnson authored
Currently struct wmi_host_mem_chunks defines: struct host_memory_chunk items[1]; Per the guidance in [1] this should be a flexible array. However there is a documented requirement: some fw revisions require at least 1 chunk regardless of count To satisfy this requirement, follow the guidance from [2] and wrap the array in a union which contains both the flexible array and a single instance of the underlying struct. Since the footprint of the struct is unchanged, no additional driver changes are required. No functional changes, compile tested only. [1] https://docs.kernel.org/process/deprecated.html#zero-length-and-one-element-arrays [2] https://lore.kernel.org/linux-wireless/202308301529.AC90A9EF98@keescook/Signed-off-by:
-
Dmitry Antipov authored
In 'ath_ant_try_scan()', (most likely) the 2nd LNA's signal strength should be used in comparison against RSSI when selecting first LNA as the main one. Compile tested only. Found by Linux Verification Center (linuxtesting.org) with SVACE. Signed-off-by:
Dmitry Antipov <dmantipov@yandex.ru> Acked-by:
Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by:
-
Wenli Looi authored
The rate macros are for AR9002 and not correct for AR9003. The AGC 3 macros are unused and have incorrect values, at least for QCN5502, where AR_AGC3_BASE should be 0x2de00. This change does not appear to affect the final binary. Signed-off-by:
Wenli Looi <wlooi@ucalgary.ca> Acked-by:
-
Dmitry Antipov authored
Since 'ath11k_wmi_tlv_parse_alloc()' always operates on 'skb->data, skb->len' tuple, it may be simplified to pass the only 'skb' argument instead (which also implies refactoring of 'ath11k_pull_bcn_tx_status_ev()' and 'ath11k_pull_chan_info_ev()' in the same way). Compile tested only. Signed-off-by:
-
Xingyuan Mo authored
We should check whether the WMI_TLV_TAG_STRUCT_MGMT_TX_COMPL_EVENT tlv is present before accessing it, otherwise a null pointer deference error will occur. Fixes: dc405152 ("ath10k: handle mgmt tx completion event") Signed-off-by:
Xingyuan Mo <hdthky0@gmail.com> Acked-by:
-
- 17 Dec, 2023 2 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/athKalle Valo authored
ath.git patches for v6.8. We have new features only for ath12k but lots of small cleanup for ath10k, ath11k and ath12k. And of course smaller fixes to several drivers. Major changes: ath12k * support one MSI vector * WCN7850: support AP mode
-
Gustavo A. R. Silva authored
Transform zero-length arrays `rate`, `adm_stat` and `msdu_cnt` into proper flexible-array members in anonymous union in `struct mt7996_mcu_all_sta_info_event` via the DECLARE_FLEX_ARRAY() helper; and fix multiple -Warray-bounds warnings: drivers/net/wireless/mediatek/mt76/mt7996/mcu.c:544:61: warning: array subscript <unknown> is outside array bounds of 'struct <anonymous>[0]' [-Warray-bounds=] drivers/net/wireless/mediatek/mt76/mt7996/mcu.c:551:58: warning: array subscript <unknown> is outside array bounds of 'struct <anonymous>[0]' [-Warray-bounds=] drivers/net/wireless/mediatek/mt76/mt7996/mcu.c:553:58: warning: array subscript <unknown> is outside array bounds of 'struct <anonymous>[0]' [-Warray-bounds=] drivers/net/wireless/mediatek/mt76/mt7996/mcu.c:530:61: warning: array subscript <unknown> is outside array bounds of 'struct <anonymous>[0]' [-Warray-bounds=] drivers/net/wireless/mediatek/mt76/mt7996/mcu.c:538:66: warning: array subscript <unknown> is outside array bounds of 'struct <anonymous>[0]' [-Warray-bounds=] drivers/net/wireless/mediatek/mt76/mt7996/mcu.c:540:66: warning: array subscript <unknown> is outside array bounds of 'struct <anonymous>[0]' [-Warray-bounds=] drivers/net/wireless/mediatek/mt76/mt7996/mcu.c:520:57: warning: array subscript <unknown> is outside array bounds of 'struct all_sta_trx_rate[0]' [-Warray-bounds=] drivers/net/wireless/mediatek/mt76/mt7996/mcu.c:526:76: warning: array subscript <unknown> is outside array bounds of 'struct all_sta_trx_rate[0]' [-Warray-bounds=] drivers/net/wireless/mediatek/mt76/mt7996/mcu.c:526:76: warning: array subscript <unknown> is outside array bounds of 'struct all_sta_trx_rate[0]' [-Warray-bounds=] drivers/net/wireless/mediatek/mt76/mt7996/mcu.c:526:76: warning: array subscript <unknown> is outside array bounds of 'struct all_sta_trx_rate[0]' [-Warray-bounds=] drivers/net/wireless/mediatek/mt76/mt7996/mcu.c:526:76: warning: array subscript <unknown> is outside array bounds of 'struct all_sta_trx_rate[0]' [-Warray-bounds=] This results in no differences in binary output, helps with the ongoing efforts to globally enable -Warray-bounds. Reviewed-by:
Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/ZXiU9ayVCslt3qiI@work
-
- 15 Dec, 2023 17 commits
-
-
Kalle Valo authored
In v6.7-rc1 sparse warns: drivers/net/wireless/ath/ath11k/mac.c:4702:15: error: too long token expansion drivers/net/wireless/ath/ath11k/mac.c:4702:15: error: too long token expansion drivers/net/wireless/ath/ath11k/mac.c:8393:23: error: too long token expansion drivers/net/wireless/ath/ath11k/mac.c:8393:23: error: too long token expansion Workaround the warnings by refactoring the code to a new function, which also reduces code duplication. And in the new function use max3() to make the code more readable. No functional changes, compile tested only. Acked-by:
-
Karthikeyan Periyasamy authored
This reverts commit 1f1f7d54. The commit caused bootup failure on QCN9274 hw2.0 platform. Incorrect hardcode DP irq offset overwrite the CE irq, which caused the driver to miss the mandatory bootup message from the firmware through the CE interrupt. This occurs because the CE count differs between platforms. The revert has no impact since the original change was based on an incorrect assumption. Log: ath12k_pci 0000:06:00.0: fw_version 0x1011001d fw_build_timestamp 2022-12-02 01:16 fw_build_id QC_IMAGE_VERSION_STRING=WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 ath12k_pci 0000:06:00.0: failed to receive control response completion, polling.. ath12k_pci 0000:06:00.0: Service connect timeout ath12k_pci 0000:06:00.0: failed to connect to HTT: -110 ath12k_pci 0000:06:00.0: failed to start core: -110 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by:
Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Acked-by:
-
Dmitry Antipov authored
In 'rt2x00queue_create_tx_descriptor()', there is no need to call 'ieee80211_get_rts_cts_rate()' while checking for RTS/CTS frame since this function returns NULL or pointer to internal bitrate table entry, and the return value is not actually used. Compile tested only. Found by Linux Verification Center (linuxtesting.org) with SVACE. Signed-off-by:
Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by:
-
Ping-Ke Shih authored
The new WiFi 7 chips change the design, so no need to disable/enable BB/RF when core_start(). Keep the same logic for existing chips. Signed-off-by:
Ping-Ke Shih <pkshih@realtek.com> Signed-off-by:
-
Ping-Ke Shih authored
To support MLO of WiFi 7, we should configure hardware as DBCC mode, and notify this status to firmware. Signed-off-by:
-
Ping-Ke Shih authored
Many existing MAC access functions are used by WiFi 6 chips only, so add suffix _ax to be clearer. Some are common and can be used by WiFi 7, so export this kind of functions. This patch doesn't change logic at all. Signed-off-by:
-
Ping-Ke Shih authored
Before accessing CMAC and DMAC registers, we should ensure they have been powered on, so add flag to determine the state. For old chips, we read registers and check corresponding bit, but it takes extra cost to read. Signed-off-by:
-
Ping-Ke Shih authored
The power on/off functions are to turn on hardware function blocks and to turn off them if we are going to stay in idle state. Signed-off-by:
-
Ping-Ke Shih authored
The XTAL SI is a serial interface to indirectly access registers of analog hardware circuit. Since WiFi 7 chips use different registers, add a ops to access them via common functions. This patch doesn't change logic for existing chips. Signed-off-by:
-
Ping-Ke Shih authored
With formatted string loaded from firmware file, we can use the formatted string ID and get corresponding string, and then use regular rtw89_debug() to show the message if debug mask of RFK is enabled. If the string ID doesn't present, fallback to print plain hexadecimal. Signed-off-by:
-
Ping-Ke Shih authored
RFK log events contains two types. One called RUN log is to reflect state during RFK is running, and it replies on formatted string loaded from firmware file, but print this type as plain hexadecimal only in this patch. The other is REPORT log that reflects the final result of a RFK, and each calibration has its own struct to carry many specific information. Signed-off-by:
-
Ping-Ke Shih authored
Trigger a RFK (RF calibration) in firmware by a H2C command, and in progress it reports log and a result finally by C2H events. Firstly, add prototype of the C2H event handlers to have a simple picture of framework. The callers who trigger H2C will wait until a C2H event is received, so we must process these C2H events in receiving process. Thus, mark this kind of C2H events as atomic. Also, timestamp is also useful for debugging, mark C2H events carrying RFK log as atomic as well. Signed-off-by:
-
Ping-Ke Shih authored
To debug RFK (RF calibration) in firmware, it sends log via firmware C2H events to driver with string format ID and four arguments. Load formatted string from firmware file, and the string ID can get back its string. Then, use regular print format to show the message. This firmware element layout looks like +============================================+ | elm ID | elm size | version | | +----------+----------+----------+-----------+ | | nr |rsvd |rfk_id|rsvd| +--------------------------------------------+ | offset[] (__le16 * nr) | | ... | +--------------------------------------------+ | formatted string with null termintor (*nr) | | ... | +============================================+ * a firmware file can contains more than one elements with this element ID named RTW89_FW_ELEMENT_ID_RFKLOG_FMT (19), because many RFK needs its own formatted strings, so add 'rfk_id' to know it belongs to which RFK. * the 'formatted string' just follow 'offset[]' without padding to align 32bits. Signed-off-by: -
Ping-Ke Shih authored
8922AE has more than one hardware version, and they use different BB MCU firmware, so occupy a byte from element priv[] to annotate version. Since there are more than one firmware and only matched version is adopted, return 1 to ignore not matched firmware. +===========================================+ | elm ID | elm size | version | | +----------+----------+----------+----------+ | | element_priv[] | +-------------------------------------------+ change to | v +===========================================+ | elm ID | elm size | version | | +----------+----------+----------+----------+ | | cv | element_rsvd[] | +-------------------------------------------+ Signed-off-by: -
Ping-Ke Shih authored
The TX power track tables are used to define compensation power reflected to thermal value. Currently, we have 16 (2 * 4 * 2) tables made by combinations of {negative/positive thermal value, 2GHz/2GHz-CCK/5GHz/6GHz, path A/B} Signed-off-by: -
David Lin authored
AP BSSID configuration is missing at AP start. Without this fix, FW returns STA interface MAC address after first init. When hostapd restarts, it gets MAC address from netdev before driver sets STA MAC to netdev again. Now MAC address between hostapd and net interface are different causes STA cannot connect to AP. After that MAC address of uap0 mlan0 become the same. And issue disappears after following hostapd restart (another issue is AP/STA MAC address become the same). This patch fixes the issue cleanly. Signed-off-by:
David Lin <yu-hao.lin@nxp.com> Fixes: 12190c5d ("mwifiex: add cfg80211 start_ap and stop_ap handlers") Cc: stable@vger.kernel.org Reviewed-by:
Francesco Dolcini <francesco.dolcini@toradex.com> Tested-by: Rafael Beims <rafael.beims@toradex.com> # Verdin iMX8MP/SD8997 SD Acked-by:
Brian Norris <briannorris@chromium.org> Signed-off-by:
-
David Lin authored
For SDIO IW416, due to a bug, FW may return ready before complete full initialization. Command timeout may occur at driver load after reboot. Workaround by adding 100ms delay at checking FW status. Signed-off-by:
-
- 14 Dec, 2023 5 commits
-
-
Randy Dunlap authored
Correct run-on sentences by changing "," to ";". Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Kalle Valo <kvalo@kernel.org> Cc: linux-wireless@vger.kernel.org Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Link: https://msgid.link/20231213054809.23475-1-rdunlap@infradead.orgSigned-off-by:
Johannes Berg <johannes.berg@intel.com>
-
Randy Dunlap authored
Correct a run-on sentence by changing "," to ";". Add a subject in one sentence. Signed-off-by:
-
Randy Dunlap authored
Correct spelling as reported by codespell. Correct run-on sentences and other grammar issues. Add hyphenation of adjectives. Correct some punctuation. Signed-off-by:
-
Randy Dunlap authored
Correct spelling and run-on sentences. Signed-off-by:
-
Johannes Berg authored
The build can become unreproducible if the list of files found by $(wildcard ...) differs. Sort the list to avoid this. Signed-off-by:
-
- 13 Dec, 2023 1 commit
-
-
Hancheng Yang authored
In the `ath_set_channel()` function, we only reset surveys that are not from the current channel. This leads to the accumulation of survey data for the current channel indefinitely. This may not be the most optimal approach, as we want the ACS to rely on the most recent survey. So reset the survey data for the current channel at the start of each scan. Signed-off-by:
Hancheng Yang <hyang@freebox.fr> Acked-by:
-
- 12 Dec, 2023 2 commits
-
-
Lingbo Kong authored
wifi: ath12k: fix the issue that the multicast/broadcast indicator is not read correctly for WCN7850 We observe some packets are discarded in ieee80211_rx_handlers_result function for WCN7850. This is because the way to get multicast/broadcast indicator with RX_MSDU_END_INFO5_DA_IS_MCBC & info5 is incorrect. It should use RX_MSDU_END_INFO13_MCAST_BCAST & info13 to get multicast/broadcast indicator. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by:
Lingbo Kong <quic_lingbok@quicinc.com> Signed-off-by:
-
Jeff Johnson authored
Transform the zero-length ath11k_htc_record::credit_report array into a proper flexible array. Since this is the only array in ath11k_htc_record, remove the unnecessary union. Signed-off-by:
-
