There is bug in DG2 where if the CCS contexts switches out while the RCS
is running it can cause memory corruption. To workaround this add an
atomic to a memory address with a value 1 and semaphore wait to the same
address for a value of 0. The GuC firmware is responsible for writing 0
to the memory address when it is safe for the context to switch out.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220415224025.3693037-6-umesh.nerlige.ramappa@intel.com

Enable GuC Wa to reset RCS/CCS before it goes into RC6.
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220415224025.3693037-5-umesh.nerlige.ramappa@intel.com

There are some workarounds for DG2 that are implemented in the GuC
firmware. However, the KMD is required to enable these by setting the
appropriate flag as GuC does not know what platform it is running on.
  Wa_16011759253
  Wa_14012630569
  Wa_14013746162
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
CC: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220415224025.3693037-4-umesh.nerlige.ramappa@intel.com

Initiating a reset when the command streamer is not idle or in the
middle of executing an MI_FORCE_WAKE can result in a hang. Multiple
command streamers can be part of a single reset domain, so resetting one
would mean resetting all command streamers in that domain.

To workaround this, before initiating a reset, ensure that all command
streamers within that reset domain are either IDLE or are not executing
a MI_FORCE_WAKE.

Enable GuC PRE_PARSER WA bit so that GuC follows the WA sequence when
initiating engine-resets.

For gt-resets, ensure that i915 applies the WA sequence.

Opens to address in future patches:
- The part of the WA to wait for pending forcewakes is also applicable
  to execlists backend.
- The WA also needs to be applied for gen11
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220415224025.3693037-3-umesh.nerlige.ramappa@intel.com

Prior to doing a reset, SW must ensure command streamer is stopped,
as a workaround, to eliminate a race condition in GPM flow.
Setting both the ring stop and prefetch disable bits, will cause the
command streamer to halt.
Signed-off-by: Tilak Tangudu <tilak.tangudu@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220415224025.3693037-2-umesh.nerlige.ramappa@intel.com

v2:
 * Jordan: Drop stepping/skew checking as suggested by John.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Tested-by: Jordan Justen <jordan.l.justen@intel.com>
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220331231737.315957-1-jordan.l.justen@intel.com

At present i915 does not fetch busyness information from GuC, resulting in
incorrect busyness values in fdinfo. Because engine information is coupled
with busyness in fdinfo, skip showing client engine information in fdinfo
with GuC submission till fetching busyness is supported in the i915 GuC
submission backend.

v2 (Daniele):
  Make commit title and description more precise
  Add FIXME with brief description at code change
  s/intel_guc_submission_is_used/intel_uc_uses_guc_submission/

v3 (Daniele):
  Drop FIXME in comment

Bug: https://gitlab.freedesktop.org/drm/intel/-/issues/5564
Fixes: 055634e4 ("drm/i915: Expose client engine utilisation via fdinfo")
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b614c2c61a954de06fbe2c3a7c70d3a91804407e.1649982207.git.ashutosh.dixit@intel.com

This will ensure we don't have false positives when we run
error injection tests.
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220412224852.21501-1-vinay.belgaumkar@intel.com

Newer platforms have DSS that aren't necessarily available for both
geometry and compute, two queries will need to exist. This introduces
the first, when passing a valid engine class and engine instance in the
flags returns a topology describing geometry.

Based on past discussion, we currently only support this new query item
on Xe_HP and beyond; earlier platforms do not need to worry about
geometry and compute pipelines having access to different topology and
should continue to use the existing topology query.

v2: fix white space errors
v3: change flags from hosting 2 8 bit numbers to holding a
i915_engine_class_instance struct
v4: add error if non rcs engine passed.
v5 (by MattR):
 - Improve kerneldoc and cross references to related structs/enums.
   (Daniel)
 - Clarify that geometry query is only supported on render engines
   (Francisco)
 - Clarify that the new query is only supported on Xe_HP+.
 - Fix checkpatch warnings.

Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Francisco Jerez <currojerez@riseup.net>
UMD (mesa): https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14143
Testcase: igt@i915_query@test-query-geometry-subslices
Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20220414192230.749771-4-matthew.d.roper@intel.com

Document the possible options for drm_i915_query_item.query_id with
links to the corresponding uapi structures.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20220414192230.749771-3-matthew.d.roper@intel.com

Convert the comments for  drm_i915_query_perf_config and
drm_i915_perf_oa_config to kerneldoc so that they will show up in the
generated documentation.  Also correct a couple places that referred to
query_id when they actually meant to refer to query_item.flags.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20220414192230.749771-2-matthew.d.roper@intel.com

This structure has a great comment describing the fields, but it's not
currently in kerneldoc form and does not show up in the generated
documentation.  Let's fix that and also clarify the description of what
"subslice" refers to on gen12 platforms and beyond and that "slice" is
no longer meaningful on Xe_HP and beyond.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20220414192230.749771-1-matthew.d.roper@intel.com

The latest GuC firmware drops the context descriptor pool in favour of
passing all creation data in the create H2G. It also greatly simplifies
the work queue and removes the process descriptor used for multi-LRC
submission. So, remove all mention of LRC and process descriptors and
update the registration code accordingly.

Unfortunately, the new API also removes the ability to set default
values for the scheduling policies at context registration time.
Instead, a follow up H2G must be sent. The individual scheduling
policy update H2G commands are also dropped in favour of a single KLV
based H2G. So, change the update wrappers accordingly and call this
during context registration..

Of course, this second H2G per registration might fail due to being
backed up. The registration code has a complicated state machine to
cope with the actual registration call failing. However, if that works
then there is no support for unwinding if a further call should fail.
Unwinding would require sending a H2G to de-register - but that can't
be done because the CTB is already backed up.

So instead, add a new flag to say whether the context has a pending
policy update. This is set if the policy H2G fails at registration
time. The submission code checks for this flag and retries the policy
update if set. If that call fails, the submission path early exists
with a retry error. This is something that is already supported for
other reasons.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220412225955.1802543-2-John.C.Harrison@Intel.com

When we are swapping out the local memory obj on flat-ccs capable platform,
we need to capture the ccs data too along with main meory and we need to
restore it when we are swapping in the content.

When lmem object is swapped into a smem obj, smem obj will
have the extra pages required to hold the ccs data corresponding to the
lmem main memory. So main memory of lmem will be copied into the initial
pages of the smem and then ccs data corresponding to the main memory
will be copied to the subsequent pages of smem. ccs data is 1/256 of
lmem size.

Swapin happens exactly in reverse order. First main memory of lmem is
restored from the smem's initial pages and the ccs data will be restored
from the subsequent pages of smem.

Extracting and restoring the CCS data is done through a special cmd called
XY_CTRL_SURF_COPY_BLT

v2: Fixing the ccs handling
v3: Handle the ccs data at same loop as main memory [Thomas]
v4: changes for emit_copy_ccs
v5: handle non-flat-ccs scenario
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220405150840.29351-10-ramalingam.c@intel.com

On Xe-HP and later devices, dedicated compression control state (CCS)
stored in local memory is used for each surface, to support the
3D and media compression formats.

The memory required for the CCS of the entire local memory is 1/256 of
the local memory size. So before the kernel boot, the required memory
is reserved for the CCS data and a secure register will be programmed
with the CCS base address

So when an object is allocated in local memory, dont need to explicitly
allocate the space for ccs data. But when the obj is evicted into the
smem, to hold the compression related data along with the obj extra space
is needed in smem. i.e obj_size + (obj_size/256).

Hence when a smem pages are allocated for an obj with lmem placement
possibility we create with the extra pages required for the ccs data for
the obj size.

v2:
  Used imperative wording [Thomas]
v3:
  Inflate the pages only when obj's placement is lmem only
v4:
  GEM_BUG_ON if the ttm->num_pages > obj page size [Thomas]
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
cc: Christian Koenig <christian.koenig@amd.com>
cc: Hellstrom Thomas <thomas.hellstrom@intel.com>
Reviewed-by: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220405150840.29351-9-ramalingam.c@intel.com

Extend the live migrate selftest, to verify the ccs surface clearing
during the Flat-CCS capable lmem obj clear.

v2:
  Look at right places for ccs data [Thomas]
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220405150840.29351-8-ramalingam.c@intel.com

Consider the possible round up happened at obj size alignment to
min_page_size during the obj allocation.
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220405150840.29351-7-ramalingam.c@intel.com

Xe-HP and latest devices support Flat CCS which reserved a portion of
the device memory to store compression metadata, during the clearing of
device memory buffer object we also need to clear the associated
CCS buffer.

XY_CTRL_SURF_COPY_BLT is a BLT cmd used for reading and writing the
ccs surface of a lmem memory. So on Flat-CCS capable platform we use
XY_CTRL_SURF_COPY_BLT  to clear the CCS meta data.

v2: Fixed issues with platform naming [Lucas]
v3: Rebased [Ram]
    Used the round_up funcs [Bob]
v4: Fixed ccs blk calculation [Ram]
    Added Kdoc on flat-ccs.
v5: GENMASK is used [Matt]
    mocs fix [Matt]
    Comments Fix [Matt]
    Flush address programming [Ram]
v6: FLUSH_DW is fixed
    Few coding style fix
v7: Adopting the XY_FAST_COLOR_BLT (Thomas]
v8: XY_CTRL_SURF_COPY_BLT for ccs clearing.
v9: emit_copy_ccs is used.
v10: ctrl_surf cmds are filled in caller itself. [Thomas]
     only one ctrl surf cmd is used as size of lmem is <=8M [Thomas]
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Signed-off-by: Ayaz A Siddiqui <ayaz.siddiqui@intel.com>
Reviewed-by: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220405150840.29351-6-ramalingam.c@intel.com

When emit_pte doesn't update any PTE with return value as 0, interpret
it as -EINVAL.

v2:
  Add missing goto [Thomas]
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220405150840.29351-5-ramalingam.c@intel.com

Move the static calculations out of the loops for copy and clear.

v2:
  Fix the loss of proper error code on emit_pte
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220405150840.29351-4-ramalingam.c@intel.com

Use faster XY_FAST_COLOR_BLT cmd on graphics version of 12 and more,
for clearing (Zero out) the pages of the newly allocated object.

XY_FAST_COLOR_BLT is faster than the older XY_COLOR_BLT.

v2:
  Typo fix at title [Thomas]
v3:
  XY_FAST_COLOR_BLT is used only for FLAT_CCS capable gen12+
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220405150840.29351-3-ramalingam.c@intel.com

To make it uniform across copy and clear, use the engine offset directly
to calculate the offset in the cmd forming for emit_clear.
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220405150840.29351-2-ramalingam.c@intel.com

Pull in TTM changes needed for DG2 CCS enabling from Ram.
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm-misc-next for 5.19:

UAPI Changes:

Cross-subsystem Changes:

Core Changes:
  - atomic: Add atomic_print_state to private objects
  - edid: Constify the EDID parsing API, rework of the API
  - dma-buf: Add dma_resv_replace_fences, dma_resv_get_singleton, make
    dma_resv_excl_fence private
  - format: Support monochrome formats
  - fbdev: fixes for cfb_imageblit and sys_imageblit, pagelist
    corruption fix
  - selftests: several small fixes
  - ttm: Rework bulk move handling

Driver Changes:
  - Switch all relevant drivers to drm_mode_copy or drm_mode_duplicate
  - bridge: conversions to devm_drm_of_get_bridge and panel_bridge,
    autosuspend for analogix_dp, audio support for it66121, DSI to DPI
    support for tc358767, PLL fixes and I2C support for icn6211
  - bridge_connector: Enable HPD if supported
  - etnaviv: fencing improvements
  - gma500: GEM and GTT improvements, connector handling fixes
  - komeda: switch to plane reset helper
  - mediatek: MIPI DSI improvements
  - omapdrm: GEM improvements
  - panel: DT bindings fixes for st7735r, few fixes for ssd130x, new
    panels: ltk035c5444t, B133UAN01, NV3052C
  - qxl: Allow to run on arm64
  - sysfb: Kconfig rework, support for VESA graphic mode selection
  - vc4: Add a tracepoint for CL submissions, HDMI YUV output,
    HDMI and clock improvements
  - virtio: Remove restriction of non-zero blob_flags,
  - vmwgfx: support for CursorMob and CursorBypass 4, various
    improvements and small fixes

[airlied: fixup conflict with newvision panel callbacks]
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220407085940.pnflvjojs4qw4b77@houat

Pull serial driver fix from Greg KH:
 "This is a single serial driver fix for a build issue that showed up
  due to changes that came in through the tty tree in 5.18-rc1 that were
  missed previously. It resolves a build error with the mpc52xx_uart
  driver.

  It has been in linux-next this week with no reported problems"

* tag 'tty-5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  tty: serial: mpc52xx_uart: make rx/tx hooks return unsigned, part II.

Pull staging driver fix from Greg KH:
 "Here is a single staging driver fix for 5.18-rc2 that resolves an
  endian issue for the r8188eu driver. It has been in linux-next all
  this week with no reported problems"

* tag 'staging-5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: r8188eu: Fix PPPoE tag insertion on little endian systems

Merge tag 'driver-core-5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core updates from Greg KH:
 "Here are two small driver core changes for 5.18-rc2.

  They are the final bits in the removal of the default_attrs field in
  struct kobj_type. I had to wait until after 5.18-rc1 for all of the
  changes to do this came in through different development trees, and
  then one new user snuck in. So this series has two changes:

   - removal of the default_attrs field in the powerpc/pseries/vas code.

     The change has been acked by the PPC maintainers to come through
     this tree

   - removal of default_attrs from struct kobj_type now that all
     in-kernel users are removed.

     This cleans up the kobject code a little bit and removes some
     duplicated functionality that confused people (now there is only
     one way to do default groups)

  Both of these have been in linux-next for all of this week with no
  reported problems"

* tag 'driver-core-5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  kobject: kobj_type: remove default_attrs
  powerpc/pseries/vas: use default_groups in kobj_type

Pull char/misc driver fix from Greg KH:
 "A single driver fix. It resolves the build warning issue on 32bit
  systems in the habannalabs driver that came in during the 5.18-rc1
  merge cycle.

  It has been in linux-next for all this week with no reported problems"

* tag 'char-misc-5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  habanalabs: Fix test build failures

Pull powerpc fixes from Michael Ellerman:

 - Fix KVM "lost kick" race, where an attempt to pull a vcpu out of the
   guest could be lost (or delayed until the next guest exit).

 - Disable SCV (system call vectored) when PR KVM guests could be run.

 - Fix KVM PR guests using SCV, by disallowing AIL != 0 for KVM PR
   guests.

 - Add a new KVM CAP to indicate if AIL == 3 is supported.

 - Fix a regression when hotplugging a CPU to a memoryless/cpuless node.

 - Make virt_addr_valid() stricter for 64-bit Book3E & 32-bit, which
   fixes crashes seen due to hardened usercopy.

 - Revert a change to max_mapnr which broke HIGHMEM.

Thanks to Christophe Leroy, Fabiano Rosas, Kefeng Wang, Nicholas Piggin,
and Srikar Dronamraju.

* tag 'powerpc-5.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  Revert "powerpc: Set max_mapnr correctly"
  powerpc: Fix virt_addr_valid() for 64-bit Book3E & 32-bit
  KVM: PPC: Move kvmhv_on_pseries() into kvm_ppc.h
  powerpc/numa: Handle partially initialized numa nodes
  powerpc/64: Fix build failure with allyesconfig in book3s_64_entry.S
  KVM: PPC: Use KVM_CAP_PPC_AIL_MODE_3
  KVM: PPC: Book3S PR: Disallow AIL != 0
  KVM: PPC: Book3S PR: Disable SCV when AIL could be disabled
  KVM: PPC: Book3S HV P9: Fix "lost kick" race

Pull irq fixes from Thomas Gleixner:
 "A set of interrupt chip driver fixes:

   - A fix for a long standing bug in the ARM GICv3 redistributor
     polling which uses the wrong bit number to test.

   - Prevent translation of bogus ACPI table entries which map device
     interrupts into the IPI space on ARM GICs.

   - Don't write into the pending register of ARM GICV4 before the scan
     in hardware has completed.

   - A set of build and correctness fixes for the Qualcomm MPM driver"

* tag 'irq-urgent-2022-04-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/gic, gic-v3: Prevent GSI to SGI translations
  irqchip/gic-v3: Fix GICR_CTLR.RWP polling
  irqchip/gic-v4: Wait for GICR_VPENDBASER.Dirty to clear before descheduling
  irqchip/irq-qcom-mpm: fix return value check in qcom_mpm_init()
  irq/qcom-mpm: Fix build error without MAILBOX

Pull x86 fixes from Borislav Petkov:

 - Fix the MSI message data struct definition

 - Use local labels in the exception table macros to avoid symbol
   conflicts with clang LTO builds

 - A couple of fixes to objtool checking of the relatively newly added
   SLS and IBT code

 - Rename a local var in the WARN* macro machinery to prevent shadowing

* tag 'x86_urgent_for_v5.18_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/msi: Fix msi message data shadow struct
  x86/extable: Prefer local labels in .set directives
  x86,bpf: Avoid IBT objtool warning
  objtool: Fix SLS validation for kcov tail-call replacement
  objtool: Fix IBT tail-call detection
  x86/bug: Prevent shadowing in __WARN_FLAGS
  x86/mm/tlb: Revert retpoline avoidance approach

Pull perf fixes from Borislav Petkov:

 - A couple of fixes to cgroup-related handling of perf events

 - A couple of fixes to event encoding on Sapphire Rapids

 - Pass event caps of inherited events so that perf doesn't fail wrongly
   at fork()

 - Add support for a new Raptor Lake CPU

* tag 'perf_urgent_for_v5.18_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/core: Always set cpuctx cgrp when enable cgroup event
  perf/core: Fix perf_cgroup_switch()
  perf/core: Use perf_cgroup_info->active to check if cgroup is active
  perf/core: Don't pass task around when ctx sched in
  perf/x86/intel: Update the FRONTEND MSR mask on Sapphire Rapids
  perf/x86/intel: Don't extend the pseudo-encoding to GP counters
  perf/core: Inherit event_caps
  perf/x86/uncore: Add Raptor Lake uncore support
  perf/x86/msr: Add Raptor Lake CPU support
  perf/x86/cstate: Add Raptor Lake support
  perf/x86: Add Intel Raptor Lake support

Pull locking fixes from Borislav Petkov:

 - Allow the compiler to optimize away unused percpu accesses and change
   the local_lock_* macros back to inline functions

 - A couple of fixes to static call insn patching

* tag 'locking_urgent_for_v5.18_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  Revert "mm/page_alloc: mark pagesets as __maybe_unused"
  Revert "locking/local_lock: Make the empty local_lock_*() function a macro."
  x86/percpu: Remove volatile from arch_raw_cpu_ptr().
  static_call: Remove __DEFINE_STATIC_CALL macro
  static_call: Properly initialise DEFINE_STATIC_CALL_RET0()
  static_call: Don't make __static_call_return0 static
  x86,static_call: Fix __static_call_return0 for i386

Pull scheduler fixes from Borislav Petkov:

 - Use the correct static key checking primitive on the IRQ exit path

 - Two fixes for the new forceidle balancer

* tag 'sched_urgent_for_v5.18_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  entry: Fix compile error in dynamic_irqentry_exit_cond_resched()
  sched: Teach the forced-newidle balancer about CPU affinity limitation.
  sched/core: Fix forceidle balancing

Merge tag 'perf-tools-fixes-for-v5.18-2022-04-09' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull perf tools fixes from Arnaldo Carvalho de Melo:

 - Fix the clang command line option probing and remove some options to
   filter out, fixing the build with the latest clang versions

 - Fix 'perf bench' futex and epoll benchmarks to deal with machines
   with more than 1K CPUs

 - Fix 'perf test tsc' error message when not supported

 - Remap perf ring buffer if there is no space for event, fixing perf
   usage in 32-bit ChromeOS

 - Drop objdump stderr to avoid getting stuck waiting for stdout output
   in 'perf annotate'

 - Fix up garbled output by now showing unwind error messages when
   augmenting frame in best effort mode

 - Fix perf's libperf_print callback, use the va_args eprintf() variant

 - Sync vhost and arm64 cputype headers with the kernel sources

 - Fix 'perf report --mem-mode' with ARM SPE

 - Add missing external commands ('iiostat', etc) to 'perf --list-cmds'

* tag 'perf-tools-fixes-for-v5.18-2022-04-09' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  perf annotate: Drop objdump stderr to avoid getting stuck waiting for stdout output
  perf tools: Add external commands to list-cmds
  perf docs: Add perf-iostat link to manpages
  perf session: Remap buf if there is no space for event
  perf bench: Fix epoll bench to correct usage of affinity for machines with #CPUs > 1K
  perf bench: Fix futex bench to correct usage of affinity for machines with #CPUs > 1K
  perf tools: Fix perf's libperf_print callback
  perf: arm-spe: Fix perf report --mem-mode
  perf unwind: Don't show unwind error messages when augmenting frame pointer stack
  tools headers arm64: Sync arm64's cputype.h with the kernel sources
  perf test tsc: Fix error message when not supported
  perf build: Don't use -ffat-lto-objects in the python feature test when building with clang-13
  perf python: Fix probing for some clang command line options
  tools build: Filter out options and warnings not supported by clang
  tools build: Use $(shell ) instead of `` to get embedded libperl's ccopts
  tools include UAPI: Sync linux/vhost.h with the kernel sources

Pull cxl and nvdimm fixes from Dan Williams:

 - Fix a compile error in the nvdimm unit tests

 - Fix a shadowed variable warning in the CXL PCI driver

* tag 'cxl+nvdimm-for-5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  cxl/pci: Drop shadowed variable
  tools/testing/nvdimm: Fix security_init() symbol collision

Pull gpio fix from Bartosz Golaszewski:

 - fix a race condition with consumers accessing the fields of GPIO IRQ
   chips before they're fully initialized

* tag 'gpio-fixes-for-v5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpio: Restrict usage of GPIO chip irq members before initialization

Merge tag 'irqchip-fixes-5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent

Pull irqchip fixes from Marc Zyngier:

 - Fix GICv3 polling for RWP in redistributors

 - Reject ACPI attempts to use SGIs on GIC/GICv3

 - Fix unpredictible behaviour when making a VPE non-resident
   with GICv4

 - A couple of fixes for the newly merged qcom-mpm driver

Link: https://lore.kernel.org/lkml/20220409094229.267649-1-maz@kernel.org

If objdump writes to stderr it can block waiting for it to be read. As
perf doesn't read stderr then progress stops with perf waiting for
stdout output.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Truong <alexandre.truong@arm.com>
Cc: Dave Marchevsky <davemarchevsky@fb.com>
Cc: Denis Nikitin <denik@chromium.org>
Cc: German Gomez <german.gomez@arm.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Lexi Shao <shaolexi@huawei.com>
Cc: Li Huafei <lihuafei1@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin Liška <mliska@suse.cz>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Remi Bernon <rbernon@codeweavers.com>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Cc: William Cohen <wcohen@redhat.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lore.kernel.org/lkml/20220407230503.1265036-2-irogers@google.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>