- 10 Mar, 2016 5 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
Pull ext4 fix from Ted Ts'o: "This fixes a regression which crept in v4.5-rc5" * tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: iterate over buffer heads correctly in move_extent_per_page()
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm fixes from Dave Airlie: "A few imx fixes I missed from a couple of weeks ago, they still aren't that big and fix some regression and a fail to boot problem. Other than that, a couple of regression fixes for radeon/amdgpu, one regression fix for vmwgfx and one regression fix for tda998x" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: Revert "drm/radeon/pm: adjust display configuration after powerstate" drm/amdgpu/dp: add back special handling for NUTMEG drm/radeon/dp: add back special handling for NUTMEG drm/i2c: tda998x: Choose between atomic or non atomic dpms helper drm/vmwgfx: Add back ->detect() and ->fill_modes() drm/radeon: Fix error handling in radeon_flip_work_func. drm/amdgpu: Fix error handling in amdgpu_flip_work_func. drm/imx: Add missing DRM_FORMAT_RGB565 to ipu_plane_formats drm/imx: notify DRM core about CRTC vblank state gpu: ipu-v3: Reset IPU before activating IRQ gpu: ipu-v3: Do not bail out on missing optional port nodes
-
Linus Torvalds authored
Merge tag 'trace-fixes-v4.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fix from Steven Rostedt: "I previously sent a fix that prevents all trace events from being called if the current cpu is offline. But I forgot that in 3.18, we added lockdep checks to test RCU usage even when the event is disabled. Although there cannot be any bug when a cpu is going offline, we now get false warnings triggered by the added checks of the event being disabled. I removed the check from the tracepoint code itself, and added it to the condition section (which is "1" for 'no condition'). This way the online cpu check will get checked in all the right locations" * tag 'trace-fixes-v4.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Fix check for cpu online when event is disabled
-
Eryu Guan authored
In commit bcff2488 ("ext4: don't read blocks from disk after extents being swapped") bh is not updated correctly in the for loop and wrong data has been written to disk. generic/324 catches this on sub-page block size ext4. Fixes: bcff2488 ("ext4: don't read blocks from disk after extentsbeing swapped") Signed-off-by:
Eryu Guan <guaneryu@gmail.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu>
-
Linus Torvalds authored
Merge fixes from Andrew Morton: "13 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: dma-mapping: avoid oops when parameter cpu_addr is null mm/hugetlb: use EOPNOTSUPP in hugetlb sysctl handlers memremap: check pfn validity before passing to pfn_to_page() mm, thp: fix migration of PTE-mapped transparent huge pages dax: check return value of dax_radix_entry() ocfs2: fix return value from ocfs2_page_mkwrite() arm64: kasan: clear stale stack poison sched/kasan: remove stale KASAN poison after hotplug kasan: add functions to clear stack poison mm: fix mixed zone detection in devm_memremap_pages list: kill list_force_poison() mm: __delete_from_page_cache show Bad page if mapped mm/hugetlb: hugetlb_no_page: rate-limit warning message
-
- 09 Mar, 2016 17 commits
-
-
Zhen Lei authored
To keep consistent with kfree, which tolerate ptr is NULL. We do this because sometimes we may use goto statement, so that success and failure case can share parts of the code. But unfortunately, dma_free_coherent called with parameter cpu_addr is null will cause oops, such as showed below: Unable to handle kernel paging request at virtual address ffffffc020d3b2b8 pgd = ffffffc083a61000 [ffffffc020d3b2b8] *pgd=0000000000000000, *pud=0000000000000000 CPU: 4 PID: 1489 Comm: malloc_dma_1 Tainted: G O 4.1.12 #1 Hardware name: ARM64 (DT) PC is at __dma_free_coherent.isra.10+0x74/0xc8 LR is at __dma_free+0x9c/0xb0 Process malloc_dma_1 (pid: 1489, stack limit = 0xffffffc0837fc020) [...] Call trace: __dma_free_coherent.isra.10+0x74/0xc8 __dma_free+0x9c/0xb0 malloc_dma+0x104/0x158 [dma_alloc_coherent_mtmalloc] kthread+0xec/0xfc Signed-off-by:Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Jan Stancek authored
Replace ENOTSUPP with EOPNOTSUPP. If hugepages are not supported, this value is propagated to userspace. EOPNOTSUPP is part of uapi and is widely supported by libc libraries. It gives nicer message to user, rather than: # cat /proc/sys/vm/nr_hugepages cat: /proc/sys/vm/nr_hugepages: Unknown error 524 And also LTP's proc01 test was failing because this ret code (524) was unexpected: proc01 1 TFAIL : proc01.c:396: read failed: /proc/sys/vm/nr_hugepages: errno=???(524): Unknown error 524 proc01 2 TFAIL : proc01.c:396: read failed: /proc/sys/vm/nr_hugepages_mempolicy: errno=???(524): Unknown error 524 proc01 3 TFAIL : proc01.c:396: read failed: /proc/sys/vm/nr_overcommit_hugepages: errno=???(524): Unknown error 524 Signed-off-by:
Jan Stancek <jstancek@redhat.com> Acked-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Acked-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by:
David Rientjes <rientjes@google.com> Acked-by:
Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by:
-
Ard Biesheuvel authored
In memremap's helper function try_ram_remap(), we dereference a struct page pointer that was derived from a PFN that is known to be covered by a 'System RAM' iomem region, and is thus assumed to be a 'valid' PFN, i.e., a PFN that has a struct page associated with it and is covered by the kernel direct mapping. However, the assumption that there is a 1:1 relation between the System RAM iomem region and the kernel direct mapping is not universally valid on all architectures, and on ARM and arm64, 'System RAM' may include regions for which pfn_valid() returns false. Generally speaking, both __va() and pfn_to_page() should only ever be called on PFNs/physical addresses for which pfn_valid() returns true, so add that check to try_ram_remap(). Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by:
-
Kirill A. Shutemov authored
We don't have native support of THP migration, so we have to split huge page into small pages in order to migrate it to different node. This includes PTE-mapped huge pages. I made mistake in refcounting patchset: we don't actually split PTE-mapped huge page in queue_pages_pte_range(), if we step on head page. The result is that the head page is queued for migration, but none of tail pages: putting head page on queue takes pin on the page and any subsequent attempts of split_huge_pages() would fail and we skip queuing tail pages. unmap_and_move_huge_page() will eventually split the huge pages, but only one of 512 pages would get migrated. Let's fix the situation. Fixes: 248db92d ("migrate_pages: try to split pages on queuing") Signed-off-by:
-
Ross Zwisler authored
dax_pfn_mkwrite() previously wasn't checking the return value of the call to dax_radix_entry(), which was a mistake. Instead, capture this return value and return the appropriate VM_FAULT_ value. Signed-off-by:
Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Matthew Wilcox <willy@linux.intel.com> Cc: Dave Chinner <david@fromorbit.com> Signed-off-by:
-
Jan Kara authored
ocfs2_page_mkwrite() could mistakenly return error code instead of mkwrite status value. Fix it. Signed-off-by:
Jan Kara <jack@suse.cz> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <joseph.qi@huawei.com> Signed-off-by:
-
Mark Rutland authored
Functions which the compiler has instrumented for KASAN place poison on the stack shadow upon entry and remove this poison prior to returning. In the case of cpuidle, CPUs exit the kernel a number of levels deep in C code. Any instrumented functions on this critical path will leave portions of the stack shadow poisoned. If CPUs lose context and return to the kernel via a cold path, we restore a prior context saved in __cpu_suspend_enter are forgotten, and we never remove the poison they placed in the stack shadow area by functions calls between this and the actual exit of the kernel. Thus, (depending on stackframe layout) subsequent calls to instrumented functions may hit this stale poison, resulting in (spurious) KASAN splats to the console. To avoid this, clear any stale poison from the idle thread for a CPU prior to bringing a CPU online. Signed-off-by:
Mark Rutland <mark.rutland@arm.com> Acked-by:
Catalin Marinas <catalin.marinas@arm.com> Reviewed-by:
Andrey Ryabinin <aryabinin@virtuozzo.com> Reviewed-by:
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Alexander Potapenko <glider@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Mark Rutland authored
Functions which the compiler has instrumented for KASAN place poison on the stack shadow upon entry and remove this poision prior to returning. In the case of CPU hotplug, CPUs exit the kernel a number of levels deep in C code. Any instrumented functions on this critical path will leave portions of the stack shadow poisoned. When a CPU is subsequently brought back into the kernel via a different path, depending on stackframe, layout calls to instrumented functions may hit this stale poison, resulting in (spurious) KASAN splats to the console. To avoid this, clear any stale poison from the idle thread for a CPU prior to bringing a CPU online. Signed-off-by:
Ingo Molnar <mingo@kernel.org> Cc: Alexander Potapenko <glider@google.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Mark Rutland authored
Functions which the compiler has instrumented for ASAN place poison on the stack shadow upon entry and remove this poison prior to returning. In some cases (e.g. hotplug and idle), CPUs may exit the kernel a number of levels deep in C code. If there are any instrumented functions on this critical path, these will leave portions of the idle thread stack shadow poisoned. If a CPU returns to the kernel via a different path (e.g. a cold entry), then depending on stack frame layout subsequent calls to instrumented functions may use regions of the stack with stale poison, resulting in (spurious) KASAN splats to the console. Contemporary GCCs always add stack shadow poisoning when ASAN is enabled, even when asked to not instrument a function [1], so we can't simply annotate functions on the critical path to avoid poisoning. Instead, this series explicitly removes any stale poison before it can be hit. In the common hotplug case we clear the entire stack shadow in common code, before a CPU is brought online. On architectures which perform a cold return as part of cpu idle may retain an architecture-specific amount of stack contents. To retain the poison for this retained context, the arch code must call the core KASAN code, passing a "watermark" stack pointer value beyond which shadow will be cleared. Architectures which don't perform a cold return as part of idle do not need any additional code. This patch (of 3): Functions which the compiler has instrumented for KASAN place poison on the stack shadow upon entry and remove this poision prior to returning. In some cases (e.g. hotplug and idle), CPUs may exit the kernel a number of levels deep in C code. If there are any instrumented functions on this critical path, these will leave portions of the stack shadow poisoned. If a CPU returns to the kernel via a different path (e.g. a cold entry), then depending on stack frame layout subsequent calls to instrumented functions may use regions of the stack with stale poison, resulting in (spurious) KASAN splats to the console. To avoid this, we must clear stale poison from the stack prior to instrumented functions being called. This patch adds functions to the KASAN core for removing poison from (portions of) a task's stack. These will be used by subsequent patches to avoid problems with hotplug and idle. Signed-off-by:
-
Dan Williams authored
The check for whether we overlap "System RAM" needs to be done at section granularity. For example a system with the following mapping: 100000000-37bffffff : System RAM 37c000000-837ffffff : Persistent Memory ...is unable to use devm_memremap_pages() as it would result in two zones colliding within a given section. Signed-off-by:Dan Williams <dan.j.williams@intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by:
Toshi Kani <toshi.kani@hpe.com> Signed-off-by:
-
Dan Williams authored
Given we have uninitialized list_heads being passed to list_add() it will always be the case that those uninitialized values randomly trigger the poison value. Especially since a list_add() operation will seed the stack with the poison value for later stack allocations to trip over. For example, see these two false positive reports: list_add attempted on force-poisoned entry WARNING: at lib/list_debug.c:34 [..] NIP [c00000000043c390] __list_add+0xb0/0x150 LR [c00000000043c38c] __list_add+0xac/0x150 Call Trace: __list_add+0xac/0x150 (unreliable) __down+0x4c/0xf8 down+0x68/0x70 xfs_buf_lock+0x4c/0x150 [xfs] list_add attempted on force-poisoned entry(0000000000000500), new->next == d0000000059ecdb0, new->prev == 0000000000000500 WARNING: at lib/list_debug.c:33 [..] NIP [c00000000042db78] __list_add+0xa8/0x140 LR [c00000000042db74] __list_add+0xa4/0x140 Call Trace: __list_add+0xa4/0x140 (unreliable) rwsem_down_read_failed+0x6c/0x1a0 down_read+0x58/0x60 xfs_log_commit_cil+0x7c/0x600 [xfs] Fixes: commit 5c2c2587 ("mm, dax, pmem: introduce {get|put}_dev_pagemap() for dax-gup") Signed-off-by:Eryu Guan <eguan@redhat.com> Tested-by:
-
Hugh Dickins authored
Commit e1534ae9 ("mm: differentiate page_mapped() from page_mapcount() for compound pages") changed the famous BUG_ON(page_mapped(page)) in __delete_from_page_cache() to VM_BUG_ON_PAGE(page_mapped(page)): which gives us more info when CONFIG_DEBUG_VM=y, but nothing at all when not. Although it has not usually been very helpul, being hit long after the error in question, we do need to know if it actually happens on users' systems; but reinstating a crash there is likely to be opposed :) In the non-debug case, pr_alert("BUG: Bad page cache") plus dump_page(), dump_stack(), add_taint() - I don't really believe LOCKDEP_NOW_UNRELIABLE, but that seems to be the standard procedure now. Move that, or the VM_BUG_ON_PAGE(), up before the deletion from tree: so that the unNULLified page->mapping gives a little more information. If the inode is being evicted (rather than truncated), it won't have any vmas left, so it's safe(ish) to assume that the raised mapcount is erroneous, and we can discount it from page_count to avoid leaking the page (I'm less worried by leaking the occasional 4kB, than losing a potential 2MB page with each 4kB page leaked). Signed-off-by:
Hugh Dickins <hughd@google.com> Acked-by:
-
Geoffrey Thomas authored
The warning message "killed due to inadequate hugepage pool" simply indicates that SIGBUS was sent, not that the process was forcibly killed. If the process has a signal handler installed does not fix the problem, this message can rapidly spam the kernel log. On my amd64 dev machine that does not have hugepages configured, I can reproduce the repeated warnings easily by setting vm.nr_hugepages=2 (i.e., 4 megabytes of huge pages) and running something that sets a signal handler and forks, like #include <sys/mman.h> #include <signal.h> #include <stdlib.h> #include <unistd.h> sig_atomic_t counter = 10; void handler(int signal) { if (counter-- == 0) exit(0); } int main(void) { int status; char *addr = mmap(NULL, 4 * 1048576, PROT_READ | PROT_WRITE, MAP_PRIVATE | MAP_ANONYMOUS | MAP_HUGETLB, -1, 0); if (addr == MAP_FAILED) {perror("mmap"); return 1;} *addr = 'x'; switch (fork()) { case -1: perror("fork"); return 1; case 0: signal(SIGBUS, handler); *addr = 'x'; break; default: *addr = 'x'; wait(&status); if (WIFSIGNALED(status)) { psignal(WTERMSIG(status), "child"); } break; } } Signed-off-by:Geoffrey Thomas <geofft@ldpreload.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds authored
Pull PCI fix from Bjorn Helgaas: "Here's another fix for v4.5. It fixes an ARM regression in v4.0 that causes many boxes to crash on boot, including cns3xxx, dove, footbridge, iopl13xx, ip32x, iop33x, ixp4xx, ks8695, mv78xx0, orion5x, pxa, sa1100, etc. The change is in code that's only built for ARM and ARM64. Summary: Enumeration: Allow generic PCI domains without bridge "parent" pointer (Krzysztof Hałasa)" * tag 'pci-v4.5-fixes-5' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: Allow a NULL "parent" pointer in pci_bus_assign_domain_nr() -
Steven Rostedt (Red Hat) authored
Commit f3775549 ("tracepoints: Do not trace when cpu is offline") added a check to make sure that tracepoints only get called when the cpu is online, as it uses rcu_read_lock_sched() for protection. Commit 3a630178 ("tracing: generate RCU warnings even when tracepoints are disabled") added lockdep checks (including rcu checks) for events that are not enabled to catch possible RCU issues that would only be triggered if a trace event was enabled. Commit f3775549 only stopped the warnings when the trace event was enabled but did not prevent warnings if the trace event was called when disabled. To fix this, the cpu online check is moved to where the condition is added to the trace event. This will place the cpu online check in all places that it may be used now and in the future. Cc: stable@vger.kernel.org # v3.18+ Fixes: f3775549 ("tracepoints: Do not trace when cpu is offline") Fixes: 3a630178 ("tracing: generate RCU warnings even when tracepoints are disabled") Reported-by:
Sudeep Holla <sudeep.holla@arm.com> Tested-by:
Steven Rostedt <rostedt@goodmis.org>
-
git://git.pengutronix.de/git/pza/linuxDave Airlie authored
ipu-v3 probe and imx-drm crtc and plane fixes - Fix ipu probe if optional port nodes are not present in the device tree - Reset the ipu before initializing interrupts, not thereafter - Notify DRM core about the state of vblank interrupts - Add missing RGB565 format to the list of plate formats * tag 'imx-drm-fixes-2016-02-19' of git://git.pengutronix.de/git/pza/linux: drm/imx: Add missing DRM_FORMAT_RGB565 to ipu_plane_formats drm/imx: notify DRM core about CRTC vblank state gpu: ipu-v3: Reset IPU before activating IRQ gpu: ipu-v3: Do not bail out on missing optional port nodes
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
radeon and amdgpu fixes for 4.5. Three regression fixes and some fixups for the error handling in the vblank regression fixes from earlier. * 'drm-fixes-4.5' of git://people.freedesktop.org/~agd5f/linux: Revert "drm/radeon/pm: adjust display configuration after powerstate" drm/amdgpu/dp: add back special handling for NUTMEG drm/radeon/dp: add back special handling for NUTMEG drm/radeon: Fix error handling in radeon_flip_work_func. drm/amdgpu: Fix error handling in amdgpu_flip_work_func.
-
- 08 Mar, 2016 7 commits
-
-
Alex Deucher authored
This reverts commit 39d42750. This caused a regression on some older hardware. bug: https://bugzilla.kernel.org/show_bug.cgi?id=113891Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "It's always an ambivalent feeling to send a large pull request at the late stage like this, especially when most of patches came from me. Anyway, this is a collection of lots of small fixes that slipped from the previous pull request. All fixes are about ASoC, and the majority of changes are corrections of the wrong access types in ALSA ctl enum items. They are mostly harmless on 32bit architectures, but actually buggy on 64bit. So we addressed all these now in a shot. The rest are various small ASoC driver fixes. Among them, only two changes have been done to ASoC core, and both of them are trivial. The rest are all device-specific. So overall, they should be safe to apply" * tag 'sound-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (33 commits) ASoC: wm_adsp: Fix enum ctl accesses in a wrong type ASoC: wm9081: Fix enum ctl accesses in a wrong type ASoC: wm8996: Fix enum ctl accesses in a wrong type ASoC: wm8994: Fix enum ctl accesses in a wrong type ASoC: wm8985: Fix enum ctl accesses in a wrong type ASoC: wm8983: Fix enum ctl accesses in a wrong type ASoC: wm8958: Fix enum ctl accesses in a wrong type ASoC: wm8904: Fix enum ctl accesses in a wrong type ASoC: wm8753: Fix enum ctl accesses in a wrong type ASoC: wl1273: Fix enum ctl accesses in a wrong type ASoC: tlv320dac33: Fix enum ctl accesses in a wrong type ASoC: max98095: Fix enum ctl accesses in a wrong type ASoC: max98088: Fix enum ctl accesses in a wrong type ASoC: ab8500: Fix enum ctl accesses in a wrong type ASoC: da732x: Fix enum ctl accesses in a wrong type ASoC: cs42l51: Fix enum ctl accesses in a wrong type ASoC: intel: mfld: Fix enum ctl accesses in a wrong type ASoC: omap: rx51: Fix enum ctl accesses in a wrong type ASoC: omap: n810: Fix enum ctl accesses in a wrong type ASoC: pxa: tosa: Fix enum ctl accesses in a wrong type ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/bp/bpLinus Torvalds authored
Pull EDAC fix from Borislav Petkov: "Last minute fix for sb_edac which fixes DIMM detection on certain Xeon Phi configurations: A single fix to the Xeon Phi section of sb_edac. The issue was introduced during this merge window" * tag 'edac_fix_for_4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: EDAC, sb_edac: Fix logic when computing DIMM sizes on Xeon Phi
-
Alex Deucher authored
When I fixed the dp rate selection in: 3b73b168cffd9c392584d3f665021fa2190f8612 drm/amdgpu: fix dp link rate selection (v2) I accidently dropped the special handling for NUTMEG DP bridge chips. They require a fixed link rate. Reviewed-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
Ken Wang <Qingqing.Wang@amd.com> Reviewed-by:
Harry Wentland <harry.wentland@amd.com> Signed-off-by:
-
Alex Deucher authored
When I fixed the dp rate selection in: 092c96a8 drm/radeon: fix dp link rate selection (v2) I accidently dropped the special handling for NUTMEG DP bridge chips. They require a fixed link rate. Reviewed-by:
Ken Moffat <zarniwhoop@ntlworld.com> Signed-off-by:
-
Jyri Sarha authored
Choose between atomic or non atomic connector dpms helper. If tda998x is connected to a drm driver that does not support atomic modeset calling drm_atomic_helper_connector_dpms() causes a crash when the connectors atomic state is not initialized. The patch implements a driver specific connector dpms helper that calls drm_atomic_helper_connector_dpms() if driver supports DRIVER_ATOMIC and otherwise it calls the legacy drm_helper_connector_dpms(). Fixes commit 9736e988 ("drm/i2c: tda998x: Add support for atomic modesetting"). Signed-off-by:
Jyri Sarha <jsarha@ti.com> Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
Thierry Reding authored
This partially reverts commit d56f57ac ("drm/gma500: Move to private save/restore hooks") which removed these lines by mistake. Reported-by:
Sebastian Herbszt <herbszt@gmx.de> Acked-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Thierry Reding <treding@nvidia.com> Tested-by:
Thomas Hellstrom <thellstrom@vmware.com> Tested-by:
-
- 07 Mar, 2016 11 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Fix ordering of WEXT netlink messages so we don't see a newlink after a dellink, from Johannes Berg. 2) Out of bounds access in minstrel_ht_set_best_prob_rage, from Konstantin Khlebnikov. 3) Paging buffer memory leak in iwlwifi, from Matti Gottlieb. 4) Wrong units used to set initial TCP rto from cached metrics, also from Konstantin Khlebnikov. 5) Fix stale IP options data in the SKB control block from leaking through layers of encapsulation, from Bernie Harris. 6) Zero padding len miscalculated in bnxt_en, from Michael Chan. 7) Only CHECKSUM_PARTIAL packets should be passed down through GSO, fix from Hannes Frederic Sowa. 8) Fix suspend/resume with JME networking devices, from Diego Violat and Guo-Fu Tseng. 9) Checksums not validated properly in bridge multicast support due to the placement of the SKB header pointers at the time of the check, fix from Álvaro Fernández Rojas. 10) Fix hang/tiemout with r8169 if a stats fetch is done while the device is runtime suspended. From Chun-Hao Lin. 11) The forwarding database netlink dump facilities don't track the state of the dump properly, resulting in skipped/missed entries. From Minoura Makoto. 12) Fix regression from a recent 3c59x bug fix, from Neil Horman. 13) Fix list corruption in bna driver, from Ivan Vecera. 14) Big endian machines crash on vlan add in bnx2x, fix from Michal Schmidt. 15) Ethtool RSS configuration not propagated properly in mlx5 driver, from Tariq Toukan. 16) Fix regression in PHY probing in stmmac driver, from Gabriel Fernandez. 17) Fix SKB tailroom calculation in igmp/mld code, from Benjamin Poirier. 18) A past change to skip empty routing headers in ipv6 extention header parsing accidently caused fragment headers to not be matched any longer. Fix from Florian Westphal. 19) eTSEC-106 erratum needs to be applied to more gianfar chips, from Atsushi Nemoto. 20) Fix netdev reference after free via workqueues in usb networking drivers, from Oliver Neukum and Bjørn Mork. 21) mdio->irq is now an array rather than a pointer to dynamic memory, but several drivers were still trying to free it :-/ Fixes from Colin Ian King. 22) act_ipt iptables action forgets to set the family field, thus LOG netfilter targets don't work with it. Fix from Phil Sutter. 23) SKB leak in ibmveth when skb_linearize() fails, from Thomas Falcon. 24) pskb_may_pull() cannot be called with interrupts disabled, fix code that tries to do this in vmxnet3 driver, from Neil Horman. 25) be2net driver leaks iomap'd memory on removal, fix from Douglas Miller. 26) Forgotton RTNL mutex unlock in ppp_create_interface() error paths, from Guillaume Nault. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (97 commits) ppp: release rtnl mutex when interface creation fails cdc_ncm: do not call usbnet_link_change from cdc_ncm_bind tcp: fix tcpi_segs_in after connection establishment net: hns: fix the bug about loopback jme: Fix device PM wakeup API usage jme: Do not enable NIC WoL functions on S0 udp6: fix UDP/IPv6 encap resubmit path be2net: Don't leak iomapped memory on removal. vmxnet3: avoid calling pskb_may_pull with interrupts disabled net: ethernet: Add missing MFD_SYSCON dependency on HAS_IOMEM ibmveth: check return of skb_linearize in ibmveth_start_xmit cdc_ncm: toggle altsetting to force reset before setup usbnet: cleanup after bind() in probe() mlxsw: pci: Correctly determine if descriptor queue is full mlxsw: spectrum: Always decrement bridge's ref count tipc: fix nullptr crash during subscription cancel net: eth: altera: do not free array priv->mdio->irq net/ethoc: do not free array priv->mdio->irq net: sched: fix act_ipt for LOG target asix: do not free array priv->mdio->irq ... -
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfsLinus Torvalds authored
Pull overlayfs fixes from Miklos Szeredi: "Overlayfs bug fixes. All marked as -stable material" * 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs: ovl: copy new uid/gid into overlayfs runtime inode ovl: ignore lower entries when checking purity of non-directory entries ovl: fix getcwd() failure after unsuccessful rmdir ovl: fix working on distributed fs as lower layer
-
Linus Torvalds authored
This reverts commit dbb17a21. It turns out that commit can cause problems for systems with multiple GPUs, and causes X to hang on at least a HP Pavilion dv7 with hybrid graphics. This got noticed originally in 4.4.4, where this patch had already gotten back-ported, but 4.5-rc7 was verified to have the same problem. Alexander Deucher says: "It looks like you have a muxed system so I suspect what's happening is that one of the display is being reported as connected for both the IGP and the dGPU and then the desktop environment gets confused or there some sort problem in the detect functions since the mux is not switched to the dGPU. I don't see an easy fix unless Dave has any ideas. I'd say just revert for now" Reported-by:
Jörg-Volker Peetz <jvpeetz@web.de> Acked-by:
-
Guillaume Nault authored
Add missing rtnl_unlock() in the error path of ppp_create_interface(). Fixes: 58a89eca ("ppp: fix lockdep splat in ppp_dev_uninit()") Signed-off-by:
Guillaume Nault <g.nault@alphalink.fr> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Bjørn Mork authored
usbnet_link_change will call schedule_work and should be avoided if bind is failing. Otherwise we will end up with scheduled work referring to a netdev which has gone away. Instead of making the call conditional, we can just defer it to usbnet_probe, using the driver_info flag made for this purpose. Fixes: 8a34b0ae ("usbnet: cdc_ncm: apply usbnet_link_change") Reported-by:
Andrey Konovalov <andreyknvl@gmail.com> Suggested-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
Eric Dumazet authored
If final packet (ACK) of 3WHS is lost, it appears we do not properly account the following incoming segment into tcpi_segs_in While we are at it, starts segs_in with one, to count the SYN packet. We do not yet count number of SYN we received for a request sock, we might add this someday. packetdrill script showing proper behavior after fix : // Tests tcpi_segs_in when 3rd packet (ACK) of 3WHS is lost 0.000 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 +0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 +0 bind(3, ..., ...) = 0 +0 listen(3, 1) = 0 +0 < S 0:0(0) win 32792 <mss 1000,sackOK,nop,nop> +0 > S. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK> +.020 < P. 1:1001(1000) ack 1 win 32792 +0 accept(3, ..., ...) = 4 +.000 %{ assert tcpi_segs_in == 2, 'tcpi_segs_in=%d' % tcpi_segs_in }% Fixes: 2efd055c ("tcp: add tcpi_segs_in and tcpi_segs_out to tcp_info") Signed-off-by:Eric Dumazet <edumazet@google.com> Signed-off-by:
-
yankejian authored
It will always be passed if the soc is tested the loopback cases. This patch will fix this bug. Signed-off-by:
Kejian Yan <yankejian@huawei.com> Signed-off-by:
-
Guo-Fu Tseng authored
According to Documentation/power/devices.txt The driver should not use device_set_wakeup_enable() which is the policy for user to decide. Using device_init_wakeup() to initialize dev->power.should_wakeup and dev->power.can_wakeup on driver initialization. And use device_may_wakeup() on suspend to decide if WoL function should be enabled on NIC. Reported-by:
Diego Viola <diego.viola@gmail.com> Signed-off-by:
Guo-Fu Tseng <cooldavid@cooldavid.org> Signed-off-by:
-
Guo-Fu Tseng authored
Otherwise it might be back on resume right after going to suspend in some hardware. Reported-by:
-
Krzysztof =?utf-8?Q?Ha=C5=82asa?= authored
pci_create_root_bus() passes a "parent" pointer to pci_bus_assign_domain_nr(). When CONFIG_PCI_DOMAINS_GENERIC is defined, pci_bus_assign_domain_nr() dereferences that pointer. Many callers of pci_create_root_bus() supply a NULL "parent" pointer, which leads to a NULL pointer dereference error. 7c674700 ("PCI: Move domain assignment from arm64 to generic code") moved the "parent" dereference from arm64 to generic code. Only arm64 used that code (because only arm64 defined CONFIG_PCI_DOMAINS_GENERIC), and it always supplied a valid "parent" pointer. Other arches supplied NULL "parent" pointers but didn't defined CONFIG_PCI_DOMAINS_GENERIC, so they used a no-op version of pci_bus_assign_domain_nr(). 8c7d1474 ("ARM/PCI: Move to generic PCI domains") defined CONFIG_PCI_DOMAINS_GENERIC on ARM, and many ARM platforms use pci_common_init(), which supplies a NULL "parent" pointer. These platforms (cns3xxx, dove, footbridge, iop13xx, etc.) crash with a NULL pointer dereference like this while probing PCI: Unable to handle kernel NULL pointer dereference at virtual address 000000a4 PC is at pci_bus_assign_domain_nr+0x10/0x84 LR is at pci_create_root_bus+0x48/0x2e4 Kernel panic - not syncing: Attempted to kill init! [bhelgaas: changelog, add "Reported:" and "Fixes:" tags] Reported: http://forum.doozan.com/read.php?2,17868,22070,quote=1 Fixes: 8c7d1474 ("ARM/PCI: Move to generic PCI domains") Fixes: 7c674700 ("PCI: Move domain assignment from arm64 to generic code") Signed-off-by:
Krzysztof Hałasa <khalasa@piap.pl> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Acked-by:
-
Bill Sommerfeld authored
IPv4 interprets a negative return value from a protocol handler as a request to redispatch to a new protocol. In contrast, IPv6 interprets a negative value as an error, and interprets a positive value as a request for redispatch. UDP for IPv6 was unaware of this difference. Change __udp6_lib_rcv() to return a positive value for redispatch. Note that the socket's encap_rcv hook still needs to return a negative value to request dispatch, and in the case of IPv6 packets, adjust IP6CB(skb)->nhoff to identify the byte containing the next protocol. Signed-off-by:
Bill Sommerfeld <wsommerfeld@google.com> Signed-off-by:
-
