- 19 Jul, 2022 12 commits
-
-
Maksym Glubokiy authored
Make the code look better. Signed-off-by:
Maksym Glubokiy <maksym.glubokiy@plvision.eu> Link: https://lore.kernel.org/r/20220715103806.7108-1-maksym.glubokiy@plvision.euSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Andrey Turkin authored
Make generic XDP processing attribute packets to their actual queues instead of queue #0. This improves AF_XDP performance considerably since softirq threads no longer fight over single AF_XDP socket spinlock. Signed-off-by:
Andrey Turkin <andrey.turkin@gmail.com> Link: https://lore.kernel.org/r/20220717022050.822766-2-andrey.turkin@gmail.comSigned-off-by:
-
Jakub Kicinski authored
Jiri Pirko says: ==================== devlink: prepare mlxsw and netdevsim for locked reload This is preparation patchset to be able to eventually make a switch and make reload cmd to take devlink->lock as the other commands do. This patchset is preparing 2 major users of devlink API - mlxsw and netdevsim. The sets of functions are similar, therefore taking care of both here. ==================== Link: https://lore.kernel.org/r/20220716110241.3390528-1-jiri@resnulli.usSigned-off-by:
-
Jiri Pirko authored
Remove locked versions of functions that are no longer used by anyone. Signed-off-by:
Jiri Pirko <jiri@nvidia.com> Signed-off-by:
-
Jiri Pirko authored
Prepare for devlink reload being called with devlink->lock held and convert the netdevsim driver to use unlocked devlink API during init and fini flows. Take devl_lock() in reload_down() and reload_up() ops in the meantime before reload cmd is converted to take the lock itself. Signed-off-by:
-
Jiri Pirko authored
Add unlocked variants of devlink_region_create/destroy() functions to be used in drivers called-in with devlink->lock held. Signed-off-by:
Moshe Shemesh <moshe@nvidia.com> Signed-off-by:
-
Jiri Pirko authored
Prepare for devlink reload being called with devlink->lock held and convert the mlxsw driver to use unlocked devlink API during init and fini flows. Take devl_lock() in reload_down() and reload_up() ops in the meantime before reload cmd is converted to take the lock itself. Signed-off-by:
Ido Schimmel <idosch@nvidia.com> Tested-by:
-
Jiri Pirko authored
Add unlocked variants of devlink_dpipe*() functions to be used in drivers called-in with devlink->lock held. Signed-off-by:
-
Jiri Pirko authored
Add unlocked variants of devlink_sb*() functions to be used in drivers called-in with devlink->lock held. Signed-off-by:
-
Jiri Pirko authored
Add unlocked variants of devlink_resource*() functions to be used in drivers called-in with devlink->lock held. Signed-off-by:
-
Jiri Pirko authored
Add unlocked variants of devl_trap*() functions to be used in drivers called-in with devlink->lock held. Signed-off-by:
-
Moshe Shemesh authored
Add a lock_class_key per devlink instance to avoid DEADLOCK warning by lockdep, while locking more than one devlink instance in driver code, for example in opening VFs flow. Kernel log: [ 101.433802] ============================================ [ 101.433803] WARNING: possible recursive locking detected [ 101.433810] 5.19.0-rc1+ #35 Not tainted [ 101.433812] -------------------------------------------- [ 101.433813] bash/892 is trying to acquire lock: [ 101.433815] ffff888127bfc2f8 (&devlink->lock){+.+.}-{3:3}, at: probe_one+0x3c/0x690 [mlx5_core] [ 101.433909] but task is already holding lock: [ 101.433910] ffff888118f4c2f8 (&devlink->lock){+.+.}-{3:3}, at: mlx5_core_sriov_configure+0x62/0x280 [mlx5_core] [ 101.433989] other info that might help us debug this: [ 101.433990] Possible unsafe locking scenario: [ 101.433991] CPU0 [ 101.433991] ---- [ 101.433992] lock(&devlink->lock); [ 101.433993] lock(&devlink->lock); [ 101.433995] *** DEADLOCK *** [ 101.433996] May be due to missing lock nesting notation [ 101.433996] 6 locks held by bash/892: [ 101.433998] #0: ffff88810eb50448 (sb_writers#3){.+.+}-{0:0}, at: ksys_write+0xf3/0x1d0 [ 101.434009] #1: ffff888114777c88 (&of->mutex){+.+.}-{3:3}, at: kernfs_fop_write_iter+0x20d/0x520 [ 101.434017] #2: ffff888102b58660 (kn->active#231){.+.+}-{0:0}, at: kernfs_fop_write_iter+0x230/0x520 [ 101.434023] #3: ffff888102d70198 (&dev->mutex){....}-{3:3}, at: sriov_numvfs_store+0x132/0x310 [ 101.434031] #4: ffff888118f4c2f8 (&devlink->lock){+.+.}-{3:3}, at: mlx5_core_sriov_configure+0x62/0x280 [mlx5_core] [ 101.434108] #5: ffff88812adce198 (&dev->mutex){....}-{3:3}, at: __device_attach+0x76/0x430 [ 101.434116] stack backtrace: [ 101.434118] CPU: 5 PID: 892 Comm: bash Not tainted 5.19.0-rc1+ #35 [ 101.434120] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 101.434130] Call Trace: [ 101.434133] <TASK> [ 101.434135] dump_stack_lvl+0x57/0x7d [ 101.434145] __lock_acquire.cold+0x1df/0x3e7 [ 101.434151] ? register_lock_class+0x1880/0x1880 [ 101.434157] lock_acquire+0x1c1/0x550 [ 101.434160] ? probe_one+0x3c/0x690 [mlx5_core] [ 101.434229] ? lockdep_hardirqs_on_prepare+0x400/0x400 [ 101.434232] ? __xa_alloc+0x1ed/0x2d0 [ 101.434236] ? ksys_write+0xf3/0x1d0 [ 101.434239] __mutex_lock+0x12c/0x14b0 [ 101.434243] ? probe_one+0x3c/0x690 [mlx5_core] [ 101.434312] ? probe_one+0x3c/0x690 [mlx5_core] [ 101.434380] ? devlink_alloc_ns+0x11b/0x910 [ 101.434385] ? mutex_lock_io_nested+0x1320/0x1320 [ 101.434388] ? lockdep_init_map_type+0x21a/0x7d0 [ 101.434391] ? lockdep_init_map_type+0x21a/0x7d0 [ 101.434393] ? __init_swait_queue_head+0x70/0xd0 [ 101.434397] probe_one+0x3c/0x690 [mlx5_core] [ 101.434467] pci_device_probe+0x1b4/0x480 [ 101.434471] really_probe+0x1e0/0xaa0 [ 101.434474] __driver_probe_device+0x219/0x480 [ 101.434478] driver_probe_device+0x49/0x130 [ 101.434481] __device_attach_driver+0x1b8/0x280 [ 101.434484] ? driver_allows_async_probing+0x140/0x140 [ 101.434487] bus_for_each_drv+0x123/0x1a0 [ 101.434489] ? bus_for_each_dev+0x1a0/0x1a0 [ 101.434491] ? lockdep_hardirqs_on_prepare+0x286/0x400 [ 101.434494] ? trace_hardirqs_on+0x2d/0x100 [ 101.434498] __device_attach+0x1a3/0x430 [ 101.434501] ? device_driver_attach+0x1e0/0x1e0 [ 101.434503] ? pci_bridge_d3_possible+0x1e0/0x1e0 [ 101.434506] ? pci_create_resource_files+0xeb/0x190 [ 101.434511] pci_bus_add_device+0x6c/0xa0 [ 101.434514] pci_iov_add_virtfn+0x9e4/0xe00 [ 101.434517] ? trace_hardirqs_on+0x2d/0x100 [ 101.434521] sriov_enable+0x64a/0xca0 [ 101.434524] ? pcibios_sriov_disable+0x10/0x10 [ 101.434528] mlx5_core_sriov_configure+0xab/0x280 [mlx5_core] [ 101.434602] sriov_numvfs_store+0x20a/0x310 [ 101.434605] ? sriov_totalvfs_show+0xc0/0xc0 [ 101.434608] ? sysfs_file_ops+0x170/0x170 [ 101.434611] ? sysfs_file_ops+0x117/0x170 [ 101.434614] ? sysfs_file_ops+0x170/0x170 [ 101.434616] kernfs_fop_write_iter+0x348/0x520 [ 101.434619] new_sync_write+0x2e5/0x520 [ 101.434621] ? new_sync_read+0x520/0x520 [ 101.434624] ? lock_acquire+0x1c1/0x550 [ 101.434626] ? lockdep_hardirqs_on_prepare+0x400/0x400 [ 101.434630] vfs_write+0x5cb/0x8d0 [ 101.434633] ksys_write+0xf3/0x1d0 [ 101.434635] ? __x64_sys_read+0xb0/0xb0 [ 101.434638] ? lockdep_hardirqs_on_prepare+0x286/0x400 [ 101.434640] ? syscall_enter_from_user_mode+0x1d/0x50 [ 101.434643] do_syscall_64+0x3d/0x90 [ 101.434647] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 101.434650] RIP: 0033:0x7f5ff536b2f7 [ 101.434658] Code: 0d 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24 [ 101.434661] RSP: 002b:00007ffd9ea85d58 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 101.434664] RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007f5ff536b2f7 [ 101.434666] RDX: 0000000000000002 RSI: 000055c4c279e230 RDI: 0000000000000001 [ 101.434668] RBP: 000055c4c279e230 R08: 000000000000000a R09: 0000000000000001 [ 101.434669] R10: 000055c4c283cbf0 R11: 0000000000000246 R12: 0000000000000002 [ 101.434670] R13: 00007f5ff543d500 R14: 0000000000000002 R15: 00007f5ff543d700 [ 101.434673] </TASK> Signed-off-by:
-
- 18 Jul, 2022 21 commits
-
-
Sieng-Piaw Liew authored
Use netif_napi_add_tx() for NAPI in Tx direction instead of the regular netif_napi_add() function. Signed-off-by:
Sieng-Piaw Liew <liew.s.piaw@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Arun Ramadoss authored
This patch removes the of_match_ptr() pointer when dereferencing the ksz_dt_ids which produce the unused variable warning. Reported-by:
kernel test robot <lkp@intel.com> Suggested-by:
Arnd Bergmann <arnd@kernel.org> Signed-off-by:
Arun Ramadoss <arun.ramadoss@microchip.com> Reviewed-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
David S. Miller authored
Jakub Kicinski says: ==================== tls: rx: avoid skb_cow_data() TLS calls skb_cow_data() on the skb it received from strparser whenever it needs to hold onto the skb with the decrypted data. (The alternative being decrypting directly to a user space buffer in whic case the input skb doesn't get modified or used after.) TLS needs the decrypted skb: - almost always with TLS 1.3 (unless the new NoPad is enabled); - when user space buffer is too small to fit the record; - when BPF sockmap is enabled. Most of the time the skb we get out of strparser is a clone of a 64kB data unit coalsced by GRO. To make things worse skb_cow_data() tries to output a linear skb and allocates it with GFP_ATOMIC. This occasionally fails even under moderate memory pressure. This patch set rejigs the TLS Rx so that we don't expect decryption in place. The decryption handlers return an skb which may or may not be the skb from strparser. For TLS 1.3 this results in a 20-30% performance improvement without NoPad enabled. v2: rebase after 3d8c51b2 ("net/tls: Check for errors in tls_device_init") ==================== Signed-off-by:
-
Jakub Kicinski authored
We currently CoW Rx skbs whenever we can't decrypt to a user space buffer. The skbs can be enormous (64kB) and CoW does a linear alloc which has a strong chance of failing under memory pressure. Or even without, skb_cow_data() assumes GFP_ATOMIC. Allocate a new frag'd skb and decrypt into it. We finally take advantage of the decrypted skb getting returned via darg. Signed-off-by:
-
Jakub Kicinski authored
The "zero-copy" path in SW TLS will engage either for no skbs or for all but last. If the recvmsg parameters are right and the socket can do ZC we'll ZC until the iterator can't fit a full record at which point we'll decrypt one more record and copy over the necessary bits to fill up the request. The only reason we hold onto the ZC skbs which went thru the async path until the end of recvmsg() is to count bytes. We need an accurate count of zc'ed bytes so that we can calculate how much of the non-zc'd data to copy. To allow freeing input skbs on the ZC path count only how much of the list we'll need to consume. Signed-off-by:
-
Jakub Kicinski authored
Async crypto currently benefits from the fact that we decrypt in place. When we allow input and output to be different skbs we will have to hang onto the input while we move to the next record. Clone the inputs and keep them on a list. Signed-off-by:
-
Jakub Kicinski authored
Async crypto TLS Rx currently waits for crypto to be done in order to strip the TLS header and tailer. Simplify the code by moving the pointers immediately, since only TLS 1.2 is supported here there is no message padding. This simplifies the decryption into a new skb in the next patch as we don't have to worry about input vs output skb in the decrypt_done() handler any more. Signed-off-by:
-
Jakub Kicinski authored
Instead of using ctx->recv_pkt after decryption read the skb from darg.skb. This moves the decision of what the "output skb" is to the decrypt handlers. For now after decrypt handler returns successfully ctx->recv_pkt is simply moved to darg.skb, but it will change soon. Note that tls_decrypt_sg() cannot clear the ctx->recv_pkt because it gets called to re-encrypt (i.e. by the device offload). So we need an awkward temporary if() in tls_rx_one_record(). Signed-off-by:
-
Jakub Kicinski authored
Callers always pass ctx->recv_pkt into decrypt_skb_update(), and it propagates it to its callees. This may give someone the false impression that those functions can accept any valid skb containing a TLS record. That's not the case, the record sequence number is read from the context, and they can only take the next record coming out of the strp. Let the functions get the skb from the context instead of passing it in. This will also make it cleaner to return a different skb than ctx->recv_pkt as the decrypted one later on. Since we're touching the definition of decrypt_skb_update() use this as an opportunity to rename it. Signed-off-by:
-
Jakub Kicinski authored
I already forgot to transform darg from input to output semantics once on the NIC inline crypto fastpath. To avoid this happening again create a device equivalent of decrypt_internal(). A function responsible for decryption and transforming darg. While at it rename decrypt_internal() to a hopefully slightly more meaningful name. Signed-off-by:
-
Jakub Kicinski authored
We no longer allow a decrypted skb to remain linked to ctx->recv_pkt. Anything on the list is decrypted, anything on ctx->recv_pkt needs to be decrypted. Signed-off-by:
-
Jakub Kicinski authored
Detach the skb from ctx->recv_pkt after decryption is done, even if we can't consume it. Signed-off-by:
-
Jakub Kicinski authored
I thought that having the skb either always on the ctx->rx_list or ctx->recv_pkt will simplify the handling, as we would not have to remember to flip it from one to the other on exit paths. This became a little harder to justify with the fix for BPF sockmaps. Subsequent changes will make the situation even worse. Queue the skbs only when really needed. Signed-off-by:
-
Jakub Kicinski authored
recvmsg() in TLS gets data from the skb list (rx_list) or fresh skbs we read from TCP via strparser. The former holds skbs which were already decrypted for peek or decrypted and partially consumed. tls_wait_data() only notices appearance of fresh skbs coming out of TCP (or psock). It is possible, if there is a concurrent call to peek() and recv() that the peek() will move the data from input to rx_list without recv() noticing. recv() will then read data out of order or never wake up. This is not a practical use case/concern, but it makes the self tests less reliable. This patch solves the problem by allowing only one reader in. Because having multiple processes calling read()/peek() is not normal avoid adding a lock and try to fast-path the single reader case. Signed-off-by:
-
David S. Miller authored
Wen Gu says: ==================== net/smc: Introduce virtually contiguous buffers for SMC-R On long-running enterprise production servers, high-order contiguous memory pages are usually very rare and in most cases we can only get fragmented pages. When replacing TCP with SMC-R in such production scenarios, attempting to allocate high-order physically contiguous sndbufs and RMBs may result in frequent memory compaction, which will cause unexpected hung issue and further stability risks. So this patch set is aimed to allow SMC-R link group to use virtually contiguous sndbufs and RMBs to avoid potential issues mentioned above. Whether to use physically or virtually contiguous buffers can be set by sysctl smcr_buf_type. Note that using virtually contiguous buffers will bring an acceptable performance regression, which can be mainly divided into two parts: 1) regression in data path, which is brought by additional address translation of sndbuf by RNIC in Tx. But in general, translating address through MTT is fast. According to qperf test, this part regression is basically less than 10% in latency and bandwidth. (see patch 5/6 for details) 2) regression in buffer initialization and destruction path, which is brought by additional MR operations of sndbufs. But thanks to link group buffer reuse mechanism, the impact of this kind of regression decreases as times of buffer reuse increases. Patch set overview: - Patch 1/6 and 2/6 mainly about simplifying and optimizing DMA sync operation, which will reduce overhead on the data path, especially when using virtually contiguous buffers; - Patch 3/6 and 4/6 introduce a sysctl smcr_buf_type to set the type of buffers in new created link group; - Patch 5/6 allows SMC-R to use virtually contiguous sndbufs and RMBs, including buffer creation, destruction, MR operation and access; - patch 6/6 extends netlink attribute for buffer type of SMC-R link group; v1->v2: - Patch 5/6 fixes build issue on 32bit; - Patch 3/6 adds description of new sysctl in smc-sysctl.rst; ==================== Signed-off-by: -
Wen Gu authored
Extend SMC-R link group netlink attribute SMC_GEN_LGR_SMCR. Introduce SMC_NLA_LGR_R_BUF_TYPE to show the buffer type of SMC-R link group. Signed-off-by:
Wen Gu <guwen@linux.alibaba.com> Signed-off-by:
-
Wen Gu authored
On long-running enterprise production servers, high-order contiguous memory pages are usually very rare and in most cases we can only get fragmented pages. When replacing TCP with SMC-R in such production scenarios, attempting to allocate high-order physically contiguous sndbufs and RMBs may result in frequent memory compaction, which will cause unexpected hung issue and further stability risks. So this patch is aimed to allow SMC-R link group to use virtually contiguous sndbufs and RMBs to avoid potential issues mentioned above. Whether to use physically or virtually contiguous buffers can be set by sysctl smcr_buf_type. Note that using virtually contiguous buffers will bring an acceptable performance regression, which can be mainly divided into two parts: 1) regression in data path, which is brought by additional address translation of sndbuf by RNIC in Tx. But in general, translating address through MTT is fast. Taking 256KB sndbuf and RMB as an example, the comparisons in qperf latency and bandwidth test with physically and virtually contiguous buffers are as follows: - client: smc_run taskset -c <cpu> qperf <server> -oo msg_size:1:64K:*2\ -t 5 -vu tcp_{bw|lat} - server: smc_run taskset -c <cpu> qperf [latency] msgsize tcp smcr smcr-use-virt-buf 1 11.17 us 7.56 us 7.51 us (-0.67%) 2 10.65 us 7.74 us 7.56 us (-2.31%) 4 11.11 us 7.52 us 7.59 us ( 0.84%) 8 10.83 us 7.55 us 7.51 us (-0.48%) 16 11.21 us 7.46 us 7.51 us ( 0.71%) 32 10.65 us 7.53 us 7.58 us ( 0.61%) 64 10.95 us 7.74 us 7.80 us ( 0.76%) 128 11.14 us 7.83 us 7.87 us ( 0.47%) 256 10.97 us 7.94 us 7.92 us (-0.28%) 512 11.23 us 7.94 us 8.20 us ( 3.25%) 1024 11.60 us 8.12 us 8.20 us ( 0.96%) 2048 14.04 us 8.30 us 8.51 us ( 2.49%) 4096 16.88 us 9.13 us 9.07 us (-0.64%) 8192 22.50 us 10.56 us 11.22 us ( 6.26%) 16384 28.99 us 12.88 us 13.83 us ( 7.37%) 32768 40.13 us 16.76 us 16.95 us ( 1.16%) 65536 68.70 us 24.68 us 24.85 us ( 0.68%) [bandwidth] msgsize tcp smcr smcr-use-virt-buf 1 1.65 MB/s 1.59 MB/s 1.53 MB/s (-3.88%) 2 3.32 MB/s 3.17 MB/s 3.08 MB/s (-2.67%) 4 6.66 MB/s 6.33 MB/s 6.09 MB/s (-3.85%) 8 13.67 MB/s 13.45 MB/s 11.97 MB/s (-10.99%) 16 25.36 MB/s 27.15 MB/s 24.16 MB/s (-11.01%) 32 48.22 MB/s 54.24 MB/s 49.41 MB/s (-8.89%) 64 106.79 MB/s 107.32 MB/s 99.05 MB/s (-7.71%) 128 210.21 MB/s 202.46 MB/s 201.02 MB/s (-0.71%) 256 400.81 MB/s 416.81 MB/s 393.52 MB/s (-5.59%) 512 746.49 MB/s 834.12 MB/s 809.99 MB/s (-2.89%) 1024 1292.33 MB/s 1641.96 MB/s 1571.82 MB/s (-4.27%) 2048 2007.64 MB/s 2760.44 MB/s 2717.68 MB/s (-1.55%) 4096 2665.17 MB/s 4157.44 MB/s 4070.76 MB/s (-2.09%) 8192 3159.72 MB/s 4361.57 MB/s 4270.65 MB/s (-2.08%) 16384 4186.70 MB/s 4574.13 MB/s 4501.17 MB/s (-1.60%) 32768 4093.21 MB/s 4487.42 MB/s 4322.43 MB/s (-3.68%) 65536 4057.14 MB/s 4735.61 MB/s 4555.17 MB/s (-3.81%) 2) regression in buffer initialization and destruction path, which is brought by additional MR operations of sndbufs. But thanks to link group buffer reuse mechanism, the impact of this kind of regression decreases as times of buffer reuse increases. Taking 256KB sndbuf and RMB as an example, latency of some key SMC-R buffer-related function obtained by bpftrace are as follows: Function Phys-bufs Virt-bufs smcr_new_buf_create() 67154 ns 79164 ns smc_ib_buf_map_sg() 525 ns 928 ns smc_ib_get_memory_region() 162294 ns 161191 ns smc_wr_reg_send() 9957 ns 9635 ns smc_ib_put_memory_region() 203548 ns 198374 ns smc_ib_buf_unmap_sg() 508 ns 1158 ns ------------ Test environment notes: 1. Above tests run on 2 VMs within the same Host. 2. The NIC is ConnectX-4Lx, using SRIOV and passing through 2 VFs to the each VM respectively. 3. VMs' vCPUs are binded to different physical CPUs, and the binded physical CPUs are isolated by `isolcpus=xxx` cmdline. 4. NICs' queue number are set to 1. Signed-off-by: -
Wen Gu authored
This patch introduces a new SMC-R specific element buf_type in struct smc_link_group, for recording the value of sysctl smcr_buf_type when link group is created. New created link group will create and reuse buffers of the type specified by buf_type. Signed-off-by:
-
Wen Gu authored
This patch introduces the sysctl smcr_buf_type for setting the type of SMC-R sndbufs and RMBs. Valid values includes: - SMCR_PHYS_CONT_BUFS, which means use physically contiguous buffers for better performance and is the default value. - SMCR_VIRT_CONT_BUFS, which means use virtually contiguous buffers in case of physically contiguous memory is scarce. - SMCR_MIXED_BUFS, which means first try to use physically contiguous buffers. If not available, then use virtually contiguous buffers. Signed-off-by:
-
Guangguan Wang authored
Some CPU, such as Xeon, can guarantee DMA cache coherency. So it is no need to use dma sync APIs to flush cache on such CPUs. In order to avoid calling dma sync APIs on the IO path, use the dma_need_sync to check whether smc_buf_desc needs dma sync when creating smc_buf_desc. Signed-off-by:
Guangguan Wang <guangguan.wang@linux.alibaba.com> Signed-off-by:
-
Guangguan Wang authored
smc_ib_sync_sg_for_cpu/device are the ops used for dma memory cache consistency. Smc sndbufs are dma buffers, where CPU writes data to it and PCIE device reads data from it. So for sndbufs, smc_ib_sync_sg_for_device is needed and smc_ib_sync_sg_for_cpu is redundant as PCIE device will not write the buffers. Smc rmbs are dma buffers, where PCIE device write data to it and CPU read data from it. So for rmbs, smc_ib_sync_sg_for_cpu is needed and smc_ib_sync_sg_for_device is redundant as CPU will not write the buffers. Signed-off-by:
-
- 16 Jul, 2022 4 commits
-
-
Jakub Kicinski authored
Jaehee Park says: ==================== net: ipv4/ipv6: new option to accept garp/untracked na only if in-network The first patch adds an option to learn a neighbor from garp only if the source ip is in the same subnet as an address configured on the interface that received the garp message. The option has been added to arp_accept in ipv4. The same feature has been added to ndisc (patch 2). For ipv6, the subnet filtering knob is an extension of the accept_untracked_na option introduced in these patches: https://lore.kernel.org/all/642672cb-8b11-c78f-8975-f287ece9e89e@gmail.com/t/ https://lore.kernel.org/netdev/20220530101414.65439-1-aajith@arista.com/T/ The third patch contains selftests for testing the different options for accepting arp and neighbor advertisements. ==================== Link: https://lore.kernel.org/r/cover.1657755188.git.jhpark1013@gmail.comSigned-off-by:
-
Jaehee Park authored
ipv4 arp_accept has a new option '2' to create new neighbor entries only if the src ip is in the same subnet as an address configured on the interface that received the garp message. This selftest tests all options in arp_accept. ipv6 has a sysctl endpoint, accept_untracked_na, that defines the behavior for accepting untracked neighbor advertisements. A new option similar to that of arp_accept for learning only from the same subnet is added to accept_untracked_na. This selftest tests this new feature. Signed-off-by:
Jaehee Park <jhpark1013@gmail.com> Suggested-by:
Roopa Prabhu <roopa@nvidia.com> Signed-off-by:
-
Jaehee Park authored
This patch adds a third knob, '2', which extends the accept_untracked_na option to learn a neighbor only if the src ip is in the same subnet as an address configured on the interface that received the neighbor advertisement. This is similar to the arp_accept configuration for ipv4. Signed-off-by:
-
Jaehee Park authored
In many deployments, we want the option to not learn a neighbor from garp if the src ip is not in the same subnet as an address configured on the interface that received the garp message. net.ipv4.arp_accept sysctl is currently used to control creation of a neigh from a received garp packet. This patch adds a new option '2' to net.ipv4.arp_accept which extends option '1' by including the subnet check. Signed-off-by:
-
- 15 Jul, 2022 3 commits
-
-
Sunil Goutham authored
When number of LMACs active on a CGX/RPM are 3, then current NIX link credit config based on per lmac fifo length which inturn is calculated as 'lmac_fifo_len = total_fifo_len / 3', is incorrect. In HW one of the LMAC gets half of the FIFO and rest gets 1/4th. Signed-off-by:
Nithin Dabilpuram <ndabilpuram@marvell.com> Signed-off-by:
Sunil Goutham <sgoutham@marvell.com> Signed-off-by:
Geetha Sowjanya <gakula@marvell.com> Signed-off-by:
-
Ratheesh Kannoth authored
Fixes smatch static tool warning reported by smatch tool. rvu_npc_hash.c:1232 rvu_npc_exact_del_table_entry_by_id() error: uninitialized symbol 'drop_mcam_idx'. rvu_npc_hash.c:1312 rvu_npc_exact_add_table_entry() error: uninitialized symbol 'drop_mcam_idx'. rvu_npc_hash.c:1391 rvu_npc_exact_update_table_entry() error: uninitialized symbol 'hash_index'. rvu_npc_hash.c:1428 rvu_npc_exact_promisc_disable() error: uninitialized symbol 'drop_mcam_idx'. rvu_npc_hash.c:1473 rvu_npc_exact_promisc_enable() error: uninitialized symbol 'drop_mcam_idx'. otx2_dmac_flt.c:191 otx2_dmacflt_update() error: 'rsp' dereferencing possible ERR_PTR() otx2_dmac_flt.c:60 otx2_dmacflt_add_pfmac() error: 'rsp' dereferencing possible ERR_PTR() Signed-off-by:
Ratheesh Kannoth <rkannoth@marvell.com> Signed-off-by:
-
Christian Marangi authored
Move qca8k driver to qca dir in preparation for code split and introduction of ipq4019 switch based on qca8k. Signed-off-by:
Christian Marangi <ansuelsmth@gmail.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
