- 19 Mar, 2020 3 commits
-
-
git://people.freedesktop.org/~thomash/linuxDave Airlie authored
- Disable DMA when using SEV encryption - An -RT fix - Code cleanups Signed-off-by:
Dave Airlie <airlied@redhat.com> From: "Thomas Hellstrom (VMware)" <thomas_os@shipmail.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200316105212.26504-1-thomas_os@shipmail.org
-
git://anongit.freedesktop.org/drm/drm-intelDave Airlie authored
UAPI Changes: On i915 we have a new UAPI to allow userspace to specify CS ring buffer size on construction (I915_CONTEXT_PARAM_RINGSIZE) and also new sysfs entries exposing various engine properties GVT Changes: VFIO edid getting expanded to all platforms and a big cleanup around attr group, unused vblank complete, kvmgt, Intel engine and dev_priv usages. i915 Changes: - new UAPI to allow userspace to specify CS ring buffer size on construction (I915_CONTEXT_PARAM_RINGSIZE) - (Chris) - New sysfs entries exposing various engine properties (Chris) - Tiger Lake is out of require_force_probe protection (Jose) - Changes in many places around active requests, reset and heartbeat (Chris) - Stop assigning drm-dev_private pointer (Jani) - Many code refactor in many places, including intel_modeset_init, increasing use of intel_uncore_*, vgpu, and gvt stuff (Jani) - Fixes around display pipe iterators (Anshuman) - Tigerlake enabling work (Matt Ropper, Matt Atwood, Ville, Lucas, Daniele, Jose, Anusha, Vivek, Swathi, Caz. Kai) - Code clean-up like reducing use of drm/i915_drv.h, removing unused registers, removing garbage warns, and some other code polishing (Jani, Lucas, Ville) - Selftests fixes, improvements and additions (Chris, Dan, Aditya, Matt Auld) - Fix plane possible_crtcs bit mask (Anshuman) - Fixes and cleanup on GLK pre production identification and w/a (Ville) - Fix display orientation on few cases (Hans, Ville) - dbuf clean-up and improvements for slice arrays handling (Ville) - Improvement around min cdclk calculation (Stanislav) - Fixes and refactor around display PLLs (Imre) - Other execlists and perf fixes (Chris) - Documentation fixes (Jani, Chris) - Fix build issue (Anshuman) - Many more fixes around the locking mechanisms (Chris) - Other fixes and debugability info around preemption (Chris, Tvrtko) - Add mechanism to submit a context WA on ring submission (Mika) - Clear all Eu/L3 resitual context (Prathap) - More changes around local memory (Abdiel, Matt, Chris) - Fix RPS (Chris) - DP MST fix (Lyude) - Display FBC fixes (Jose, RK) - debugfs cleanup (Tvrtko) - More convertion towards drm_debive based loggin (Wambui, Ram) - Avoid potential buffer overflow (Takashi) - Ice Lake and Elkhart Lake workarounds (Matt Roper) Signed-off-by:
-
git://anongit.freedesktop.org/tegra/linuxDave Airlie authored
drm/tegra: Changes for v5.7-rc1 This contains some minor cleanups, nothing too exciting. Signed-off-by:
-
- 16 Mar, 2020 1 commit
-
-
Gustavo A. R. Silva authored
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732 ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by:Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by:
Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by:
-
- 14 Mar, 2020 1 commit
-
-
Rodrigo Vivi authored
Signed-off-by:Rodrigo Vivi <rodrigo.vivi@intel.com>
-
- 13 Mar, 2020 10 commits
-
-
José Roberto de Souza authored
We have a few TGL machines in our CI and it is mostly green with failures in tests that will not impact future Linux installations. Also there is no warnings, errors, flickering or any visual defects while doing ordinary tasks like browsing and editing documents in a dual monitor setup. As a reminder i915.require_force_probe was created to protect future Linux installation's iso images that might contain a kernel from the enabling time of the new platform. Without this protection most of linux installation was recommending nomodeset option during installation that was getting stick there after installation. Reference: https://intel-gfx-ci.01.org/tree/drm-tip/fi-tgl-u.html Reference: https://intel-gfx-ci.01.org/tree/drm-tip/shard-tglb.html Cc: James Ausmus <james.ausmus@intel.com> Cc: Jani Saarinen <jani.saarinen@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by:
José Roberto de Souza <jose.souza@intel.com> Acked-by:
Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200218230822.66801-1-jose.souza@intel.com
-
Dmitry Osipenko authored
Driver fails to probe with -EPROBE_DEFER, which produces a bit noisy error message in KMSG during kernel's boot up. This happens because voltage regulators tend to be probed later than the DRM driver. Signed-off-by:
Dmitry Osipenko <digetx@gmail.com> Signed-off-by:
Thierry Reding <treding@nvidia.com>
-
Dmitry Osipenko authored
Driver fails to probe with -EPROBE_DEFER if display output isn't ready yet. This produces a bit noisy error message in KMSG during kernel's boot up on Tegra20 and Tegra30 because RGB output tends to be probed earlier than a corresponding voltage regulator driver. Signed-off-by:
-
Matt Roper authored
This workaround appears under two different numbers (and with somewhat confused stepping applicability on ICL). Ultimately it appears we should just implement this for all stepping of ICL and EHL. Note that this is identical to Wa_1407928979:tgl that already exists in our driver too...yet another number referencing the same actual workaround. Signed-off-by:
Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200311162300.1838847-7-matthew.d.roper@intel.comReviewed-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com>
-
Matt Roper authored
The register this workaround updates is a render engine register in the MCR range, so we should initialize this in rcs_engine_wa_init() rather than gt_wa_init(). Closes: https://gitlab.freedesktop.org/drm/intel/issues/1222 Fixes: 36204d80 ("drm/i915/icl: Wa_1406680159") Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by:
-
Matt Roper authored
v2: - Move to context workarounds. ROW_CHICKEN4 is part of the context image on gen11 (although it isn't on gen12). Signed-off-by:
-
Matt Roper authored
The bspec description for this workaround tells us to program 0xFFFF_FFFF into both FBC_RT_BASE_ADDR_REGISTER_* registers, but we've previously found that this leads to failures in CI. Our suspicion is that the failures are caused by this valid turning on the "address valid bit" even though we're intentionally supplying an invalid address. Experimentation has shown that setting all bits _except_ for the RT_VALID bit seems to avoid these failures. v2: - Mask off the RT_VALID bit. Experimentation with CI trybot indicates that this is necessary to avoid reset failures on BCS. v3: - Program RT_BASE before RT_BASE_UPPER so that the valid bit is turned off by the first write. (Chris) Bspec: 11388 Bspec: 33451 Signed-off-by:
-
Matt Roper authored
On gen11 the XY_FAST_COPY_BLT command has some size restrictions on its usage. Although this instruction is mainly used by userspace, i915 also uses it to copy object contents during some selftests, so let's ensure the restrictions are followed. Bspec: 6544 Signed-off-by:
-
Matt Roper authored
The bspec documents multiple MCR ranges; make sure they're all captured by the driver. Bspec: 13991, 52079 Fixes: 592a7c5e ("drm/i915: Extend non readable mcr range") Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by:
-
Chris Wilson authored
Throw in the inverse patterns to create more examples of poison to use against the LRC state. Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by:
-
- 12 Mar, 2020 13 commits
-
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
amd-drm-next-5.7-2020-03-10: amdgpu: - SR-IOV fixes - Fix up fallout from drm load/unload callback removal - Navi, renoir power management watermark fixes - Refactor smu parameter handling - Display FEC fixes - Display DCC fixes - HDCP fixes - Add support for USB-C PD firmware updates - Pollock detection fix - Rework compute ring priority handling - RAS fixes - Misc cleanups amdkfd: - Consolidate more gfx config details in amdgpu - Consolidate bo alloc flags - Improve code comments - SDMA MQD fixes - Misc cleanups gpu scheduler: - Add suport for modifying the sched list uapi: - Clarify comments about GEM_CREATE flags that are not used by userspace. The kernel driver has always prevented userspace from using these. They are only used internally in the kernel driver. Signed-off-by:
-
Caz Yokoyama authored
This reverts commit 36a6b5d9. The commit takes care Wa_1604544889 which was fixed on a0 stepping based on a0 replan. So no SW workaround is required on any stepping now. Reviewed-by:
Caz Yokoyama <caz.yokoyama@intel.com> Signed-off-by:
-
Chris Wilson authored
During driver unload, we have many asserts that we have released our bookkeeping structs and are idle. In some cases, these struct are protected by RCU and we do not release them until after an RCU grace period. Reported-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Fixes: 130a95e9 ("drm/i915/gem: Consolidate ctx->engines[] release") Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by:
-
Chris Wilson authored
Switch igt_vm_isolation() to using igt_random_offset(). Signed-off-by:
Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200312154708.1720-1-chris@chris-wilson.co.uk
-
Chris Wilson authored
Since the relocations are no longer performed under a global struct_mutex, or any other lock, that is also held by pagefault handlers, we can relax and allow our fast path to take a fault. As we no longer need to abort the fast path for lock avoidance, we no longer need the slow path handling at all. Signed-off-by:
-
Sebastian Andrzej Siewior authored
I noticed that there is a prototype for vmw_fifo_ping_host_locked() but no function. Then I looked further and noticed more functions which are not used anymore or functions protoypes which remained after the function was removed. Remove unused function (prototypes). Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by:
-
Sebastian Andrzej Siewior authored
vmw_fifo_ping_host() disables preemption around a test and a register write via vmw_write(). The write function acquires a spinlock_t typed lock which is not allowed in a preempt_disable()ed section on PREEMPT_RT. This has been reported in the bugzilla. It has been explained by Thomas Hellstrom that this preempt_disable()ed section is not required for correctness. Remove the preempt_disable() section. Link: https://bugzilla.kernel.org/show_bug.cgi?id=206591 Link: https://lkml.kernel.org/r/0b5e1c65d89951de993deab06d1d197b40fd67aa.camel@vmware.comSigned-off-by:
-
Tvrtko Ursulin authored
Allow super long OpenCL workloads which cannot be preempted within the default timeout to run out of the box. v2: * Make it stick out more and apply only to RCS. (Chris) v3: * Mention platform override in kconfig. (Joonas) Signed-off-by:
Michal Mrozek <Michal.mrozek@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200312115748.29970-1-tvrtko.ursulin@linux.intel.com
-
Thomas Hellstrom authored
TTM doesn't yet fully support mapping of DMA memory when SEV is active, so in that case, refuse DMA operation. For guest-backed object operation this means 3D acceleration will be disabled. For host-backed, VRAM will be used for data transfer between the guest and the device. Signed-off-by:
Brian Paul <brianp@vmware.com>
-
Thomas Hellstrom authored
When we refuse DMA from system pages for whatever reason, we don't handle that correctly when guest-backed objects was enabled. Since guest-backed objects by definition require DMA to and from system pages, disable all functionality that relies on them. That basically amounts to 3D acceleration and screen targets. Signed-off-by:
-
Dmitry Osipenko authored
Runtime PM and RGB output need to be released when host1x client registration fails. The releasing is missed in the code, let's correct it. Signed-off-by:
-
Dmitry Osipenko authored
The devm_platform_ioremap_resource() helper replaces few lines of a boilerplate code with a single line, making code to look cleaner a tad. Signed-off-by:
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
drm-misc-next for 5.7: UAPI Changes: Cross-subsystem Changes: Core Changes: Driver Changes: - fb-helper: Remove drm_fb_helper_{add,add_all,remove}_one_connector - fbdev: some cleanups and dead-code removal - Conversions to simple-encoder - zero-length array removal - Panel: panel-dpi support in panel-simple, Novatek NT35510, Elida KD35T133, Signed-off-by:
-
- 11 Mar, 2020 12 commits
-
-
Chris Wilson authored
When applying the context-barrier, we only care about the current engines, as the next set of engines will be naturally after the barrier. So we can skip holding the ctx->engines_mutex while constructing the request by taking a sneaky reference to the i915_gem_engines instead. Signed-off-by:
-
Chris Wilson authored
The sw-fence notify function requires to be at least 4-byte aligned so that we can use the low bits in the function pointer for internal fence flags. Make it so. References: https://gitlab.freedesktop.org/drm/intel/issues/1433 Fixes: 42fb60de ("drm/i915/gem: Don't leak non-persistent requests on changing engines") Signed-off-by:
-
Kai Vehmanen authored
Gen12 hardware supports HDMI audio pixel clocks of 296.7/297Mhz and 593.4/594Mhz. Add the missing rates and add logic to ignore them if running on older hardware. Bspec: 49333 Signed-off-by:
Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Chris Wilson authored
[11057.642683] BUG: KCSAN: data-race in i915_gem_mmap [i915] / singleton_release [i915] [11057.642717] [11057.642740] write (marked) to 0xffff8881f24471a0 of 8 bytes by task 44668 on cpu 2: [11057.643162] singleton_release+0x38/0x60 [i915] [11057.643192] __fput+0x160/0x3c0 [11057.643217] ____fput+0x16/0x20 [11057.643241] task_work_run+0xba/0x100 [11057.643263] exit_to_usermode_loop+0xe4/0xf0 [11057.643286] do_syscall_64+0x27e/0x2c0 [11057.643314] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [11057.643339] [11057.643359] read to 0xffff8881f24471a0 of 8 bytes by task 44667 on cpu 3: [11057.643774] i915_gem_mmap+0x295/0x670 [i915] [11057.643802] mmap_region+0x62b/0xac0 [11057.643825] do_mmap+0x414/0x6b0 [11057.643848] vm_mmap_pgoff+0xa9/0xf0 [11057.643875] ksys_mmap_pgoff+0x1ac/0x2f0 [11057.643900] do_syscall_64+0x6e/0x2c0 [11057.643924] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Signed-off-by:
-
Chris Wilson authored
Record the initial active element we use when building the next ELSP submission, so that we can compare against it latter to see if there's no change. Fixes: 44d0a9c0 ("drm/i915/execlists: Skip redundant resubmission") Signed-off-by:
-
Chris Wilson authored
Avoid angering kcsan by serialising the read of the pm_events with the write in rps_disable_interrupts. [ 6268.713419] BUG: KCSAN: data-race in intel_rps_park [i915] / rps_work [i915] [ 6268.713437] [ 6268.713449] write to 0xffff8881eda8efac of 4 bytes by task 1127 on cpu 3: [ 6268.713680] intel_rps_park+0x136/0x260 [i915] [ 6268.713905] __gt_park+0x61/0xa0 [i915] [ 6268.714128] ____intel_wakeref_put_last+0x42/0x90 [i915] [ 6268.714352] __intel_wakeref_put_work+0xd3/0xf0 [i915] [ 6268.714369] process_one_work+0x3b1/0x690 [ 6268.714384] worker_thread+0x80/0x670 [ 6268.714398] kthread+0x19a/0x1e0 [ 6268.714412] ret_from_fork+0x1f/0x30 [ 6268.714423] [ 6268.714435] read to 0xffff8881eda8efac of 4 bytes by task 950 on cpu 2: [ 6268.714664] rps_work+0xc2/0x680 [i915] [ 6268.714679] process_one_work+0x3b1/0x690 [ 6268.714693] worker_thread+0x80/0x670 [ 6268.714707] kthread+0x19a/0x1e0 [ 6268.714720] ret_from_fork+0x1f/0x30 v2: Mark all reads and writes of rpm->pm_events. The flow of enabling/disabling rps is stronly ordered, so the writes and interrupt generation are also strongly ordered -- just this may not be visible to the compiler, so provide annotations. Signed-off-by:
-
Chris Wilson authored
Extend i915_request_await_active() to be able to asynchronously wait on all the tracked timelines simultaneously. Signed-off-by:
-
Takashi Iwai authored
Since snprintf() returns the would-be-output size instead of the actual output size, the succeeding calls may go beyond the given buffer limit. Fix it by replacing with scnprintf(). Signed-off-by:
Takashi Iwai <tiwai@suse.de> Reviewed-by:
-
Wambui Karuga authored
Convert various instances of the printk based drm logging macros to the struct drm_device based logging macros in i915/display/intel_overlay.c. This transformation was achieved using the following coccinelle script: @@ identifier fn, T; @@ fn(...,struct drm_i915_private *T,...) { <+... ( -DRM_INFO( +drm_info(&T->drm, ...) | -DRM_ERROR( +drm_err(&T->drm, ...) | -DRM_WARN( +drm_warn(&T->drm, ...) | -DRM_DEBUG( +drm_dbg(&T->drm, ...) | -DRM_DEBUG_DRIVER( +drm_dbg(&T->drm, ...) | -DRM_DEBUG_KMS( +drm_dbg_kms(&T->drm, ...) | -DRM_DEBUG_ATOMIC( +drm_dbg_atomic(&T->drm, ...) ) ...+> } @@ identifier fn, T; @@ fn(...) { ... struct drm_i915_private *T = ...; <+... ( -DRM_INFO( +drm_info(&T->drm, ...) | -DRM_ERROR( +drm_err(&T->drm, ...) | -DRM_WARN( +drm_warn(&T->drm, ...) | -DRM_DEBUG( +drm_dbg(&T->drm, ...) | -DRM_DEBUG_KMS( +drm_dbg_kms(&T->drm, ...) | -DRM_DEBUG_DRIVER( +drm_dbg(&T->drm, ...) | -DRM_DEBUG_ATOMIC( +drm_dbg_atomic(&T->drm, ...) ) ...+> } Note that this converts DRM_DEBUG to drm_dbg(). Checkpatch warnings were addressed manually. References: https://lists.freedesktop.org/archives/dri-devel/2020-January/253381.htmlSigned-off-by:Wambui Karuga <wambui.karugax@gmail.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ca3c14de13e308419caf33eb4bbf274f5387f1e0.1583766715.git.jani.nikula@intel.com
-
Wambui Karuga authored
Converts various instances of the printk based drm logging macros to the struct drm_device based logging macros in i915/display/intel_lvds.c. This transformation was done by the following coccinelle script that matches based on the existence of a drm_i915_private device: @@ identifier fn, T; @@ fn(...,struct drm_i915_private *T,...) { <+... ( -DRM_INFO( +drm_info(&T->drm, ...) | -DRM_ERROR( +drm_err(&T->drm, ...) | -DRM_WARN( +drm_warn(&T->drm, ...) | -DRM_DEBUG( +drm_dbg(&T->drm, ...) | -DRM_DEBUG_DRIVER( +drm_dbg(&T->drm, ...) | -DRM_DEBUG_KMS( +drm_dbg_kms(&T->drm, ...) | -DRM_DEBUG_ATOMIC( +drm_dbg_atomic(&T->drm, ...) ) ...+> } @@ identifier fn, T; @@ fn(...) { ... struct drm_i915_private *T = ...; <+... ( -DRM_INFO( +drm_info(&T->drm, ...) | -DRM_ERROR( +drm_err(&T->drm, ...) | -DRM_WARN( +drm_warn(&T->drm, ...) | -DRM_DEBUG( +drm_dbg(&T->drm, ...) | -DRM_DEBUG_KMS( +drm_dbg_kms(&T->drm, ...) | -DRM_DEBUG_DRIVER( +drm_dbg(&T->drm, ...) | -DRM_DEBUG_ATOMIC( +drm_dbg_atomic(&T->drm, ...) ) ...+> } New checkpatch warnings were fixed manually. Signed-off-by: -
Wambui Karuga authored
Convert various uses of the printk based drm logging macros to the struct drm_device based logging macros in i915/display/intel_lpe_audio.c. Note that this converts DRM_DEBUG to drm_dbg(). References: https://lists.freedesktop.org/archives/dri-devel/2020-January/253381.htmlSigned-off-by:
-
Wambui Karuga authored
Converts various instances of the printk based drm logging macros to the struct drm_device based logging macros in i915/display/intel_hotplug.c. In some cases, this involves extracting the drm_i915_private pointer from the drm_device struct to be used in the logging macros. Signed-off-by:
-
