- 21 Sep, 2014 40 commits
-
-
Mauro Carvalho Chehab authored
drivers/media/usb/hackrf/hackrf.c:64:3: warning: this decimal constant is unsigned only in ISO C90 [enabled by default] .rangehigh = 4294967294, /* max u32, hw goes over 7GHz */ ^ Signed-off-by:Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Antti Palosaari authored
HackRF SDR driver. Video4Linux USB device. Signed-off-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
-
Antti Palosaari authored
V4L2 driver for HackRF SDR. Very basic version, with reduced feature set. Driver implements receiver only, hardware supports also transmitter. USB ID 1d50:6089. Model HackRF One Signed-off-by:
-
Laurent Pinchart authored
The ARGB32 pixel format's fourcc value is defined to 'BA24' in the videodev2.h header, but documented as 'AX24'. Fix the documentation. Reported-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by:
-
Laurent Pinchart authored
The existing RGB555X pixel format is ill-defined in respect to its alpha bit and its meaning is driver dependent. Create new standard ARGB555X and XRGB555X variants with clearly defined meanings and make the existing variant deprecated. The new pixel formats 4CC values have been selected to match the DRM 4CCs for the same in-memory formats. Signed-off-by:
-
Laurent Pinchart authored
Replace strncpy + manually setting the terminating '\0' with an strlcpy call. Reported-by:
Joe Perches <joe@perches.com> Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Paul Fertser authored
As reported on [1], this device needs this quirk to be able to reliably initialise the webcam. [1] http://ubuntuforums.org/showthread.php?t=2145996 Cc: stable@vger.kernel.org Signed-off-by:
Paul Fertser <fercerpav@gmail.com> Signed-off-by:
-
William Manley authored
The uvcvideo webcam driver exposes the v4l2 control "Exposure (Absolute)" which allows the user to control the exposure time of the webcam, essentially controlling the brightness of the received image. By default the webcam automatically adjusts the exposure time automatically but the if you set the control "Exposure, Auto"="Manual Mode" the user can fix the exposure time. Unfortunately it seems that the Logitech C920 has a firmware bug where it will forget that it's in manual mode temporarily during initialisation. This means that the camera doesn't respect the exposure time that the user requested if they request it before starting to stream video. They end up with a video stream which is either too bright or too dark and must reset the controls after video starts streaming. This patch introduces the quirk UVC_QUIRK_RESTORE_CTRLS_ON_INIT which causes the cached controls to be re-uploaded to the camera immediately after initialising the camera. This quirk is applied to the C920 to work around this camera bug. Signed-off-by:
William Manley <will@williammanley.net> Signed-off-by:
-
Vincent Palatin authored
Map V4L2_CID_TILT_SPEED and V4L2_CID_PAN_SPEED to the standard UVC CT_PANTILT_RELATIVE_CONTROL terminal control request. Tested by plugging a Logitech ConferenceCam C3000e USB camera and controlling pan/tilt from the userspace using the VIDIOC_S_CTRL ioctl. Verified that it can pan and tilt at the same time in both directions. Signed-off-by:
Vincent Palatin <vpalatin@chromium.org> Reviewed-by:
Pawel Osciak <posciak@chromium.org> Signed-off-by:
-
Vincent Palatin authored
The V4L2_CID_PAN_SPEED and V4L2_CID_TILT_SPEED controls allow to move the camera by setting its rotation speed around its axis. Signed-off-by:
-
Prabhakar Lad authored
this patch removes unneeded dependency of ARCH_OMAP3 on VIDEO_DM6446_CCDC. Also the top level platform Makefile descended into davinci/ without any dependency so just drop the dependency obj-y, as obj-$(CONFIG_ARCH_DAVINCI) already exists. Reported-by:
Andreas Ruprecht <rupran@einserver.de> Signed-off-by:
Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by:
-
Prabhakar Lad authored
It is possible to call STREAMON without having any buffers queued. So vb2_is_streaming() can return true without start_streaming() having been called. Only after at least one buffer has been queued will start_streaming be called. The check vb2_is_streaming() is incorrect as this would start the DMA without having proper DMA pointers set up. this patch uses vb2_start_streaming_called() instead to check is streaming was called. Signed-off-by:
-
Prabhakar Lad authored
It is possible to call STREAMON without having any buffers queued. So vb2_is_streaming() can return true without start_streaming() having been called. Only after at least one buffer has been queued will start_streaming be called. The check vb2_is_streaming() is incorrect as this would start the DMA without having proper DMA pointers set up. this patch uses vb2_start_streaming_called() instead to check is streaming was called. Signed-off-by:
-
Prabhakar Lad authored
this patch adds a helper to get the status if start_streaming() was called successfully. Signed-off-by:
-
Prabhakar Lad authored
this patch drops setting of vb2 buffer state to VB2_BUF_STATE_ACTIVE, as any buffer queued to the driver is marked ACTIVE by the vb2 core. Signed-off-by:
-
Prabhakar Lad authored
this patch drops setting of vb2 buffer state to VB2_BUF_STATE_ACTIVE, as any buffer queued to the driver is marked ACTIVE by the vb2 core. Signed-off-by:
-
Hans de Goede authored
All the infrastructure for this is already there, and despite our desires for the old videobuf code to go away, it is currently still in use in 18 drivers. Allowing reqbufs(0) makes these drivers behave consistent with modern drivers, making live easier for userspace, see e.g. : https://bugzilla.gnome.org/show_bug.cgi?id=735660Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Acked-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
-
Hans Verkuil authored
(Changes since v2: dropped local variable as suggested by Laurent) Commit f035eb4e (videobuf2: fix lockdep warning) unfortunately removed the mmap_sem lock that is needed around the call to __qbuf_userptr. Amazingly nobody noticed this (especially me as the author) until Jan Kara pointed this out to me. Signed-off-by:
Jan Kara <jack@suse.cz> Acked-by:
-
Rasmus Villemoes authored
Test for definedness of the macro which is actually defined, and which matches the name of the file. Signed-off-by:
Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by:
-
Rasmus Villemoes authored
Three trailing underscores is one too many. Signed-off-by:
-
Axel Lin authored
This ensures device->streaming has correct status. Signed-off-by:
Axel Lin <axel.lin@ingics.com> Acked-by:
-
Himangi Saraogi authored
This patch introduces the use of the function usb_endpoint_is_int_in. The Coccinelle semantic patch that makes these changes is as follows: @@ struct usb_endpoint_descriptor *epd; @@ - ((epd->bEndpointAddress & \(USB_ENDPOINT_DIR_MASK\|0x80\)) == - \(USB_DIR_IN\|0x80\)) + usb_endpoint_dir_in(epd) @@ struct usb_endpoint_descriptor *epd; @@ - ((epd->bmAttributes & \(USB_ENDPOINT_XFERTYPE_MASK\|3\)) == - \(USB_ENDPOINT_XFER_INT\|3\)) + usb_endpoint_xfer_int(epd) @@ struct usb_endpoint_descriptor *epd; @@ - (usb_endpoint_xfer_int(epd) && usb_endpoint_dir_in(epd)) + usb_endpoint_is_int_in(epd) Signed-off-by:
Himangi Saraogi <himangi774@gmail.com> Acked-by:
Julia Lawall <julia.lawall@lip6.fr> Signed-off-by:
-
Antti Palosaari authored
Use RegMap API to handle all the boring I2C register access boilerplate stuff. Signed-off-by:
-
Antti Palosaari authored
foo_dev seems to be most correct term for the structure holding data of each device instance. It is most used term in Kernel codebase and also examples from book Linux Device Drivers, Third Edition, uses it. Signed-off-by:
-
Antti Palosaari authored
There is no need to print module name nor function name as those are done by kernel logging system when dev_xxx logging is used and driver is proper I2C driver. Signed-off-by:
-
Antti Palosaari authored
Convert driver from DVB proprietary model to common I2C model. Signed-off-by:
-
Antti Palosaari authored
Used tda18212 tuner is implemented as a I2C driver. Use em28xx tuner I2C client for tda18212 driver. Signed-off-by:
-
Antti Palosaari authored
Used tda18212 tuner is implemented as I2C driver. Implement I2C client to anysee and use it for tda18212. Signed-off-by:
-
Antti Palosaari authored
We need carry pointer to frontend via config struct (I2C platform_data ptr) when I2C model is used. Add that pointer first in order to keep build unbreakable during conversion. Signed-off-by:
-
Antti Palosaari authored
We need to init supported stats here in order signal app which stats are supported. Signed-off-by:
-
Antti Palosaari authored
It crash kernel when device was removed while it was streaming. That is because we removed driver and frontend thread was still running. Use new callback which allows I2C driver removal just after frontend is unregistered. V2: fixed by reported by Daniel Reported-by:
Daniel Glöckner <daniel-gl@gmx.net> Signed-off-by:
-
Antti Palosaari authored
Add tuner_detach callback in order to allow custom detach. It is needed when tuner driver is implemented I2C client or some other kernel bus, but not proprietary dvb_attach / dvb_detach. Signed-off-by:
-
Antti Palosaari authored
Add frontend_detach callback in order to allow custom detach. It is needed when demod driver is implemented I2C client or some other kernel bus, but not proprietary dvb_attach / dvb_detach. Signed-off-by:
-
Antti Palosaari authored
Statistics are now calculated for DVBv5 and those DVBv5 values are returned for legacy DVBv3 calls also. So we could remove all old statistics calculation logic. Signed-off-by:
-
Antti Palosaari authored
DVBv5 BER is calculated anyway, so just return it for legacy read_ber() API too. Signed-off-by:
-
Antti Palosaari authored
Remove 'duplicate' DVBv3 read UCB implementation and return value, calculated already for DVBv5 statistics. Signed-off-by:
-
Antti Palosaari authored
Implement following DTV API commands: DTV_STAT_POST_ERROR_BIT_COUNT DTV_STAT_POST_TOTAL_BIT_COUNT These will provide post-Viterbi bit error rate reporting. Signed-off-by:
-
Antti Palosaari authored
Implement following API commands: DTV_STAT_ERROR_BLOCK_COUNT DTV_STAT_TOTAL_BLOCK_COUNT These returns total and uncorrected error packets from outer FEC. Signed-off-by:
-
Antti Palosaari authored
Remove 'duplicate' DVBv3 read SNR implementation and return value, calculated already by DVBv5 CNR, from the cache. Signed-off-by:
-
Antti Palosaari authored
Return CNR via DVBv5 statistics API. Signed-off-by:
-
