- 24 Feb, 2021 40 commits
-
-
Miaohe Lin authored
If list_lru_shrink_count is 0, we always return SHRINK_EMPTY regardless of the value of max_nodes. So we can return early if nodes == 0 to save some cpu cycles of approximating a reasonable limit for the nodes. Link: https://lkml.kernel.org/r/20210123073825.46709-1-linmiaohe@huawei.comSigned-off-by:
Miaohe Lin <linmiaohe@huawei.com> Reviewed-by:
Andrew Morton <akpm@linux-foundation.org> Acked-by:
Vlastimil Babka <vbabka@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Alex Shi authored
The function just returns 2 results, so using a 'switch' to deal with its result is unnecessary. Also simplify it to a bool func as Vlastimil suggested. Also remove 'goto' by reusing list_move(), and take Matthew Wilcox's suggestion to update comments in function. Link: https://lkml.kernel.org/r/728874d7-2d93-4049-68c1-dcc3b2d52ccd@linux.alibaba.comSigned-off-by:
Alex Shi <alex.shi@linux.alibaba.com> Reviewed-by:
-
Chen Wandun authored
If hugetlb_cma is enabled, it will skip boot time allocation when allocating gigantic page, that doesn't means allocation failure, so suppress this warning info. Link: https://lkml.kernel.org/r/20210219123909.13130-1-chenwandun@huawei.com Fixes: cf11e85f ("mm: hugetlb: optionally allocate gigantic hugepages using cma") Signed-off-by:
Chen Wandun <chenwandun@huawei.com> Reviewed-by:
Mike Kravetz <mike.kravetz@oracle.com> Cc: Roman Gushchin <guro@fb.com> Signed-off-by:
-
Mike Kravetz authored
page structs are not guaranteed to be contiguous for gigantic pages. The routine copy_huge_page_from_user can encounter gigantic pages, yet it assumes page structs are contiguous when copying pages from user space. Since page structs for the target gigantic page are not contiguous, the data copied from user space could overwrite other pages not associated with the gigantic page and cause data corruption. Non-contiguous page structs are generally not an issue. However, they can exist with a specific kernel configuration and hotplug operations. For example: Configure the kernel with CONFIG_SPARSEMEM and !CONFIG_SPARSEMEM_VMEMMAP. Then, hotplug add memory for the area where the gigantic page will be allocated. Link: https://lkml.kernel.org/r/20210217184926.33567-2-mike.kravetz@oracle.com Fixes: 8fb5debc ("userfaultfd: hugetlbfs: add hugetlb_mcopy_atomic_pte for userfaultfd support") Signed-off-by:
-
Mike Kravetz authored
page structs are not guaranteed to be contiguous for gigantic pages. The routine update_and_free_page can encounter a gigantic page, yet it assumes page structs are contiguous when setting page flags in subpages. If update_and_free_page encounters non-contiguous page structs, we can see “BUG: Bad page state in process …” errors. Non-contiguous page structs are generally not an issue. However, they can exist with a specific kernel configuration and hotplug operations. For example: Configure the kernel with CONFIG_SPARSEMEM and !CONFIG_SPARSEMEM_VMEMMAP. Then, hotplug add memory for the area where the gigantic page will be allocated. Zi Yan outlined steps to reproduce here [1]. [1] https://lore.kernel.org/linux-mm/16F7C58B-4D79-41C5-9B64-A1A1628F4AF2@nvidia.com/ Link: https://lkml.kernel.org/r/20210217184926.33567-1-mike.kravetz@oracle.com Fixes: 944d9fec ("hugetlb: add support for gigantic page allocation at runtime") Signed-off-by:
Zi Yan <ziy@nvidia.com> Signed-off-by:
-
Miaohe Lin authored
We can use helper huge_page_size() to get the hugepage size directly to simplify the code slightly. [linmiaohe@huawei.com: use helper huge_page_size() to get hugepage size] Link: https://lkml.kernel.org/r/20210209021803.49211-1-linmiaohe@huawei.com Link: https://lkml.kernel.org/r/20210208082450.15716-1-linmiaohe@huawei.comSigned-off-by:
David Hildenbrand <david@redhat.com> Signed-off-by:
-
Miaohe Lin authored
All callers know they are operating on a hugetlb head page. So this VM_BUG_ON_PAGE can not catch anything useful. Link: https://lkml.kernel.org/r/20210209071151.44731-1-linmiaohe@huawei.comSigned-off-by:
Oscar Salvador <osalvador@suse.de> Cc: Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by:
-
Miaohe Lin authored
We could use helper function range_in_vma() to check whether the vma is in the desired range to simplify the code. Link: https://lkml.kernel.org/r/20210204112949.43051-1-linmiaohe@huawei.comSigned-off-by:
-
Miaohe Lin authored
We could use helper function pages_per_huge_page() to get the number of pages in a hstate to simplify the code slightly. Link: https://lkml.kernel.org/r/20210205084513.29624-1-linmiaohe@huawei.comSigned-off-by:
-
Aneesh Kumar K.V authored
Differentiate between hardware not supporting hugepages and user disabling THP via 'echo never > /sys/kernel/mm/transparent_hugepage/enabled' For the devdax namespace, the kernel handles the above via the supported_alignment attribute and failing to initialize the namespace if the namespace align value is not supported on the platform. For the fsdax namespace, the kernel will continue to initialize the namespace. This can result in the kernel creating a huge pte entry even though the hardware don't support the same. We do want hugepage support with pmem even if the end-user disabled THP via sysfs file (/sys/kernel/mm/transparent_hugepage/enabled). Hence differentiate between hardware/firmware lacking support vs user-controlled disable of THP and prevent a huge fault if the hardware lacks hugepage support. Link: https://lkml.kernel.org/r/20210205023956.417587-1-aneesh.kumar@linux.ibm.comSigned-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Reviewed-by:
Dan Williams <dan.j.williams@intel.com> Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com> Cc: Jan Kara <jack@suse.cz> Cc: David Hildenbrand <david@redhat.com> Signed-off-by:
-
Miaohe Lin authored
The return value of set_huge_zero_page() is always ignored. So we should drop such return value. Link: https://lkml.kernel.org/r/20210203084816.46307-1-linmiaohe@huawei.comSigned-off-by:
-
Zhiyuan Dai authored
Fix typo in comment. Link: https://lkml.kernel.org/r/1612256106-9436-1-git-send-email-daizhiyuan@phytium.com.cnSigned-off-by:
Zhiyuan Dai <daizhiyuan@phytium.com.cn> Signed-off-by:
-
Yanfei Xu authored
Gigantic page is a compound page and its order is more than 1. Thus it must be available for hpage_pincount. Let's remove the redundant check for gigantic page. Link: https://lkml.kernel.org/r/20210202112002.73170-1-yanfei.xu@windriver.comSigned-off-by:
Yanfei Xu <yanfei.xu@windriver.com> Reviewed-by:
-
Miaohe Lin authored
Fix typos sasitfy to satisfy, reservtion to reservation, hugegpage to hugepage and uniprocesor to uniprocessor in comments. Link: https://lkml.kernel.org/r/20210128112028.64831-1-linmiaohe@huawei.comSigned-off-by:
Souptick Joarder <jrdr.linux@gmail.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by:
-
Joao Martins authored
For a given hugepage backing a VA, there's a rather ineficient loop which is solely responsible for storing subpages in GUP @pages/@vmas array. For each subpage we check whether it's within range or size of @pages and keep increment @pfn_offset and a couple other variables per subpage iteration. Simplify this logic and minimize the cost of each iteration to just store the output page/vma. Instead of incrementing number of @refs iteratively, we do it through pre-calculation of @refs and only with a tight loop for storing pinned subpages/vmas. Additionally, retain existing behaviour with using mem_map_offset() when recording the subpages for configurations that don't have a contiguous mem_map. pinning consequently improves bringing us close to {pin,get}_user_pages_fast: - 16G with 1G huge page size gup_test -f /mnt/huge/file -m 16384 -r 30 -L -S -n 512 -w PIN_LONGTERM_BENCHMARK: ~12.8k us -> ~5.8k us PIN_FAST_BENCHMARK: ~3.7k us Link: https://lkml.kernel.org/r/20210128182632.24562-3-joao.m.martins@oracle.comSigned-off-by:Joao Martins <joao.m.martins@oracle.com> Reviewed-by:
-
Joao Martins authored
Patch series "mm/hugetlb: follow_hugetlb_page() improvements", v2. While looking at ZONE_DEVICE struct page reuse particularly the last patch[0], I found two possible improvements for follow_hugetlb_page() which is solely used for get_user_pages()/pin_user_pages(). The first patch batches page refcount updates while the second tidies up storing the subpages/vmas. Both together bring the cost of slow variant of gup() cost from ~87.6k usecs to ~5.8k usecs. libhugetlbfs tests seem to pass as well gup_test benchmarks with hugetlbfs vmas. This patch (of 2): follow_hugetlb_page() once it locks the pmd/pud, checks all its N subpages in a huge page and grabs a reference for each one. Similar to gup-fast, have follow_hugetlb_page() grab the head page refcount only after counting all its subpages that are part of the just faulted huge page. Consequently we reduce the number of atomics necessary to pin said huge page, which improves non-fast gup() considerably: - 16G with 1G huge page size gup_test -f /mnt/huge/file -m 16384 -r 10 -L -S -n 512 -w PIN_LONGTERM_BENCHMARK: ~87.6k us -> ~12.8k us Link: https://lkml.kernel.org/r/20210128182632.24562-1-joao.m.martins@oracle.com Link: https://lkml.kernel.org/r/20210128182632.24562-2-joao.m.martins@oracle.comSigned-off-by:
-
Jiapeng Zhong authored
Fix the following coccicheck warnings: mm/hugetlb.c:3372:20-22: WARNING !A || A && B is equivalent to !A || B. Link: https://lkml.kernel.org/r/1611643468-52233-1-git-send-email-abaci-bugfix@linux.alibaba.comSigned-off-by:
Jiapeng Zhong <abaci-bugfix@linux.alibaba.com> Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Reviewed-by:
-
Miaohe Lin authored
If a hugetlbfs filesystem is created with the min_size option and without the size option, used_hpages is always 0 and might lead to release subpool prematurely because it indicates no pages are used now while there might be. In order to fix this issue, we should check used_hpages == 0 iff max_hpages accounting is enabled. As max_hpages accounting should be enabled in most common case, this is not worth a Cc stable. [mike.kravetz@oracle.com: new changelog] Link: https://lkml.kernel.org/r/20210126115510.53374-1-linmiaohe@huawei.comSigned-off-by:
Hongxiang Lou <louhongxiang@huawei.com> Signed-off-by:
-
Miaohe Lin authored
Since commit a5516438 ("hugetlb: modular state for hugetlb page size"), we can use huge_page_order to access hstate->order and pages_per_huge_page to fetch the pages per huge page. But gather_bootmem_prealloc() forgot to use it. Link: https://lkml.kernel.org/r/20210114114435.40075-1-linmiaohe@huawei.comSigned-off-by:
-
Miaohe Lin authored
When reservation accounting remains unchanged, hugetlb_acct_memory() will do nothing except holding and releasing hugetlb_lock. We should avoid this unnecessary hugetlb_lock lock/unlock cycle which is happening on 'most' hugetlb munmap operations by check delta against 0 at the beginning of hugetlb_acct_memory. Link: https://lkml.kernel.org/r/20210115092013.61012-1-linmiaohe@huawei.comSigned-off-by:
-
Li Xinhai authored
The current code would unnecessarily expand the address range. Consider one example, (start, end) = (1G-2M, 3G+2M), and (vm_start, vm_end) = (1G-4M, 3G+4M), the expected adjustment should be keep (1G-2M, 3G+2M) without expand. But the current result will be (1G-4M, 3G+4M). Actually, the range (1G-4M, 1G) and (3G, 3G+4M) would never been involved in pmd sharing. After this patch, we will check that the vma span at least one PUD aligned size and the start,end range overlap the aligned range of vma. With above example, the aligned vma range is (1G, 3G), so if (start, end) range is within (1G-4M, 1G), or within (3G, 3G+4M), then no adjustment to both start and end. Otherwise, we will have chance to adjust start downwards or end upwards without exceeding (vm_start, vm_end). Mike: : The 'adjusted range' is used for calls to mmu notifiers and cache(tlb) : flushing. Since the current code unnecessarily expands the range in some : cases, more entries than necessary would be flushed. This would/could : result in performance degradation. However, this is highly dependent on : the user runtime. Is there a combination of vma layout and calls to : actually hit this issue? If the issue is hit, will those entries : unnecessarily flushed be used again and need to be unnecessarily reloaded? Link: https://lkml.kernel.org/r/20210104081631.2921415-1-lixinhai.lxh@gmail.com Fixes: 75802ca6 ("mm/hugetlb: fix calculation of adjust_range_if_pmd_sharing_possible") Signed-off-by:
Li Xinhai <lixinhai.lxh@gmail.com> Suggested-by:
-
Miaohe Lin authored
In hugetlb_sysfs_add_hstate(), we would do kobject_put() on hstate_kobjs when failed to create sysfs group but forget to set hstate_kobjs to NULL. Then in hugetlb_register_node() error path, we may free it again via hugetlb_unregister_node(). Link: https://lkml.kernel.org/r/20210107123249.36964-1-linmiaohe@huawei.com Fixes: a3437870 ("hugetlb: new sysfs interface") Signed-off-by:
Muchun Song <smuchun@gmail.com> Signed-off-by:
-
Bibo Mao authored
Function set_pmd_at is to set pmd entry, if tlb entry need to be flushed, there exists pmdp_huge_clear_flush alike function before set_pmd_at is called. So it is not necessary to call flush_tlb_all in this function. In these scenarios, tlb for the pmd range needs to be flushed: - privilege degrade such as wrprotect is set on the pmd entry - pmd entry is cleared - there is exception if set_pmd_at is issued by dup_mmap, since flush_tlb_mm is called for parent process, it is not necessary to flush tlb in function copy_huge_pmd. Link: http://lkml.kernel.org/r/1592990792-1923-3-git-send-email-maobibo@loongson.cnSigned-off-by:
Bibo Mao <maobibo@loongson.cn> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Daniel Silsby <dansilsby@gmail.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Paul Burton <paulburton@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by:
-
Bibo Mao authored
When set_pmd_at is called in function do_huge_pmd_anonymous_page, new tlb entry can be added by software on MIPS platform. Here add update_mmu_cache_pmd when pmd entry is set, and update_mmu_cache_pmd is defined as empty excepts arc/mips platform. This patch has no negative effect on other platforms except arc/mips system. Link: http://lkml.kernel.org/r/1592990792-1923-2-git-send-email-maobibo@loongson.cnSigned-off-by:
-
Aili Yao authored
When a memory uncorrected error is triggered by process who accessed the address with error, It's Action Required Case for only current process which triggered this; This Action Required case means Action optional to other process who share the same page. Usually killing current process will be sufficient, other processes sharing the same page will get be signaled when they really touch the poisoned page. But there is another scenario that other processes sharing the same page want to be signaled early with PF_MCE_EARLY set. In this case, we should get them into kill list and signal BUS_MCEERR_AO to them. So in this patch, task_early_kill will check current process if force_early is set, and if not current,the code will fallback to find_early_kill_thread() to check if there is PF_MCE_EARLY process who cares the error. In kill_proc(), BUS_MCEERR_AR is only send to current, other processes in kill list will be signaled with BUS_MCEERR_AO. Link: https://lkml.kernel.org/r/20210122132424.313c8f5f.yaoaili@kingsoft.comSigned-off-by:
Aili Yao <yaoaili@kingsoft.com> Reviewed-by:
Naoya Horiguchi <naoya.horiguchi@nec.com> Signed-off-by:
-
Matthew Wilcox (Oracle) authored
The generated html will link to the definition of the gfp_t automatically once we define it. Move the one-paragraph overview of GFP flags from the documentation directory into gfp.h and pull gfp.h into the documentation. This generates warnings with clang (https://lkml.kernel.org/r/20210219195509.GA59987@24bbad8f3778), so use a #if 0 to hide it from the compiler for now. Link: https://lkml.kernel.org/r/20210215204909.3824509-1-willy@infradead.org Link: https://lkml.kernel.org/r/20210220003049.GZ2858050@casper.infradead.orgSigned-off-by:
Matthew Wilcox (Oracle) <willy@infradead.org> Acked-by:
Mike Rapoport <rppt@linux.ibm.com> Cc: Nathan Chancellor <nathan@kernel.org> Signed-off-by:
-
David Hildenbrand authored
adjust_managed_page_count() as called by free_reserved_page() properly handles pages in a highmem zone, so we can reuse it for free_highmem_page(). We can now get rid of totalhigh_pages_inc() and simplify free_reserved_page(). Link: https://lkml.kernel.org/r/20210126182113.19892-3-david@redhat.comSigned-off-by:
Anshuman Khandual <anshuman.khandual@arm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org> Cc: Mike Rapoport <rppt@kernel.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Wei Yang <richard.weiyang@linux.alibaba.com> Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
-
David Hildenbrand authored
Patch series "mm: simplify free_highmem_page() and free_reserved_page()". Let's simplify and unify free_highmem_page() and free_reserved_page(). This patch (of 2): This function is never used and it is one of the last remaining user of __free_reserved_page(). Let's just drop it. Link: https://lkml.kernel.org/r/20210126182113.19892-1-david@redhat.com Link: https://lkml.kernel.org/r/20210126182113.19892-2-david@redhat.com Fixes: ffd29195 ("drivers/video/acornfb.c: remove dead code") Signed-off-by:
-
Baoquan He authored
Local variable 'zone_start_pfn' is not needed since there's only one call site in free_area_init_core(). Let's remove it and pass zone->zone_start_pfn directly to init_currently_empty_zone(). Link: https://lkml.kernel.org/r/20210122135956.5946-6-bhe@redhat.comSigned-off-by:
Baoquan He <bhe@redhat.com> Reviewed-by:
-
Baoquan He authored
Parameter 'zone' has got needed information, let's remove other unnecessary parameters. Link: https://lkml.kernel.org/r/20210122135956.5946-5-bhe@redhat.comSigned-off-by:
-
Baoquan He authored
As David suggested, simply passing 'struct zone *zone' is enough. We can get all needed information from 'struct zone*' easily. Link: https://lkml.kernel.org/r/20210122135956.5946-4-bhe@redhat.comSigned-off-by:
-
Baoquan He authored
The current memmap_init_zone() only handles memory region inside one zone, actually memmap_init() does the memmap init of one zone. So rename both of them accordingly. Link: https://lkml.kernel.org/r/20210122135956.5946-3-bhe@redhat.comSigned-off-by:
-
Baoquan He authored
Patch series "mm: clean up names and parameters of memmap_init_xxxx functions", v5. This patchset corrects inappropriate function names of memmap_init_xxx, and simplify parameters of functions in the code flow. And also fix a prototype warning reported by lkp. This patch (of 5); Kernel test robot calling make with 'W=1' is triggering warning like below for memmap_init_zone() function. mm/page_alloc.c:6259:23: warning: no previous prototype for 'memmap_init_zone' [-Wmissing-prototypes] 6259 | void __meminit __weak memmap_init_zone(unsigned long size, int nid, | ^~~~~~~~~~~~~~~~ Fix it by adding the function declaration in include/linux/mm.h. Since memmap_init_zone() has a generic version with '__weak', the declaratoin in ia64 header file can be simply removed. Link: https://lkml.kernel.org/r/20210122135956.5946-1-bhe@redhat.com Link: https://lkml.kernel.org/r/20210122135956.5946-2-bhe@redhat.comSigned-off-by:kernel test robot <lkp@intel.com> Reviewed-by:
-
Andrey Konovalov authored
Don't run KASAN tests when it's disabled with kasan.mode=off to avoid corrupting kernel memory. Link: https://linux-review.googlesource.com/id/I6447af436a69a94bfc35477f6bf4e2122948355e Link: https://lkml.kernel.org/r/25bd4fb5cae7b421d806a1f33fb633edd313f0c7.1610733117.git.andreyknvl@google.comSigned-off-by:
Andrey Konovalov <andreyknvl@google.com> Reviewed-by:
Marco Elver <elver@google.com> Reviewed-by:
Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Peter Collingbourne <pcc@google.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Andrey Konovalov authored
Add a test for kmem_cache_alloc/free_bulk to make sure there are no false-positives when these functions are used. Link: https://linux-review.googlesource.com/id/I2a8bf797aecf81baeac61380c567308f319e263d Link: https://lkml.kernel.org/r/418122ebe4600771ac81e9ca6eab6740cf8dcfa1.1610733117.git.andreyknvl@google.comSigned-off-by:
-
Andrey Konovalov authored
The currently existing page allocator tests rely on kmalloc fallback with large sizes that is only present for SLUB. Add proper tests that use alloc/free_pages(). Link: https://linux-review.googlesource.com/id/Ia173d5a1b215fe6b2548d814ef0f4433cf983570 Link: https://lkml.kernel.org/r/a2648930e55ff75b8e700f2e0d905c2b55a67483.1610733117.git.andreyknvl@google.comSigned-off-by:
-
Andrey Konovalov authored
The currently existing kasan_check_read/write() annotations are intended to be used for kernel modules that have KASAN compiler instrumentation disabled. Thus, they are only relevant for the software KASAN modes that rely on compiler instrumentation. However there's another use case for these annotations: ksize() checks that the object passed to it is indeed accessible before unpoisoning the whole object. This is currently done via __kasan_check_read(), which is compiled away for the hardware tag-based mode that doesn't rely on compiler instrumentation. This leads to KASAN missing detecting some memory corruptions. Provide another annotation called kasan_check_byte() that is available for all KASAN modes. As the implementation rename and reuse kasan_check_invalid_free(). Use this new annotation in ksize(). To avoid having ksize() as the top frame in the reported stack trace pass _RET_IP_ to __kasan_check_byte(). Also add a new ksize_uaf() test that checks that a use-after-free is detected via ksize() itself, and via plain accesses that happen later. Link: https://linux-review.googlesource.com/id/Iaabf771881d0f9ce1b969f2a62938e99d3308ec5 Link: https://lkml.kernel.org/r/f32ad74a60b28d8402482a38476f02bb7600f620.1610733117.git.andreyknvl@google.comSigned-off-by:
-
Andrey Konovalov authored
Generic mm functions that call KASAN annotations that might report a bug pass _RET_IP_ to them as an argument. This allows KASAN to include the name of the function that called the mm function in its report's header. Now that KASAN has inline wrappers for all of its annotations, move _RET_IP_ to those wrappers to simplify annotation call sites. Link: https://linux-review.googlesource.com/id/I8fb3c06d49671305ee184175a39591bc26647a67 Link: https://lkml.kernel.org/r/5c1490eddf20b436b8c4eeea83fce47687d5e4a4.1610733117.git.andreyknvl@google.comSigned-off-by:
-
Andrey Konovalov authored
Since the hardware tag-based KASAN mode might not have a redzone that comes after an allocated object (when kasan.mode=prod is enabled), the kasan_bitops_tags() test ends up corrupting the next object in memory. Change the test so it always accesses the redzone that lies within the allocated object's boundaries. Link: https://linux-review.googlesource.com/id/I67f51d1ee48f0a8d0fe2658c2a39e4879fe0832a Link: https://lkml.kernel.org/r/7d452ce4ae35bb1988d2c9244dfea56cf2cc9315.1610733117.git.andreyknvl@google.comSigned-off-by:
-
Andrey Konovalov authored
In the kmalloc_uaf2() test, the pointers to the two allocated memory blocks might happen to be the same, and the test will fail. With the software tag-based mode, the probability of the that is 1/254, so it's hard to observe the failure. For the hardware tag-based mode though, the probablity is 1/14, which is quite noticable. Allow up to 16 attempts at generating different tags for the tag-based modes. Link: https://linux-review.googlesource.com/id/Ibfa458ef2804ff465d8eb07434a300bf36388d55 Link: https://lkml.kernel.org/r/9cd5cf2f633dcbf55cab801cd26845d2b075cec7.1610733117.git.andreyknvl@google.comSigned-off-by:
-
