Xfstests 83 really stresses our ENOSPC since it uses a 100mb fs which ends up
with the mixed block group stuff.  Because of this we can run into a situation
where we don't have enough space to delete inodes, or even worse we can't free
the inodes when we next mount the fs which causes the orphan code to lose its
mind.  So if we fail to make our reservation, steal from the global reserve.
The global reserve will end up taking up the entire rest of the free space on
the fs in this worst case so there really is no other option.  With this patch
test 83 doesn't freak out.  Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>

While looking for a performance regression a user was complaining about, I
noticed that we had a regression with the varmail test of filebench.  This was
introduced by

0d10ee2e

which keeps us from calling writepages in writepage.  This is a correct change,
however it happens to help the varmail test because we write out in larger
chunks.  This is largly to do with how we write out dirty pages for each
transaction.  If you run filebench with

load varmail
set $dir=/mnt/btrfs-test
run 60

prior to this patch you would get ~1420 ops/second, but with the patch you get
~1200 ops/second.  This is a 16% decrease.  So since we know the range of dirty
pages we want to write out, don't write out in one page chunks, write out in
ranges.  So to do this we call filemap_fdatawrite_range() on the range of bytes.
Then we convert the DIRTY extents to NEED_WAIT extents.  When we then call
btrfs_wait_marked_extents() we only have to filemap_fdatawait_range() on that
range and clear the NEED_WAIT extents.  This doesn't get us back to our original
speeds, but I've been seeing ~1380 ops/second, which is a <5% regression as
opposed to a >15% regression.  That is acceptable given that the original commit
greatly reduces our latency to begin with.  Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>

If I have a range where I know a certain bit is and I want to set it to another
bit the only option I have is to call set and then clear bit, which will result
in 2 tree searches.  This is inefficient, so introduce convert_extent_bit which
will go through and set the bit I want and clear the old bit I don't want.
Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>

There is a bug that may lead to early ENOSPC in our reservation code.  We've
been checking against num_bytes which may be above and beyond what we want to
actually reserve, which could give us a false ENOSPC.  Fix this by making sure
the unused space is above how much we want to reserve and not how much we're
trying to flush.  Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>

In fixing how we deal with bad inodes, we had a regression in the orphan cleanup
code, since it expects to get a bad inode back.  So fix it to deal with getting
-ESTALE back by deleting the orphan item manually and moving on.  Thanks,
Reported-by: Simon Kirby <sim@hostway.ca>
Signed-off-by: Josef Bacik <josef@redhat.com>

Johannes pointed out we were allocating only kernel pages for doing writes,
which is kind of a big deal if you are on 32bit and have more than a gig of ram.
So fix our allocations to use the mapping's gfp but still clear __GFP_FS so we
don't re-enter.  Thanks,
Reported-by: Johannes Weiner <jweiner@redhat.com>
Signed-off-by: Josef Bacik <josef@redhat.com>

I kept getting warnings from evict because we were calling
btrfs_start_transaction() with a transaction already started when doing a
balance.  This is because we remove a block group which requires a transaction,
and the put the last reference on the cache inode.  Instead of doing this we
need to delay the iput so it is done not within a transaction having started.
This gets rid of our warnings.  Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>

Checksums are charged in 2 different ways.  The first case is when we're writing
to the disk, we account for the new checksums with the delalloc block rsv.  In
order for this to work we check if we're allocating a block for the csum root
and if trans->block_rsv == the delalloc block rsv.  But when we're deleting the
csums because of cow, this is charged to the global block rsv, and is done when
we run the delayed refs.  So we need to make sure that trans->block_rsv == NULL
when running the delayed refs.  So set it to NULL and reset it in
should_end_transaction, and set it to NULL in commit_transaction.  This got rid
of the ridiculous amount of warnings I was seeing when trying to do a balance.
Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>

The only thing that we need to have a trans handle for is in
reserve_metadata_bytes and thats to know how much flushing we can do.  So
instead of passing it around, just check current->journal_info for a
trans_handle so we know if we can commit a transaction to try and free up space
or not.  Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>

Since the durable block rsv stuff has been killed there is no need to get the
block_rsv in btrfs_free_tree_block anymore.
Signed-off-by: Josef Bacik <josef@redhat.com>

The alloc warnings everybody has been seeing is because we have been reserving
space for csums, but we weren't actually using that space.  So make
get_block_rsv() return the trans->block_rsv if we're modifying the csum root.
Also set the trans->block_rsv to NULL so that if we modify the csum root when
running delayed ref's that comes out of the global reserve like it's supposed
to.  With this patch I'm not seeing those alloc warnings anymore.  Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>

Since free space inodes now use normal checksumming we need to make sure to
account for their metadata use.  So reserve metadata space, and then if we fail
to write out the metadata we can just release it, otherwise it will be freed up
when the io completes.  Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>

In moving some enospc stuff around I noticed that when we unmount we are often
evicting the free space cache inodes before we do our last commit.  This isn't
bad, but it makes us constantly have to re-read the inodes back.  So instead
don't evict the cache until after we do our last commit, this will make things a
little less crappy and makes a future enospc change work properly.  Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>

While debugging a different issue I noticed that we were always reserving space
when we tried to use our truncate block rsv's.  This is because they didn't have
a ->size value, so use_block_rsv just assumes there is nothing reserved and it
does a reserve_metadata_bytes.  This is because btrfs_check_block_rsv() doesn't
actually add to the size of the block rsv.  That seems to be the right thing to
do so set ->size to the minimum truncate size we need, since we will always only
refill to that size anyway, and this way everything works out correctly.
Signed-off-by: Josef Bacik <josef@redhat.com>

If we have to emergency reserve space we need to not increase the block_rsv
size, otherwise we'll leak space.  Take for instance delalloc, say we reserve
4k, and we use that 4k, and then we have to emergency allocate another 4k, we
bump the size up to 8k, however we've only accounted for 4k in reservations in
all of our supporting logic, so we'll go to free the 4k and end up having a size
of 4k, which will cause us to later not free as much space.  I saw this doing
testing where I wasn't reserving enough space for something but was still
leaking space, very frustrating.  Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>

When changing back to using a spin_lock to protect the extent counters I decided
that since we would only be dropping our original extent, it was ok to just drop
the extent and return.  However since somebody else could have come in and done
a reservation, we need to do the normal song and dance to clear the reservation
out properly.  So calculate how much space we need to free, and then subtract
what we just attempted to reserve.  If it's more then we know we need to drop
those bytes from the delalloc block rsv.  Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>

We are setting ins_len to 1 even tho we are just modifying an item that should
be there already.  This may cause the search stuff to split nodes on the way
down needelessly.  Set this to 0 since we aren't inserting anything.  Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>

If you run xfstest 224 it you will get lots of messages about not being able to
delete inodes and that they will be cleaned up next mount.  This is because
btrfs_block_rsv_check was not calling reserve_metadata_bytes with the ability to
flush, so if there was not enough space, it simply failed.  But in truncate and
evict case we could easily flush space to try and get enough space to do our
work, so make btrfs_block_rsv_check take a flush argument to pass down to
reserve_metadata_bytes.  Now xfstests 224 runs fine without all those
complaints.  Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>

With btrfs_truncate_inode_items we always return if we have to go to another
leaf, which makes us do our reservation again.  This means we will only ever
modify one leaf at a time, so we only need 1 items worth of slack space.  Also,
since we are deleting we will not be creating nodes as we go down, if anything
we'll be free'ing them as we merge them together, so make a different
calculation for truncate which will only have the worst case useage of COW'ing
the entire path down to the leaf.  Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>

Lukas found a problem where if he tries to fallocate over the same region twice
and the first fallocate took up all the space we would fail with ENOSPC.  This
is because we reserve the total space we want to use for fallocate, regardless
of wether or not we will have to actually preallocate.  So instead move the
check into the loop where we actually have to do the preallocate.  Thanks,
Tested-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Josef Bacik <josef@redhat.com>

Since we've optimized the truncate path, we no longer require this function.
Signed-off-by: Josef Bacik <josef@redhat.com>

Currently we're starting and stopping a transaction for no real reason, so kill
that and just reserve enough space as if we can truncate all in one transaction.
Also use btrfs_block_rsv_check() for our reserve to minimize the amount of space
we may have to allocate for our slack space.  Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>

We will try and reserve metadata bytes in btrfs_block_rsv_check and if we cannot
because we have a transaction open it will return EAGAIN, so we do not need to
try and commit the transaction again.
Signed-off-by: Josef Bacik <josef@redhat.com>

The priority and refill_used flags are not used anymore, and neither is the
usage counter, so just remove them from btrfs_block_rsv.
Signed-off-by: Josef Bacik <josef@redhat.com>

A user reported getting spammed when moving to 3.0 by this message.  Since we
switched to the normal checksumming infrastructure all old free space caches
will be wrong and need to be regenerated so people are likely to see this
message a lot, so ratelimit it so it doesn't fill up their logs and freak them
out.  Thanks,
Reported-by: Andrew Lutomirski <luto@mit.edu>
Signed-off-by: Josef Bacik <josef@redhat.com>

I converted btrfs_truncate to do sane reservations for truncate, but didn't
convert btrfs_evict_inode.  Basically we need to save the orphan_rsv for
deleting the orphan item, and do normal reservations for our truncate.  Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>

This is confusing code and isn't used by anything anymore, so delete it.
Signed-off-by: Josef Bacik <josef@redhat.com>

This patch kills off the calculation for the amount of space needed for the
orphan operations during a snapshot.  The thing is we only do snapshots on
commit, so any space that is in the block_rsv->freed[] isn't going to be in the
new snapshot anyway, so there isn't any reason to require that space to be
reserved for the snapshot to occur.  Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>

We have not been reserving enough space for checksums.  We were just reserving
bytes for the checksum items themselves, we were not taking into account having
to cow the tree and such.  This patch adds a csum_bytes counter to the inode for
keeping track of the number of bytes outstanding we have for checksums.  Then we
calculate how many leaves would be required for the checksums we are given and
use that to reserve space.  This adds a significant amount of bytes to our
reservations, but we will handle this later.  Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>

We always look for delalloc bytes in our io_tree so we can fill in delalloc.
This is fine in most cases, but if we're writing out the btree_inode this is
just a superfluous tree search on the io_tree, and if we have a lot of metadata
dirty this could be an expensive check.  So instead check to see if our io_tree
has a ->fill_delalloc op, and if not don't even bother doing the lookup.
Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>

We have been using bytes_reserved for metadata reservations, which is wrong
since we use that to keep track of outstanding reservations from the allocator.
This resulted in us doing a lot of silly things to make sure we don't allocate a
bunch of metadata chunks since we never had a real view of how much space was
actually in use by metadata.

This passes Arne's enospc test and xfstests as well as my own enospc tests.
Hopefully this will get us moving in the right direction.  Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>

We've only been able to mount with subvol=<whatever> where whatever was a subvol
within whatever root we had as the default.  This allows us to mount -o
subvol=path/to/subvol/you/want relative from the normal fs_tree root.  Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>

Currently what we do is just wrong.  We either

1) Alloc a new "root" dentry with sb->s_root as it's parent which is just wrong
as we could walk into this subvol later on via another path and hilarity could
ensue.  Also we don't check the return value of d_splice_alias which isn't good
either.

or

2) Do a d_find_alias() which we could have lost our dentry from cache at this
point and found nothing.

So use d_obtain_alias().  In the case that we already have the inode/dentry in
cache we will get the correct dentry.  If not we will get a disconnected dentry
tree so if we walk into it later on everything will be connected up properly.
Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>

reserved_bytes is not used for anything in the inode, remove it.
Signed-off-by: Josef Bacik <josef@redhat.com>

Moving things around to give us better packing in the btrfs_inode.  This reduces
the size of our inode by 8 bytes.  Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>

* git://github.com/davem330/net:
  pch_gbe: Fixed the issue on which a network freezes
  pch_gbe: Fixed the issue on which PC was frozen when link was downed.
  make PACKET_STATISTICS getsockopt report consistently between ring and non-ring
  net: xen-netback: correctly restart Tx after a VM restore/migrate
  bonding: properly stop queuing work when requested
  can bcm: fix incomplete tx_setup fix
  RDSRDMA: Fix cleanup of rds_iw_mr_pool
  net: Documentation: Fix type of variables
  ibmveth: Fix oops on request_irq failure
  ipv6: nullify ipv6_ac_list and ipv6_fl_list when creating new socket
  cxgb4: Fix EEH on IBM P7IOC
  can bcm: fix tx_setup off-by-one errors
  MAINTAINERS: tehuti: Alexander Indenbaum's address bounces
  dp83640: reduce driver noise
  ptp: fix L2 event message recognition

* 'fix/asoc' of git://github.com/tiwai/sound:
  ASoC: omap_mcpdm_remove cannot be __devexit
  ASoC: Fix setting update bits for WM8753_LADC and WM8753_RADC
  ASoC: use a valid device for dev_err() in Zylonite

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/radeon/kms: fix channel_remap setup (v2)
  drm/radeon: Set cursor x/y to 0 when x/yorigin > 0.
  drm/radeon: Update AVIVO cursor coordinate origin before x/yorigin calculation.
  drm/radeon: Simplify cursor x/yorigin calculation.
  drm/radeon/kms: fix cursor image off-by-one error
  drm/radeon/kms: Fix logic error in DP HPD handler
  drm/radeon/kms: add retry limits for native DP aux defer
  drm/radeon/kms: fix regression in DP aux defer handling

* 'spi/merge' of git://git.secretlab.ca/git/linux-2.6:
  spi-topcliff-pch: Fix overrun issue
  spi-topcliff-pch: Add recovery processing in case FIFO overrun error occurs
  spi-topcliff-pch: Fix CPU read complete condition issue
  spi-topcliff-pch: Fix SSN Control issue
  spi-topcliff-pch: add tx-memory clear after complete transmitting