- 06 Apr, 2016 40 commits
-
-
Thomas Hellstrom authored
BugLink: http://bugs.launchpad.net/bugs/1553179 commit fb89ac51 upstream. With CONFIG_SMP=n and CONFIG_DEBUG_SPINLOCK=y the vmwgfx kernel module would unconditionally throw a bug when checking for a held spinlock in the command buffer code. Fix this by using a lockdep check. Reported-and-tested-by:
Tetsuo Handa <penguin-kernel@i-love-sakura.ne.jp> Signed-off-by:
Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by:
Sinclair Yeh <syeh@vmware.com> Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Tim Gardner <tim.gardner@canonical.com>
-
Michael S. Tsirkin authored
BugLink: http://bugs.launchpad.net/bugs/1553179 commit 2989be09 upstream. KASan detected a use-after-free error in virtio-pci remove code. In virtio_pci_remove(), vp_dev is still used after being freed in unregister_virtio_device() (in virtio_pci_release_dev() more precisely). To fix, keep a reference until cleanup is done. Fixes: 63bd62a0 ("virtio_pci: defer kfree until release callback") Reported-by:
Jerome Marchand <jmarchan@redhat.com> Cc: Sasha Levin <sasha.levin@oracle.com> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Tested-by:
-
Minchan Kim authored
BugLink: http://bugs.launchpad.net/bugs/1553179 commit 21ea9fb6 upstream. In balloon_page_dequeue, pages_lock should cover the loop (ie, list_for_each_entry_safe). Otherwise, the cursor page could be isolated by compaction and then list_del by isolation could poison the page->lru.{prev,next} so the loop finally could access wrong address like this. This patch fixes the bug. general protection fault: 0000 [#1] SMP Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 2 PID: 82 Comm: vballoon Not tainted 4.4.0-rc5-mm1-access_bit+ #1906 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 task: ffff8800a7ff0000 ti: ffff8800a7fec000 task.ti: ffff8800a7fec000 RIP: 0010:[<ffffffff8115e754>] [<ffffffff8115e754>] balloon_page_dequeue+0x54/0x130 RSP: 0018:ffff8800a7fefdc0 EFLAGS: 00010246 RAX: ffff88013fff9a70 RBX: ffffea000056fe00 RCX: 0000000000002b7d RDX: ffff88013fff9a70 RSI: ffffea000056fe00 RDI: ffff88013fff9a68 RBP: ffff8800a7fefde8 R08: ffffea000056fda0 R09: 0000000000000000 R10: ffff8800a7fefd90 R11: 0000000000000001 R12: dead0000000000e0 R13: ffffea000056fe20 R14: ffff880138809070 R15: ffff880138809060 FS: 0000000000000000(0000) GS:ffff88013fc40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00007f229c10e000 CR3: 00000000b8b53000 CR4: 00000000000006a0 Stack: 0000000000000100 ffff880138809088 ffff880138809000 ffff880138809060 0000000000000046 ffff8800a7fefe28 ffffffff812c86d3 ffff880138809020 ffff880138809000 fffffffffff91900 0000000000000100 ffff880138809060 Call Trace: [<ffffffff812c86d3>] leak_balloon+0x93/0x1a0 [<ffffffff812c8bc7>] balloon+0x217/0x2a0 [<ffffffff8143739e>] ? __schedule+0x31e/0x8b0 [<ffffffff81078160>] ? abort_exclusive_wait+0xb0/0xb0 [<ffffffff812c89b0>] ? update_balloon_stats+0xf0/0xf0 [<ffffffff8105b6e9>] kthread+0xc9/0xe0 [<ffffffff8105b620>] ? kthread_park+0x60/0x60 [<ffffffff8143b4af>] ret_from_fork+0x3f/0x70 [<ffffffff8105b620>] ? kthread_park+0x60/0x60 Code: 8d 60 e0 0f 84 af 00 00 00 48 8b 43 20 a8 01 75 3b 48 89 d8 f0 0f ba 28 00 72 10 48 8b 03 f6 c4 08 75 2f 48 89 df e8 8c 83 f9 ff <49> 8b 44 24 20 4d 8d 6c 24 20 48 83 e8 20 4d 39 f5 74 7a 4c 89 RIP [<ffffffff8115e754>] balloon_page_dequeue+0x54/0x130 RSP <ffff8800a7fefdc0> ---[ end trace 43cf28060d708d5f ]--- Kernel panic - not syncing: Fatal exception Dumping ftrace buffer: (ftrace buffer empty) Kernel Offset: disabled Signed-off-by:
Minchan Kim <minchan@kernel.org> Signed-off-by:
Rafael Aquini <aquini@redhat.com> Signed-off-by:
-
Minchan Kim authored
BugLink: http://bugs.launchpad.net/bugs/1553179 commit f68b992b upstream. During my compaction-related stuff, I encountered a bug with ballooning. With repeated inflating and deflating cycle, guest memory( ie, cat /proc/meminfo | grep MemTotal) is decreased and couldn't be recovered. The reason is balloon_lock doesn't cover release_pages_balloon so struct virtio_balloon fields could be overwritten by race of fill_balloon(e,g, vb->*pfns could be critical). This patch fixes it in my test. Signed-off-by:
-
Henry Chen authored
BugLink: http://bugs.launchpad.net/bugs/1553179 commit aab3c3f3 upstream. This patch fix the below build error: drivers/regulator/mt6311-regulator.c:111: undefined reference to `__devm_regmap_init_i2c' Signed-off-by:
Henry Chen <henryc.chen@mediatek.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Chen-Yu Tsai authored
BugLink: http://bugs.launchpad.net/bugs/1553179 commit 3cb99e2e upstream. The enable/disable values for GPIO LDOs are reversed. It seems no one noticed as AXP22x support was introduced recently, and no one was using the GPIO LDOs, either because no designs actually use them or board support hasn't caught up. Fixes: 1b82b4e4 ("regulator: axp20x: Add support for AXP22X regulators") Signed-off-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
-
Marek Szyprowski authored
BugLink: http://bugs.launchpad.net/bugs/1553179 commit 6b4feaea upstream. It is allowed to enable/disable clocks from interrupts, so common Exynos ARM clock management code for CPUfreq should use 'irqsave' version of spin_lock calls to avoid potential deadlock caused by spin_lock recursion. The same spin_lock is used by gate/mux clocks during enable/disable calls. This deadlock, can be reproduced by enabling CPUfreq (ondemand or userspace) and decoding video with s5p-mfc driver. Relevant stack trace: [ 5928.061534] BUG: spinlock recursion on CPU#0, bash/1252 [ 5928.061609] lock: 0xee80454c, .magic: dead4ead, .owner: bash/1252, .owner_cpu: 0 [ 5928.068586] CPU: 0 PID: 1252 Comm: bash Tainted: G W 4.4.0-rc4-00001-g447a7fd #678 [ 5928.077260] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 5928.083359] [<c00153dc>] (unwind_backtrace) from [<c00121b4>] (show_stack+0x10/0x14) [ 5928.091072] [<c00121b4>] (show_stack) from [<c0213e28>] (dump_stack+0x68/0xb8) [ 5928.098275] [<c0213e28>] (dump_stack) from [<c005c1ec>] (do_raw_spin_lock+0x184/0x1ac) [ 5928.106177] [<c005c1ec>] (do_raw_spin_lock) from [<c05cfa98>] (_raw_spin_lock_irqsave+0x20/0x28) [ 5928.114943] [<c05cfa98>] (_raw_spin_lock_irqsave) from [<c0468698>] (clk_gate_endisable+0x24/0x98) [ 5928.123882] [<c0468698>] (clk_gate_endisable) from [<c0464d40>] (clk_core_disable+0x60/0x84) [ 5928.132299] [<c0464d40>] (clk_core_disable) from [<c0465e00>] (clk_disable+0x24/0x30) [ 5928.140117] [<c0465e00>] (clk_disable) from [<c03f3b80>] (s5p_mfc_handle_frame+0x254/0x860) [ 5928.148445] [<c03f3b80>] (s5p_mfc_handle_frame) from [<c03f4b34>] (s5p_mfc_irq+0x890/0xa24) [ 5928.156778] [<c03f4b34>] (s5p_mfc_irq) from [<c00627bc>] (handle_irq_event_percpu+0x50/0x14c) [ 5928.165283] [<c00627bc>] (handle_irq_event_percpu) from [<c00628f0>] (handle_irq_event+0x38/0x5c) [ 5928.174143] [<c00628f0>] (handle_irq_event) from [<c0065864>] (handle_fasteoi_irq+0xdc/0x1a4) [ 5928.182645] [<c0065864>] (handle_fasteoi_irq) from [<c0062090>] (generic_handle_irq+0x18/0x28) [ 5928.191236] [<c0062090>] (generic_handle_irq) from [<c00621a4>] (__handle_domain_irq+0x6c/0xdc) [ 5928.199917] [<c00621a4>] (__handle_domain_irq) from [<c0009470>] (gic_handle_irq+0x4c/0x98) [ 5928.208249] [<c0009470>] (gic_handle_irq) from [<c0012c54>] (__irq_svc+0x54/0x90) [ 5928.215709] Exception stack(0xeddb5cb8 to 0xeddb5d00) [ 5928.220745] 5ca0: ee80454c faddfadc [ 5928.228906] 5cc0: 00000000 01000001 ee831ce0 f8114200 ee807c00 01130520 00000403 eddb5d84 [ 5928.237063] 5ce0: ee807c48 2faf0800 ee807c0c eddb5d08 c046b618 c046b634 20000053 ffffffff [ 5928.245225] [<c0012c54>] (__irq_svc) from [<c046b634>] (exynos_cpuclk_notifier_cb+0x170/0x270) [ 5928.253823] [<c046b634>] (exynos_cpuclk_notifier_cb) from [<c003cb58>] (notifier_call_chain+0x44/0x84) [ 5928.263106] [<c003cb58>] (notifier_call_chain) from [<c003ccd4>] (__srcu_notifier_call_chain+0x6c/0x9c) [ 5928.272480] [<c003ccd4>] (__srcu_notifier_call_chain) from [<c003cd1c>] (srcu_notifier_call_chain+0x18/0x20) [ 5928.282288] [<c003cd1c>] (srcu_notifier_call_chain) from [<c0464ed0>] (__clk_notify+0x6c/0x74) [ 5928.290881] [<c0464ed0>] (__clk_notify) from [<c0465388>] (clk_propagate_rate_change+0xa0/0xac) [ 5928.299561] [<c0465388>] (clk_propagate_rate_change) from [<c0465378>] (clk_propagate_rate_change+0x90/0xac) [ 5928.309370] [<c0465378>] (clk_propagate_rate_change) from [<c04666fc>] (clk_core_set_rate_nolock+0x64/0xa8) [ 5928.319091] [<c04666fc>] (clk_core_set_rate_nolock) from [<c0466760>] (clk_set_rate+0x20/0x30) [ 5928.327686] [<c0466760>] (clk_set_rate) from [<c0428c70>] (set_target+0xe8/0x23c) [ 5928.335152] [<c0428c70>] (set_target) from [<c04244d0>] (__cpufreq_driver_target+0x184/0x29c) [ 5928.343655] [<c04244d0>] (__cpufreq_driver_target) from [<c0427128>] (cpufreq_set+0x44/0x64) [ 5928.352074] [<c0427128>] (cpufreq_set) from [<c0423948>] (store_scaling_setspeed+0x5c/0x74) [ 5928.360407] [<c0423948>] (store_scaling_setspeed) from [<c04238d0>] (store+0x7c/0x98) [ 5928.368221] [<c04238d0>] (store) from [<c0132540>] (sysfs_kf_write+0x44/0x48) [ 5928.375338] [<c0132540>] (sysfs_kf_write) from [<c0131b9c>] (kernfs_fop_write+0xb8/0x1bc) [ 5928.383496] [<c0131b9c>] (kernfs_fop_write) from [<c00d71f8>] (__vfs_write+0x2c/0xd4) [ 5928.391308] [<c00d71f8>] (__vfs_write) from [<c00d7de8>] (vfs_write+0xa0/0x144) [ 5928.398598] [<c00d7de8>] (vfs_write) from [<c00d8048>] (SyS_write+0x44/0x84) [ 5928.405631] [<c00d8048>] (SyS_write) from [<c000f540>] (ret_fast_syscall+0x0/0x3c) Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
-
Dmitry V. Levin authored
BugLink: http://bugs.launchpad.net/bugs/1553179 commit 525fd5a9 upstream. The value returned by sys_personality has type "long int". It is saved to a variable of type "int", which is not a problem yet because the type of task_struct->pesonality is "unsigned int". The problem is the sign extension from "int" to "long int" that happens on return from sys_sparc64_personality. For example, a userspace call personality((unsigned) -EINVAL) will result to any subsequent personality call, including absolutely harmless read-only personality(0xffffffff) call, failing with errno set to EINVAL. Signed-off-by:
Dmitry V. Levin <ldv@altlinux.org> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Borislav Petkov authored
BugLink: http://bugs.launchpad.net/bugs/1553179 commit 12e26969 upstream. I get the splat below when modprobing/rmmoding EDAC drivers. It happens because bus->name is invalid after bus_unregister() has run. The Code: section below corresponds to: .loc 1 1108 0 movq 672(%rbx), %rax # mci_1(D)->bus, mci_1(D)->bus .loc 1 1109 0 popq %rbx # .loc 1 1108 0 movq (%rax), %rdi # _7->name, jmp kfree # and %rax has some funky stuff 2030203020312030 which looks a lot like something walked over it. Fix that by saving the name ptr before doing stuff to string it points to. general protection fault: 0000 [#1] SMP Modules linked in: ... CPU: 4 PID: 10318 Comm: modprobe Tainted: G I EN 3.12.51-11-default+ #48 Hardware name: HP ProLiant DL380 G7, BIOS P67 05/05/2011 task: ffff880311320280 ti: ffff88030da3e000 task.ti: ffff88030da3e000 RIP: 0010:[<ffffffffa019da92>] [<ffffffffa019da92>] edac_unregister_sysfs+0x22/0x30 [edac_core] RSP: 0018:ffff88030da3fe28 EFLAGS: 00010292 RAX: 2030203020312030 RBX: ffff880311b4e000 RCX: 000000000000095c RDX: 0000000000000001 RSI: ffff880327bb9600 RDI: 0000000000000286 RBP: ffff880311b4e750 R08: 0000000000000000 R09: ffffffff81296110 R10: 0000000000000400 R11: 0000000000000000 R12: ffff88030ba1ac68 R13: 0000000000000001 R14: 00000000011b02f0 R15: 0000000000000000 FS: 00007fc9bf8f5700(0000) GS:ffff8801a7c40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000403c90 CR3: 000000019ebdf000 CR4: 00000000000007e0 Stack: Call Trace: i7core_unregister_mci.isra.9 i7core_remove pci_device_remove __device_release_driver driver_detach bus_remove_driver pci_unregister_driver i7core_exit SyS_delete_module system_call_fastpath 0x7fc9bf426536 Code: 2e 0f 1f 84 00 00 00 00 00 66 66 66 66 90 53 48 89 fb e8 52 2a 1f e1 48 8b bb a0 02 00 00 e8 46 59 1f e1 48 8b 83 a0 02 00 00 5b <48> 8b 38 e9 26 9a fe e0 66 0f 1f 44 00 00 66 66 66 66 90 48 8b RIP [<ffffffffa019da92>] edac_unregister_sysfs+0x22/0x30 [edac_core] RSP <ffff88030da3fe28> Signed-off-by:
Borislav Petkov <bp@suse.de> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Fixes: 7a623c03 ("edac: rewrite the sysfs code to use struct device") Signed-off-by:
-
Borislav Petkov authored
BugLink: http://bugs.launchpad.net/bugs/1553179 commit fcd5c4dd upstream. EDAC workqueue destruction is really fragile. We cancel delayed work but if it is still running and requeues itself, we still go ahead and destroy the workqueue and the queued work explodes when workqueue core attempts to run it. Make the destruction more robust by switching op_state to offline so that requeuing stops. Cancel any pending work *synchronously* too. EDAC i7core: Driver loaded. general protection fault: 0000 [#1] SMP CPU 12 Modules linked in: Supported: Yes Pid: 0, comm: kworker/0:1 Tainted: G IE 3.0.101-0-default #1 HP ProLiant DL380 G7 RIP: 0010:[<ffffffff8107dcd7>] [<ffffffff8107dcd7>] __queue_work+0x17/0x3f0 < ... regs ...> Process kworker/0:1 (pid: 0, threadinfo ffff88019def6000, task ffff88019def4600) Stack: ... Call Trace: call_timer_fn run_timer_softirq __do_softirq call_softirq do_softirq irq_exit smp_apic_timer_interrupt apic_timer_interrupt intel_idle cpuidle_idle_call cpu_idle Code: ... RIP __queue_work RSP <...> Signed-off-by:
-
James Hogan authored
BugLink: http://bugs.launchpad.net/bugs/1553179 commit f4dce1ff upstream. Since commit 4c21b8fd ("MIPS: seccomp: Handle indirect system calls (o32)"), syscall_get_arguments() attempts to handle o32 indirect syscall arguments by incrementing both the start argument number and the number of arguments to fetch. However only the start argument number needs to be incremented. The number of arguments does not change, they're just shifted up by one, and in fact the output array is provided by the caller and is likely only n entries long, so reading more arguments overflows the output buffer. In the case of seccomp, this results in it fetching 7 arguments starting at the 2nd one, which overflows the unsigned long args[6] in populate_seccomp_data(). This clobbers the $s0 register from syscall_trace_enter() which __seccomp_phase1_filter() saved onto the stack, into which syscall_trace_enter() had placed its syscall number argument. This caused Chromium to crash. Credit goes to Milko for tracking it down as far as $s0 being clobbered. Fixes: 4c21b8fd ("MIPS: seccomp: Handle indirect system calls (o32)") Reported-by:
Milko Leporis <milko.leporis@imgtec.com> Signed-off-by:
James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12213/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Huacai Chen authored
BugLink: http://bugs.launchpad.net/bugs/1553179 commit 4f33f6c5 upstream. Commit be0c37c9 (MIPS: Rearrange PTE bits into fixed positions.) defines fixed PTE bits for MIPS R2. Then, commit d7b63141 (MIPS: pgtable-bits: Fix XPA damage to R6 definitions.) adds the MIPS R6 definitions in the same way as MIPS R2. But some R6 #ifdefs in the later commit are missing, so in this patch I fix that. Signed-off-by:
Huacai Chen <chenhc@lemote.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12164/Signed-off-by:
-
Huacai Chen authored
BugLink: http://bugs.launchpad.net/bugs/1553179 commit 5610b125 upstream. This patch is borrowed from x86 hpet driver and explaind below: Due to the overly intelligent design of HPETs, we need to workaround the problem that the compare value which we write is already behind the actual counter value at the point where the value hits the real compare register. This happens for two reasons: 1) We read out the counter, add the delta and write the result to the compare register. When a NMI hits between the read out and the write then the counter can be ahead of the event already. 2) The write to the compare register is delayed by up to two HPET cycles in AMD chipsets. We can work around this by reading back the compare register to make sure that the written value has hit the hardware. But that is bad performance wise for the normal case where the event is far enough in the future. As we already know that the write can be delayed by up to two cycles we can avoid the read back of the compare register completely if we make the decision whether the delta has elapsed already or not based on the following calculation: cmp = event - actual_count; If cmp is less than 64 HPET clock cycles, then we decide that the event has happened already and return -ETIME. That covers the above #1 and #2 problems which would cause a wait for HPET wraparound (~306 seconds). Signed-off-by:
-
Huacai Chen authored
BugLink: http://bugs.launchpad.net/bugs/1553179 commit 57548432 upstream. When Core-0 handle SMP_ASK_C0COUNT IPI, we should make other cores to see the result as soon as possible (especially when Store-Fill-Buffer is enabled). Otherwise, C0_Count syncronization makes no sense. BTW, array is more suitable than per-cpu variable for syncronization, and there is a corner case should be avoid: C0_Count of Core-0 can be really 0. Signed-off-by:
-
Dan Williams authored
BugLink: http://bugs.launchpad.net/bugs/1553179 commit 800dc4f4 upstream. This reverts commit 22b14523. It was originally sent in an earlier revision of the pfn_t patchset. Besides being broken, the warning is also fixed by PFN_FLAGS_MASK casting the PAGE_MASK to an unsigned long. Reported-by:
Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Cc: linux-kernel@vger.kernel.org Cc: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/12182/Signed-off-by:
-
zengtao authored
BugLink: http://bugs.launchpad.net/bugs/1553179 commit 0f26922f upstream. The datatype __kernel_time_t is u32 on 32bit platform, so its subject to overflows in the timeval/timespec to cputime conversion. Currently the following functions are affected: 1. setitimer() 2. timer_create/timer_settime() 3. sys_clock_nanosleep This can happen on MIPS32 and ARM32 with "Full dynticks CPU time accounting" enabled, which is required for CONFIG_NO_HZ_FULL. Enforce u64 conversion to prevent the overflow. Fixes: 31c1fc81 ("ARM: Kconfig: allow full nohz CPU accounting") Signed-off-by:
zengtao <prime.zeng@huawei.com> Reviewed-by:
Arnd Bergmann <arnd@arndb.de> Cc: <fweisbec@gmail.com> Link: http://lkml.kernel.org/r/1454384314-154784-1-git-send-email-prime.zeng@huawei.comSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
David Gibson authored
BugLink: http://bugs.launchpad.net/bugs/1553179 commit 35a4933a upstream. 1e75fa8b "time: Condense timekeeper.xtime into xtime_sec" replaced a call to clocksource_cyc2ns() from timekeeping_get_ns() with an open-coded version of the same logic to avoid keeping a semi-redundant struct timespec in struct timekeeper. However, the commit also introduced a subtle semantic change - where clocksource_cyc2ns() uses purely unsigned math, the new version introduces a signed temporary, meaning that if (delta * tk->mult) has a 63-bit overflow the following shift will still give a negative result. The choice of 'maxsec' in __clocksource_updatefreq_scale() means this will generally happen if there's a ~10 minute pause in examining the clocksource. This can be triggered on a powerpc KVM guest by stopping it from qemu for a bit over 10 minutes. After resuming time has jumped backwards several minutes causing numerous problems (jiffies does not advance, msleep()s can be extended by minutes..). It doesn't happen on x86 KVM guests, because the guest TSC is effectively frozen while the guest is stopped, which is not the case for the powerpc timebase. Obviously an unsigned (64 bit) overflow will only take twice as long as a signed, 63-bit overflow. I don't know the time code well enough to know if that will still cause incorrect calculations, or if a 64-bit overflow is avoided elsewhere. Still, an incorrect forwards clock adjustment will cause less trouble than time going backwards. So, this patch removes the potential for intermediate signed overflow. Suggested-by:
Laurent Vivier <lvivier@redhat.com> Tested-by:
David Gibson <david@gibson.dropbear.id.au> Signed-off-by:
John Stultz <john.stultz@linaro.org> Signed-off-by:
-
Lukasz Duda authored
BugLink: http://bugs.launchpad.net/bugs/1553179 commit 87f5fedb upstream. This patch fixes incorrect handling of the 6lowpan packets that contain uncompressed IPv6 header. RFC4944 specifies a special dispatch for 6lowpan to carry uncompressed IPv6 header. This dispatch (1 byte long) has to be removed during reception and skb data pointer has to be moved. To correctly point in the beginning of the IPv6 header the dispatch byte has to be pulled off before packet can be processed by netif_rx_in(). Test scenario: IPv6 packets are not correctly interpreted by the network layer when IPv6 header is not compressed (e.g. ICMPv6 Echo Reply is not propagated correctly to the ICMPv6 layer because the extra byte will make the header look corrupted). Similar approach is done for IEEE 802.15.4. Signed-off-by:
Lukasz Duda <lukasz.duda@nordicsemi.no> Signed-off-by:
Glenn Ruben Bakke <glenn.ruben.bakke@nordicsemi.no> Acked-by:
Jukka Rissanen <jukka.rissanen@linux.intel.com> Signed-off-by:
Johan Hedberg <johan.hedberg@intel.com> Signed-off-by:
-
Glenn Ruben Bakke authored
BugLink: http://bugs.launchpad.net/bugs/1553179 commit 4c58f328 upstream. The fixes provided in this patch assigns a valid net_device structure to skb before dispatching it for further processing. Scenario #1: ============ Bluetooth 6lowpan receives an uncompressed IPv6 header, and dispatches it to netif. The following error occurs: Null pointer dereference error #1 crash log: [ 845.854013] BUG: unable to handle kernel NULL pointer dereference at 0000000000000048 [ 845.855785] IP: [<ffffffff816e3d36>] enqueue_to_backlog+0x56/0x240 ... [ 845.909459] Call Trace: [ 845.911678] [<ffffffff816e3f64>] netif_rx_internal+0x44/0xf0 The first modification fixes the NULL pointer dereference error by assigning dev to the local_skb in order to set a valid net_device before processing the skb by netif_rx_ni(). Scenario #2: ============ Bluetooth 6lowpan receives an UDP compressed message which needs further decompression by nhc_udp. The following error occurs: Null pointer dereference error #2 crash log: [ 63.295149] BUG: unable to handle kernel NULL pointer dereference at 0000000000000840 [ 63.295931] IP: [<ffffffffc0559540>] udp_uncompress+0x320/0x626 [nhc_udp] The second modification fixes the NULL pointer dereference error by assigning dev to the local_skb in the case of a udp compressed packet. The 6lowpan udp_uncompress function expects that the net_device is set in the skb when checking lltype. Signed-off-by:
-
Johan Hedberg authored
BugLink: http://bugs.launchpad.net/bugs/1553179 commit cff10ce7 upstream. The commit cad20c27 was supposed to fix handling of devices first using public addresses and then switching to RPAs after pairing. Unfortunately it missed a couple of key places in the code. 1. When evaluating which devices should be removed from the existing white list we also need to consider whether we have an IRK for them or not, i.e. a call to hci_find_irk_by_addr() is needed. 2. In smp_notify_keys() we should not be requiring the knowledge of the RPA, but should simply keep the IRK around if the other conditions require it. Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Dmitry Tunin authored
BugLink: http://bugs.launchpad.net/bugs/1553179 commit 1623d0bf upstream. T: Bus=03 Lev=02 Prnt=02 Port=05 Cnt=02 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0930 ProdID=0225 Rev=01.12 S: Manufacturer=Broadcom Corp S: Product=BCM43142A0 S: SerialNumber=4CBB58034671 C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none) Signed-off-by:
Dmitry Tunin <hanipouspilot@gmail.com> Signed-off-by:
-
Johan Hedberg authored
BugLink: http://bugs.launchpad.net/bugs/1553179 commit 2f99536a upstream. All LE connections are now triggered through a preceding passive scan and waiting for a connectable advertising report. This means we've got the best possible guarantee that the device is within range and should be able to request the controller to perform continuous scanning. This way we minimize the risk that we miss out on any advertising packets. Signed-off-by:
-
Adrian Hunter authored
BugLink: http://bugs.launchpad.net/bugs/1553179 commit 8d28b7a7 upstream. Drivers may need to provide their own get_cd() mmc host op, but currently the internals of the current op (sdhci_get_cd()) are provided by sdhci_do_get_cd() which is also called from sdhci_request(). To allow override of the get_cd functionality, change sdhci_request() to call ->get_cd() instead of sdhci_do_get_cd(). Note, in the future the call to ->get_cd() will likely be removed from sdhci_request() since most drivers don't need actually it. However this change is being done now to facilitate a subsequent bug fix. Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Adrian Hunter authored
BugLink: http://bugs.launchpad.net/bugs/1553179 commit bf60e592 upstream. In the past, fixes for specific hardware devices were implemented in sdhci using quirks. That approach is no longer accepted because the growing number of quirks was starting to make the code difficult to understand and maintain. One alternative to quirks, is to allow drivers to override the default mmc host operations. This patch makes it easy to do that, and it is needed for a subsequent bug fix, for which separate patches are provided. Signed-off-by:
-
Adrian Hunter authored
BugLink: http://bugs.launchpad.net/bugs/1553179 commit 163cbe31 upstream. Intel BXT/APL use a card detect GPIO however the host controller will not enable bus power unless it's card detect also reflects the presence of a card. Unfortunately those 2 things race which can result in commands not starting, after which the controller does nothing and there is a 10 second wait for the driver's 10-second timer to timeout. That is fixed by having the driver look also at the present state register to determine if the card is present. Consequently, provide a 'get_cd' mmc host operation for BXT/APL that does that. Signed-off-by:
-
Robert Jarzmik authored
BugLink: http://bugs.launchpad.net/bugs/1553179 commit 41c89159 upstream. The commit fixing the conversion of pxamci to slot-gpio API fixed the inverted the logic of the read-only gpio. Unfortunately, the commit was tested on a non-inverted gpio, and not on the inverted one. And the fix did work partially, by luck. This is the remaining missing part of the fix, trivial but still necessary. Fixes: Fixes: 26d49fe7 ("mmc: pxamci: fix read-only gpio detection polarity") Reported-by:
Andrea Adami <andrea.adami@gmail.com> Tested-by:
Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by:
-
Adrian Hunter authored
BugLink: http://bugs.launchpad.net/bugs/1553179 commit 6a645dd8 upstream. Intel BXT/APL use a card detect GPIO however the host controller will not enable bus power unless it's card detect also reflects the presence of a card. Unfortunately those 2 things race which can result in commands not starting, after which the controller does nothing and there is a 10 second wait for the driver's 10-second timer to timeout. That is fixed by having the driver look also at the present state register to determine if the card is present. Consequently, provide a 'get_cd' mmc host operation for BXT/APL that does that. Signed-off-by:
-
Linus Walleij authored
BugLink: http://bugs.launchpad.net/bugs/1553179 commit 0bcb7efd upstream. commit 4956e109 ("ARM: 6244/1: mmci: add variant data and default MCICLOCK support") added variant data for ARM, U300 and Ux500 variants. The Nomadik NHK8815/8820 variant was erroneously labeled as a U300 variant, and when the proper Nomadik variant was later introduced in commit 34fd4213 ("ARM: 7378/1: mmci: add support for the Nomadik MMCI variant") this was not fixes. Let's say this fixes the latter commit as there was no proper Nomadik support until then. Fixes: 34fd4213 ("ARM: 7378/1: mmci: add support for the Nomadik...") Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Carlo Caione authored
BugLink: http://bugs.launchpad.net/bugs/1553179 commit e10c3219 upstream. While in sdhci_execute_tuning() the choice whether or not to enable the tuning is done on the actual timing, in the mmc_sdio_init_uhs_card() the check is done on the capability of the card. This difference is causing some issues with some SDIO cards in DDR50 mode where the CDM19 is wrongly issued. With this patch we modify the check in both mmc_(sd|sdio)_init_uhs_card() functions to take the proper decision only according to the actual timing specification. Signed-off-by:
Carlo Caione <carlo@endlessm.com> Signed-off-by:
-
Adrian Hunter authored
BugLink: http://bugs.launchpad.net/bugs/1553179 commit 5c671c41 upstream. sdhci has a legacy facility to prevent runtime suspend if the bus power is on. This is needed in cases where the power to the card is dependent on the bus power. It is controlled by a pair of functions: sdhci_runtime_pm_bus_on() and sdhci_runtime_pm_bus_off(). These functions use a boolean variable 'bus_on' to ensure changes are always paired. There is an additional check for 'runtime_suspended' which is the problem. In fact, its use is ill-conceived as the only requirement for the logic is that 'on' and 'off' are paired, which is actually broken by the check, for example if the bus power is turned on during runtime resume. So remove the check. Signed-off-by:
-
Wenkai Du authored
BugLink: http://bugs.launchpad.net/bugs/1553179 commit adb24d42 upstream. Commit cc4f414c ("mmc: mmc: Add driver strength selection") added driver strength selection for eMMC HS200 and HS400 modes. That patch also set the driver stength when transitioning through High Speed mode to HS200/HS400, but driver strength is not defined for High Speed mode. While the JEDEC specification is not clear on this point it has been observed to cause problems for some eMMC, and removing the driver strength setting in this case makes it consistent with the normal use of High Speed mode. Signed-off-by:
Wenkai Du <wenkai.du@intel.com> Signed-off-by:
-
Adrian Hunter authored
BugLink: http://bugs.launchpad.net/bugs/1553179 commit d9bfbb95 upstream. The 'ocr' parameter passed to mmc_set_signal_voltage() defines the power-on voltage used when power cycling after a failure to set the voltage. However, in the case of mmc_sdio_init_card(), the value passed has the R4_18V_PRESENT flag set which is not valid for power-on and results in an invalid vdd. Fix by passing the card's ocr value which does not have the flag. Signed-off-by:
-
Adrian Hunter authored
BugLink: http://bugs.launchpad.net/bugs/1553179 commit 1ca89685 upstream. In some cases, the stronger 33 Ohm driver strength must not be used so it is not a suitable default. Change it to the standard default 50 Ohm value. The patch applies to v4.2+ except the file name changed. It is drivers/mmc/host/sdhci-pci.c prior to v.4.4. Signed-off-by:
-
Rabin Vincent authored
BugLink: http://bugs.launchpad.net/bugs/1553179 commit 05caee93 upstream. Commit bb08a7d4 ("mmc: usdhi6rol0: fix NULL pointer deref in debug print") fixed one NULL pointer dereference but unfortunately introduced another. "data" may be NULL if this is a command timeout for a command without any data, so we should only use it if we're actually waiting for data. Fixes: bb08a7d4 ("mmc: usdhi6rol0: fix NULL pointer deref in debug print") Signed-off-by:
Rabin Vincent <rabin.vincent@axis.com> Signed-off-by:
-
Alexandre Belloni authored
BugLink: http://bugs.launchpad.net/bugs/1553179 commit f02b4b72 upstream. clockevents_exchange_device is calling clockevents_shutdown() on the new clockenvents device but it may have never been enabled in the first place. This results in the tcb clock being disabled without being enabled first: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1 at drivers/clk/clk.c:680 clk_disable+0x28/0x34() Modules linked in: CPU: 0 PID: 1 Comm: swapper Not tainted 4.4.0+ #6 Hardware name: Atmel AT91SAM9 [<c000f2b8>] (unwind_backtrace) from [<c000d01c>] (show_stack+0x10/0x14) [<c000d01c>] (show_stack) from [<c00172f0>] (warn_slowpath_common+0x78/0xa0) [<c00172f0>] (warn_slowpath_common) from [<c00173a8>] (warn_slowpath_null+0x18/0x20) [<c00173a8>] (warn_slowpath_null) from [<c0361528>] (clk_disable+0x28/0x34) [<c0361528>] (clk_disable) from [<c034d560>] (tc_shutdown+0x38/0x4c) [<c034d560>] (tc_shutdown) from [<c0059ad4>] (clockevents_switch_state+0x38/0x6c) [<c0059ad4>] (clockevents_switch_state) from [<c0059b18>] (clockevents_shutdown+0x10/0x24) [<c0059b18>] (clockevents_shutdown) from [<c005a458>] (tick_check_new_device+0x84/0xac) [<c005a458>] (tick_check_new_device) from [<c0059660>] (clockevents_register_device+0x7c/0x108) [<c0059660>] (clockevents_register_device) from [<c06b5a68>] (tcb_clksrc_init+0x390/0x3e8) [<c06b5a68>] (tcb_clksrc_init) from [<c00097cc>] (do_one_initcall+0x114/0x1d4) [<c00097cc>] (do_one_initcall) from [<c069bd54>] (kernel_init_freeable+0xfc/0x1b8) [<c069bd54>] (kernel_init_freeable) from [<c04c3818>] (kernel_init+0x8/0xe0) [<c04c3818>] (kernel_init) from [<c000a410>] (ret_from_fork+0x14/0x24) ---[ end trace 0000000000000001 ]--- Check what state we were in before trying to disable the clock. Fixes: cf4541c1 ("clockevents/drivers/tcb_clksrc: Migrate to new 'set-state' interface") Signed-off-by:
Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Link: http://lkml.kernel.org/r/1452854061-30370-1-git-send-email-alexandre.belloni@free-electrons.comSigned-off-by:
-
Richard Cochran authored
BugLink: http://bugs.launchpad.net/bugs/1553179 commit 1b9f2372 upstream. The posix_clock_poll function is supposed to return a bit mask of POLLxxx values. However, in case the hardware has disappeared (due to hot plugging for example) this code returns -ENODEV in a futile attempt to throw an error at the file descriptor level. The kernel's file_operations interface does not accept such error codes from the poll method. Instead, this function aught to return POLLERR. The value -ENODEV does, in fact, contain the POLLERR bit (and almost all the other POLLxxx bits as well), but only by chance. This patch fixes code to return a proper bit mask. Credit goes to Markus Elfring for pointing out the suspicious signed/unsigned mismatch. Reported-by:
Markus Elfring <elfring@users.sourceforge.net> igned-off-by:
Richard Cochran <richardcochran@gmail.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Julia Lawall <julia.lawall@lip6.fr> Link: http://lkml.kernel.org/r/1450819198-17420-1-git-send-email-richardcochran@gmail.comSigned-off-by:
-
Ashok Kumar authored
BugLink: http://bugs.launchpad.net/bugs/1553179 commit 004fa08d upstream. When the GIC is using EOImode==1, the EOI is done immediately, leaving the deactivation to be performed when the EOI was previously done. Unfortunately, the ITS is not aware of the EOImode at all, and blindly EOIs the interrupt again. On most systems, this is ignored (despite being a programming error), but some others do raise a SError exception as there is no priority drop to perform for this interrupt. The fix is to stop trying to be clever, and always call into the underlying GIC to perform the right access, irrespective of the more we're in. [Marc: Reworked commit message] Fixes: 0b996fd3 ("irqchip/GICv3: Convert to EOImode == 1") Acked-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
Ashok Kumar <ashoks@broadcom.com> Signed-off-by:
-
Milo Kim authored
BugLink: http://bugs.launchpad.net/bugs/1553179 commit 49f34134 upstream. Atmel AIC has common structure for SMR (Source Mode Register). bit[6:5] Interrupt source type bit[2:0] Priority level Other bits are unused. To update new priority value, bit[2:0] should be cleared first and then new priority level can be written. However, aic_common_set_priority() helper clears source type bits instead of priority bits. This patch fixes wrong mask bit operation. Fixes: b1479ebb "irqchip: atmel-aic: Add atmel AIC/AIC5 drivers" Signed-off-by:
Milo Kim <milo.kim@ti.com> Acked-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Ludovic Desroches <ludovic.desroches@atmel.com> Cc: Nicholas Ferre <nicolas.ferre@atmel.com> Link: http://lkml.kernel.org/r/1452669592-3401-2-git-send-email-milo.kim@ti.comSigned-off-by:
-
Oleksij Rempel authored
BugLink: http://bugs.launchpad.net/bugs/1553179 commit c5b63520 upstream. The rework of the driver missed to move the call to set_handle_irq() into asm9260_of_init(). As a consequence no interrupt entry point is installed and no interrupts are delivered Solution is simple: Install the interrupt entry handler. Fixes: 7e4ac676 ("irqchip/mxs: Add Alphascale ASM9260 support") Signed-off-by:
Oleksij Rempel <linux@rempel-privat.de> Cc: kernel@pengutronix.de Cc: jason@lakedaemon.net Cc: marc.zyngier@arm.com Link: http://lkml.kernel.org/r/1454061473-24957-1-git-send-email-linux@rempel-privat.deSigned-off-by:
-
Sekhar Nori authored
BugLink: http://bugs.launchpad.net/bugs/1553179 commit d3b421cd upstream. Under some conditions, irq sorting procedure used by INTC can go wrong resulting in a spurious irq getting reported. If this condition is not handled, it results in endless stream of: unexpected IRQ trap at vector 00 messages from ack_bad_irq() Handle the spurious interrupt condition in omap-intc driver to prevent this. Measurements using kernel function profiler on AM335x EVM running at 720MHz show that after this patch omap_intc_handle_irq() takes about 37.4us against 34us before this patch. Signed-off-by:
Sekhar Nori <nsekhar@ti.com> Acked-by:
Tony Lindgren <tony@atomide.com> Cc: John Ogness <john.ogness@linutronix.de> Cc: Felipe Balbi <balbi@ti.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Link: http://lkml.kernel.org/r/9c78a6db02ac55f7af7371b417b6e414d2c3095b.1450188128.git.nsekhar@ti.comSigned-off-by:
-
