An irq is only needed by this driver in order to support async commands.
Since it is optional, modify the attach so that if an invalid irq is
selected by the user, or the request_irq() fails, the attach does not
fail.

Remove all the printk noise about the irq.

Only hookup the async command support if the request_irq() was successful.

Tidy up das16m1_irq_bits() a bit. This helper returns the value that needs
to be written to the DAS16M1_INTR_CONTROL register to setup the irq routing.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The ai read timeout will return -ETIMEDOUT. The printk is just added
noise. Remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This driver does not have interrupt support. Remove the commented out
code that requests the irq.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

These commented out messages are just added noise. Remove them.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The code to initialize subdevice[2] is commented out and incomplete.
Just remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove the commented out message, it would just be added noise.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Convert these messages to dev_dbg() and tidy them up a bit.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Convert these warning messages to dev_dbg() to minimize the noise.
Also, tidy them up a bit.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Convert these debug messages to dev_dbg() and tidy them up a bit.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The "success" message after an attach is just added noise. Remove it.

The normal return value for "success" is 0.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Convert these debug messages to dev_dbg().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

An allocation failure will have already displayed a message.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Line 921: Removed the space before the semicolon.
Signed-off-by: Aldo Iljazi <mail@aldo.io>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers: staging: ft1000: ft1000-usb: ft1000_debug.c: check return value of get_user() in ft1000_ioctl()

get_user() may fail and cause 'msgsz' uninitialized, so need give a
check. The related warning (with allmodconfig under hexagon):

    CC [M]  drivers/staging/ft1000/ft1000-usb/ft1000_debug.o
  drivers/staging/ft1000/ft1000-usb/ft1000_debug.c: In function 'ft1000_ioctl':
  include/uapi/linux/swab.h:53:9: warning: 'msgsz' may be used uninitialized in this function [-Wuninitialized]
  drivers/staging/ft1000/ft1000-usb/ft1000_debug.c:533:17: note: 'msgsz' was declared here
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The rest of the code seem to imply that rmf_dumper may indeed be
NULL.  Change the code so that dumping is not even considered if
rmf_dumper callback is not set.
Signed-off-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bus_info field of struct ethtool_drvinfo is an array thus it always
evaluates to true in a boolean context.  Therefore operation
depending on it being false will never be executed.
Signed-off-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixed the following coding style issues:

Lines 66-70: Replaced spaced with tabs.
Lines 75, 98, 182: Inserted space before the open parenthesis.
Line 89: Inserted spaces around that '='
Signed-off-by: Aldo Iljazi <mail@aldo.io>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix to return -ENOMEM instead of 0 when the memory alloc fail
in probe error handling path.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixed a coding style issue, specifically:

Line 1798: Removed parentheses since return is not a function.
Signed-off-by: Aldo Iljazi <mail@aldo.io>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The DWC2 USB controller in the BCM2835 (Raspberry Pi) needs some non-
default parameters. Select these based on the compatible value from the
DT node. For all other HW, fall back to the default parameters currently
in use.

The values in params_bcm2835[] were posted to the mailing list by Paul
quite some time ago. I made a couple of minor modifications since then;
to set ahbcfg instead of ahb_single, and to set uframe_sched.
Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Got below warning when building with sparc:
drivers/staging/lustre/lustre/llite/file.c: In function 'll_file_aio_write':
drivers/staging/lustre/lustre/llite/file.c:1247:9: warning: 'count' may be used uninitialized in this function [-Wuninitialized]
drivers/staging/lustre/lustre/llite/file.c: In function 'll_file_aio_read':
drivers/staging/lustre/lustre/llite/file.c:1188:9: warning: 'count' may be used uninitialized in this function [-Wuninitialized]
Signed-off-by: Peng Tao <bergwolf@gmail.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

register_sysctl_table/unregister_sysctl_table are defined
regardless of CONFIG_SYSCTL true or false. so we don't need
to surround them with #ifdef CONFIG_SYSCTL. Besides, current
code got build warnings when CONFIG_SYSCTL is not set:
drivers/staging/lustre/lustre/libcfs/linux/linux-proc.c:368:20: warning:
‘lnet_table’ defined but not used [-Wunused-variable]
Signed-off-by: Peng Tao <bergwolf@gmail.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

It is not strictly related to procfs. Besides, we already call obd_sysctl_clean
outside of class_procfs_clean.
Signed-off-by: Peng Tao <bergwolf@gmail.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: Peng Tao <bergwolf@gmail.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

No need to surround them with #ifdef LPROCFS.
Signed-off-by: Peng Tao <bergwolf@gmail.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Got below warning when building lustre with 4.7.3.
drivers/staging/lustre/lustre/obdclass/llog_test.c: In function ‘
llog_test_init’:
drivers/staging/lustre/lustre/obdclass/llog_test.c:1058:28: warning: ‘
lvars.module_vars’ is used uninitialized in this function
[-Wuninitialized]
Signed-off-by: Peng Tao <bergwolf@gmail.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This is only part of the original Lustre tree commit. It cleans up
ptlrpcd_start error handling a bit.

Lustre-change: http://review.whamcloud.com/6139
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3204Signed-off-by: Dmitry Eremin <dmitry.eremin@intel.com>
Signed-off-by: Ned Bass <bass6@llnl.gov>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Peng Tao <bergwolf@gmail.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This is only part of the original Lustre tree commit splitted to follow the
"one thing per patch" rule.

Lustre-change: http://review.whamcloud.com/6139
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3204Signed-off-by: Dmitry Eremin <dmitry.eremin@intel.com>
Signed-off-by: Ned Bass <bass6@llnl.gov>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Peng Tao <bergwolf@gmail.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This is part of original Lustre tree commit. It removes never implemented
suspend timeouts functionality from pinger.c which was commented out
since 2007 and going to be replaced by adaptive timeouts. Also removed all
references to this functionality from ldlm_lockd.c, ldlm_request.c and
import.c which actually nevers executes or do nothing.

Lustre-change: http://review.whamcloud.com/6139
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3204Signed-off-by: Dmitry Eremin <dmitry.eremin@intel.com>
Signed-off-by: Ned Bass <bass6@llnl.gov>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Peng Tao <bergwolf@gmail.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This is SET_BUT_UNUSED/UNUSED macro cleaning up part
of the original Lustre tree commit.

Lustre-change: http://review.whamcloud.com/6139
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3204Signed-off-by: Dmitry Eremin <dmitry.eremin@intel.com>
Signed-off-by: Ned Bass <bass6@llnl.gov>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Peng Tao <bergwolf@gmail.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch implements an extended attribute cache for
a Lustre client. It is organized as a write-through
cache: reads are performed from cache, updates are sent
synchronously to the MDS. An additional inode bit
MDS_INODELOCK_XATTR is added to protect the cache.

Lustre-change: http://review.whamcloud.com/5537
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2869Signed-off-by: Andrew Perepechko <andrew_perepechko@xyratex.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
[remove extra GPL notice in original patch as kernel already has one
and it causes checkpatch error. -- Peng Tao]
Signed-off-by: Peng Tao <bergwolf@gmail.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HSM Release is one of the key feature of HSM. To perform HSM
release, clients need to acquire the file lease exclusivelt and
flush dirty cache from clients. A special close REQ will be sent
to the MDT to release the lease and get rid of OST objects.

Lustre-change: http://review.whamcloud.com/7028
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-1333Signed-off-by: Aurelien Degremont <aurelien.degremont@cea.fr>
Signed-off-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Alex Zhuravlev <alexey.zhuravlev@intel.com>
Signed-off-by: Peng Tao <bergwolf@gmail.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

When a system runs out of memory and the function
ptlrpc_register_bulk() is called from ptl_send_rpc() the call to
LNetMEAttach() fails due to failure to allocate memory.  This forces
the code into an error path, which most probably previously went
untested.  The error path:
if (rc != 0) {
        CERROR("%s: LNetMEAttach failed x"LPU64"/%d: rc = %dn",
                desc->bd_export->exp_obd->obd_name, xid,
                posted_md, rc);
        break;
}
This print assumes that desc->bd_export is not NULL.  However, it is.
In fact it is expected to be NULL.  desc->bd_import is the correct
structure to access in this case.

Lustre-change: http://review.whamcloud.com/7121
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3585
Cc: stable <stable@vger.kernel.org> # 3.12
Signed-off-by: Amir Shehata <amir.shehata@intel.com>
Reviewed-by: Liang Zhen <liang.zhen@intel.com>
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Peng Tao <bergwolf@gmail.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

After removing LIBCFS_HAVE_IS_COMPAT_TASK test we have a
compilation issue with kernels configured without CONFIG_COMPAT.

Lustre-change: http://review.whamcloud.com/7118
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2800Signed-off-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-by: James Simmons <uja.ornl@gmail.com>
Reviewed-by: Bob Glossman <bob.glossman@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Peng Tao <bergwolf@gmail.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ll_lookup_it() checks for O_CREAT in struct lookup_intent's
it_create_mode member which is nonsensical, as it_create_mode is used
for file mode bits (S_IFREG, S_IRUSR, ...). Fix this by just checking
for IT_CREATE in it_op. This will not affect the behavior of either
function, since if O_CREATE (0100) is actually set in o_create_mode
then IT_CREATE must have been set in it_op. In ll_atomic_open() check
for O_CREAT in the open_flags parameter rather than testing mode.

Lustre-change: http://review.whamcloud.com/6786
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3517Signed-off-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Lai Siyao <lai.siyao@intel.com>
Reviewed-by: Peng Tao <bergwolf@gmail.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Peng Tao <bergwolf@gmail.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This is the coding style part of the original Lustre commit.

Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3335
Lustre-change: http://review.whamcloud.com/6669Signed-off-by: Fan Yong <fan.yong@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Alex Zhuravlev <alexey.zhuravlev@intel.com>
Signed-off-by: Peng Tao <bergwolf@gmail.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Main part of original patch in Lustre tree
(http://review.whamcloud.com/6669) changes server code and
is unneeded by client. The patch only picks up common
functions and data structures change.

Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3335
Lustre-change: http://review.whamcloud.com/6669Signed-off-by: Fan Yong <fan.yong@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Alex Zhuravlev <alexey.zhuravlev@intel.com>
Signed-off-by: Peng Tao <bergwolf@gmail.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This is only part of the original Lustre tree commit.
Main part of the original commit changes server code and is
unneeded at client side.

Lustre-change: http://review.whamcloud.com/6534
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3342Signed-off-by: JC Lafoucriere <jacques-charles.lafoucriere@cea.fr>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Peng Tao <bergwolf@gmail.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This is only part of the original Lustre tree commit.
Main part of the original commit changes server code and is
unneeded at client side.

Lustre-change: http://review.whamcloud.com/6534
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3342Signed-off-by: JC Lafoucriere <jacques-charles.lafoucriere@cea.fr>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Peng Tao <bergwolf@gmail.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MGC uses lvfs API to access local llogs blocking removal of old code

- llog_is_empty() and llog_backup() are introduced

Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2059
Lustre-change: http://review.whamcloud.com/5049
Cc: Levente Kurusa <levex@linux.com>
Signed-off-by: Mikhail Pershin <mike.pershin@intel.com>
Reviewed-by: Lai Siyao <lai.siyao@intel.com>
Reviewed-by: Alex Zhuravlev <alexey.zhuravlev@intel.com>
Reviewed-by: James Simmons <uja.ornl@gmail.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
[pick client side change only -- Peng Tao]
Signed-off-by: Peng Tao <bergwolf@gmail.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>