Merge tag 'omapdrm-4.14-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux into drm-next

omapdrm fixes for 4.14

* fix compilation when compiling omapfb driver
* WA for OMAP3 endless sync lost issue
* WA for OMAP5 DSI PLL issue
* fix analog TV out modecheck

* tag 'omapdrm-4.14-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux:
  ARM: OMAP2+: fix missing variable declaration
  drm/omap: work-around for omap3 display enable
  drm/omap: fix i886 work-around
  drm/omap: fix analog tv-out modecheck

Updates for 4.14..  I have some further patches from Jordan to add
multiple priority levels and pre-emption, but those will probably be
for 4.15 to give me time for the mesa parts.

* tag 'drm-msm-next-2017-08-22' of git://people.freedesktop.org/~robclark/linux:
  drm/msm/mdp5: mark runtime_pm functions as __maybe_unused
  drm/msm: remove unused variable
  drm/msm/mdp5: make helper function static
  drm/msm: make msm_framebuffer_init() static
  drm/msm: add helper to allocate stolen fb
  drm/msm: don't track fbdev's gem object separately
  drm/msm: add modeset module param
  drm/msm/mdp5: add tracking for clk enable-count
  drm/msm: remove unused define
  drm/msm: Add a helper function for in-kernel buffer allocations
  drm/msm: Attach the GPU MMU when it is created
  drm/msm: Add A5XX hardware fault detection
  drm/msm: Remove uneeded platform dev members
  drm/msm/mdp5: Set up runtime PM for MDSS
  drm/msm/mdp5: Write to SMP registers even if allocations don't change
  drm/msm/mdp5: Don't use mode_set helper funcs for encoders and CRTCs
  drm/msm/dsi: Implement RPM suspend/resume callbacks
  drm/msm/dsi: Set up runtime PM for DSI
  drm/msm/hdmi: Set up runtime PM for HDMI
  drm/msm/mdp5: Use runtime PM get/put API instead of toggling clocks

The function that was added doesn't actually build:

arch/arm/mach-omap2/display.c: In function 'omapdss_init_fbdev':
arch/arm/mach-omap2/display.c:184:2: error: 'r' undeclared (first use in this function)

This adds a declaration for 'r' to fix it.

Fixes: 5ce78302 ("ARM: OMAP2+: Don't register omapdss device for omapdrm")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

Seems that on omap3 enabling a crtc without any planes causes a sync
lost flood. This only happens on the first enable, and after that it
works. This looks like an HW issue and it's unclear why this is
happening or how to fix it.

This started happening after 897145d0
("drm/omapdrm: Move commit_modeset_enables() before commit_planes()")
which, as a work-around, changed omapdrm first to do the modeset enable,
and plane set only after that. This WA should be fine on all DSS
versions, but apparently OMAP3 DSS is an exception.

This patch reverts that work-around for OMAP3 DSS.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

7d267f06 ("drm/omap: work-around for
errata i886") changed how the PLL dividers and multipliers are
calculated. While the new way should work fine for all the PLLs, it
breaks omap5 PLLs. The issues seen are rather odd: seemed that the
output clock rate is half of what we asked. It is unclear what's causing
there issues.

As a work-around this patch adds a "errata_i886" flag, which is set only
for DRA7's PLLs, and the PLL setup is done according to that flag.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: H. Nikolaus Schaller <hns@goldelico.com>

omapdrm rejects all venc (analog tv-out) videomodes, due to somewhat
strict checking of the values, making tv-out unusable.

We only support two videomodes, one for PAL and one for NTSC, so instead
of trying to check every field in the videomode struct, this patch makes
the driver check only the pixel clock and the size of the display.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

Not a lot that's ready to be included this round for Nouveau.  GP108
modesetting support, and misc other fixes.

* 'linux-4.14' of git://github.com/skeggsb/linux:
  drm/nouveau/kms/nv50: perform null check on msto[i] rathern than msto
  drm/nouveau/pci/msi: disable MSI on big-endian platforms by default
  drm/nouveau: silence suspend/resume debugging messages
  drm/nouveau/kms/nv04-nv4x: fix exposed format list
  drm/nouveau/kms/nv10-nv40: add NV21 support to overlay
  drm/nouveau/kms/nv04-nv40: improve overlay error detection, fix pitch setting
  drm/nouveau/kms/nv04-nv40: prevent undisplayable framebuffers from creation
  drm/nouveau/mpeg: print more debug info when rejecting dma objects
  drm/nouveau/fb/gf100-: zero mmu debug buffers
  drm/nouveau/bar/gf100: add config option to limit BAR2 to 16MiB
  initial support (display-only) for GP108
  drm/nouveau/falcon: use a more reasonable msgqueue timeout value
  drm/nouveau/disp: Silence DCB warnings.
  drm/nouveau/bios: Demote missing fp table message to NV_DEBUG.
  drm/nouveau/pmu/gt215-: abstract detection of whether reset is needed
  drm/nouveau/pmu/gt215: fix reset
  drm/nouveau/mc/gf100: add pmu to reset mask
  drm/nouveau/disp/gf119-: avoid creating non-existent heads
  drm/nouveau/therm/gm200: Added
  drm/nouveau/therm: fix spelling mistake on array thresolds

When CONFIG_PM is disabled, we get harmless warnings about unused
functions:

drivers/gpu/drm/msm/mdp/mdp5/mdp5_kms.c:1025:12: error: 'mdp5_runtime_resume' defined but not used [-Werror=unused-function]
 static int mdp5_runtime_resume(struct device *dev)
            ^~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/msm/mdp/mdp5/mdp5_kms.c:1015:12: error: 'mdp5_runtime_suspend' defined but not used [-Werror=unused-function]
 static int mdp5_runtime_suspend(struct device *dev)
            ^~~~~~~~~~~~~~~~~~~~

This marks both functions as __maybe_unused so the compiler
can drop them silently.

Fixes: d68fe15b ("drm/msm/mdp5: Use runtime PM get/put API instead of toggling clocks")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Rob Clark <robdclark@gmail.com>

A cleanup left behind an unused variable that we have to remove
in order to avoid this harmless warning:

drivers/gpu/drm/msm/adreno/a5xx_gpu.c: In function 'a5xx_zap_shader_init':
drivers/gpu/drm/msm/adreno/a5xx_gpu.c:493:19: error: unused variable 'a5xx_gpu' [-Werror=unused-variable]

Fixes: 8d6f0827 ("drm/msm: Remove uneeded platform dev members")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Rob Clark <robdclark@gmail.com>

Not needed outside of mdp5_crtc.c.
Signed-off-by: Rob Clark <robdclark@gmail.com>

Only needed in msm_fb.c so don't export it.
Signed-off-by: Rob Clark <robdclark@gmail.com>

We'll later want to re-use this for state-readback when bootloader
enables display, so that we can create an fb for the initial
plane->state->fb.
Signed-off-by: Rob Clark <robdclark@gmail.com>

The drm_framebuffer is refcnt'd these days and will unref the underlying
bo as needed.  So we can simplify a little.
Signed-off-by: Rob Clark <robdclark@gmail.com>

At least for debugging it is nice to have an easy way to force the
driver not to load.
Signed-off-by: Rob Clark <robdclark@gmail.com>

Accessing registers for an unclocked block is an insta-reboot on
snapdragon devices.  So add a bit of logic to track the enable_count so
we can WARN_ON() unclocked register writes.  This makes it much easier
to track down mistakes.
Signed-off-by: Rob Clark <robdclark@gmail.com>

Signed-off-by: Rob Clark <robdclark@gmail.com>

Nearly all of the buffer allocations for kernel allocate an buffer object,
virtual address and GPU iova at the same time. Make a helper function to
handle the details.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
[dropped msm_fbdev conversion to new helper, since it interferes with
display-handover work, where we want to separate allocation and mapping]
Signed-off-by: Rob Clark <robdclark@gmail.com>

Currently the GPU MMU is attached in the adreno_gpu code but as
more and more of the GPU initialization moves to the generic
GPU path we have a need to map and use GPU memory earlier and
earlier.  There isn't any reason to defer attaching the MMU
until later so attach it right after the address space is
created so it can be used immediately.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

The null check on the array msto is incorrect since msto is never
null. The null check should be instead on msto[i] since this is
being dereferenced in the call to drm_mode_connector_attach_encoder.

Thanks to Emil Velikov for pointing out the mistake in my original
fix and for suggesting the correct fix.

Detected by CoverityScan, CID#1375915 ("Array compared against 0")

Fixes: f479c0ba ("drm/nouveau/kms/nv50: initial support for DP 1.2 multi-stream")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

It appears that MSI does not work on either G5 PPC nor on a E5500-based
platform, where other hardware is reported to work fine with MSI.

Both tests were conducted with NV4x hardware, so perhaps other (or even
this) hardware can be made to work. It's still possible to force-enable
with config=NvMSI=1 on load.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: stable@vger.kernel.org
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

These are particularly annoying on Optimus systems where these paths can
be called regularly.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm_crtc_init exposes the XRGB8888 and ARGB8888 formats. In actuality,
ARGB8888's 32-bit depth messes up some formulas that weren't meant for
it, and the alpha is fairly meaningless for the primary plane.

The modesetting logic appears to be fully prepared for RGB565 as well as
XRGB1555 however, as tested with modetest.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

We were previously setting the pitch based on a perfectly packed buffer.
This does not necessarily happen. Either modetest started generating
such buffers recently, or earlier testing only happened with well-picked
overlay sizes.

While we're at it, beef up and refactor the error state detection.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Pre-nv50 YUV overlays have stringent requirements for working with the
internal machinery. Instead of rejecting these at update_plane time, we
should instead prevent the framebuffers from being created in the first
place.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Tobias Klausmann <tobias.johannes.klausmann@mni.thm.de>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

These are used for accesses to sparse mappings, and we want reads of
such mappings to return 0.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Useful for testing, and for the userspace build where we can't kick
a framebuffer driver off the device.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Forked from GP107 implementation. Secboot/gr left out as we don't have
signed blobs from NVIDIA in linux-firmware.

(Ben): Was unable to mmiotrace the binary driver for unknown reasons,
       so not able to 100% confirm that no other changes from GP107
       are needed.  Quick testing shows it seems to work well enough
       for display.  Due to NVIDIA dragging their heels on getting
       signed firmware to us, this is the best we can do for now.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101601Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Most of these errors seem to be WFD related. Official documentation
says dcb type 8 is reserved. It's probably used for WFD. Silence
the warning in either case.

Connector type 70 is stated to be a virtual connector for WiFi
display. Since we know this, don't warn that we don't.

Signed-off by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

This warning seems to pop up mainly in laptop cards. Silence it as
it is expected behavior.

Signed-off by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

GT215, GF100-GP100, and GP10x are all different.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

The NV_PMC_ENABLE bit for PMU did not appear until GF100, and some other
unknown register needs to be poked instead.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

An upcoming commit will replace direct NV_PMC register bashing from PMU
with a call to the proper function.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

We assume that each board has 4 heads for GF119+. However this is not
necessarily true - in the case of a GP108 board, the register indicated
that there were only 2.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101601Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

This allows temperature readouts on maxwell2 GPUs.
Signed-off-by: Karol Herbst <karolherbst@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Array thresolds should be named thresholds, rename it. Also make it static
static const char * const
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

imx-drm: lock scanout transfers for consecutive bursts

- Lock the IDMAC scanout channel for multiple back-to-back bursts if possible,
  to improve memory bandwidth utilisation.
- Replace a few occurences of state->fb with the already existing local fb
  variable in ipu_plane_atomic_update

* tag 'imx-drm-next-2017-07-18' of git://git.pengutronix.de/git/pza/linux:
  drm/imx: lock scanout transfers for consecutive bursts
  drm/imx: ipuv3-plane: use fb local variable instead of state->fb

Final pile of features for 4.14

- New ioctl to change NOA configurations, plus prep (Lionel)
- CCS (color compression) scanout support, based on the fancy new
  modifier additions (Ville&Ben)
- Document i915 register macro style (Jani)
- Many more gen10/cnl patches (Rodrigo, Pualo, ...)
- More gpu reset vs. modeset duct-tape to restore the old way.
- prep work for cnl: hpd_pin reorg (Rodrigo), support for more power
  wells (Imre), i2c pin reorg (Anusha)
- drm_syncobj support (Jason Ekstrand)
- forcewake vs gpu reset fix (Chris)
- execbuf speedup for the no-relocs fastpath, anv/vk low-overhead ftw (Chris)
- switch to idr/radixtree instead of the resizing ht for execbuf id->vma
  lookups (Chris)

gvt:
- MMIO save/restore optimization (Changbin)
- Split workload scan vs. dispatch for more parallel exec (Ping)
- vGPU full 48bit ppgtt support (Joonas, Tina)
- vGPU hw id expose for perf (Zhenyu)

Bunch of work all over to make the igt CI runs more complete/stable.
Watch https://intel-gfx-ci.01.org/tree/drm-tip/shards-all.html for
progress in getting this ready. Next week we're going into production
mode (i.e. will send results to intel-gfx) on hsw, more platforms to
come.

Also, a new maintainer tram, I'm stepping out. Huge thanks to Jani for
being an awesome co-maintainer the past few years, and all the best
for Jani, Joonas&Rodrigo as the new maintainers!

* tag 'drm-intel-next-2017-08-18' of git://anongit.freedesktop.org/git/drm-intel: (179 commits)
  drm/i915: Update DRIVER_DATE to 20170818
  drm/i915/bxt: use NULL for GPIO connection ID
  drm/i915: Mark the GT as busy before idling the previous request
  drm/i915: Trivial grammar fix s/opt of/opt out of/ in comment
  drm/i915: Replace execbuf vma ht with an idr
  drm/i915: Simplify eb_lookup_vmas()
  drm/i915: Convert execbuf to use struct-of-array packing for critical fields
  drm/i915: Check context status before looking up our obj/vma
  drm/i915: Don't use MI_STORE_DWORD_IMM on Sandybridge/vcs
  drm/i915: Stop touching forcewake following a gen6+ engine reset
  MAINTAINERS: drm/i915 has a new maintainer team
  drm/i915: Split pin mapping into per platform functions
  drm/i915/opregion: let user specify override VBT via firmware load
  drm/i915/cnl: Reuse skl_wm_get_hw_state on Cannonlake.
  drm/i915/gen10: implement gen 10 watermarks calculations
  drm/i915/cnl: Fix LSPCON support.
  drm/i915/vbt: ignore extraneous child devices for a port
  drm/i915/cnl: Setup PAT Index.
  drm/i915/edp: Allow alternate fixed mode for eDP if available.
  drm/i915: Add support for drm syncobjs
  ...