- 12 Sep, 2014 40 commits
-
-
Michal Nazarewicz authored
It appears that no one ever run ffs-test on a big-endian machine, since it used cpu-endianess for fs_count and hs_count fields which should be in little-endian format. Fix by wrapping the numbers in cpu_to_le32. Cc: stable@vger.kernel.org Signed-off-by:
Michal Nazarewicz <mina86@mina86.com> Signed-off-by:
Felipe Balbi <balbi@ti.com> (cherry picked from commit f35f7124) Signed-off-by:
Sasha Levin <sasha.levin@oracle.com>
-
J. Bruce Fields authored
An NFS operation that creates a new symlink includes the symlink data, which is xdr-encoded as a length followed by the data plus 0 to 3 bytes of zero-padding as required to reach a 4-byte boundary. The vfs, on the other hand, wants null-terminated data. The simple way to handle this would be by copying the data into a newly allocated buffer with space for the final null. The current nfsd_symlink code tries to be more clever by skipping that step in the (likely) case where the byte following the string is already 0. But that assumes that the byte following the string is ours to look at. In fact, it might be the first byte of a page that we can't read, or of some object that another task might modify. Worse, the NFSv4 code tries to fix the problem by actually writing to that byte. In the NFSv2/v3 cases this actually appears to be safe: - nfs3svc_decode_symlinkargs explicitly null-terminates the data (after first checking its length and copying it to a new page). - NFSv2 limits symlinks to 1k. The buffer holding the rpc request is always at least a page, and the link data (and previous fields) have maximum lengths that prevent the request from reaching the end of a page. In the NFSv4 case the CREATE op is potentially just one part of a long compound so can end up on the end of a page if you're unlucky. The minimal fix here is to copy and null-terminate in the NFSv4 case. The nfsd_symlink() interface here seems too fragile, though. It should really either do the copy itself every time or just require a null-terminated string. Reported-by:
Jeff Layton <jlayton@primarydata.com> Cc: stable@vger.kernel.org Signed-off-by:
J. Bruce Fields <bfields@redhat.com> nfsd: fix rare symlink decoding bug An NFS operation that creates a new symlink includes the symlink data, which is xdr-encoded as a length followed by the data plus 0 to 3 bytes of zero-padding as required to reach a 4-byte boundary. The vfs, on the other hand, wants null-terminated data. The simple way to handle this would be by copying the data into a newly allocated buffer with space for the final null. The current nfsd_symlink code tries to be more clever by skipping that step in the (likely) case where the byte following the string is already 0. But that assumes that the byte following the string is ours to look at. In fact, it might be the first byte of a page that we can't read, or of some object that another task might modify. Worse, the NFSv4 code tries to fix the problem by actually writing to that byte. In the NFSv2/v3 cases this actually appears to be safe: - nfs3svc_decode_symlinkargs explicitly null-terminates the data (after first checking its length and copying it to a new page). - NFSv2 limits symlinks to 1k. The buffer holding the rpc request is always at least a page, and the link data (and previous fields) have maximum lengths that prevent the request from reaching the end of a page. In the NFSv4 case the CREATE op is potentially just one part of a long compound so can end up on the end of a page if you're unlucky. The minimal fix here is to copy and null-terminate in the NFSv4 case. The nfsd_symlink() interface here seems too fragile, though. It should really either do the copy itself every time or just require a null-terminated string. Reported-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Kinglong Mee <kinglongmee@gmail.com> Signed-off-by:
-
Paolo Bonzini authored
KVM does not really do much with the PAT, so this went unnoticed for a long time. It is exposed however if you try to do rdmsr on the PAT register. Reported-by:
Valentine Sinitsyn <valentine.sinitsyn@gmail.com> Cc: stable@vger.kernel.org Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> (cherry picked from commit 7cb060a9) Signed-off-by:
-
Nadav Amit authored
commit 682367c4 upstream. Recent Intel CPUs have 10 variable range MTRRs. Since operating systems sometime make assumptions on CPUs while they ignore capability MSRs, it is better for KVM to be consistent with recent CPUs. Reporting more MTRRs than actually supported has no functional implications. Signed-off-by:
Nadav Amit <namit@cs.technion.ac.il> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> (cherry picked from commit 80bbfbaa)
-
David R. Piegdon authored
Fix a parser-bug in the omap2 muxing code where muxtable-entries will be wrongly selected if the requested muxname is a *prefix* of their m0-entry and they have a matching mN-entry. Fix by additionally checking that the length of the m0_entry is equal. For example muxing of "dss_data2.dss_data2" on omap32xx will fail because the prefix "dss_data2" will match the mux-entries "dss_data2" as well as "dss_data20", with the suffix "dss_data2" matching m0 (for dss_data2) and m4 (for dss_data20). Thus both are recognized as signal path candidates: Relevant muxentries from mux34xx.c: _OMAP3_MUXENTRY(DSS_DATA20, 90, "dss_data20", NULL, "mcspi3_somi", "dss_data2", "gpio_90", NULL, NULL, "safe_mode"), _OMAP3_MUXENTRY(DSS_DATA2, 72, "dss_data2", NULL, NULL, NULL, "gpio_72", NULL, NULL, "safe_mode"), This will result in a failure to mux the pin at all: _omap_mux_get_by_name: Multiple signal paths (2) for dss_data2.dss_data2 Patch should apply to linus' latest master down to rather old linux-2.6 trees. Signed-off-by:David R. Piegdon <lkml@p23q.org> Cc: stable@vger.kernel.org [tony@atomide.com: updated description to include full description] Signed-off-by:
Tony Lindgren <tony@atomide.com> (cherry picked from commit c021f241) Signed-off-by:
-
Thomas Hellstrom authored
Commit "drm/vmwgfx: correct fb_fix_screeninfo.line_length", while fixing a vmwgfx fbdev bug, also writes the pitch to a supposedly read-only register: SVGA_REG_BYTES_PER_LINE, while it should be (and also in fact is) written to SVGA_REG_PITCHLOCK. This patch is Cc'd stable because of the unknown effects writing to this register might have, particularly on older device versions. v2: Updated log message. Cc: stable@vger.kernel.org Cc: Christopher Friedt <chrisfriedt@gmail.com> Tested-by:
Christopher Friedt <chrisfriedt@gmail.com> Signed-off-by:
Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by:
Jakob Bornecrantz <jakob@vmware.com> (cherry picked from commit 4e578080) Signed-off-by:
-
Thomas Petazzoni authored
The pxa3xx_nand driver currently uses __raw_writel() and __raw_readl() to access I/O registers. However, those functions do not do any endianness swapping, which means that they won't work when the CPU runs in big-endian but the I/O registers are little endian, which is the common situation for ARM systems running big endian. Since __raw_writel() and __raw_readl() do not include any memory barriers and the pxa3xx_nand driver can only be compiled for ARM platforms, the closest I/o accessors functions that do endianess swapping are writel_relaxed() and readl_relaxed(). This patch has been verified to work on Armada XP GP: without the patch, the NAND is not detected when the kernel runs big endian while it is properly detected when the kernel runs little endian. With the patch applied, the NAND is properly detected in both situations (little and big endian). Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: <stable@vger.kernel.org> # v3.13+ Signed-off-by:
Brian Norris <computersforpeace@gmail.com> (cherry picked from commit b7e46062) Signed-off-by:
-
Michal Nazarewicz authored
If the descriptors do not need any strings and user space sends empty set of strings, the ffs->stringtabs field remains NULL. Thus *ffs->stringtabs in functionfs_bind leads to a NULL pointer dereferenece. The bug was introduced by commit [fd7c9a00: “use usb_string_ids_n()”]. While at it, remove double initialisation of lang local variable in that function. ffs->strings_count does not need to be checked in any way since in the above scenario it will remain zero and usb_string_ids_n() is a no-operation when colled with 0 argument. Cc: <stable@vger.kernel.org> # v2.6.36+ Signed-off-by:
-
Johan Hovold authored
Fix NULL-pointer dereference when probing an interface with no endpoints. These devices have two bulk endpoints per interface, but this avoids crashing the kernel if a user forces a non-FTDI device to be probed. Note that the iterator variable was made unsigned in order to avoid a maybe-uninitialized compiler warning for ep_desc after the loop. Fixes: 895f28ba ("USB: ftdi_sio: fix hi-speed device packet size calculation") Reported-by:
Mike Remski <mremski@mutualink.net> Tested-by:
Johan Hovold <johan@kernel.org> (cherry picked from commit aea1ae87) Signed-off-by:
-
Bjørn Mork authored
Adding a couple of Olivetti modems and blacklisting the net function on a couple which are already supported. Reported-by:
Lars Melin <larsm17@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
Oliver Neukum authored
Reported by Alif Mubarak Ahmad: This device vendor and product id is 1c9e:9800 It is working as serial interface with generic usbserial driver. I thought it is more suitable to use usbserial option driver, which has better capability distinguishing between modem serial interface and micro sd storage interface. [ johan: style changes ] Signed-off-by:
Oliver Neukum <oneukum@suse.de> Tested-by:
Alif Mubarak Ahmad <alive4ever@live.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Wang, Yu authored
The system suspend flow as following: 1, Freeze all user processes and kenrel threads. 2, Try to suspend all devices. 2.1, If pci device is in RPM suspended state, then pci driver will try to resume it to RPM active state in the prepare stage. 2.2, xhci_resume function calls usb_hcd_resume_root_hub to queue two workqueue items to resume usb2&usb3 roothub devices. 2.3, Call suspend callbacks of devices. 2.3.1, All suspend callbacks of all hcd's children, including roothub devices are called. 2.3.2, Finally, hcd_pci_suspend callback is called. Due to workqueue threads were already frozen in step 1, the workqueue items can't be scheduled, and the roothub devices can't be resumed in this flow. The HCD_FLAG_WAKEUP_PENDING flag which is set in usb_hcd_resume_root_hub won't be cleared. Finally, hcd_pci_suspend will return -EBUSY, and system suspend fails. The reason why this issue doesn't show up very often is due to that choose_wakeup will be called in step 2.3.1. In step 2.3.1, if udev->do_remote_wakeup is not equal to device_may_wakeup(&udev->dev), then udev will resume to RPM active for changing the wakeup settings. This has been a lucky hit which hides this issue. For some special xHCI controllers which have no USB2 port, then roothub will not match hub driver due to probe failed. Then its do_remote_wakeup will be set to zero, and we won't be as lucky. xhci driver doesn't need to resume roothub devices everytime like in the above case. It's only needed when there are pending event TRBs. This patch should be back-ported to kernels as old as 3.2, that contains the commit f69e3120 "USB: XHCI: resume root hubs when the controller resumes" Cc: stable@vger.kernel.org # 3.2 Signed-off-by:
Wang, Yu <yu.y.wang@intel.com> Acked-by:
Alan Stern <stern@rowland.harvard.edu> [use readl() instead of removed xhci_readl(), reword commit message -Mathias] Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
-
Mathias Nyman authored
The transfer burst count (TBC) field in xhci 1.0 hosts should be set to the number of bursts needed to transfer all packets in a isoc TD. Supported values are 0-2 (1 to 3 bursts per service interval). Formula for TBC calculation is given in xhci spec section 4.11.2.3: TBC = roundup( Transfer Descriptor Packet Count / Max Burst Size +1 ) - 1 This patch should be applied to stable kernels since 3.0 that contain the commit 5cd43e33 "xhci 1.0: Set transfer burst count field." Cc: stable@vger.kernel.org # 3.0 Suggested-by:
ShiChun Ma <masc2008@qq.com> Signed-off-by:
-
Brian King authored
If a CRQ reset is triggered for some reason while in the middle of performing VSCSI adapter initialization, we don't want to call the done function for the initialization MAD commands as this will only result in two threads attempting initialization at the same time, resulting in failures. Signed-off-by:
Brian King <brking@linux.vnet.ibm.com> Acked-by:
Nathan Fontenot <nfont@linux.vnet.ibm.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Tejun Heo authored
The 'sysret' fastpath does not correctly restore even all regular registers, much less any segment registers or reflags values. That is very much part of why it's faster than 'iret'. Normally that isn't a problem, because the normal ptrace() interface catches the process using the signal handler infrastructure, which always returns with an iret. However, some paths can get caught using ptrace_event() instead of the signal path, and for those we need to make sure that we aren't going to return to user space using 'sysret'. Otherwise the modifications that may have been done to the register set by the tracer wouldn't necessarily take effect. Fix it by forcing IRET path by setting TIF_NOTIFY_RESUME from arch_ptrace_stop_needed() which is invoked from ptrace_stop(). Signed-off-by:
Tejun Heo <tj@kernel.org> Reported-by:
Andy Lutomirski <luto@amacapital.net> Acked-by:
Oleg Nesterov <oleg@redhat.com> Suggested-by:
Linus Torvalds <torvalds@linux-foundation.org> Cc: stable@vger.kernel.org Signed-off-by:
-
Paul Bolle authored
Commit cd64d169 ("powerpc: mtmsrd not defined") added a check for CONFIG_PPC_CPU were a check for CONFIG_PPC_FPU was clearly intended. Fixes: cd64d169 ("powerpc: mtmsrd not defined") Signed-off-by:
Paul Bolle <pebolle@tiscali.nl> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> (cherry picked from commit b69a1da9) Signed-off-by:
-
Paul Bolle authored
Commit b0d278b7 ("powerpc/perf_event: Reduce latency of calling perf_event_do_pending") added a check for CONFIG_PMAC were a check for CONFIG_PPC_PMAC was clearly intended. Fixes: b0d278b7 ("powerpc/perf_event: Reduce latency of calling perf_event_do_pending") Signed-off-by:
-
Bjorn Helgaas authored
3448a19d "vgaarb: use bridges to control VGA routing where possible" added the "flags & PCI_VGA_STATE_CHANGE_DECODES" condition to an existing WARN_ON(), but used bitwise AND (&) instead of logical AND (&&), so the condition is never true. Replace with logical AND. Found by Coverity (CID 142811). Fixes: 3448a19d "vgaarb: use bridges to control VGA routing where possible" Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Acked-by:
Yinghai Lu <yinghai@kernel.org> Acked-by:
David Airlie <airlied@redhat.com> (cherry picked from commit 67ebd814) Signed-off-by:
-
Andy Lutomirski authored
The bad syscall nr paths are their own incomprehensible route through the entry control flow. Rearrange them to work just like syscalls that return -ENOSYS. This fixes an OOPS in the audit code when fast-path auditing is enabled and sysenter gets a bad syscall nr (CVE-2014-4508). This has probably been broken since Linux 2.6.27: af0575bb i386 syscall audit fast-path Cc: stable@vger.kernel.org Cc: Roland McGrath <roland@redhat.com> Reported-by:
Toralf Förster <toralf.foerster@gmx.de> Signed-off-by:
H. Peter Anvin <hpa@linux.intel.com> (cherry picked from commit 554086d8) Signed-off-by:
-
Roger Quadros authored
Without a timetout some tests e.g. test_halt() can remain stuck forever. Signed-off-by:
Roger Quadros <rogerq@ti.com> Reviewed-by:
-
Eric Sandeen authored
If this condition in end_extent_writepage() is false: if (tree->ops && tree->ops->writepage_end_io_hook) we will then test an uninitialized "ret" at: ret = ret < 0 ? ret : -EIO; The test for ret is for the case where ->writepage_end_io_hook failed, and we'd choose that ret as the error; but if there is no ->writepage_end_io_hook, nothing sets ret. Initializing ret to 0 should be sufficient; if writepage_end_io_hook wasn't set, (!uptodate) means non-zero err was passed in, so we choose -EIO in that case. Signed-of-by:
Eric Sandeen <sandeen@redhat.com> Signed-off-by:
Chris Mason <clm@fb.com> (cherry picked from commit 3e2426bd) Signed-off-by:
-
Liu Bo authored
We want to make sure the point is still within the extent item, not to verify the memory it's pointing to. Signed-off-by:
Liu Bo <bo.li.liu@oracle.com> Signed-off-by:
-
Rickard Strandqvist authored
There is otherwise a risk of a possible null pointer dereference. Was largely found by using a static code analysis program called cppcheck. Signed-off-by:
Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Signed-off-by:
-
Nicholas A. Bellinger authored
[Note that a different patch to address the same issue went in during v3.15-rc1 (commit 4442dc8a), but includes a bunch of other changes that don't strictly apply to fixing the bug] This patch changes rd_allocate_sgl_table() to explicitly clear ramdisk_mcp backend memory pages by passing __GFP_ZERO into alloc_pages(). This addresses a potential security issue where reading from a ramdisk_mcp could return sensitive information, and follows what >= v3.15 does to explicitly clear ramdisk_mcp memory at backend device initialization time. Reported-by:
Jorge Daniel Sequeira Matias <jdsm@tecnico.ulisboa.pt> Cc: Jorge Daniel Sequeira Matias <jdsm@tecnico.ulisboa.pt> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
-
Johan Hovold authored
Make sure that needs_remote_wake up is always set when there are open ports. Currently close() would unconditionally set needs_remote_wakeup to 0 even though there might still be open ports. This could lead to blocked input and possibly dropped data on devices that do not support remote wakeup (and which must therefore not be runtime suspended while open). Add an open_ports counter (protected by the susp_lock) and only clear needs_remote_wakeup when the last port is closed. Fixes: e6929a90 ("USB: support for autosuspend in sierra while online") Cc: <stable@vger.kernel.org> # v2.6.32 Signed-off-by:
Johan Hovold <jhovold@gmail.com> Signed-off-by:
-
Johan Hovold authored
The delayed-write queue was never emptied on disconnect, something which would lead to leaked urbs and transfer buffers if the device is disconnected before being runtime resumed due to a write. Fixes: e6929a90 ("USB: support for autosuspend in sierra while online") Cc: <stable@vger.kernel.org> # v2.6.32 Signed-off-by:
-
Johan Hovold authored
Neither the transfer buffer or the urb itself were released in the resume error path for delayed writes. Also on errors, the remainder of the queue was not even processed, which leads to further urb and buffer leaks. The same error path also failed to balance the outstanding-urb counter, something which results in degraded throughput or completely blocked writes. Fix this by releasing urb and buffer and balancing counters on errors, and by always processing the whole queue even when submission of one urb fails. Fixes: e6929a90 ("USB: support for autosuspend in sierra while online") Cc: <stable@vger.kernel.org> # v2.6.32 Signed-off-by:
-
Johan Hovold authored
Fix AA deadlock in open error path that would call close() and try to grab the already held disc_mutex. Fixes: b9a44bc1 ("sierra: driver urb handling improvements") Cc: <stable@vger.kernel.org> # v2.6.31 Signed-off-by:
-
Johan Hovold authored
The delayed-write queue was never emptied at shutdown (close), something which could lead to leaked urbs if the port is closed before being runtime resumed due to a write. When this happens the output buffer would not drain on close (closing_wait timeout), and after consecutive opens, writes could be corrupted with previously buffered data, transfered with reduced throughput or completely blocked. Note that unbusy_queued_urb() was simply moved out of CONFIG_PM. Fixes: 383cedc3 ("USB: serial: full autosuspend support for the option driver") Cc: <stable@vger.kernel.org> # v2.6.32 Signed-off-by:
-
xiao jin authored
When enable usb serial for modem data, sometimes the tty is blocked in tty_wait_until_sent because portdata->out_busy always is set and have no chance to be cleared. We find a bug in write error path. usb_wwan_write set portdata->out_busy firstly, then try autopm async with error. No out urb submit and no usb_wwan_outdat_callback to this write, portdata->out_busy can't be cleared. This patch clear portdata->out_busy if usb_wwan_write try autopm async with error. Fixes: 383cedc3 ("USB: serial: full autosuspend support for the option driver") Signed-off-by:
xiao jin <jin.xiao@intel.com> Signed-off-by:
Zhang, Qi1 <qi1.zhang@intel.com> Reviewed-by:
David Cohen <david.a.cohen@linux.intel.com> Cc: <stable@vger.kernel.org> # v2.6.32 Signed-off-by:
-
Mikulas Patocka authored
I had occasional screen corruption with the matrox framebuffer driver and I found out that the reason for the corruption is that the hardware blitter accesses the videoram while it is being written to. The matrox driver has a macro WaitTillIdle() that should wait until the blitter is idle, but it sometimes doesn't work. I added a dummy read mga_inl(M_STATUS) to WaitTillIdle() to fix the problem. The dummy read will flush the write buffer in the PCI chipset, and the next read of M_STATUS will return the hardware status. Since applying this patch, I had no screen corruption at all. Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> (cherry picked from commit 972754cf) Signed-off-by:
-
Paul Bolle authored
Commit 193ab2a6 ("usb: gadget: allow multiple gadgets to be built") basically renamed the Kconfig symbol USB_GADGET_PXA25X to USB_PXA25X. It did not rename the related macros in use at that time. Commit c0a39151 ("ARM: pxa: fix inconsistent CONFIG_USB_PXA27X") did so for all but one macro. Rename that last macro too now. Fixes: 193ab2a6 ("usb: gadget: allow multiple gadgets to be built") Signed-off-by:
-
Alan Stern authored
In usbtest, tests 5 - 8 use the scatter-gather library in usbcore without any sort of timeout. If there's a problem in the gadget or host controller being tested, the test can hang. This patch adds a 10-second timeout to the tests, so that they will fail gracefully with an ETIMEDOUT error instead of hanging. Signed-off-by:
Huang Rui <ray.huang@amd.com> Tested-by:
-
Dan Carpenter authored
This is a static checker fix. The "dev" variable is always NULL after the while statement so we would be dereferencing a NULL pointer here. Fixes: 819a3eba ('[PATCH] applicom: fix error handling') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Paul Bolle authored
Commit d0f47ff1 ("ASoC: OMAP: Build config cleanup for McBSP") removed the Kconfig symbol OMAP_MCBSP. It left two checks for CONFIG_OMAP_MCBSP untouched. Convert these to checks for CONFIG_SND_OMAP_SOC_MCBSP. That must be correct, since that re-enables calls to functions that are all found in sound/soc/omap/mcbsp.c. And that file is built only if CONFIG_SND_OMAP_SOC_MCBSP is defined. Fixes: d0f47ff1 ("ASoC: OMAP: Build config cleanup for McBSP") Signed-off-by:
-
Johan Hovold authored
Make sure only to decrement the PM counters if they were actually incremented. Note that the USB PM counter, but not necessarily the driver core PM counter, is reset when the interface is unbound. Fixes: 11ea859d ("USB: additional power savings for cdc-acm devices that support remote wakeup") Signed-off-by:
-
Johan Hovold authored
Make sure to kill any already submitted read urbs on read-urb submission failures in open in order to prevent doing I/O for a closed port. Fixes: 088c64f8 ("USB: cdc-acm: re-write read processing") Signed-off-by:
-
Johan Hovold authored
We should stop I/O unconditionally at suspend rather than rely on the tty-port initialised flag (which is set prior to stopping I/O during shutdown) in order to prevent suspend returning with URBs still active. Fixes: 11ea859d ("USB: additional power savings for cdc-acm devices that support remote wakeup") Cc: <stable@vger.kernel.org> # v2.6.27 Signed-off-by:
-
Johan Hovold authored
Fix runtime PM handling of control messages by adding the required PM counter operations. Fixes: 11ea859d ("USB: additional power savings for cdc-acm devices that support remote wakeup") Cc: <stable@vger.kernel.org> # v2.6.27 Signed-off-by:
-
Johan Hovold authored
The current ACM runtime-suspend implementation is broken in several ways: Firstly, it buffers only the first write request being made while suspended -- any further writes are silently dropped. Secondly, writes being dropped also leak write urbs, which are never reclaimed (until the device is unbound). Thirdly, even the single buffered write is not cleared at shutdown (which may happen before the device is resumed), something which can lead to another urb leak as well as a PM usage-counter leak. Fix this by implementing a delayed-write queue using urb anchors and making sure to discard the queue properly at shutdown. Fixes: 11ea859d ("USB: additional power savings for cdc-acm devices that support remote wakeup") Reported-by:
-
