- 20 Nov, 2015 6 commits
-
-
LABBE Corentin authored
All atmel_nand_caps are never modified, consitify them. Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com> Acked-by: Josh Wu <josh.wu@atmel.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
-
Brian Norris authored
Most parsers can be handled with our new boilerplate-reducing macro. There are a few that can't be (cmdlineparts and ofpart). Also kill off the owner assignments, since register_mtd_parser() now takes care of that. Signed-off-by: Brian Norris <computersforpeace@gmail.com>
-
Brian Norris authored
This can help eliminate some boilerplate by generating the module_init() and module_exit() functions, and by automatically assigning the module owner. Signed-off-by: Brian Norris <computersforpeace@gmail.com>
-
Brian Norris authored
Pull the supported chip names from drivers/mtd/devices/m25p80.c and stop pointing readers to Linux code. Also (although I see this habit repeated throughout the Documentation/devicetree/bindings/ tree), stop using the title "driver" in this file, when we're trying explicitly to describe hardware, not software. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Cc: <devicetree@vger.kernel.org> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
-
Brian Norris authored
I overlooked a few comments in commit 8947e396 ("Documentation: dt: mtd: replace "nor-jedec" binding with "jedec, spi-nor""). Fix these up now. Suggested-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
-
Brian Norris authored
Commit 43163022 ("mtd: m25p80: allow arbitrary OF matching for "jedec,spi-nor"") moved the "jedec,spi-nor" handling from the spi_device_id table to the of_match_table, to better handle matching complex device tree compatible strings. With that patch, device tree support works as expected when m25p80.c is built into the kernel. However, that commit ignored the fact that: (1) (non-DT) platform devices might want to use the "spi-nor" string for matching with this driver, rather than picking an arbitrary one like "m25p80" (2) the core SPI uevent/modalias code doesn't yet support kernel module autoloading via of_match_table strings; so for DT-based devices, it will only report (part of) the first compatible string used Problem (1) has been reported previously, and I forgot to patch it up afterward. Problem (2) was noticed recently here: http://lists.infradead.org/pipermail/linux-mtd/2015-October/062369.html https://lkml.org/lkml/2015/11/12/574 Specifically, this patch fixes m25p80.ko module autoloading for cases like this: flash@xxx { compatible = "jedec,spi-nor"; ... }; because modalias of "spi:spi-nor" (the only module loading info provided by the SPI core for this device) will now be listed as an alias in m25p80.ko. Notably, it does *not* help cases like this: flash@xxx { compatible = "vendor,shiny-new-device", "jedec,spi-nor"; ... }; unless we also list "shiny-new-device" in m25p_ids[]. There has been discussion on future work for this issue here: https://lkml.org/lkml/2015/11/12/574 Cc: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
-
- 19 Nov, 2015 7 commits
-
-
Andreas Fenkart authored
according datasheet both chips can erase 4kByte sectors individually Signed-off-by: Andreas Fenkart <andreas.fenkart@dev.digitalstrom.org> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
-
Brian Norris authored
Just use the spi-nor default instead. Signed-off-by: Brian Norris <computersforpeace@gmail.com>
-
Brian Norris authored
Some spi-nor drivers perform sector erase by duplicating their write_reg() command. Let's not require that the driver fill this out, and provide a default instead. Tested on m25p80.c and Medatek's MT8173 SPI NOR flash driver. Signed-off-by: Brian Norris <computersforpeace@gmail.com>
-
Boris BREZILLON authored
mtd_to_nand() has been introduced to hide accesses to mtd->priv. All NAND controller drivers should use it instead of directly accessing the ->priv field. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
-
Brian Norris authored
In case other subsystems want to merge in this helper for use in their drivers, let's bring in that development separately from the rest of MTD -next development. Signed-off-by: Brian Norris <computersforpeace@gmail.com>
-
Boris BREZILLON authored
Some drivers are retrieving the nand_chip pointer using the container_of macro on a struct wrapping both the nand_chip and the mtd_info struct while the standard way of retrieving this pointer is through mtd->priv. Provide an helper to do that. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
-
Boris BREZILLON authored
The ->priv field of the mtd_info object attached to a nand_chip device should point to the nand_chip device. The pxa and cafe drivers are assigning this field their own private structure, which works fine as long as the nand_chip field is the first one in the driver private struct but seems a bit fragile. Fix that by setting mtd->priv to point the nand_chip field and assigning chip->priv to the private structure head. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
-
- 18 Nov, 2015 4 commits
-
-
Brian Norris authored
AFAIR this driver was never tested with subpage read support, and this code is currently unused because we don't set the NAND_SUBPAGE_READ flag. It can be resurrected if someone tests it properly. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Tested-by: Ray Jui <rjui@broadcom.com>
-
Brian Norris authored
The read_byte() handling for accessing the flash cache has some awkward swapping being done in the read_byte() function. Let's just make this a byte array, and do the swapping with the word-level macros during the initial buffer copy. This is just a refactoring patch, with no (intended) functional change. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Cc: Clay McClure <clay@daemons.net> Cc: Ray Jui <rjui@broadcom.com> Cc: Scott Branden <sbranden@broadcom.com> Cc: <bcm-kernel-feedback-list@broadcom.com> Tested-by: Clay McClure <clay@daemons.net>
-
Brian Norris authored
It is theoretically possible to probe this driver without a matching device tree, so let's guard against this. Also, use the of_device_get_match_data() helper to make this a bit simpler. Coverity complained about this one. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Han xu <han.xu@freescale.com>
-
Wang YanQing authored
This patch correct some representation errors, add a little clarification in some places, and fix indentation problems for pseudo code. It also delete one more white space for one place. Signed-off-by: Wang YanQing <udknight@gmail.com> [Brian: a few tweaks] Signed-off-by: Brian Norris <computersforpeace@gmail.com>
-
- 17 Nov, 2015 1 commit
-
-
Fabio Estevam authored
Doing a bit-or operation with zero is pointless. Remove this unneeded bit-or. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
-
- 16 Nov, 2015 13 commits
-
-
Brian Norris authored
As Cyrille noted [1], this line is wrong. [1] http://lists.infradead.org/pipermail/linux-mtd/2015-September/061725.htmlSigned-off-by: Brian Norris <computersforpeace@gmail.com> Cc: Cyrille Pitchen <cyrille.pitchen@atmel.com>
-
Nicolas Pitre authored
do_div() is meant to be used with an unsigned dividend. Signed-off-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
-
Ezequiel García authored
The NAND clock can be disabled on suspend and enabled on resume. Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
-
Ezequiel García authored
This macro is not used anymore, so it's just dead code. Remove it. Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
-
Ezequiel García authored
Currently, the driver is trying to detect the presence of a chip by issuing a RESET command before nand_scan_ident. This seems completely redundant, and is also a layering violation as nand_scan_ident is in charge of device detection. This commit removes the RESET command use, and moves the initial timing configuration to pxa3xx_nand_config_ident. Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
-
Ezequiel García authored
This commit simplifies the initial configuration performed by pxa3xx_nand_scan. No functionality change is intended. Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
-
Ezequiel García authored
The Data Flash Control Register (NDCR) contains two types of parameters: those that are needed for device identification, and those that can only be set after device identification. Therefore, the driver can't set them all at once and instead needs to configure the first group before nand_scan_ident() and the second group later. Let's split pxa3xx_nand_config in two halves, and set the parameters that depend on the device geometry once this is known. Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
-
Ezequiel García authored
The chunk size represents the size of the data chunks, which is used by the controllers that allow to split transfered data. However, the initial chunk size is used in a non-splitted way, during device identification. Therefore, it must be large enough for all the NAND commands issued during device identification. This includes NAND_CMD_PARAM which was recently changed to transfer up to 2048 bytes (for the redundant parameter pages). Thus, the initial chunk size should be 2048 as well. On Armada 370/XP platforms (NFCv2) booted without the keep-config devicetree property, this commit fixes a timeout on the NAND_CMD_PARAM command: [..] pxa3xx-nand f10d0000.nand: This platform can't do DMA on this device pxa3xx-nand f10d0000.nand: Wait time out!!! nand: device found, Manufacturer ID: 0x2c, Chip ID: 0x38 nand: Micron MT29F8G08ABABAWP nand: 1024 MiB, SLC, erase size: 512 KiB, page size: 4096, OOB size: 224 Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
-
Brian Norris authored
We need to be able to build the jz4740_nand driver. Signed-off-by: Brian Norris <computersforpeace@gmail.com>
-
Brian Norris authored
If multiple NAND chips are registered to the same controller, then when rebooting the system, the first one will grab the controller lock, while the second will wait forever for the first one to release it. i.e., a classic deadlock. This problem was solved for a similar case (suspend/resume) back in commit 6b0d9a84 ("mtd: nand: fix multi-chip suspend problem"), and the shutdown state really isn't much different for us, so rather than adding a new special case to nand_get_device(), we can just overload the FL_PM_SUSPENDED state. Now, multiple chips can "get" the same controller lock (preventing further I/O), while we still allow other chips to pass through nand_shutdown(). Original report: http://thread.gmane.org/gmane.linux.drivers.mtd/59726 http://lists.infradead.org/pipermail/linux-mtd/2015-July/059992.html Fixes: 72ea4036 ("mtd: nand: added nand_shutdown") Reported-by: Andrew E. Mileski <andrewm@isoar.ca> Signed-off-by: Brian Norris <computersforpeace@gmail.com> Cc: Scott Branden <sbranden@broadcom.com> Cc: Andrew E. Mileski <andrewm@isoar.ca> Acked-by: Scott Branden <sbranden@broadcom.com> Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
-
Brian Norris authored
Fallout from commit 832f5dac ("MIPS: Remove all the uses of custom gpio.h") We see errors like this: drivers/mtd/nand/jz4740_nand.c: In function 'jz_nand_detect_bank': drivers/mtd/nand/jz4740_nand.c:340:9: error: 'JZ_GPIO_MEM_CS0' undeclared (first use in this function) drivers/mtd/nand/jz4740_nand.c:340:9: note: each undeclared identifier is reported only once for each function it appears in drivers/mtd/nand/jz4740_nand.c:359:2: error: implicit declaration of function 'jz_gpio_set_function' [-Werror=implicit-function-declaration] drivers/mtd/nand/jz4740_nand.c:359:29: error: 'JZ_GPIO_FUNC_MEM_CS0' undeclared (first use in this function) drivers/mtd/nand/jz4740_nand.c:399:29: error: 'JZ_GPIO_FUNC_NONE' undeclared (first use in this function) drivers/mtd/nand/jz4740_nand.c: In function 'jz_nand_probe': drivers/mtd/nand/jz4740_nand.c:528:13: error: 'JZ_GPIO_MEM_CS0' undeclared (first use in this function) drivers/mtd/nand/jz4740_nand.c: In function 'jz_nand_remove': drivers/mtd/nand/jz4740_nand.c:555:14: error: 'JZ_GPIO_MEM_CS0' undeclared (first use in this function) Patched similarly to: https://patchwork.linux-mips.org/patch/11089/ Fixes: 832f5dac ("MIPS: Remove all the uses of custom gpio.h") Signed-off-by: Brian Norris <computersforpeace@gmail.com>
-
Brian Norris authored
Sync up with the upstream development. Signed-off-by: Brian Norris <computersforpeace@gmail.com>
-
Linus Torvalds authored
-
- 15 Nov, 2015 6 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf updates from Thomas Gleixner: "Mostly updates to the perf tool plus two fixes to the kernel core code: - Handle tracepoint filters correctly for inherited events (Peter Zijlstra) - Prevent a deadlock in perf_lock_task_context (Paul McKenney) - Add missing newlines to some pr_err() calls (Arnaldo Carvalho de Melo) - Print full source file paths when using 'perf annotate --print-line --full-paths' (Michael Petlan) - Fix 'perf probe -d' when just one out of uprobes and kprobes is enabled (Wang Nan) - Add compiler.h to list.h to fix 'make perf-tar-src-pkg' generated tarballs, i.e. out of tree building (Arnaldo Carvalho de Melo) - Add the llvm-src-base.c and llvm-src-kbuild.c files, generated by the 'perf test' LLVM entries, when running it in-tree, to .gitignore (Yunlong Song) - libbpf error reporting improvements, using a strerror interface to more precisely tell the user about problems with the provided scriptlet, be it in C or as a ready made object file (Wang Nan) - Do not be case sensitive when searching for matching 'perf test' entries (Arnaldo Carvalho de Melo) - Inform the user about objdump failures in 'perf annotate' (Andi Kleen) - Improve the LLVM 'perf test' entry, introduce a new ones for BPF and kbuild tests to check the environment used by clang to compile .c scriptlets (Wang Nan)" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (32 commits) perf/x86/intel/rapl: Remove the unused RAPL_EVENT_DESC() macro tools include: Add compiler.h to list.h perf probe: Verify parameters in two functions perf session: Add missing newlines to some pr_err() calls perf annotate: Support full source file paths for srcline fix perf test: Add llvm-src-base.c and llvm-src-kbuild.c to .gitignore perf: Fix inherited events vs. tracepoint filters perf: Disable IRQs across RCU RS CS that acquires scheduler lock perf test: Do not be case sensitive when searching for matching tests perf test: Add 'perf test BPF' perf test: Enhance the LLVM tests: add kbuild test perf test: Enhance the LLVM test: update basic BPF test program perf bpf: Improve BPF related error messages perf tools: Make fetch_kernel_version() publicly available bpf tools: Add new API bpf_object__get_kversion() bpf tools: Improve libbpf error reporting perf probe: Cleanup find_perf_probe_point_from_map to reduce redundancy perf annotate: Inform the user about objdump failures in --stdio perf stat: Make stat options global perf sched latency: Fix thread pid reuse issue ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fix from Thomas Gleixner: "A single fix to prevent math underflow in the numa balancing code" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/numa: Fix math underflow in task_tick_numa()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull liblockdep fixes from Thomas Gleixner: "Three small patches to synchronize liblockdep with the latest core changes" * 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tools/liblockdep: explicitly declare lockdep API we call from liblockdep tools/liblockdep: add userspace versions of WRITE_ONCE and RCU_INIT_POINTER tools/liblockdep: remove task argument from debug_check_no_locks_held
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Thomas Gleixner: "A couple of fixes and updates related to x86: - Fix the W+X check regression on XEN - The real fix for the low identity map trainwreck - Probe legacy PIC early instead of unconditionally allocating legacy irqs - Add cpu verification to long mode entry - Adjust the cache topology to AMD Fam17H systems - Let Merrifield use the TSC across S3" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/cpu: Call verify_cpu() after having entered long mode too x86/setup: Fix low identity map for >= 2GB kernel range x86/mm: Skip the hypervisor range when walking PGD x86/AMD: Fix last level cache topology for AMD Fam17h systems x86/irq: Probe for PIC presence before allocating descs for legacy IRQs x86/cpu/intel: Enable X86_FEATURE_NONSTOP_TSC_S3 for Merrifield
-
Linus Torvalds authored
Merge branches 'irq-urgent-for-linus' and 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq and timer fixes from Thomas Gleixner: - An irq regression fix to restore the wakeup behaviour of chained interrupts. - A timer fix for a long standing race versus timers scheduled on a target cpu which got exposed by recent changes in the workqueue implementation. * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq/PM: Restore system wake up from chained interrupts * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: timers: Use proper base migration in add_timer_on()
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds authored
Pull MIPS updates from Ralf Baechle: "These are the highlists of the main MIPS pull request for 4.4: - Add latencytop support - Support appended DTBs - VDSO support and initially use it for gettimeofday. - Drop the .MIPS.abiflags and ELF NOTE sections from vmlinux - Support for the 5KE, an internal test core. - Switch all MIPS platfroms to libata drivers. - Improved support, cleanups for ralink and Lantiq platforms. - Support for the new xilfpga platform. - A number of DTB improvments for BMIPS. - Improved support for CM and CPS. - Minor JZ4740 and BCM47xx enhancements" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (120 commits) MIPS: idle: add case for CPU_5KE MIPS: Octeon: Support APPENDED_DTB MIPS: vmlinux: create a section for appended DTB MIPS: Clean up compat_siginfo_t MIPS: Fix PAGE_MASK definition MIPS: BMIPS: Enable GZIP ramdisk and timed printks MIPS: Add xilfpga defconfig MIPS: xilfpga: Add mipsfpga platform code MIPS: xilfpga: Add xilfpga device tree files. dt-bindings: MIPS: Document xilfpga bindings and boot style MIPS: Make MIPS_CMDLINE_DTB default MIPS: Make the kernel arguments from dtb available MIPS: Use USE_OF as the guard for appended dtb MIPS: BCM63XX: Use pr_* instead of printk MIPS: Loongson: Cleanup CONFIG_LOONGSON_SUSPEND. MIPS: lantiq: Disable xbar fpi burst mode MIPS: lantiq: Force the crossbar to big endian MIPS: lantiq: Initialize the USB core on boot MIPS: lantiq: Return correct value for fpi clock on ar9 MIPS: ralink: Add missing clock on rt305x ...
-
- 14 Nov, 2015 3 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "Here are a collection of small fixes tha have been gathered for 4.4-rc1. The only significant changes are those in PCI drivers Kconfig, to use "depends on" instead of "select" for CONFIG_ZONE_DMA. A reverse select is often more user-friendly, but in this case, it makes hard to manage with the conflict with ZONE_DEVICE, so changed in such a way for now. Others are all small fixes and quirks: an error check in soundcore reigster_chrdev(), HD-audio HDMI/DP phantom jack fix, Intel Broxton DP quirk, USB-audio DSD device quirk, some constifications, etc" * tag 'sound-fix-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: pci: depend on ZONE_DMA ALSA: hda - Simplify phantom jack handling for HDMI/DP ALSA: hda/hdmi - apply Skylake fix-ups to Broxton display codec ALSA: ctxfi: constify rsc ops structures ALSA: usb: Add native DSD support for Aune X1S ALSA: oxfw: add an comment to Kconfig for TASCAM FireOne sound: fix check for error condition of register_chrdev()
-
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arcLinus Torvalds authored
Pull ARC fixes from Vineet Gupta: "Found a couple of brown paper bag bugs with the prev pull request (including a SMP build breakage report from Guenter). Since these are urgent I also decided to send over a bunch of other pending fixes which could have otherwise waited an rc or two. Summary: - A bunch of brown paper bag bugs (MAINTAINERS list email, SMP build failure) - cpu_relax() now compiler barrier for UP as well - handling of userspace Bus Errors for ARCompact builds" * tag 'arc-4.4-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: Fix silly typo in MAINTAINERS file ARC: cpu_relax() to be compiler barrier even for UP ARC: use ASL assembler mnemonic ARC: [arcompact] Handle bus error from userspace as Interrupt not exception ARC: remove extraneous header include ARCv2: lib: memcpy: use local symbols
-
Vineet Gupta authored
-