- 26 Sep, 2024 4 commits
-
-
Willem de Bruijn authored
Some packetdrill tests are flaky in debug mode. As discussed, increase tolerance. We have been doing this for debug builds outside ksft too. Previous setting was 10000. A manual 50 runs in virtme-ng showed two failures that needed 12000. To be on the safe side, Increase to 14000. Link: https://lore.kernel.org/netdev/Zuhhe4-MQHd3EkfN@mini-arch/ Fixes: 1e42f73f ("selftests/net: packetdrill: import tcp/zerocopy") Reported-by:
Stanislav Fomichev <sdf@fomichev.me> Signed-off-by:
Willem de Bruijn <willemb@google.com> Reviewed-by:
Simon Horman <horms@kernel.org> Acked-by:
Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20240919124412.3014326-1-willemdebruijn.kernel@gmail.comSigned-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Oliver Neukum authored
The work can submit URBs and the URBs can schedule the work. This cycle needs to be broken, when a device is to be stopped. Use a flag to do so. This is a design issue as old as the driver. Signed-off-by:
Oliver Neukum <oneukum@suse.com> Fixes: 1da177e4 ("Linux-2.6.12-rc2") CC: stable@vger.kernel.org Link: https://patch.msgid.link/20240919123525.688065-1-oneukum@suse.comSigned-off-by:
-
Furong Xu authored
Commit 5fabb012 ("net: stmmac: Add initial XDP support") sets PP_FLAG_DMA_SYNC_DEV flag for page_pool unconditionally, page_pool_recycle_direct() will call page_pool_dma_sync_for_device() on every page even the page is not going to be reused by XDP program. When XDP is not enabled, the page which holds the received buffer will be recycled once the buffer is copied into new SKB by skb_copy_to_linear_data(), then the MAC core will never reuse this page any longer. Always setting PP_FLAG_DMA_SYNC_DEV wastes CPU cycles on unnecessary calling of page_pool_dma_sync_for_device(). After this patch, up to 9% noticeable performance improvement was observed on certain platforms. Fixes: 5fabb012 ("net: stmmac: Add initial XDP support") Signed-off-by:
Furong Xu <0x1207@gmail.com> Link: https://patch.msgid.link/20240919121028.1348023-1-0x1207@gmail.comSigned-off-by:
-
Wenbo Li authored
Currently, the virtio-net driver will perform a pre-dma-mapping for small or mergeable RX buffer. But for small packets, a mismatched address without VIRTNET_RX_PAD and xdp_headroom is used for unmapping. That will result in unsynchronized buffers when SWIOTLB is enabled, for example, when running as a TDX guest. This patch unifies the address passed to the virtio core as the address of the virtnet header and fixes the mismatched buffer address. Changes from v2: unify the buf that passed to the virtio core in small and merge mode. Changes from v1: Use ctx to get xdp_headroom. Fixes: 295525e2 ("virtio_net: merge dma operations when filling mergeable buffers") Signed-off-by:
Wenbo Li <liwenbo.martin@bytedance.com> Signed-off-by:
Jiahui Cen <cenjiahui@bytedance.com> Signed-off-by:
Ying Fang <fangying.tommy@bytedance.com> Reviewed-by:
Xuan Zhuo <xuanzhuo@linux.alibaba.com> Link: https://patch.msgid.link/20240919081351.51772-1-liwenbo.martin@bytedance.comSigned-off-by:
-
- 24 Sep, 2024 10 commits
-
-
Jiwon Kim authored
syzbot reported a WARNING in bond_xdp_get_xmit_slave. To reproduce this[1], one bond device (bond1) has xdpdrv, which increases bpf_master_redirect_enabled_key. Another bond device (bond0) which is unsupported by XDP but its slave (veth3) has xdpgeneric that returns XDP_TX. This triggers WARN_ON_ONCE() from the xdp_master_redirect(). To reduce unnecessary warnings and improve log management, we need to delete the WARN_ON_ONCE() and add ratelimit to the netdev_err(). [1] Steps to reproduce: # Needs tx_xdp with return XDP_TX; ip l add veth0 type veth peer veth1 ip l add veth3 type veth peer veth4 ip l add bond0 type bond mode 6 # BOND_MODE_ALB, unsupported by XDP ip l add bond1 type bond # BOND_MODE_ROUNDROBIN by default ip l set veth0 master bond1 ip l set bond1 up # Increases bpf_master_redirect_enabled_key ip l set dev bond1 xdpdrv object tx_xdp.o section xdp_tx ip l set veth3 master bond0 ip l set bond0 up ip l set veth4 up # Triggers WARN_ON_ONCE() from the xdp_master_redirect() ip l set veth3 xdpgeneric object tx_xdp.o section xdp_tx Reported-by: syzbot+c187823a52ed505b2257@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=c187823a52ed505b2257 Fixes: 9e2ee5c7 ("net, bonding: Add XDP support to the bonding driver") Signed-off-by:Jiwon Kim <jiwonaid0@gmail.com> Signed-off-by:
Nikolay Aleksandrov <razor@blackwall.org> Link: https://patch.msgid.link/20240918140602.18644-1-jiwonaid0@gmail.comSigned-off-by:
-
Heiner Kallweit authored
Add a missing MODULE_FIRMWARE entry. Fixes: 69cb8998 ("r8169: add support for RTL8126A rev.b") Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Link: https://patch.msgid.link/bb307611-d129-43f5-a7ff-bdb6b4044fce@gmail.comSigned-off-by:
-
Paolo Abeni authored
Paul Barker says: ==================== Fix maximum TX/RX frame sizes in ravb driver These patches fix a couple of bugs in the maximum supported TX/RX frame sizes in the ravb driver. * For the GbEth IP, we were advertising a maximum TX frame size/MTU that was larger that the maximum the hardware can transmit. * For the R-Car AVB IP, we were unnecessarily setting the maximum RX frame size/MRU based on the MTU, which by default is smaller than the maximum the hardware can receive. For the R-Car AVB IP, the maximum TX frame size should be 2047 (not 2048), but additional work will be required to validate that change so it is not included in this series. Changes v2->v3: * Pick up Reviewed-by tag and suggested comment improvement from Niklas. Changes v1->v2: * Rebase on net tree as these are both bugfixes. * Pick up Reviewed-by tags. ==================== Link: https://patch.msgid.link/20240918081839.259-1-paul.barker.ct@bp.renesas.comSigned-off-by: -
Paul Barker authored
The RX frame size limit should not be based on the current MTU setting. Instead it should be based on the hardware capabilities. While we're here, improve the description of the receive frame length setting as suggested by Niklas. Fixes: c156633f ("Renesas Ethernet AVB driver proper") Reviewed-by:
Sergey Shtylyov <s.shtylyov@omp.ru> Reviewed-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by:
Paul Barker <paul.barker.ct@bp.renesas.com> Reviewed-by:
-
Paul Barker authored
The datasheets for all SoCs using the GbEth IP specify a maximum transmission frame size of 1.5 kByte. I've confirmed through internal discussions that support for 1522 byte frames has been validated, which allows us to support the default MTU of 1500 bytes after reserving space for the Ethernet header, frame checksums and an optional VLAN tag. Fixes: 2e95e08a ("ravb: Add rx_max_buf_size to struct ravb_hw_info") Reviewed-by:
-
KhaiWenTan authored
The commit b8c43360 ("net: stmmac: No need to calculate speed divider when offload is disabled") allows the "port_transmit_rate_kbps" to be set to a value of 0, which is then passed to the "div_s64" function when tc-cbs is disabled. This leads to a zero-division error. When tc-cbs is disabled, the idleslope, sendslope, and credit values the credit values are not required to be configured. Therefore, adding a return statement after setting the txQ mode to DCB when tc-cbs is disabled would prevent a zero-division error. Fixes: b8c43360 ("net: stmmac: No need to calculate speed divider when offload is disabled") Cc: <stable@vger.kernel.org> Co-developed-by:
Choong Yong Liang <yong.liang.choong@linux.intel.com> Signed-off-by:
KhaiWenTan <khai.wen.tan@linux.intel.com> Reviewed-by:
-
Heiner Kallweit authored
RTL8125 added fields to the tally counter, what may result in the chip dma'ing these new fields to unallocated memory. Therefore make sure that the allocated memory area is big enough to hold all of the tally counter values, even if we use only parts of it. Fixes: f1bce4ad ("r8169: add support for RTL8125") Cc: stable@vger.kernel.org Signed-off-by:
-
Daniel Golle authored
for_each_set_bit was used wrongly in aqr107_config_init() when iterating over LEDs. Drop misleading 'index' variable and call aqr_phy_led_active_low_set() for each set bit representing an LED which is driven by VDD instead of GND pin. Fixes: 61578f67 ("net: phy: aquantia: add support for PHY LEDs") Signed-off-by:
Daniel Golle <daniel@makrotopia.org> Reviewed-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://patch.msgid.link/9b1f0cd91f4cda54c8be56b4fe780480baf4aa0f.1726580902.git.daniel@makrotopia.orgSigned-off-by:
-
Daniel Golle authored
phy_modify_mmd was used wrongly in aqr_phy_led_active_low_set() resulting in a no-op instead of setting the VEND1_GLOBAL_LED_DRIVE_VDD bit. Correctly set VEND1_GLOBAL_LED_DRIVE_VDD bit. Fixes: 61578f67 ("net: phy: aquantia: add support for PHY LEDs") Signed-off-by:
-
Youssef Samir authored
When broadcasting data to multiple nodes via MHI, using skb_clone() causes all nodes to receive the same header data. This can result in packets being discarded by endpoints, leading to lost data. This issue occurs when a socket is closed, and a QRTR_TYPE_DEL_CLIENT packet is broadcasted. All nodes receive the same destination node ID, causing the node connected to the client to discard the packet and remain unaware of the client's deletion. Replace skb_clone() with pskb_copy(), to create a separate copy of the header for each sk_buff. Fixes: bdabad3e ("net: Add Qualcomm IPC router") Signed-off-by:
Youssef Samir <quic_yabdulra@quicinc.com> Reviewed-by:
Jeffery Hugo <quic_jhugo@quicinc.com> Reviewed-by:
Carl Vanderlip <quic_carlv@quicinc.com> Reviewed-by:
Chris Lew <quic_clew@quicinc.com> Link: https://patch.msgid.link/20240916170858.2382247-1-quic_yabdulra@quicinc.comSigned-off-by:
-
- 23 Sep, 2024 1 commit
-
-
Josh Hunt authored
We have some machines running stock Ubuntu 20.04.6 which is their 5.4.0-174-generic kernel that are running ceph and recently hit a null ptr dereference in tcp_rearm_rto(). Initially hitting it from the TLP path, but then later we also saw it getting hit from the RACK case as well. Here are examples of the oops messages we saw in each of those cases: Jul 26 15:05:02 rx [11061395.780353] BUG: kernel NULL pointer dereference, address: 0000000000000020 Jul 26 15:05:02 rx [11061395.787572] #PF: supervisor read access in kernel mode Jul 26 15:05:02 rx [11061395.792971] #PF: error_code(0x0000) - not-present page Jul 26 15:05:02 rx [11061395.798362] PGD 0 P4D 0 Jul 26 15:05:02 rx [11061395.801164] Oops: 0000 [#1] SMP NOPTI Jul 26 15:05:02 rx [11061395.805091] CPU: 0 PID: 9180 Comm: msgr-worker-1 Tainted: G W 5.4.0-174-generic #193-Ubuntu Jul 26 15:05:02 rx [11061395.814996] Hardware name: Supermicro SMC 2x26 os-gen8 64C NVME-Y 256G/H12SSW-NTR, BIOS 2.5.V1.2U.NVMe.UEFI 05/09/2023 Jul 26 15:05:02 rx [11061395.825952] RIP: 0010:tcp_rearm_rto+0xe4/0x160 Jul 26 15:05:02 rx [11061395.830656] Code: 87 ca 04 00 00 00 5b 41 5c 41 5d 5d c3 c3 49 8b bc 24 40 06 00 00 eb 8d 48 bb cf f7 53 e3 a5 9b c4 20 4c 89 ef e8 0c fe 0e 00 <48> 8b 78 20 48 c1 ef 03 48 89 f8 41 8b bc 24 80 04 00 00 48 f7 e3 Jul 26 15:05:02 rx [11061395.849665] RSP: 0018:ffffb75d40003e08 EFLAGS: 00010246 Jul 26 15:05:02 rx [11061395.855149] RAX: 0000000000000000 RBX: 20c49ba5e353f7cf RCX: 0000000000000000 Jul 26 15:05:02 rx [11061395.862542] RDX: 0000000062177c30 RSI: 000000000000231c RDI: ffff9874ad283a60 Jul 26 15:05:02 rx [11061395.869933] RBP: ffffb75d40003e20 R08: 0000000000000000 R09: ffff987605e20aa8 Jul 26 15:05:02 rx [11061395.877318] R10: ffffb75d40003f00 R11: ffffb75d4460f740 R12: ffff9874ad283900 Jul 26 15:05:02 rx [11061395.884710] R13: ffff9874ad283a60 R14: ffff9874ad283980 R15: ffff9874ad283d30 Jul 26 15:05:02 rx [11061395.892095] FS: 00007f1ef4a2e700(0000) GS:ffff987605e00000(0000) knlGS:0000000000000000 Jul 26 15:05:02 rx [11061395.900438] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 Jul 26 15:05:02 rx [11061395.906435] CR2: 0000000000000020 CR3: 0000003e450ba003 CR4: 0000000000760ef0 Jul 26 15:05:02 rx [11061395.913822] PKRU: 55555554 Jul 26 15:05:02 rx [11061395.916786] Call Trace: Jul 26 15:05:02 rx [11061395.919488] Jul 26 15:05:02 rx [11061395.921765] ? show_regs.cold+0x1a/0x1f Jul 26 15:05:02 rx [11061395.925859] ? __die+0x90/0xd9 Jul 26 15:05:02 rx [11061395.929169] ? no_context+0x196/0x380 Jul 26 15:05:02 rx [11061395.933088] ? ip6_protocol_deliver_rcu+0x4e0/0x4e0 Jul 26 15:05:02 rx [11061395.938216] ? ip6_sublist_rcv_finish+0x3d/0x50 Jul 26 15:05:02 rx [11061395.943000] ? __bad_area_nosemaphore+0x50/0x1a0 Jul 26 15:05:02 rx [11061395.947873] ? bad_area_nosemaphore+0x16/0x20 Jul 26 15:05:02 rx [11061395.952486] ? do_user_addr_fault+0x267/0x450 Jul 26 15:05:02 rx [11061395.957104] ? ipv6_list_rcv+0x112/0x140 Jul 26 15:05:02 rx [11061395.961279] ? __do_page_fault+0x58/0x90 Jul 26 15:05:02 rx [11061395.965458] ? do_page_fault+0x2c/0xe0 Jul 26 15:05:02 rx [11061395.969465] ? page_fault+0x34/0x40 Jul 26 15:05:02 rx [11061395.973217] ? tcp_rearm_rto+0xe4/0x160 Jul 26 15:05:02 rx [11061395.977313] ? tcp_rearm_rto+0xe4/0x160 Jul 26 15:05:02 rx [11061395.981408] tcp_send_loss_probe+0x10b/0x220 Jul 26 15:05:02 rx [11061395.985937] tcp_write_timer_handler+0x1b4/0x240 Jul 26 15:05:02 rx [11061395.990809] tcp_write_timer+0x9e/0xe0 Jul 26 15:05:02 rx [11061395.994814] ? tcp_write_timer_handler+0x240/0x240 Jul 26 15:05:02 rx [11061395.999866] call_timer_fn+0x32/0x130 Jul 26 15:05:02 rx [11061396.003782] __run_timers.part.0+0x180/0x280 Jul 26 15:05:02 rx [11061396.008309] ? recalibrate_cpu_khz+0x10/0x10 Jul 26 15:05:02 rx [11061396.012841] ? native_x2apic_icr_write+0x30/0x30 Jul 26 15:05:02 rx [11061396.017718] ? lapic_next_event+0x21/0x30 Jul 26 15:05:02 rx [11061396.021984] ? clockevents_program_event+0x8f/0xe0 Jul 26 15:05:02 rx [11061396.027035] run_timer_softirq+0x2a/0x50 Jul 26 15:05:02 rx [11061396.031212] __do_softirq+0xd1/0x2c1 Jul 26 15:05:02 rx [11061396.035044] do_softirq_own_stack+0x2a/0x40 Jul 26 15:05:02 rx [11061396.039480] Jul 26 15:05:02 rx [11061396.041840] do_softirq.part.0+0x46/0x50 Jul 26 15:05:02 rx [11061396.046022] __local_bh_enable_ip+0x50/0x60 Jul 26 15:05:02 rx [11061396.050460] _raw_spin_unlock_bh+0x1e/0x20 Jul 26 15:05:02 rx [11061396.054817] nf_conntrack_tcp_packet+0x29e/0xbe0 [nf_conntrack] Jul 26 15:05:02 rx [11061396.060994] ? get_l4proto+0xe7/0x190 [nf_conntrack] Jul 26 15:05:02 rx [11061396.066220] nf_conntrack_in+0xe9/0x670 [nf_conntrack] Jul 26 15:05:02 rx [11061396.071618] ipv6_conntrack_local+0x14/0x20 [nf_conntrack] Jul 26 15:05:02 rx [11061396.077356] nf_hook_slow+0x45/0xb0 Jul 26 15:05:02 rx [11061396.081098] ip6_xmit+0x3f0/0x5d0 Jul 26 15:05:02 rx [11061396.084670] ? ipv6_anycast_cleanup+0x50/0x50 Jul 26 15:05:02 rx [11061396.089282] ? __sk_dst_check+0x38/0x70 Jul 26 15:05:02 rx [11061396.093381] ? inet6_csk_route_socket+0x13b/0x200 Jul 26 15:05:02 rx [11061396.098346] inet6_csk_xmit+0xa7/0xf0 Jul 26 15:05:02 rx [11061396.102263] __tcp_transmit_skb+0x550/0xb30 Jul 26 15:05:02 rx [11061396.106701] tcp_write_xmit+0x3c6/0xc20 Jul 26 15:05:02 rx [11061396.110792] ? __alloc_skb+0x98/0x1d0 Jul 26 15:05:02 rx [11061396.114708] __tcp_push_pending_frames+0x37/0x100 Jul 26 15:05:02 rx [11061396.119667] tcp_push+0xfd/0x100 Jul 26 15:05:02 rx [11061396.123150] tcp_sendmsg_locked+0xc70/0xdd0 Jul 26 15:05:02 rx [11061396.127588] tcp_sendmsg+0x2d/0x50 Jul 26 15:05:02 rx [11061396.131245] inet6_sendmsg+0x43/0x70 Jul 26 15:05:02 rx [11061396.135075] __sock_sendmsg+0x48/0x70 Jul 26 15:05:02 rx [11061396.138994] ____sys_sendmsg+0x212/0x280 Jul 26 15:05:02 rx [11061396.143172] ___sys_sendmsg+0x88/0xd0 Jul 26 15:05:02 rx [11061396.147098] ? __seccomp_filter+0x7e/0x6b0 Jul 26 15:05:02 rx [11061396.151446] ? __switch_to+0x39c/0x460 Jul 26 15:05:02 rx [11061396.155453] ? __switch_to_asm+0x42/0x80 Jul 26 15:05:02 rx [11061396.159636] ? __switch_to_asm+0x5a/0x80 Jul 26 15:05:02 rx [11061396.163816] __sys_sendmsg+0x5c/0xa0 Jul 26 15:05:02 rx [11061396.167647] __x64_sys_sendmsg+0x1f/0x30 Jul 26 15:05:02 rx [11061396.171832] do_syscall_64+0x57/0x190 Jul 26 15:05:02 rx [11061396.175748] entry_SYSCALL_64_after_hwframe+0x5c/0xc1 Jul 26 15:05:02 rx [11061396.181055] RIP: 0033:0x7f1ef692618d Jul 26 15:05:02 rx [11061396.184893] Code: 28 89 54 24 1c 48 89 74 24 10 89 7c 24 08 e8 ca ee ff ff 8b 54 24 1c 48 8b 74 24 10 41 89 c0 8b 7c 24 08 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 2f 44 89 c7 48 89 44 24 08 e8 fe ee ff ff 48 Jul 26 15:05:02 rx [11061396.203889] RSP: 002b:00007f1ef4a26aa0 EFLAGS: 00000293 ORIG_RAX: 000000000000002e Jul 26 15:05:02 rx [11061396.211708] RAX: ffffffffffffffda RBX: 000000000000084b RCX: 00007f1ef692618d Jul 26 15:05:02 rx [11061396.219091] RDX: 0000000000004000 RSI: 00007f1ef4a26b10 RDI: 0000000000000275 Jul 26 15:05:02 rx [11061396.226475] RBP: 0000000000004000 R08: 0000000000000000 R09: 0000000000000020 Jul 26 15:05:02 rx [11061396.233859] R10: 0000000000000000 R11: 0000000000000293 R12: 000000000000084b Jul 26 15:05:02 rx [11061396.241243] R13: 00007f1ef4a26b10 R14: 0000000000000275 R15: 000055592030f1e8 Jul 26 15:05:02 rx [11061396.248628] Modules linked in: vrf bridge stp llc vxlan ip6_udp_tunnel udp_tunnel nls_iso8859_1 amd64_edac_mod edac_mce_amd kvm_amd kvm crct10dif_pclmul ghash_clmulni_intel aesni_intel crypto_simd cryptd glue_helper wmi_bmof ipmi_ssif input_leds joydev rndis_host cdc_ether usbnet mii ast drm_vram_helper ttm drm_kms_helper i2c_algo_bit fb_sys_fops syscopyarea sysfillrect sysimgblt ccp mac_hid ipmi_si ipmi_devintf ipmi_msghandler nft_ct sch_fq_codel nf_tables_set nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nf_tables nfnetlink ramoops reed_solomon efi_pstore drm ip_tables x_tables autofs4 raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid0 multipath linear mlx5_ib ib_uverbs ib_core raid1 mlx5_core hid_generic pci_hyperv_intf crc32_pclmul tls usbhid ahci mlxfw bnxt_en libahci hid nvme i2c_piix4 nvme_core wmi Jul 26 15:05:02 rx [11061396.324334] CR2: 0000000000000020 Jul 26 15:05:02 rx [11061396.327944] ---[ end trace 68a2b679d1cfb4f1 ]--- Jul 26 15:05:02 rx [11061396.433435] RIP: 0010:tcp_rearm_rto+0xe4/0x160 Jul 26 15:05:02 rx [11061396.438137] Code: 87 ca 04 00 00 00 5b 41 5c 41 5d 5d c3 c3 49 8b bc 24 40 06 00 00 eb 8d 48 bb cf f7 53 e3 a5 9b c4 20 4c 89 ef e8 0c fe 0e 00 <48> 8b 78 20 48 c1 ef 03 48 89 f8 41 8b bc 24 80 04 00 00 48 f7 e3 Jul 26 15:05:02 rx [11061396.457144] RSP: 0018:ffffb75d40003e08 EFLAGS: 00010246 Jul 26 15:05:02 rx [11061396.462629] RAX: 0000000000000000 RBX: 20c49ba5e353f7cf RCX: 0000000000000000 Jul 26 15:05:02 rx [11061396.470012] RDX: 0000000062177c30 RSI: 000000000000231c RDI: ffff9874ad283a60 Jul 26 15:05:02 rx [11061396.477396] RBP: ffffb75d40003e20 R08: 0000000000000000 R09: ffff987605e20aa8 Jul 26 15:05:02 rx [11061396.484779] R10: ffffb75d40003f00 R11: ffffb75d4460f740 R12: ffff9874ad283900 Jul 26 15:05:02 rx [11061396.492164] R13: ffff9874ad283a60 R14: ffff9874ad283980 R15: ffff9874ad283d30 Jul 26 15:05:02 rx [11061396.499547] FS: 00007f1ef4a2e700(0000) GS:ffff987605e00000(0000) knlGS:0000000000000000 Jul 26 15:05:02 rx [11061396.507886] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 Jul 26 15:05:02 rx [11061396.513884] CR2: 0000000000000020 CR3: 0000003e450ba003 CR4: 0000000000760ef0 Jul 26 15:05:02 rx [11061396.521267] PKRU: 55555554 Jul 26 15:05:02 rx [11061396.524230] Kernel panic - not syncing: Fatal exception in interrupt Jul 26 15:05:02 rx [11061396.530885] Kernel Offset: 0x1b200000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) Jul 26 15:05:03 rx [11061396.660181] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]--- After we hit this we disabled TLP by setting tcp_early_retrans to 0 and then hit the crash in the RACK case: Aug 7 07:26:16 rx [1006006.265582] BUG: kernel NULL pointer dereference, address: 0000000000000020 Aug 7 07:26:16 rx [1006006.272719] #PF: supervisor read access in kernel mode Aug 7 07:26:16 rx [1006006.278030] #PF: error_code(0x0000) - not-present page Aug 7 07:26:16 rx [1006006.283343] PGD 0 P4D 0 Aug 7 07:26:16 rx [1006006.286057] Oops: 0000 [#1] SMP NOPTI Aug 7 07:26:16 rx [1006006.289896] CPU: 5 PID: 0 Comm: swapper/5 Tainted: G W 5.4.0-174-generic #193-Ubuntu Aug 7 07:26:16 rx [1006006.299107] Hardware name: Supermicro SMC 2x26 os-gen8 64C NVME-Y 256G/H12SSW-NTR, BIOS 2.5.V1.2U.NVMe.UEFI 05/09/2023 Aug 7 07:26:16 rx [1006006.309970] RIP: 0010:tcp_rearm_rto+0xe4/0x160 Aug 7 07:26:16 rx [1006006.314584] Code: 87 ca 04 00 00 00 5b 41 5c 41 5d 5d c3 c3 49 8b bc 24 40 06 00 00 eb 8d 48 bb cf f7 53 e3 a5 9b c4 20 4c 89 ef e8 0c fe 0e 00 <48> 8b 78 20 48 c1 ef 03 48 89 f8 41 8b bc 24 80 04 00 00 48 f7 e3 Aug 7 07:26:16 rx [1006006.333499] RSP: 0018:ffffb42600a50960 EFLAGS: 00010246 Aug 7 07:26:16 rx [1006006.338895] RAX: 0000000000000000 RBX: 20c49ba5e353f7cf RCX: 0000000000000000 Aug 7 07:26:16 rx [1006006.346193] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff92d687ed8160 Aug 7 07:26:16 rx [1006006.353489] RBP: ffffb42600a50978 R08: 0000000000000000 R09: 00000000cd896dcc Aug 7 07:26:16 rx [1006006.360786] R10: ffff92dc3404f400 R11: 0000000000000001 R12: ffff92d687ed8000 Aug 7 07:26:16 rx [1006006.368084] R13: ffff92d687ed8160 R14: 00000000cd896dcc R15: 00000000cd8fca81 Aug 7 07:26:16 rx [1006006.375381] FS: 0000000000000000(0000) GS:ffff93158ad40000(0000) knlGS:0000000000000000 Aug 7 07:26:16 rx [1006006.383632] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 Aug 7 07:26:16 rx [1006006.389544] CR2: 0000000000000020 CR3: 0000003e775ce006 CR4: 0000000000760ee0 Aug 7 07:26:16 rx [1006006.396839] PKRU: 55555554 Aug 7 07:26:16 rx [1006006.399717] Call Trace: Aug 7 07:26:16 rx [1006006.402335] Aug 7 07:26:16 rx [1006006.404525] ? show_regs.cold+0x1a/0x1f Aug 7 07:26:16 rx [1006006.408532] ? __die+0x90/0xd9 Aug 7 07:26:16 rx [1006006.411760] ? no_context+0x196/0x380 Aug 7 07:26:16 rx [1006006.415599] ? __bad_area_nosemaphore+0x50/0x1a0 Aug 7 07:26:16 rx [1006006.420392] ? _raw_spin_lock+0x1e/0x30 Aug 7 07:26:16 rx [1006006.424401] ? bad_area_nosemaphore+0x16/0x20 Aug 7 07:26:16 rx [1006006.428927] ? do_user_addr_fault+0x267/0x450 Aug 7 07:26:16 rx [1006006.433450] ? __do_page_fault+0x58/0x90 Aug 7 07:26:16 rx [1006006.437542] ? do_page_fault+0x2c/0xe0 Aug 7 07:26:16 rx [1006006.441470] ? page_fault+0x34/0x40 Aug 7 07:26:16 rx [1006006.445134] ? tcp_rearm_rto+0xe4/0x160 Aug 7 07:26:16 rx [1006006.449145] tcp_ack+0xa32/0xb30 Aug 7 07:26:16 rx [1006006.452542] tcp_rcv_established+0x13c/0x670 Aug 7 07:26:16 rx [1006006.456981] ? sk_filter_trim_cap+0x48/0x220 Aug 7 07:26:16 rx [1006006.461419] tcp_v6_do_rcv+0xdb/0x450 Aug 7 07:26:16 rx [1006006.465257] tcp_v6_rcv+0xc2b/0xd10 Aug 7 07:26:16 rx [1006006.468918] ip6_protocol_deliver_rcu+0xd3/0x4e0 Aug 7 07:26:16 rx [1006006.473706] ip6_input_finish+0x15/0x20 Aug 7 07:26:16 rx [1006006.477710] ip6_input+0xa2/0xb0 Aug 7 07:26:16 rx [1006006.481109] ? ip6_protocol_deliver_rcu+0x4e0/0x4e0 Aug 7 07:26:16 rx [1006006.486151] ip6_sublist_rcv_finish+0x3d/0x50 Aug 7 07:26:16 rx [1006006.490679] ip6_sublist_rcv+0x1aa/0x250 Aug 7 07:26:16 rx [1006006.494779] ? ip6_rcv_finish_core.isra.0+0xa0/0xa0 Aug 7 07:26:16 rx [1006006.499828] ipv6_list_rcv+0x112/0x140 Aug 7 07:26:16 rx [1006006.503748] __netif_receive_skb_list_core+0x1a4/0x250 Aug 7 07:26:16 rx [1006006.509057] netif_receive_skb_list_internal+0x1a1/0x2b0 Aug 7 07:26:16 rx [1006006.514538] gro_normal_list.part.0+0x1e/0x40 Aug 7 07:26:16 rx [1006006.519068] napi_complete_done+0x91/0x130 Aug 7 07:26:16 rx [1006006.523352] mlx5e_napi_poll+0x18e/0x610 [mlx5_core] Aug 7 07:26:16 rx [1006006.528481] net_rx_action+0x142/0x390 Aug 7 07:26:16 rx [1006006.532398] __do_softirq+0xd1/0x2c1 Aug 7 07:26:16 rx [1006006.536142] irq_exit+0xae/0xb0 Aug 7 07:26:16 rx [1006006.539452] do_IRQ+0x5a/0xf0 Aug 7 07:26:16 rx [1006006.542590] common_interrupt+0xf/0xf Aug 7 07:26:16 rx [1006006.546421] Aug 7 07:26:16 rx [1006006.548695] RIP: 0010:native_safe_halt+0xe/0x10 Aug 7 07:26:16 rx [1006006.553399] Code: 7b ff ff ff eb bd 90 90 90 90 90 90 e9 07 00 00 00 0f 00 2d 36 2c 50 00 f4 c3 66 90 e9 07 00 00 00 0f 00 2d 26 2c 50 00 fb f4 90 0f 1f 44 00 00 55 48 89 e5 41 55 41 54 53 e8 dd 5e 61 ff 65 Aug 7 07:26:16 rx [1006006.572309] RSP: 0018:ffffb42600177e70 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffc2 Aug 7 07:26:16 rx [1006006.580040] RAX: ffffffff8ed08b20 RBX: 0000000000000005 RCX: 0000000000000001 Aug 7 07:26:16 rx [1006006.587337] RDX: 00000000f48eeca2 RSI: 0000000000000082 RDI: 0000000000000082 Aug 7 07:26:16 rx [1006006.594635] RBP: ffffb42600177e90 R08: 0000000000000000 R09: 000000000000020f Aug 7 07:26:16 rx [1006006.601931] R10: 0000000000100000 R11: 0000000000000000 R12: 0000000000000005 Aug 7 07:26:16 rx [1006006.609229] R13: ffff93157deb5f00 R14: 0000000000000000 R15: 0000000000000000 Aug 7 07:26:16 rx [1006006.616530] ? __cpuidle_text_start+0x8/0x8 Aug 7 07:26:16 rx [1006006.620886] ? default_idle+0x20/0x140 Aug 7 07:26:16 rx [1006006.624804] arch_cpu_idle+0x15/0x20 Aug 7 07:26:16 rx [1006006.628545] default_idle_call+0x23/0x30 Aug 7 07:26:16 rx [1006006.632640] do_idle+0x1fb/0x270 Aug 7 07:26:16 rx [1006006.636035] cpu_startup_entry+0x20/0x30 Aug 7 07:26:16 rx [1006006.640126] start_secondary+0x178/0x1d0 Aug 7 07:26:16 rx [1006006.644218] secondary_startup_64+0xa4/0xb0 Aug 7 07:26:17 rx [1006006.648568] Modules linked in: vrf bridge stp llc vxlan ip6_udp_tunnel udp_tunnel nls_iso8859_1 nft_ct amd64_edac_mod edac_mce_amd kvm_amd kvm crct10dif_pclmul ghash_clmulni_intel aesni_intel crypto_simd cryptd glue_helper wmi_bmof ipmi_ssif input_leds joydev rndis_host cdc_ether usbnet ast mii drm_vram_helper ttm drm_kms_helper i2c_algo_bit fb_sys_fops syscopyarea sysfillrect sysimgblt ccp mac_hid ipmi_si ipmi_devintf ipmi_msghandler sch_fq_codel nf_tables_set nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nf_tables nfnetlink ramoops reed_solomon efi_pstore drm ip_tables x_tables autofs4 raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid0 multipath linear mlx5_ib ib_uverbs ib_core raid1 hid_generic mlx5_core pci_hyperv_intf crc32_pclmul usbhid ahci tls mlxfw bnxt_en hid libahci nvme i2c_piix4 nvme_core wmi [last unloaded: cpuid] Aug 7 07:26:17 rx [1006006.726180] CR2: 0000000000000020 Aug 7 07:26:17 rx [1006006.729718] ---[ end trace e0e2e37e4e612984 ]--- Prior to seeing the first crash and on other machines we also see the warning in tcp_send_loss_probe() where packets_out is non-zero, but both transmit and retrans queues are empty so we know the box is seeing some accounting issue in this area: Jul 26 09:15:27 kernel: ------------[ cut here ]------------ Jul 26 09:15:27 kernel: invalid inflight: 2 state 1 cwnd 68 mss 8988 Jul 26 09:15:27 kernel: WARNING: CPU: 16 PID: 0 at net/ipv4/tcp_output.c:2605 tcp_send_loss_probe+0x214/0x220 Jul 26 09:15:27 kernel: Modules linked in: vrf bridge stp llc vxlan ip6_udp_tunnel udp_tunnel nls_iso8859_1 nft_ct amd64_edac_mod edac_mce_amd kvm_amd kvm crct10dif_pclmul ghash_clmulni_intel aesni_intel crypto_simd cryptd glue_helper wmi_bmof ipmi_ssif joydev input_leds rndis_host cdc_ether usbnet mii ast drm_vram_helper ttm drm_kms_he> Jul 26 09:15:27 kernel: CPU: 16 PID: 0 Comm: swapper/16 Not tainted 5.4.0-174-generic #193-Ubuntu Jul 26 09:15:27 kernel: Hardware name: Supermicro SMC 2x26 os-gen8 64C NVME-Y 256G/H12SSW-NTR, BIOS 2.5.V1.2U.NVMe.UEFI 05/09/2023 Jul 26 09:15:27 kernel: RIP: 0010:tcp_send_loss_probe+0x214/0x220 Jul 26 09:15:27 kernel: Code: 08 26 01 00 75 e2 41 0f b6 54 24 12 41 8b 8c 24 c0 06 00 00 45 89 f0 48 c7 c7 e0 b4 20 a7 c6 05 8d 08 26 01 01 e8 4a c0 0f 00 <0f> 0b eb ba 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 55 48 89 e5 41 Jul 26 09:15:27 kernel: RSP: 0018:ffffb7838088ce00 EFLAGS: 00010286 Jul 26 09:15:27 kernel: RAX: 0000000000000000 RBX: ffff9b84b5630430 RCX: 0000000000000006 Jul 26 09:15:27 kernel: RDX: 0000000000000007 RSI: 0000000000000096 RDI: ffff9b8e4621c8c0 Jul 26 09:15:27 kernel: RBP: ffffb7838088ce18 R08: 0000000000000927 R09: 0000000000000004 Jul 26 09:15:27 kernel: R10: 0000000000000000 R11: 0000000000000001 R12: ffff9b84b5630000 Jul 26 09:15:27 kernel: R13: 0000000000000000 R14: 000000000000231c R15: ffff9b84b5630430 Jul 26 09:15:27 kernel: FS: 0000000000000000(0000) GS:ffff9b8e46200000(0000) knlGS:0000000000000000 Jul 26 09:15:27 kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 Jul 26 09:15:27 kernel: CR2: 000056238cec2380 CR3: 0000003e49ede005 CR4: 0000000000760ee0 Jul 26 09:15:27 kernel: PKRU: 55555554 Jul 26 09:15:27 kernel: Call Trace: Jul 26 09:15:27 kernel: <IRQ> Jul 26 09:15:27 kernel: ? show_regs.cold+0x1a/0x1f Jul 26 09:15:27 kernel: ? __warn+0x98/0xe0 Jul 26 09:15:27 kernel: ? tcp_send_loss_probe+0x214/0x220 Jul 26 09:15:27 kernel: ? report_bug+0xd1/0x100 Jul 26 09:15:27 kernel: ? do_error_trap+0x9b/0xc0 Jul 26 09:15:27 kernel: ? do_invalid_op+0x3c/0x50 Jul 26 09:15:27 kernel: ? tcp_send_loss_probe+0x214/0x220 Jul 26 09:15:27 kernel: ? invalid_op+0x1e/0x30 Jul 26 09:15:27 kernel: ? tcp_send_loss_probe+0x214/0x220 Jul 26 09:15:27 kernel: tcp_write_timer_handler+0x1b4/0x240 Jul 26 09:15:27 kernel: tcp_write_timer+0x9e/0xe0 Jul 26 09:15:27 kernel: ? tcp_write_timer_handler+0x240/0x240 Jul 26 09:15:27 kernel: call_timer_fn+0x32/0x130 Jul 26 09:15:27 kernel: __run_timers.part.0+0x180/0x280 Jul 26 09:15:27 kernel: ? timerqueue_add+0x9b/0xb0 Jul 26 09:15:27 kernel: ? enqueue_hrtimer+0x3d/0x90 Jul 26 09:15:27 kernel: ? do_error_trap+0x9b/0xc0 Jul 26 09:15:27 kernel: ? do_invalid_op+0x3c/0x50 Jul 26 09:15:27 kernel: ? tcp_send_loss_probe+0x214/0x220 Jul 26 09:15:27 kernel: ? invalid_op+0x1e/0x30 Jul 26 09:15:27 kernel: ? tcp_send_loss_probe+0x214/0x220 Jul 26 09:15:27 kernel: tcp_write_timer_handler+0x1b4/0x240 Jul 26 09:15:27 kernel: tcp_write_timer+0x9e/0xe0 Jul 26 09:15:27 kernel: ? tcp_write_timer_handler+0x240/0x240 Jul 26 09:15:27 kernel: call_timer_fn+0x32/0x130 Jul 26 09:15:27 kernel: __run_timers.part.0+0x180/0x280 Jul 26 09:15:27 kernel: ? timerqueue_add+0x9b/0xb0 Jul 26 09:15:27 kernel: ? enqueue_hrtimer+0x3d/0x90 Jul 26 09:15:27 kernel: ? recalibrate_cpu_khz+0x10/0x10 Jul 26 09:15:27 kernel: ? ktime_get+0x3e/0xa0 Jul 26 09:15:27 kernel: ? native_x2apic_icr_write+0x30/0x30 Jul 26 09:15:27 kernel: run_timer_softirq+0x2a/0x50 Jul 26 09:15:27 kernel: __do_softirq+0xd1/0x2c1 Jul 26 09:15:27 kernel: irq_exit+0xae/0xb0 Jul 26 09:15:27 kernel: smp_apic_timer_interrupt+0x7b/0x140 Jul 26 09:15:27 kernel: apic_timer_interrupt+0xf/0x20 Jul 26 09:15:27 kernel: </IRQ> Jul 26 09:15:27 kernel: RIP: 0010:native_safe_halt+0xe/0x10 Jul 26 09:15:27 kernel: Code: 7b ff ff ff eb bd 90 90 90 90 90 90 e9 07 00 00 00 0f 00 2d 36 2c 50 00 f4 c3 66 90 e9 07 00 00 00 0f 00 2d 26 2c 50 00 fb f4 <c3> 90 0f 1f 44 00 00 55 48 89 e5 41 55 41 54 53 e8 dd 5e 61 ff 65 Jul 26 09:15:27 kernel: RSP: 0018:ffffb783801cfe70 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13 Jul 26 09:15:27 kernel: RAX: ffffffffa6908b20 RBX: 0000000000000010 RCX: 0000000000000001 Jul 26 09:15:27 kernel: RDX: 000000006fc0c97e RSI: 0000000000000082 RDI: 0000000000000082 Jul 26 09:15:27 kernel: RBP: ffffb783801cfe90 R08: 0000000000000000 R09: 0000000000000225 Jul 26 09:15:27 kernel: R10: 0000000000100000 R11: 0000000000000000 R12: 0000000000000010 Jul 26 09:15:27 kernel: R13: ffff9b8e390b0000 R14: 0000000000000000 R15: 0000000000000000 Jul 26 09:15:27 kernel: ? __cpuidle_text_start+0x8/0x8 Jul 26 09:15:27 kernel: ? default_idle+0x20/0x140 Jul 26 09:15:27 kernel: arch_cpu_idle+0x15/0x20 Jul 26 09:15:27 kernel: default_idle_call+0x23/0x30 Jul 26 09:15:27 kernel: do_idle+0x1fb/0x270 Jul 26 09:15:27 kernel: cpu_startup_entry+0x20/0x30 Jul 26 09:15:27 kernel: start_secondary+0x178/0x1d0 Jul 26 09:15:27 kernel: secondary_startup_64+0xa4/0xb0 Jul 26 09:15:27 kernel: ---[ end trace e7ac822987e33be1 ]--- The NULL ptr deref is coming from tcp_rto_delta_us() attempting to pull an skb off the head of the retransmit queue and then dereferencing that skb to get the skb_mstamp_ns value via tcp_skb_timestamp_us(skb). The crash is the same one that was reported a # of years ago here: https://lore.kernel.org/netdev/86c0f836-9a7c-438b-d81a-839be45f1f58@gmail.com/T/#t and the kernel we're running has the fix which was added to resolve this issue. Unfortunately we've been unsuccessful so far in reproducing this problem in the lab and do not have the luxury of pushing out a new kernel to try and test if newer kernels resolve this issue at the moment. I realize this is a report against both an Ubuntu kernel and also an older 5.4 kernel. I have reported this issue to Ubuntu here: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2077657 however I feel like since this issue has possibly cropped up again it makes sense to build in some protection in this path (even on the latest kernel versions) since the code in question just blindly assumes there's a valid skb without testing if it's NULL b/f it looks at the timestamp. Given we have seen crashes in this path before and now this case it seems like we should protect ourselves for when packets_out accounting is incorrect. While we should fix that root cause we should also just make sure the skb is not NULL before dereferencing it. Also add a warn once here to capture some information if/when the problem case is hit again. Fixes: e1a10ef7 ("tcp: introduce tcp_rto_delta_us() helper for xmit timer fix") Signed-off-by:
Josh Hunt <johunt@akamai.com> Acked-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 22 Sep, 2024 2 commits
-
-
Lukas Bulwahn authored
Commit aa58bec0 ("net: ethernet: oa_tc6: implement register write operation") adds two new file entries to OPEN ALLIANCE 10BASE-T1S MACPHY SERIAL INTERFACE FRAMEWORK. One of the two entries mistakenly refers to drivers/include/linux/oa_tc6.h, whereas the intent is clearly to refer to include/linux/oa_tc6.h. Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about a broken reference. Adjust the file entry to the intended location. Signed-off-by:
Lukas Bulwahn <lukas.bulwahn@redhat.com> Reviewed-by:
-
Thomas Weißschuh authored
The rpl sr tunnel code contains calls to dst_cache_*() which are only present when the dst cache is built. Select DST_CACHE to build the dst cache, similar to other kconfig options in the same file. Compiling the rpl sr tunnel without DST_CACHE will lead to linker errors. Fixes: a7a29f9c ("net: ipv6: add rpl sr tunnel") Signed-off-by:
Thomas Weißschuh <thomas.weissschuh@linutronix.de> Reviewed-by:
-
- 19 Sep, 2024 5 commits
-
-
Kaixin Wang authored
In the ether3_probe function, a timer is initialized with a callback function ether3_ledoff, bound to &prev(dev)->timer. Once the timer is started, there is a risk of a race condition if the module or device is removed, triggering the ether3_remove function to perform cleanup. The sequence of operations that may lead to a UAF bug is as follows: CPU0 CPU1 | ether3_ledoff ether3_remove | free_netdev(dev); | put_devic | kfree(dev); | | ether3_outw(priv(dev)->regs.config2 |= CFG2_CTRLO, REG_CONFIG2); | // use dev Fix it by ensuring that the timer is canceled before proceeding with the cleanup in ether3_remove. Fixes: 6fd9c53f ("net: seeq: Convert timers to use timer_setup()") Signed-off-by:Kaixin Wang <kxwang23@m.fudan.edu.cn> Link: https://patch.msgid.link/20240915144045.451-1-kxwang23@m.fudan.edu.cnSigned-off-by:
-
Eric Dumazet authored
syzbot reported that nf_reject_ip6_tcphdr_put() was possibly sending garbage on the four reserved tcp bits (th->res1) Use skb_put_zero() to clear the whole TCP header, as done in nf_reject_ip_tcphdr_put() BUG: KMSAN: uninit-value in nf_reject_ip6_tcphdr_put+0x688/0x6c0 net/ipv6/netfilter/nf_reject_ipv6.c:255 nf_reject_ip6_tcphdr_put+0x688/0x6c0 net/ipv6/netfilter/nf_reject_ipv6.c:255 nf_send_reset6+0xd84/0x15b0 net/ipv6/netfilter/nf_reject_ipv6.c:344 nft_reject_inet_eval+0x3c1/0x880 net/netfilter/nft_reject_inet.c:48 expr_call_ops_eval net/netfilter/nf_tables_core.c:240 [inline] nft_do_chain+0x438/0x22a0 net/netfilter/nf_tables_core.c:288 nft_do_chain_inet+0x41a/0x4f0 net/netfilter/nft_chain_filter.c:161 nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline] nf_hook_slow+0xf4/0x400 net/netfilter/core.c:626 nf_hook include/linux/netfilter.h:269 [inline] NF_HOOK include/linux/netfilter.h:312 [inline] ipv6_rcv+0x29b/0x390 net/ipv6/ip6_input.c:310 __netif_receive_skb_one_core net/core/dev.c:5661 [inline] __netif_receive_skb+0x1da/0xa00 net/core/dev.c:5775 process_backlog+0x4ad/0xa50 net/core/dev.c:6108 __napi_poll+0xe7/0x980 net/core/dev.c:6772 napi_poll net/core/dev.c:6841 [inline] net_rx_action+0xa5a/0x19b0 net/core/dev.c:6963 handle_softirqs+0x1ce/0x800 kernel/softirq.c:554 __do_softirq+0x14/0x1a kernel/softirq.c:588 do_softirq+0x9a/0x100 kernel/softirq.c:455 __local_bh_enable_ip+0x9f/0xb0 kernel/softirq.c:382 local_bh_enable include/linux/bottom_half.h:33 [inline] rcu_read_unlock_bh include/linux/rcupdate.h:908 [inline] __dev_queue_xmit+0x2692/0x5610 net/core/dev.c:4450 dev_queue_xmit include/linux/netdevice.h:3105 [inline] neigh_resolve_output+0x9ca/0xae0 net/core/neighbour.c:1565 neigh_output include/net/neighbour.h:542 [inline] ip6_finish_output2+0x2347/0x2ba0 net/ipv6/ip6_output.c:141 __ip6_finish_output net/ipv6/ip6_output.c:215 [inline] ip6_finish_output+0xbb8/0x14b0 net/ipv6/ip6_output.c:226 NF_HOOK_COND include/linux/netfilter.h:303 [inline] ip6_output+0x356/0x620 net/ipv6/ip6_output.c:247 dst_output include/net/dst.h:450 [inline] NF_HOOK include/linux/netfilter.h:314 [inline] ip6_xmit+0x1ba6/0x25d0 net/ipv6/ip6_output.c:366 inet6_csk_xmit+0x442/0x530 net/ipv6/inet6_connection_sock.c:135 __tcp_transmit_skb+0x3b07/0x4880 net/ipv4/tcp_output.c:1466 tcp_transmit_skb net/ipv4/tcp_output.c:1484 [inline] tcp_connect+0x35b6/0x7130 net/ipv4/tcp_output.c:4143 tcp_v6_connect+0x1bcc/0x1e40 net/ipv6/tcp_ipv6.c:333 __inet_stream_connect+0x2ef/0x1730 net/ipv4/af_inet.c:679 inet_stream_connect+0x6a/0xd0 net/ipv4/af_inet.c:750 __sys_connect_file net/socket.c:2061 [inline] __sys_connect+0x606/0x690 net/socket.c:2078 __do_sys_connect net/socket.c:2088 [inline] __se_sys_connect net/socket.c:2085 [inline] __x64_sys_connect+0x91/0xe0 net/socket.c:2085 x64_sys_call+0x27a5/0x3ba0 arch/x86/include/generated/asm/syscalls_64.h:43 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Uninit was stored to memory at: nf_reject_ip6_tcphdr_put+0x60c/0x6c0 net/ipv6/netfilter/nf_reject_ipv6.c:249 nf_send_reset6+0xd84/0x15b0 net/ipv6/netfilter/nf_reject_ipv6.c:344 nft_reject_inet_eval+0x3c1/0x880 net/netfilter/nft_reject_inet.c:48 expr_call_ops_eval net/netfilter/nf_tables_core.c:240 [inline] nft_do_chain+0x438/0x22a0 net/netfilter/nf_tables_core.c:288 nft_do_chain_inet+0x41a/0x4f0 net/netfilter/nft_chain_filter.c:161 nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline] nf_hook_slow+0xf4/0x400 net/netfilter/core.c:626 nf_hook include/linux/netfilter.h:269 [inline] NF_HOOK include/linux/netfilter.h:312 [inline] ipv6_rcv+0x29b/0x390 net/ipv6/ip6_input.c:310 __netif_receive_skb_one_core net/core/dev.c:5661 [inline] __netif_receive_skb+0x1da/0xa00 net/core/dev.c:5775 process_backlog+0x4ad/0xa50 net/core/dev.c:6108 __napi_poll+0xe7/0x980 net/core/dev.c:6772 napi_poll net/core/dev.c:6841 [inline] net_rx_action+0xa5a/0x19b0 net/core/dev.c:6963 handle_softirqs+0x1ce/0x800 kernel/softirq.c:554 __do_softirq+0x14/0x1a kernel/softirq.c:588 Uninit was stored to memory at: nf_reject_ip6_tcphdr_put+0x2ca/0x6c0 net/ipv6/netfilter/nf_reject_ipv6.c:231 nf_send_reset6+0xd84/0x15b0 net/ipv6/netfilter/nf_reject_ipv6.c:344 nft_reject_inet_eval+0x3c1/0x880 net/netfilter/nft_reject_inet.c:48 expr_call_ops_eval net/netfilter/nf_tables_core.c:240 [inline] nft_do_chain+0x438/0x22a0 net/netfilter/nf_tables_core.c:288 nft_do_chain_inet+0x41a/0x4f0 net/netfilter/nft_chain_filter.c:161 nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline] nf_hook_slow+0xf4/0x400 net/netfilter/core.c:626 nf_hook include/linux/netfilter.h:269 [inline] NF_HOOK include/linux/netfilter.h:312 [inline] ipv6_rcv+0x29b/0x390 net/ipv6/ip6_input.c:310 __netif_receive_skb_one_core net/core/dev.c:5661 [inline] __netif_receive_skb+0x1da/0xa00 net/core/dev.c:5775 process_backlog+0x4ad/0xa50 net/core/dev.c:6108 __napi_poll+0xe7/0x980 net/core/dev.c:6772 napi_poll net/core/dev.c:6841 [inline] net_rx_action+0xa5a/0x19b0 net/core/dev.c:6963 handle_softirqs+0x1ce/0x800 kernel/softirq.c:554 __do_softirq+0x14/0x1a kernel/softirq.c:588 Uninit was created at: slab_post_alloc_hook mm/slub.c:3998 [inline] slab_alloc_node mm/slub.c:4041 [inline] kmem_cache_alloc_node_noprof+0x6bf/0xb80 mm/slub.c:4084 kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:583 __alloc_skb+0x363/0x7b0 net/core/skbuff.c:674 alloc_skb include/linux/skbuff.h:1320 [inline] nf_send_reset6+0x98d/0x15b0 net/ipv6/netfilter/nf_reject_ipv6.c:327 nft_reject_inet_eval+0x3c1/0x880 net/netfilter/nft_reject_inet.c:48 expr_call_ops_eval net/netfilter/nf_tables_core.c:240 [inline] nft_do_chain+0x438/0x22a0 net/netfilter/nf_tables_core.c:288 nft_do_chain_inet+0x41a/0x4f0 net/netfilter/nft_chain_filter.c:161 nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline] nf_hook_slow+0xf4/0x400 net/netfilter/core.c:626 nf_hook include/linux/netfilter.h:269 [inline] NF_HOOK include/linux/netfilter.h:312 [inline] ipv6_rcv+0x29b/0x390 net/ipv6/ip6_input.c:310 __netif_receive_skb_one_core net/core/dev.c:5661 [inline] __netif_receive_skb+0x1da/0xa00 net/core/dev.c:5775 process_backlog+0x4ad/0xa50 net/core/dev.c:6108 __napi_poll+0xe7/0x980 net/core/dev.c:6772 napi_poll net/core/dev.c:6841 [inline] net_rx_action+0xa5a/0x19b0 net/core/dev.c:6963 handle_softirqs+0x1ce/0x800 kernel/softirq.c:554 __do_softirq+0x14/0x1a kernel/softirq.c:588 Fixes: c8d7b98b ("netfilter: move nf_send_resetX() code to nf_reject_ipvX modules") Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Reviewed-by:
Pablo Neira Ayuso <pablo@netfilter.org> Link: https://patch.msgid.link/20240913170615.3670897-1-edumazet@google.comSigned-off-by:
-
Sean Anderson authored
axienet_free_tx_chain returns the number of DMA descriptors it's handled. However, axienet_tx_poll treats the return as the number of packets. When scatter-gather SKBs are enabled, a single packet may use multiple DMA descriptors, which causes incorrect packet counts. Fix this by explicitly keepting track of the number of packets processed as separate from the DMA descriptors. Budget does not affect the number of Tx completions we can process for NAPI, so we use the ring size as the limit instead of budget. As we no longer return the number of descriptors processed to axienet_tx_poll, we now update tx_bd_ci in axienet_free_tx_chain. Fixes: 8a3b7a25 ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver") Signed-off-by:
Sean Anderson <sean.anderson@linux.dev> Link: https://patch.msgid.link/20240913145156.2283067-1-sean.anderson@linux.devSigned-off-by:
-
Sean Anderson authored
As advised by Documentation/networking/napi.rst, masking IRQs after calling napi_schedule can be racy. Avoid this by only masking/scheduling if napi_schedule_prep returns true. Fixes: 9e2bc267 ("net: axienet: Use NAPI for TX completion path") Fixes: cc37610c ("net: axienet: implement NAPI and GRO receive") Signed-off-by:
Shannon Nelson <shannon.nelson@amd.com> Reviewed-by:
-
Vladimir Oltean authored
The author of the blamed commit apparently did not notice something about aqr_wait_reset_complete(): it polls the exact same register - MDIO_MMD_VEND1:VEND1_GLOBAL_FW_ID - as aqr_firmware_load(). Thus, the entire logic after the introduction of aqr_wait_reset_complete() is now completely side-stepped, because if aqr_wait_reset_complete() succeeds, MDIO_MMD_VEND1:VEND1_GLOBAL_FW_ID could have only been a non-zero value. The handling of the case where the register reads as 0 is dead code, due to the previous -ETIMEDOUT having stopped execution and returning a fatal error to the caller. We never attempt to load new firmware if no firmware is present. Based on static code analysis, I guess we should simply introduce a switch/case statement based on the return code from aqr_wait_reset_complete(), to determine whether to load firmware or not. I am not intending to change the procedure through which the driver determines whether to load firmware or not, as I am unaware of alternative possibilities. At the same time, Russell King suggests that if aqr_wait_reset_complete() is expected to return -ETIMEDOUT as part of normal operation and not just catastrophic failure, the use of phy_read_mmd_poll_timeout() is improper, since that has an embedded print inside. Just open-code a call to read_poll_timeout() to avoid printing -ETIMEDOUT, but continue printing actual read errors from the MDIO bus. Fixes: ad649a1f ("net: phy: aquantia: wait for FW reset before checking the vendor ID") Reported-by:
Clark Wang <xiaoning.wang@nxp.com> Reported-by:
Jon Hunter <jonathanh@nvidia.com> Closes: https://lore.kernel.org/netdev/8ac00a45-ac61-41b4-9f74-d18157b8b6bf@nvidia.com/Reported-by:
Hans-Frieder Vogt <hfdevel@gmx.net> Closes: https://lore.kernel.org/netdev/c7c1a3ae-be97-4929-8d89-04c8aa870209@gmx.net/Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by:
Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Tested-by:
-
- 16 Sep, 2024 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextLinus Torvalds authored
Pull networking updates from Jakub Kicinski: "The zero-copy changes are relatively significant, but regression risk should be contained. The feature needs to be used to cause trouble. Also it feels like we got an order of magnitude more semi-automated "refactoring" chaff than usual, I wonder if it's just us. Core & protocols: - Support Device Memory TCP, ability to zero-copy receive TCP payloads to a DMABUF region of memory while packet headers land separately in normal kernel buffers, and TCP processes then as usual. - The ability to read the PTP PHC (Physical Hardware Clock) alongside MONOTONIC_RAW timestamps with PTP_SYS_OFFSET_EXTENDED. Previously only CLOCK_REALTIME was supported. - Allow matching on all bits of IP DSCP for routing decisions. Previously we only supported on matching TOS bits in IPv4 which is a narrower interpretation of the same header field. - Increase the range of weights used for multi-path routing from 8 bits to 16 bits. - Add support for IPv6 PIO p flag in the Prefix Information Option per draft-ietf-6man-pio-pflag. - IPv6 IOAM6 support for new tunsrc encap mode for better performance. - Detect destinations which blackhole MPTCP traffic and avoid initiating MPTCP connections to them for a certain period of time, 1h by default. - Improve IPsec control path performance by removing the inexact policies list. - AF_VSOCK: add support for SIOCOUTQ ioctl. - Add enum for reasons TCP reset was sent for easier tracing. - Add SMC ringbufs usage statistics. Drivers: - Handle netconsole setup failures more gracefully, don't fail loading, retain the specified target as disabled. - Extend bonding's IPsec offload pass thru capabilities (ESN, stats). Filtering: - Add TCP_BPF_SOCK_OPS_CB_FLAGS to bpf_*sockopt() to address the case when long-lived sockets miss a chance to set additional callbacks if a sockops program was not attached early in their lifetime. - Support using BPF skb helpers in tracepoints. - Conntrack Netlink: support CTA_FILTER for flush. - Improve SCTP support in nfnetlink_queue. - Improve performance of large nftables flush transactions. Things we sprinkled into general kernel code: - selftests: support setting an "interpreter" for script files; make it easy to run as separate cases tests where one "interpreter" is fed various test descriptions (in our case packet sequences). Driver API: - Extend core and ethtool APIs to support many PHYs connected to a single interface (PHY topologies). - Extend cable diagnostics to specify whether Time Domain Reflectometry (TDR) or Active Link Cable Diagnostic (ALCD) was used. - Add library for implementing MAC-PHY Ethernet drivers for SPI devices compatible with Open Alliance 10BASE-T1x MAC-PHY Serial Interface (TC6) standard. - Add helpers to the PHY framework, for PHYs following the Open Alliance standards: - 1000BaseT1 link settings - cable test and diagnostics - Support listing / dumping all allocated RSS contexts. - Add configuration for frequency Embedded SYNC in DPLL, which magically embeds sync pulses into Ethernet signaling. Device drivers: - Ethernet high-speed NICs: - Broadcom (bnxt): - use better FW APIs for queue reset - support QOS and TPID settings for the SR-IOV VLAN - support dynamic MSI-X allocation - Intel (100G, ice, idpf): - ice: support PCIe subfunctions - iavf: add support for TC U32 filters on VFs - ice: support Embedded SYNC in DPLL - nVidia/Mellanox (mlx5): - support HW managed steering tables - support PCIe PTM cross timestamping - AMD/Pensando: - ionic: use page_pool to increase Rx performance - Cisco (enic): - report per-queue statistics - Ethernet virtual: - Microsoft vNIC: - mana: support configuring ring length - netvsc: enable more channels on systems with many CPUs - IBM veth: - optimize polling to improve TCP_RR performance - optimize performance of Tx handling - VirtIO net: - synchronize the operstate with the admin state to allow a lower virtio-net to propagate the link status to an upper device like macvlan - Ethernet NICs consumer, and embedded: - Add driver for Realtek automotive PCIe devices (RTL9054, RTL9068, RTL9072, RTL9075, RTL9068, RTL9071) - Add driver for Microchip LAN8650/1 10BASE-T1S MAC-PHY. - Microchip: - lan743x: use phylink - support WOL, EEE, pause, link settings - add Wake-on-LAN support for KSZ87xx family - add KSZ8895/KSZ8864 switch support - factor out FDMA code and use it in sparx5 and lan966x (including DCB support in both) - Synopsys (stmmac): - support frame preemption (configured using TC and ethtool) - support Loongson DWMAC (GMAC v3.73) - support RockChips RK3576 DWMAC - TI: - am65-cpsw: add multi queue RX support - icssg-prueth: HSR offload support - Cadence (macb): - enable software (hrtimer based) IRQ coalescing by default - Xilinx (axinet): - expose HW statistics - improve multicast filtering - relax Rx checksum offload constraints - MediaTek: - mt7530: add EN7581 support - Aspeed (ftgmac100): - report link speed and duplex - Intel: - igc: add mqprio offload - igc: report EEE configuration - RealTek (r8169): - add support for RTL8126A rev.b - Vitesse (vsc73xx): - implement FDB add/del/dump operations - Freescale (fs_enet): - use phylink - Ethernet PHYs: - vitesse: implement downshift and MDI-X in vsc73xx PHYs - microchip: support LAN887x, supporting IEEE 802.3bw (100BASE-T1) and IEEE 802.3bp (1000BASE-T1) specifications - add Applied Micro QT2025 PHY driver (in Rust) - add Motorcomm yt8821 2.5G Ethernet PHY driver - CAN: - add driver for Rockchip RK3568 CAN-FD controller - flexcan: add wakeup support for imx95 - kvaser_usb: set hardware timestamp on transmitted packets - WiFi: - mac80211/cfg80211: - EHT rate support in AQL airtime fairness - handle DFS (radar detection) per link in Multi-Link Operation - RealTek (rtw89): - support RTL8852BT and 8852BE-VT (WiFi 6) - support hardware rfkill - support HW encryption in unicast management frames - support Wake-on-WLAN with supported network detection - RealTek (rtw89): - improve Rx performance by using USB frame aggregation - support USB 3 with RTL8822CU/RTL8822BU - Intel (iwlwifi/mvm): - offload RLC/SMPS functionality to firmware - Marvell (mwifiex): - add host based MLME to enable WPA3 - Bluetooth: - add support for Amlogic HCI UART protocol - add support for ISO data/packets to Intel and NXP drivers" * tag 'net-next-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1303 commits) net/mlx5: HWS, check the correct variable in hws_send_ring_alloc_sq() netfilter: nft_socket: Fix a NULL vs IS_ERR() bug in nft_socket_cgroup_subtree_level() ice: Fix a NULL vs IS_ERR() check in probe() ice: Fix a couple NULL vs IS_ERR() bugs net: ethernet: fs_enet: Make the per clock optional net: ti: icssg-prueth: Add multicast filtering support in HSR mode net: ti: icssg-prueth: Enable HSR Tx duplication, Tx Tag and Rx Tag offload net: ti: icssg-prueth: Add support for HSR frame forward offload net: ti: icssg-prueth: Stop hardcoding def_inc net: ti: icss-iep: Move icss_iep structure net: ibm: emac: get rid of wol_irq net: ibm: emac: remove all waiting code net: ibm: emac: replace of_get_property net: ibm: emac: use netdev's phydev directly net: ibm: emac: use devm for register_netdev net: ibm: emac: remove mii_bus with devm net: ibm: emac: use devm for of_iomap net: ibm: emac: manage emac_irq with devm net: ibm: emac: use devm for alloc_etherdev octeontx2-af: debugfs: Add Channel info to RPM map ...
-
- 15 Sep, 2024 9 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski authored
Merge in late fixes to prepare for the 6.12 net-next PR. No conflicts or adjacent changes. Signed-off-by:Jakub Kicinski <kuba@kernel.org>
-
Dan Carpenter authored
There is a copy and paste bug so this code checks "sq->dep_wqe" where "sq->wr_priv" was intended. It could result in a NULL pointer dereference. Fixes: 2ca62599 ("net/mlx5: HWS, added send engine and context handling") Signed-off-by:
Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by:
-
Dan Carpenter authored
The cgroup_get_from_path() function never returns NULL, it returns error pointers. Update the error handling to match. Fixes: 7f3287db ("netfilter: nft_socket: make cgroupsv2 matching work with namespaces") Signed-off-by:
Florian Westphal <fw@strlen.de> Acked-by:
-
Dan Carpenter authored
The ice_allocate_sf() function returns error pointers on error. It doesn't return NULL. Update the check to match. Fixes: 177ef7f1 ("ice: base subfunction aux driver") Signed-off-by:
-
Dan Carpenter authored
The ice_repr_create() function returns error pointers. It never returns NULL. Fix the callers to check for IS_ERR(). Fixes: 977514fb ("ice: create port representor for SF") Fixes: 415db839 ("ice: make representor code generic") Signed-off-by:
-
Maxime Chevallier authored
Some platforms that use fs_enet don't have the PER register clock. This optional dependency on the clock was incorrectly made mandatory when switching to devm_ accessors. Reported-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Closes: https://lore.kernel.org/netdev/4e4defa9-ef2f-4ff1-95ca-6627c24db20c@wanadoo.fr/ Fixes: c614acf6 ("net: ethernet: fs_enet: simplify clock handling with devm accessors") Signed-off-by:
Maxime Chevallier <maxime.chevallier@bootlin.com> Reviewed-by:
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull kvm fix from Paolo Bonzini: "Do not always honor guest PAT on CPUs that support self-snoop. This triggers an issue in the bochsdrm driver, which used ioremap() instead of ioremap_wc() to map the video RAM. The revert lets video RAM use the WB memory type instead of the slower UC memory type" * tag 'for-linus-6.11' of git://git.kernel.org/pub/scm/virt/kvm/kvm: Revert "KVM: VMX: Always honor guest PAT on CPUs that support self-snoop"
-
Paolo Bonzini authored
This reverts commit 377b2f35. This caused a regression with the bochsdrm driver, which used ioremap() instead of ioremap_wc() to map the video RAM. After the commit, the WB memory type is used without the IGNORE_PAT, resulting in the slower UC memory type. In fact, UC is slow enough to basically cause guests to not boot... but only on new processors such as Sapphire Rapids and Cascade Lake. Coffee Lake for example works properly, though that might also be an effect of being on a larger, more NUMA system. The driver has been fixed but that does not help older guests. Until we figure out whether Cascade Lake and newer processors are working as intended, revert the commit. Long term we might add a quirk, but the details depend on whether the processors are working as intended: for example if they are, the quirk might reference bochs-compatible devices, e.g. in the name and documentation, so that userspace can disable the quirk by default and only leave it enabled if such a device is being exposed to the guest. If instead this is actually a bug in CLX+, then the actions we need to take are different and depend on the actual cause of the bug. Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
- 14 Sep, 2024 8 commits
-
-
Jakub Kicinski authored
MD Danish Anwar says: ==================== Introduce HSR offload support for ICSSG This series introduces HSR offload support for ICSSG driver. To support HSR offload to hardware, ICSSG HSR firmware is used. This series introduces, 1. HSR frame offload support for ICSSG driver. 2. HSR Tx Packet duplication offload 3. HSR Tx Tag and Rx Tag offload 4. Multicast filtering support in HSR offload mode. 5. Dependencies related to IEP. HSR Test Setup: -------------- ___________ ___________ ___________ | | Link AB | | Link BC | | __| AM64* |_________| AM64 |_________| AM64* |___ | | Station A | | Station B | | Station C | | | |___________| |___________| |___________| | | | |______________________________________________________________| Link CA *Could be any device that supports two ethernet interfaces. Steps to switch to HSR frame forward offload mode: ------------------------------------------------- Example assuming eth1, eth2 ports of ICSSG1 on AM64-EVM 1) Enable HSR offload for both interfaces ethtool -K eth1 hsr-fwd-offload on ethtool -K eth1 hsr-dup-offload on ethtool -K eth1 hsr-tag-ins-offload on ethtool -K eth1 hsr-tag-rm-offload on ethtool -K eth2 hsr-fwd-offload on ethtool -K eth2 hsr-dup-offload on ethtool -K eth2 hsr-tag-ins-offload on ethtool -K eth2 hsr-tag-rm-offload on 2) Create HSR interface and add slave interfaces to it ip link add name hsr0 type hsr slave1 eth1 slave2 eth2 \ supervision 45 version 1 3) Add IP address to the HSR interface ip addr add <IP_ADDR>/24 dev hsr0 4) Bring up the HSR interface ip link set hsr0 up Switching back to previous mode: -------------------------------- 1) Delete HSR interface ip link delete hsr0 2) Disable HSR port-to-port offloading mode, packet duplication ethtool -K eth1 hsr-fwd-offload off ethtool -K eth1 hsr-dup-offload off ethtool -K eth1 hsr-tag-ins-offload off ethtool -K eth1 hsr-tag-rm-offload off ethtool -K eth2 hsr-fwd-offload off ethtool -K eth2 hsr-dup-offload off ethtool -K eth2 hsr-tag-ins-offload off ethtool -K eth2 hsr-tag-rm-offload off Testing the port-to-port frame forward offload feature: ----------------------------------------------------- 1) Connect the LAN cables as shown in the test setup. 2) Configure Station A and Station C in HSR non-offload mode. 3) Configure Station B is HSR offload mode. 4) Since HSR is a redundancy protocol, disconnect cable "Link CA", to ensure frames from Station A reach Station C only through Station B. 5) Run iperf3 Server on Station C and client on station A. 7) Check the CPU usage on Station B. CPU usage report on Station B using mpstat when running UDP iperf3: ------------------------------------------------------------------- 1) Non-Offload case ------------------- CPU %usr %nice %sys %iowait %irq %soft %steal %guest %idle all 0.00 0.00 0.50 0.00 3.52 29.15 0.00 0.00 66.83 0 0.00 0.00 0.00 0.00 7.00 58.00 0.00 0.00 35.00 1 0.00 0.00 0.99 0.00 0.99 0.00 0.00 0.00 98.02 2) Offload case --------------- CPU %usr %nice %sys %iowait %irq %soft %steal %guest %idle all 0.00 0.00 0.00 0.00 0.50 0.00 0.00 0.00 99.50 0 0.00 0.00 0.99 0.00 0.00 0.00 0.00 0.00 99.01 1 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 100.00 Note: 1) At the very least, hsr-fwd-offload must be enabled. Without offloading the port-to-port offload, other HSR offloads cannot be enabled. 2) hsr-tag-ins-offload and hsr-dup-offload are tightly coupled in the firmware implementation. They both need to be enabled / disabled together. v1: https://lore.kernel.org/20240808110800.1281716-1-danishanwar@ti.com/ v2: https://lore.kernel.org/20240813074233.2473876-1-danishanwar@ti.com v3: https://lore.kernel.org/20240828091901.3120935-1-danishanwar@ti.com/ v4: https://lore.kernel.org/20240904100506.3665892-1-danishanwar@ti.com/ v5: https://lore.kernel.org/20240906111538.1259418-1-danishanwar@ti.com/ [0] https://lore.kernel.org/202409061658.vSwcFJiK-lkp@intel.com/ [1] https://lore.kernel.org/20240828091901.3120935-5-danishanwar@ti.com/ [2] https://lore.kernel.org/20240828091901.3120935-7-danishanwar@ti.com/ [3] https://lore.kernel.org/20240813074233.2473876-2-danishanwar@ti.com/ [4] https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net.git/commit/?id=e846be0fba85 ==================== Link: https://patch.msgid.link/20240911081603.2521729-1-danishanwar@ti.comSigned-off-by: -
MD Danish Anwar authored
Add support for multicast filtering in HSR mode Reviewed-by:
Roger Quadros <rogerq@kernel.org> Signed-off-by:
MD Danish Anwar <danishanwar@ti.com> Link: https://patch.msgid.link/20240911081603.2521729-6-danishanwar@ti.comSigned-off-by:
-
Ravi Gunasekaran authored
The HSR stack allows to offload its Tx packet duplication functionality to the hardware. Enable this offloading feature for ICSSG driver. Add support to offload HSR Tx Tag Insertion and Rx Tag Removal and duplicate discard. hsr tag insertion offload and hsr dup offload are tightly coupled in firmware implementation. Both these features need to be enabled / disabled together. Duplicate discard is done as part of RX tag removal and it is done by the firmware. When driver sends the r30 command ICSSG_EMAC_HSR_RX_OFFLOAD_ENABLE, firmware does RX tag removal as well as duplicate discard. Signed-off-by:
Ravi Gunasekaran <r-gunasekaran@ti.com> Signed-off-by:
-
MD Danish Anwar authored
Add support for offloading HSR port-to-port frame forward to hardware. When the slave interfaces are added to the HSR interface, the PRU cores will be stopped and ICSSG HSR firmwares will be loaded to them. Similarly, when HSR interface is deleted, the PRU cores will be restarted and the last used firmwares will be reloaded. PRUeth interfaces will be back to the last used mode. This commit also renames some APIs that are common between switch and hsr mode with '_fw_offload' suffix. Signed-off-by:
-
MD Danish Anwar authored
The def_inc is stored in icss_iep structure. Currently default increment (ns per clock tick) is hardcoded to 4 (Clock frequency being 250 MHz). Change this to use the iep->def_inc variable as the iep structure is now accessible to the driver files. Reviewed-by:
-
MD Danish Anwar authored
Move icss_iep structure definition and to icss_iep.h file so that the structure members can be used / accessed by all icssg driver files. Reviewed-by:
Jacob Keller <jacob.e.keller@intel.com> Reviewed-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlLinus Torvalds authored
Pull pin control fixes from Linus Walleij: - One Intel patch that I mistakenly merged into for-next despite it belonging in fixes: add Arrow Lake-H/U ACPI ID so this Arrow Lake chip probes. - One fix making the CY895x0 reg cache work, which is good because it makes the device work too. * tag 'pinctrl-v6.11-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: pinctrl-cy8c95x0: Fix regcache pinctrl: meteorlake: Add Arrow Lake-H/U ACPI ID
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "A few last-minute ASoC fixes and MAINTAINERS update. All look small, obvious and nice-to-have fixes for 6.11-final" * tag 'sound-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ASoC: meson: axg-card: fix 'use-after-free' ASoC: codecs: avoid possible garbage value in peb2466_reg_read() MAINTAINERS: update Pierre Bossart's email and role ASoC: tas2781: fix to save the dsp bin file name into the correct array in case name_prefix is not NULL ASoC: Intel: soc-acpi-intel-mtl-match: add missing empty item ASoC: Intel: soc-acpi-intel-lnl-match: add missing empty item
-
