- 16 Aug, 2022 40 commits
-
-
Victor Zhao authored
For some hang caused by slow tests, engine cannot be stopped which may cause resume failure after reset. In this case, force halt engine by reverting context addresses Signed-off-by:
Victor Zhao <Victor.Zhao@amd.com> Acked-by:
Andrey Grodzovsky <andrey.grodzovsky@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Victor Zhao authored
Save and restore gfxhub regs as they will be reset during mode 2 Signed-off-by:
-
Victor Zhao authored
Introduce amdgpu_reset_level debugfs in order to help debug and test specific type of reset. Also helps blocking unwanted type of resets. By default, mode2 reset will not be enabled v2: make this debugfs in adev and use debugfs_create_u32 Signed-off-by:
-
Victor Zhao authored
- introduce AMDGPU_SKIP_MODE2_RESET flag - let mode2 reset fallback to default reset method if failed v2: move this part out from the asic specific part Signed-off-by:
-
Victor Zhao authored
To meet the requirement for multi container usecase which needs a quicker reset and not causing VRAM lost, adding the Mode2 reset handler for sienna_cichlid. v2: move skip mode2 flag part separately v3: remove the use of asic_reset_res Signed-off-by:
-
Michel Dänzer authored
This reverts commit 4c763180. Triggered GFX hangs with GNOME Wayland on Navi 21. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2117Signed-off-by:
Michel Dänzer <mdaenzer@redhat.com> Signed-off-by:
-
Maíra Canal authored
If amdgpu_cs_vm_handling returns r != 0, then it will unlock the bo_list_mutex inside the function amdgpu_cs_vm_handling and again on amdgpu_cs_parser_fini. This problem results in the following use-after-free problem: [ 220.280990] ------------[ cut here ]------------ [ 220.281000] refcount_t: underflow; use-after-free. [ 220.281019] WARNING: CPU: 1 PID: 3746 at lib/refcount.c:28 refcount_warn_saturate+0xba/0x110 [ 220.281029] ------------[ cut here ]------------ [ 220.281415] CPU: 1 PID: 3746 Comm: chrome:cs0 Tainted: G W L ------- --- 5.20.0-0.rc0.20220812git7ebfc85e.10.fc38.x86_64 #1 [ 220.281421] Hardware name: System manufacturer System Product Name/ROG STRIX X570-I GAMING, BIOS 4403 04/27/2022 [ 220.281426] RIP: 0010:refcount_warn_saturate+0xba/0x110 [ 220.281431] Code: 01 01 e8 79 4a 6f 00 0f 0b e9 42 47 a5 00 80 3d de 7e be 01 00 75 85 48 c7 c7 f8 98 8e 98 c6 05 ce 7e be 01 01 e8 56 4a 6f 00 <0f> 0b e9 1f 47 a5 00 80 3d b9 7e be 01 00 0f 85 5e ff ff ff 48 c7 [ 220.281437] RSP: 0018:ffffb4b0d18d7a80 EFLAGS: 00010282 [ 220.281443] RAX: 0000000000000026 RBX: 0000000000000003 RCX: 0000000000000000 [ 220.281448] RDX: 0000000000000001 RSI: ffffffff988d06dc RDI: 00000000ffffffff [ 220.281452] RBP: 00000000ffffffff R08: 0000000000000000 R09: ffffb4b0d18d7930 [ 220.281457] R10: 0000000000000003 R11: ffffa0672e2fffe8 R12: ffffa058ca360400 [ 220.281461] R13: ffffa05846c50a18 R14: 00000000fffffe00 R15: 0000000000000003 [ 220.281465] FS: 00007f82683e06c0(0000) GS:ffffa066e2e00000(0000) knlGS:0000000000000000 [ 220.281470] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 220.281475] CR2: 00003590005cc000 CR3: 00000001fca46000 CR4: 0000000000350ee0 [ 220.281480] Call Trace: [ 220.281485] <TASK> [ 220.281490] amdgpu_cs_ioctl+0x4e2/0x2070 [amdgpu] [ 220.281806] ? amdgpu_cs_find_mapping+0xe0/0xe0 [amdgpu] [ 220.282028] drm_ioctl_kernel+0xa4/0x150 [ 220.282043] drm_ioctl+0x21f/0x420 [ 220.282053] ? amdgpu_cs_find_mapping+0xe0/0xe0 [amdgpu] [ 220.282275] ? lock_release+0x14f/0x460 [ 220.282282] ? _raw_spin_unlock_irqrestore+0x30/0x60 [ 220.282290] ? _raw_spin_unlock_irqrestore+0x30/0x60 [ 220.282297] ? lockdep_hardirqs_on+0x7d/0x100 [ 220.282305] ? _raw_spin_unlock_irqrestore+0x40/0x60 [ 220.282317] amdgpu_drm_ioctl+0x4a/0x80 [amdgpu] [ 220.282534] __x64_sys_ioctl+0x90/0xd0 [ 220.282545] do_syscall_64+0x5b/0x80 [ 220.282551] ? futex_wake+0x6c/0x150 [ 220.282568] ? lock_is_held_type+0xe8/0x140 [ 220.282580] ? do_syscall_64+0x67/0x80 [ 220.282585] ? lockdep_hardirqs_on+0x7d/0x100 [ 220.282592] ? do_syscall_64+0x67/0x80 [ 220.282597] ? do_syscall_64+0x67/0x80 [ 220.282602] ? lockdep_hardirqs_on+0x7d/0x100 [ 220.282609] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 220.282616] RIP: 0033:0x7f8282a4f8bf [ 220.282639] Code: 00 48 89 44 24 18 31 c0 48 8d 44 24 60 c7 04 24 10 00 00 00 48 89 44 24 08 48 8d 44 24 20 48 89 44 24 10 b8 10 00 00 00 0f 05 <89> c2 3d 00 f0 ff ff 77 18 48 8b 44 24 18 64 48 2b 04 25 28 00 00 [ 220.282644] RSP: 002b:00007f82683df410 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [ 220.282651] RAX: ffffffffffffffda RBX: 00007f82683df588 RCX: 00007f8282a4f8bf [ 220.282655] RDX: 00007f82683df4d0 RSI: 00000000c0186444 RDI: 0000000000000018 [ 220.282659] RBP: 00007f82683df4d0 R08: 00007f82683df5e0 R09: 00007f82683df4b0 [ 220.282663] R10: 00001d04000a0600 R11: 0000000000000246 R12: 00000000c0186444 [ 220.282667] R13: 0000000000000018 R14: 00007f82683df588 R15: 0000000000000003 [ 220.282689] </TASK> [ 220.282693] irq event stamp: 6232311 [ 220.282697] hardirqs last enabled at (6232319): [<ffffffff9718cd7e>] __up_console_sem+0x5e/0x70 [ 220.282704] hardirqs last disabled at (6232326): [<ffffffff9718cd63>] __up_console_sem+0x43/0x70 [ 220.282709] softirqs last enabled at (6232072): [<ffffffff970ff669>] __irq_exit_rcu+0xf9/0x170 [ 220.282716] softirqs last disabled at (6232061): [<ffffffff970ff669>] __irq_exit_rcu+0xf9/0x170 [ 220.282722] ---[ end trace 0000000000000000 ]--- Therefore, remove the mutex_unlock from the amdgpu_cs_vm_handling function, so that amdgpu_cs_submit and amdgpu_cs_parser_fini can handle the unlock. Fixes: 90af0ca0 ("drm/amdgpu: Protect the amdgpu_bo_list list with a mutex v2") Reported-by:
Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
Melissa Wen <mwen@igalia.com> Signed-off-by:
Maíra Canal <mairacanal@riseup.net> Signed-off-by:
-
Mukul Joshi authored
There are no backing hardware registers for ih_soft ring. As a result, don't try to access hardware registers for read and write pointers when processing interrupts on the IH soft ring. Signed-off-by:
Mukul Joshi <mukul.joshi@amd.com> Acked-by:
Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by:
-
Shane Xiao authored
Add secure display TA load for Renoir Signed-off-by:
Shane Xiao <shane.xiao@amd.com> Reviewed-by:
Aaron Liu <aaron.liu@amd.com> Signed-off-by:
-
Alvin Lee authored
[Description] For SubVP scaling cases, we must include the scaling info as part of the cmd. This is required when converting OTG line to HUBP line for the MALL_START_LINE programming. Reviewed-by:
Jun Lei <Jun.Lei@amd.com> Acked-by:
Brian Chang <Brian.Chang@amd.com> Signed-off-by:
Alvin Lee <Alvin.Lee2@amd.com> Tested-by:
Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by:
-
Khalid Masum authored
There is no point in returning an int here. It only returns 0 which the caller never uses. Therefore return void and remove the unnecessary assignment. Addresses-Coverity: 1504988 ("Unused value") Fixes: 8da1170a ("drm/amdgpu: add VCN4 ip block support") Reviewed-by:Ruijing Dong <ruijing.dong@amd.com> Suggested-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Khalid Masum <khalid.masum.92@gmail.com> Signed-off-by:
-
Andrey Strachuk authored
Local variable 'rq' is initialized by an address of field of drm_sched_job, so it does not make sense to compare 'rq' with NULL. Found by Linux Verification Center (linuxtesting.org) with SVACE. Reviewed-by:
Andrey Strachuk <strochuk@ispras.ru> Fixes: 7c6e68c7 ("drm/amdgpu: Avoid HW GPU reset for RAS.") Signed-off-by:
-
Harish Kasiviswanathan authored
Was missing. Add it. Signed-off-by:
Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Reviewed-by:
Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by:
-
Samson Tam authored
[Why & How] Add GC_11_0_3_A0 as a chip revision to the DCN32 family Reviewed-by:
Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by:
Samson Tam <samson.tam@amd.com> Tested-by:
-
Charlene Liu authored
[why] this is to ensure that driver will not reprogram hvm_prefetch_req again if it is done. Reviewed-by:
Martin Leung <Martin.Leung@amd.com> Acked-by:
Charlene Liu <Charlene.Liu@amd.com> Tested-by:
-
Alvin Lee authored
[Description] Use pitch when calculating size to cache in MALL Reviewed-by:
-
Alvin Lee authored
[Description] Don't set DSC bit for phantom pipes, not required since phantom pipe don't have any actual output Reviewed-by:
-
Nicholas Kazlauskas authored
[Why & How] Depending on how the clock table is constructed from PMFW we can run into issues where we don't think we have enough bandwidth available due to FCLK too low - eg. when the FCLK table contains invalid entries or a single entry. We should always pick up the maximum clocks for each state as a final state in this case to prevent validation from failing if the table is malformed. We should also contain sensible defaults in the case where values are invalid. Redfine the clock table structures by adding a 314 prefix to make debugging these issues easier by avoiding symbol name clashes. Overall this policy more closely aligns to how we did things for 315, but because of how the voltage rail is setup we should favor keeping DCFCLK low rather than DISPCLK or DPPCLK - so use the max for those in every entry. Reviewed-by:
Daniel Miess <daniel.miess@amd.com> Acked-by:
Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by:
-
Chaitanya Dhere authored
[Why] Recent backport from opensource broke the Nightly tool build that tests DC and DML for bugs and regressions. This was because the backport had a header inclusion that was not consistent with the AMD style of including headers was allowed to be merged back in DML code that caused tool compilation failures. [How] Modify the way in which the header file in included so that it is consistent with AMD style of including headers. This then automatically fixes the tool compilation process and also helps maintain the code quality and consistency. Reviewed-by:
Chaitanya Dhere <chaitanya.dhere@amd.com> Tested-by:
-
Tom Chung authored
[Why] Pipes for MPO primary and overlay will be power down and power up during plug/unplug external monitor while MPO video playback. But the pipes were the same after plug/unplug and should not need to be power down and power up or it will make page flip interrupt disabled and cause hang issue. [How] Add pipe split change condition that not only check the top pipe pointer but also check the index of top pipe if both top pipes are available. Reviewed-by:
Sun peng Li <Sunpeng.Li@amd.com> Acked-by:
Tom Chung <chiahsuan.chung@amd.com> Tested-by:
-
Daniel Miess authored
[Why] Need a way to retain default clock table to aid the investigation into why 8k@30 display not lighting up on dcn314 [How] Use flag to prevent execution of bw_params helper function and function for updating bw_bounding_box Reviewed-by:
-
Dusica Milinkovic authored
[Why] During multi-vf executing benchmark (Luxmark) observed kiq error timeout. It happenes because all of VFs do the tlb invalidation at the same time. Although each VF has the invalidate register set, from hardware side the invalidate requests are queue to execute. [How] In case of 12 VF increase timeout on 12*100ms Signed-off-by:
Dusica Milinkovic <Dusica.Milinkovic@amd.com> Acked-by:
Shaoyun Liu <shaoyun.liu@amd.com> Acked-by:
-
Josip Pavic authored
[Why & How] Increase width of some variables to avoid comparing integers of different widths. Reviewed-by:
Josip Pavic <Josip.Pavic@amd.com> Tested-by:
-
Ian Chen authored
Reviewed-by:
Anthony Koo <Anthony.Koo@amd.com> Acked-by:
Ian Chen <ian.chen@amd.com> Tested-by:
-
Ilya Bakoulin authored
[Why] Some pixel clock values could cause HDMI TMDS SSCPs to be misaligned between different HDMI lanes when using YCbCr420 10-bit pixel format. BIOS functions for transmitter/encoder control take pixel clock in kHz increments, whereas the function for setting the pixel clock is in 100Hz increments. Setting pixel clock to a value that is not on a kHz boundary will cause the issue. [How] Round pixel clock down to nearest kHz in 10/12-bpc cases. Reviewed-by:
Aric Cyr <Aric.Cyr@amd.com> Acked-by:
Ilya Bakoulin <Ilya.Bakoulin@amd.com> Tested-by:
-
Aric Cyr authored
This version brings along following fixes: -Fix edp panel missing event -Set ARGB16161616 pixel format to 26 -Fix dcn32 interger issue -Clear optc underflow bit after ODM clock off -Fix issue with stereo3D -Fix DML2 lightup issue -Correct DTBCLK for dcn314 -Revert for a regression -Fix clocks and bugs in DML2 -Enable SubVP by defalut on DCN32 & DCN321 -Corret boundary condition for engin ID on DCN303 -Fix FRL encoder override registry key -Fix VPG for dcn314 HPO -Fix Linux compile-time warning -Add new prefetch modes in DML for DCN32 Acked-by:
-
Ethan Wellenreiter authored
[WHY] Limiting vscsdp_for_colorimetry for YCbCr420/BT2020 resulted in red/green point failures in HDR10 DTN tests. The re-implementation of ARGB16161616 was to fix this however it did not actually fix this issue but a side effect of the issue. [HOW] Change ARGB16161616 pixel format to 26. Reviewed-by:
Ethan Wellenreiter <Ethan.Wellenreiter@amd.com> Tested-by:
-
Tim Huang authored
The driver needs to set EnableGfxImu message parameter to tell the PMFW to set the flag that enables the GFXOFF feature. Signed-off-by:
Tim Huang <tim.huang@amd.com> Reviewed-by:
-
Tim Huang authored
Enable AMD_CG_SUPPORT_IH_CG support. Signed-off-by:
-
Dan Carpenter authored
This code has two bugs. If kfd_topology_device_by_proximity_domain() failed on the first iteration through the loop then "cpu_link" is uninitialized and should not be dereferenced. The second bug is that we cannot dereference a list iterator when it points to the list head. In other words, if we exit the list_for_each_entry() loop exits without hitting a break then "cpu_link" is not a valid pointer and should not be dereferenced. Fix both of these problems by setting "cpu_link" to NULL when it is invalid and non-NULL when it is valid. That makes it easier to test for valid vs invalid. Fixes: 0f28cca8 ("drm/amdkfd: Extend KFD device topology to surface peer-to-peer links") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Yifan Zhang authored
There is only one engine in sdma 6.0.1, the total number of reserved queues should be 2, reflect this number in bitmap as well. Signed-off-by:
Yifan Zhang <yifan1.zhang@amd.com> Reviewed-by:
-
Tim Huang authored
Enable AMD_CG_SUPPORT_ATHUB_MGCG and AMD_CG_SUPPORT_ATHUB_LS support. Signed-off-by:
-
Tim Huang authored
Enable AMD_CG_SUPPORT_HDP_MGCG and AMD_CG_SUPPORT_HDP_LS support. Signed-off-by:
-
Tim Huang authored
Enable AMD_CG_SUPPORT_MC_MGCG and AMD_CG_SUPPORT_MC_LS support. Signed-off-by:
-
Tim Huang authored
Add ATHUB IP v3.0.1 in athub_v3_0_set_clockgating. The regATHUB_MISC_CNTL has different offset for ATHUB IP v3.0.1, so need to add IP version checking to use the right REG offset. Signed-off-by:
-
Tim Huang authored
Add set/get_clockgating for HDP IP v5.2.1. Signed-off-by:
-
Tim Huang authored
Add set/get_clockgating for MMHUB IP v3.0.1. Signed-off-by:
-
Tim Huang authored
The pmfw has changed the driver interface version, so keep same with the fw. Signed-off-by:
-
Felix Kuehling authored
Use the mm reference from the fence. This allows removing the svm_bo->svms pointer, which was problematic because we cannot assume that the struct kfd_process containing the svms is still allocated without holding a refcount on the process. Use mmget_not_zero to ensure the mm is still valid, and drop the svm_bo reference if it isn't. Signed-off-by:
Philip Yang <Philip.Yang@amd.com> Signed-off-by:
-
Kenneth Feng authored
add mode1 support since it's missing on smu_v13_0_7 Signed-off-by:
Kenneth Feng <kenneth.feng@amd.com> Reviewed-by:
Yang Wang <kevinyang.wang@amd.com> Signed-off-by:
-
