- 28 Jun, 2024 5 commits
-
-
Jerome Brunet authored
Add support for 705.6kHz and 768kHz sample rates Signed-off-by:
Jerome Brunet <jbrunet@baylibre.com> Link: https://patch.msgid.link/20240628123256.2019224-1-jbrunet@baylibre.comSigned-off-by:
Mark Brown <broonie@kernel.org>
-
Shengjiu Wang authored
On i.MX8MP, there are 3 interrupts, the third interrupt is SPDIF wakeup interrupt from PHY Add ref: dai-common.yaml for #sound-dai-cells is needed and XCVR is a DAI device. Signed-off-by:
Shengjiu Wang <shengjiu.wang@nxp.com> Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://patch.msgid.link/1719481981-4069-2-git-send-email-shengjiu.wang@nxp.comSigned-off-by:
-
Chen Ni authored
clk_prepare_enable() may fail, so we should better check its return value and propagate it in the case of error. Fixes: 62a7fc32 ("ASoC: max98088: Add master clock handling") Signed-off-by:
Chen Ni <nichen@iscas.ac.cn> Link: https://patch.msgid.link/20240628080534.843815-1-nichen@iscas.ac.cnSigned-off-by:
-
Yang Li authored
./sound/soc/codecs/ak4619.c:757:2-3: Unneeded semicolon Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=9442Signed-off-by:
Yang Li <yang.lee@linux.alibaba.com> Link: https://patch.msgid.link/20240628052406.36644-1-yang.lee@linux.alibaba.comSigned-off-by:
-
Jerome Brunet authored
The dummy DAI should allow any (reasonable) rates possible. Make the rate continuous for dummy and set range from 5512Hz to 768kHz The change is mostly cosmetic as dummy is skipped when setting the hwparams. Signed-off-by:
-
- 27 Jun, 2024 3 commits
-
-
Krzysztof Kozlowski authored
The Qualcomm LPASS WSA macro codec driver uses now parts of common module, so it has to select SND_SOC_LPASS_MACRO_COMMON. sound/soc/codecs/lpass-wsa-macro.o: in function `wsa_macro_probe': sound/soc/codecs/lpass-wsa-macro.c:2767:(.text+0x1c9c): undefined reference to `lpass_macro_get_codec_version' Reported-by:
kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202406272231.th1LtuLk-lkp@intel.com/ Fixes: 5dcf442b ("ASoC: codecs: lpass-wsa-macro: Prepare to accommodate new codec versions") Signed-off-by:
-
Mark Brown authored
Merge series from Shengjiu Wang <shengjiu.wang@nxp.com>: The transmitter and receiver part of the SAI interface need to be configured with different master/slave mode, especially to work with the audiomix module. The SAI1 TX is in master mode, but SAI1 RX is in slave mode. So add another two DAIs for TX and RX separately in fsl_sai driver. There will be three devices for audiomix sound card, hw:x,0 is the playback device for one SAI, hw:x,1 is the playback device for another SAI, hw:x,2 is the capture device for audmix output.
-
Mark Brown authored
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>: Introduce the ability for sound cards to manually order the startup of the various components in the card.
-
- 26 Jun, 2024 17 commits
-
-
Shuming Fan authored
The version B will support the multi-lane function and integrate the DMIC function in one SoundWire interface. Due to some registers having different default values between version A and B, this patch also removes the redundant default registers to avoid confusion. Signed-off-by:
Shuming Fan <shumingf@realtek.com> Link: https://patch.msgid.link/20240620103237.2124196-1-shumingf@realtek.comSigned-off-by:
-
Shuming Fan authored
This patch doesn't have any change of functionality. Signed-off-by:
-
Neil Armstrong authored
Like "audio-routing" drop the minItems: 2 from the "audio-widgets", because any limit here - lower or upper- is rather meaningless. This will also fix `dtbs_check` warnings like: sound: audio-widgets: ['Speaker', '7J4-14 LEFT', 'Speaker', '7J4-11 RIGHT'] is too long Signed-off-by:
Neil Armstrong <neil.armstrong@linaro.org> Acked-by:
Rob Herring (Arm) <robh@kernel.org> Link: https://patch.msgid.link/20240605-topic-amlogic-upstream-bindings-fixes-audio-widgets-v1-1-65bd7cc2e09b@linaro.orgSigned-off-by:
-
Aleksandr Mishin authored
If IORESOURCE_MEM "lpass-rxtx-cdc-dma-lpm" or "lpass-va-cdc-dma-lpm" resources is not provided in Device Tree due to any error, platform_get_resource_byname() will return NULL which is later dereferenced. According to sound/qcom,lpass-cpu.yaml, these resources are provided, but DT can be broken due to any error. In such cases driver must be able to protect itself, since the DT is external data for the driver. Adjust this issues by adding NULL return check. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: b1387062 ("ASoC: qcom: Add regmap config support for codec dma driver") Signed-off-by:
Aleksandr Mishin <amishin@t-argos.ru> Link: https://patch.msgid.link/20240605104953.12072-1-amishin@t-argos.ruSigned-off-by:
-
Shengjiu Wang authored
There will be three devices for this sound card, hw:x,0 is the playback device for one SAI, hw:x,1 is the playback device for another SAI, hw:x,2 is the capture device for audmix output. then capture device and playback device can be configured with different master/slave mode. Signed-off-by:
-
Shengjiu Wang authored
As audmix requires playback and capture stream in different master/slave mode, so separate playback and capture stream to different DAI. There are three DAIs required, two DAIs for playback one DAI for capture. Signed-off-by:
-
Shengjiu Wang authored
The transmitter and receiver part of the SAI interface need to be configured with different master/slave mode, especially to work with the audiomix module. +-------+ +-----------+ | SAI1 | --TX--> | | | | <--RX-- | | +-------+ | | | AUDIOMIX | +-------+ | | | SAI2 | --TX--> | | +-------+ +-----------+ The SAI1 TX is in master mode, but SAI1 RX is in slave mode. So add another two DAIs for TX and RX separately. but only defined fsl_sai_set_dai_fmt_tx() and fsl_sai_set_dai_fmt_rx() ops function for current case, in the future, the other ops function for TX and RX can be defined if required. Signed-off-by: -
Kuninori Morimoto authored
Some Sound Card might need special trigger ordering which is based on CPU/Codec connection. It is already supported on ASoC, but Audio Graph Card2 still not yet support it. Let's support it. Cc: Maxim Kochetkov <fido_max@inbox.ru> Signed-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://patch.msgid.link/87msnqzoj8.wl-kuninori.morimoto.gx@renesas.comSigned-off-by:
-
Kuninori Morimoto authored
Some Sound Card might need special trigger ordering which is based on CPU/Codec connection. It is already supported on ASoC, but Audio Graph Card still not yet support it. Let's support it. Cc: Maxim Kochetkov <fido_max@inbox.ru> Signed-off-by:
-
Kuninori Morimoto authored
Some Sound Card might need special trigger ordering which is based on CPU/Codec connection. It is already supported on ASoC, but Simple Audio Card still not yet support it. Let's support it. Cc: Maxim Kochetkov <fido_max@inbox.ru> Signed-off-by:
-
Kuninori Morimoto authored
Some Sound Card might need special trigger ordering which is based on CPU/Codec connection. It is already supported on ASoC, but Simple Audio Card / Audio Graph Card still not support it. Let's support it. Cc: Maxim Kochetkov <fido_max@inbox.ru> Signed-off-by:
-
Kuninori Morimoto authored
Sound Card need to consider/adjust HW control ordering based on the combination of CPU/Codec. The controlling feature is already supported on ASoC, but Simple Audio Card / Audio Graph Card still not support it. Let's support it. Cc: Maxim Kochetkov <fido_max@inbox.ru> Signed-off-by:
-
Krzysztof Kozlowski authored
Replace 'int' with proper 'enum lpass_codec_version' in every place which handles the parsed codec version (not raw register values!) to be explicit about contents of the variable. This makes code easier to read and compilers could check missing switch cases. Signed-off-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://patch.msgid.link/20240625165736.722106-2-krzysztof.kozlowski@linaro.orgSigned-off-by:
-
Krzysztof Kozlowski authored
Qualcomm LPASS macro codec driver parses registers in order to detect version of the codec. It recognizes codecs v2.0 - v2.8, however we know that there are earlier versions and 'enum lpass_codec_version' has also v1.0, v1.1 and v1.2. If by any chance we run on unrecognized version, driver will use random value from the stack as the codec version. Fix it by mapping such cases to an enum of value 0: LPASS_CODEC_VERSION_UNKNOWN. Fixes: 378918d5 ("ASoC: codecs: lpass-macro: add helpers to get codec version") Signed-off-by:
-
Krzysztof Kozlowski authored
Starting with v2.5 of Qualcomm LPASS Codec, few registers in the WSA macro block change. Bring proper support for this v2.5 and newer versions, to fix second speaker playback (speaker was silent). Signed-off-by:
-
Krzysztof Kozlowski authored
The driver for Qualcomm LPASS WSA macro codec was developed and tested on codec v2.1, however v2.5 has significant changes in the registers. The driver correctly works for v2.1 codec, but has issues when running on SoC with v2.5 codec (so starting with SM8450, even though playback works properly on that SoC). Prepare the driver for handling differences in register layouts of newer version. This does not have functional impact on older codec versions, but just: 1. Renames few soc_enums and widgets as v2.1, 2. For registers being different in v2.5, moves the defaults and regmap configuration to new structures, 3. Adds new 'struct wsa_reg_layout' with offsets and masks for few registers, so most of the code can stay unchaged on v2.5, 4. Chooses proper widgets, regmap config and register layout based on version of the codec. Signed-off-by:
-
Krzysztof Kozlowski authored
WSA_MACRO_MUX_INP_MASK2 define is not used. Signed-off-by:
-
- 25 Jun, 2024 6 commits
-
-
Shuming Fan authored
The SDCA spec defines a 'selected_mode' control which can override the 'detected_mode' reported by hardware. This is useful for platform integration as well as in cases where the hardware(e.g. 3.5mm jack cable) is not able to accurately detect the jack type. Signed-off-by:
-
Krzysztof Kozlowski authored
We have also v2.1 version of the codec (see 'enum lpass_codec_version'), so handle it as well in all switch cases. Fixes: dbacef05 ("ASoC: codec: lpass-rx-macro: prepare driver to accomdate new codec versions") Signed-off-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://patch.msgid.link/20240625160614.450506-1-krzysztof.kozlowski@linaro.orgReviewed-by:
-
Uwe Kleine-König authored
These drivers don't use the driver_data member of struct i2c_device_id, so don't explicitly initialize this member. This prepares putting driver_data in an anonymous union which requires either no initialization or named designators. But it's also a nice cleanup on its own. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@baylibre.com> Link: https://patch.msgid.link/20240624131728.1244053-2-u.kleine-koenig@baylibre.comSigned-off-by:
-
Lukas Bulwahn authored
Commit ae8fc294 ("ASoC: dt-bindings: add missing vender prefix on filename") renames a few files in Documentation/devicetree/bindings/sound/, but misses to adjust the file entries pointing to those files in MAINTAINERS. Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about broken references. Adjust the file entries in NXP SGTL5000 DRIVER and TEXAS INSTRUMENTS AUDIO (ASoC/HDA) DRIVERS. Signed-off-by:
Lukas Bulwahn <lukas.bulwahn@redhat.com> Acked-by:
-
Mark Brown authored
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>: Minor additions and cleanups this time.
-
Mark Brown authored
Merge series from Zhang Yi <zhangyi@everest-semi.com>: We propose four patches to solve headphone detection and suspend issues. And there are several registers that should be read-only registers. So we create es8326_writeable_register, and set these registers to false.
-
- 24 Jun, 2024 9 commits
-
-
Bard Liao authored
Cs42l43 bridge mode needs the two configurations. Signed-off-by:
Bard Liao <yung-chuan.liao@linux.intel.com> Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://patch.msgid.link/20240624121119.91552-5-pierre-louis.bossart@linux.intel.comSigned-off-by:
-
Pierre-Louis Bossart authored
Jack detection needs to rely on JD2, as most other Dell AlderLake-based devices. Closes: https://github.com/thesofproject/linux/issues/5021Signed-off-by:
Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by:
-
Brent Lu authored
Add a helper function max_98373_get_tx_mask() to get tx mask from max98373 ACPI device properties at runtime. Reviewed-by:
Brent Lu <brent.lu@intel.com> Signed-off-by:
-
Pierre-Louis Bossart authored
Experimental tests show that JD2_100K is required, otherwise the jack is detected always even with nothing plugged-in. To avoid matching with other known quirks the SKU information is used. Signed-off-by:
-
Shenghao Ding authored
ASoc: tas2781: Add name_prefix as the prefix name of firmwares and kcontrol to support corresponding TAS2563/TAS2781s Add name_prefix as the prefix name of firmwares and kcontrol to support corresponding TAS2563/TAS2781s. name_prefix is not mandatory. Signed-off-by:
Shenghao Ding <shenghao-ding@ti.com> Link: https://patch.msgid.link/20240621132309.564-1-shenghao-ding@ti.comSigned-off-by:
-
Peter Ujfalusi authored
It is incorrect to request the input pin format of the destination widget using the output pin index of the source module as the indexes are not necessarily matching. moduleA.out_pin1 can be connected to moduleB.in_pin0 for example. Use the dst_queue_id to request the input format of the destination module. This bug remained unnoticed likely because in nocodec topologies we don't have process modules after a module copier, thus the pin/queue index is ignored. For the process module case, the code was likely have been tested in a controlled way where all the pin/queue/format properties were present to work. Update the debug prints to have better information. Reviewed-by:
Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by:
-
Jiaxin Yu authored
There are two hardware connection methods for DMICs on the MT6358. In cases where more than two DMICs are used, we need to time-multiplex these DMICs. Therefore, we need to dynamically switch the modes of these DMICs based on the actual usage scenarios. ---- DMIC1 AU_VIN0 --- ---- DMIC2 AU_VIN2 --- ----DMIC3 When we want to use DMIC1/2, configure it to one-wire mode. When we want to use DMIC1/3, configure it to two-wire mode. Signed-off-by:Jiaxin Yu <jiaxin.yu@mediatek.com> Link: https://patch.msgid.link/20240613020725.27874-1-jiaxin.yu@mediatek.comSigned-off-by:
-
Zhang Yi authored
We modified the regmap_config members to fix cach sync error. There are several registers that should be read-only registers. If these registers are written while synchronizing the register values, the codec will enter an error state.So we create es8326_writeable_register, and set these registers to false Signed-off-by:
Zhang Yi <zhangyi@everest-semi.com> Link: https://patch.msgid.link/20240624030607.4307-5-zhangyi@everest-semi.comSigned-off-by:
-
Zhang Yi authored
Executing regcache_sync at initialization, we can hear a gentle pop noise. So we created es8326_init for initialization instead of executing es8326_resume Signed-off-by:
-
