We said we would wait until the 3.6 kernel release to remove these
drivers.  So we waited 6 months longer, that should be fine.

If anyone wants them back, it is trivial to revert these, but given that
I don't think they even build anymore, I doubt anyone will want them.

Cc: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

slic_card_locate does a kzalloc of physcard, and if it fails,
in my previous patch i returned -ENOMEM, but left the driver leak
the memory if card_hostid == SLIC_HOSTID_DEFAULT,

fix this memory leak if the above condition is true
Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This seems like a cut and paste bug.  Smatch complains that we don't
allocate enough memory for a set_stakey_rsp struct.  In fact this is
used as a set_assocsta_rsp struct throughout and that also matches the
name of the function.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

These comments are just extra cruft.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix the use of insn->chanspec with the CR_CHAN, CR_RANGE, and CR_AREF
macros. insn->chanspec is an unsigned int not an array.

Cleanup the comments when creating the 'val' to write to the channel
list fifo so that the code is a bit more readable.

Use the 'val' variable when getting the value from the ADC fifo and
then munging the data. This cleans up the goofy line breaks.

This function still does not follow the expectations of the comedi core.
It is supposed to read insn->n values from the channel and return those
values. Currently it only reads a single value.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This function only needs to update the output channel state when
the 'mask' (data[0]) indicates that the state is changing. It's
also supposed to return the state for all the input and output
channels in data[1].

This function appears to work correctly but it's coded quite
differently form the other comedi drivers. Rework the function so
it follows the normal form. Also, use a couple local variables
for the mmio addresses used to read/write the dio ports.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Currently this function does not work like the comedi code expects.

Fix the function so that it checks the instruction, data[0], and
does the correct action based on it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The boards supported by this driver either have analog outputs or don't
have them. Add a new boardinfo value, 'has_ao', to indicate this.

The boards that have analog outputs always have 4, 12-bit channels. Remove
the unnecessary boardinfo and just open-code the values in the subdevice
initialization.

The boards with analog outputs also share the same output range capabilities.
Rename the comedi_lrange to make it common for all board types.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

All the boards supported by this driver have the same analog input
specifications. Remove the unnecessary boardinfo and just open-code
the values in the subdevice initialization.

The boards also share the same analog input range capabilities. Remove
one of the duplicate tables and rename the other to make it common for
all board types.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Reformat the copyright and driver description comments to follow the
preferred block comment style. Reword the driver description to follow
comedi style described in the skel driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The analog input subdevice functions me_ai_do_cmd_test() and me_ai_do_cmd()
are only stubbed in. They both just return 0.

The me_ai_cancel() function does have code to stop any running conversions
but the me_ai_insn_read() function does that also.

Just remove the incomplete functions and remove SDF_CMD_READ from the
subdevice_flags.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This function is supposed to write to a single analog output channel.
The channel number is packed in insn->chanspec, which is an unsigned
int, and unpacked using the CR_CHAN() macro.

Currently this function is trying to use the chanspec as an array.
This works only if a single value is written.

Fix the function so that the desired channel is determined and all
the data is written to that channel.

Also, fix the return. The comedi core expects insn_read functions to
return the number of data values (insn->n).
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This function is supposed to return the analog output value for
a specified channel. The channel number is packed in insn->chanspec,
which is an unsigned int, and unpacked using the CR_CHAN() macro.

Currently this function is trying to use the chanspec as an array.
This works only if a single data value is read.

Fix the function so that the desired channel is determined and all
the data returned is from that channel.

Also, fix the return. The comedi core expects insn_read functions to
return the number of data values (insn->n).
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This driver uses the comedi auto config mechanism and does not
walk the pci bus to find the pci_dev. It should not be calling
pci_dev_put() to decrement the ref count.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

To improve the readability, add some whitespace to the subdevice
init.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix the whitespace.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rename the boardinfo variables so they are a bit more concise.

Remove the unnecessary comments in the boardinfo.

Add some whitespace to make the code more readable.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

All the boards supported by this driver have 32 dio channels.
Remove the boardinfo and just open code the value in the attach.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

These values can be determined from the {ao,ai}_resolution.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

These entries will default to '0' or 'NULL' as appropriate.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

One of the boards supported by this driver does not have analog
outputs. Fix the attach code to account for this.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Factor out the code in me_attach_pci() that handles the PLX-Bug
workaround to a separate function.

This looks odd. It appears that the bug workaround either swaps
PCI bars 0 and 5 or it modifies PCI bar 0. Shouldn't this happen
before PCI bar 0 is ioremap'ed?
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Instead of returning -EIO when comedi_pci_enable() fails, pass on
the actual error code. Also, remove the kernel noise when the
function fails.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Two local variables are used in me_attach_pci() to check for errors
when calling other functions, 'result' and 'error'. Remove both of
them and just use a common 'ret' variable.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI bar 2 is the main i/o address for this driver. Currently the
pci_resource_len of the bar is stored in the private data but
it is never used.

Remove 'me_regbase_size' from the private data. Also, remove the
local variables used for the pci_resource_start and _len. Just
pass the values directly to the ioremap().

Remove the kernel noise when the ioremap fails.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

As pointed out by Dan Carpenter, dev_private could be NULL when it
is checked before calling comedi_pci_disable(). The private data
variable 'plx_regbase_size' is only used to see if the pci device
has been enabled.

Remove that variable from the private data and just use the unused
dev->iobase variable to let the detach know that the pci device
is enabled.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

None of the callers check the return value. Just make it a void.

Flip the status check at the end of the function to check for an
error before outputing the dev_dbg(). Use __func__ for the function
name in the message.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There are a number of:

	} else {
		/* not supported */
	}

cases in this driver. Remove them.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove most of the dev_dbg() output from this driver. Most of it
is just noise.

For now I have left the dev_dbg() in the dt3k_send_cmd() function.
I still have not quite figured out how the low-level i/o works in
this driver...
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

To improve the readability, add some whitespace to the subdevice
init.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

When the board is finished with the attach output a simple dev_info()
message.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add some whitespace to make the code more readable.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

These entries will default to '0'.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Move some of the functions to remove the need for the forward
declarations.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The PCI device ids supported by this driver are used multiple
places in the code. To improve maintainability, create #define's
for them.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the BIP_RANGE() macro instead of the more generic RANGE()
macro.

Cleanup the whitespace.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Convert this driver to use the comedi PCI auto config mechanism
by adding an attach_pci callback.

Since this driver requires no extra configuration options, and
the attach callback is now optional, remove it.

Remove the kernel noise that is output when the attach fails
for various reasons.

Use the found 'dev->board_name' for the resource name passed to
comedi_pci_enable() and request_irq().

Pass on the error returned from request_irq() instead of returning
-EINVAL on error.

Since this driver no longer walks the pci bus to find the pci_dev,
remove the pci_dev_put() in the detach.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This macro relies on a local variable having a specific name.
Remove it and use the comedi_board() helper to get the pointer.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the module_comedi_driver() macro to make the code simpler
by eliminating module_init and module_exit calls.

dpatch engine is used to auto generate this patch.
(https://github.com/weiyj/dpatch)
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the module_comedi_driver() macro to make the code simpler
by eliminating module_init and module_exit calls.

dpatch engine is used to auto generate this patch.
(https://github.com/weiyj/dpatch)
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>