Add aspeed_mdio_op() and aseed_mdio_get_data() for register accessing.

aspeed_mdio_op() handles operations, write command to control register,
then check and wait operations is finished (bit 31 is cleared).

aseed_mdio_get_data() fetchs the result value of operation from data
register.
Signed-off-by: Potin Lai <potin.lai@quantatw.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

The driver for ATM Ambassador devices spews build warnings on
microblaze. The virt_to_bus() calls discard the volatile keyword.
The right thing to do would be to migrate this driver to a modern
DMA API but it seems unlikely anyone is actually using it.
There had been no fixes or functional changes here since
the git era begun.

In fact it sounds like the FW loading was broken from 2008
'til 2012 - see commit fcdc90b0 ("atm: forever loop loading
ambassador firmware").

Let's remove this driver, there isn't much changing in the APIs,
if users come forward we can apologize and revert.

Link: https://lore.kernel.org/all/20220321144013.440d7fc0@kicinski-fedora-pc1c0hjn.dhcp.thefacebook.com/Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Michael Chan says:

====================
bnxt: Support XDP multi buffer

This series adds XDP multi buffer support, allowing MTU to go beyond
the page size limit.

v4: Rebase with latest net-next
v3: Simplify page mode buffer size calculation
    Check to make sure XDP program supports multipage packets
v2: Fix uninitialized variable warnings in patch 1 and 10.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Allow aggregation buffers to be in place in the receive path and
allow XDP programs to be attached when using a larger than 4k MTU.

v3: Add a check to sure XDP program supports multipage packets.
Signed-off-by: Andy Gospodarek <gospo@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds the following features:
- Support for XDP_TX and XDP_DROP action when using xdp_buff
  with frags
- Support for freeing all frags attached to an xdp_buff
- Cleanup of TX ring buffers after transmits complete
- Slight change in definition of bnxt_sw_tx_bd since nr_frags
  and RX producer may both need to be used
- Clear out skb_shared_info at the end of the buffer

v2: Fix uninitialized variable warning in bnxt_xdp_buff_frags_free().
Signed-off-by: Andy Gospodarek <gospo@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since we have an xdp_buff with frags there needs to be a way to
convert that into a valid sk_buff in the event that XDP_PASS is
the resulting operation.  This adds a new rx_skb_func when the
netdev has an MTU that prevents the packets from sitting in a
single page.

This also make sure that GRO/LRO stay disabled even when using
the aggregation ring for large buffers.

v3: Use BNXT_PAGE_MODE_BUF_SIZE for build_skb
Signed-off-by: Andy Gospodarek <gospo@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If we are using aggregation rings with XDP enabled, allocate page
buffers for the aggregation rings from the page_pool.
Signed-off-by: Andy Gospodarek <gospo@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Modify ring header data split and jumbo parameters to account
for the fact that the design for XDP multibuffer puts close to
the first 4k of data in a page and the remaining portions of
the packet go in the aggregation ring.

v3: Simplified code around initial buffer size calculation
Signed-off-by: Andy Gospodarek <gospo@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Set the pfmemaloc flag in the xdp buff so that this can be
copied to the skb if needed for an XDP_PASS action.
Signed-off-by: Andy Gospodarek <gospo@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds a new function that will read pages from the
aggregation ring and create an xdp_buff with frags based on
the entries in the aggregation ring.
Signed-off-by: Andy Gospodarek <gospo@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Clarify that this is reading buffers from the aggregation ring.
Signed-off-by: Andy Gospodarek <gospo@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Rather than operating on an sk_buff, add frags from the aggregation
ring into the frags of an skb_shared_info.  This will allow the
caller to use either an sk_buff or xdp_buff.
Signed-off-by: Andy Gospodarek <gospo@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This will be used to determine if bnxt_rx_xdp should be called
rather than calling it every time.
Signed-off-by: Andy Gospodarek <gospo@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Move initialization of xdp_buff outside of bnxt_rx_xdp to prepare
for allowing bnxt_rx_xdp to operate on multibuffer xdp_buffs.

v2: Fix uninitalized variables warning in bnxt_xdp.c.
v3: Add new define BNXT_PAGE_MODE_BUF_SIZE
Signed-off-by: Andy Gospodarek <gospo@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jakub Kicinski says:

====================
tls: rx: random refactoring part 1

TLS Rx refactoring. Part 1 of 3. A couple of features to follow.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Instead of tls_device poking into internals of the message
return 1 from tls_device_decrypted() if the device handled
the decryption.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use early return and a jump label to remove two indentation levels.
No functional changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

We inform the applications that data is available when
the record is received. Decryption happens inline inside
recvmsg or splice call. Generating another wakeup inside
the decryption handler seems pointless as someone must
be actively reading the socket if we are executing this
code.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The padding length TLS 1.3 logic is searching for content_type from
the end of text. IMHO the code is easier to parse if we calculate
offset and decrement it rather than try to maintain positive offset
from the end of the record called "back".
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

TLS 1.3 has to strip padding, and it starts out 16 bytes
from the end of the record. Make it clear this is because
of the auth tag.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

We set the record type in tls_read_size(), can as well init
the tlm->decrypted field there.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Similar justification to previous change, the information
about decryption status belongs in the skb.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Original TLS implementation was handling one record at a time.
It stashed the type of the record inside tls context (per socket
structure) for convenience. When async crypto support was added
[1] the author had to use skb->cb to store the type per-message.

The use of skb->cb overlaps with strparser, however, so a hybrid
approach was taken where type is stored in context while parsing
(since we parse a message at a time) but once parsed its copied
to skb->cb.

Recently a workaround for sockmaps [2] exposed the previously
private struct _strp_msg and started a trend of adding user
fields directly in strparser's header. This is cleaner than
storing information about an skb in the context.

This change is not strictly necessary, but IMHO the ownership
of the context field is confusing. Information naturally
belongs to the skb.

[1] commit 94524d8f ("net/tls: Add support for async decryption of tls records")
[2] commit b2c46181 ("bpf, sockmap: sk_skb data_end access incorrect when src_reg = dst_reg")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pointless else branch after goto makes the code harder to refactor
down the line.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

'recv_end:' checks num_async and decrypted, and is then followed
by the 'end' label. Since we know that decrypted and num_async
are 0 at the start we can jump to 'end'.

Move the init of decrypted and num_async to let the compiler
catch if I'm wrong.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

No conflicts.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Pull networking fixes from Paolo Abeni:
 "Including fixes from bpf and netfilter.

  Current release - new code bugs:

   - mctp: correct mctp_i2c_header_create result

   - eth: fungible: fix reference to __udivdi3 on 32b builds

   - eth: micrel: remove latencies support lan8814

  Previous releases - regressions:

   - bpf: resolve to prog->aux->dst_prog->type only for BPF_PROG_TYPE_EXT

   - vrf: fix packet sniffing for traffic originating from ip tunnels

   - rxrpc: fix a race in rxrpc_exit_net()

   - dsa: revert "net: dsa: stop updating master MTU from master.c"

   - eth: ice: fix MAC address setting

  Previous releases - always broken:

   - tls: fix slab-out-of-bounds bug in decrypt_internal

   - bpf: support dual-stack sockets in bpf_tcp_check_syncookie

   - xdp: fix coalescing for page_pool fragment recycling

   - ovs: fix leak of nested actions

   - eth: sfc:
      - add missing xdp queue reinitialization
      - fix using uninitialized xdp tx_queue

   - eth: ice:
      - clear default forwarding VSI during VSI release
      - fix broken IFF_ALLMULTI handling
      - synchronize_rcu() when terminating rings

   - eth: qede: confirm skb is allocated before using

   - eth: aqc111: fix out-of-bounds accesses in RX fixup

   - eth: slip: fix NPD bug in sl_tx_timeout()"

* tag 'net-5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (61 commits)
  drivers: net: slip: fix NPD bug in sl_tx_timeout()
  bpf: Adjust bpf_tcp_check_syncookie selftest to test dual-stack sockets
  bpf: Support dual-stack sockets in bpf_tcp_check_syncookie
  myri10ge: fix an incorrect free for skb in myri10ge_sw_tso
  net: usb: aqc111: Fix out-of-bounds accesses in RX fixup
  qede: confirm skb is allocated before using
  net: ipv6mr: fix unused variable warning with CONFIG_IPV6_PIMSM_V2=n
  net: phy: mscc-miim: reject clause 45 register accesses
  net: axiemac: use a phandle to reference pcs_phy
  dt-bindings: net: add pcs-handle attribute
  net: axienet: factor out phy_node in struct axienet_local
  net: axienet: setup mdio unconditionally
  net: sfc: fix using uninitialized xdp tx_queue
  rxrpc: fix a race in rxrpc_exit_net()
  net: openvswitch: fix leak of nested actions
  net: ethernet: mv643xx: Fix over zealous checking of_get_mac_address()
  net: openvswitch: don't send internal clone attribute to the userspace.
  net: micrel: Fix KS8851 Kconfig
  ice: clear cmd_type_offset_bsz for TX rings
  ice: xsk: fix VSI state check in ice_xsk_wakeup()
  ...

Simply use kmemdup instead of explicitly allocating and copying memory.

Generated by: scripts/coccinelle/api/memdup.cocci
Signed-off-by: GONG, Ruiqi <gongruiqi1@huawei.com>
Link: https://lore.kernel.org/r/20220406114629.182833-1-gongruiqi1@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

That being useful for debugging purposes.

Notice that the packet descriptor is in "private" guest memory, so
that Hyper-V can not tamper with it.

While at it, remove two unnecessary u64-casts.
Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The define for_each_pci_dev(d) is:
 while ((d = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, d)) != NULL)

Thus, the list iterator 'd' is always non-NULL so it doesn't need to
be checked. So just remove the unnecessary NULL check. Also remove the
unnecessary initializer because the list iterator is always initialized.
Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com>
Link: https://lore.kernel.org/r/20220406015921.29267-1-xiam0nd.tong@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Even if an IOMMU might be present for some PCI segment in the system,
that doesn't necessarily mean it provides translation for the device
we care about. It appears that what we care about here is specifically
whether DMA mapping ops involve any IOMMU overhead or not, so check for
translation actually being active for our device.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://lore.kernel.org/r/7350f957944ecfce6cce90f422e3992a1f428775.1649166055.git.robin.murphy@arm.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

As noted in the original commit 685343fc ("net: add
name_assign_type netdev attribute")

  ... when the kernel has given the interface a name using global
  device enumeration based on order of discovery (ethX, wlanY, etc)
  ... are labelled NET_NAME_ENUM.

That describes this case, so set the default for the devices here to
NET_NAME_ENUM.  Current popular network setup tools like systemd use
this only to warn if you're setting static settings on interfaces that
might change, so it is expected this only leads to better user
information, but not changing of interfaces, etc.
Signed-off-by: Ian Wienand <iwienand@redhat.com>
Link: https://lore.kernel.org/r/20220406093635.1601506-1-iwienand@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The congestion status of a tcp flow may be updated since there
is congestion between tcp sender and receiver. It makes sense to
add tracepoint for congestion status set function to summate cc
status duration and evaluate the performance of network
and congestion algorithm. the backgound of this patch is below.

Link: https://github.com/iovisor/bcc/pull/3899Signed-off-by: Ping Gan <jacky_gam_2001@163.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20220406010956.19656-1-jacky_gam_2001@163.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Increment rx_otherhost_dropped counter when packet dropped due to
mismatched dest MAC addr.

An example when this drop can occur is when manually crafting raw
packets that will be consumed by a user space application via a tap
device. For testing purposes local traffic was generated using trafgen
for the client and netcat to start a server

Tested: Created 2 netns, sent 1 packet using trafgen from 1 to the other
with "{eth(daddr=$INCORRECT_MAC...}", verified that iproute2 showed the
counter was incremented. (Also had to modify iproute2 to show the stat,
additional patch for that coming next.)
Signed-off-by: Jeffrey Ji <jeffreyji@google.com>
Reviewed-by: Brian Vazquez <brianvv@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20220406172600.1141083-1-jeffreyjilinux@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Jakub Kicinski says:

====================
net: create a net/core/ internal header

We are adding stuff to netdevice.h which really should be
local to net/core/. Create a net/core/dev.h header and use it.
Minor cleanups precede.
====================

Link: https://lore.kernel.org/r/20220406213754.731066-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

There's a number of functions and static variables used
under net/core/ but not from the outside. We currently
dump most of them into netdevice.h. That bad for many
reasons:
 - netdevice.h is very cluttered, hard to figure out
   what the APIs are;
 - netdevice.h is very long;
 - we have to touch netdevice.h more which causes expensive
   incremental builds.

Create a header under net/core/ and move some declarations.

The new header is also a bit of a catch-all but that's
fine, if we create more specific headers people will
likely over-think where their declaration fit best.
And end up putting them in netdevice.h, again.

More work should be done on splitting netdevice.h into more
targeted headers, but that'd be more time consuming so small
steps.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

We have a bunch of functions which are only used under
net/core/ yet they get exported. Remove the exports.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Following patch will hide that typedef. There seems to be
no strong reason for hyperv to use it, so let's not.
Acked-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'hyperv-fixes-signed-20220407' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux

Pull hyperv fixes from Wei Liu:

 - Correctly propagate coherence information for VMbus devices (Michael
   Kelley)

 - Disable balloon and memory hot-add on ARM64 temporarily (Boqun Feng)

 - Use barrier to prevent reording when reading ring buffer (Michael
   Kelley)

 - Use virt_store_mb in favour of smp_store_mb (Andrea Parri)

 - Fix VMbus device object initialization (Andrea Parri)

 - Deactivate sysctl_record_panic_msg on isolated guest (Andrea Parri)

 - Fix a crash when unloading VMbus module (Guilherme G. Piccoli)

* tag 'hyperv-fixes-signed-20220407' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
  Drivers: hv: vmbus: Replace smp_store_mb() with virt_store_mb()
  Drivers: hv: balloon: Disable balloon and hot-add accordingly
  Drivers: hv: balloon: Support status report for larger page sizes
  Drivers: hv: vmbus: Prevent load re-ordering when reading ring buffer
  PCI: hv: Propagate coherence from VMbus device to PCI device
  Drivers: hv: vmbus: Propagate VMbus coherence to each VMbus device
  Drivers: hv: vmbus: Fix potential crash on module unload
  Drivers: hv: vmbus: Fix initialization of device object in vmbus_device_register()
  Drivers: hv: vmbus: Deactivate sysctl_record_panic_msg by default in isolated guests

Pull random number generator fixes from Jason Donenfeld:

 - Another fixup to the fast_init/crng_init split, this time in how much
   entropy is being credited, from Jan Varho.

 - As discussed, we now opportunistically call try_to_generate_entropy()
   in /dev/urandom reads, as a replacement for the reverted commit. I
   opted to not do the more invasive wait_for_random_bytes() change at
   least for now, preferring to do something smaller and more obvious
   for the time being, but maybe that can be revisited as things evolve
   later.

 - Userspace can use FUSE or userfaultfd or simply move a process to
   idle priority in order to make a read from the random device never
   complete, which breaks forward secrecy, fixed by overwriting
   sensitive bytes early on in the function.

 - Jann Horn noticed that /dev/urandom reads were only checking for
   pending signals if need_resched() was true, a bug going back to the
   genesis commit, now fixed by always checking for signal_pending() and
   calling cond_resched(). This explains various noticeable signal
   delivery delays I've seen in programs over the years that do long
   reads from /dev/urandom.

 - In order to be more like other devices (e.g. /dev/zero) and to
   mitigate the impact of fixing the above bug, which has been around
   forever (users have never really needed to check the return value of
   read() for medium-sized reads and so perhaps many didn't), we now
   move signal checking to the bottom part of the loop, and do so every
   PAGE_SIZE-bytes.

* tag 'random-5.18-rc2-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
  random: check for signals every PAGE_SIZE chunk of /dev/[u]random
  random: check for signal_pending() outside of need_resched() check
  random: do not allow user to keep crng key around on stack
  random: opportunistically initialize on /dev/urandom reads
  random: do not split fast init input in add_hwgenerator_randomness()