This patch introduces two new files which provide some
low level functions to interact with EP11 crypto cards:

ep11_get_card_info() sends an EP11 query module info CPRB to the
  addressed card, processes the returning reply and exposes some of
  the information returned in the new ep11_card_info struct.

ep11_get_domain_info() sends an EP11 query domain info CPRB to the
  addressed card/queue, processes the returning reply and exposes some
  of the information returned in the new ep11_domain_info struct.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

Minor rework for struct ep11_cprb and struct ep11_urb. Use of u8, u16,
u32 instead of unsigned char. Declare pointers to mem from userspace
with __user to give sparse a chance to check.

Export zcrypt_send_ep11_cprb() function as this function will be
called by code in progress which will build ep11 cprbs within the
zcrypt device driver zoo and send them to EP11 crypto cards.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

For EP11 CPRBs there was only to choose between specify
one or more ep11 targets or not give a target at all. Without
any target the zcrypt code assumed AUTOSELECT. For EP11 this
ended up in choosing any EP11 APQN with regards to the weight.

However, CCA CPRBs can have a more fine granular target
addressing. The caller can give 0xFFFF as AUTOSELECT for
the card and/or the domain. So it's possible to address
any card but domain given or any domain but card given.

This patch now introduces the very same for EP11 CPRB handling.
An EP11 target entry now may contain 0xFFFF as card and/or
domain value with the meaning of ANY card or domain. So
now the same behavior as with CCA CPRBs becomes possible:
Address any card with given domain or address any domain within
given card.

For convenience the zcrypt.h header file now has two new
defines AUTOSEL_AP and AUTOSEL_DOM covering the 0xFFFF
value to address card any and domain any.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

With this patch the paes ciphers do accept AES clear key values of
size 16, 24 or 32 byte. The key value is internal rearranged to form a
paes clear key token so that the pkey kernel module recognizes and
handles this key material as source for protected keys.

Using clear key material as a source for protected keys is a security
risc as the raw key material is kept in memory. However, so the AES
selftests provided with the testmanager can be run during registration
of the paes ciphers.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

This patch adds support for a new key blob format to the
pkey kernel module. The new key blob comprises a clear
key value together with key type information.

The implementation tries to derive an protected key
from the blob with the clear key value inside with
1) the PCKMO instruction. This may fail as the LPAR
   profile may disable this way.
2) Generate an CCA AES secure data key with exact the
   clear key value. This requires to have a working
   crypto card in CCA Coprocessor mode. Then derive
   an protected key from the CCA AES secure key again
   with the help of a working crypto card in CCA mode.
If both way fail, the transformation of the clear key
blob into a protected key will fail. For the PAES cipher
this would result in a failure at setkey() invocation.

A clear key value exposed in main memory is a security
risk. The intention of this new 'clear key blob' support
for pkey is to provide self-tests for the PAES cipher key
implementation. These known answer tests obviously need
to be run with well known key values. So with the clear
key blob format there is a way to provide knwon answer
tests together with an pkey clear key blob for the
in-kernel self tests done at cipher registration.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

There have been some findings during Eric Biggers rework of the
paes implementation which this patch tries to address:

A very minor finding within paes ctr where when the cpacf instruction
returns with only partially data en/decrytped the walk_done() was
mistakenly done with the all data counter.  Please note this can only
happen when the kmctr returns because the protected key became invalid
in the middle of the operation. And this is only with suspend and
resume on a system with different effective wrapping key.

Eric Biggers mentioned that the context struct within the tfm struct
may be shared among multiple kernel threads. So here now a rework
which uses a spinlock per context to protect the read and write of the
protected key blob value. The en/decrypt functions copy the protected
key(s) at the beginning into a param struct and do not work with the
protected key within the context any more. If the protected key in the
param struct becomes invalid, the key material is again converted to
protected key(s) and the context gets this update protected by the
spinlock. Race conditions are still possible and may result in writing
the very same protected key value more than once. So the spinlock
needs to make sure the protected key(s) within the context are
consistent updated.

The ctr page is now locked by a mutex instead of a spinlock. A similar
patch went into the aes_s390 code as a result of a complain "sleeping
function called from invalid context at ...algapi.h". See
commit 1c2c7029 ("s390/crypto: fix possible sleep during spinlock
aquired")' for more.

During testing with instrumented code another issue with the xts
en/decrypt function revealed. The retry cleared the running iv value
and thus let to wrong en/decrypted data.

Tested and verified with additional testcases via AF_ALG interface and
additional selftests within the kernel (which will be made available
as soon as possible).
Reported-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

Instead of using our own kprobes-on-ftrace handling convert the
code to support KPROBES_ON_FTRACE.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

Commit ee71d16d ("s390/mm: make TASK_SIZE independent from the number
of page table levels") changed the logic of TASK_SIZE and also removed the
arch_mmap_check() implementation for s390. This combination has a subtle
effect on how get_unmapped_area() for hugetlbfs pages works. It is now
possible that a user process establishes a hugetlbfs mapping at an address
above 4 TB, without triggering a dynamic pagetable upgrade from 3 to 4
levels.

This is because hugetlbfs mappings will not use mm->get_unmapped_area, but
rather file->f_op->get_unmapped_area, which currently is the generic
implementation of hugetlb_get_unmapped_area() that does not know about s390
dynamic pagetable upgrades, but with the new definition of TASK_SIZE, it
will now allow mappings above 4 TB.

Subsequent access to such a mapped address above 4 TB will result in a page
fault loop, because the CPU cannot translate such a large address with 3
pagetable levels. The fault handler will try to map in a hugepage at the
address, but due to the folded pagetable logic it will end up with creating
entries in the 3 level pagetable, possibly overwriting existing mappings,
and then it all repeats when the access is retried.

Apart from the page fault loop, this can have various nasty effects, e.g.
kernel panic from one of the BUG_ON() checks in memory management code,
or even data loss if an existing mapping gets overwritten.

Fix this by implementing HAVE_ARCH_HUGETLB_UNMAPPED_AREA support for s390,
providing an s390 version for hugetlb_get_unmapped_area() with pagetable
upgrade support similar to arch_get_unmapped_area(), which will then be
used instead of the generic version.

Fixes: ee71d16d ("s390/mm: make TASK_SIZE independent from the number of page table levels")
Cc: <stable@vger.kernel.org> # 4.12+
Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

Pull s390 updates from Vasily Gorbik:

 - Add clang 10 build support.

 - Fix BUG() implementation to contain precise bug address, which is
   relevant for kprobes.

 - Make ftraced function appear in a stacktrace.

 - Minor perf improvements and refactoring.

 - Possible deadlock and recovery fixes in pci code.

* tag 's390-5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390: fix __EMIT_BUG() macro
  s390/ftrace: generate traced function stack frame
  s390: adjust -mpacked-stack support check for clang 10
  s390/jump_label: use "i" constraint for clang
  s390/cpum_sf: Use DIV_ROUND_UP
  s390/cpum_sf: Use kzalloc and minor changes
  s390/cpum_sf: Convert debug trace to common layout
  s390/pci: Fix possible deadlock in recover_store()
  s390/pci: Recover handle in clp_set_pci_fn()

Pull UML updates from Anton Ivanov:
 "I am sending this on behalf of Richard who is traveling.

  This contains the following changes for UML:

   - Fix for time travel mode

   - Disable CONFIG_CONSTRUCTORS again

   - A new command line option to have an non-raw serial line

   - Preparations to remove obsolete UML network drivers"

* tag 'for-linus-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
  um: Fix time-travel=inf-cpu with xor/raid6
  Revert "um: Enable CONFIG_CONSTRUCTORS"
  um: Mark non-vector net transports as obsolete
  um: Add an option to make serial driver non-raw

Pull tracing fix from Steven Rostedt:
 "Kprobe events added 'ustring' to distinguish reading strings from
  kernel space or user space.

  But the creating of the event format file only checks for 'string' to
  display string formats. 'ustring' must also be handled"

* tag 'trace-v5.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing/kprobes: Have uname use __get_str() in print_fmt

Pull thermal updates from Daniel Lezcano:

 - Depromote debug print on the db8500 platform (Linus Walleij)

 - Fix compilation warning when compiling with make W=1 (Amit Kucheria)

 - Code cleanup and refactoring, regmap conversion and add hwmon support
   on Qoriq (Andrey Smirnov)

 - Add an idle injection cpu cooling device and its documentation,
   rename the cpu_cooling device to cpufreq_cooling device (Daniel
   Lezcano)

 - Convert unexported functions to static, add the __init annotation in
   the thermal-of code and remove the pointless wrapper functions
   (Daniel Lezcano)

 - Fix register offset for Armada XP and register reset bit
   initialization (Zak Hays)

 - Enable hwmon on the rockchip (Stefan Schaeckeler)

 - Add the thermal sensor for the H6/H5/H3/A64/A83T/R40 sun8i platform
   and their device tree bindings, followed by a fix for the ths number
   and the sparse warnings (Yangtao Li)

 - Code cleansup for the sun8i and hwmon support (Yangtao Li)

 - Silent some messages which are misleading given the changes made in
   the previous version on generic-adc (Martin Blumenstingl)

 - Rename exynos to Exynos (Krzysztof Kozlowski)

 - Add the bcm2711 thermal driver with the device tree bindings (Stefan
   Wahren)

 - Use usleep_range() instead of udelay() as the call is always done in
   a sleep-able context (Geert Uytterhoeven)

 - Do code cleanup and re-organization to set the scene for a new
   process for the brcmstb (Florian Fainelli)

 - Fix bindings check issues on brcm (Stefan Wahren)

 - Add Jasper Lake support on int340x (Nivedita Swaminathan)

 - Add Comet Lake support on intel pch (Gayatri Kammela)

 - Fix unmatched pci_release_region() on x86 (Chuhong Yuan)

 - Remove temperature boundaries for rcar and rcar3 (Niklas Söderlund)

 - Fix return value to -ENODEV when thermal_zone_of_sensor_register() is
   called with the of-node is missing (Peter Mamonov)

 - Code cleanup, interrupt bouncing, and better support on stm32 (Pascal
   Paillet)

* tag 'thermal-v5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (66 commits)
  thermal: stm32: Fix low threshold interrupt flood
  thermal: stm32: Improve temperature computing
  thermal: stm32: Handle multiple trip points
  thermal: stm32: Disable interrupts at probe
  thermal: stm32: Rework sensor mode management
  thermal: stm32: Fix icifr register name
  thermal: of: Make thermal_zone_of_sensor_register return -ENODEV if a sensor OF node is missing
  thermal: rcar_gen3_thermal: Remove temperature bound
  thermal: rcar_thermal: Remove temperature bound
  thermal: intel: intel_pch_thermal: Add Comet Lake (CML) platform support
  thermal: intel: Fix unmatched pci_release_region
  thermal: int340x: processor_thermal: Add Jasper Lake support
  dt-bindings: brcm,avs-ro-thermal: Fix binding check issues
  thermal: brcmstb_thermal: Register different ops per process
  thermal: brcmstb_thermal: Restructure interrupt registration
  thermal: brcmstb_thermal: Add 16nm process thermal parameters
  dt-bindings: thermal: Define BCM7216 thermal sensor compatible
  thermal: brcmstb_thermal: Prepare to support a different process
  thermal: brcmstb_thermal: Do not use DT coefficients
  thermal: rcar_thermal: Use usleep_range() instead of udelay()
  ...

Pull sound updates from Takashi Iwai:
 "As the diffstat shows we've had again a lot of works done for this
  cycle: the majority of changes are the continued componentization and
  code refactoring in ASoC, the tree-wide PCM API updates and cleanups
  and SOF updates while a few ASoC driver updates are seen, too.

  Here we go, some highlights:

  Core:
   - Finally y2038 support landed to ALSA ABI; some ioctls have been
     extended and lots of tricks were applied
   - Applying the new managed PCM buffer API to all drivers; the API
     itself was already merged in 5.5
   - The already deprecated dimension support in ALSA control API is
     dropped completely now
   - Verification of ALSA control elements to catch API misuses

  ASoC:
   - Further code refactorings and moving things to the component level
   - Lots of updates and improvements on SOF / Intel drivers; now
     including common HDMI driver and SoundWire support
   - New driver support for Ingenic JZ4770, Mediatek MT6660, Qualcomm
     WCD934x and WSA881x, and Realtek RT700, RT711, RT715, RT1011,
     RT1015 and RT1308

  HD-audio:
   - Improved ring-buffer communications using waitqueue
   - Drop the superfluous buffer preallocation on x86

  Others:
   - Many code cleanups, mostly constifications over the whole tree
   - USB-audio: quirks for MOTU, Corsair Virtuoso, Line6 Helix
   - FireWire: code refactoring for oxfw and dice drivers"

* tag 'sound-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (638 commits)
  ALSA: usb-audio: add quirks for Line6 Helix devices fw>=2.82
  ALSA: hda: Add Clevo W65_67SB the power_save blacklist
  ASoC: soc-core: remove null_snd_soc_ops
  ASoC: soc-pcm: add soc_rtd_trigger()
  ASoC: soc-pcm: add soc_rtd_hw_free()
  ASoC: soc-pcm: add soc_rtd_hw_params()
  ASoC: soc-pcm: add soc_rtd_prepare()
  ASoC: soc-pcm: add soc_rtd_shutdown()
  ASoC: soc-pcm: add soc_rtd_startup()
  ASoC: rt1015: add rt1015 amplifier driver
  ASoC: madera: Correct some kernel doc
  ASoC: topology: fix soc_tplg_fe_link_create() - link->dobj initialization order
  ASoC: Intel: skl_hda_dsp_common: Fix global-out-of-bounds bug
  ASoC: madera: Correct DMIC only input hook ups
  ALSA: cs46xx: fix spelling mistake "to" -> "too"
  ALSA: hda - Add docking station support for Lenovo Thinkpad T420s
  ASoC: Add MediaTek MT6660 Speaker Amp Driver
  ASoC: dt-bindings: rt5645: add suppliers
  ASoC: max98090: fix deadlock in max98090_dapm_put_enum_double()
  ASoC: dapm: add snd_soc_dapm_put_enum_double_locked
  ...

Pull networking updates from David Miller:

 1) Add WireGuard

 2) Add HE and TWT support to ath11k driver, from John Crispin.

 3) Add ESP in TCP encapsulation support, from Sabrina Dubroca.

 4) Add variable window congestion control to TIPC, from Jon Maloy.

 5) Add BCM84881 PHY driver, from Russell King.

 6) Start adding netlink support for ethtool operations, from Michal
    Kubecek.

 7) Add XDP drop and TX action support to ena driver, from Sameeh
    Jubran.

 8) Add new ipv4 route notifications so that mlxsw driver does not have
    to handle identical routes itself. From Ido Schimmel.

 9) Add BPF dynamic program extensions, from Alexei Starovoitov.

10) Support RX and TX timestamping in igc, from Vinicius Costa Gomes.

11) Add support for macsec HW offloading, from Antoine Tenart.

12) Add initial support for MPTCP protocol, from Christoph Paasch,
    Matthieu Baerts, Florian Westphal, Peter Krystad, and many others.

13) Add Octeontx2 PF support, from Sunil Goutham, Geetha sowjanya, Linu
    Cherian, and others.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1469 commits)
  net: phy: add default ARCH_BCM_IPROC for MDIO_BCM_IPROC
  udp: segment looped gso packets correctly
  netem: change mailing list
  qed: FW 8.42.2.0 debug features
  qed: rt init valid initialization changed
  qed: Debug feature: ilt and mdump
  qed: FW 8.42.2.0 Add fw overlay feature
  qed: FW 8.42.2.0 HSI changes
  qed: FW 8.42.2.0 iscsi/fcoe changes
  qed: Add abstraction for different hsi values per chip
  qed: FW 8.42.2.0 Additional ll2 type
  qed: Use dmae to write to widebus registers in fw_funcs
  qed: FW 8.42.2.0 Parser offsets modified
  qed: FW 8.42.2.0 Queue Manager changes
  qed: FW 8.42.2.0 Expose new registers and change windows
  qed: FW 8.42.2.0 Internal ram offsets modifications
  MAINTAINERS: Add entry for Marvell OcteonTX2 Physical Function driver
  Documentation: net: octeontx2: Add RVU HW and drivers overview
  octeontx2-pf: ethtool RSS config support
  octeontx2-pf: Add basic ethtool support
  ...

Pull crypto updates from Herbert Xu:
 "API:
   - Removed CRYPTO_TFM_RES flags
   - Extended spawn grabbing to all algorithm types
   - Moved hash descsize verification into API code

  Algorithms:
   - Fixed recursive pcrypt dead-lock
   - Added new 32 and 64-bit generic versions of poly1305
   - Added cryptogams implementation of x86/poly1305

  Drivers:
   - Added support for i.MX8M Mini in caam
   - Added support for i.MX8M Nano in caam
   - Added support for i.MX8M Plus in caam
   - Added support for A33 variant of SS in sun4i-ss
   - Added TEE support for Raven Ridge in ccp
   - Added in-kernel API to submit TEE commands in ccp
   - Added AMD-TEE driver
   - Added support for BCM2711 in iproc-rng200
   - Added support for AES256-GCM based ciphers for chtls
   - Added aead support on SEC2 in hisilicon"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (244 commits)
  crypto: arm/chacha - fix build failured when kernel mode NEON is disabled
  crypto: caam - add support for i.MX8M Plus
  crypto: x86/poly1305 - emit does base conversion itself
  crypto: hisilicon - fix spelling mistake "disgest" -> "digest"
  crypto: chacha20poly1305 - add back missing test vectors and test chunking
  crypto: x86/poly1305 - fix .gitignore typo
  tee: fix memory allocation failure checks on drv_data and amdtee
  crypto: ccree - erase unneeded inline funcs
  crypto: ccree - make cc_pm_put_suspend() void
  crypto: ccree - split overloaded usage of irq field
  crypto: ccree - fix PM race condition
  crypto: ccree - fix FDE descriptor sequence
  crypto: ccree - cc_do_send_request() is void func
  crypto: ccree - fix pm wrongful error reporting
  crypto: ccree - turn errors to debug msgs
  crypto: ccree - fix AEAD decrypt auth fail
  crypto: ccree - fix typo in comment
  crypto: ccree - fix typos in error msgs
  crypto: atmel-{aes,sha,tdes} - Retire crypto_platform_data
  crypto: x86/sha - Eliminate casts on asm implementations
  ...

Pull cifs updates from Steve French:
 "Various SMB3/CIFS fixes including four for stable.

   - Improvement to fallocate (enables 3 additional xfstests)

   - Fix for file creation when mounting with modefromsid

   - Add ability to backup/restore dos attributes and creation time

   - DFS failover and reconnect fixes

   - performance optimization for readir

  Note that due to the upcoming SMB3 Test Event (at SNIA SDC next week)
  there will likely be more changesets near the end of the merge window
  (since we will be testing heavily next week, I held off on some
  patches and I expect some additional multichannel patches as well as
  patches to enable some additional xfstests)"

* tag '5.6-smb3-fixes-and-dfs-and-readdir-improvements' of git://git.samba.org/sfrench/cifs-2.6: (24 commits)
  CIFS: Fix task struct use-after-free on reconnect
  cifs: use PTR_ERR_OR_ZERO() to simplify code
  cifs: add support for fallocate mode 0 for non-sparse files
  cifs: fix NULL dereference in match_prepath
  smb3: fix default permissions on new files when mounting with modefromsid
  CIFS: Add support for setting owner info, dos attributes, and create time
  cifs: remove set but not used variable 'server'
  cifs: Fix memory allocation in __smb2_handle_cancelled_cmd()
  cifs: Fix mount options set in automount
  cifs: fix unitialized variable poential problem with network I/O cache lock patch
  cifs: Fix return value in __update_cache_entry
  cifs: Avoid doing network I/O while holding cache lock
  cifs: Fix potential deadlock when updating vol in cifs_reconnect()
  cifs: Merge is_path_valid() into get_normalized_path()
  cifs: Introduce helpers for finding TCP connection
  cifs: Get rid of kstrdup_const()'d paths
  cifs: Clean up DFS referral cache
  cifs: Don't use iov_iter::type directly
  cifs: set correct max-buffer-size for smb2_ioctl_init()
  cifs: use compounding for open and first query-dir for readdir()
  ...

Pull fsverity updates from Eric Biggers:

 - Optimize fs-verity sequential read performance by implementing
   readahead of Merkle tree pages. This allows the Merkle tree to be
   read in larger chunks.

 - Optimize FS_IOC_ENABLE_VERITY performance in the uncached case by
   implementing readahead of data pages.

 - Allocate the hash requests from a mempool in order to eliminate the
   possibility of allocation failures during I/O.

* tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt:
  fs-verity: use u64_to_user_ptr()
  fs-verity: use mempool for hash requests
  fs-verity: implement readahead of Merkle tree pages
  fs-verity: implement readahead for FS_IOC_ENABLE_VERITY

Pull fscrypt updates from Eric Biggers:

 - Extend the FS_IOC_ADD_ENCRYPTION_KEY ioctl to allow the raw key to be
   provided via a keyring key.

 - Prepare for the new dirhash method (SipHash of plaintext name) that
   will be used by directories that are both encrypted and casefolded.

 - Switch to a new format for "no-key names" that prepares for the new
   dirhash method, and also fixes a longstanding bug where multiple
   filenames could map to the same no-key name.

 - Allow the crypto algorithms used by fscrypt to be built as loadable
   modules when the fscrypt-capable filesystems are.

 - Optimize fscrypt_zeroout_range().

 - Various cleanups.

* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt: (26 commits)
  fscrypt: improve format of no-key names
  ubifs: allow both hash and disk name to be provided in no-key names
  ubifs: don't trigger assertion on invalid no-key filename
  fscrypt: clarify what is meant by a per-file key
  fscrypt: derive dirhash key for casefolded directories
  fscrypt: don't allow v1 policies with casefolding
  fscrypt: add "fscrypt_" prefix to fname_encrypt()
  fscrypt: don't print name of busy file when removing key
  ubifs: use IS_ENCRYPTED() instead of ubifs_crypt_is_encrypted()
  fscrypt: document gfp_flags for bounce page allocation
  fscrypt: optimize fscrypt_zeroout_range()
  fscrypt: remove redundant bi_status check
  fscrypt: Allow modular crypto algorithms
  fscrypt: include <linux/ioctl.h> in UAPI header
  fscrypt: don't check for ENOKEY from fscrypt_get_encryption_info()
  fscrypt: remove fscrypt_is_direct_key_policy()
  fscrypt: move fscrypt_valid_enc_modes() to policy.c
  fscrypt: check for appropriate use of DIRECT_KEY flag earlier
  fscrypt: split up fscrypt_supported_policy() by policy version
  fscrypt: introduce fscrypt_needs_contents_encryption()
  ...

Pull fs deduplication fix from David Sterba:
 "This is a fix for deduplication bug: the last block of two files is
  allowed to deduplicated. This got broken in 5.1 by lifting some
  generic checks to VFS layer. The affected filesystems are btrfs and
  xfs.

  The patches are marked for stable as the bug decreases deduplication
  effectivity"

* tag 'fs-dedupe-last-block-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  Btrfs: make deduplication with range including the last block work
  fs: allow deduplication of eof block into the end of the destination file

Pull btrfs updates from David Sterba:
 "Features, highlights:

   - async discard
       - "mount -o discard=async" to enable it
       - freed extents are not discarded immediatelly, but grouped
         together and trimmed later, with IO rate limiting
       - the "sync" mode submits short extents that could have been
         ignored completely by the device, for SATA prior to 3.1 the
         requests are unqueued and have a big impact on performance
       - the actual discard IO requests have been moved out of
         transaction commit to a worker thread, improving commit latency
       - IO rate and request size can be tuned by sysfs files, for now
         enabled only with CONFIG_BTRFS_DEBUG as we might need to
         add/delete the files and don't have a stable-ish ABI for
         general use, defaults are conservative

   - export device state info in sysfs, eg. missing, writeable

   - no discard of extents known to be untouched on disk (eg. after
     reservation)

   - device stats reset is logged with process name and PID that called
     the ioctl

  Fixes:

   - fix missing hole after hole punching and fsync when using NO_HOLES

   - writeback: range cyclic mode could miss some dirty pages and lead
     to OOM

   - two more corner cases for metadata_uuid change after power loss
     during the change

   - fix infinite loop during fsync after mix of rename operations

  Core changes:

   - qgroup assign returns ENOTCONN when quotas not enabled, used to
     return EINVAL that was confusing

   - device closing does not need to allocate memory anymore

   - snapshot aware code got removed, disabled for years due to
     performance problems, reimplmentation will allow to select wheter
     defrag breaks or does not break COW on shared extents

   - tree-checker:
       - check leaf chunk item size, cross check against number of
         stripes
       - verify location keys for DIR_ITEM, DIR_INDEX and XATTR items

   - new self test for physical -> logical mapping code, used for super
     block range exclusion

   - assertion helpers/macros updated to avoid objtool "unreachable
     code" reports on older compilers or config option combinations"

* tag 'for-5.6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (84 commits)
  btrfs: free block groups after free'ing fs trees
  btrfs: Fix split-brain handling when changing FSID to metadata uuid
  btrfs: Handle another split brain scenario with metadata uuid feature
  btrfs: Factor out metadata_uuid code from find_fsid.
  btrfs: Call find_fsid from find_fsid_inprogress
  Btrfs: fix infinite loop during fsync after rename operations
  btrfs: set trans->drity in btrfs_commit_transaction
  btrfs: drop log root for dropped roots
  btrfs: sysfs, add devid/dev_state kobject and device attributes
  btrfs: Refactor btrfs_rmap_block to improve readability
  btrfs: Add self-tests for btrfs_rmap_block
  btrfs: selftests: Add support for dummy devices
  btrfs: Move and unexport btrfs_rmap_block
  btrfs: separate definition of assertion failure handlers
  btrfs: device stats, log when stats are zeroed
  btrfs: fix improper setting of scanned for range cyclic write cache pages
  btrfs: safely advance counter when looking up bio csums
  btrfs: remove unused member btrfs_device::work
  btrfs: remove unnecessary wrapper get_alloc_profile
  btrfs: add correction to handle -1 edge case in async discard
  ...

Pull x86 mtrr updates from Ingo Molnar:
 "Two changes: restrict /proc/mtrr to CAP_SYS_ADMIN, plus a cleanup"

* 'x86-mtrr-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mtrr: Require CAP_SYS_ADMIN for all access
  x86/mtrr: Get rid of mtrr_seq_show() forward declaration

Pull x86 FPU updates from Ingo Molnar:
 "Three changes: fix a race that can result in FPU corruption, plus two
  cleanups"

* 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/fpu: Deactivate FPU state after failure during state load
  x86/fpu/xstate: Make xfeature_is_supervisor()/xfeature_is_user() return bool
  x86/fpu/xstate: Fix small issues

Pull x86 cpu-features updates from Ingo Molnar:
 "The biggest change in this cycle was a large series from Sean
  Christopherson to clean up the handling of VMX features. This both
  fixes bugs/inconsistencies and makes the code more coherent and
  future-proof.

  There are also two cleanups and a minor TSX syslog messages
  enhancement"

* 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
  x86/cpu: Remove redundant cpu_detect_cache_sizes() call
  x86/cpu: Print "VMX disabled" error message iff KVM is enabled
  KVM: VMX: Allow KVM_INTEL when building for Centaur and/or Zhaoxin CPUs
  perf/x86: Provide stubs of KVM helpers for non-Intel CPUs
  KVM: VMX: Use VMX_FEATURE_* flags to define VMCS control bits
  KVM: VMX: Check for full VMX support when verifying CPU compatibility
  KVM: VMX: Use VMX feature flag to query BIOS enabling
  KVM: VMX: Drop initialization of IA32_FEAT_CTL MSR
  x86/cpufeatures: Add flag to track whether MSR IA32_FEAT_CTL is configured
  x86/cpu: Set synthetic VMX cpufeatures during init_ia32_feat_ctl()
  x86/cpu: Print VMX flags in /proc/cpuinfo using VMX_FEATURES_*
  x86/cpu: Detect VMX features on Intel, Centaur and Zhaoxin CPUs
  x86/vmx: Introduce VMX_FEATURES_*
  x86/cpu: Clear VMX feature flag if VMX is not fully enabled
  x86/zhaoxin: Use common IA32_FEAT_CTL MSR initialization
  x86/centaur: Use common IA32_FEAT_CTL MSR initialization
  x86/mce: WARN once if IA32_FEAT_CTL MSR is left unlocked
  x86/intel: Initialize IA32_FEAT_CTL MSR at boot
  tools/x86: Sync msr-index.h from kernel sources
  selftests, kvm: Replace manual MSR defs with common msr-index.h
  ...

Pull misc x86 updates from Ingo Molnar:
 "Misc changes:

   - Enhance #GP fault printouts by distinguishing between canonical and
     non-canonical address faults, and also add KASAN fault decoding.

   - Fix/enhance the x86 NMI handler by putting the duration check into
     a direct function call instead of an irq_work which we know to be
     broken in some cases.

   - Clean up do_general_protection() a bit"

* 'x86-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/nmi: Remove irq_work from the long duration NMI handler
  x86/traps: Cleanup do_general_protection()
  x86/kasan: Print original address on #GP
  x86/dumpstack: Introduce die_addr() for die() with #GP fault address
  x86/traps: Print address on #GP
  x86/insn-eval: Add support for 64-bit kernel mode

Pull x86 cleanups from Ingo Molnar:
 "Misc cleanups all around the map"

* 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/CPU/AMD: Remove amd_get_topology_early()
  x86/tsc: Remove redundant assignment
  x86/crash: Use resource_size()
  x86/cpu: Add a missing prototype for arch_smt_update()
  x86/nospec: Remove unused RSB_FILL_LOOPS
  x86/vdso: Provide missing include file
  x86/Kconfig: Correct spelling and punctuation
  Documentation/x86/boot: Fix typo
  x86/boot: Fix a comment's incorrect file reference
  x86/process: Remove set but not used variables prev and next
  x86/Kconfig: Fix Kconfig indentation

Pull x86 resource control updates from Ingo Molnar:
 "The main change in this tree is the extension of the resctrl procfs
  ABI with a new file that helps tooling to navigate from tasks back to
  resctrl groups: /proc/{pid}/cpu_resctrl_groups.

  Also fix static key usage for certain feature combinations and
  simplify the task exit resctrl case"

* 'x86-cache-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/resctrl: Add task resctrl information display
  x86/resctrl: Check monitoring static key in the MBM overflow handler
  x86/resctrl: Do not reconfigure exiting tasks

Pull x86 boot update from Ingo Molnar:
 "Two minor changes: fix an atypical binutils combination build bug, and
  also fix a VRAM size check for simplefb"

* 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/sysfb: Fix check for bad VRAM size
  x86/boot: Discard .eh_frame sections

Pull x86 asm updates from Ingo Molnar:
 "Misc updates:

   - Remove last remaining calls to exception_enter/exception_exit() and
     simplify the entry code some more.

   - Remove force_iret()

   - Add support for "Fast Short Rep Mov", which is available starting
     with Ice Lake Intel CPUs - and make the x86 assembly version of
     memmove() use REP MOV for all sizes when FSRM is available.

   - Micro-optimize/simplify the 32-bit boot code a bit.

   - Use a more future-proof SYSRET instruction mnemonic"

* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/boot: Simplify calculation of output address
  x86/entry/64: Add instruction suffix to SYSRET
  x86: Remove force_iret()
  x86/cpufeatures: Add support for fast short REP; MOVSB
  x86/context-tracking: Remove exception_enter/exit() from KVM_PV_REASON_PAGE_NOT_PRESENT async page fault
  x86/context-tracking: Remove exception_enter/exit() from do_page_fault()

Pull x86 apic fix from Ingo Molnar:
 "A single commit that simplifies the code and gets rid of a compiler
  warning"

* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/apic/uv: Avoid unused variable warning

Pull scheduler updates from Ingo Molnar:
 "These were the main changes in this cycle:

   - More -rt motivated separation of CONFIG_PREEMPT and
     CONFIG_PREEMPTION.

   - Add more low level scheduling topology sanity checks and warnings
     to filter out nonsensical topologies that break scheduling.

   - Extend uclamp constraints to influence wakeup CPU placement

   - Make the RT scheduler more aware of asymmetric topologies and CPU
     capacities, via uclamp metrics, if CONFIG_UCLAMP_TASK=y

   - Make idle CPU selection more consistent

   - Various fixes, smaller cleanups, updates and enhancements - please
     see the git log for details"

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (58 commits)
  sched/fair: Define sched_idle_cpu() only for SMP configurations
  sched/topology: Assert non-NUMA topology masks don't (partially) overlap
  idle: fix spelling mistake "iterrupts" -> "interrupts"
  sched/fair: Remove redundant call to cpufreq_update_util()
  sched/psi: create /proc/pressure and /proc/pressure/{io|memory|cpu} only when psi enabled
  sched/fair: Fix sgc->{min,max}_capacity calculation for SD_OVERLAP
  sched/fair: calculate delta runnable load only when it's needed
  sched/cputime: move rq parameter in irqtime_account_process_tick
  stop_machine: Make stop_cpus() static
  sched/debug: Reset watchdog on all CPUs while processing sysrq-t
  sched/core: Fix size of rq::uclamp initialization
  sched/uclamp: Fix a bug in propagating uclamp value in new cgroups
  sched/fair: Load balance aggressively for SCHED_IDLE CPUs
  sched/fair : Improve update_sd_pick_busiest for spare capacity case
  watchdog: Remove soft_lockup_hrtimer_cnt and related code
  sched/rt: Make RT capacity-aware
  sched/fair: Make EAS wakeup placement consider uclamp restrictions
  sched/fair: Make task_fits_capacity() consider uclamp restrictions
  sched/uclamp: Rename uclamp_util_with() into uclamp_rq_util_with()
  sched/uclamp: Make uclamp util helpers use and return UL values
  ...

Pull perf updates from Ingo Molnar:
 "Kernel side changes:

   - Ftrace is one of the last W^X violators (after this only KLP is
     left). These patches move it over to the generic text_poke()
     interface and thereby get rid of this oddity. This requires a
     surprising amount of surgery, by Peter Zijlstra.

   - x86/AMD PMUs: add support for 'Large Increment per Cycle Events' to
     count certain types of events that have a special, quirky hw ABI
     (by Kim Phillips)

   - kprobes fixes by Masami Hiramatsu

  Lots of tooling updates as well, the following subcommands were
  updated: annotate/report/top, c2c, clang, record, report/top TUI,
  sched timehist, tests; plus updates were done to the gtk ui, libperf,
  headers and the parser"

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (57 commits)
  perf/x86/amd: Add support for Large Increment per Cycle Events
  perf/x86/amd: Constrain Large Increment per Cycle events
  perf/x86/intel/rapl: Add Comet Lake support
  tracing: Initialize ret in syscall_enter_define_fields()
  perf header: Use last modification time for timestamp
  perf c2c: Fix return type for histogram sorting comparision functions
  perf beauty sockaddr: Fix augmented syscall format warning
  perf/ui/gtk: Fix gtk2 build
  perf ui gtk: Add missing zalloc object
  perf tools: Use %define api.pure full instead of %pure-parser
  libperf: Setup initial evlist::all_cpus value
  perf report: Fix no libunwind compiled warning break s390 issue
  perf tools: Support --prefix/--prefix-strip
  perf report: Clarify in help that --children is default
  tools build: Fix test-clang.cpp with Clang 8+
  perf clang: Fix build with Clang 9
  kprobes: Fix optimize_kprobe()/unoptimize_kprobe() cancellation logic
  tools lib: Fix builds when glibc contains strlcpy()
  perf report/top: Make 'e' visible in the help and make it toggle showing callchains
  perf report/top: Do not offer annotation for symbols without samples
  ...

Pull locking updates from Ingo Molnar:
 "Just a handful of changes in this cycle: an ARM64 performance
  optimization, a comment fix and a debug output fix"

* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/osq: Use optimized spinning loop for arm64
  locking/qspinlock: Fix inaccessible URL of MCS lock paper
  locking/lockdep: Fix lockdep_stats indentation problem

Pull EFI updates from Ingo Molnar:
 "The main changes in this cycle were:

   - Cleanup of the GOP [graphics output] handling code in the EFI stub

   - Complete refactoring of the mixed mode handling in the x86 EFI stub

   - Overhaul of the x86 EFI boot/runtime code

   - Increase robustness for mixed mode code

   - Add the ability to disable DMA at the root port level in the EFI
     stub

   - Get rid of RWX mappings in the EFI memory map and page tables,
     where possible

   - Move the support code for the old EFI memory mapping style into its
     only user, the SGI UV1+ support code.

   - plus misc fixes, updates, smaller cleanups.

  ... and due to interactions with the RWX changes, another round of PAT
  cleanups make a guest appearance via the EFI tree - with no side
  effects intended"

* 'efi-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (75 commits)
  efi/x86: Disable instrumentation in the EFI runtime handling code
  efi/libstub/x86: Fix EFI server boot failure
  efi/x86: Disallow efi=old_map in mixed mode
  x86/boot/compressed: Relax sed symbol type regex for LLVM ld.lld
  efi/x86: avoid KASAN false positives when accessing the 1: 1 mapping
  efi: Fix handling of multiple efi_fake_mem= entries
  efi: Fix efi_memmap_alloc() leaks
  efi: Add tracking for dynamically allocated memmaps
  efi: Add a flags parameter to efi_memory_map
  efi: Fix comment for efi_mem_type() wrt absent physical addresses
  efi/arm: Defer probe of PCIe backed efifb on DT systems
  efi/x86: Limit EFI old memory map to SGI UV machines
  efi/x86: Avoid RWX mappings for all of DRAM
  efi/x86: Don't map the entire kernel text RW for mixed mode
  x86/mm: Fix NX bit clearing issue in kernel_map_pages_in_pgd
  efi/libstub/x86: Fix unused-variable warning
  efi/libstub/x86: Use mandatory 16-byte stack alignment in mixed mode
  efi/libstub/x86: Use const attribute for efi_is_64bit()
  efi: Allow disabling PCI busmastering on bridges during boot
  efi/x86: Allow translating 64-bit arguments for mixed mode calls
  ...

Pull RCU updates from Ingo Molnar:
 "The RCU changes in this cycle were:
   - Expedited grace-period updates
   - kfree_rcu() updates
   - RCU list updates
   - Preemptible RCU updates
   - Torture-test updates
   - Miscellaneous fixes
   - Documentation updates"

* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (69 commits)
  rcu: Remove unused stop-machine #include
  powerpc: Remove comment about read_barrier_depends()
  .mailmap: Add entries for old paulmck@kernel.org addresses
  srcu: Apply *_ONCE() to ->srcu_last_gp_end
  rcu: Switch force_qs_rnp() to for_each_leaf_node_cpu_mask()
  rcu: Move rcu_{expedited,normal} definitions into rcupdate.h
  rcu: Move gp_state_names[] and gp_state_getname() to tree_stall.h
  rcu: Remove the declaration of call_rcu() in tree.h
  rcu: Fix tracepoint tracking RCU CPU kthread utilization
  rcu: Fix harmless omission of "CONFIG_" from #if condition
  rcu: Avoid tick_dep_set_cpu() misordering
  rcu: Provide wrappers for uses of ->rcu_read_lock_nesting
  rcu: Use READ_ONCE() for ->expmask in rcu_read_unlock_special()
  rcu: Clear ->rcu_read_unlock_special only once
  rcu: Clear .exp_hint only when deferred quiescent state has been reported
  rcu: Rename some instance of CONFIG_PREEMPTION to CONFIG_PREEMPT_RCU
  rcu: Remove kfree_call_rcu_nobatch()
  rcu: Remove kfree_rcu() special casing and lazy-callback handling
  rcu: Add support for debug_objects debugging for kfree_rcu()
  rcu: Add multiple in-flight batches of kfree_rcu() work
  ...

Pull objtool updates from Ingo Molnar:
 "The main changes are to move the ORC unwind table sorting from early
  init to build-time - this speeds up booting.

  No change in functionality intended"

* 'core-objtool-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/unwind/orc: Fix !CONFIG_MODULES build warning
  x86/unwind/orc: Remove boot-time ORC unwind tables sorting
  scripts/sorttable: Implement build-time ORC unwind table sorting
  scripts/sorttable: Rename 'sortextable' to 'sorttable'
  scripts/sortextable: Refactor the do_func() function
  scripts/sortextable: Remove dead code
  scripts/sortextable: Clean up the code to meet the kernel coding style better
  scripts/sortextable: Rewrite error/success handling

Pull header cleanup from Ingo Molnar:
 "This is a treewide cleanup, mostly (but not exclusively) with x86
  impact, which breaks implicit dependencies on the asm/realtime.h
  header and finally removes it from asm/acpi.h"

* 'core-headers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/ACPI/sleep: Move acpi_get_wakeup_address() into sleep.c, remove <asm/realmode.h> from <asm/acpi.h>
  ACPI/sleep: Convert acpi_wakeup_address into a function
  x86/ACPI/sleep: Remove an unnecessary include of asm/realmode.h
  ASoC: Intel: Skylake: Explicitly include linux/io.h for virt_to_phys()
  vmw_balloon: Explicitly include linux/io.h for virt_to_phys()
  virt: vbox: Explicitly include linux/io.h to pick up various defs
  efi/capsule-loader: Explicitly include linux/io.h for page_to_phys()
  perf/x86/intel: Explicitly include asm/io.h to use virt_to_phys()
  x86/kprobes: Explicitly include vmalloc.h for set_vm_flush_reset_perms()
  x86/ftrace: Explicitly include vmalloc.h for set_vm_flush_reset_perms()
  x86/boot: Explicitly include realmode.h to handle RM reservations
  x86/efi: Explicitly include realmode.h to handle RM trampoline quirk
  x86/platform/intel/quark: Explicitly include linux/io.h for virt_to_phys()
  x86/setup: Enhance the comments
  x86/setup: Clean up the header portion of setup.c

Add default MDIO_BCM_IPROC Kconfig setting such that it is default
on for IPROC family of devices.
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Multicast and broadcast packets can be looped from egress to ingress
pre segmentation with dev_loopback_xmit. That function unconditionally
sets ip_summed to CHECKSUM_UNNECESSARY.

udp_rcv_segment segments gso packets in the udp rx path. Segmentation
usually executes on egress, and does not expect packets of this type.
__udp_gso_segment interprets !CHECKSUM_PARTIAL as CHECKSUM_NONE. But
the offsets are not correct for gso_make_checksum.

UDP GSO packets are of type CHECKSUM_PARTIAL, with their uh->check set
to the correct pseudo header checksum. Reset ip_summed to this type.
(CHECKSUM_PARTIAL is allowed on ingress, see comments in skbuff.h)
Reported-by: syzbot <syzkaller@googlegroups.com>
Fixes: cf329aa4 ("udp: cope with UDP GRO packet misdirection")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The old netem mailing list was inactive and recently was targeted by
spammers. Switch to just using netdev mailing list which is where all
the real change happens.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Ingo Molnar <mingo@kernel.org>