The macb mii setup (mii_probe() and mii_init()) previously was
somewhat interspersed, likely a result of organic growth and hacking.

This change moves mii bus registration into mii_init and probing the
bus for devices into mii_probe.
Signed-off-by: Brad Mouring <brad.mouring@ni.com>
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The packet_mmap documentation had links to no longer existing web
sites; replace with other site which has similar example.

Support for packet mmap has been in mainline versions of libpcap
for several years.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit d1179094 ("enic: Add vxlan offload support for IPv6 pkts")
added vxlan offload support for IPv6 pkts. Required change in
enic_udp_tunnel_del was not made. This creates a bug where once user
adds IPv6 tunnel, hw offload for that cannot be deleted.

This patch removes check for IP proto in tunnel delete path. Driver need
not check for IP proto since same UDP port cannot be used to create two
tunnels.

Fixes: d1179094 ("enic: Add vxlan offload support for IPv6 pkts")
Signed-off-by: Govindarajulu Varadarajan <gvaradar@cisco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The variable 'len' is being initialized with a value that is never
read and it is re-assigned later, hence the initialization is redundant
and can be removed.

Cleans up clang warning:
net/rxrpc/recvmsg.c:275:15: warning: Value stored to 'len' during its
initialization is never read
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

syzbot/kasan detected a double free in sctp_sendmsg_to_asoc:
BUG: KASAN: use-after-free in sctp_association_free+0x7b7/0x930
net/sctp/associola.c:332
Read of size 8 at addr ffff8801d8006ae0 by task syzkaller914861/4202

CPU: 1 PID: 4202 Comm: syzkaller914861 Not tainted 4.16.0-rc4+ #258
Hardware name: Google Google Compute Engine/Google Compute Engine
01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:17 [inline]
 dump_stack+0x194/0x24d lib/dump_stack.c:53
 print_address_description+0x73/0x250 mm/kasan/report.c:256
 kasan_report_error mm/kasan/report.c:354 [inline]
 kasan_report+0x23c/0x360 mm/kasan/report.c:412
 __asan_report_load8_noabort+0x14/0x20 mm/kasan/report.c:433
 sctp_association_free+0x7b7/0x930 net/sctp/associola.c:332
 sctp_sendmsg+0xc67/0x1a80 net/sctp/socket.c:2075
 inet_sendmsg+0x11f/0x5e0 net/ipv4/af_inet.c:763
 sock_sendmsg_nosec net/socket.c:629 [inline]
 sock_sendmsg+0xca/0x110 net/socket.c:639
 SYSC_sendto+0x361/0x5c0 net/socket.c:1748
 SyS_sendto+0x40/0x50 net/socket.c:1716
 do_syscall_64+0x281/0x940 arch/x86/entry/common.c:287
 entry_SYSCALL_64_after_hwframe+0x42/0xb7

This was introduced by commit:
f84af331 sctp: factor out sctp_sendmsg_to_asoc from sctp_sendmsg

As the newly refactored function moved the wait_for_sndbuf call to a
point after the association was connected, allowing for peeloff events
to occur, which in turn caused wait_for_sndbuf to return -EPIPE which
was not caught by the logic that determines if an association should be
freed or not.

Fix it the easy way by returning the ordering of
sctp_primitive_ASSOCIATE and sctp_wait_for_sndbuf to the old order, to
ensure that EPIPE will not happen.

Tested by myself using the syzbot reproducers with positive results
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
CC: davem@davemloft.net
CC: Xin Long <lucien.xin@gmail.com>
Reported-by: syzbot+a4e4112c3aff00c8cfd8@syzkaller.appspotmail.com
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

skb_copy_expand without __GFP_NOWARN already does a dump_stack
on OOM so these messages are redundant.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jeff Kirsher says:

====================
40GbE Intel Wired LAN Driver Updates 2018-03-14

This series contains updates to i40e and i40evf only.

Corentin Labbe cleans up the left over FCoE files in the i40e driver.

Gustavo A R Silva fixes a cut and paste error.

Paweł fixes a race condition when the VF driver is loaded on a host and
virsh is trying to attach it to the virtual machine and set a MAC
address.  Resolve the issue by adding polling in i40e_ndo_set_vf_mac()
when the VF is in reset mode.

Jake cleans up i40e_vlan_rx_register() since this only used in a single
location, so just inline the contents of the function.  Created a helper
function to proper update the per-filter statistics when we delete it.
Factored out the re-enabling ATR and SB rules.  Fixed an issue when
re-enabling ATR after the last TCPv4 filter is removed and ntuple is
still active, we were not restoring the TCPv4 filter input set.

Filip modifies the permission check function to ensure that it knows how
many filters are being requested, which allows the check to ensure that
the total number of filters in a single request does not cause us to go
over the limit.

Mariusz fixed an issue where the wrong calculation of partition id was
being done on OCP PHY mezzanine cards, which in turn caused wake on LAN
to be disabled on certain ports.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

When we re-enable ATR we need to restore the input set for TCPv4
filters, in order for ATR to function correctly. We already do this for
the normal case of re-enabling ATR when disabling ntuple support.
However, when re-enabling ATR after the last TCPv4 filter is removed (but
when ntuple support is still active), we did not restore the TCPv4
filter input set.

This can cause problems if the TCPv4 filters from FDir had changed the
input set, as ATR will no longer behave as expected.

When clearing the ATR auto-disable flag, make sure we restore the TCPv4
input set to avoid this.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch overwrites number of ports for X722 devices with support
for OCP PHY mezzanine.
The old method with checking if port is disabled in the PRTGEN_CNF
register cannot be used in this case. When the OCP is removed, ports
were seen as disabled, which resulted in wrong calculation of partition
id, that caused WoL to be disabled on certain ports.
Signed-off-by: Mariusz Stachura <mariusz.stachura@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

A future patch needs to expand on the logic for re-enabling ATR. Doing
so would cause some code to break the 80-character line limit.

To reduce the level of indentation, factor out helper functions for
re-enabling ATR and SB rules.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

When hardware has trouble with a particular filter, we delete it from
the list. Unfortunately, we did not properly update the per-filter
statistic when doing so.

Create a helper function to handle this, and properly reduce the
necessary counter so that it tracks the number of active filters
properly.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

When VF requests adding of MAC filters the checking is done against number
of already present MAC filters not adding them at the same time. It makes
it possible to add a bunch of filters at once possibly exceeding
acceptable limit of I40E_VC_MAX_MAC_ADDR_PER_VF filters.

This happens because when checking vf->num_mac, we do not check how many
filters are being requested at once. Modify the check function to ensure
that it knows how many filters are being requested. This allows the
check to ensure that the total number of filters in a single request
does not cause us to go over the limit.

Additionally, move the check to within the lock to ensure that the
vf->num_mac is checked while holding the lock to maintain consistency.
We could have simply moved the call to i40e_vf_check_permission to
within the loop, but this could cause a request to be non-atomic, and
add some but not all the addresses, while reporting an error code. We
want to avoid this behavior so that users are not confused about which
filters have or have not been added.
Signed-off-by: Filip Sadowski <filip.sadowski@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

We used to use the function i40e_vlan_rx_register as a way to hook
into the now defunct .ndo_vlan_rx_register netdev hook. This was
removed but we kept the function around because we still used it
internally to control enabling or disabling of VLAN stripping.

As pointed out in upstream review, VLAN stripping is only used in a
single location and the previous function is quite small, just inline
it into i40e_restore_vlan() rather than carrying the function
separately.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Fix for "Resource temporarily unavailable" problem when virsh is
trying to attach a device to VM. When the VF driver is loaded on
host and virsh is trying to attach it to the VM and set a MAC
address, it ends with a race condition between i40e_reset_vf and
i40e_ndo_set_vf_mac functions. The bug is fixed by adding polling
in i40e_ndo_set_vf_mac function For when the VF is in Reset mode.
Signed-off-by: Paweł Jabłoński <pawel.jablonski@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

It seems this is a copy-paste error and that the proper variable to use
in this particular case is _src_ instead of _dst_.

Addresses-Coverity-ID: 1465282 ("Copy-paste error")
Fixes: 0075fa0f ("i40evf: Add support to apply cloud filters")
Signed-off-by: Gustavo A R Silva <garsilva@embeddedor.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

i40e_fcoe support was removed via commit 9eed69a9 ("i40e: Drop FCoE code from core driver files")
But this left files in place but un-compilable.
Let's finish the cleaning.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Xin Long says:

====================
sctp: add support for some sctp auth APIs from RFC6458

This patchset mainly adds support for SCTP AUTH Information for sendmsg,
described in RFC6458:

    5.3.8.  SCTP AUTH Information Structure (SCTP_AUTHINFO)

and also adds a sockopt described in RFC6458:

    8.3.4.  Deactivate a Shared Key (SCTP_AUTH_DEACTIVATE_KEY)

and two types of events for AUTHENTICATION_EVENT described in RFC6458:

    6.1.8.  SCTP_AUTHENTICATION_EVENT:
             - SCTP_AUTH_NO_AUTH
             - SCTP_AUTH_FREE_KEY

After this patchset, we have fully support for sctp_sendv in kernel.

Note that this patchset won't touch that sctp options merge conflict.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch is to add SCTP_AUTH_NO_AUTH type for AUTHENTICATION_EVENT,
as described in section 6.1.8 of RFC6458.

      SCTP_AUTH_NO_AUTH:  This report indicates that the peer does not
         support SCTP authentication as defined in [RFC4895].

Note that the implementation is quite similar as that of
SCTP_ADAPTATION_INDICATION.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch is to add SCTP_AUTH_FREE_KEY type for AUTHENTICATION_EVENT,
as described in section 6.1.8 of RFC6458.

      SCTP_AUTH_FREE_KEY:  This report indicates that the SCTP
         implementation will no longer use the key identifier specified
         in auth_keynumber.

After deactivating a key, it would never be used again, which means
it's refcnt can't be held/increased by new chunks. But there may be
some chunks in out queue still using it. So only when refcnt is 1,
which means no chunk in outqueue is using/holding this key either,
this EVENT would be sent.

When users receive this notification, they could do DEL_KEY sockopt to
remove this shkey, and also tell the peer that this key won't be used
in any chunk thoroughly from now on, then the peer can remove it as
well safely.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch is to add sockopt SCTP_AUTH_DEACTIVATE_KEY, as described in
section 8.3.4 of RFC6458.

This set option indicates that the application will no longer send user
messages using the indicated key identifier.

Note that RFC requires that only deactivated keys that are no longer used
by an association can be deleted, but for the backward compatibility, it
is not to check deactivated when deleting or replacing one sh_key.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch is to add support for SCTP AUTH Information for sendmsg,
as described in section 5.3.8 of RFC6458.

With this option, you can provide shared key identifier used for
sending the user message.

It's also a necessary send info for sctp_sendv.

Note that it reuses sinfo->sinfo_tsn to indicate if this option is
set and sinfo->sinfo_ssn to save the shkey ID which can be 0.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

With refcnt support for sh_key, chunks auth sh_keys can be decided
before enqueuing it. Changing the active key later will not affect
the chunks already enqueued.

Furthermore, this is necessary when adding the support for authinfo
for sendmsg in next patch.

Note that struct sctp_chunk can't be grown due to that performance
drop issue on slow cpu, so it just reuses head_skb memory for shkey
in sctp_chunk.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Ursula Braun says:

====================
net/smc: fixes 2018-03-14

here are smc changes for the net-next tree.
The first patch enables SMC to work with mlx5-RoCE-devices.
Patches 2 and 3 deal with link group freeing.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The free_work worker must be scheduled when the link group is
abnormally terminated.
Signed-off-by: Karsten Graul <kgraul@linux.vnet.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Make sure there is no pending or running free_work worker for the link
group when freeing the link group.
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

smc allocates a certain number of CQ entries for used RoCE devices. For
mlx5 devices the chosen constant number results in a large allocation
causing this warning:

[13355.124656] WARNING: CPU: 3 PID: 16535 at mm/page_alloc.c:3883 __alloc_pages_nodemask+0x2be/0x10c0
[13355.124657] Modules linked in: smc_diag(O) smc(O) xt_CHECKSUM iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ipt_REJECT nf_reject_ipv4 xt_tcpudp bridge stp llc ip6table_filter ip6_tables iptable_filter mlx5_ib ib_core sunrpc mlx5_core s390_trng rng_core ghash_s390 prng aes_s390 des_s390 des_generic sha512_s390 sha256_s390 sha1_s390 sha_common ptp pps_core eadm_sch dm_multipath dm_mod vhost_net tun vhost tap sch_fq_codel kvm ip_tables x_tables autofs4 [last unloaded: smc]
[13355.124672] CPU: 3 PID: 16535 Comm: kworker/3:0 Tainted: G           O    4.14.0uschi #1
[13355.124673] Hardware name: IBM 3906 M04 704 (LPAR)
[13355.124675] Workqueue: events smc_listen_work [smc]
[13355.124677] task: 00000000e2f22100 task.stack: 0000000084720000
[13355.124678] Krnl PSW : 0704c00180000000 000000000029da76 (__alloc_pages_nodemask+0x2be/0x10c0)
[13355.124681]            R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:0 PM:0 RI:0 EA:3
[13355.124682] Krnl GPRS: 0000000000000000 00550e00014080c0 0000000000000000 0000000000000001
[13355.124684]            000000000029d8b6 00000000f3bfd710 0000000000000000 00000000014080c0
[13355.124685]            0000000000000009 00000000ec277a00 0000000000200000 0000000000000000
[13355.124686]            0000000000000000 00000000000001ff 000000000029d8b6 0000000084723720
[13355.124708] Krnl Code: 000000000029da6a: a7110200		tmll	%r1,512
                          000000000029da6e: a774ff29		brc	7,29d8c0
                         #000000000029da72: a7f40001		brc	15,29da74
                         >000000000029da76: a7f4ff25		brc	15,29d8c0
                          000000000029da7a: a7380000		lhi	%r3,0
                          000000000029da7e: a7f4fef1		brc	15,29d860
                          000000000029da82: 5820f0c4		l	%r2,196(%r15)
                          000000000029da86: a53e0048		llilh	%r3,72
[13355.124720] Call Trace:
[13355.124722] ([<000000000029d8b6>] __alloc_pages_nodemask+0xfe/0x10c0)
[13355.124724]  [<000000000013bd1e>] s390_dma_alloc+0x6e/0x148
[13355.124733]  [<000003ff802eeba6>] mlx5_dma_zalloc_coherent_node+0x8e/0xe0 [mlx5_core]
[13355.124740]  [<000003ff802eee18>] mlx5_buf_alloc_node+0x70/0x108 [mlx5_core]
[13355.124744]  [<000003ff804eb410>] mlx5_ib_create_cq+0x558/0x898 [mlx5_ib]
[13355.124749]  [<000003ff80407d40>] ib_create_cq+0x48/0x88 [ib_core]
[13355.124751]  [<000003ff80109fba>] smc_ib_setup_per_ibdev+0x52/0x118 [smc]
[13355.124753]  [<000003ff8010bcb6>] smc_conn_create+0x65e/0x728 [smc]
[13355.124755]  [<000003ff801081a2>] smc_listen_work+0x2d2/0x540 [smc]
[13355.124756]  [<0000000000162c66>] process_one_work+0x1be/0x440
[13355.124758]  [<0000000000162f40>] worker_thread+0x58/0x458
[13355.124759]  [<0000000000169e7e>] kthread+0x14e/0x168
[13355.124760]  [<00000000009ce8be>] kernel_thread_starter+0x6/0xc
[13355.124762]  [<00000000009ce8b8>] kernel_thread_starter+0x0/0xc
[13355.124762] Last Breaking-Event-Address:
[13355.124764]  [<000000000029da72>] __alloc_pages_nodemask+0x2ba/0x10c0
[13355.124764] ---[ end trace 34be38b581c0b585 ]---

This patch reduces the smc constant for the maximum number of allocated
completion queue entries SMC_MAX_CQE by 2 to avoid high round up values
in the mlx5 code, and reduces the number of allocated completion queue
entries even more, if the final allocation for an mlx5 device hits the
MAX_ORDER limit.
Reported-by: Ihnken Menssen <menssen@de.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Added ethtool changes to show port type as TP (Twisted Pair) for
10GBASE-T ports. Same driver and firmware works for liquidio NIC with
SFP+ ports or TP ports.
Signed-off-by: Veerasenareddy Burru <veerasenareddy.burru@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Now we have ndo_xdp_xmit, switch to use it instead of the slow generic
XDP TX routine. XDP_TX on TAP gets ~20% improvements from ~1.5Mpps to
~1.8Mpps on 2.60GHz Core(TM) i7-5600U.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Edward Cree says:

====================
sfc: support FEC configuration

Implements the ethtool get & set fecparam operations.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

As well as 'auto' and the forced 'off', 'rs' and 'baser' states, we also
 handle combinations of settings (since the fecparam->fec field is a
 bitmask), where auto|rs and auto|baser specify a preferred FEC mode but
 will fall back to the other if the cable or link partner doesn't support
 it.  rs|baser (with or without auto bit) means prefer FEC even where
 auto wouldn't use it, but let FW choose which encoding to use.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The case in which we handle a reset from the state where the device is
closed seems to be bugged for all types of reset. For most types of reset
we currently exit the reset routine correctly, but don't set the state to
indicate that we are back in the "closed" state. For some specific cases,
we don't exit the reset routine at all and resetting will cause a closed
device to be opened.

This patch fixes the problem by unconditionally checking the reset_state
and correctly setting the adapter state before returning.
Signed-off-by: John Allen <jallen@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Socket option SO_ZEROCOPY determines whether the kernel ignores or
processes flag MSG_ZEROCOPY on subsequent send calls. This to avoid
changing behavior for legacy processes.

Limiting the state change to closed sockets is annoying with passive
sockets and not necessary for correctness. Once created, zerocopy skbs
are processed based on their private state, not this socket flag.

Remove the constraint.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

_buf_ is an array and the one that must be freed is _tp_ instead.

Fixes: a870a02c ("pktgen: use dynamic allocation for debug print buffer")
Reported-by: Wang Jian <jianjian.wang1@gmail.com>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

After the removal of the VLA, we get a harmless warning about a large
stack frame:

net/core/pktgen.c: In function 'pktgen_if_write':
net/core/pktgen.c:1710:1: error: the frame size of 1076 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]

The function was previously shown to be safe despite hitting
the 1024 bye warning level. To get rid of the annoyging warning,
while keeping it readable, this changes it to use strndup_user().

Obviously this is not a fast path, so the kmalloc() overhead
can be disregarded.

Fixes: 35951393 ("pktgen: Remove VLA usage")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

The new variable is only available when CONFIG_SYSCTL is enabled,
otherwise we get a link error:

net/ipv4/ip_tunnel.o: In function `ip_tunnel_init_net':
ip_tunnel.c:(.text+0x278b): undefined reference to `sysctl_fb_tunnels_only_for_init_net'
net/ipv6/sit.o: In function `sit_init_net':
sit.c:(.init.text+0x4c): undefined reference to `sysctl_fb_tunnels_only_for_init_net'
net/ipv6/ip6_tunnel.o: In function `ip6_tnl_init_net':
ip6_tunnel.c:(.init.text+0x39): undefined reference to `sysctl_fb_tunnels_only_for_init_net'

This adds an extra condition, keeping the traditional behavior when
CONFIG_SYSCTL is disabled.

Fixes: 79134e6c ("net: do not create fallback tunnels for non-default namespaces")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Make locking scheme be visible for users, and provide
a comment what for we are need exit_batch() methods,
and when it should be used.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

HMA(Host Memory Access) maps a part of host memory for T6-SO memfree cards.

This commit does the following:
- Query FW to check if we have HMA support. If yes, the params will
  return HMA size configured in FW. We will dma map memory based
  on this size.
- Also contains changes to get HMA memory information via debugfs.
Signed-off-by: Arjun Vynipadath <arjun@chelsio.com>
Signed-off-by: Santosh Rastapur <santosh@chelsio.com>
Signed-off-by: Michael Werner <werner@chelsio.com>
Signed-off-by: Ganesh GR <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Kirill Tkhai says:

====================
Converting pernet_operations (part #6)

this series continues to review and to convert pernet_operations
to make them possible to be executed in parallel for several
net namespaces in the same time. There are sctp, tipc and rds
in this series.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

These pernet_operations create and destroy sysctl table
and listen socket. Also, exit method flushes global
workqueue and work. Everything looks per-net safe,
so we can mark them async.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>