- 14 Oct, 2020 40 commits
-
-
Hui Su authored
Fix the comment of find_vm_area() and get_vm_area() Signed-off-by:
Hui Su <sh_def@163.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Reviewed-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Hui Su authored
Since c67dc624 ("mm/vmalloc: do not call kmemleak_free() on not yet accounted memory"), the __vunmap() have been changed to __vfree(), so update the confusing comment(). Signed-off-by:
-
Alex Shi authored
Unlike others we don't use the marco writeback. so let's remove it to tame gcc warning: mm/memory-failure.c:827: warning: macro "writeback" is not used [-Wunused-macros] Signed-off-by:
Alex Shi <alex.shi@linux.alibaba.com> Signed-off-by:
-
Xianting Tian authored
There is no need to calculate pgoff in each loop of for_each_process(), so move it to the place before for_each_process(), which can save some CPU cycles. Signed-off-by:
Xianting Tian <tian.xianting@h3c.com> Signed-off-by:
Naoya Horiguchi <naoya.horiguchi@nec.com> Link: http://lkml.kernel.org/r/20200818082647.34322-1-tian.xianting@h3c.comSigned-off-by:
-
Andy Shevchenko authored
No need to hard code function name when __func__ can be used. While here, replace specifiers for special types like dma_addr_t. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Andy Shevchenko authored
There is a place in the code where open-coded version of list_for_each_entry_safe() is used. Replace that with the standard macro. Signed-off-by:
-
Ralph Campbell authored
The variable dmirror_zero_page is unused in the HMM self test driver which was probably intended to demonstrate how a driver could use migrate_vma_setup() to share a single read-only device private zero page similar to how the CPU does. However, this isn't needed for the self tests so remove it. Signed-off-by:
Ralph Campbell <rcampbell@nvidia.com> Signed-off-by:
-
Ralph Campbell authored
Some tests might not be able to be run if resources like huge pages are not available. Mark these tests as skipped instead of simply passing. Signed-off-by:
Jason Gunthorpe <jgg@nvidia.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Shuah Khan <shuah@kernel.org> Link: http://lkml.kernel.org/r/20200827190400.12608-1-rcampbell@nvidia.comSigned-off-by:
-
yuleixzhang authored
As mincore_huge_pmd() was dropped, remove the declaration from the header file. Signed-off-by:
Yulei Zhang <yuleixzhang@tencent.com> Signed-off-by:
Zi Yan <ziy@nvidia.com> Link: https://lkml.kernel.org/r/20200922083423.15074-1-yuleixzhang@tencent.comSigned-off-by:
-
Peter Xu authored
Both of the mm pointers are not needed after commit 7a4830c3 ("mm/fork: Pass new vma pointer into copy_page_range()"). Jason Gunthorpe also reported that the ordering of copy_page_range() is odd. Since working at it, reorder the parameters to be logical, by (1) always put the dst_* fields to be before src_* fields, and (2) keep the same type of parameters together. [peterx@redhat.com: further reorder some parameters and line format, per Jason] Link: https://lkml.kernel.org/r/20201002192647.7161-1-peterx@redhat.com [peterx@redhat.com: fix warnings] Link: https://lkml.kernel.org/r/20201006200138.GA6026@xz-x1Reported-by:
Kirill A. Shutemov <kirill@shutemov.name> Signed-off-by:
Peter Xu <peterx@redhat.com> Signed-off-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Link: https://lkml.kernel.org/r/20200930204950.6668-1-peterx@redhat.comSigned-off-by:
-
Liao Pingfang authored
Replace do_brk with do_brk_flags in comment of insert_vm_struct(), since do_brk was removed in following commit. Fixes: bb177a73 ("mm: do not bug_on on incorrect length in __mm_populate()") Signed-off-by:
Liao Pingfang <liao.pingfang@zte.com.cn> Signed-off-by:
Yi Wang <wang.yi59@zte.com.cn> Signed-off-by:
-
Miaohe Lin authored
In commit 1da177e4 ("Linux-2.6.12-rc2"), the helper allow_write_access came with the atomic_inc operation of the i_writecount field in the func __remove_shared_vm_struct(). But it forgot to use this helper function. Signed-off-by:
Miaohe Lin <linmiaohe@huawei.com> Signed-off-by:
-
Miaohe Lin authored
Commit 4bb5f5d9 ("mm: allow drivers to prevent new writable mappings") changed i_mmap_writable from unsigned int to atomic_t and add the helper function mapping_allow_writable() to atomic_inc i_mmap_writable. But it forgot to use this helper function in dup_mmap() and __vma_link_file(). Signed-off-by:
-
Wei Yang authored
In __vma_adjust(), we do the check on *root* to decide whether to adjust the address_space. It seems to be more meaningful to do the check on *file* itself. This means we are adjusting some data because it is a file backed vma. Since we seem to assume the address_space is valid if it is a file backed vma, let's just replace *root* with *file* here. Signed-off-by:
Wei Yang <richard.weiyang@linux.alibaba.com> Signed-off-by:
-
Wei Yang authored
*root* with type of struct rb_root_cached is an element of *mapping* with type of struct address_space. This implies when we have a valid *root* it must be a part of valid *mapping*. So we can merge these two checks together to make the code more easy to read and to save some cpu cycles. Signed-off-by:
-
Randy Dunlap authored
Fix typo/spello of "function". Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
-
Wei Yang authored
Instead of converting adjust_next between bytes and pages number, let's just store the virtual address into adjust_next. Also, this patch fixes one typo in the comment of vma_adjust_trans_huge(). [vbabka@suse.cz: changelog tweak] Signed-off-by:
Vlastimil Babka <vbabka@suse.cz> Cc: Mike Kravetz <mike.kravetz@oracle.com> Link: http://lkml.kernel.org/r/20200828081031.11306-1-richard.weiyang@linux.alibaba.comSigned-off-by:
-
Matthew Wilcox (Oracle) authored
Introduce the new page policy of PF_SECOND which lets us use the normal pageflags generation machinery to create the various DoubleMap manipulation functions. Signed-off-by:
Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by:
-
Matthew Wilcox (Oracle) authored
Patch series "Fix PageDoubleMap". This is a purely theoretical problem for now as none of the filesystems which use PG_private_2 (ie PG_fscache) are being converted at this time, but it's confusing to leave it like this. This patch (of 2): PG_private_2 is defined as being PF_ANY (applicable to tail pages as well as regular & head pages). That means that the first tail page of a double-map page will appear to have Private2 set. Use the Workingset bit instead which is defined as PF_HEAD so any attempt to access the Workingset bit on a tail page will redirect to the head page's Workingset bit. Signed-off-by:
-
Chinwen Chang authored
smaps_rollup will try to grab mmap_lock and go through the whole vma list until it finishes the iterating. When encountering large processes, the mmap_lock will be held for a longer time, which may block other write requests like mmap and munmap from progressing smoothly. There are upcoming mmap_lock optimizations like range-based locks, but the lock applied to smaps_rollup would be the coarse type, which doesn't avoid the occurrence of unpleasant contention. To solve aforementioned issue, we add a check which detects whether anyone wants to grab mmap_lock for write attempts. Signed-off-by:
Chinwen Chang <chinwen.chang@mediatek.com> Signed-off-by:
-
Chinwen Chang authored
Extend smap_gather_stats to support indicated beginning address at which it should start gathering. To achieve the goal, we add a new parameter @start assigned by the caller and try to refactor it for simplicity. If @start is 0, it will use the range of @vma for gathering. Signed-off-by:
Steven Price <steven.price@arm.com> Cc: Michel Lespinasse <walken@google.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Daniel Kiss <daniel.kiss@arm.com> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: Huang Ying <ying.huang@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jimmy Assarsson <jimmyassarsson@gmail.com> Cc: Laurent Dufour <ldufour@linux.ibm.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Song Liu <songliubraving@fb.com> Cc: Vlastimil Babka <vbabka@suse.cz> Link: http://lkml.kernel.org/r/1597715898-3854-3-git-send-email-chinwen.chang@mediatek.comSigned-off-by:
-
Chinwen Chang authored
Patch series "Try to release mmap_lock temporarily in smaps_rollup", v4. Recently, we have observed some janky issues caused by unpleasantly long contention on mmap_lock which is held by smaps_rollup when probing large processes. To address the problem, we let smaps_rollup detect if anyone wants to acquire mmap_lock for write attempts. If yes, just release the lock temporarily to ease the contention. smaps_rollup is a procfs interface which allows users to summarize the process's memory usage without the overhead of seq_* calls. Android uses it to sample the memory usage of various processes to balance its memory pool sizes. If no one wants to take the lock for write requests, smaps_rollup with this patch will behave like the original one. Although there are on-going mmap_lock optimizations like range-based locks, the lock applied to smaps_rollup would be the coarse one, which is hard to avoid the occurrence of aforementioned issues. So the detection and temporary release for write attempts on mmap_lock in smaps_rollup is still necessary. This patch (of 3): Add new API to query if someone wants to acquire mmap_lock for write attempts. Using this instead of rwsem_is_contended makes it more tolerant of future changes to the lock type. Signed-off-by:
Michel Lespinasse <walken@google.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Daniel Kiss <daniel.kiss@arm.com> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: Huang Ying <ying.huang@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jimmy Assarsson <jimmyassarsson@gmail.com> Cc: Laurent Dufour <ldufour@linux.ibm.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Song Liu <songliubraving@fb.com> Cc: Vlastimil Babka <vbabka@suse.cz> Link: http://lkml.kernel.org/r/1597715898-3854-1-git-send-email-chinwen.chang@mediatek.com Link: http://lkml.kernel.org/r/1597715898-3854-2-git-send-email-chinwen.chang@mediatek.comSigned-off-by:
-
Wei Yang authored
These two functions share the same logic except ignore a different vma. Let's reuse the code. Signed-off-by:
-
Wei Yang authored
__vma_unlink_common() and __vma_unlink() are counterparts. Since there is no function named __vma_unlink(), let's rename __vma_unlink_common() to __vma_unlink() to make the code more self-explanatory and easy for audience to understand. Otherwise we may expect there are several variants of vma_unlink() and __vma_unlink_common() is used by them. Signed-off-by:
-
Yanfei Xu authored
The code has declared a vma_struct named vma which is assigned a value of vmf->vma. Thus, use variable vma directly here. Signed-off-by:
Yanfei Xu <yanfei.xu@windriver.com> Signed-off-by:
-
Yanfei Xu authored
It's "pte_alloc_one", not "pte_alloc_pne". Let's fix that. Signed-off-by:
David Hildenbrand <david@redhat.com> Link: http://lkml.kernel.org/r/20200818104339.5310-1-yanfei.xu@windriver.comSigned-off-by:
-
Matthew Wilcox authored
We account the PTE level of the page tables to the process in order to make smarter OOM decisions and help diagnose why memory is fragmented. For these same reasons, we should account pages allocated for PMDs. With larger process address spaces and ASLR, the number of PMDs in use is higher than it used to be so the inaccuracy is starting to matter. [rppt@linux.ibm.com: arm: __pmd_free_tlb(): call page table destructor] Link: https://lkml.kernel.org/r/20200825111303.GB69694@linux.ibm.comSigned-off-by:
Mike Rapoport <rppt@linux.ibm.com> Cc: Abdul Haleem <abdhalee@linux.vnet.ibm.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Joerg Roedel <joro@8bytes.org> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com> Cc: Stafford Horne <shorne@gmail.com> Cc: Naresh Kamboju <naresh.kamboju@linaro.org> Cc: Anders Roxell <anders.roxell@linaro.org> Link: http://lkml.kernel.org/r/20200627184642.GF25039@casper.infradead.orgSigned-off-by:
-
John Hubbard authored
Avoid accidental wrong builds, due to built-in rules working just a little bit too well--but not quite as well as required for our situation here. In other words, "make userfaultfd" (for example) is supposed to fail to build at all, because this Makefile only supports either "make" (all), or "make /full/path". However, the built-in rules, if not suppressed, will pick up CFLAGS and the initial LDLIBS (but not the target-specific LDLIBS, because those are only set for the full path target!). This causes it to get pretty far into building things despite using incorrect values such as an *occasionally* incomplete LDLIBS value. Signed-off-by:
John Hubbard <jhubbard@nvidia.com> Signed-off-by:
-
John Hubbard authored
Patch series "selftests/vm: fix some minor aggravating factors in the Makefile". This fixes a couple of minor aggravating factors that I ran across while trying to do some changes in selftests/vm. These are simple things, but like most things with GNU Make, it's rarely obvious what's wrong until you understand *the entire Makefile and all of its includes*. So while there is, of course, joy in learning those details, I thought I'd fix these little things, so as to allow others to skip out on the Joy if they so choose. :) First of all, if you have an item (let's choose userfaultfd for an example) that fails to build, you might do this: $ make -j32 # ...you observe a failed item in the threaded output # OK, let's get a closer look $ make # ...but now the build quietly "succeeds". That's what Patch 0001 fixes. Second, if you instead attempt this approach for your closer look (a casual mistake, as it's not supported): $ make userfaultfd # ...userfaultfd fails to link, due to incomplete LDLIBS That's what Patch 0002 fixes. This patch (of 2): If one or more of these selftest fail to build, then after the first failure, subsequent invocations of "make" will make it appear that there are no build failures, after all. That's because the failed build products remain, with up-to-date timestamps, thus tricking Make (and you!) into believing that there's nothing else to build. Fix this by telling Make to delete targets that didn't completely succeed. Signed-off-by: -
Ralph Campbell authored
The code in mc_handle_swap_pte() checks for non_swap_entry() and returns NULL before checking is_device_private_entry() so device private pages are never handled. Fix this by checking for non_swap_entry() after handling device private swap PTEs. I assume the memory cgroup accounting would be off somehow when moving a process to another memory cgroup. Currently, the device private page is charged like a normal anonymous page when allocated and is uncharged when the page is freed so I think that path is OK. Signed-off-by:
Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Ira Weiny <ira.weiny@intel.com> Link: https://lkml.kernel.org/r/20201009215952.2726-1-rcampbell@nvidia.com xFixes: c733a828 ("mm/memcontrol: support MEMORY_DEVICE_PRIVATE") Signed-off-by:
-
Bharata B Rao authored
Object cgroup charging is done for all the objects during allocation, but during freeing, uncharging ends up happening for only one object in the case of bulk allocation/freeing. Fix this by having a separate call to uncharge all the objects from kmem_cache_free_bulk() and by modifying memcg_slab_free_hook() to take care of bulk uncharging. Fixes: 964d4bd3 ("mm: memcg/slab: save obj_cgroup for non-root slab objects" Signed-off-by:
Bharata B Rao <bharata@linux.ibm.com> Signed-off-by:
Roman Gushchin <guro@fb.com> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Shakeel Butt <shakeelb@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20201009060423.390479-1-bharata@linux.ibm.comSigned-off-by:
-
Miaohe Lin authored
Since commit 79dfdacc ("memcg: make oom_lock 0 and 1 based rather than counter"), the mem_cgroup_unmark_under_oom() is added and the comment of the mem_cgroup_oom_unlock() is moved here. But this comment make no sense here because mem_cgroup_oom_lock() does not operate on under_oom field. So we reword the comment as this would be helpful. [Thanks Michal Hocko for rewording this comment.] Signed-off-by:
Michal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Link: https://lkml.kernel.org/r/20200930095336.21323-1-linmiaohe@huawei.comSigned-off-by:
-
Miaohe Lin authored
Since commit bbec2e15 ("mm: rename page_counter's count/limit into usage/max"), page_counter_limit() is renamed to page_counter_set_max(). So replace page_counter_limit with page_counter_set_max in comment. Signed-off-by:
-
Muchun Song authored
In the cgroup v1, we have a numa_stat interface. This is useful for providing visibility into the numa locality information within an memcg since the pages are allowed to be allocated from any physical node. One of the use cases is evaluating application performance by combining this information with the application's CPU allocation. But the cgroup v2 does not. So this patch adds the missing information. Suggested-by:
Shakeel Butt <shakeelb@google.com> Signed-off-by:
Muchun Song <songmuchun@bytedance.com> Signed-off-by:
-
Waiman Long authored
The swap page counter is v2 only while memsw is v1 only. As v1 and v2 controllers cannot be active at the same time, there is no point to keep both swap and memsw page counters in mem_cgroup. The previous patch has made sure that memsw page counter is updated and accessed only when in v1 code paths. So it is now safe to alias the v1 memsw page counter to v2 swap page counter. This saves 14 long's in the size of mem_cgroup. This is a saving of 112 bytes for 64-bit archs. While at it, also document which page counters are used in v1 and/or v2. Signed-off-by:
Waiman Long <longman@redhat.com> Signed-off-by:
-
Waiman Long authored
mem_cgroup_get_max() used to get memory+swap max from both the v1 memsw and v2 memory+swap page counters & return the maximum of these 2 values. This is redundant and it is more efficient to just get either the v1 or the v2 values depending on which one is currently in use. [longman@redhat.com: v4] Link: https://lkml.kernel.org/r/20200914150928.7841-1-longman@redhat.comSigned-off-by:
-
Waiman Long authored
Patch series "mm/memcg: Miscellaneous cleanups and streamlining", v2. This patch (of 3): Since commit 0a31bc97 ("mm: memcontrol: rewrite uncharge API") and commit 00501b53 ("mm: memcontrol: rewrite charge API") in v3.17, the enum charge_type was no longer used anywhere. However, the enum itself was not removed at that time. Remove the obsolete enum charge_type now. Signed-off-by:
Chris Down <chris@chrisdown.name> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Tejun Heo <tj@kernel.org> Cc: Roman Gushchin <guro@fb.com> Cc: Yafang Shao <laoar.shao@gmail.com> Link: https://lkml.kernel.org/r/20200914024452.19167-1-longman@redhat.com Link: https://lkml.kernel.org/r/20200914024452.19167-2-longman@redhat.comSigned-off-by:
-
Miaohe Lin authored
Since commit bbec2e15 ("mm: rename page_counter's count/limit into usage/max"), the arg @reclaim has no priority field anymore. Signed-off-by:
-
Roman Gushchin authored
mem_cgroup_from_obj() checks the lowest bit of the page->mem_cgroup pointer to determine if the page has an attached obj_cgroup vector instead of a regular memcg pointer. If it's not set, it simple returns the page->mem_cgroup value as a struct mem_cgroup pointer. The commit 10befea9 ("mm: memcg/slab: use a single set of kmem_caches for all allocations") changed the moment when this bit is set: if previously it was set on the allocation of the slab page, now it can be set well after, when the first accounted object is allocated on this page. It opened a race: if page->mem_cgroup is set concurrently after the first page_has_obj_cgroups(page) check, a pointer to the obj_cgroups array can be returned as a memory cgroup pointer. A simple check for page->mem_cgroup pointer for NULL before the page_has_obj_cgroups() check fixes the race. Indeed, if the pointer is not NULL, it's either a simple mem_cgroup pointer or a pointer to obj_cgroup vector. The pointer can be asynchronously changed from NULL to (obj_cgroup_vec | 0x1UL), but can't be changed from a valid memcg pointer to objcg vector or back. If the object passed to mem_cgroup_from_obj() is a slab object and page->mem_cgroup is NULL, it means that the object is not accounted, so the function must return NULL. I've discovered the race looking at the code, so far I haven't seen it in the wild. Fixes: 10befea9 ("mm: memcg/slab: use a single set of kmem_caches for all allocations") Signed-off-by:
-
Gustavo A. R. Silva authored
Use the preferred form for passing the size of a structure type. The alternative form where the structure type is spelled out hurts readability and introduces an opportunity for a bug when the object type is changed but the corresponding object identifier to which the sizeof operator is applied is not. Signed-off-by:
Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by:
-
