As one of the arguments of the H_ENTER_NESTED hypercall, the nested
hypervisor (L1) prepares a structure containing the values of various
hypervisor-privileged registers with which it wants the nested guest
(L2) to run. Since the nested HV runs in supervisor mode it needs the
host to write to these registers.

To stop a nested HV manipulating this mechanism and using a nested
guest as a proxy to access a facility that has been made unavailable
to it, we have a routine that sanitises the values of the HV registers
before copying them into the nested guest's vcpu struct.

However, when coming out of the guest the values are copied as they
were back into L1 memory, which means that any sanitisation we did
during guest entry will be exposed to L1 after H_ENTER_NESTED returns.

This patch alters this sanitisation to have effect on the vcpu->arch
registers directly before entering and after exiting the guest,
leaving the structure that is copied back into L1 unchanged (except
when we really want L1 to access the value, e.g the Cause bits of
HFSCR).
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Link: https://lore.kernel.org/r/20210811160134.904987-6-npiggin@gmail.com

Have the TM softpatch emulation code set up the HFAC interrupt and
return -1 in case an instruction was executed with HFSCR bits clear,
and have the interrupt exit handler fall through to the HFAC handler.
When the L0 is running a nested guest, this ensures the HFAC interrupt
is correctly passed up to the L1.

The "direct guest" exit handler will turn these into PROGILL program
interrupts so functionality in practice will be unchanged. But it's
possible an L1 would want to handle these in a different way.

Also rearrange the FAC interrupt emulation code to match the HFAC format
while here (mainly, adding the FSCR_INTR_CAUSE mask).
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210811160134.904987-5-npiggin@gmail.com

The softpatch interrupt sets HSRR0 to the faulting instruction +4, so
it should subtract 4 for the faulting instruction address in the case
it is a TM softpatch interrupt (the instruction was not executed) and
it was not emulated.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210811160134.904987-4-npiggin@gmail.com

TM fake-suspend emulation is only used by POWER9. Remove it from the old
code path.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210811160134.904987-3-npiggin@gmail.com

It is possible to create a VCPU without setting the MSR before running
it, which results in a warning in kvmhv_vcpu_entry_p9() that MSR_ME is
not set. This is pretty harmless because the MSR_ME bit is added to
HSRR1 before HRFID to guest, and a normal qemu guest doesn't hit it.

Initialise the vcpu MSR with MSR_ME set.
Reported-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210811160134.904987-2-npiggin@gmail.com

The book3s_64_mmu_radix.o object is not part of the KVM builtins and
all the callers of the exported symbols are in the same kvm-hv.ko
module so we should not need to export any symbols.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210805212616.2641017-4-farosas@linux.ibm.com

Both paths into __kvmhv_copy_tofrom_guest_radix ensure that we arrive
with an effective address that is smaller than our total addressable
space and addresses quadrant 0.

- The H_COPY_TOFROM_GUEST hypercall path rejects the call with
H_PARAMETER if the effective address has any of the twelve most
significant bits set.

- The kvmhv_copy_tofrom_guest_radix path clears the top twelve bits
before calling the internal function.

Although the callers make sure that the effective address is sane, any
future use of the function is exposed to a programming error, so add a
sanity check.
Suggested-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210805212616.2641017-3-farosas@linux.ibm.com

The __kvmhv_copy_tofrom_guest_radix function was introduced along with
nested HV guest support. It uses the platform's Radix MMU quadrants to
provide a nested hypervisor with fast access to its nested guests
memory (H_COPY_TOFROM_GUEST hypercall). It has also since been added
as a fast path for the kvmppc_ld/st routines which are used during
instruction emulation.

The commit def0bfdb ("powerpc: use probe_user_read() and
probe_user_write()") changed the low level copy function from
raw_copy_from_user to probe_user_read, which adds a check to
access_ok. In powerpc that is:

 static inline bool __access_ok(unsigned long addr, unsigned long size)
 {
         return addr < TASK_SIZE_MAX && size <= TASK_SIZE_MAX - addr;
 }

and TASK_SIZE_MAX is 0x0010000000000000UL for 64-bit, which means that
setting the two MSBs of the effective address (which correspond to the
quadrant) now cause access_ok to reject the access.

This was not caught earlier because the most common code path via
kvmppc_ld/st contains a fallback (kvm_read_guest) that is likely to
succeed for L1 guests. For nested guests there is no fallback.

Another issue is that probe_user_read (now __copy_from_user_nofault)
does not return the number of bytes not copied in case of failure, so
the destination memory is not being cleared anymore in
kvmhv_copy_from_guest_radix:

 ret = kvmhv_copy_tofrom_guest_radix(vcpu, eaddr, to, NULL, n);
 if (ret > 0)                            <-- always false!
         memset(to + (n - ret), 0, ret);

This patch fixes both issues by skipping access_ok and open-coding the
low level __copy_to/from_user_inatomic.

Fixes: def0bfdb ("powerpc: use probe_user_read() and probe_user_write()")
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210805212616.2641017-2-farosas@linux.ibm.com

Merge our fixes branch, which contains some fixes that didn't make it
into rc2 but which we'd like in next.

The H_ENTER_NESTED hypercall is handled by the L0, and it is a request
by the L1 to switch the context of the vCPU over to that of its L2
guest, and return with an interrupt indication. The L1 is responsible
for switching some registers to guest context, and the L0 switches
others (including all the hypervisor privileged state).

If the L2 MSR has TM active, then the L1 is responsible for
recheckpointing the L2 TM state. Then the L1 exits to L0 via the
H_ENTER_NESTED hcall, and the L0 saves the TM state as part of the exit,
and then it recheckpoints the TM state as part of the nested entry and
finally HRFIDs into the L2 with TM active MSR. Not efficient, but about
the simplest approach for something that's horrendously complicated.

Problems arise if the L1 exits to the L0 with a TM state which does not
match the L2 TM state being requested. For example if the L1 is
transactional but the L2 MSR is non-transactional, or vice versa. The
L0's HRFID can take a TM Bad Thing interrupt and crash.

Fix this by disallowing H_ENTER_NESTED in TM[T] state entirely, and then
ensuring that if the L1 is suspended then the L2 must have TM active,
and if the L1 is not suspended then the L2 must not have TM active.

Fixes: 360cae31 ("KVM: PPC: Book3S HV: Nested guest entry via hypercall")
Cc: stable@vger.kernel.org # v4.20+
Reported-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Acked-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

The kvmppc_rtas_hcall() sets the host rtas_args.rets pointer based on
the rtas_args.nargs that was provided by the guest. That guest nargs
value is not range checked, so the guest can cause the host rets pointer
to be pointed outside the args array. The individual rtas function
handlers check the nargs and nrets values to ensure they are correct,
but if they are not, the handlers store a -3 (0xfffffffd) failure
indication in rets[0] which corrupts host memory.

Fix this by testing up front whether the guest supplied nargs and nret
would exceed the array size, and fail the hcall directly without storing
a failure indication to rets[0].

Also expand on a comment about why we kill the guest and try not to
return errors directly if we have a valid rets[0] pointer.

Fixes: 8e591cb7 ("KVM: PPC: Book3S: Add infrastructure to implement kernel-side RTAS calls")
Cc: stable@vger.kernel.org # v3.10+
Reported-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Merge tag 'perf-tools-fixes-for-v5.14-2021-07-18' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull perf tools fixes from Arnaldo Carvalho de Melo:

 - Skip invalid hybrid PMU on hybrid systems when the atom (little) CPUs
   are offlined.

 - Fix 'perf test' problems related to the recently added hybrid
   (BIG/little) code.

 - Split ARM's coresight (hw tracing) decode by aux records to avoid
   fatal decoding errors.

 - Fix add event failure in 'perf probe' when running 32-bit perf in a
   64-bit kernel.

 - Fix 'perf sched record' failure when CONFIG_SCHEDSTATS is not set.

 - Fix memory and refcount leaks detected by ASAn when running 'perf
   test', should be clean of warnings now.

 - Remove broken definition of __LITTLE_ENDIAN from tools'
   linux/kconfig.h, which was breaking the build in some systems.

 - Cast PTHREAD_STACK_MIN to int as it may turn into 'long
   sysconf(__SC_THREAD_STACK_MIN_VALUE), breaking the build in some
   systems.

 - Fix libperf build error with LIBPFM4=1.

 - Sync UAPI files changed by the memfd_secret new syscall.

* tag 'perf-tools-fixes-for-v5.14-2021-07-18' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (35 commits)
  perf sched: Fix record failure when CONFIG_SCHEDSTATS is not set
  perf probe: Fix add event failure when running 32-bit perf in a 64-bit kernel
  perf data: Close all files in close_dir()
  perf probe-file: Delete namelist in del_events() on the error path
  perf test bpf: Free obj_buf
  perf trace: Free strings in trace__parse_events_option()
  perf trace: Free syscall tp fields in evsel->priv
  perf trace: Free syscall->arg_fmt
  perf trace: Free malloc'd trace fields on exit
  perf lzma: Close lzma stream on exit
  perf script: Fix memory 'threads' and 'cpus' leaks on exit
  perf script: Release zstd data
  perf session: Cleanup trace_event
  perf inject: Close inject.output on exit
  perf report: Free generated help strings for sort option
  perf env: Fix memory leak of cpu_pmu_caps
  perf test maps__merge_in: Fix memory leak of maps
  perf dso: Fix memory leak in dso__new_map()
  perf test event_update: Fix memory leak of unit
  perf test event_update: Fix memory leak of evlist
  ...

Pull xfs fixes from Darrick Wong:
 "A few fixes for issues in the new online shrink code, additional
  corrections for my recent bug-hunt w.r.t. extent size hints on
  realtime, and improved input checking of the GROWFSRT ioctl.

  IOW, the usual 'I somehow got bored during the merge window and
  resumed auditing the farther reaches of xfs':

   - Fix shrink eligibility checking when sparse inode clusters enabled

   - Reset '..' directory entries when unlinking directories to prevent
     verifier errors if fs is shrinked later

   - Don't report unusable extent size hints to FSGETXATTR

   - Don't warn when extent size hints are unusable because the sysadmin
     configured them that way

   - Fix insufficient parameter validation in GROWFSRT ioctl

   - Fix integer overflow when adding rt volumes to filesystem"

* tag 'xfs-5.14-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: detect misaligned rtinherit directory extent size hints
  xfs: fix an integer overflow error in xfs_growfs_rt
  xfs: improve FSGROWFSRT precondition checking
  xfs: don't expose misaligned extszinherit hints to userspace
  xfs: correct the narrative around misaligned rtinherit/extszinherit dirs
  xfs: reset child dir '..' entry when unlinking child
  xfs: check for sparse inode clusters that cross new EOAG when shrinking

Pull iomap fixes from Darrick Wong:
 "A handful of bugfixes for the iomap code.

  There's nothing especially exciting here, just fixes for UBSAN (not
  KASAN as I erroneously wrote in the tag message) warnings about
  undefined behavior in the SEEK_DATA/SEEK_HOLE code, and some
  reshuffling of per-page block state info to fix some problems with
  gfs2.

   - Fix KASAN warnings due to integer overflow in SEEK_DATA/SEEK_HOLE

   - Fix assertion errors when using inlinedata files on gfs2"

* tag 'iomap-5.14-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  iomap: Don't create iomap_page objects in iomap_page_mkwrite_actor
  iomap: Don't create iomap_page objects for inline files
  iomap: Permit pages without an iop to enter writeback
  iomap: remove the length variable in iomap_seek_hole
  iomap: remove the length variable in iomap_seek_data

Merge tag 'kbuild-fixes-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Restore the original behavior of scripts/setlocalversion when
   LOCALVERSION is set to empty.

 - Show Kconfig prompts even for 'make -s'

 - Fix the combination of COFNIG_LTO_CLANG=y and CONFIG_MODVERSIONS=y
   for older GNU Make versions

* tag 'kbuild-fixes-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  Documentation: Fix intiramfs script name
  Kbuild: lto: fix module versionings mismatch in GNU make 3.X
  kbuild: do not suppress Kconfig prompts for silent build
  scripts/setlocalversion: fix a bug when LOCALVERSION is empty

Documentation was not changed when renaming the script in commit
80e715a0 ("initramfs: rename gen_initramfs_list.sh to
gen_initramfs.sh"). Fixing this.

Basically does:

 $ sed -i -e s/gen_initramfs_list.sh/gen_initramfs.sh/g $(git grep -l gen_initramfs_list.sh)

Fixes: 80e715a0 ("initramfs: rename gen_initramfs_list.sh to gen_initramfs.sh")
Signed-off-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

When building modules(CONFIG_...=m), I found some of module versions
are incorrect and set to 0.
This can be found in build log for first clean build which shows

WARNING: EXPORT symbol "XXXX" [drivers/XXX/XXX.ko] version generation failed,
symbol will not be versioned.

But in second build(incremental build), the WARNING disappeared and the
module version becomes valid CRC and make someone who want to change
modules without updating kernel image can't insert their modules.

The problematic code is
+	$(foreach n, $(filter-out FORCE,$^),				\
+		$(if $(wildcard $(n).symversions),			\
+			; cat $(n).symversions >> $@.symversions))

For example:
  rm -f fs/notify/built-in.a.symversions    ; rm -f fs/notify/built-in.a; \
llvm-ar cDPrST fs/notify/built-in.a fs/notify/fsnotify.o \
fs/notify/notification.o fs/notify/group.o ...

`foreach n` shows nothing to `cat` into $(n).symversions because
`if $(wildcard $(n).symversions)` return nothing, but actually
they do exist during this line was executed.

-rw-r--r-- 1 root root 168580 Jun 13 19:10 fs/notify/fsnotify.o
-rw-r--r-- 1 root root    111 Jun 13 19:10 fs/notify/fsnotify.o.symversions

The reason is the $(n).symversions are generated at runtime, but
Makefile wildcard function expends and checks the file exist or not
during parsing the Makefile.

Thus fix this by use `test` shell command to check the file
existence in runtime.

Rebase from both:
1. [https://lore.kernel.org/lkml/20210616080252.32046-1-lecopzer.chen@mediatek.com/]
2. [https://lore.kernel.org/lkml/20210702032943.7865-1-lecopzer.chen@mediatek.com/]

Fixes: 38e89184 ("kbuild: lto: fix module versioning")
Co-developed-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Lecopzer Chen <lecopzer.chen@mediatek.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

When a new CONFIG option is available, Kbuild shows a prompt to get
the user input.

  $ make
  [ snip ]
  Core Scheduling for SMT (SCHED_CORE) [N/y/?] (NEW)

This is the only interactive place in the build process.

Commit 174a1dcc ("kbuild: sink stdout from cmd for silent build")
suppressed Kconfig prompts as well because syncconfig is invoked by
the 'cmd' macro. You cannot notice the fact that Kconfig is waiting
for the user input.

Use 'kecho' to show the equivalent short log without suppressing stdout
from sub-make.

Fixes: 174a1dcc ("kbuild: sink stdout from cmd for silent build")
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>

The commit 042da426 ("scripts/setlocalversion: simplify the short
version part") reduces indentation. Unfortunately, it also changes behavior
in a subtle way - if the user has empty "LOCALVERSION" variable, the plus
sign is appended to the kernel version. It wasn't appended before.

This patch reverts to the old behavior - we append the plus sign only if
the LOCALVERSION variable is not set.

Fixes: 042da426 ("scripts/setlocalversion: simplify the short version part")
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

The tracepoints trace_sched_stat_{wait, sleep, iowait} are not exposed to user
if CONFIG_SCHEDSTATS is not set, "perf sched record" records the three events.
As a result, the command fails.

Before:

  #perf sched record sleep 1
  event syntax error: 'sched:sched_stat_wait'
                       \___ unknown tracepoint

  Error:  File /sys/kernel/tracing/events/sched/sched_stat_wait not found.
  Hint:   Perhaps this kernel misses some CONFIG_ setting to enable this feature?.

  Run 'perf list' for a list of valid events

   Usage: perf record [<options>] [<command>]
      or: perf record [<options>] -- <command> [<options>]

      -e, --event <event>   event selector. use 'perf list' to list available events

Solution:
  Check whether schedstat tracepoints are exposed. If no, these events are not recorded.

After:
  # perf sched record sleep 1
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.163 MB perf.data (1091 samples) ]
  # perf sched report
  run measurement overhead: 4736 nsecs
  sleep measurement overhead: 9059979 nsecs
  the run test took 999854 nsecs
  the sleep test took 8945271 nsecs
  nr_run_events:        716
  nr_sleep_events:      785
  nr_wakeup_events:     0
  ...
  ------------------------------------------------------------

Fixes: 2a09b5de ("sched/fair: do not expose some tracepoints to user if CONFIG_SCHEDSTATS is not set")
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Yafang Shao <laoar.shao@gmail.com>
Link: http://lore.kernel.org/lkml/20210713112358.194693-1-yangjihong1@huawei.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The "address" member of "struct probe_trace_point" uses long data type.
If kernel is 64-bit and perf program is 32-bit, size of "address"
variable is 32 bits.

As a result, upper 32 bits of address read from kernel are truncated, an
error occurs during address comparison in kprobe_warn_out_range().

Before:

  # perf probe -a schedule
  schedule is out of .text, skip it.
    Error: Failed to add events.

Solution:
  Change data type of "address" variable to u64 and change corresponding
address printing and value assignment.

After:

  # perf.new.new probe -a schedule
  Added new event:
    probe:schedule       (on schedule)

  You can now use it in all perf tools, such as:

          perf record -e probe:schedule -aR sleep 1

  # perf probe -l
    probe:schedule       (on schedule@kernel/sched/core.c)
  # perf record -e probe:schedule -aR sleep 1
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.156 MB perf.data (1366 samples) ]
  # perf report --stdio
  # To display the perf.data header info, please use --header/--header-only options.
  #
  #
  # Total Lost Samples: 0
  #
  # Samples: 1K of event 'probe:schedule'
  # Event count (approx.): 1366
  #
  # Overhead  Command          Shared Object      Symbol
  # ........  ...............  .................  ............
  #
       6.22%  migration/0      [kernel.kallsyms]  [k] schedule
       6.22%  migration/1      [kernel.kallsyms]  [k] schedule
       6.22%  migration/2      [kernel.kallsyms]  [k] schedule
       6.22%  migration/3      [kernel.kallsyms]  [k] schedule
       6.15%  migration/10     [kernel.kallsyms]  [k] schedule
       6.15%  migration/11     [kernel.kallsyms]  [k] schedule
       6.15%  migration/12     [kernel.kallsyms]  [k] schedule
       6.15%  migration/13     [kernel.kallsyms]  [k] schedule
       6.15%  migration/14     [kernel.kallsyms]  [k] schedule
       6.15%  migration/15     [kernel.kallsyms]  [k] schedule
       6.15%  migration/4      [kernel.kallsyms]  [k] schedule
       6.15%  migration/5      [kernel.kallsyms]  [k] schedule
       6.15%  migration/6      [kernel.kallsyms]  [k] schedule
       6.15%  migration/7      [kernel.kallsyms]  [k] schedule
       6.15%  migration/8      [kernel.kallsyms]  [k] schedule
       6.15%  migration/9      [kernel.kallsyms]  [k] schedule
       0.22%  rcu_sched        [kernel.kallsyms]  [k] schedule
  ...
  #
  # (Cannot load tips.txt file, please install perf!)
  #
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jianlin Lv <jianlin.lv@arm.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Li Huafei <lihuafei1@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Link: http://lore.kernel.org/lkml/20210715063723.11926-1-yangjihong1@huawei.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

When using 'perf report' in directory mode, the first file is not closed
on exit, causing a memory leak.

The problem is caused by the iterating variable never reaching 0.

Fixes: 14552063 ("perf data: Add perf_data__(create_dir|close_dir) functions")
Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zhen Lei <thunder.leizhen@huawei.com>
Link: http://lore.kernel.org/lkml/20210716141122.858082-1-rickyman7@gmail.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

ASan reports some memory leaks when running:

  # perf test "42: BPF filter"

This second leak is caused by a strlist not being dellocated on error
inside probe_file__del_events.

This patch adds a goto label before the deallocation and makes the error
path jump to it.
Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Fixes: e7895e42 ("perf probe: Split del_perf_probe_events()")
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/174963c587ae77fa108af794669998e4ae558338.1626343282.git.rickyman7@gmail.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Pull ARM SoC fixes from Arnd Bergmann:
 "Here are the patches for this week that came as the fallout of the
  merge window:

   - Two fixes for the NVidia memory controller driver

   - multiple defconfig files get patched to turn CONFIG_FB back on
     after that is no longer selected by CONFIG_DRM

   - ffa and scmpi firmware drivers fixes, mostly addressing compiler
     and documentation warnings

   - Platform specific fixes for device tree files on ASpeed, Renesas
     and NVidia SoC, mostly for recent regressions.

   - A workaround for a regression on the USB PHY with devlink when the
     usb-nop-xceiv driver is not available until the rootfs is mounted.

   - Device tree compiler warnings in Arm Versatile-AB"

* tag 'soc-fixes-5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (35 commits)
  ARM: dts: versatile: Fix up interrupt controller node names
  ARM: multi_v7_defconfig: Make NOP_USB_XCEIV driver built-in
  ARM: configs: Update u8500_defconfig
  ARM: configs: Update Vexpress defconfig
  ARM: configs: Update Versatile defconfig
  ARM: configs: Update RealView defconfig
  ARM: configs: Update Integrator defconfig
  arm: Typo s/PCI_IXP4XX_LEGACY/IXP4XX_PCI_LEGACY/
  firmware: arm_scmi: Fix range check for the maximum number of pending messages
  firmware: arm_scmi: Avoid padding in sensor message structure
  firmware: arm_scmi: Fix kernel doc warnings about return values
  firmware: arm_scpi: Fix kernel doc warnings
  firmware: arm_scmi: Fix kernel doc warnings
  ARM: shmobile: defconfig: Restore graphical consoles
  firmware: arm_ffa: Fix a possible ffa_linux_errmap buffer overflow
  firmware: arm_ffa: Fix the comment style
  firmware: arm_ffa: Simplify probe function
  firmware: arm_ffa: Ensure drivers provide a probe function
  firmware: arm_scmi: Fix possible scmi_linux_errmap buffer overflow
  firmware: arm_scmi: Ensure drivers provide a probe function
  ...

This reverts commit 78869146.

It's not clear why, but it causes unexplained problems in entirely
unrelated xfs code.  The most likely explanation is some slab
corruption, possibly triggered due to CONFIG_SLUB_DEBUG_ON.  See [1].

It ends up having a few other problems too, like build errors on
arch/arc, and Geert reporting it using much more memory on m68k [3] (it
probably does so elsewhere too, but it is probably just more noticeable
on m68k).

The architecture issues (both build and memory use) are likely just
because this change effectively force-enabled STACKDEPOT (along with a
very bad default value for the stackdepot hash size).  But together with
the xfs issue, this all smells like "this commit was not ready" to me.

Link: https://lore.kernel.org/linux-xfs/YPE3l82acwgI2OiV@infradead.org/ [1]
Link: https://lore.kernel.org/lkml/202107150600.LkGNb4Vb-lkp@intel.com/ [2]
Link: https://lore.kernel.org/lkml/CAMuHMdW=eoVzM1Re5FVoEN87nKfiLmM2+Ah7eNu2KXEhCvbZyA@mail.gmail.com/ [3]
Reported-by: Christoph Hellwig <hch@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull SCSI fixes from James Bottomley:
 "One core fix for an oops which can occur if the error handling thread
  fails to start for some reason and the driver is removed.

  The other fixes are all minor ones in drivers"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: ufs: core: Add missing host_lock in ufshcd_vops_setup_xfer_req()
  scsi: mpi3mr: Fix W=1 compilation warnings
  scsi: pm8001: Clean up kernel-doc and comments
  scsi: zfcp: Report port fc_security as unknown early during remote cable pull
  scsi: core: Fix bad pointer dereference when ehandler kthread is invalid
  scsi: fas216: Fix a build error
  scsi: core: Fix the documentation of the scsi_execute() time parameter

Pull cifs fixes from Steve French:
 "Eight cifs/smb3 fixes, including three for stable.

  Three are DFS related fixes, and two to fix problems pointed out by
  static checkers"

* tag '5.14-rc1-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: do not share tcp sessions of dfs connections
  SMB3.1.1: fix mount failure to some servers when compression enabled
  cifs: added WARN_ON for all the count decrements
  cifs: fix missing null session check in mount
  cifs: handle reconnect of tcon when there is no cached dfs referral
  cifs: fix the out of range assignment to bit fields in parse_server_interfaces
  cifs: Do not use the original cruid when following DFS links for multiuser mounts
  cifs: use the expiry output of dns_query to schedule next resolution

Merge tag 'linux-kselftest-kunit-fixes-5.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kunit fixes from Shuah Khan:
 "Fixes to kunit tool and documentation:

   - fix asserts on older python versions

   - fixes to misleading error messages when TAP header format is
     incorrect or when file is missing

   - documentation fix: drop obsolete information about uml_abort
     coverage

   - remove unnecessary annotations"

* tag 'linux-kselftest-kunit-fixes-5.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  kunit: tool: Assert the version requirement
  kunit: tool: remove unnecessary "annotations" import
  Documentation: kunit: drop obsolete note about uml_abort for coverage
  kunit: tool: Fix error messages for cases of no tests and wrong TAP header

Merge tag 'linux-kselftest-fixes-5.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kselftest fix from Shuah Khan:
 "A fix to memory-hotplug hot-remove test to stop spamming logs with
  dump_page() entries and slowing the system down to a crawl"

* tag 'linux-kselftest-fixes-5.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests: memory-hotplug: avoid spamming logs with dump_page(), ratio limit hot-remove error test

Pull tracing fix from Steven Rostedt:
 "Fix the histogram logic from possibly crashing the kernel

  Working on the histogram code, I found that if you dereference a char
  pointer in a trace event that happens to point to user space, it can
  crash the kernel, as it does no checks of that pointer. I have code
  coming that will do this better, so just remove this ability to treat
  character pointers in trace events as stings in the histogram"

* tag 'trace-v5.14-5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Do not reference char * as a string in histograms

vcpu_put is not called if the user copy fails. This can result in preempt
notifier corruption and crashes, among other issues.

Fixes: b3cebfe8 ("KVM: PPC: Move vcpu_load/vcpu_put down to each ioctl case in kvm_arch_vcpu_ioctl")
Reported-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210716024310.164448-2-npiggin@gmail.com

When running CPU_FTR_P9_TM_HV_ASSIST, HFSCR[TM] is set for the guest
even if the host has CONFIG_TRANSACTIONAL_MEM=n, which causes it to be
unprepared to handle guest exits while transactional.

Normal guests don't have a problem because the HTM capability will not
be advertised, but a rogue or buggy one could crash the host.

Fixes: 4bb3c7a0 ("KVM: PPC: Book3S HV: Work around transactional memory bugs in POWER9")
Reported-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210716024310.164448-1-npiggin@gmail.com

Pull devicetree fixes from Rob Herring:

 - Drop 'resets' as required on renesas,du

 - Moving of fixed string patterns for 'properties' instead of
   'patternProperties'

 - Drop more redundant minItems/maxItems that we merged in the merge
   window

 - Indentation warning fix for sja1105

* tag 'devicetree-fixes-for-5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: display: renesas,du: Make resets optional on R-Car H1
  dt-bindings: Move fixed string 'patternProperties' to 'properties'
  dt-bindings: More dropping redundant minItems/maxItems
  dt-bindings: net: dsa: sja1105: Fix indentation warnings

Pull arm64 fixes from Will Deacon:
 "The bulk of the diffstat consists of changes to our uaccess routines
  so that they fall back to bytewise copying prior to reporting complete
  failure when the initial (multi-byte) access faults.

  However, the most disappointing change here is that we've had to bump
  ARCH_DMA_MINALIGN back to 128 bytes thanks to Qualcomm's "Kryo" CPU,
  which ended up in the MSM8996 mobile SoC. Still, at least we're now
  aware of this design and one of the hardware designers confirmed the
  L2 cacheline size for us.

  Summary:

   - Fix instrumentation annotations for entry code

   - Ensure kernel MTE state is restored correctly on resume from suspend

   - Fix MTE fault from new strlen() routine

   - Fallback to byte-wise accesses on initial uaccess fault

   - Bump Clang requirement for BTI

   - Revert ARCH_DMA_MINALIGN back to 128 bytes (shakes fist at Qualcomm)"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: entry: fix KCOV suppression
  arm64: entry: add missing noinstr
  arm64: mte: fix restoration of GCR_EL1 from suspend
  arm64: Avoid premature usercopy failure
  arm64: Restrict ARM64_BTI_KERNEL to clang 12.0.0 and newer
  Revert "arm64: cache: Lower ARCH_DMA_MINALIGN to 64 (L1_CACHE_BYTES)"
  arm64: Add missing header <asm/smp.h> in two files
  arm64: fix strlen() with CONFIG_KASAN_HW_TAGS

Once the new schema interrupt-controller/arm,vic.yaml is added, we get
the below warnings:

        arch/arm/boot/dts/versatile-ab.dt.yaml:
        intc@10140000: $nodename:0: 'intc@10140000' does not match
        '^interrupt-controller(@[0-9a-f,]+)*$'

	arch/arm/boot/dts/versatile-ab.dt.yaml:
	intc@10140000: 'clear-mask' does not match any of the regexes

Fix the node names for the interrupt controller to conform
to the standard node name interrupt-controller@.. Also drop invalid
clear-mask property.
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210701132118.759454-1-sudeep.holla@arm.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'aspeed-5.14-devicetree-2' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into arm/fixes

ASPEED device tree fixes for 5.14

 - eMMC phase corrections so Tacoma and Everest can boot

 - VUART irq polarity fix for e3c246d4i, using new bindings

 - I2C address fix for Rainier power supply

 - GPIO line name fixes

* tag 'aspeed-5.14-devicetree-2' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc:
  ARM: dts: aspeed: everest: PSU #3 address change
  ARM: dts: everest: Add phase corrections for eMMC
  ARM: dts: tacoma: Add phase corrections for eMMC
  ARM: dts: aspeed: Update e3c246d4i vuart properties
  ARM: dts: aspeed: Fix AST2600 machines line names

Link: https://lore.kernel.org/r/CACPK8XefdPzeOUDnDgk9cHQEs-9wF_ZSPdYQRzuNOpGZTyGUKQ@mail.gmail.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

The usage of usb-nop-xceiv PHY on Raspberry Pi boards with BCM283x has
been a "regression source" a lot of times. The last case is breakage of
USB mass storage boot has been commit e5904747 ("driver core: Set
fw_devlink=on by default") for multi_v7_defconfig. As long as
NOP_USB_XCEIV is configured as module, the dwc2 USB driver defer probing
endlessly and prevent booting from USB mass storage device. So make
the driver built-in as in bcm2835_defconfig and arm64/defconfig.

Fixes: e5904747 ("driver core: Set fw_devlink=on by default")
Reported-by: Ojaswin Mujoo <ojaswin98@gmail.com>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/1625915095-23077-1-git-send-email-stefan.wahren@i2se.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

The platform lost the framebuffer due to a commit solving a
circular dependency in v5.14-rc1, so add it back in by explicitly
selecting the framebuffer.

The U8500 has also gained a few systems using touchscreens from
Cypress, Melfas and Zinitix so add these at the same time as
we're updating the defconfig anyway.

Fixes: f611b1e7 ("drm: Avoid circular dependencies for CONFIG_FB")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: phone-devel@vger.kernel.org
Cc: Kees Cook <keescook@chromium.org>
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Stephan Gerhold <stephan@gerhold.net>
Cc: newbyte@disroot.org
Link: https://lore.kernel.org/r/20210712085522.672482-1-linus.walleij@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

This updates the Versatile Express defconfig for the changes
in the v5.14-rc1 kernel:

- The Framebuffer CONFIG_FB needs to be explicitly selected
  or we don't get any framebuffer anymore. DRM has stopped to
  select FB because of circular dependency.
- CONFIG_CMA options were moved around.
- CONFIG_MODULES options were moved around.
- CONFIG_CRYPTO_HW was moved around.

Fixes: f611b1e7 ("drm: Avoid circular dependencies for CONFIG_FB")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20210713133708.94397-1-linus.walleij@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>