- 27 Sep, 2006 34 commits
-
-
Paul Mundt authored
Add CPU_HAS_PTEA, refactor some of the cpu flag settings. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
kogiidena authored
This adds support for the I-O DATA Landisk. Signed-off-by: kogiidena <kogiidena@eggplant.ddo.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Paul Mundt authored
Drop virt_to_bus() from sg_dma_address() so libata builds. While we're at it, move sg_dma_address() and sg_dma_len() from pci.h to scatterlist.h. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Ollie Wild authored
There's a bug in the Hitachi SuperH csum_partial_copy_generic() implementation. If the supplied length is 1 (and several alignment conditions are met), the function immediately branches to label 4. However, the assembly at label 4 expects the length to be stored in register r2. Since this has not occurred, subsequent behavior is undefined. This can cause bad payload checksums in TCP connections. I've fixed the problem by initializing register r2 prior to the branch instruction. Signed-off-by: Ollie Wild <aaw@rincewind.tv> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Paul Mundt authored
We had a pretty interesting oops happening, where copy_user_page() was down()'ing p3map_sem[] with a bogus offset (particularly, an offset that hadn't been initialized with sema_init(), due to the mismatch between cpu_data->dcache.n_aliases and what was assumed based off of the old CACHE_ALIAS value). Luckily, spinlock debugging caught this for us, and so we drop the old hardcoded CACHE_ALIAS for sh4 completely and rely on the run-time probed cpu_data->dcache.alias_mask. This in turn gets the p3map_sem[] index right, and everything works again. While we're at it, also convert to 4-level page tables.. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Paul Mundt authored
The syscall table has lagged behind a bit, wire up the new ones.. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Alexey Dobriyan authored
It's defined in <linux/cpumask.h> and log is horribly flooded by "redefined" messages. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Paul Mundt authored
Merge support for SH7770 and SH7780 SH-4A subtypes. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Paul Mundt authored
Update oprofile build rules for additional subtypes, particularly SH7750S/SH7091. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Paul Mundt authored
Allow multiple early printk consoles via earlyprintk=. With this change earlyprintk is no longer enabled by default, it must be specified on the kernel command line. Optionally with ,keep to prevent unreg by tty_io. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Paul Mundt authored
SH-2/3/4 are able to prefetch, add support for it.. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Toshinobu Sugioka authored
Minor sign-extension bug in SH-specific memset().. Signed-off-by: Toshinobu Sugioka <sugioka@itonet.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Paul Mundt authored
Newer SH7760 cuts have a range of acceptable PRR values.. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Richard Curnow authored
This reworks some of the SH-4 cache handling code to more easily accomodate newer-style caches (particularly for the > direct-mapped case), as well as optimizing some of the old code. Signed-off-by: Richard Curnow <richard.curnow@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Paul Mundt authored
SH-4A supports 'synco' as a barrier, sprinkle it around the cache ops as necessary.. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Paul Mundt authored
More of the same, trivial cleanups, and moving options to their own board-specific Kconfig. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Paul Mundt authored
Various cleanups for HS7751RVoIP. Mostly just getting rid of the old mach.c and splitting codec configuration in to its own Kconfig. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Andriy Skulysh authored
Update the SH DAC audio driver for the clock framework. Signed-off-by: Andriy Skulysh <askulysh@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Andriy Skulysh authored
suspend/resume support for hitfb, as well as some other minor cleanups. Signed-off-by: Andriy Skulysh <askulysh@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Paul Mundt authored
With the I/O rework for hd64461 we're down to a single header, so move it by itself and get rid of the directory. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Paul Mundt authored
SH7300 has a different TMU_TOCR, make the TMU code work again. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Paul Mundt authored
Some of these have suffered some bitrot, and so there is some degree of dead code that has been left sitting around, clean it up.. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Paul Mundt authored
We don't support this on SH, so just disable it.. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Paul Mundt authored
For some of the larger sizes we permitted spanning pages across several PTEs, but this turned out to not be generally useful. This reverts the sh hugetlbpage interface to something more sensible using huge pages at single PTE granularity. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Andriy Skulysh authored
Some minor cleanups for the updated consolidated hp6xx mach-type. Signed-off-by: Andriy Skulysh <askulysh@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Paul Mundt authored
We had quite a bit of whitespace damage, clean most of it up.. Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Arthur Othieno <a.othieno@bluewin.ch> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Paul Mundt authored
These were previously sprinkled in machine_power_off(), though missed being updated when the rest of the boards switched over. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Paul Mundt authored
We had a special .stack section in the ld script that was being used to position r15 initially. This is nonsensical, as we can just use a THREAD_SIZE offset from the init_thread_union instead (as every other arch does). Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Paul Mundt authored
in_nmi shifted down a few labels, so we were inadvertently clearing the lower byte of do_syscall_trace, badness ensues. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Paul Mundt authored
Move the syscall table in to its own file, as per sh64. The entry.S bits will end up being considerably different in the sh2/sh2a cases, so this lets us keep things in sync somewhat.. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Paul Mundt authored
Fix use of uninitialized spinlocks, caught with spinlock debugging.. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Paul Mundt authored
flush_cache_range() wasn't page aligning the end of the range, we can't assume that it will always be page aligned, and we ended up getting unaligned faults in some rare call paths. Additionally, we add a small optimization to just purge the dcache entirely if the range is large enough that the page table walking will take longer. We use an arbitrary value of 64 pages for the large range size, as per sh64. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Tom Rini authored
We didn't have one of these before, a simple implementation borrowed from MIPS as well as the __HAVE_ARCH_CMPXCHG bits. Signed-off-by: Tom Rini <trini@kernel.crashing.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
Paul Mundt authored
SystemH needs this header as well, not just 770x SE. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-
- 26 Sep, 2006 6 commits
-
-
git://one.firstfloor.org/home/andi/git/linux-2.6Linus Torvalds authored
* 'for-linus' of git://one.firstfloor.org/home/andi/git/linux-2.6: (225 commits) [PATCH] Don't set calgary iommu as default y [PATCH] i386/x86-64: New Intel feature flags [PATCH] x86: Add a cumulative thermal throttle event counter. [PATCH] i386: Make the jiffies compares use the 64bit safe macros. [PATCH] x86: Refactor thermal throttle processing [PATCH] Add 64bit jiffies compares (for use with get_jiffies_64) [PATCH] Fix unwinder warning in traps.c [PATCH] x86: Allow disabling early pci scans with pci=noearly or disallowing conf1 [PATCH] x86: Move direct PCI scanning functions out of line [PATCH] i386/x86-64: Make all early PCI scans dependent on CONFIG_PCI [PATCH] Don't leak NT bit into next task [PATCH] i386/x86-64: Work around gcc bug with noreturn functions in unwinder [PATCH] Fix some broken white space in ia32_signal.c [PATCH] Initialize argument registers for 32bit signal handlers. [PATCH] Remove all traces of signal number conversion [PATCH] Don't synchronize time reading on single core AMD systems [PATCH] Remove outdated comment in x86-64 mmconfig code [PATCH] Use string instructions for Core2 copy/clear [PATCH] x86: - restore i8259A eoi status on resume [PATCH] i386: Split multi-line printk in oops output. ...
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6: (47 commits) Driver core: Don't call put methods while holding a spinlock Driver core: Remove unneeded routines from driver core Driver core: Fix potential deadlock in driver core PCI: enable driver multi-threaded probe Driver Core: add ability for drivers to do a threaded probe sysfs: add proper sysfs_init() prototype drivers/base: check errors drivers/base: Platform notify needs to occur before drivers attach to the device v4l-dev2: handle __must_check add CONFIG_ENABLE_MUST_CHECK add __must_check to device management code Driver core: fixed add_bind_files() definition Driver core: fix comments in drivers/base/power/resume.c sysfs_remove_bin_file: no return value, dump_stack on error kobject: must_check fixes Driver core: add ability for devices to create and remove bin files Class: add support for class interfaces for devices Driver core: create devices/virtual/ tree Driver core: add device_rename function Driver core: add ability for classes to handle devices properly ...
-
Heiko Carstens authored
Convert cmm's usage of kernel_thread to kthread_run. Also create the cmmthread at module load time, so it is possible to check if creation of the thread fails. In addition the cmmthread now gets terminated when the module gets unloaded instead of leaving a stale kernel thread. Also check the return values of other registration functions at module load and handle their return values appropriately. Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Jeff Dike authored
Include the host architecture's ptrace-abi.h instead of ptrace.h. There was some cpp mangling of names around the ptrace.h include to avoid symbol clashes between UML and the host architecture. Most of these can go away. The exception is struct pt_regs, which is convenient to have in userspace, but must be renamed in order that UML can define its own. ptrace-x86_64.h needed to have some now-obsolete cpp cruft and a declaration removed. Signed-off-by: Jeff Dike <jdike@addtoit.com> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Jeff Dike authored
The use of SEGMENT_RPL_MASK in the i386 ptrace.h introduced by x86-allow-a-kernel-to-not-be-in-ring-0.patch broke the UML build, as UML includes the underlying architecture's ptrace.h, but has no easy access to the x86 segment definitions. Rather than kludging around this, as in the past, this patch splits the userspace-usable parts, which are the bits that UML needs, of ptrace.h into ptrace-abi.h, which is included back into ptrace.h. Thus, there is no net effect on i386. As a side-effect, this creates a ptrace header which is close to being usable in /usr/include. x86_64 is also treated in this way for consistency. There was some trailing whitespace there, which is cleaned up. Signed-off-by: Jeff Dike <jdike@addtoit.com> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Alan Cox authored
Ensure current->signal->tty doesn't get freed during log_exec(). Signed-off-by: Alan Cox <alan@redhat.com> Acked-by: Jeff Dike <jdike@addtoit.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-