1. 28 Oct, 2005 40 commits
    • Greg Kroah-Hartman's avatar
      [PATCH] USB: make wHubCharacteristics __le16 to match other usb descriptor fields · 74ad9bd2
      Greg Kroah-Hartman authored
      Also has the nice benefit of making sparc alignment issues go away.
      
      Thanks to David Miller for pointing out the problems here.
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      
       drivers/usb/core/hub.c |   22 ++++++++++++----------
       drivers/usb/core/hub.h |    2 +-
       2 files changed, 13 insertions(+), 11 deletions(-)
      74ad9bd2
    • Alan Stern's avatar
      [PATCH] USB: File-Storage gadget: use the kthread API · 22efcf4a
      Alan Stern authored
      This patch (as566) converts the File-Storage gadget over to the kthread
      API.  The new code doesn't use kthread_stop because the control thread
      needs to terminate asynchronously when it receives a signal.
      Signed-off-by: default avatarAlan Stern <stern@rowland.harvard.edu>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      
       drivers/usb/gadget/file_storage.c |   32 +++++++++++++-------------------
       1 file changed, 13 insertions(+), 19 deletions(-)
      22efcf4a
    • Andrew Morton's avatar
      [PATCH] USB: sisusb warning fix · dabb5928
      Andrew Morton authored
      drivers/usb/misc/sisusbvga/sisusb.c: In function `sisusb_reset_text_mode':
      drivers/usb/misc/sisusbvga/sisusb.c:2461: warning: assignment discards qualifiers from pointer target type
      Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      
       drivers/usb/misc/sisusbvga/sisusb.c |    2 +-
       1 file changed, 1 insertion(+), 1 deletion(-)
      dabb5928
    • Alan Stern's avatar
      [PATCH] USB: UHCI: Spruce up some comments · 8b262bd2
      Alan Stern authored
      This patch (as570) changes some comments in the uhci-hcd header file and
      removes an unused declaration (something I forgot to erase in an earlier
      patch).
      Signed-off-by: default avatarAlan Stern <stern@rowland.harvard.edu>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      
       drivers/usb/host/uhci-hcd.h |   91 +++++++++++++++++++++++---------------------
       1 file changed, 49 insertions(+), 42 deletions(-)
      8b262bd2
    • Alan Stern's avatar
      [PATCH] USB: usb_bulk_message() handles interrupts endpoints · d09d36a9
      Alan Stern authored
      Because there is no bulk_interrupt_message() routine and no
      USBDEVFS_INTERRUPT ioctl, people have been forced to abuse the
      usb_bulk_message() routine and USBDEVFS_BULK by using them for interrupt
      transfers as well as bulk transfers.
      
      This patch (as567) formalizes this practice and adds code to
      usb_bulk_message() for detecting when the target is really an interrupt
      endpoint.  If it is, the routine submits an interrupt URB (using the
      default interval) instead of a bulk URB.  In theory this should help HCDs
      that don't like it when people try to mix transfer types, queuing both
      periodic and non-periodic types for the same endpoint.
      
      Not fully tested -- I don't have any programs that use USBDEVFS_BULK for
      interrupt transfers -- but it compiles okay and normal bulk messages work
      as well as before.
      Signed-off-by: default avatarAlan Stern <stern@rowland.harvard.edu>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      
       drivers/usb/core/message.c |   24 ++++++++++++++++++++----
       1 file changed, 20 insertions(+), 4 deletions(-)
      d09d36a9
    • David Brownell's avatar
      [PATCH] updates for "controller suspended" handling · b13296c6
      David Brownell authored
      Reject URBs to _all_ devices when their host controllers are suspended;
      even root hub registers will be unavailable.  Also, don't reject urbs
      to root hubs in other cases; the only upstream link is through that
      controller (on PCI or whatever SOC bus is in use).
      Signed-off-by: default avatarDavid Brownell <dbrownell@users.sourceforge.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      
       drivers/usb/core/hcd.c |   28 ++++++++++++----------------
       drivers/usb/core/urb.c |    3 ++-
       2 files changed, 14 insertions(+), 17 deletions(-)
      b13296c6
    • David Brownell's avatar
      [PATCH] stop exporting two functions · 5edbfb7c
      David Brownell authored
      The way we're looking at USB suspend lately doesn't expect drivers to
      call usb_suspend_device() or usb_resume_device() directly; that'll
      be implicit when no interfaces are in use.
      
      This patch removes those APIs from visibility outside usbcore.
      Signed-off-by: default avatarDavid Brownell <dbrownell@users.sourceforge.net>
      
       drivers/usb/core/hub.c |   12 ++++--------
       drivers/usb/core/usb.h |    4 ++++
       include/linux/usb.h    |    5 -----
       3 files changed, 8 insertions(+), 13 deletions(-)
      5edbfb7c
    • David Brownell's avatar
      [PATCH] ISP116x PM updates · ccdcf77a
      David Brownell authored
      This makes the isp116x driver stop using usb_suspend_device() and
      usb_resume_device() ... usbcore now calls to the root hub methods,
      removing the need for this.  It also switches from keventd to khubd
      for remote wakeup.  (Compile tested.)
      Signed-off-by: default avatarDavid Brownell <dbrownell@users.sourceforge.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      
       drivers/usb/host/isp116x-hcd.c |   29 ++++-------------------------
       drivers/usb/host/isp116x.h     |    1 -
       2 files changed, 4 insertions(+), 26 deletions(-)
      ccdcf77a
    • David Brownell's avatar
      [PATCH] UHCI PM updates · a7f72abe
      David Brownell authored
      This removes suspend and resume path recursion in UHCI.
      Signed-off-by: default avatarDavid Brownell <dbrownell@users.sourceforge.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      
       drivers/usb/host/uhci-hcd.c |    9 ---------
       1 file changed, 9 deletions(-)
      a7f72abe
    • David Brownell's avatar
      [PATCH] update PCI early-handoff handling for OHCI · f2cb36c1
      David Brownell authored
      The PCI "early usb handoff" quirk logic didn't work like "ohci-hcd" ...
      This patch makes it do so by:
      
        - Resetting the controller after kicking BIOS off, matching the
          normal "chip in hardware reset" startup mode;
      
        - Reporting any BIOS that borks this simple handoff; it's likely
          got a few other surprises for us too.
      
        - Ignoring that handoff on HPPA;
      
      The diagnostic string is mostly shared with EHCI, saving a few bytes.
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      
       drivers/usb/host/pci-quirks.c |   22 ++++++++++++++++++----
       1 file changed, 18 insertions(+), 4 deletions(-)
      f2cb36c1
    • David Brownell's avatar
      [PATCH] OHCI PM updates · f197b2c5
      David Brownell authored
      This simplifies the OHCI root hub suspend logic:
      
       - Uses new usbcore root hub calls to make autosuspend work again:
      	* Uses a newish usbcore root hub wakeup mechanism,
      	  making requests to khubd not keventd.
      	* Uses an even newer sibling suspend hook.
      
       - Expect someone always made usbcore call ohci_hub_suspend() before bus
         glue fires; and that ohci_hub_resume() is only called after that bus
         glue ran.  Previously, only CONFIG_USB_SUSPEND promised those things.
         (Includes updates to PCI and OMAP bus glue.)
      
       - Handle a not-noticed-before special case during resume from one of
         the swsusp snapshots when using "usb-handoff":  the controller isn't
         left in RESET state.  (A bug to fix in the usb-handoff code...)
      
      Also cleans up a minor debug printk glitch, and switches an mdelay over
      to an msleep (how did that stick around for so long?).
      Signed-off-by: default avatarDavid Brownell <dbrownell@users.sourceforge.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      
       drivers/usb/host/ohci-dbg.c  |    4 ----
       drivers/usb/host/ohci-hcd.c  |    2 +-
       drivers/usb/host/ohci-hub.c  |   42 ++++++++++++------------------------------
       drivers/usb/host/ohci-mem.c  |    1 -
       drivers/usb/host/ohci-omap.c |   36 ++++++++++++------------------------
       drivers/usb/host/ohci-pci.c  |   40 ++++++++--------------------------------
       drivers/usb/host/ohci.h      |    1 -
       7 files changed, 33 insertions(+), 93 deletions(-)
      f197b2c5
    • David Brownell's avatar
      [PATCH] usbcore PCI glue updates for PM · 5f827ea3
      David Brownell authored
      This updates the PCI glue to address the new and simplified usbcore suspend
      semantics, where CONFIG_USB_SUSPEND becomes irrelevant to HCDs because
      hcd->hub_suspend() will always be called.
      
        - Removes now-unneeded recursion support
      
        - Go back to ignoring faults reported by the wakeup calls; we expect them
          to fail sometimes, and that's just fine.
      
      The PCI HCDs will need simple changes to catch up to this, like being able
      to ignore the setting of CONFIG_USB_SUSPEND.
      Signed-off-by: default avatarDavid Brownell <dbrownell@users.sourceforge.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      
       drivers/usb/core/hcd-pci.c |  106 +++++++++++++++++++++------------------------
       drivers/usb/core/hcd.h     |    6 +-
       2 files changed, 53 insertions(+), 59 deletions(-)
      5f827ea3
    • David Brownell's avatar
      [PATCH] root hub updates (greater half) · f3f3253d
      David Brownell authored
      This patch associates hub suspend and resume logic (including for root hubs)
      with CONFIG_PM -- instead of CONFIG_USB_SUSPEND as before -- thereby unifying
      two troublesome versions of suspend logic into just one.  It'll be easier to
      keep things right from now on.
      
        - Now usbcore _always_ calls hcd->hub_suspend as needed, instead of
          only when USB_SUSPEND is enabled:
           * Those root hub methods are now called from hub suspend/resume;
             no more skipping between layers during device suspend/resume;
           * It now handles cases allowed by sysfs or autosuspended root hubs,
             by forcing the hub interface to resume too.
      
        - All devices, including virtual root hubs, now get the same treatment
          on their resume paths ... including re-activating all their interfaces.
      
      Plus it gets rid of those stub copies of usb_{suspend,resume}_device(), and
      updates the Kconfig to match the new definition of USB_SUSPEND:  it provides
      (a) selective suspend, downstream from hubs; and (b) remote wakeup, upstream
      from any device configuration which supports it.
      
      This calls for minor followup patches for most HCDs (and their PCI glue).
      Signed-off-by: default avatarDavid Brownell <dbrownell@users.sourceforge.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      
       drivers/usb/core/Kconfig |   11 ++-
       drivers/usb/core/hub.c   |  163 +++++++++++++++++++++++++----------------------
       2 files changed, 97 insertions(+), 77 deletions(-)
      f3f3253d
    • David Brownell's avatar
      [PATCH] root hub changes (lesser half) · 979d5199
      David Brownell authored
      This patch collects various small updates related to root hubs, to shrink
      later patches which build on them.
      
        - For root hub suspend/resume support:
           * Make the existing usb_hcd_resume_root_hub() routine respect pmcore
             locking, exporting and using the dpm_runtime_resume() method.
           * Add a new usb_hcd_suspend_root_hub() to pair with that routine.
             (Essential to make OHCI autosuspend behave again...)
           * HC_SUSPENDED by itself only refers to the root hub's downstream ports.
             So let HCDs see root hub URBs unless the parent device is suspended.
      
        - Remove an assertion we no longer need (and now, also don't want).
      
        - Generic suspend/resume updates to work better with swsusp.
           * Ignore the FREEZE vs SUSPEND distinction for hardware; trying to
             use it breaks the swsusp snapshots it's supposed to help (sigh).
           * On resume, mark devices as resumed right away, but then
             do nothing else if the device is marked NOTATTACHED.
      
      These changes shouldn't be very noticable by themselves.
      Signed-off-by: default avatarDavid Brownell <dbrownell@users.sourceforge.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      
       drivers/base/power/runtime.c |    1
       drivers/usb/core/hcd.c       |   64 ++++++++++++++++++++++++++++++++++++++-----
       drivers/usb/core/hcd.h       |    1
       drivers/usb/core/hub.c       |   45 ++++++++++++++++++++++++------
       drivers/usb/core/usb.c       |   20 +++++++++----
       drivers/usb/core/usb.h       |    1
       6 files changed, 111 insertions(+), 21 deletions(-)
      979d5199
    • David Brownell's avatar
      [PATCH] all HCDs provide root hub suspend/resume methods · 9293677a
      David Brownell authored
      This cleans up a small recent FIXME, ensuring that all the HCDs provide
      root hub suspend/resume methods.  It also wraps the calls to those root
      suspend routines just like on the PCI "USB_SUSPEND not defined" cases,
      so non-PCI bus glue won't be as tempted to behave very differently.
      
      Several of the SOC based OHCI drivers forgot to list those methods;
      the patch also adds those missing declarations.
      Signed-off-by: default avatarDavid Brownell <dbrownell@users.sourceforge.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      
       drivers/usb/core/hcd.c          |   42 +++++++++++++++++++++++++---------------
       drivers/usb/host/ohci-au1xxx.c  |    5 ++++
       drivers/usb/host/ohci-lh7a404.c |    5 ++++
       drivers/usb/host/ohci-pxa27x.c  |    1
       drivers/usb/host/ohci-s3c2410.c |    1
       drivers/usb/host/ohci-sa1111.c  |    1
       6 files changed, 40 insertions(+), 15 deletions(-)
      9293677a
    • Matt Porter's avatar
      [PATCH] EHCI, split out PCI glue · 7ff71d6a
      Matt Porter authored
      This splits BIOS and PCI specific support out of ehci-hcd.c into
      ehci-pci.c.  It follows the model already used in the OHCI driver
      so support for non-PCI EHCI controllers can be more easily added.
      Signed-off-by: default avatarMatt Porter <mporter@kernel.crashing.org>
      Signed-off-by: default avatarDavid Brownell <dbrownell@users.sourceforge.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      
       drivers/usb/host/ehci-hcd.c |  543 ++++++--------------------------------------
       drivers/usb/host/ehci-pci.c |  414 +++++++++++++++++++++++++++++++++
       drivers/usb/host/ehci.h     |    1
       3 files changed, 492 insertions(+), 466 deletions(-)
      7ff71d6a
    • David Brownell's avatar
      [PATCH] one less word in struct device · e9b7bd4e
      David Brownell authored
      This saves a word from "struct device" ... there's a refcounting mechanism
      stub that's rather ineffective (the values are never even tested!), which
      can safely be deleted.  With this patch it uses normal device refcounting,
      so any potential users of the pm_parent mechanism will be more correct.
      (That mechanism is actually unusable for now though; it does nothing.)
      Signed-off-by: default avatarDavid Brownell <dbrownell@users.sourceforge.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      
       drivers/base/power/main.c |   26 +++-----------------------
       include/linux/pm.h        |    1 -
       2 files changed, 3 insertions(+), 24 deletions(-)
      e9b7bd4e
    • Alan Stern's avatar
      [PATCH] USB: UHCI: Split apart the physical and logical framelist arrays · a1d59ce8
      Alan Stern authored
      This patch (as563) splits the physical and logical framelist arrays in
      uhci-hcd into two separate pieces.  This will allow slightly better memory
      utilization, since each piece is no larger than a single page whereas
      before the whole thing was a little bigger than two pages.  It also allows
      the logical array to be allocated in non-DMA-coherent memory.
      Signed-off-by: default avatarAlan Stern <stern@rowland.harvard.edu>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      a1d59ce8
    • Alan Stern's avatar
      [PATCH] USB: UHCI: Remove unused fields and unneeded tests for NULL · 8b4cd421
      Alan Stern authored
      This patch (as562) removes from the uhci-hcd driver a few unused fields
      and some unnecessary tests against NULL and assignments to NULL.  In fact
      it wasn't until fairly recently that the tests became unnecessary.
      Before last winter it was possible that the driver's stop() routine would
      get called even if the start() routine returned an error, but now that
      can't happen.  Hence there's no longer any need to check for partial
      initialization.
      Signed-off-by: default avatarAlan Stern <stern@rowland.harvard.edu>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      8b4cd421
    • Matt Porter's avatar
      [PATCH] USB: Fix usb hub build · e08fb39b
      Matt Porter authored
      Signed-off-by: default avatarMatt Porter <mporter@kernel.crashing.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      
       drivers/usb/core/hub.c |    2 +-
       1 file changed, 1 insertion(+), 1 deletion(-)
      e08fb39b
    • David Brownell's avatar
      [PATCH] remove some USB_SUSPEND dependencies · 8ad7fe16
      David Brownell authored
      This simplifies some of the PM-related #ifdeffing by recognizing
      that USB_SUSPEND depends on PM.  Also, OHCI drivers were often
      testing for USB_SUSPEND when they should have tested just PM.
      Signed-off-by: default avatarDavid Brownell <dbrownell@users.sourceforge.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      
       drivers/usb/core/hcd.c          |    2 ++
       drivers/usb/host/ohci-hcd.c     |    2 +-
       drivers/usb/host/ohci-hub.c     |    4 ++--
       drivers/usb/host/ohci-omap.c    |    2 +-
       drivers/usb/host/ohci-pci.c     |    2 +-
       drivers/usb/host/ohci-ppc-soc.c |    4 ++--
       drivers/usb/host/ohci-pxa27x.c  |    2 +-
       drivers/usb/host/ohci-s3c2410.c |    3 +--
       drivers/usb/host/ohci-sa1111.c  |    2 +-
       9 files changed, 12 insertions(+), 11 deletions(-)
      8ad7fe16
    • David Brownell's avatar
      [PATCH] remove duplicated resume path code · dbc3887e
      David Brownell authored
      This gets rid of some inconsistently duplicated logic to resume interfaces.
      Similar code was in both finish_port_resume() and in usb_generic_resume().
      Now there is just one copy of that code, accessed regardless of whether
      CONFIG_USB_SUSPEND is enabled.  Fault handling is also more consistent.
      Signed-off-by: default avatarDavid Brownell <dbrownell@users.sourceforge.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      dbc3887e
    • David Brownell's avatar
      [PATCH] remove usb_suspend_device() parameter · 390a8c34
      David Brownell authored
      This patch removes the extra usb_suspend_device() parameter.  The original
      reason to pass that parameter was so that this routine could suspend any
      active children.  A previous patch removed that functionality ... leaving
      no reason to pass the parameter.  A close analogy is pci_set_power_state,
      which doesn't need a pm_message_t either.
      
      On the internal code path that comes through the driver model, the parameter
      is now used to distinguish cases where USB devices need to "freeze" but not
      suspend.   It also checks for an error case that's accessible through sysfs:
      attempting to suspend a device before its interfaces (or for hubs, ports).
      Signed-off-by: default avatarDavid Brownell <dbrownell@users.sourceforge.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      
       drivers/usb/core/hub.c         |   34 +++++++++++++++++++++-------------
       drivers/usb/core/usb.c         |   23 +++++++++++++++++++++--
       drivers/usb/host/ehci-hcd.c    |    2 +-
       drivers/usb/host/isp116x-hcd.c |    2 +-
       drivers/usb/host/ohci-pci.c    |    2 +-
       include/linux/usb.h            |    2 +-
       6 files changed, 46 insertions(+), 19 deletions(-)
      390a8c34
    • David Brownell's avatar
      [PATCH] remove suspend-path recursion · c9f89fa4
      David Brownell authored
      This patch removes some recursion in the CONFIG_USB_SUSPEND logic, which
      suspended children (of devices or hubs) that weren't already suspended.
      When it sees such cases, suspend now just fails cleanly.
      
      That logic was not needed during system-wide sleep state transitions; and
      given the current notions of how to manage selective suspend transitions,
      we don't want it there either.  Where it was particularly handy was coping
      with various limitations of the sysfs "echo -n N > power/state" support.
      (These include assuming that "N" is always meaningful to the driver; and
      that drivers can only transition to state N from state zero.)
      Signed-off-by: default avatarDavid Brownell <dbrownell@users.sourceforge.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      c9f89fa4
    • David Brownell's avatar
      [PATCH] usb_interface power state · db690874
      David Brownell authored
      This updates the handling of power state for USB interfaces.
      
        - Formalizes an existing invariant:  interface "power state" is a boolean:
          ON when I/O is allowed, and FREEZE otherwise.  It does so by defining
          some inlined helpers, then using them.
      
        - Adds a useful invariant:  the only interfaces marked active are those
          bound to non-suspended drivers.  Later patches build on this invariant.
      
        - Simplifies the interface driver API (and removes some error paths) by
          removing the requirement that they record power state changes during
          suspend and resume callbacks.  Now usbcore does that.
      
      A few drivers were simplified to address that last change.
      Signed-off-by: default avatarDavid Brownell <dbrownell@users.sourceforge.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      
       drivers/usb/core/hub.c       |   33 +++++++++------------
       drivers/usb/core/message.c   |    1
       drivers/usb/core/usb.c       |   65 +++++++++++++++++++++++++++++++++----------
       drivers/usb/core/usb.h       |   18 +++++++++++
       drivers/usb/input/hid-core.c |    2 -
       drivers/usb/misc/usbtest.c   |   10 ------
       drivers/usb/net/pegasus.c    |    2 -
       drivers/usb/net/usbnet.c     |    2 -
       8 files changed, 85 insertions(+), 48 deletions(-)
      db690874
    • David Brownell's avatar
      [PATCH] USB: move handoff code · 7586269c
      David Brownell authored
      This moves the PCI quirk handling for USB host controllers from the
      PCI directory to the USB directory.  Follow-on patches will need to:
      
      (a) merge these copies with the originals in the HCD reset methods.
      they don't wholly agree, despite doing the very same thing; and
      
      (b) eventually change it so "usb-handoff" is the default, to help
      get more robust USB/BIOS/input/... interactions.
      Signed-off-by: default avatarDavid Brownell <dbrownell@users.sourceforge.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      
       drivers/Makefile              |    2
       drivers/pci/quirks.c          |  253 ---------------------------------------
       drivers/usb/Makefile          |    1
       drivers/usb/host/Makefile     |    5
       drivers/usb/host/pci-quirks.c |  272 ++++++++++++++++++++++++++++++++++++++++++
       5 files changed, 280 insertions(+), 253 deletions(-)
      7586269c
    • Pete Zaitcev's avatar
      [PATCH] ub: suppress gcc warnings for pointer casts · 38ffdd62
      Pete Zaitcev authored
      When building on a 64-bit platform, gcc produces a warning
      "cast of a pointer to an integer of a different size".
      The scatterlist.offset on the LHS is unsigned int, so I used
      that originally.
      Signed-off-by: default avatarPete Zaitcev <zaitcev@yahoo.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      
       drivers/block/ub.c |    4 ++--
       1 file changed, 2 insertions(+), 2 deletions(-)
      38ffdd62
    • Greg Kroah-Hartman's avatar
      [PATCH] USB: add more snooping hooks in devio.c · e639dd3f
      Greg Kroah-Hartman authored
      Now we can log the urbs travelling through usbfs
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      e639dd3f
    • Greg Kroah-Hartman's avatar
      [PATCH] devfs: Remove the mode field from usb_class_driver as it's no longer needed · d6e5bcf4
      Greg Kroah-Hartman authored
      Also fixes all drivers that set this field, and removes some other devfs
      specfic USB logic.
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      
       drivers/usb/class/usblp.c           |    3 +--
       drivers/usb/core/file.c             |   19 ++++---------------
       drivers/usb/image/mdc800.c          |    3 +--
       drivers/usb/input/aiptek.c          |    2 +-
       drivers/usb/input/hiddev.c          |    3 +--
       drivers/usb/media/dabusb.c          |    3 +--
       drivers/usb/misc/auerswald.c        |    3 +--
       drivers/usb/misc/idmouse.c          |    5 ++---
       drivers/usb/misc/legousbtower.c     |    5 ++---
       drivers/usb/misc/rio500.c           |    3 +--
       drivers/usb/misc/sisusbvga/sisusb.c |    5 -----
       drivers/usb/misc/usblcd.c           |    9 ++++-----
       drivers/usb/usb-skeleton.c          |    3 +--
       include/linux/usb.h                 |    7 ++-----
       14 files changed, 22 insertions(+), 51 deletions(-)
      d6e5bcf4
    • Greg Kroah-Hartman's avatar
      [PATCH] USB: add endpoint information to sysfs · 094f1649
      Greg Kroah-Hartman authored
      This patch adds endpoint information for both devices and interfaces to
      sysfs.  Previously it was only possible to get the endpoint information
      from usbfs, and never possible to get any information on endpoint 0.
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      
       drivers/usb/core/sysfs.c |  195 ++++++++++++++++++++++++++++++++++++++++++++++-
       include/linux/usb.h      |    4
       2 files changed, 197 insertions(+), 2 deletions(-)
      094f1649
    • Greg Kroah-Hartman's avatar
      [PATCH] USB: disable tasklet if rtl8150 device is removed while active. · 8da608ca
      Greg Kroah-Hartman authored
      This fixes a oops seen in the wild.
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      8da608ca
    • Rui Santos's avatar
      [PATCH] USB: ftdi: Artemis and ATIK based USB astronomical CCD cameras · c9c7746d
      Rui Santos authored
      This patch enables direct kernel support for the Artemis
      and ATIK astronomical based USB CCD cameras.
      Since all communications with this camera are done via an
      FTDI 245BM chip, it was only needed to specify the
      ProductID and VendorID of all three devices.
      In what tests are concerned, data was transfered from and
      to the FTDI at the chips Top speed (360KB/s).
      Signed-off-by: default avatarRui Santos <rsantos@grupopie.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      
       drivers/usb/serial/ftdi_sio.c |    3 +++
       drivers/usb/serial/ftdi_sio.h |   13 +++++++++++++
       2 files changed, 16 insertions(+)
      c9c7746d
    • David Brownell's avatar
      [PATCH] USB: ehci.patch (earlier irq disable) · 72f30b6f
      David Brownell authored
      This tweaks the EHCI reboot notifier to also halt the EHCI controller, and
      makes that halt code force IRQs off.  Both should always have been done.
      Signed-off-by: default avatarDavid Brownell <dbrownell@users.sourceforge.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      
       drivers/usb/host/ehci-hcd.c |    8 ++++++++
       1 file changed, 8 insertions(+)
      72f30b6f
    • Linus Torvalds's avatar
    • Linus Torvalds's avatar
      dbe0580d
    • Jesse Barnes's avatar
      [PATCH] PCI fixup for Toshiba laptops and ohci1394 · f8977d0a
      Jesse Barnes authored
      This is a fix for a bug I see on my Toshiba laptop, where the ohci1394
      controller gets initialized improperly.  The patch adds two PCI fixups
      to arch/i386/pci/fixup.c, one that happens early on to cache the value
      of the PCI_CACHE_LINE_SIZE config register, and another that later
      restores the value, along with a valid IRQ number and some BAR values.
      I've tested it on my laptop, and it prevents me from running into what I
      consider to be a major bug: IRQ 11 is disabled by the IRQ debug code,
      causing my wireless to break.
      
      Thanks to Rob for the original patch to ohci1394.c and Stefan for lots
      of proofreading (and a last minute bug caught in review!) and additional
      information collection.  I think the DMI system list is correct, but we
      may need to add some more PCI IDs to the PCI_FIXUP macros over time.
      Signed-off-by: default avatarJesse Barnes <jbarnes@virtuousgeek.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      f8977d0a
    • Grant Coady's avatar
      [PATCH] pci_ids: cleanup comments · 2f028234
      Grant Coady authored
      pci_ids.h cleanup: convert // comment to /* comment */
      Signed-off-by: default avatarGrant Coady <gcoady@gmail.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      2f028234
    • Randy Dunlap's avatar
      [PATCH] kernel-doc: PCI fixes · 8f7020d3
      Randy Dunlap authored
      PCI: add descriptions for missing function parameters.
      Eliminate all kernel-doc warnings here.
      Signed-off-by: default avatarRandy Dunlap <rdunlap@xenotime.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      8f7020d3
    • Randy Dunlap's avatar
      [PATCH] kernel-doc: fix PCI hotplug · f05aab8e
      Randy Dunlap authored
      PCI hotplug.c: does not contain kernel-doc, so don't process it for now.
      Signed-off-by: default avatarRandy Dunlap <rdunlap@xenotime.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      f05aab8e
    • Kristen Accardi's avatar
      [PATCH] acpiphp: allocate resources for adapters with bridges · 8e5dce35
      Kristen Accardi authored
      Allocate resources for adapters with bridges on them.
      Signed-off-by: default avatarKristen Carlson Accardi <kristen.c.accardi@intel.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      8e5dce35