- 15 Mar, 2023 16 commits
-
-
David S. Miller authored
Daniel Golle says: ==================== net: ethernet: mtk_eth_soc: minor SGMII fixes This small series brings two minor fixes for the SGMII unit found in MediaTek's router SoCs. The first patch resets the PCS internal state machine on major configuration changes, just like it is also done in MediaTek's SDK. The second patch makes sure we only write values and restart AN if actually needed, thus preventing unnesseray loss of an existing link in some cases. Both patches have previously been submitted as part of the series "net: ethernet: mtk_eth_soc: various enhancements" which grew a bit too big and it has correctly been criticized that some of the patches should rather go as fixes to net-next. This new series tries to address this. ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Daniel Golle authored
Only restart auto-negotiation and write link timer if actually necessary. This prevents losing the link in case of minor changes. Fixes: 7e538372 ("net: ethernet: mediatek: Re-add support SGMII") Reviewed-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Tested-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
Daniel Golle <daniel@makrotopia.org> Signed-off-by:
-
Daniel Golle authored
Reset the internal PCS state machine when changing interface mode. This prevents confusing the state machine when changing interface modes, e.g. from SGMII to 2500Base-X or vice-versa. Fixes: 7e538372 ("net: ethernet: mediatek: Re-add support SGMII") Reviewed-by:
-
Szymon Heidrich authored
Packet length retrieved from skb data may be larger than the actual socket buffer length (up to 9026 bytes). In such case the cloned skb passed up the network stack will leak kernel memory contents. Fixes: d0cad871 ("smsc75xx: SMSC LAN75xx USB gigabit ethernet adapter driver") Signed-off-by:
Szymon Heidrich <szymon.heidrich@gmail.com> Signed-off-by:
-
David S. Miller authored
Wenjia Zhang says: ==================== net/smc: Fixes 2023-03-01 The 1st patch solves the problem that CLC message initialization was not properly reversed in error handling path. And the 2nd one fixes the possible deadlock triggered by cancel_delayed_work_sync(). ==================== Signed-off-by: -
Stefan Raspl authored
CLC message initialization was not properly reversed in error handling path. Reported-and-suggested-by:
Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by:
Stefan Raspl <raspl@linux.ibm.com> Signed-off-by:
Wenjia Zhang <wenjia@linux.ibm.com> Reviewed-by:
Tony Lu <tonylu@linux.alibaba.com> Signed-off-by:
-
Wenjia Zhang authored
The following LOCKDEP was detected: Workqueue: events smc_lgr_free_work [smc] WARNING: possible circular locking dependency detected 6.1.0-20221027.rc2.git8.56bc5b569087.300.fc36.s390x+debug #1 Not tainted ------------------------------------------------------ kworker/3:0/176251 is trying to acquire lock: 00000000f1467148 ((wq_completion)smc_tx_wq-00000000#2){+.+.}-{0:0}, at: __flush_workqueue+0x7a/0x4f0 but task is already holding lock: 0000037fffe97dc8 ((work_completion)(&(&lgr->free_work)->work)){+.+.}-{0:0}, at: process_one_work+0x232/0x730 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #4 ((work_completion)(&(&lgr->free_work)->work)){+.+.}-{0:0}: __lock_acquire+0x58e/0xbd8 lock_acquire.part.0+0xe2/0x248 lock_acquire+0xac/0x1c8 __flush_work+0x76/0xf0 __cancel_work_timer+0x170/0x220 __smc_lgr_terminate.part.0+0x34/0x1c0 [smc] smc_connect_rdma+0x15e/0x418 [smc] __smc_connect+0x234/0x480 [smc] smc_connect+0x1d6/0x230 [smc] __sys_connect+0x90/0xc0 __do_sys_socketcall+0x186/0x370 __do_syscall+0x1da/0x208 system_call+0x82/0xb0 -> #3 (smc_client_lgr_pending){+.+.}-{3:3}: __lock_acquire+0x58e/0xbd8 lock_acquire.part.0+0xe2/0x248 lock_acquire+0xac/0x1c8 __mutex_lock+0x96/0x8e8 mutex_lock_nested+0x32/0x40 smc_connect_rdma+0xa4/0x418 [smc] __smc_connect+0x234/0x480 [smc] smc_connect+0x1d6/0x230 [smc] __sys_connect+0x90/0xc0 __do_sys_socketcall+0x186/0x370 __do_syscall+0x1da/0x208 system_call+0x82/0xb0 -> #2 (sk_lock-AF_SMC){+.+.}-{0:0}: __lock_acquire+0x58e/0xbd8 lock_acquire.part.0+0xe2/0x248 lock_acquire+0xac/0x1c8 lock_sock_nested+0x46/0xa8 smc_tx_work+0x34/0x50 [smc] process_one_work+0x30c/0x730 worker_thread+0x62/0x420 kthread+0x138/0x150 __ret_from_fork+0x3c/0x58 ret_from_fork+0xa/0x40 -> #1 ((work_completion)(&(&smc->conn.tx_work)->work)){+.+.}-{0:0}: __lock_acquire+0x58e/0xbd8 lock_acquire.part.0+0xe2/0x248 lock_acquire+0xac/0x1c8 process_one_work+0x2bc/0x730 worker_thread+0x62/0x420 kthread+0x138/0x150 __ret_from_fork+0x3c/0x58 ret_from_fork+0xa/0x40 -> #0 ((wq_completion)smc_tx_wq-00000000#2){+.+.}-{0:0}: check_prev_add+0xd8/0xe88 validate_chain+0x70c/0xb20 __lock_acquire+0x58e/0xbd8 lock_acquire.part.0+0xe2/0x248 lock_acquire+0xac/0x1c8 __flush_workqueue+0xaa/0x4f0 drain_workqueue+0xaa/0x158 destroy_workqueue+0x44/0x2d8 smc_lgr_free+0x9e/0xf8 [smc] process_one_work+0x30c/0x730 worker_thread+0x62/0x420 kthread+0x138/0x150 __ret_from_fork+0x3c/0x58 ret_from_fork+0xa/0x40 other info that might help us debug this: Chain exists of: (wq_completion)smc_tx_wq-00000000#2 --> smc_client_lgr_pending --> (work_completion)(&(&lgr->free_work)->work) Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock((work_completion)(&(&lgr->free_work)->work)); lock(smc_client_lgr_pending); lock((work_completion) (&(&lgr->free_work)->work)); lock((wq_completion)smc_tx_wq-00000000#2); *** DEADLOCK *** 2 locks held by kworker/3:0/176251: #0: 0000000080183548 ((wq_completion)events){+.+.}-{0:0}, at: process_one_work+0x232/0x730 #1: 0000037fffe97dc8 ((work_completion) (&(&lgr->free_work)->work)){+.+.}-{0:0}, at: process_one_work+0x232/0x730 stack backtrace: CPU: 3 PID: 176251 Comm: kworker/3:0 Not tainted Hardware name: IBM 8561 T01 701 (z/VM 7.2.0) Call Trace: [<000000002983c3e4>] dump_stack_lvl+0xac/0x100 [<0000000028b477ae>] check_noncircular+0x13e/0x160 [<0000000028b48808>] check_prev_add+0xd8/0xe88 [<0000000028b49cc4>] validate_chain+0x70c/0xb20 [<0000000028b4bd26>] __lock_acquire+0x58e/0xbd8 [<0000000028b4cf6a>] lock_acquire.part.0+0xe2/0x248 [<0000000028b4d17c>] lock_acquire+0xac/0x1c8 [<0000000028addaaa>] __flush_workqueue+0xaa/0x4f0 [<0000000028addf9a>] drain_workqueue+0xaa/0x158 [<0000000028ae303c>] destroy_workqueue+0x44/0x2d8 [<000003ff8029af26>] smc_lgr_free+0x9e/0xf8 [smc] [<0000000028adf3d4>] process_one_work+0x30c/0x730 [<0000000028adf85a>] worker_thread+0x62/0x420 [<0000000028aeac50>] kthread+0x138/0x150 [<0000000028a63914>] __ret_from_fork+0x3c/0x58 [<00000000298503da>] ret_from_fork+0xa/0x40 INFO: lockdep is turned off. =================================================================== This deadlock occurs because cancel_delayed_work_sync() waits for the work(&lgr->free_work) to finish, while the &lgr->free_work waits for the work(lgr->tx_wq), which needs the sk_lock-AF_SMC, that is already used under the mutex_lock. The solution is to use cancel_delayed_work() instead, which kills off a pending work. Fixes: a52bcc91 ("net/smc: improve termination processing") Signed-off-by:Jan Karcher <jaka@linux.ibm.com> Reviewed-by:
Karsten Graul <kgraul@linux.ibm.com> Reviewed-by:
-
Ido Schimmel authored
Spectrum ASICs have a configurable limit on how deep into the packet they parse. By default, the limit is 96 bytes. There are several cases where this parsing depth is not enough and there is a need to increase it. For example, timestamping of PTP packets and a FIB multipath hash policy that requires hashing on inner fields. The driver therefore maintains a reference count that reflects the number of consumers that require an increased parsing depth. During reload_down() the parsing depth reference count does not necessarily drop to zero, but the parsing depth itself is restored to the default during reload_up() when the firmware is reset. It is therefore possible to end up in situations where the driver thinks that the parsing depth was increased (reference count is non-zero), when it is not. Fix by making sure that all the consumers that increase the parsing depth reference count also decrease it during reload_down(). Specifically, make sure that when the routing code is de-initialized it drops the reference count if it was increased because of a FIB multipath hash policy that requires hashing on inner fields. Add a warning if the reference count is not zero after the driver was de-initialized and explicitly reset it to zero during initialization for good measures. Fixes: 2d91f080 ("mlxsw: spectrum: Add infrastructure for parsing configuration") Reported-by:
Maksym Yaremchuk <maksymy@nvidia.com> Signed-off-by:
Ido Schimmel <idosch@nvidia.com> Signed-off-by:
Petr Machata <petrm@nvidia.com> Link: https://lore.kernel.org/r/9c35e1b3e6c1d8f319a2449d14e2b86373f3b3ba.1678727526.git.petrm@nvidia.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Lorenzo Bianconi authored
Fix the following kernel warning in veth_set_xdp_features routine relying on rtnl_dereference() instead of on rcu_dereference(): ============================= WARNING: suspicious RCU usage 6.3.0-rc1-00144-g064d7052 #149 Not tainted ----------------------------- drivers/net/veth.c:1265 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by ip/135: (net/core/rtnetlink.c:6172) stack backtrace: CPU: 1 PID: 135 Comm: ip Not tainted 6.3.0-rc1-00144-g064d7052 #149 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:107) lockdep_rcu_suspicious (include/linux/context_tracking.h:152) veth_set_xdp_features (drivers/net/veth.c:1265 (discriminator 9)) veth_newlink (drivers/net/veth.c:1892) ? veth_set_features (drivers/net/veth.c:1774) ? kasan_save_stack (mm/kasan/common.c:47) ? kasan_save_stack (mm/kasan/common.c:46) ? kasan_set_track (mm/kasan/common.c:52) ? alloc_netdev_mqs (include/linux/slab.h:737) ? rcu_read_lock_sched_held (kernel/rcu/update.c:125) ? trace_kmalloc (include/trace/events/kmem.h:54) ? __xdp_rxq_info_reg (net/core/xdp.c:188) ? alloc_netdev_mqs (net/core/dev.c:10657) ? rtnl_create_link (net/core/rtnetlink.c:3312) rtnl_newlink_create (net/core/rtnetlink.c:3440) ? rtnl_link_get_net_capable.constprop.0 (net/core/rtnetlink.c:3391) __rtnl_newlink (net/core/rtnetlink.c:3657) ? lock_downgrade (kernel/locking/lockdep.c:5321) ? rtnl_link_unregister (net/core/rtnetlink.c:3487) rtnl_newlink (net/core/rtnetlink.c:3671) rtnetlink_rcv_msg (net/core/rtnetlink.c:6174) ? rtnl_link_fill (net/core/rtnetlink.c:6070) ? mark_usage (kernel/locking/lockdep.c:4914) ? mark_usage (kernel/locking/lockdep.c:4914) netlink_rcv_skb (net/netlink/af_netlink.c:2574) ? rtnl_link_fill (net/core/rtnetlink.c:6070) ? netlink_ack (net/netlink/af_netlink.c:2551) ? lock_acquire (kernel/locking/lockdep.c:467) ? net_generic (include/linux/rcupdate.h:805) ? netlink_deliver_tap (include/linux/rcupdate.h:805) netlink_unicast (net/netlink/af_netlink.c:1340) ? netlink_attachskb (net/netlink/af_netlink.c:1350) netlink_sendmsg (net/netlink/af_netlink.c:1942) ? netlink_unicast (net/netlink/af_netlink.c:1861) ? netlink_unicast (net/netlink/af_netlink.c:1861) sock_sendmsg (net/socket.c:727) ____sys_sendmsg (net/socket.c:2501) ? kernel_sendmsg (net/socket.c:2448) ? __copy_msghdr (net/socket.c:2428) ___sys_sendmsg (net/socket.c:2557) ? mark_usage (kernel/locking/lockdep.c:4914) ? do_recvmmsg (net/socket.c:2544) ? lock_acquire (kernel/locking/lockdep.c:467) ? find_held_lock (kernel/locking/lockdep.c:5159) ? __lock_release (kernel/locking/lockdep.c:5345) ? __might_fault (mm/memory.c:5625) ? lock_downgrade (kernel/locking/lockdep.c:5321) ? __fget_light (include/linux/atomic/atomic-arch-fallback.h:227) __sys_sendmsg (include/linux/file.h:31) ? __sys_sendmsg_sock (net/socket.c:2572) ? rseq_get_rseq_cs (kernel/rseq.c:275) ? lockdep_hardirqs_on_prepare.part.0 (kernel/locking/lockdep.c:4263) do_syscall_64 (arch/x86/entry/common.c:50) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120) RIP: 0033:0x7f0d1aadeb17 Code: 0f 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b9 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10 Fixes: fccca038 ("veth: take into account device reconfiguration for xdp_features flag") Suggested-by:
Eric Dumazet <edumazet@google.com> Reported-by:
Matthieu Baerts <matthieu.baerts@tessares.net> Link: https://lore.kernel.org/netdev/cover.1678364612.git.lorenzo@kernel.org/T/#me4c9d8e985ec7ebee981cfdb5bc5ec651ef4035dSigned-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Reported-by: syzbot+c3d0d9c42d59ff644ea6@syzkaller.appspotmail.com Reviewed-by:
-
Zheng Wang authored
This bug influences both st_nci_i2c_remove and st_nci_spi_remove. Take st_nci_i2c_remove as an example. In st_nci_i2c_probe, it called ndlc_probe and bound &ndlc->sm_work with llt_ndlc_sm_work. When it calls ndlc_recv or timeout handler, it will finally call schedule_work to start the work. When we call st_nci_i2c_remove to remove the driver, there may be a sequence as follows: Fix it by finishing the work before cleanup in ndlc_remove CPU0 CPU1 |llt_ndlc_sm_work st_nci_i2c_remove | ndlc_remove | st_nci_remove | nci_free_device| kfree(ndev) | //free ndlc->ndev | |llt_ndlc_rcv_queue |nci_recv_frame |//use ndlc->ndev Fixes: 35630df6 ("NFC: st21nfcb: Add driver for STMicroelectronics ST21NFCB NFC chip") Signed-off-by:Zheng Wang <zyytlz.wz@163.com> Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230312160837.2040857-1-zyytlz.wz@163.comSigned-off-by:
-
Jakub Kicinski authored
Kuniyuki Iwashima says: ==================== tcp: Fix bind() regression for dual-stack wildcard address. The first patch fixes the regression reported in [0], and the second patch adds a test for similar cases to catch future regression. [0]: https://lore.kernel.org/netdev/e21bf153-80b0-9ec0-15ba-e04a4ad42c34@redhat.com/ ==================== Link: https://lore.kernel.org/r/20230312031904.4674-1-kuniyu@amazon.comSigned-off-by:
-
Kuniyuki Iwashima authored
The test checks if (IPv4, IPv6) address pair properly conflict or not. * IPv4 * 0.0.0.0 * 127.0.0.1 * IPv6 * :: * ::1 If the IPv6 address is [::], the second bind() always fails. Signed-off-by:Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by:
-
Kuniyuki Iwashima authored
Paul Holzinger reported [0] that commit 5456262d ("net: Fix incorrect address comparison when searching for a bind2 bucket") introduced a bind() regression. Paul also gave a nice repro that calls two types of bind() on the same port, both of which now succeed, but the second call should fail: bind(fd1, ::, port) + bind(fd2, 127.0.0.1, port) The cited commit added address family tests in three functions to fix the uninit-value KMSAN report. [1] However, the test added to inet_bind2_bucket_match_addr_any() removed a necessary conflict check; the dual-stack wildcard address no longer conflicts with an IPv4 non-wildcard address. If tb->family is AF_INET6 and sk->sk_family is AF_INET in inet_bind2_bucket_match_addr_any(), we still need to check if tb has the dual-stack wildcard address. Note that the IPv4 wildcard address does not conflict with IPv6 non-wildcard addresses. [0]: https://lore.kernel.org/netdev/e21bf153-80b0-9ec0-15ba-e04a4ad42c34@redhat.com/ [1]: https://lore.kernel.org/netdev/CAG_fn=Ud3zSW7AZWXc+asfMhZVL5ETnvuY44Pmyv4NPv-ijN-A@mail.gmail.com/ Fixes: 5456262d ("net: Fix incorrect address comparison when searching for a bind2 bucket") Signed-off-by:
Paul Holzinger <pholzing@redhat.com> Link: https://lore.kernel.org/netdev/CAG_fn=Ud3zSW7AZWXc+asfMhZVL5ETnvuY44Pmyv4NPv-ijN-A@mail.gmail.com/Reviewed-by:
Martin KaFai Lau <martin.lau@kernel.org> Signed-off-by:
-
Heiner Kallweit authored
If genphy_read_status fails then further access to the PHY may result in unpredictable behavior. To prevent this bail out immediately if genphy_read_status fails. Fixes: 4223dbff ("net: phy: smsc: Re-enable EDPD mode for LAN87xx") Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by:
Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/026aa4f2-36f5-1c10-ab9f-cdb17dda6ac4@gmail.comSigned-off-by:
-
Eric Dumazet authored
IP tunnels can apparently update dev->needed_headroom in their xmit path. This patch takes care of three tunnels xmit, and also the core LL_RESERVED_SPACE() and LL_RESERVED_SPACE_EXTRA() helpers. More changes might be needed for completeness. BUG: KCSAN: data-race in ip_tunnel_xmit / ip_tunnel_xmit read to 0xffff88815b9da0ec of 2 bytes by task 888 on cpu 1: ip_tunnel_xmit+0x1270/0x1730 net/ipv4/ip_tunnel.c:803 __gre_xmit net/ipv4/ip_gre.c:469 [inline] ipgre_xmit+0x516/0x570 net/ipv4/ip_gre.c:661 __netdev_start_xmit include/linux/netdevice.h:4881 [inline] netdev_start_xmit include/linux/netdevice.h:4895 [inline] xmit_one net/core/dev.c:3580 [inline] dev_hard_start_xmit+0x127/0x400 net/core/dev.c:3596 __dev_queue_xmit+0x1007/0x1eb0 net/core/dev.c:4246 dev_queue_xmit include/linux/netdevice.h:3051 [inline] neigh_direct_output+0x17/0x20 net/core/neighbour.c:1623 neigh_output include/net/neighbour.h:546 [inline] ip_finish_output2+0x740/0x840 net/ipv4/ip_output.c:228 ip_finish_output+0xf4/0x240 net/ipv4/ip_output.c:316 NF_HOOK_COND include/linux/netfilter.h:291 [inline] ip_output+0xe5/0x1b0 net/ipv4/ip_output.c:430 dst_output include/net/dst.h:444 [inline] ip_local_out+0x64/0x80 net/ipv4/ip_output.c:126 iptunnel_xmit+0x34a/0x4b0 net/ipv4/ip_tunnel_core.c:82 ip_tunnel_xmit+0x1451/0x1730 net/ipv4/ip_tunnel.c:813 __gre_xmit net/ipv4/ip_gre.c:469 [inline] ipgre_xmit+0x516/0x570 net/ipv4/ip_gre.c:661 __netdev_start_xmit include/linux/netdevice.h:4881 [inline] netdev_start_xmit include/linux/netdevice.h:4895 [inline] xmit_one net/core/dev.c:3580 [inline] dev_hard_start_xmit+0x127/0x400 net/core/dev.c:3596 __dev_queue_xmit+0x1007/0x1eb0 net/core/dev.c:4246 dev_queue_xmit include/linux/netdevice.h:3051 [inline] neigh_direct_output+0x17/0x20 net/core/neighbour.c:1623 neigh_output include/net/neighbour.h:546 [inline] ip_finish_output2+0x740/0x840 net/ipv4/ip_output.c:228 ip_finish_output+0xf4/0x240 net/ipv4/ip_output.c:316 NF_HOOK_COND include/linux/netfilter.h:291 [inline] ip_output+0xe5/0x1b0 net/ipv4/ip_output.c:430 dst_output include/net/dst.h:444 [inline] ip_local_out+0x64/0x80 net/ipv4/ip_output.c:126 iptunnel_xmit+0x34a/0x4b0 net/ipv4/ip_tunnel_core.c:82 ip_tunnel_xmit+0x1451/0x1730 net/ipv4/ip_tunnel.c:813 __gre_xmit net/ipv4/ip_gre.c:469 [inline] ipgre_xmit+0x516/0x570 net/ipv4/ip_gre.c:661 __netdev_start_xmit include/linux/netdevice.h:4881 [inline] netdev_start_xmit include/linux/netdevice.h:4895 [inline] xmit_one net/core/dev.c:3580 [inline] dev_hard_start_xmit+0x127/0x400 net/core/dev.c:3596 __dev_queue_xmit+0x1007/0x1eb0 net/core/dev.c:4246 dev_queue_xmit include/linux/netdevice.h:3051 [inline] neigh_direct_output+0x17/0x20 net/core/neighbour.c:1623 neigh_output include/net/neighbour.h:546 [inline] ip_finish_output2+0x740/0x840 net/ipv4/ip_output.c:228 ip_finish_output+0xf4/0x240 net/ipv4/ip_output.c:316 NF_HOOK_COND include/linux/netfilter.h:291 [inline] ip_output+0xe5/0x1b0 net/ipv4/ip_output.c:430 dst_output include/net/dst.h:444 [inline] ip_local_out+0x64/0x80 net/ipv4/ip_output.c:126 iptunnel_xmit+0x34a/0x4b0 net/ipv4/ip_tunnel_core.c:82 ip_tunnel_xmit+0x1451/0x1730 net/ipv4/ip_tunnel.c:813 __gre_xmit net/ipv4/ip_gre.c:469 [inline] ipgre_xmit+0x516/0x570 net/ipv4/ip_gre.c:661 __netdev_start_xmit include/linux/netdevice.h:4881 [inline] netdev_start_xmit include/linux/netdevice.h:4895 [inline] xmit_one net/core/dev.c:3580 [inline] dev_hard_start_xmit+0x127/0x400 net/core/dev.c:3596 __dev_queue_xmit+0x1007/0x1eb0 net/core/dev.c:4246 dev_queue_xmit include/linux/netdevice.h:3051 [inline] neigh_direct_output+0x17/0x20 net/core/neighbour.c:1623 neigh_output include/net/neighbour.h:546 [inline] ip_finish_output2+0x740/0x840 net/ipv4/ip_output.c:228 ip_finish_output+0xf4/0x240 net/ipv4/ip_output.c:316 NF_HOOK_COND include/linux/netfilter.h:291 [inline] ip_output+0xe5/0x1b0 net/ipv4/ip_output.c:430 dst_output include/net/dst.h:444 [inline] ip_local_out+0x64/0x80 net/ipv4/ip_output.c:126 iptunnel_xmit+0x34a/0x4b0 net/ipv4/ip_tunnel_core.c:82 ip_tunnel_xmit+0x1451/0x1730 net/ipv4/ip_tunnel.c:813 __gre_xmit net/ipv4/ip_gre.c:469 [inline] ipgre_xmit+0x516/0x570 net/ipv4/ip_gre.c:661 __netdev_start_xmit include/linux/netdevice.h:4881 [inline] netdev_start_xmit include/linux/netdevice.h:4895 [inline] xmit_one net/core/dev.c:3580 [inline] dev_hard_start_xmit+0x127/0x400 net/core/dev.c:3596 __dev_queue_xmit+0x1007/0x1eb0 net/core/dev.c:4246 dev_queue_xmit include/linux/netdevice.h:3051 [inline] neigh_direct_output+0x17/0x20 net/core/neighbour.c:1623 neigh_output include/net/neighbour.h:546 [inline] ip_finish_output2+0x740/0x840 net/ipv4/ip_output.c:228 ip_finish_output+0xf4/0x240 net/ipv4/ip_output.c:316 NF_HOOK_COND include/linux/netfilter.h:291 [inline] ip_output+0xe5/0x1b0 net/ipv4/ip_output.c:430 dst_output include/net/dst.h:444 [inline] ip_local_out+0x64/0x80 net/ipv4/ip_output.c:126 iptunnel_xmit+0x34a/0x4b0 net/ipv4/ip_tunnel_core.c:82 ip_tunnel_xmit+0x1451/0x1730 net/ipv4/ip_tunnel.c:813 __gre_xmit net/ipv4/ip_gre.c:469 [inline] ipgre_xmit+0x516/0x570 net/ipv4/ip_gre.c:661 __netdev_start_xmit include/linux/netdevice.h:4881 [inline] netdev_start_xmit include/linux/netdevice.h:4895 [inline] xmit_one net/core/dev.c:3580 [inline] dev_hard_start_xmit+0x127/0x400 net/core/dev.c:3596 __dev_queue_xmit+0x1007/0x1eb0 net/core/dev.c:4246 dev_queue_xmit include/linux/netdevice.h:3051 [inline] neigh_direct_output+0x17/0x20 net/core/neighbour.c:1623 neigh_output include/net/neighbour.h:546 [inline] ip_finish_output2+0x740/0x840 net/ipv4/ip_output.c:228 ip_finish_output+0xf4/0x240 net/ipv4/ip_output.c:316 NF_HOOK_COND include/linux/netfilter.h:291 [inline] ip_output+0xe5/0x1b0 net/ipv4/ip_output.c:430 dst_output include/net/dst.h:444 [inline] ip_local_out+0x64/0x80 net/ipv4/ip_output.c:126 iptunnel_xmit+0x34a/0x4b0 net/ipv4/ip_tunnel_core.c:82 ip_tunnel_xmit+0x1451/0x1730 net/ipv4/ip_tunnel.c:813 __gre_xmit net/ipv4/ip_gre.c:469 [inline] ipgre_xmit+0x516/0x570 net/ipv4/ip_gre.c:661 __netdev_start_xmit include/linux/netdevice.h:4881 [inline] netdev_start_xmit include/linux/netdevice.h:4895 [inline] xmit_one net/core/dev.c:3580 [inline] dev_hard_start_xmit+0x127/0x400 net/core/dev.c:3596 __dev_queue_xmit+0x1007/0x1eb0 net/core/dev.c:4246 write to 0xffff88815b9da0ec of 2 bytes by task 2379 on cpu 0: ip_tunnel_xmit+0x1294/0x1730 net/ipv4/ip_tunnel.c:804 __gre_xmit net/ipv4/ip_gre.c:469 [inline] ipgre_xmit+0x516/0x570 net/ipv4/ip_gre.c:661 __netdev_start_xmit include/linux/netdevice.h:4881 [inline] netdev_start_xmit include/linux/netdevice.h:4895 [inline] xmit_one net/core/dev.c:3580 [inline] dev_hard_start_xmit+0x127/0x400 net/core/dev.c:3596 __dev_queue_xmit+0x1007/0x1eb0 net/core/dev.c:4246 dev_queue_xmit include/linux/netdevice.h:3051 [inline] neigh_direct_output+0x17/0x20 net/core/neighbour.c:1623 neigh_output include/net/neighbour.h:546 [inline] ip6_finish_output2+0x9bc/0xc50 net/ipv6/ip6_output.c:134 __ip6_finish_output net/ipv6/ip6_output.c:195 [inline] ip6_finish_output+0x39a/0x4e0 net/ipv6/ip6_output.c:206 NF_HOOK_COND include/linux/netfilter.h:291 [inline] ip6_output+0xeb/0x220 net/ipv6/ip6_output.c:227 dst_output include/net/dst.h:444 [inline] NF_HOOK include/linux/netfilter.h:302 [inline] mld_sendpack+0x438/0x6a0 net/ipv6/mcast.c:1820 mld_send_cr net/ipv6/mcast.c:2121 [inline] mld_ifc_work+0x519/0x7b0 net/ipv6/mcast.c:2653 process_one_work+0x3e6/0x750 kernel/workqueue.c:2390 worker_thread+0x5f2/0xa10 kernel/workqueue.c:2537 kthread+0x1ac/0x1e0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:308 value changed: 0x0dd4 -> 0x0e14 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 2379 Comm: kworker/0:0 Not tainted 6.3.0-rc1-syzkaller-00002-g8ca09d5f-dirty #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/02/2023 Workqueue: mld mld_ifc_work Fixes: 8eb30be0 ("ipv6: Create ip6_tnl_xmit") Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
-
Dave Ertman authored
RDMA is not supported in ice on a PF that has been added to a bonded interface. To enforce this, when an interface enters a bond, we unplug the auxiliary device that supports RDMA functionality. This unplug currently happens in the context of handling the netdev bonding event. This event is sent to the ice driver under RTNL context. This is causing a deadlock where the RDMA driver is waiting for the RTNL lock to complete the removal. Defer the unplugging/re-plugging of the auxiliary device to the service task so that it is not performed under the RTNL lock context. Cc: stable@vger.kernel.org # 6.1.x Reported-by:
Jaroslav Pulchart <jaroslav.pulchart@gooddata.com> Link: https://lore.kernel.org/netdev/CAK8fFZ6A_Gphw_3-QMGKEFQk=sfCw1Qmq0TVZK3rtAi7vb621A@mail.gmail.com/ Fixes: 5cb1ebdb ("ice: Fix race condition during interface enslave") Fixes: 4eace75e ("RDMA/irdma: Report the correct link speed") Signed-off-by:
Dave Ertman <david.m.ertman@intel.com> Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel) Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by:
Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/20230310194833.3074601-1-anthony.l.nguyen@intel.comSigned-off-by:
-
- 14 Mar, 2023 4 commits
-
-
Kristian Overskeid authored
If no frames has been exchanged with a node for HSR_NODE_FORGET_TIME, the node will be deleted from the node_db list. If a frame is sent to the node after it is deleted, a netdev_err message for each slave interface is produced. This should not happen with dan nodes because of supervision frames, but can happen often with san nodes, which clutters the kernel log. Since the hsr protocol does not support sans, this is only relevant for the prp protocol. Signed-off-by:
Kristian Overskeid <koverskeid@gmail.com> Signed-off-by:
-
Alex Elder authored
A recent commit eliminated a hack that adjusted the offset used for many GSI registers. It became possible because we now specify all GSI register offsets explicitly for every version of IPA. Unfortunately, a large number of register offsets were *not* updated as they should have been in that commit. For IPA v4.5+, the offset for every GSI register *except* the two inter-EE interrupt masking registers were supposed to have been reduced by 0xd000. Tested-by:
Luca Weiss <luca.weiss@fairphone.com> Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # SM8350-HDK Fixes: 59b12b1d ("net: ipa: kill gsi->virt_raw") Signed-off-by:
Alex Elder <elder@linaro.org> Link: https://lore.kernel.org/r/20230310193709.1477102-1-elder@linaro.orgSigned-off-by:
-
Arınç ÜNAL authored
As my testing on the MCM MT7530 switch on MT7621 SoC shows, setting the PLL frequency does not affect MII modes other than trgmii on port 5 and port 6. So the assumption is that the operation here called "setting the PLL frequency" actually sets the frequency of the TRGMII TX clock. Make it so that it and the rest of the trgmii setup run only when the trgmii mode is used. Tested rgmii and trgmii modes of port 6 on MCM MT7530 on MT7621AT Unielec U7621-06 and standalone MT7530 on MT7623NI Bananapi BPI-R2. Fixes: b8f126a8 ("net-next: dsa: add dsa support for Mediatek MT7530 switch") Tested-by:
Arınç ÜNAL <arinc.unal@arinc9.com> Signed-off-by:
-
Arınç ÜNAL authored
Remove now incorrect comment regarding port 5 as GMAC5. This is supposed to be supported since commit 38f790a8 ("net: dsa: mt7530: Add support for port 5") under mt7530_setup_port5(). Fixes: 38f790a8 ("net: dsa: mt7530: Add support for port 5") Signed-off-by:
-
- 13 Mar, 2023 3 commits
-
-
Daniil Tatianin authored
Previously we would divide total_left_rate by zero if num_vports happened to be 1 because non_requested_count is calculated as num_vports - req_count. Guard against this by validating num_vports at the beginning and returning an error otherwise. Found by Linux Verification Center (linuxtesting.org) with the SVACE static analysis tool. Fixes: bcd197c8 ("qed: Add vport WFQ configuration APIs") Signed-off-by:
Daniil Tatianin <d-tatianin@yandex-team.ru> Reviewed-by:
-
D. Wythe authored
When performing a stress test on SMC-R by rmmod mlx5_ib driver during the wrk/nginx test, we found that there is a probability of triggering a panic while terminating all link groups. This issue dues to the race between smc_smcr_terminate_all() and smc_buf_create(). smc_smcr_terminate_all smc_buf_create /* init */ conn->sndbuf_desc = NULL; ... __smc_lgr_terminate smc_conn_kill smc_close_abort smc_cdc_get_slot_and_msg_send __softirqentry_text_start smc_wr_tx_process_cqe smc_cdc_tx_handler READ(conn->sndbuf_desc->len); /* panic dues to NULL sndbuf_desc */ conn->sndbuf_desc = xxx; This patch tries to fix the issue by always to check the sndbuf_desc before send any cdc msg, to make sure that no null pointer is seen during cqe processing. Fixes: 0b29ec64 ("net/smc: immediate termination for SMCR link groups") Signed-off-by:
D. Wythe <alibuda@linux.alibaba.com> Reviewed-by:
-
Vadim Fedorenko authored
When using a PHC in shared between multiple hosts, the previous frequency value may not be reset and could lead to host being unable to compensate the offset with timecounter adjustments. To avoid such state reset the hardware frequency of PHC to zero on init. Some refactoring is needed to make code readable. Fixes: 85036aee ("bnxt_en: Add a non-real time mode to access NIC clock") Signed-off-by:
Vadim Fedorenko <vadfed@meta.com> Reviewed-by:
Pavan Chebbi <pavan.chebbi@broadcom.com> Link: https://lore.kernel.org/r/20230310151356.678059-1-vadfed@meta.comSigned-off-by:
-
- 11 Mar, 2023 17 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nfJakub Kicinski authored
Pablo Neira Ayuso says: ==================== Netfilter fixes for net 1) nft_parse_register_load() gets an incorrect datatype size as input, from Jeremy Sowden. 2) incorrect maximum netlink attribute in nft_redir, also from Jeremy. * git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: nft_redir: correct value of inet type `.maxattrs` netfilter: nft_redir: correct length for loading protocol registers netfilter: nft_masq: correct length for loading protocol registers netfilter: nft_nat: correct length for loading protocol registers ==================== Link: https://lore.kernel.org/r/20230309174655.69816-1-pablo@netfilter.orgSigned-off-by:
-
Jakub Kicinski authored
Matthieu Baerts says: ==================== mptcp: fixes for 6.3 Patch 1 fixes a possible deadlock in subflow_error_report() reported by lockdep. The report was in fact a false positive but the modification makes sense and silences lockdep to allow syzkaller to find real issues. The regression has been introduced in v5.12. Patch 2 is a refactoring needed to be able to fix the two next issues. It improves the situation and can be backported up to v6.0. Patches 3 and 4 fix UaF reported by KASAN. It fixes issues potentially visible since v5.7 and v5.19 but only reproducible until recently (v6.0). These two patches depend on patch 2/7. Patch 5 fixes the order of the printed values: expected vs seen values. The regression has been introduced recently: v6.3-rc1. Patch 6 adds missing ro_after_init flags. A previous patch added them for other functions but these two have been missed. This previous patch has been backported to stable versions (up to v5.12) so probably better to do the same here. Patch 7 fixes tcp_set_state() being called twice in a row since v5.10. Patch 8 fixes another lockdep false positive issue but this time in MPTCP PM code. Same here, some modifications in the code has been made to silence this issue and help finding real ones later. This issue can be seen since v6.2. v1: https://lore.kernel.org/r/20230227-upstream-net-20230227-mptcp-fixes-v1-0-070e30ae4a8e@tessares.net ==================== Link: https://lore.kernel.org/r/20230227-upstream-net-20230227-mptcp-fixes-v2-0-47c2e95eada9@tessares.netSigned-off-by:
-
Paolo Abeni authored
Christoph reports a lockdep splat in the mptcp_subflow_create_socket() error path, when such function is invoked by mptcp_pm_nl_create_listen_socket(). Such code path acquires two separates, nested socket lock, with the internal lock operation lacking the "nested" annotation. Adding that in sock_release() for mptcp's sake only could be confusing. Instead just add a new lockclass to the in-kernel msk socket, re-initializing the lockdep infra after the socket creation. Fixes: ad217100 ("mptcp: fix locking for in-kernel listener creation") Cc: stable@vger.kernel.org Reported-by:
Christoph Paasch <cpaasch@apple.com> Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/354Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Reviewed-by:
-
Matthieu Baerts authored
tcp_set_state() is called from tcp_done() already. There is then no need to first set the state to TCP_CLOSE, then call tcp_done(). Fixes: d5824847 ("mptcp: fix fallback for MP_JOIN subflows") Cc: stable@vger.kernel.org Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/362Acked-by:
-
Geliang Tang authored
Add __ro_after_init labels for the variables tcp_prot_override and tcpv6_prot_override, just like other variables adjacent to them, to indicate that they are initialised from the init hooks and no writes occur afterwards. Fixes: b19bc294 ("mptcp: implement delegated actions") Cc: stable@vger.kernel.org Fixes: 51fa7f8e ("mptcp: mark ops structures as ro_after_init") Signed-off-by:
Geliang Tang <geliang.tang@suse.com> Reviewed-by:
-
Matthieu Baerts authored
In case of errors, the printed message had the expected and the seen value inverted. This patch simply correct the order: first the expected value, then the one that has been seen. Fixes: 10d42734 ("selftests: mptcp: userspace: print error details if any") Cc: stable@vger.kernel.org Acked-by:
-
Paolo Abeni authored
As reported by Christoph after having refactored the passive socket initialization, the mptcp listener shutdown path is prone to an UaF issue. BUG: KASAN: use-after-free in _raw_spin_lock_bh+0x73/0xe0 Write of size 4 at addr ffff88810cb23098 by task syz-executor731/1266 CPU: 1 PID: 1266 Comm: syz-executor731 Not tainted 6.2.0-rc59af4eaa31c1f6c00c8f1e448ed99a45c66340dd5 #6 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x6e/0x91 print_report+0x16a/0x46f kasan_report+0xad/0x130 kasan_check_range+0x14a/0x1a0 _raw_spin_lock_bh+0x73/0xe0 subflow_error_report+0x6d/0x110 sk_error_report+0x3b/0x190 tcp_disconnect+0x138c/0x1aa0 inet_child_forget+0x6f/0x2e0 inet_csk_listen_stop+0x209/0x1060 __mptcp_close_ssk+0x52d/0x610 mptcp_destroy_common+0x165/0x640 mptcp_destroy+0x13/0x80 __mptcp_destroy_sock+0xe7/0x270 __mptcp_close+0x70e/0x9b0 mptcp_close+0x2b/0x150 inet_release+0xe9/0x1f0 __sock_release+0xd2/0x280 sock_close+0x15/0x20 __fput+0x252/0xa20 task_work_run+0x169/0x250 exit_to_user_mode_prepare+0x113/0x120 syscall_exit_to_user_mode+0x1d/0x40 do_syscall_64+0x48/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc The msk grace period can legitly expire in between the last reference count dropped in mptcp_subflow_queue_clean() and the later eventual access in inet_csk_listen_stop() After the previous patch we don't need anymore special-casing msk listener socket cleanup: the mptcp worker will process each of the unaccepted msk sockets. Just drop the now unnecessary code. Please note this commit depends on the two parent ones: mptcp: refactor passive socket initialization mptcp: use the workqueue to destroy unaccepted sockets Fixes: 6aeed904 ("mptcp: fix race on unaccepted mptcp sockets") Cc: stable@vger.kernel.org Reported-and-tested-by:
-
Paolo Abeni authored
Christoph reported a UaF at token lookup time after having refactored the passive socket initialization part: BUG: KASAN: use-after-free in __token_bucket_busy+0x253/0x260 Read of size 4 at addr ffff88810698d5b0 by task syz-executor653/3198 CPU: 1 PID: 3198 Comm: syz-executor653 Not tainted 6.2.0-rc59af4eaa31c1f6c00c8f1e448ed99a45c66340dd5 #6 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x6e/0x91 print_report+0x16a/0x46f kasan_report+0xad/0x130 __token_bucket_busy+0x253/0x260 mptcp_token_new_connect+0x13d/0x490 mptcp_connect+0x4ed/0x860 __inet_stream_connect+0x80e/0xd90 tcp_sendmsg_fastopen+0x3ce/0x710 mptcp_sendmsg+0xff1/0x1a20 inet_sendmsg+0x11d/0x140 __sys_sendto+0x405/0x490 __x64_sys_sendto+0xdc/0x1b0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc We need to properly clean-up all the paired MPTCP-level resources and be sure to release the msk last, even when the unaccepted subflow is destroyed by the TCP internals via inet_child_forget(). We can re-use the existing MPTCP_WORK_CLOSE_SUBFLOW infra, explicitly checking that for the critical scenario: the closed subflow is the MPC one, the msk is not accepted and eventually going through full cleanup. With such change, __mptcp_destroy_sock() is always called on msk sockets, even on accepted ones. We don't need anymore to transiently drop one sk reference at msk clone time. Please note this commit depends on the parent one: mptcp: refactor passive socket initialization Fixes: 58b09919 ("mptcp: create msk early") Cc: stable@vger.kernel.org Reported-and-tested-by:
-
Paolo Abeni authored
After commit 30e51b92 ("mptcp: fix unreleased socket in accept queue") unaccepted msk sockets go throu complete shutdown, we don't need anymore to delay inserting the first subflow into the subflow lists. The reference counting deserve some extra care, as __mptcp_close() is unaware of the request socket linkage to the first subflow. Please note that this is more a refactoring than a fix but because this modification is needed to include other corrections, see the following commits. Then a Fixes tag has been added here to help the stable team. Fixes: 30e51b92 ("mptcp: fix unreleased socket in accept queue") Cc: stable@vger.kernel.org Signed-off-by:
-
Paolo Abeni authored
Christoph reported a possible deadlock while the TCP stack destroys an unaccepted subflow due to an incoming reset: the MPTCP socket error path tries to acquire the msk-level socket lock while TCP still owns the listener socket accept queue spinlock, and the reverse dependency already exists in the TCP stack. Note that the above is actually a lockdep false positive, as the chain involves two separate sockets. A different per-socket lockdep key will address the issue, but such a change will be quite invasive. Instead, we can simply stop earlier the socket error handling for orphaned or unaccepted subflows, breaking the critical lockdep chain. Error handling in such a scenario is a no-op. Reported-and-tested-by:
-
Jakub Kicinski authored
Lorenzo Bianconi says: ==================== update xdp_features flag according to NIC re-configuration Changes since v1: - rebase on top of net tree - remove NETDEV_XDP_ACT_NDO_XMIT_SG support in mlx5e driver - always enable NETDEV_XDP_ACT_NDO_XMIT support in mlx5e driver ==================== Link: https://lore.kernel.org/r/cover.1678364612.git.lorenzo@kernel.orgSigned-off-by:
-
Matteo Croce authored
XDP is supported only if enough queues are present, so when reconfiguring the queues set xdp_features accordingly. Fixes: 66c0e13a ("drivers: net: turn on XDP features") Suggested-by:
Matteo Croce <teknoraver@meta.com> Signed-off-by:
-
Lorenzo Bianconi authored
Take into account LRO and GRO configuration setting device xdp_features flag. Consider channel rq_wq_type enabling rx scatter-gatter support in xdp_features flag and disable NETDEV_XDP_ACT_NDO_XMIT_SG since it is not supported yet by the driver. Moreover always enable NETDEV_XDP_ACT_NDO_XMIT as the ndo_xdp_xmit callback does not require to load a dummy xdp program on the NIC. Fixes: 66c0e13a ("drivers: net: turn on XDP features") Co-developed-by:
Tariq Toukan <tariqt@nvidia.com> Signed-off-by:
-
Lorenzo Bianconi authored
Take into account tx/rx queues reconfiguration setting device xdp_features flag. Moreover consider NETIF_F_GRO flag in order to enable ndo_xdp_xmit callback. Fixes: 66c0e13a ("drivers: net: turn on XDP features") Signed-off-by:
-
Lorenzo Bianconi authored
ena nic allows xdp just if enough hw queues are available for XDP. Take into account queues configuration setting xdp_features. Fixes: 66c0e13a ("drivers: net: turn on XDP features") Reviewed-by:
Shay Agroskin <shayagr@amazon.com> Signed-off-by:
-
Lorenzo Bianconi authored
thunderx nic allows xdp just if enough hw queues are available for XDP. Take into account queues configuration setting xdp_features. Fixes: 66c0e13a ("drivers: net: turn on XDP features") Signed-off-by:
-
Lorenzo Bianconi authored
Introduce xdp_set_features_flag utility routine in order to update dynamically xdp_features according to the dynamic hw configuration via ethtool (e.g. changing number of hw rx/tx queues). Add xdp_clear_features_flag() in order to clear all xdp_feature flag. Reviewed-by:
-
