This reverts commit 2b5a30ca ("ASoC: SOF: Intel: MTL: Enable
DMI L1").

It came to our attention that the access to the EM2 register is restricted
to the DSP side on MTL compared to prior platforms.

Writing to it from the host side has no effect (negative or positive), it
is better to remove the code to not cause confusion and wrong impression.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230310133454.15362-1-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add support for Steam Deck bios old properties. If a Steam deck didn't
upgrade the BIOS, the driver should be able to handle the previous
properties for shared boost types.
Signed-off-by: Lucas Tanure <lucas.tanure@collabora.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230309140051.945329-1-lucas.tanure@collabora.comSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:

This series introduces an abstraction of the HDA DAI handling.

The motivation is to simplify and make the code more flexible regarding to IPC
versions, new features (ChainDMA (IPC4) and DSPless mode) and to pave the way for new
platforms.

For the first look the series might feels a bit too intrusive but it introduces
no functionality change (tested at each commit).

The assigned timeslot masks are 64bit values.
In case of 64 timeslots the code uses (1 << 64) which is undefined on a
64bit value. On the PowerPC architecture, this lead to an incorrect
result as (1 << 64) produces the same result as (1 << 0).

Fix the masks values taking care of the 64 timeslots case.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Link: https://lore.kernel.org/r/167819855177.26.11163930602844526001@mailman-core.alsa-project.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Remove the unneeded and unused #fsl,serial-cells property.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Link: https://lore.kernel.org/r/20230307141503.159766-3-herve.codina@bootlin.comSigned-off-by: Mark Brown <broonie@kernel.org>

Remove the unneeded and unused #fsl,chan-cells property.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Link: https://lore.kernel.org/r/20230307141503.159766-2-herve.codina@bootlin.comSigned-off-by: Mark Brown <broonie@kernel.org>

Enable cont_update_posn variable to  update host position
in streambox for every dma copy.
Signed-off-by: V sujith kumar Reddy <Vsujithkumar.Reddy@amd.com>
Link: https://lore.kernel.org/r/20230308084509.1496256-3-Vsujithkumar.Reddy@amd.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add pcm pointer callback for amd platforms to read host position
update from stream box.
Signed-off-by: V sujith kumar Reddy <Vsujithkumar.Reddy@amd.com>
Link: https://lore.kernel.org/r/20230308084509.1496256-2-Vsujithkumar.Reddy@amd.comSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:

The following series will add support for handling the core_id token which is
needed for supporting multiple cores with complex topologies.

The DAI widget is freed during FE DAI hw_free and therefore the DAI
config during BE DAI hw_free is redundant.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230307140435.2808-15-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Remove these functions and reuse hda_dai_config().
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230307140435.2808-14-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Define the post_trigger DMA op for IPC3 and unify the DAI driver ops for
IPC3 and IPC4 for HDA DAI's.

Also, use the post_trigger op to stop the paused streams properly in the
hda_dai_suspend() function. This fixes the suspend while paused case for
IPC4 because previously we weren't resetting the pipeline when suspending
the system with some paused streams.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230307140435.2808-13-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Define and use the SOF widget's DMA pre_trigger/trigger/post_trigger ops in
ipc4_hda_dai_trigger().
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230307140435.2808-12-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Use the topology IPC dai_config to update the dai_config for
HDA DAI widgets.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230307140435.2808-11-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Define and use the setup_hext_stream/reset_hext_stream DMA ops during link
hw_params and cleanup.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230307140435.2808-10-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Define and set the get_hext_stream, assign_hext_stream and
release_hext_stream DMA ops for HDA DAIs.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230307140435.2808-9-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Introduce a new ops structure for HDA DAI widget DMA ops and add a new
field to struct snd_sof_dai that will be used to set the ops pointer for
DAI widgets.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230307140435.2808-8-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

No need to define a new variable and look it up again.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230307140435.2808-7-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Pass the CPU DAI pointer from the ASoC core to hda_link_dma_hw_params() and
ipc3_hda_dai_trigger(). This will avoid looking up the CPU DAI pointer
multiple times.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230307140435.2808-6-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Remove the trigger_suspend_stop argument from hda_link_dma_cleanup() and
move the call to snd_hdac_ext_stream_clear() into
snd_hdac_ext_stream_clear(). This is a preparatory step to unify the
trigger ops for IPC3 and IPC4.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230307140435.2808-5-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Remove the struct definition and use the params argument directly.
Also, use the hlink pointer to set the stream ID instead of looking it
up again.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230307140435.2808-4-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

No code change. Just code move from hda_link_dma_params() to
hda_link_dma_hw_params().
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230307140435.2808-3-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Now that the DAI_CONFIG IPC is sent after widget setup and before widget
free, there is no need for the BE DAI DRV ops that do the same thing. So
remove them.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230307140435.2808-2-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

If the DSP firmware has crashed, some log messages may be pending in the
mtrace buffer, but not consumed by the driver as no IPC notification has
been sent by the firmware. Check the buffer status for all mtrace slots
and ensure any pending log messages are processed before DSP is possibly
powered down and the log buffer contents is lost.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230307110846.2265-1-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

A copier blob will be only used when a copier is connected in the
topology. An ALH copier in playback direction that doesn't have any
source means the copier is not connected in the topology. Thus, we
don't need to allocate the blob.
The patch doesn't do the same test before freeing the blob because
the blob is null and it is fine to free null.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230307110830.2178-1-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

The Host Power Management/Clock Control (ULP) Registers in
the HDA BAR shadow the values of the same registers in the DSP BAR,
so let's modify the latter - as done already for other accesses.
Signed-off-by: Yong Zhi <yong.zhi@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230307095251.3058-1-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Update code to remove mix between legacy and SOF definitions. No
functionality change.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230307095158.2818-1-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Prefixs are unneeded since log level explains the same information
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230307115018.5588-1-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add core token in extended token list for each module to support multi-core
feature.
Signed-off-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Chao Song <chao.song@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230307123556.31328-4-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Token SOF_TKN_SCHED_CORE in topology file can specify the target core for
the pipeline, if it is missing it is going to be 0 (as it is right now).

Firmware will double-check all information retrieved by topology and
report errors if required. This will allow policy and changes in
topologies without a need for a synchronized kernel change.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20230307123556.31328-3-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

The create pipeline message can carry the target code_id which is set to
0 at the moment.

Add macros to set the core_id in the message extension.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20230307123556.31328-2-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series from Lucas Tanure <lucas.tanure@collabora.com>:

Valve's Steam Deck uses CS35L41 in shared boost mode, where both speakers
share the boost circuit.
Add this support in the shared lib, but for now, shared boost is not
supported in HDA systems as would require BIOS changes.

Based on David Rhodes shared boost patches.

Also, fix boost config overwriting in IRQ found in the review and do a
small refactor of the code.

soc-core.c is using dev_dbg(), but some of them are useless.
It indicates many dev_dbg() at snd_soc_runtime_get_dai_fmt(),
but all of them are just noise, almost no meanings.

dev_dbg() on soc_probe_link_dais() indicates dai link and its
loop order, but it is just noise, no information.

dev_dbg() on snd_soc_register_dai() is duplicated.

This patch cleanup these.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87ttyy64cy.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series from Lucas Tanure <lucas.tanure@collabora.com>:

Provide small fixes and refactor the code for easier insertion of a new
platform using the same acp5x machine driver.

Merge series from richard.leitner@linux.dev:

This series adds support for the clocks properties in the
maxim,max9867 bindings. Furthermore the binding definitions are
converted from txt to yaml.

The clock property is needed to define the mclk for one of our
boards which uses the the i.MX8MP SAI MCLK as clock for the
maxim,max9867.

Merge series from Kamel Bouhara <kamel.bouhara@bootlin.com>:

This small series extends the tas571x driver to support the TAS5733
audio power amplifier.

Merge series from Claudiu Beznea <claudiu.beznea@microchip.com>:

This series does some cleanups for Microchip AT91 sound drivers.  Along
with it I took the chance and updated MAINTAINERS file.

Merge series from Prabhakar <prabhakar.csengg@gmail.com>:

Hi All,

This patch series aims to fix interrupt numbers for SSI channels and updates
the DT binding and the driver accordingly.

Note, this patch series applies on top of [0].

[0] https://patchwork.kernel.org/project/linux-renesas-soc/cover/20230131223529.11905-1-prabhakar.mahadev-lad.rj@bp.renesas.com/

Cheers,
Prabhakar

Lad Prabhakar (4):
  ASoC: dt-bindings: renesas,rz-ssi: Update interrupts and
    interrupt-names properties
  ASoC: sh: rz-ssi: Update interrupt handling for half duplex channels
  arm64: dts: renesas: r9a07g044: Update IRQ numbers for SSI channels
  arm64: dts: renesas: r9a07g043: Update IRQ numbers for SSI channels

 .../bindings/sound/renesas,rz-ssi.yaml        | 21 ++++---
 arch/arm64/boot/dts/renesas/r9a07g043.dtsi    | 19 +++---
 arch/arm64/boot/dts/renesas/r9a07g044.dtsi    | 19 +++---
 sound/soc/sh/rz-ssi.c                         | 63 +++++++++++++------
 4 files changed, 70 insertions(+), 52 deletions(-)

--
2.25.1

Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:

The first patch will improve the managing of DMI L1 by tracking it's
enabled/disabled state to avoid unconditional changes to it's state.

The remaining two patch will enable the DMI L1 for MTL platforms (ACE 1.0)

Merge series from Herve Codina <herve.codina@bootlin.com>:

This series adds support for audio using the QMC controller available in
some Freescale PowerQUICC SoCs.

This series contains three parts in order to show the different blocks
hierarchy and their usage in this support.

The first one is related to TSA (Time Slot Assigner).
The TSA handles the data present at the pin level (TDM with up to 64
time slots) and dispatchs them to one or more serial controller (SCC).

The second is related to QMC (QUICC Multichannel Controller).
The QMC handles the data at the serial controller (SCC) level and splits
again the data to creates some virtual channels.

The last one is related to the audio component (QMC audio).
It is the glue between the QMC controller and the ASoC component. It
handles one or more QMC virtual channels and creates one DAI per QMC
virtual channels handled.