- 01 Mar, 2016 40 commits
-
-
Gal Pressman authored
If CQ moderation is not supported by the device, print a warning on netdevice load, and return error when trying to modify/query cq moderation via ethtool. Fixes: f62b8bb8 ('net/mlx5: Extend mlx5_core to support ConnectX-4 Ethernet functionality') Signed-off-by:
Gal Pressman <galp@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Tariq Toukan authored
By its role, there is no need to set all the other parameters for the drop RQ. Signed-off-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
-
Tariq Toukan authored
For data cache locality considerations, we moved the nop and csum_offload_inner within sq_stats struct as they are more commonly accessed in xmit path. Signed-off-by:
-
Tariq Toukan authored
Instead of the pair (channel, tc), we now use a single number that goes over all tx queues of a TC, for all TCs. Signed-off-by:
-
Tariq Toukan authored
More proper to declare carrier state UP only after the channels are ready for traffic. Signed-off-by:
-
Tariq Toukan authored
We only need to flush the irq handler to make sure it does not queue a work into the global work queue after we start to flush it. So using synchronize_irq() is more appropriate than a spin lock. Signed-off-by:
-
David Ahern authored
Commit f1705ec1 allows IPv6 addresses to be retained on a link down. The address can have a cached host route which can point to the wrong FIB table if the L3 enslavement is changed (e.g., route can point to local table instead of VRF table if device is added to an L3 domain). On link up check the table of the cached host route against the FIB table associated with the device and correct if needed. Signed-off-by:
David Ahern <dsa@cumulusnetworks.com> Signed-off-by:
-
David S. Miller authored
Deepa Dinamani says: ==================== Convert network timestamps to be y2038 safe Introduction: The series is aimed at transitioning network timestamps to being y2038 safe. All patches can be reviewed and merged independently. Socket timestamps and ioctl calls will be handled separately. Thanks to Arnd Bergmann for discussing solution options with me. Solution: Data type struct timespec is not y2038 safe. Replace timespec with struct timespec64 which is y2038 safe. Changes v1 -> v2: Move and rename inet_current_time() as discussed Squash patches 1 and 2 Reword commit text for patch 2/3 Carry over review tags ==================== Signed-off-by: -
Deepa Dinamani authored
SCTP probe log timestamps use struct timespec which is not y2038 safe. Use struct timespec64 which is 2038 safe instead. Use monotonic time instead of real time as only time differences are logged. Signed-off-by:
Deepa Dinamani <deepa.kernel@gmail.com> Reviewed-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Cc: Vlad Yasevich <vyasevich@gmail.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: linux-sctp@vger.kernel.org Signed-off-by:
-
Deepa Dinamani authored
TCP probe log timestamps use struct timespec which is not y2038 safe. Even though timespec might be good enough here as it is used to represent delta time, the plan is to get rid of all uses of timespec in the kernel. Replace with struct timespec64 which is y2038 safe. Prints still use unsigned long format and type. Signed-off-by:
YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by:
-
Deepa Dinamani authored
ICMP timestamp messages and IP source route options require timestamps to be in milliseconds modulo 24 hours from midnight UT format. Add inet_current_timestamp() function to support this. The function returns the required timestamp in network byte order. Timestamp calculation is also changed to call ktime_get_real_ts64() which uses struct timespec64. struct timespec64 is y2038 safe. Previously it called getnstimeofday() which uses struct timespec. struct timespec is not y2038 safe. Signed-off-by:
-
David S. Miller authored
Jamal Hadi Salim says: ==================== net_sched: Add support for IFE action As agreed at netconf in Seville, here's the patch finally (1 year was just too long to wait for an ethertype. Now we are just going have the user configure one). Described in netdev01 paper: "Distributing Linux Traffic Control Classifier-Action Subsystem" Authors: Jamal Hadi Salim and Damascene M. Joachimpillai The original motivation and deployment of this work was to horizontally scale packet processing at scope of a chasis or rack. This means one could take a tc policy and split it across machines connected over L2. The paper refers to this as "pipeline stage indexing". Other use cases which evolved out of the original intent include but are not limited to carrying OAM information, carrying exception handling metadata, carrying programmed authentication and authorization information, encapsulating programmed compliance information, service IDs etc. Read the referenced paper for more details. The architecture allows for incremental updates for new metadatum support to cover different use cases. This patch set includes support for basic skb metadatum. Followup patches will have more examples of metadata and other features. v4 changes: Integrate more feedback from Cong v3 changes: Integrate with the new namespace changes Remove skbhash and queue mapping metadata (but keep their claim for ids) Integrate feedback from Cong Integrate feedback from Daniel v2 changes: Remove module option for an upper bound of metadata Integrate feedback from Cong Integrate feedback from Daniel ==================== Signed-off-by: -
Jamal Hadi Salim authored
Example usage: Set the skb priority using skbedit then allow it to be encoded sudo tc qdisc add dev $ETH root handle 1: prio sudo tc filter add dev $ETH parent 1: protocol ip prio 10 \ u32 match ip protocol 1 0xff flowid 1:2 \ action skbedit prio 17 \ action ife encode \ allow prio \ dst 02:15:15:15:15:15 Note: You dont need the skbedit action if you are already encoding the skb priority earlier. A zero skb priority will not be sent Alternative hard code static priority of decimal 33 (unlike skbedit) then mark of 0x12 every time the filter matches sudo $TC filter add dev $ETH parent 1: protocol ip prio 10 \ u32 match ip protocol 1 0xff flowid 1:2 \ action ife encode \ type 0xDEAD \ use prio 33 \ use mark 0x12 \ dst 02:15:15:15:15:15 Signed-off-by:Jamal Hadi Salim <jhs@mojatatu.com> Acked-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Jamal Hadi Salim authored
Example usage: Set the skb using skbedit then allow it to be encoded sudo tc qdisc add dev $ETH root handle 1: prio sudo tc filter add dev $ETH parent 1: protocol ip prio 10 \ u32 match ip protocol 1 0xff flowid 1:2 \ action skbedit mark 17 \ action ife encode \ allow mark \ dst 02:15:15:15:15:15 Note: You dont need the skbedit action if you are already encoding the skb mark earlier. A zero skb mark, when seen, will not be encoded. Alternative hard code static mark of 0x12 every time the filter matches sudo $TC filter add dev $ETH parent 1: protocol ip prio 10 \ u32 match ip protocol 1 0xff flowid 1:2 \ action ife encode \ type 0xDEAD \ use mark 0x12 \ dst 02:15:15:15:15:15 Signed-off-by:
-
Jamal Hadi Salim authored
This action allows for a sending side to encapsulate arbitrary metadata which is decapsulated by the receiving end. The sender runs in encoding mode and the receiver in decode mode. Both sender and receiver must specify the same ethertype. At some point we hope to have a registered ethertype and we'll then provide a default so the user doesnt have to specify it. For now we enforce the user specify it. Lets show example usage where we encode icmp from a sender towards a receiver with an skbmark of 17; both sender and receiver use ethertype of 0xdead to interop. YYYY: Lets start with Receiver-side policy config: xxx: add an ingress qdisc sudo tc qdisc add dev $ETH ingress xxx: any packets with ethertype 0xdead will be subjected to ife decoding xxx: we then restart the classification so we can match on icmp at prio 3 sudo $TC filter add dev $ETH parent ffff: prio 2 protocol 0xdead \ u32 match u32 0 0 flowid 1:1 \ action ife decode reclassify xxx: on restarting the classification from above if it was an icmp xxx: packet, then match it here and continue to the next rule at prio 4 xxx: which will match based on skb mark of 17 sudo tc filter add dev $ETH parent ffff: prio 3 protocol ip \ u32 match ip protocol 1 0xff flowid 1:1 \ action continue xxx: match on skbmark of 0x11 (decimal 17) and accept sudo tc filter add dev $ETH parent ffff: prio 4 protocol ip \ handle 0x11 fw flowid 1:1 \ action ok xxx: Lets show the decoding policy sudo tc -s filter ls dev $ETH parent ffff: protocol 0xdead xxx: filter pref 2 u32 filter pref 2 u32 fh 800: ht divisor 1 filter pref 2 u32 fh 800::800 order 2048 key ht 800 bkt 0 flowid 1:1 (rule hit 0 success 0) match 00000000/00000000 at 0 (success 0 ) action order 1: ife decode action reclassify index 1 ref 1 bind 1 installed 14 sec used 14 sec type: 0x0 Metadata: allow mark allow hash allow prio allow qmap Action statistics: Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 xxx: Observe that above lists all metadatum it can decode. Typically these submodules will already be compiled into a monolithic kernel or loaded as modules YYYY: Lets show the sender side now .. xxx: Add an egress qdisc on the sender netdev sudo tc qdisc add dev $ETH root handle 1: prio xxx: xxx: Match all icmp packets to 192.168.122.237/24, then xxx: tag the packet with skb mark of decimal 17, then xxx: Encode it with: xxx: ethertype 0xdead xxx: add skb->mark to whitelist of metadatum to send xxx: rewrite target dst MAC address to 02:15:15:15:15:15 xxx: sudo $TC filter add dev $ETH parent 1: protocol ip prio 10 u32 \ match ip dst 192.168.122.237/24 \ match ip protocol 1 0xff \ flowid 1:2 \ action skbedit mark 17 \ action ife encode \ type 0xDEAD \ allow mark \ dst 02:15:15:15:15:15 xxx: Lets show the encoding policy sudo tc -s filter ls dev $ETH parent 1: protocol ip xxx: filter pref 10 u32 filter pref 10 u32 fh 800: ht divisor 1 filter pref 10 u32 fh 800::800 order 2048 key ht 800 bkt 0 flowid 1:2 (rule hit 0 success 0) match c0a87aed/ffffffff at 16 (success 0 ) match 00010000/00ff0000 at 8 (success 0 ) action order 1: skbedit mark 17 index 6 ref 1 bind 1 Action statistics: Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 action order 2: ife encode action pipe index 3 ref 1 bind 1 dst MAC: 02:15:15:15:15:15 type: 0xDEAD Metadata: allow mark Action statistics: Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 xxx: test by sending ping from sender to destination Signed-off-by: -
David S. Miller authored
Merge tag 'mac80211-next-for-davem-2016-02-26' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== Here's another round of updates for -next: * big A-MSDU RX performance improvement (avoid linearize of paged RX) * rfkill changes: cleanups, documentation, platform properties * basic PBSS support in cfg80211 * MU-MIMO action frame processing support * BlockAck reordering & duplicate detection offload support * various cleanups & little fixes ==================== Signed-off-by:
-
David S. Miller authored
Nikolay Aleksandrov says: ==================== bridge: mcast: add support for temp router port This set adds support for temporary router port which doesn't depend only on the incoming queries. It can be refreshed by setting multicast_router to the same value (3). The first two patches are minor changes that prepare the code for the third which adds this new type of router port. In order to be able to dump its information the mdb router port format is changed in patch 04 and extended similar to how mdb entries format was done recently. The related iproute2 changes will be posted if this is accepted. v2: set val first and adjust router type later in patch 01, patch 03 was split in 2 ==================== Signed-off-by: -
Nikolay Aleksandrov authored
Allow for more multicast router port information to be dumped such as timer and type attributes. For that that purpose we need to extend the MDBA_ROUTER_PORT attribute similar to how it was done for the mdb entries recently. The new format is thus: [MDBA_ROUTER_PORT] = { <- nested attribute u32 ifindex <- router port ifindex for user-space compatibility [MDBA_ROUTER_PATTR attributes] } This way it remains compatible with older users (they'll simply retrieve the u32 in the beginning) and new users can parse the remaining attributes. It would also allow to add future extensions to the router port without breaking compatibility. Signed-off-by:Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
-
Nikolay Aleksandrov authored
Add support for a temporary router port which doesn't depend only on the incoming query. It can be refreshed if set to the same value, which is a no-op for the rest. Signed-off-by:
-
Nikolay Aleksandrov authored
This is needed for the upcoming temporary port router. There's no point to go through the logic if the value is the same. Signed-off-by:
-
Nikolay Aleksandrov authored
Using raw values makes it difficult to extend and also understand the code, give them names and do explicit per-option manipulation in br_multicast_set_port_router. Signed-off-by:
-
David S. Miller authored
Vivien Didelot says: ==================== net: dsa: mv88e6xxx: implement VLAN filtering This patchset fixes hardware bridging for non 802.1Q aware systems. The mv88e6xxx DSA driver currently depends on CONFIG_VLAN_8021Q and CONFIG_BRIDGE_VLAN_FILTERING enabled for correct bridging between switch ports. Patch 1/9 adds support for the VLAN filtering switchdev attribute in DSA. Patchs 2/9 and 3/9 add helper functions for the following patches. Patchs 4/9 to 6/9 assign dynamic address databases to VLANs, ports, and bridge groups (the lowest available FID is cleared and assigned), and thus restore support for per-port FDB operations. Patchs 7/9 to 9/9 refine ports isolation and setup 802.1Q on user demand. With this patchset, ports get correctly bridged and the driver behaves as expected, with or without 802.1Q support. With CONFIG_VLAN_8021Q enabled, setting a default PVID to the bridge correctly propagates the corresponding VLAN, in addition to the hardware bridging: # echo 42 > /sys/class/net/<bridge>/bridge/default_pvid But considering CONFIG_BRIDGE_VLAN_FILTERING enabled, the hardware VLAN filtering is enabled on all bridge members only when the user requests it: # echo 1 > /sys/class/net/<bridge>/bridge/vlan_filtering ==================== Signed-off-by: -
Vivien Didelot authored
Implement port_vlan_filtering in the driver to toggle the related port 802.1Q mode between DISABLED and SECURE, on user request. Signed-off-by:
Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by:
-
Vivien Didelot authored
Now that ports isolation is correctly configured when joining or leaving a bridge, there is no need to rely on reserved VLANs to isolate unbridged ports anymore. Thus remove them, and disable 802.1Q on setup. This restores the expected behavior of hardware bridging for systems without 802.1Q or VLAN filtering enabled. Signed-off-by:
-
Vivien Didelot authored
The In Chip Port Based VLAN Table contains bits used to restrict which output ports this input port can send frames to. With the VLAN filtering enabled, these tables work in conjunction with the VLAN Table Unit to allow egressing frames. In order to remove the current dependency to BRIDGE_VLAN_FILTERING for basic hardware bridging to work, it is necessary to restore a fine control of each port's VLANTable, on setup and when a port joins or leaves a bridge. Signed-off-by:
-
Vivien Didelot authored
Give a new bridge a fresh FDB, assign it to its members, and restore a fresh FDB to a port leaving a bridge. Signed-off-by:
-
Vivien Didelot authored
Restore per-port FDB. Assign them on setup, allow adding and deleting addresses into them, and dump them. Signed-off-by:
-
Vivien Didelot authored
Add a _mv88e6xxx_fid_new function which gives and flushes the lowest FID available. Call it when preparing a new VTU entry. Signed-off-by:
-
Vivien Didelot authored
Move out the code which dumps a single FDB to its own function. Signed-off-by:
-
Vivien Didelot authored
Rename _mv88e6xxx_vlan_init in _mv88e6xxx_vtu_new, eventually called from a new _mv88e6xxx_vtu_get function, which abstracts the VTU GetNext VID-1 trick to retrieve a single entry. Signed-off-by:
-
Vivien Didelot authored
When a user explicitly requests VLAN filtering with something like: # echo 1 > /sys/class/net/<bridge>/bridge/vlan_filtering Switchdev propagates a SWITCHDEV_ATTR_ID_BRIDGE_VLAN_FILTERING port attribute. Add support for it in the DSA layer with a new port_vlan_filtering function to let drivers toggle 802.1Q filtering on user demand. Signed-off-by: -
David S. Miller authored
Jiri Pirko says: ==================== Introduce devlink interface and first drivers to use it There a is need for some userspace API that would allow to expose things that are not directly related to any device class like net_device of ib_device, but rather chip-wide/switch-ASIC-wide stuff. Use cases: 1) get/set of port type (Ethernet/InfiniBand) 2) setting up port splitters - split port into multiple ones and squash again, enables usage of splitter cable 3) setting up shared buffers - shared among multiple ports within one chip (work in progress) 4) configuration of switch wide properties - resources division etc - This will allow to pass configuration that is unacceptable to be passed as a module option. First patch of this set introduces a new generic Netlink based interface, called "devlink". It is similar to nl80211 model and it is heavily influenced by it, including the API definition. The devlink introduction patch implements use cases 1) and 2). Other 2 are in development atm and will be addressed by follow-ups. It is very convenient for drivers to use devlink, as you can see in other patches in this set. Counterpart for devlink is userspace tool for now called "dl". Command line interface and outputs are derived from "ip" tool so it should be easy for users to get used to it. It is available here as a standalone tool for now: https://github.com/jpirko/devlink After this is merge in kernel, I will include the "dl" or "devlink" tool into iproute2 toolset. Port type setting example: myhost:~$ dl help Usage: dl [ OPTIONS ] OBJECT { COMMAND | help } where OBJECT := { dev | port | monitor } OPTIONS := { -v/--verbose } myhost:~$ dl dev help Usage: dl dev show [DEV] myhost:~$ dl dev show pci/0000:01:00.0 myhost:~$ dl port help Usage: dl port show [DEV/PORT_INDEX] Usage: dl port set DEV/PORT_INDEX [ type { eth | ib | auto} ] Usage: dl port split DEV/PORT_INDEX count Usage: dl port unsplit DEV/PORT_INDEX myhost:~$ dl port show pci/0000:01:00.0/1: type ib ibdev mlx4_0 pci/0000:01:00.0/2: type ib ibdev mlx4_0 myhost:~$ sudo dl port set pci/0000:01:00.0/1 type eth myhost:~$ dl port show pci/0000:01:00.0/1: type eth netdev ens4 pci/0000:01:00.0/2: type ib ibdev mlx4_0 myhost:~$ sudo dl port set ens4 type auto myhost:~$ dl port show pci/0000:01:00.0/1: type eth(auto) netdev ens4 pci/0000:01:00.0/2: type ib ibdev mlx4_0 Port splitting example: myswitch:~$ sudo modprobe mlxsw_pci myswitch:~$ dl port pci/0000:03:00.0/1: type eth netdev eth0 pci/0000:03:00.0/3: type eth netdev eth1 pci/0000:03:00.0/5: type eth netdev eth2 ... pci/0000:03:00.0/63: type eth netdev eth31 myswitch:~$ sudo dl port split pci/0000:03:00.0/1 2 (or "sudo dl port split eth0 2") myswitch:~$ dl port pci/0000:03:00.0/3: type eth netdev eth1 pci/0000:03:00.0/5: type eth netdev eth2 ... pci/0000:03:00.0/63: type eth netdev eth31 pci/0000:03:00.0/1: type eth netdev eth0 split_group 16 pci/0000:03:00.0/2: type eth netdev eth32 split_group 16 myswitch:~$ sudo dl port unsplit pci/0000:03:00.0/1 myswitch:~$ dl port pci/0000:03:00.0/3: type eth netdev eth1 pci/0000:03:00.0/5: type eth netdev eth2 pci/0000:03:00.0/63: type eth netdev eth31 pci/0000:03:00.0/1: type eth netdev eth0 v2->v3: patch 1/9 -removed generated devlink index and name, use bus name and dev name as a handle for all userspace originated commands. Along with that, remove sysfs stub. Requested by Hannes Sowa. patch 2/9 -add dev param to devlink_register (api change) patch 4/9 -add dev param to devlink_register (api change) patch 9/9 -set port's speed according to width fix by Ido v1->v2: patch 1/9 -removed no longer used "devlink_dev" helper -fix couple of typos and misspells patch 4/9: -removed SET_NETDEV_DEV set to devlink dev ==================== Signed-off-by:
-
Ido Schimmel authored
Allow a user to split or unsplit a port using the newly introduced devlink ops. Once split, the original netdev is destroyed and 2 or 4 others are created, according to user configuration. The new ports are like any other port, with the sole difference of supporting a lower maximum speed. When unsplit, the reverse process takes place. Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Ido Schimmel authored
When splitting and unsplitting we'll destroy usable ports on the fly, so mark them using a NULL pointer to indicate that their local port number is free and can be re-used. Signed-off-by:
-
Ido Schimmel authored
The port netdevs are each associated with a different local port number in the device. These local ports are grouped into groups of 4 (e.g. (1-4), (5-8)) called clusters. The cluster constitutes the one of two possible modules they can be mapped to. This mapping is board-specific and done by the device's firmware during init. When splitting a port by 4, the device requires us to first unmap all the ports in the cluster and then map each to a single lane in the module associated with the port netdev used as the handle for the operation. This means that two port netdevs will disappear, as only 100Gb/s (4 lanes) ports can be split and we are guaranteed to have two of these ((1, 3), (5, 7) etc.) in a cluster. When unsplit occurs we need to reinstantiate the two original 100Gb/s ports and map each to its origianl module. Therefore, during driver init store the initial local port to module mapping, so it can be used later during unsplitting. Note that a by 2 split doesn't require us to store the mapping, as we only need to reinstantiate one port whose module is known. Signed-off-by:
-
Ido Schimmel authored
When splitting a port we replace it with 2 or 4 other ports. To be able to do that we need to remove the original port netdev and unmap it from its module. However, we first mark it as disabled, as active ports cannot be unmapped. Signed-off-by:
-
Jiri Pirko authored
Add middle layer in mlxsw core code to forward port split/unsplit calls into specific ASIC drivers. Signed-off-by:
-
Jiri Pirko authored
Implement newly introduced devlink interface. Add devlink port instances for every port and set the port types accordingly. Signed-off-by:
-
Jiri Pirko authored
So far, there has been an mlx4-specific sysfs file allowing user to change port type to either Ethernet of InfiniBand. This is very inconvenient. Allow to expose the same ability to set port type in a generic way using devlink interface. Signed-off-by:
-
Jiri Pirko authored
Implement newly introduced devlink interface. Add devlink port instances for every port and set the port types accordingly. Signed-off-by:
-
