- 09 May, 2019 3 commits
-
-
Maarten Lankhorst authored
Requested for backmerging airlied's drm-legacy cleanup. Signed-off-by:Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
-
Dave Airlie authored
Merge tag 'drm-misc-next-fixes-2019-05-08' of git://anongit.freedesktop.org/drm/drm-misc into drm-next - A handful of fixes from -next that just missed feature freeze - More panfrost fixes that went directly in -misc-next-fixes (various) - Fix searchpaths during build (Masahiro) - msm patch to fix the driver for chips without zap shader (Rob) - Fix freeing imported buffers in drm_gem_cma_free_object() (Noralf) Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Rob Clark <robdclark@chromium.org> Cc: Noralf Trønnes <noralf@tronnes.org> Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Sean Paul <sean@poorly.run> Link: https://patchwork.freedesktop.org/patch/msgid/20190508205153.GA91135@art_vandelay
-
git://linux-arm.org/linux-ldDave Airlie authored
This is the 2nd pull request for the malidp-next. The new patches add additional support for Arm Mali D71 so that it can now be enabled correctly and brought up on any SoC that contains the IP. From now on we will start focusing on adding writeback, scaling and other useful features to bring the driver to the same level of maturity as mali-dp. Signed-off-by:
-
- 08 May, 2019 2 commits
-
-
Rob Clark authored
Depending on platform firmware, a zap shader may not be required to take the GPU out of secure mode on boot, in which case we can just write RBBM_SECVID_TRUST_CNTL directly. Which we *mostly* handled, but missed clearing 'ret' resulting that hw_init() returned an error on these devices. Fixes: abccb9fe ("drm/msm/a6xx: Add zap shader load") Acked-by:
Jordan Crouse <jcrouse@codeaurora.org> Reviewed-by:
Sean Paul <sean@poorly.run> Signed-off-by:
Rob Clark <robdclark@chromium.org> Signed-off-by:
Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190508130726.27557-1-robdclark@gmail.com
-
Noralf Trønnes authored
The logic for freeing an imported buffer with a virtual address is broken. It will free the buffer instead of unmapping the dma buf. Fix by reversing the if ladder and first check if the buffer is imported. Fixes: b9068cde ("drm/cma-helper: Add DRM_GEM_CMA_VMAP_DRIVER_OPS") Cc: stable@vger.kernel.org Reported-by:
"Li, Tingqian" <tingqian.li@intel.com> Signed-off-by:
Noralf Trønnes <noralf@tronnes.org> Reviewed-by:
Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190426124753.53722-1-noralf@tronnes.org
-
- 07 May, 2019 10 commits
-
-
Jagan Teki authored
HD702E lcd is FriendlyELEC developed eDP LCD panel with 800x1280 resolution. It has built in Goodix, GT9271 captive touchscreen with backlight adjustable via PWM. Add support for it. Signed-off-by:
Jagan Teki <jagan@amarulasolutions.com> Reviewed-by:
Rob Herring <robh@kernel.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190507130708.11255-2-jagan@amarulasolutions.com
-
Jagan Teki authored
HD702E lcd is FriendlyELEC developed eDP LCD panel with 800x1280 resolution. It has built in Goodix, GT9271 captive touchscreen with backlight adjustable via PWM. Add dt-bindings documentation for it. Signed-off-by:
-
Mario Kleiner authored
As discussed with Nicholas and Daniel Vetter (patchwork link to discussion below), the VRR timestamping behaviour produced utterly useless and bogus vblank/pageflip timestamps. We have found a way to fix this and provide sane behaviour. As of Linux 5.2, the amdgpu driver will be able to provide exactly the same vblank / pageflip timestamp semantic in variable refresh rate mode as in standard fixed refresh rate mode. This is achieved by deferring core vblank handling (drm_crtc_handle_vblank()) until the end of front porch, and also defer the sending of pageflip completion events until end of front porch, when we can safely compute correct pageflip/vblank timestamps. The same approach will be possible for other VRR capable kms drivers, so we can actually have sane and useful timestamps in VRR mode. This patch removes the section of the docs that describes the broken timestamp behaviour present in Linux 5.0/5.1. Fixes: ab7a664f ("drm: Document variable refresh properties") Link: https://patchwork.freedesktop.org/patch/285333/Acked-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by:
Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by:
Mario Kleiner <mario.kleiner.de@gmail.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190418060157.18968-1-mario.kleiner.de@gmail.com Cc: stable@vger.kernel.org
-
Fix the kbuild test rebot reported warnings: - symbol was not declared. Should it be static? - missing braces around initializer Depends on: - https://patchwork.freedesktop.org/series/58976/Reported-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
james qian wang (Arm Technology China) <james.qian.wang@arm.com> Signed-off-by:
Liviu Dudau <liviu.dudau@arm.com>
-
Fixed the warnings: Function parameter or member 'xxx' not described when make htmldocs This patch depends on: - https://patchwork.freedesktop.org/series/54448/ - https://patchwork.freedesktop.org/series/54449/ - https://patchwork.freedesktop.org/series/54450/ v2: Rebase and add reporter Reported-by:
-
CHIP set bus_width according to the HW configuration, and CORE will use it as buffer alignment. v2: Rebase Signed-off-by:
-
Add two sysfs node: core_id, config_id, user can read them to fetch the HW product information. Also, use memset to initialize config_id, rather than quirky C syntax. Courtesy of Nathan Chancellor <natechancellor@gmail.com>. Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> [Merged Nathan's patch that uses memset to initialize config_id into original patch as the fixes tag changed due to rebase, reworded the commit to reference the merged patch] Signed-off-by:
-
Daniel Vetter authored
It's mandatory and considered core state since ioctls rely on this working. Thanks to Laurent for pointing out this gap. v2: Clarify to "atomic drivers" only. Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Sean Paul <sean@poorly.run> Acked-by:
Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190506144629.5976-1-daniel.vetter@ffwll.ch
-
Jagadeesh Pagadala authored
Remove duplicate headers which are included twice. Signed-off-by:
Jagadeesh Pagadala <jagdsh.linux@gmail.com> Acked-by:
Rob Clark <robdclark@gmail.com> Acked-by:
Dave Airlie <airlied@linux.ie> [danvet: drop changes to panel-raspberrypi, they break the build] Signed-off-by:
-
Andres Rodriguez authored
Add vendor/product pairs for the Valve Index HMDs. Signed-off-by:
Andres Rodriguez <andresx7@gmail.com> Cc: Dave Airlie <airlied@redhat.com> Cc: <stable@vger.kernel.org> # v4.15 Signed-off-by:
-
- 06 May, 2019 10 commits
-
-
https://git.pengutronix.de/git/lst/linuxDave Airlie authored
things are still slow in etnaviv land, so we don't have anything major to destage. Just a couple of non-critical fixes that I want to land in 5.2. Signed-off-by:
-
Robert Foss authored
virtio_gpu_fence_emit() always returns 0, since it has no error paths. Consequently no calls for virtio_gpu_fence_emit() use the return value, and it can be removed. Signed-off-by:
Robert Foss <robert.foss@collabora.com> Reviewed-by:
Chia-I Wu <olvaffe@gmail.com> Link: http://patchwork.freedesktop.org/patch/msgid/20190506091034.30289-1-robert.foss@collabora.comSuggested-by:
Emil Velikov <emil.velikov@collabora.com> Reviewed-by:
Gerd Hoffmann <kraxel@redhat.com>
-
Jani Nikula authored
Continue to get rid of drmP.h. Add minimal includes to build. Sort includes while at it. Reviewed-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190506095248.20874-2-jani.nikula@intel.com
-
Jani Nikula authored
Continue to get rid of drmP.h. Add minimal includes to build. Sort includes while at it. Reviewed-by:
-
Chia-I Wu authored
It was changed to GFP_ATOMIC in commit ec2f0577 (add & use virtio_gpu_queue_fenced_ctrl_buffer) because the allocation happened with a spinlock held. That was no longer true after commit 9fdd90c0 (add virtio_gpu_alloc_fence()). Signed-off-by:
-
Chia-I Wu authored
Trace when commands are queued for both ctrlq and cursorq. Trace when responses are received for ctrlq. Signed-off-by:
-
Chia-I Wu authored
For most drivers, drm_fence_init is followed by drm_fence_emit immediately. But for our driver, they are done separately. We also don't know the fence seqno until drm_fence_emit. Signed-off-by:
-
Chia-I Wu authored
This is motivated by having meaningful ftrace events, but it also fixes use cases where dma_fence_is_later is called, such as in sync_file_merge. In other drivers, fence creation and cmdbuf submission normally happen atomically, mutex_lock(); fence = dma_fence_create(..., ++timeline->seqno); submit_cmdbuf(); mutex_unlock(); and have no such issue. But in our driver, because most ioctls queue commands into ctrlq, we do not want to grab a lock. Instead, we set seqno to 0 when a fence is created, and update it when the command is finally queued and the seqno is known. Signed-off-by:
-
Fabien Dessenne authored
During probe, return the "clk_get" error value instead of -ENODEV. Signed-off-by:
Fabien Dessenne <fabien.dessenne@st.com> Acked-by:
Philippe Cornu <philippe.cornu@st.com> Signed-off-by:
Benjamin Gaignard <benjamin.gaignard@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/1556114601-30936-3-git-send-email-fabien.dessenne@st.com
-
Fabien Dessenne authored
Manage the -EPROBE_DEFER error case for the ltdc IRQ. Signed-off-by:
-
- 03 May, 2019 8 commits
-
-
Robin Murphy authored
Re-reading the feature registers for the sake of displaying the raw values seems pointless, and in fact showing the copies that we've already read and stored is arguably more useful in terms of giving exposure to any potential bugs in that part of the process. Signed-off-by:
Robin Murphy <robin.murphy@arm.com> Signed-off-by:
-
Robin Murphy authored
Probe deferral is far from "fatal". Signed-off-by:
-
Robin Murphy authored
Make sure to disable runtime PM again if probe fails after we've enabled it. Otherwise, any subsequent attempt to re-probe starts triggering "Unbalanced pm_runtime_enable!" assertions from the driver core. Signed-off-by:
-
Robin Murphy authored
The DMA masks need to be set correctly before any DMA API activity kicks off, and the current point in panfrost_probe() is way too late in that regard. since panfrost_mmu_init() has already set up a live address space and DMA-mapped MMU pagetables. We can't set masks until we've queried the appropriate value from MMU_FEATURES, but as soon as reasonably possible after that should suffice. Signed-off-by:
-
Tomeu Vizoso authored
So userspace can get feedback on any error conditions, instead of going ahead and things breaking later. Signed-off-by:
Tomeu Vizoso <tomeu.vizoso@collabora.com> Signed-off-by:
-
Sean Paul authored
Merging some panfrost fixes as well as one rockchip fix that _just_ missed feature freeze. Signed-off-by: -
Lucas Stach authored
If there is a match in the HW DB, the function is left early, before inititalizing the idle mask. Fix this by doing the init earlier, as only old GPUs, not present in the HW DB need a different idle mask. Signed-off-by:
Lucas Stach <l.stach@pengutronix.de> Reviewed-by:
Philipp Zabel <p.zabel@pengutronix.de>
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
- SR-IOV fixes - Raven flickering fix - Misc spelling fixes - Vega20 power fixes - Freesync improvements - DC fixes Signed-off-by:
-
- 02 May, 2019 7 commits
-
-
Dave Airlie authored
Merge tag 'drm-intel-next-fixes-2019-05-02' of git://anongit.freedesktop.org/drm/drm-intel into drm-next - Whitelist a register to avoid media driver from hanging Signed-off-by:
-
Andrey Grodzovsky authored
Also reject TDRs if another one already running. v2: Stop all schedulers across device and entire XGMI hive before force signaling HW fences. Avoid passing job_signaled to helper fnctions to keep all the decision making about skipping HW reset in one place. v3: Fix SW sched. hang after non HW reset. sched.hw_rq_count has to be balanced against it's decrement in drm_sched_stop in non HW reset case. v4: rebase v5: Revert v3 as we do it now in sceduler code. Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Andrey Grodzovsky <andrey.grodzovsky@amd.com> Signed-off-by:
-
Andrey Grodzovsky authored
Problem: Sched thread's cleanup function races against TO handler and removes the guilty job from mirror list and we have no way of differentiating if the job was removed from within the TO handler or from the sched thread's clean-up function. Fix: Add a flag to scheduler to hint the TO handler that the guilty job needs to be explicitly released. v2: whitespace fix Reviewed-by:
-
Andrey Grodzovsky authored
For later driver's reference to see if the fence is signaled. v2: Move parent fence put to resubmit jobs. Signed-off-by:
-
Christian König authored
We now destroy finished jobs from the worker thread to make sure that we never destroy a job currently in timeout processing. By this we avoid holding lock around ring mirror list in drm_sched_stop which should solve a deadlock reported by a user. v2: Remove unused variable. v4: Move guilty job free into sched code. v5: Move sched->hw_rq_count to drm_sched_start to account for counter decrement in drm_sched_stop even when we don't call resubmit jobs if guily job did signal. v6: remove unused variable Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109692Acked-by:
Chunming Zhou <david1.zhou@amd.com> Signed-off-by:
-
Lionel Landwerlin authored
Unfortunately userspace users of this API cannot be publicly disclosed yet. This commit effectively disables timeline syncobj ioctls for all drivers. Each driver wishing to support this feature will need to expose DRIVER_SYNCOBJ_TIMELINE. v2: Add uAPI capability check (Christian) Signed-off-by:
Lionel Landwerlin <lionel.g.landwerlin@intel.com> Reviewed-by: Christian König <christian.koenig@amd.com> (v1) Cc: Dave Airlie <airlied@redhat.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Christian König <christian.koenig@amd.com> Cc: Chunming Zhou <david1.zhou@amd.com> Reviewed-by:
-
Lionel Landwerlin authored
We've been somewhat inconsistent when adding the new ioctl and returned ENODEV instead of EOPNOTSUPPORTED upon failing the syncobj capibility. Signed-off-by:
-
