Add documentation for the TPDM and TPDA under trace/coresight.
Signed-off-by: Mao Jinlong <quic_jinlmao@quicinc.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230117145708.16739-9-quic_jinlmao@quicinc.com

Adds new coresight-tpda.yaml file describing the bindings required
to define tpda in the device trees.
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Tao Zhang <quic_taozha@quicinc.com>
Signed-off-by: Mao Jinlong <quic_jinlmao@quicinc.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230117145708.16739-8-quic_jinlmao@quicinc.com

TPDA(Trace, Profiling and Diagnostics Aggregator) is
to provide packetization, funneling and timestamping of
TPDM data. Multiple monitors are connected to different
input ports of TPDA.This change is to add tpda
enable/disable/probe functions for coresight tpda driver.

 - - - -         - - - -        - - - -
| TPDM 0|      | TPDM 1 |     | TPDM 2|
 - - - -         - - - -        - - - -
    |               |             |
    |_ _ _ _ _ _    |     _ _ _ _ |
                |   |    |
                |   |    |
           ------------------
          |        TPDA      |
           ------------------
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Tao Zhang <quic_taozha@quicinc.com>
Signed-off-by: Mao Jinlong <quic_jinlmao@quicinc.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230120095301.30792-2-quic_jinlmao@quicinc.com

Integration test for tpdm can help to generate the data for
verification of the topology during TPDM software bring up.

Sample:
echo 1 > /sys/bus/coresight/devices/tmc_etf0/enable_sink
echo 1 > /sys/bus/coresight/devices/tpdm0/enable_source
echo 1 > /sys/bus/coresight/devices/tpdm0/integration_test
echo 2 > /sys/bus/coresight/devices/tpdm0/integration_test
cat /dev/tmc_etf0 > /data/etf-tpdm0.bin
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Tao Zhang <quic_taozha@quicinc.com>
Signed-off-by: Mao Jinlong <quic_jinlmao@quicinc.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230117145708.16739-6-quic_jinlmao@quicinc.com

TPDM serves as data collection component for various dataset types.
DSB(Discrete Single Bit) is one of the dataset types. DSB subunit
can be enabled for data collection by writing 1 to the first bit of
DSB_CR register. This change is to add enable/disable function for
DSB dataset by writing DSB_CR register.
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Tao Zhang <quic_taozha@quicinc.com>
Signed-off-by: Mao Jinlong <quic_jinlmao@quicinc.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230117145708.16739-5-quic_jinlmao@quicinc.com

Add new coresight-tpdm.yaml file describing the bindings required
to define tpdm in the device trees.
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Tao Zhang <quic_taozha@quicinc.com>
Signed-off-by: Mao Jinlong <quic_jinlmao@quicinc.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230117145708.16739-4-quic_jinlmao@quicinc.com

Add driver to support Coresight device TPDM (Trace, Profiling and
Diagnostics Monitor). TPDM is a monitor to collect data from
different datasets. This change is to add probe/enable/disable
functions for tpdm source.
Signed-off-by: Tao Zhang <quic_taozha@quicinc.com>
Signed-off-by: Mao Jinlong <quic_jinlmao@quicinc.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230120095301.30792-1-quic_jinlmao@quicinc.com

Except stm, there could be other sources which are not associated
with cpus. Use IDR to store and search these sources' paths.
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Mao Jinlong <quic_jinlmao@quicinc.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230117145708.16739-2-quic_jinlmao@quicinc.com

Adds in a number of pr_debug macros to allow the debugging and test of
the trace ID allocation system.
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230116124928.5440-15-mike.leach@linaro.org

Use the perf_report_aux_output_id() call to output the CoreSight trace ID
and associated CPU as a PERF_RECORD_AUX_OUTPUT_HW_ID record in the
perf.data file.
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230116124928.5440-14-mike.leach@linaro.org

CoreSight trace being updated to use the perf_report_aux_output_id()
in a similar way to intel-pt.

This function in needs export visibility to allow it to be called from
kernel loadable modules, which CoreSight may configured to be built as.
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230116124928.5440-12-mike.leach@linaro.org

Removes legacy coresight_get_trace_id() function now its use has been
removed from the ETM code.
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230116124928.5440-9-mike.leach@linaro.org

CoreSight sources provide a callback (.trace_id) in the standard source
ops which returns the ID to the core code. This was used to check that
sources all had a unique Trace ID.

Uniqueness is now gauranteed by the Trace ID allocation system, and the
check code has been removed from the core.

This patch removes the unneeded and unused .trace_id source ops
from the ops structure and implementations in etm3x, etm4x and stm.
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230116124928.5440-8-mike.leach@linaro.org

Use the TraceID API to allocate ETM trace IDs dynamically.

As with the etm4x we allocate on enable / disable for perf,
allocate on enable / reset for sysfs.

Additionally we allocate on sysfs file read as both perf and sysfs
can read the ID before enabling the hardware.

Remove sysfs option to write trace ID - which is inconsistent with
both the dynamic allocation method and the fixed allocation method
previously used.
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230116124928.5440-7-mike.leach@linaro.org

The trace ID API is now used to allocate trace IDs for ETM4.x / ETE
devices.

For perf sessions, these will be allocated on enable, and released on
disable.

For sysfs sessions, these will be allocated on enable, but only released
on reset. This allows the sysfs session to interrogate the Trace ID used
after the session is over - maintaining functional consistency with the
previous allocation scheme.

The trace ID will also be allocated on read of the mgmt/trctraceid file.
This ensures that if perf or sysfs read this before enabling trace, the
value will be the one used for the trace session.

Trace ID initialisation is removed from the _probe() function.
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230116124928.5440-6-mike.leach@linaro.org

Updates the STM driver to use the trace ID allocation API.
This uses the _system_id calls to allocate an ID on device poll,
and release on device remove.

The sysfs access to the STMTRACEIDR register has been changed from RW
to RO. Having this value as writable is not appropriate for the new
Trace ID scheme - and had potential to cause errors in the previous
scheme if values clashed with other sources.
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230116124928.5440-5-mike.leach@linaro.org

Adds in calls to allocate and release Trace ID for the CPUs in use
by the perf session.

Adds in notifier calls to the trace ID allocator that perf
events are starting and stopping.

This ensures that Trace IDs associated with CPUs remain the same
throughout the perf session, and are only released when all perf
sessions are complete.
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230116124928.5440-4-mike.leach@linaro.org

The checks for sources to have unique IDs has been removed - this is now
guaranteed by the ID allocation mechanisms, and inappropriate where
multiple ID maps are in use in larger systems
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230116124928.5440-3-mike.leach@linaro.org

The existing mechanism to assign Trace ID values to sources is limited
and does not scale for larger multicore / multi trace source systems.

The API introduces functions that reserve IDs based on availabilty
represented by a coresight_trace_id_map structure. This records the
used and free IDs in a bitmap.

CPU bound sources such as ETMs use the coresight_trace_id_get_cpu_id
coresight_trace_id_put_cpu_id pair of functions. The API will record
the ID associated with the CPU. This ensures that the same ID will be
re-used while perf events are active on the CPU. The put_cpu_id function
will pend release of the ID until all perf cs_etm sessions are complete.

For backward compatibility the functions will attempt to use the same
CPU IDs as the legacy system would have used if these are still available.

Non-cpu sources, such as the STM can use coresight_trace_id_get_system_id /
coresight_trace_id_put_system_id.
Signed-off-by: Mike Leach <mike.leach@linaro.org>
[ Fix checkpatch warning in drivers/hwtracing/coresight/coresight-trace-id.c ]
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230116124928.5440-2-mike.leach@linaro.org

Add missing entries for the perf userspace part of this driver.
Also add Jonathan as the maintainer for his expertise on this
driver and PCIe stuffs.
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230112112201.16283-2-yangyicong@huawei.com

The PTT device can only support the devices on the same PCIe core,
within BDF range [lower_bdf, upper_bdf]. It's not correct to assume
the devices on the root bus are from the same PCIe core, there are
cases that root ports from different PCIe core are sharing the same
bus. So check when initializing the filters list.

Fixes: ff0de066 ("hwtracing: hisi_ptt: Add trace function support for HiSilicon PCIe Tune and Trace device")
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230112112201.16283-1-yangyicong@huawei.com

platform_get_resource() returns NULL pointer not PTR_ERR(), replace
the IS_ERR() check with NULL pointer check.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230118074920.1772141-1-yangyingliang@huawei.com

Bring in documentation for UltraSoc SMB driver.
It simply describes the device, sysfs interface and the
firmware bindings.
Signed-off-by: Qi Liu <liuqi115@huawei.com>
Signed-off-by: Junhao He <hejunhao3@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230114101302.62320-3-hejunhao3@huawei.com

Add driver for UltraSoc SMB(System Memory Buffer) device.
SMB provides a way to buffer messages from ETM, and store
these "CPU instructions trace" in system memory.
The SMB device is identifier as ACPI HID "HISI03A1". Device
system memory address resources are allocated using the _CRS
method and buffer modes is the circular buffer mode.

SMB is developed by UltraSoc technology, which is acquired by
Siemens, and we still use "UltraSoc" to name driver.
Signed-off-by: Qi Liu <liuqi115@huawei.com>
Signed-off-by: Junhao He <hejunhao3@huawei.com>
Tested-by: JunHao He <hejunhao3@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230114101302.62320-2-hejunhao3@huawei.com

enable_req_count is only ever accessed inside the spinlock, so to avoid
confusion that there are concurrent accesses and simplify the code,
change it to an int.

One access outside of the spinlock is in enable_show() which appears to
allow partially written data to be displayed between enable_req_count,
powered and enabled so move this one inside the spin lock too.
Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230110110736.2709917-4-james.clark@arm.com

In commit 6746eae4 ("coresight: cti: Fix hang in cti_disable_hw()")
PM runtime calls are removed from cti_enable_hw/cti_disable_hw. When
enabling CTI by writing enable sysfs node, clock for accessing CTI
register won't be enabled. Device will crash due to register access
issue. Add PM runtime call in enable_store to fix this issue.

Fixes: 6746eae4 ("coresight: cti: Fix hang in cti_disable_hw()")
Signed-off-by: Mao Jinlong <quic_jinlmao@quicinc.com>
[Change to only call pm_runtime_put if a disable happened]
Tested-by: Jinlong Mao <quic_jinlmao@quicinc.com>
Signed-off-by: James Clark <james.clark@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230110110736.2709917-3-james.clark@arm.com

Writing 0 to the enable control repeatedly results in a negative value
for enable_req_count. After this, writing 1 to the enable control
appears to not work until the count returns to positive.

Change it so that it's impossible for enable_req_count to be < 0.
Return an error to indicate that the disable request was invalid.

Fixes: 835d722b ("coresight: cti: Initial CoreSight CTI Driver")
Tested-by: Jinlong Mao <quic_jinlmao@quicinc.com>
Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230110110736.2709917-2-james.clark@arm.com

The TRCSEQRSTEVR and TRCSEQSTR registers are not implemented if the
TRCIDR5.NUMSEQSTATE == 0. Skip accessing the registers in such cases.

Fixes: 2e1cdfe1 ("coresight-etm4x: Adding CoreSight ETM4x driver")
Signed-off-by: Junhao He <hejunhao3@huawei.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230114091632.60095-1-hejunhao3@huawei.com

Pull perf fixes from Borislav Petkov:

 - Pass only an initialized perf event attribute to the LSM hook

 - Fix a use-after-free on the perf syscall's error path

 - A potential integer overflow fix in amd_core_pmu_init()

 - Fix the cgroup events tracking after the context handling rewrite

 - Return the proper value from the inherit_event() function on error

* tag 'perf_urgent_for_v6.2_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/core: Call LSM hook after copying perf_event_attr
  perf: Fix use-after-free in error path
  perf/x86/amd: fix potential integer overflow on shift of a int
  perf/core: Fix cgroup events tracking
  perf core: Return error pointer if inherit_event() fails to find pmu_ctx

Pull x86 fixes from Borislav Petkov:

 - Two fixes to correct how kprobes handles INT3 now that they're added
   by other functionality like the rethunks and not only kgdb

 - Remove __init section markings of two functions which are referenced
   by a function in the .text section

* tag 'x86_urgent_for_v6.2_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/kprobes: Fix optprobe optimization check with CONFIG_RETHUNK
  x86/kprobes: Fix kprobes instruction boudary check with CONFIG_RETHUNK
  x86/calldepth: Fix incorrect init section references

Pull locking fixes from Borislav Petkov:

 - Prevent the leaking of a debug timer in futex_waitv()

 - A preempt-RT mutex locking fix, adding the proper acquire semantics

* tag 'locking_urgent_for_v6.2_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  futex: Fix futex_waitv() hrtimer debug object leak on kcalloc error
  rtmutex: Add acquire semantics for rtmutex lock acquisition slow path

Pull drm fixes from Daniel Vetter:
 "I'm just back from the mountains, and Dave is out at the beach and
  should be back in a week again. Just i915 fixes and since Rodrigo
  bothered to make the pull last week I figured I should warm up gpg and
  forward this in a nice signed tag as a new years present!

   - i915 fixes for newer platforms

   - i915 locking rework to not give up in vm eviction fallback path too
     early"

* tag 'drm-fixes-2023-01-01' of git://anongit.freedesktop.org/drm/drm:
  drm/i915/dsi: fix MIPI_BKLT_EN_1 native GPIO index
  drm/i915/dsi: add support for ICL+ native MIPI GPIO sequence
  drm/i915/uc: Fix two issues with over-size firmware files
  drm/i915: improve the catch-all evict to handle lock contention
  drm/i915: Remove __maybe_unused from mtl_info
  drm/i915: fix TLB invalidation for Gen12.50 video and compute engines

Merge tag 'drm-intel-fixes-2022-12-30' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

- fix TLB invalidation for DG2 and newer platforms. (Andrzej)
- Remove __maybe_unused from mtl_info (Lucas)
- improve the catch-all evict to handle lock contention (Matt Auld)
- Fix two issues with over-size (GuC/HuC) firmware files (John)
- Fix DSI resume issues on ICL+ (Jani)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Y662ijDHrZCjTFla@intel.com

Merge tag 'kbuild-fixes-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Fix broken BuildID

 - Add srcrpm-pkg to the help message

 - Fix the option order for modpost built with musl libc

 - Fix the build dependency of rpm-pkg for openSUSE

* tag 'kbuild-fixes-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  fixdep: remove unneeded <stdarg.h> inclusion
  kbuild: sort single-targets alphabetically again
  kbuild: rpm-pkg: add libelf-devel as alternative for BuildRequires
  kbuild: Fix running modpost with musl libc
  kbuild: add a missing line for help message
  .gitignore: ignore *.rpm
  arch: fix broken BuildID for arm64 and riscv
  kconfig: Add static text for search information in help menu

Pull ata fix from Damien Le Moal:
 "A single fix to address an issue with wake from suspend with PCS
  adapters, from Adam"

* tag 'ata-6.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
  ata: ahci: Fix PCS quirk application for suspend

Pull ACPI fixes from Rafael Wysocki:
 "These are new ACPI IRQ override quirks, low-power S0 idle (S0ix)
  support adjustments and ACPI backlight handling fixes, mostly for
  platforms using AMD chips.

  Specifics:

   - Add ACPI IRQ override quirks for Asus ExpertBook B2502, Lenovo
     14ALC7, and XMG Core 15 (Hans de Goede, Adrian Freund, Erik
     Schumacher).

   - Adjust ACPI video detection fallback path to prevent
     non-operational ACPI backlight devices from being created on
     systems where the native driver does not detect a suitable panel
     (Mario Limonciello).

   - Fix Apple GMUX backlight detection (Hans de Goede).

   - Add a low-power S0 idle (S0ix) handling quirk for HP Elitebook 865
     and stop using AMD-specific low-power S0 idle code path for systems
     with Rembrandt chips and newer (Mario Limonciello)"

* tag 'acpi-6.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: x86: s2idle: Stop using AMD specific codepath for Rembrandt+
  ACPI: x86: s2idle: Force AMD GUID/_REV 2 on HP Elitebook 865
  ACPI: video: Fix Apple GMUX backlight detection
  ACPI: resource: Add Asus ExpertBook B2502 to Asus quirks
  ACPI: resource: do IRQ override on Lenovo 14ALC7
  ACPI: resource: do IRQ override on XMG Core 15
  ACPI: video: Don't enable fallback path for creating ACPI backlight by default
  drm/amd/display: Report to ACPI video if no panels were found
  ACPI: video: Allow GPU drivers to report no panels

Pull sound fixes from Takashi Iwai:
 "Just a few small fixes:

   - A regression fix for HDMI audio on HD-audio AMD codecs

   - Fixes for LINE6 MIDI handling

   - HD-audio quirk for Dell laptops"

* tag 'sound-6.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda/hdmi: Static PCM mapping again with AMD HDMI codecs
  ALSA: hda/realtek: Apply dual codec fixup for Dell Latitude laptops
  ALSA: line6: fix stack overflow in line6_midi_transmit
  ALSA: line6: correct midi status byte when receiving data from podxt

Merge ACPI resource handling quirks and ACPI backlight handling fixes
for 6.2-rc2:

 - Add ACPI IRQ override quirks for Asus ExpertBook B2502, Lenovo
   14ALC7, and XMG Core 15 (Hans de Goede, Adrian Freund,  Erik
   Schumacher).

 - Adjust ACPI video detection fallback path to prevent non-operational
   ACPI backlight devices from being created on systems where the native
   driver does not detect a suitable panel (Mario Limonciello).

 - Fix Apple GMUX backlight detection (Hans de Goede).

* acpi-resource:
  ACPI: resource: Add Asus ExpertBook B2502 to Asus quirks
  ACPI: resource: do IRQ override on Lenovo 14ALC7
  ACPI: resource: do IRQ override on XMG Core 15

* acpi-video:
  ACPI: video: Fix Apple GMUX backlight detection
  ACPI: video: Don't enable fallback path for creating ACPI backlight by default
  drm/amd/display: Report to ACPI video if no panels were found
  ACPI: video: Allow GPU drivers to report no panels

Due to copy-paste fail, MIPI_BKLT_EN_1 would always use PPS index 1,
never 0. Fix the sloppiest commit in recent memory.

Fixes: 963bbdb3 ("drm/i915/dsi: add support for ICL+ native MIPI GPIO sequence")
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221220140105.313333-1-jani.nikula@intel.com
(cherry picked from commit a561933c)
Cc: stable@vger.kernel.org # 6.1
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>