- 22 Aug, 2022 3 commits
-
-
Arunpravin Paneer Selvam authored
Implemented a new intersect and compatible callback functions to ttm range manager fetching start offset from drm mm range allocator. Signed-off-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com> Reviewed-by:
-
Arunpravin Paneer Selvam authored
We are adding two new callbacks to ttm resource manager function to handle intersection and compatibility of placement and resources. v2: move the amdgpu and ttm_range_manager changes to separate patches (Christian) v3: rename "intersect" to "intersects" (Matthew) v4: move !place check to the !res if and return false in ttm_resource_compatible() function (Christian) v5: move bits of code from patch number 6 to avoid temporary driver breakup (Christian) Signed-off-by: -
Javier Martinez Canillas authored
Drivers' .remove and .shutdown callbacks are executed on different code paths. The former is called when a device is removed from the bus, while the latter is called at system shutdown time to quiesce the device. This means that some overlap exists between the two, because both have to take care of properly shutting down the hardware. But currently the logic used in these two callbacks isn't consistent in msm drivers, which could lead to kernel panic. For example, on .remove the component is deleted and its .unbind callback leads to the hardware being shutdown but only if the DRM device has been marked as registered. That check doesn't exist in the .shutdown logic and this can lead to the driver calling drm_atomic_helper_shutdown() for a DRM device that hasn't been properly initialized. A situation like this can happen if drivers for expected sub-devices fail to probe, since the .bind callback will never be executed. If that is the case, drm_atomic_helper_shutdown() will attempt to take mutexes that are only initialized if drm_mode_config_init() is called during a device bind. This bug was attempted to be fixed in commit 623f279c ("drm/msm: fix shutdown hook in case GPU components failed to bind"), but unfortunately it still happens in some cases as the one mentioned above, i.e: systemd-shutdown[1]: Powering off. kvm: exiting hardware virtualization platform wifi-firmware.0: Removing from iommu group 12 platform video-firmware.0: Removing from iommu group 10 ------------[ cut here ]------------ WARNING: CPU: 6 PID: 1 at drivers/gpu/drm/drm_modeset_lock.c:317 drm_modeset_lock_all_ctx+0x3c4/0x3d0 ... Hardware name: Google CoachZ (rev3+) (DT) pstate: a0400009 (NzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : drm_modeset_lock_all_ctx+0x3c4/0x3d0 lr : drm_modeset_lock_all_ctx+0x48/0x3d0 sp : ffff80000805bb80 x29: ffff80000805bb80 x28: ffff327c00128000 x27: 0000000000000000 x26: 0000000000000000 x25: 0000000000000001 x24: ffffc95d820ec030 x23: ffff327c00bbd090 x22: ffffc95d8215eca0 x21: ffff327c039c5800 x20: ffff327c039c5988 x19: ffff80000805bbe8 x18: 0000000000000034 x17: 000000040044ffff x16: ffffc95d80cac920 x15: 0000000000000000 x14: 0000000000000315 x13: 0000000000000315 x12: 0000000000000000 x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000 x8 : ffff80000805bc28 x7 : 0000000000000000 x6 : 0000000000000000 x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000 x2 : ffff327c00128000 x1 : 0000000000000000 x0 : ffff327c039c59b0 Call trace: drm_modeset_lock_all_ctx+0x3c4/0x3d0 drm_atomic_helper_shutdown+0x70/0x134 msm_drv_shutdown+0x30/0x40 platform_shutdown+0x28/0x40 device_shutdown+0x148/0x350 kernel_power_off+0x38/0x80 __do_sys_reboot+0x288/0x2c0 __arm64_sys_reboot+0x28/0x34 invoke_syscall+0x48/0x114 el0_svc_common.constprop.0+0x44/0xec do_el0_svc+0x2c/0xc0 el0_svc+0x2c/0x84 el0t_64_sync_handler+0x11c/0x150 el0t_64_sync+0x18c/0x190 ---[ end trace 0000000000000000 ]--- Unable to handle kernel NULL pointer dereference at virtual address 0000000000000018 Mem abort info: ESR = 0x0000000096000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x04: level 0 translation fault Data abort info: ISV = 0, ISS = 0x00000004 CM = 0, WnR = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=000000010eab1000 [0000000000000018] pgd=0000000000000000, p4d=0000000000000000 Internal error: Oops: 96000004 [#1] PREEMPT SMP ... Hardware name: Google CoachZ (rev3+) (DT) pstate: a0400009 (NzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : ww_mutex_lock+0x28/0x32c lr : drm_modeset_lock_all_ctx+0x1b0/0x3d0 sp : ffff80000805bb50 x29: ffff80000805bb50 x28: ffff327c00128000 x27: 0000000000000000 x26: 0000000000000000 x25: 0000000000000001 x24: 0000000000000018 x23: ffff80000805bc10 x22: ffff327c039c5ad8 x21: ffff327c039c5800 x20: ffff80000805bbe8 x19: 0000000000000018 x18: 0000000000000034 x17: 000000040044ffff x16: ffffc95d80cac920 x15: 0000000000000000 x14: 0000000000000315 x13: 0000000000000315 x12: 0000000000000000 x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000 x8 : ffff80000805bc28 x7 : 0000000000000000 x6 : 0000000000000000 x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000 x2 : ffff327c00128000 x1 : 0000000000000000 x0 : 0000000000000018 Call trace: ww_mutex_lock+0x28/0x32c drm_modeset_lock_all_ctx+0x1b0/0x3d0 drm_atomic_helper_shutdown+0x70/0x134 msm_drv_shutdown+0x30/0x40 platform_shutdown+0x28/0x40 device_shutdown+0x148/0x350 kernel_power_off+0x38/0x80 __do_sys_reboot+0x288/0x2c0 __arm64_sys_reboot+0x28/0x34 invoke_syscall+0x48/0x114 el0_svc_common.constprop.0+0x44/0xec do_el0_svc+0x2c/0xc0 el0_svc+0x2c/0x84 el0t_64_sync_handler+0x11c/0x150 el0t_64_sync+0x18c/0x190 Code: aa0103f4 d503201f d2800001 aa0103e3 (c8e37c02) ---[ end trace 0000000000000000 ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b Kernel Offset: 0x495d77c00000 from 0xffff800008000000 PHYS_OFFSET: 0xffffcd8500000000 CPU features: 0x800,00c2a015,19801c82 Memory Limit: none ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ]--- Fixes: 9d5cbf5f ("drm/msm: add shutdown support for display platform_driver") Signed-off-by:
Javier Martinez Canillas <javierm@redhat.com> Reviewed-by:
Abhinav Kumar <quic_abhinavk@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220816134612.916527-1-javierm@redhat.com
-
- 19 Aug, 2022 1 commit
-
-
Danilo Krummrich authored
drmm_universal_plane_alloc() already registers drm_plane_cleanup() as managed release action via drmm_add_action_or_reset(). Hence, drm_plane_cleanup() should not be set as drm_plane_funcs.destroy hook. Fixes: 78476288 ("drm/virtio: plane: use drm managed resources") Reviewed-by:
Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
Danilo Krummrich <dakr@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220803145520.1143208-1-dakr@redhat.com
-
- 16 Aug, 2022 1 commit
-
-
Lyude Paul authored
As it turns out: while Nvidia does actually have interlacing knobs on their GPU still pretty much no current GPUs since Volta actually support it. Trying interlacing on these GPUs will result in NVDisplay being quite unhappy like so: nouveau 0000:1f:00.0: disp: chid 0 stat 00004802 reason 4 [INVALID_ARG] mthd 2008 data 00000001 code 00080000 nouveau 0000:1f:00.0: disp: chid 0 stat 10005080 reason 5 [INVALID_STATE] mthd 0200 data 00000001 code 00000001 So let's fix this by following the same behavior Nvidia's driver does and disable interlacing entirely. Signed-off-by:
Lyude Paul <lyude@redhat.com> Cc: stable@vger.kernel.org Reviewed-by:
Karol Herbst <kherbst@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220816180436.156310-1-lyude@redhat.com
-
- 15 Aug, 2022 1 commit
-
-
Maíra Canal authored
This driver includes the deprecated OF GPIO header <linux/of_gpio.h> yet fail to use symbols from it, so drop the include. Cc: Emma Anholt <emma@anholt.net> Cc: Maxime Ripard <mripard@kernel.org> Signed-off-by:
Maíra Canal <mairacanal@riseup.net> Signed-off-by:
Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20220812205746.609107-6-mairacanal@riseup.net
-
- 11 Aug, 2022 4 commits
-
-
Jouni Högander authored
Instead of using fixed 0 - 512 range use luminance range calculated as a part of edid parsing. As a backup fall back to static 0 - 512. v3: Clean-ups suggested by Jani Nikula v2: Use values calculated during edid parsing Cc: Lyude Paul <lyude@redhat.com> Cc: Mika Kahola <mika.kahola@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by:
Jouni Högander <jouni.hogander@intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220719095700.14923-4-jouni.hogander@intel.com
-
Jouni Högander authored
Luminance range calculation was split out into drm_edid.c and is now part of edid parsing. Rely on values calculated during edid parsing and use these for caps->aux_max_input_signal and caps->aux_min_input_signal. v2: Use values calculated during edid parsing Cc: Roman Li <roman.li@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Lyude Paul <lyude@redhat.com> Cc: Mika Kahola <mika.kahola@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Jouni Högander authored
Split luminance min/max calculation using static hdr metadata from drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c:update_connector_ext_caps into drm/drm_edid.c and use it during edid parsing. Calculated range is stored into connector->display_info->luminance_range. Add new data structure (drm_luminance_range_inf) to store luminance range calculated using data from EDID's static hdr metadata block. Add this new struct as a part of drm_display_info struct. v3: Squashed adding drm_luminance_range_info patch here v2: Calculate range during edid parsing Cc: Roman Li <roman.li@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Lyude Paul <lyude@redhat.com> Cc: Mika Kahola <mika.kahola@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by:
-
Liang He authored
The reference 'child' in the iteration of for_each_available_child_of_node() is only escaped out into a local variable which is only used to check its value. So we still need to the of_node_put() when breaking of the for_each_available_child_of_node() which will automatically increase and decrease the refcount. Fixes: ca454bd4 ("drm/pl111: Support the Versatile Express") Signed-off-by:
Liang He <windhl@126.com> Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20220711131550.361350-1-windhl@126.com
-
- 10 Aug, 2022 22 commits
-
-
Lucas Stach authored
Disable the main link PHYs and put them into reset when the main link is disabled. When the PHYs stay enabled while the rest of the DP link circuits are disabled there is some noise on the data lanes, which some displays try to lock onto, waking them up from their low power state. Signed-off-by:
Lucas Stach <l.stach@pengutronix.de> Reviewed-by:
Robert Foss <robert.foss@linaro.org> Reviewed-by:
Marek Vasut <marex@denx.de> Tested-by:
-
Lucas Stach authored
The current CLRSIPO count is marginal and does not work with high DSI clock rates. Increase it a bit to allow the DSI link to work at up to 1Gbps lane speed. Signed-off-by:
-
Lucas Stach authored
There is no need to enforce a specific sync signal polarity on the DPI interface, as we can simply tell the TC358767 which polarities it should expect on the input interface. Signed-off-by:
Marco Felsch <m.felsch@pengutronix.de> Reviewed-by:
-
XueBing Chen authored
The strlcpy should not be used because it doesn't limit the source length. Preferred is strscpy. Signed-off-by:
XueBing Chen <chenxuebing@jari.cn> Signed-off-by:
-
Takashi Iwai authored
BUG_ON() is a tasteless choice as a sanity check for a driver like UDL that isn't really a core code. Replace with WARN_ON() and proper error handling instead. Tested-by:
Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Takashi Iwai authored
At both suspend and disconnect, we should rather cancel the pending URBs immediately. For the suspend case, the display will be turned off, so it makes no sense to process the rendering. And for the disconnect case, the device may be no longer accessible, hence we shouldn't do any submission. Tested-by:
-
Takashi Iwai authored
We need to wait for finishing to process the all URBs after disabling the pipe; otherwise pending URBs may stray at suspend/resume, leading to a possible memory corruption in a worst case. Tested-by:
-
Takashi Iwai authored
UDL driver uses a semaphore for controlling the emptiness of FIFO in a slightly funky way. This patch replaces it with a wait queue and controls the emptiness with the standard wait_event*() macro instead, which is a more straightforward implementation. While we are at it, drop the dead code for delayed semaphore down, too. Tested-by:
-
Thomas Zimmermann authored
Rename the parameter vmap to src in all functions. The parameter contains the locations of the source data and the new name says that. v3: * fix typo in commit message Signed-off-by:
-
Thomas Zimmermann authored
The format-convertion helpers handle several cases for different values of destination buffer and pitch. Move that code into the internal helper drm_fb_xfrm() and avoid quite a bit of duplication. v2: * remove a duplicated blank line (Jose) * use drm_format_info_bpp() (Sam) * fix vaddr_cached_hint bug (Sam) * add TODO on vaddr location (Sam) Signed-off-by:
-
Thomas Zimmermann authored
Update XRGB8888-to-MONO conversion to support struct iosys_map and convert all users. Although these are single-plane color formats, the new interface supports multi-plane formats for consistency with drm_fb_blit(). v2: * rebase after renaming CMA helpers to DMA helpers * update documentation (Sam) Signed-off-by:
Noralf Trønnes <noralf@tronnes.org> Reviewed-by:
-
Thomas Zimmermann authored
Update XRGB8888-to-GRAY8 conversion to support struct iosys_map and convert all users. Although these are single-plane color formats, the new interface supports multi-plane formats for consistency with drm_fb_blit(). v2: * update documentation (Sam) * add TODO on vaddr location (Sam) Signed-off-by:
-
Thomas Zimmermann authored
Update XRGB8888-to-XRGB2101010 conversion to support struct iosys_map and convert all users. Although these are single-plane color formats, the new interface supports multi-plane formats for consistency with drm_fb_blit(). v2: * update documentation (Sam) * add TODO on vaddr location (Sam) Signed-off-by:
-
Thomas Zimmermann authored
Update RGB888-to-XRGB8888 conversion to support struct iosys_map and convert all users. Although these are single-plane color formats, the new interface supports multi-plane formats for consistency with drm_fb_blit(). v2: * add TODO on vaddr location (Sam) Signed-off-by:
-
Thomas Zimmermann authored
Update RGB565-to-XRGB8888 conversion to support struct iosys_map and convert all users. Although these are single-plane color formats, the new interface supports multi-plane formats for consistency with drm_fb_blit(). v2: * add TODO on vaddr location (Sam) Signed-off-by:
-
Thomas Zimmermann authored
Update XRGB8888-to-RGB888 conversion to support struct iosys_map and convert all users. Although these are single-plane color formats, the new interface supports multi-plane formats for consistency with drm_fb_blit(). v2: * update documentation (Sam) * add TODO on vaddr location (Sam) Signed-off-by:
-
Thomas Zimmermann authored
Update XRGB8888-to-RGB565 conversion to support struct iosys_map and convert all users. Although these are single-plane color formats, the new interface supports multi-plane formats for consistency with drm_fb_blit(). v2: * update new Kunit tests * update documentation (Sam) * add TODO on vaddr location (Sam) Signed-off-by:
-
Thomas Zimmermann authored
Update XRGB8888-to-RGB332 conversion to support struct iosys_map and convert all users. Although these are single-plane color formats, the new interface supports multi-plane formats for consistency with drm_fb_blit(). v2: * rebase onto refactored Kunit tests * update documentation (Sam) * add TODO on vaddr location (Sam) Signed-off-by:
-
Thomas Zimmermann authored
Convert drm_fb_swab() to use struct iosys_map() and convert users. The new interface supports multi-plane color formats, but implementation only supports a single plane for now. v2: * use drm_format_info_bpp() (Sam) * update documentation (Sam) * add TODO on vaddr location (Sam) Signed-off-by:
-
Thomas Zimmermann authored
Merge drm_fb_memcpy() and drm_fb_memcpy_toio() into a drm_fb_memcpy() that uses struct iosys_map for buffers. The new function also supports multi-plane color formats. Convert all users of the original helpers. v2: * rebase onto refactored mgag200 * use drm_formap_info_bpp() (Sam) * do static init in hyperv and mgag200 (Sam) * update documentation (Sam) * add TODO on vaddr location (Sam) Signed-off-by:
-
Thomas Zimmermann authored
Provide drm_fb_blit() that works with struct iosys_map. Update all users of drm_fb_blit_toio(), which required a destination buffer in I/O memory. This patch only updates the function's interface. The implementation still relies on the destination buffer to be located in I/O memory. See the follow-up patches for implementational changes. The new function's interface works with multi-plane color formats, but again implementation only supports a single plane for now. v2: * rebase onto refactored simpledrm * use IOSYS_MAP_INIT_VADDR() (Sam) * update the commit message on the use of I/O memory (Sam) Signed-off-by:
-
Thomas Zimmermann authored
Add IOSYS_MAP_INIT_VADDR_IOMEM() for static init of variables of type struct iosys_map. Signed-off-by:
Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by:
-
- 08 Aug, 2022 3 commits
-
-
Adrián Larumbe authored
In the event of a job timeout, debug dump information will be written into /sys/class/devcoredump. Inspired by etnaviv's similar feature. Signed-off-by:
Adrián Larumbe <adrian.larumbe@collabora.com> Reviewed-by:
Steven Price <steven.price@arm.com> Signed-off-by:
-
Adrián Larumbe authored
Each Panfrost job has its own job slot and MMU address space set of registers, which are selected with a job-specific index. Turn the shift and stride used for selection of the right register set base into a define rather than using magic numbers. Signed-off-by:
Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com> Reviewed-by:
-
Zeng Jingxiang authored
A NULL check for bridge->encoder shows that it may be NULL, but it already been dereferenced on all paths leading to the check. 812 if (!bridge->encoder) { Dereference the pointer bridge->encoder. 810 drm_connector_attach_encoder(<9611->connector, bridge->encoder); Signed-off-by:Zeng Jingxiang <linuszeng@tencent.com> Signed-off-by:
-
- 05 Aug, 2022 5 commits
-
-
Thomas Zimmermann authored
Replace the simple-KMS helpers with the regular atomic helpers. The regular helpers are better architectured and therefore allow for easier code sharing among drivers. No functional changes. v3: * remove empty CRTC helpers atomic_{enable, disable} (Javier) * unconditionally run drm_atomic_helper_check_plane_state() Signed-off-by: -
Thomas Zimmermann authored
Compute the framebuffer's scanline stride length if not given by the simplefb data. v3: * get pixel size from drm_format_info_bpp() (Geert, Javier) Signed-off-by:
-
Thomas Zimmermann authored
Replace the remaining uses of the field pdev by upcasts from the Linux device and remove the field. Signed-off-by:
-
Thomas Zimmermann authored
Inline the helpers for initializing the hardware FB, the memory management and the modesetting into the device-creation function. No functional changes. In the original code, init helpers depended on values from other init helpers. Inlining the functions ensures that steps are taken in the correct order. It's also easier to see what happens. The device is simple enough to be set up in one function. Only clocks and regulators are still set up in their own helpers, as their presence is system dependent. Signed-off-by:
-
Thomas Zimmermann authored
Remove the unused mem field from struct simpledrm_device. Signed-off-by:
-
